Synthesis, structure and antitumor activity of [RhCl3(N-N)(DMSO)] polypyridyl complexes

The [RhCl₃(N-N)(DMSO)] complexes, the N-N being 2,2′-bipyridine (1), 1,10-phenanthroline (2), 4,7-diphenyl-1,10-phenanthroline (3), 4,4′-dimethyl-2,2′-bipyridine (4) and 1,10-phenanthroline-5,6-dione (5), have been synthesized and characterized with spectroscopic methods. The compounds 2-5 adopt mer- and complex 1fac-structure. The molecular and electronic structure studies of mer- and fac-complexes with bpy and phen ligands at the DFT B3LYP level with 3-21G^∗∗ basis set showed that mer-isomers are more stable. The cytostatic activity of the [RhCl₃(N-N)(DMSO)] complexes against Caco-2 and A549 tumor cells have been studied. Their antibacterial activity have also been investigated. It has been found that the very promising biological activity show complexes 2, 3 and 4.     

β-Diiminatolanthanoid(III) halides revisited

The crystalline compounds [LnCl₂(L)(thf)₂] [Ln = Ce (1), Tb (2), Yb (3)], [NdI₂(L)(thf)₂] (4), [LnCl(L′)₂] [Ln = Tb (5), Yb (6) (a known compound)] and [YbCl(L′′)(μ-Cl)₂Li(OEt₂)₂] (7) have been prepared [L = {N(C₆H₃Prⁱ₂-2,6)C(H)}₂CPh, L′ = {N(SiMe₃)C(Ph)}₂CH, L′′ = {N(SiMe₃)C(C₆H₄Ph-4)}₂CH]. The X-ray molecular structures of 2-7 have been established; in each, the monoanionic ligand L, L′ or L′′ is N,N′-chelating and essentially π-delocalised. Each of 1-7 was prepared from the appropriate LnCl₃, or for 4 [NdI₃(thf)₂], and an equivalent portion of the appropriate alkali metal [Li for 7, Na for 2, 3 and 5, or K for 1, 4 and 6] β-diiminate in thf; the isolation of exclusively 5 and 6 (rather than the L′ analogues of 2 or 3) is noteworthy, as is the structure of 7 which has no precedent in Group 3 or 4f metal β-diiminato chemistry.     

Copper(II) nitrato and chloro complexes with sterically hindered tridentate ligands: Influence of ligand framework and charge on their structure and physicochemical properties

Copper(II) coordination complexes of the neutral ligand, tris(3-tert-butyl-5-methyl-1-pyrazolyl)methane (L2′), i.e. the copper(II) nitrato complexes [Cu(L2′)(NO₃)][Cu(NO₃)₄]_1/2 (1) and [Cu(L2′)(NO₃)](ClO₄) (2) and the copper(II) chloro complex [Cu(L2′)(Cl)](ClO₄) (3), and its anionic borate analogue, hydrotris(3-tert-butyl-5-methyl-1-pyrazolyl)borate (L2⁻), i.e. the copper(II) nitrato complex [Cu(L2)(NO₃)] (4) and the copper(II) chloro complex [Cu(L2)(Cl)] (5), were synthesized in order to investigate the influence of ligand framework and charge on their structure and physicochemical properties. While X-ray crystallography did not show any definitive trends in terms of copper(II) atom geometry in four-coordinate copper(II) chloro complexes 3 and 5, different structural trends were observed in five-coordinate copper(II) nitrato complexes 1, 2, and 4. These complexes were also characterized by spectroscopic techniques, namely, UV-Vis, ESR, IR/far-IR, and X-ray absorption spectroscopy.     

Cd(II)-NCS/NCO complexes of 1-alkyl-2-(arylazo)imidazole: Single crystal X-ray structure of [Cd(HaaiMe)2(SCN)2]

The reaction of Cd(OAc)₂ · 4H₂O and 1-alkyl-2-(arylazo)imidazole [RaaiR′ where R = H (a), Me (b); R′ = Me (1/3/5), Et (2/4/6)] and NH₄NCS/NaNCO in methanol in 1:2:2 mole ratio has afforded [Cd(RaaiR′)₂(NCS)₂] (3, 4) and [Cd(RaaiR′)₂(NCO)₂] (5, 6) complexes. The complexes are characterized by different physicochemical methods and in one case, the structure was confirmed by single crystal X-ray diffraction study for title compounds.     

Platinum(II) and technetium(I) complexes anchored to ethynylestradiol: a way to drug targeting and delivery

Starting from ethynylestradiol (1), or, more precisely, from its 3,17β-bis-(triethylsilyloxy) derivative 2, two new ligands containing the ethylenediamino motif were synthesised by a Mannich aminomethylation, namely N-methyl-N-(prop-2-ynyl-3-(17α-estradiolyl))-N^′,N^′-dimethylethylenediamine (3) and N-(prop-2-ynyl-3-(17α-estradiolyl))-N^′-methylpiperazine (4). The corresponding platinum(II)-malonato complexes (7 and 8) were prepared through the PtI₂ intermediates (namely 5 and 6) by Dhara’s method. The structures of the two platinum complexes were energy-minimised by molecular mechanics employing the Amber force field. Both ligands were joined to the [^99mTc(CO)₃Cl] moiety, ^99mTc being the chief γ-emitter employed in nuclear medicine. Unfortunately, piperazine ligand 4 afforded complexes that were unstable under physiological conditions. The RBA values for both ligands and complexes derived from 3, measured for the two forms of estrogen receptor, were less than 1%. Such a poor degree of ligand recognition may be due to the partial protonation of the amino groups at physiological pH, making the carrier quite hydrophilic, therefore unsuitable for entering the hydrophobic pocket of estrogen receptors.     

Synthesis, photoluminescence and electrochemiluminescence of ruthenium(II) polypyridyl complexes based on bipyridine derivatives with carbazole moieties

Six complexes (1-6) with the type of [Ru(bpy)₂L]X₂ (1-3: L = L1-L3, X = Cl⁻; 4-6: L = L1-L3, X = PF₆⁻) were synthesized based on 2,2′-bipyridine and three 2,2′-bipyridine derivatives L1, L2 and L3 (L1 = 5,5′-dibromo-2,2′-bipyridine, L2 = 5-bromo-5′-carbazolyl-2,2′-bipyridine, L3 = 5,5′-dicarbazolyl-2,2′-bipyridine). The complexes 1-6 were characterized by ¹H NMR, MS(ESI) and IR spectra, along with the X-ray crystal structure analysis for 1, 5 and 6. Their photophysical properties and electrochemiluminescence (ECL) properties were investigated in detail. In the UV-Vis absorption spectra, all complexes 1-6 show strong intraligand (π → π^∗) transitions and metal-ligand charge transfer (MLCT, dπ (Ru) → π^∗) bands. Upon the excitation wavelengths at ∼508 nm, all complexes 1-6 exhibit typical MLCT emission of ruthenium(II) polypyridyl complexes. The introduction of carbazole moieties improves the MLCT absorption and emission intensity. The ruthenium(II) complexes 1-6 exhibit good electrochemiluminescence (ECL) properties in [Ru(bpy)₂L]²⁺/tri-n-propylamine (TPrA) acetonitrile solution and the complexes with PF₆⁻ showed higher ECL emission intensity than that of the complexes with Cl⁻ based on the same ligands.     

Study of the coordination behaviour of (3,5-diphenyl-1H-pyrazol-1-yl)ethanol against Pd(II), Zn(II) and Cu(II)

A new easily synthetic route with a 96% yield of ligand 2-(3,5-diphenyl-1H-pyrazol-1-yl)ethanol (L) is obtained. The reactivity of L against Pd(II), Zn(II) and Cu(II) leads to [PdCl₂(L)₂] (1), [ZnCl₂(L)] (2) and [CuCl(L′)]₂ (3) (L′ is the ligand L without alcoholic proton), respectively. According to the different geometries imposed by the metallic centre and the capability of L to present various coordination links, it has been obtained complexes with square planar (1 and 3) or tetrahedral (2) geometry and different nuclearity: monomeric (1 and 2) or dimeric (3). Complete characterisation by analytical and spectroscopic methods, resolution of L and 1-3 by single-crystal X-ray diffraction and magnetic studies for complex 3 are presented.     

Hydrothermal synthesis of copper complexes of 4′-pyridyl terpyridine: From discrete monomer to zigzag chain polymer

Seven copper complexes [Cu(L1)I₂] (1), [Cu₂(L1)₂I₂]₂[Cu₂(μ-I)₂I₂] (2), [Cu(L2)I₂] (3), [Cu₂(L2)(μ-I)I(PPh₃)] (4), [Cu₄(L2)₂(μ-I)₂I₂] (5), {[Cu(L2)I]₂[Cu₂(μ-I)₂I₂]}_n (6) and [Cu₂(L2)(μ-I)₂]_n (7) have been prepared by reactions of ligands: 4′-(2-pyridyl)-2,2′:6′,2″-terpyridine (L1) and 4′-(3-pyridyl)-2,2′:6′,2″-terpyridine (L2) with CuI in hydrothermal conditions, respectively. By alternating the oxidations states of the metal centers, increasing stoichiometric metal/ligand ratio and introducing a second ligand, the compounds, were successfully developed from mononuclear (1 and 3) to multinuclear (2, 4 and 5) and polymers (6 and 7). The synthesis of these compounds may provide an approach for the construction of coordination compounds of 4′-pyridyl terpyridine with different nuclearity.     

Synthesis and reactivity with amines of new diiron alkynyl methoxy carbene complexes

The new diiron alkynyl methoxy carbene complexes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO){C(OMe)CCR′}(Cp)₂]⁺ (R = 2,6-Me₂C₆H₃ (Xyl), R′ = Tol, 3a; R = Xyl, R′ = Ph, 3b; R = Xyl, R′=Buⁿ, 3c; R = Xyl, R′=SiMe₃, 3d; R = Me, R′ = Tol, 3e; R = Me, R′ = Ph, 3f) are obtained in two steps by addition of R′CCLi (R′ = Tol, Ph, Buⁿ, SiMe₃) to the carbonyl aminocarbyne complexes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)₂(Cp)₂]⁺ (R = Xyl, 1a; Me, 1b), followed by methylation of the resulting alkynyl acyl compounds [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO){C(O)CCR′}(Cp)₂] (R = Xyl, R′ = Tol, 2a; R = Xyl, R′ = Ph, 2b; R = Xyl, R′ = Buⁿ, 2c; R = Xyl, R′ = SiMe₃, 2d; R = Me, R′ = Tol, 2e; R = Me, R′ = Ph, 2f). Complexes 3 react with secondary amines (i.e., Me₂NH, C₅H₁₀NH) to give the 4-amino-1-metalla-1,3-dienes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO){C(OMe)CHC(R′)(NMe₂)}(Cp)₂]⁺ (R = Xyl, R′ = Tol, 4a; R = Xyl, R′ = Ph, 4b; R = Me, R′ = Ph, 4c) and [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(OMe)CHC(Tol)(NC₅H₁₀)}(Cp)₂]⁺, 5. The addition occurs stereo-selectively affording only the E-configured products. Analogously, addition of primary amines R′NH₂ (R′ = Ph, Et, Prⁱ) affords the 4-(NH-amino)-1-metalla-1,3-diene complexes [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(OMe)CHC(R)(NHR′)}(Cp)₂]⁺ (R = Ph, 6a; Et, 6b; Prⁱ, 6c). In the case of 6a, only the E isomer is formed, whereas a mixture of the E and Z isomers is present in the case of 6b,c, with prevalence of the latter. Moreover, the two isomeric forms exist under dynamic equilibrium conditions, as shown by VT NMR studies. Complexes 6 are deprotonated by strong bases (e.g., NaH) resulting in the formation of the neutral vinyl imine complexes [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(OMe)CHC(NR)(Tol)}(Cp)₂] (R = Ph, 7a; Et, 7b; Prⁱ, 7c); the reaction can be reverted by addition of strong acids. X-ray crystal structures have been determined for 3a[CF₃SO₃] · Et₂O, 4c[CF₃SO₃], 6a[BF₄] · CH₂Cl₂, 6c[CF₃SO₃] · 0.5Et₂O and 7a · CH₂Cl₂.     

Spectroscopic and electrochemical properties of heteroleptic cationic copper complexes bis-(diphenylphosphino)alkane-(2,2′-biquinoline)copper(I). Crystal structure of bis(diphenylphosphino)ethane-(2,2′-biquinoline)copper(I) perchlorate

A series of [Cu^(I)(2,2′-biquinoline)(L)](ClO₄) complexes (L = bis(diphenylphosphino)methane (bppm), 1,2-bis(diphenylphosphino)ethane (bppe), 1,4-bis(diphenylphosphino)butane (bppb)) have been synthesized and characterized by elemental analysis, conductivity, ESI-mass, NMR and UV-Vis spectroscopies, cyclic voltammetry, X-ray diffraction ([Cu^(I)(2,2′-biquinoline)(bppe)](ClO₄)) and DFT calculations. These compounds are monometallic species in a distorted tetrahedral arrangement, in contrast with related compounds found as dinuclear according to diffraction studies. The spectroscopic properties are not directly correlated with the length of alkyl chain bridge between the bis-diphenylphosphine groups. In this way, the chemical shift of some 2,2′-biquinoline protons and the metal to ligand charge transfer (Cu to 2,2′-biquinoline) follows the order [Cu(2,2′-biquinoline)(bppm)](ClO₄), [Cu(2,2′-biquinoline)(bppb)](ClO₄), [Cu(2,2′-biquinoline)(bppe)](ClO₄). The same dependence is followed by the potentials to Cu(II)/Cu(I) couple. These results are discussed in terms of inter-phosphorus alkane chain length and tetrahedral distortions on copper.     

Protonated 4′-(2-pyridyl)-2,2′:6′,2″-terpyridine and its Fe(II) bischelates: Syntheses and molecular structures

Compounds of the molecular formulae, [LH₃](NO₃)₃ (1), [Fe(LH)₂](PF₆)₄·5H₂O (2), [Fe(L)₂][Fe(L)(LH)](PF₆)₅·H₂O (3), [Fe(L)₂][Fe(L)(LH)](BF₄)₅·2H₂O (4) and [Fe(L)₂](Cr₂O₇)·6H₂O (5) have been synthesized using 4′-(2-pyridyl)-2,2′:6′,2″-terpyridine (L). The molecular structures of all the compounds were determined. The Fe(II) complexes are high spin in nature at room temperature and upon cooling a gradual spin-transition is observed. Among 1-5, hydrogen-bonding, π···π, and anion···π interactions as well as water tetramer and pentamer are present in the molecular packing.     

New pyridyl modified phosphines: Synthesis and late transition-metal coordination studies

Using a phosphorus based Mannich condensation reaction the new pyridylphosphines {5-Ph₂PCH₂N(H)}C₅H₃(2-Cl)N (1-Cl) and {2-Ph₂PCH₂N(H)}C₅H₃(5-Br)N (1-Br) have been synthesised in good yields (60% and 88%, respectively) from Ph₂PCH₂OH and the appropriate aminopyridine. The ligands 1-Cl and 1-Br display variable coordination modes depending on the choice of late transition-metal complex used. Hence P-monodentate coordination has been observed for the mononuclear complexes AuCl(1-Cl) (2), AuCl(1-Br) (3), RuCl₂(p-cymene)(1-Cl) (4), RuCl₂(p-cymene)(1-Br) (5), RhCl₂(Cp^∗)(1-Cl) (6), RhCl₂(Cp^∗)(1-Br) (7), IrCl₂(Cp^∗)(1-Cl) (8), IrCl₂(Cp^∗)(1′-Cl) (8′), IrCl₂(Cp^∗)(1-Br) (9), cis-/trans-PdCl₂(1-Cl)₂ (10), cis-/trans-PdCl₂(1-Br)₂ (11), cis-PtCl₂(1-Cl)₂ (12) and cis-PtCl₂(1-Br)₂ (13). Reaction of Pd(Me)Cl(cod) (cod = cycloocta-1,5-diene) with either 1 equiv. of 1-Br or the known pyridylphosphines 1′-Cl, 1-OH or 1-H gave the P/N-chelate complexes Pd(Me)Cl(1-Br-1-H) (14)-(17). All new compounds have been fully characterised by spectroscopic and analytical methods. Furthermore the structures of 4, 5, 10 and 16 · (CH₃)₂SO have been elucidated by single crystal X-ray crystallography. A crystal structure of the dinuclear metallocycle trans,trans-[PdCl₂{μ-P/N-{Ph₂PCH₂N(H)}C₅H₄N}]₂ · CHCl₃, 18 · CHCl₃, has also been determined. Here 1-H bridges, using both P and pyridyl N donors, two dichloropalladium centres affording a 12-membered ring with the PdCl₂ units adopting a head-to-tail arrangement.     

Biological evaluation of 3'-O-alkylated analogs of salacinol, the role of hydrophobic alkyl group at 3' position in the side chain on the α-glucosidase inhibitory activity

Four analogs with 3′-O-alkyl groups (9a: CH₃, 9b: C₂H₅, 9c: C₁₃H₂₇ or 9d: CH₂Ph) instead of the 3′-O-sulfate anion in salacinol (1), a naturally occurring potent α-glucosidase inhibitor, were synthesized by the coupling reaction of 1,4-dideoxy-1,4-epithio-d-arabinitols (18a and 18b) with appropriate epoxides (10a-10d). These analogs showed equal or considerably higher inhibitory activity against rat small intestinal α-glucosidases than the original sulfate (1), and one of them (9d) was found more potent than currently used α-glucosidase inhibitors as antidiabetics. Thus, introduction of a hydrophobic moiety at the C3′ position of this new class of inhibitor was found beneficial for onset of stronger inhibition against these enzymes.     

Aminoalcohols incorporating a piperazine ring: Synthesis, complexation of a hexadentate ligand and DNA cleavage capability of copper(II) complexes

The facility of aminoalcohol ligand synthesis via ring opening of cyclohexene oxide with polyamines including a piperazine ring is illustrated here with the syntheses and characterization of (2′-hydroxycyclohexyl)piperazine (1), bis(2′-hydroxycyclohexyl)-piperazine (2), 4-{(2″-hydroxycyclohexyl)-2′-aminoethyl)}piperazine (3), 1-(2″-hydroxycyclohexyl)-4-{(2″-hydroxycyclohexyl)-2′-aminoethyl)}piperazine (4), and 1,4-bis[(2″-hydroxycyclohexyl)-3′-aminopropyl]piperazine (5) described, along with an analogue of 4 in which a single -CH₂-CH₂- alkyl chain replaces the piperazine ring, 1,5-bis[(2′-hydroxycyclohexyl)amine]-3-azapentane (6). The viability of 5 as a hexadentate ligand was established by preparation of its copper(II) complex and subsequent X-ray crystal structure analysis. The complex [Cu(5)](ClO₄)₂ cation lies in a distorted octahedral environment with the four nitrogen donors in an approximate plane also incorporating the copper (Cu-N_tert 2.058(4) A; Cu-N_sec 2.072(4) A) and the two alcohol groups occupying axial sites with elongated bonds (Cu-O 2.415(3) A). The piperazine ring adopts a ‘butterfly wing’ geometry, whereas the two cyclohexane rings are in chair conformations. Significant bond angle distortions occur around the copper, exacerbated by the axial Jahn-Teller bond length distortion. The ability of the copper(II) complexes of the aminoalcohols to promote DNA cleavage was examined. Complexes of 2, 3 and 5 are effectively inactive whereas 4 is an efficient single strand cleavage promoter; however, the more flexible close analogue of 4, 6, also proved ineffective. Such observations for a closely related series indicate the subtle influences of spectator ligand rigidity and steric congestion on DNA cleavage promotion.     

Difference in bonding behaviour of azide and thiocyanate to Hg(II)-azoimidazoles

Mercury(II) acetate reacts with the 1-alkyl-2-(arylazo)imidazoles [RaaiR′ where R = H (a), Me (b); R′ = Me (1/3/5), Et (2/4/6)] and sodium azide in methanol solution to afford azido bridged polymeric complexes [Hg(RaaiR′)(N₃)₂]_n (3/4). On setting up similar reaction condition, the reaction of Hg(OAc)₂ with RaaiR′ and NH₄SCN has yielded, instead of polymer, an ion-pair [Hg(RaaiR′)₄][Hg(SCN)₄] (5/6). The complexes are characterised by elemental analysis, IR, UV-Vis, ¹H NMR spectral data and single-crystal X-ray structures of [Hg(HaaiEt)(μ-1,1-N₃)₂]_n (4a) and [Hg(HaaiEt)₄][Hg(SCN)₄] (6a). The complex 4a is a coordination polymer with end-on (μ-1,1) azido bridge and 6a has tetrahedral structure.     

Synthesis, spectral characterization, and single crystal X-ray structures of a series of manganese-2,2′-bipyridine complexes derived from substituted aromatic carboxylic acids

Reaction of [Mn(2,2′-bpy)₂(OAc)](ClO₄)(H₂O) with a series of aromatic carboxylic acids yields new Mn(II)carboxylates [Mn(2,2′-bpy)₂(L)](ClO₄)}₂ (1-3), [Mn(2,2′-bpy)₂(L)₂] (4-5) and [Mn(2,2′-bpy)₂(L)(H₂O)](ClO₄) (6) (L = 2-aminobenzoate (2-aba) (1), 4-hydroxybenzoate (4-hba) (2), thiophene-2-carboxylate (2-tca) (3), 2-hydroxynapthoate (2-hnapa) (4), 3,5-diisopropylsalicylic acid (dipsa) (5), 2,4,6-triisopropylbenzoate (tipba) (6)). The new compounds have been characterized with the aid of elemental analysis, spectroscopy, and single-crystal X-ray diffraction studies. Compounds 1-3, which have been synthesized from less bulky carboxylic acids, are dimeric in the solid-state. Compounds 4-6, which are derived from more bulkier aromaric carboxylic acids, exist as monomeric complexes. In the case of 6, where very bulky 2,4,6-triisopropyl benzoic acid is used as the starting material, only one carboxylate ligand binds to the metal, resulting in a cationic complex. Interestingly in all the six complexes, the C-H hydrogen atoms of the 2,2′-bpy ligands are involved in extensive hydrogen bonding with the carboxylate oxygen atoms of the adjacent molecules and hence form non-covalent 1-D or 2-D aggregates in the solid state.     

1,3-Dipolar cycloaddition to the FeSC fragment 20. Preparation and properties of carbonyliron complexes of di-thiooxamide. Reactivity of the mononuclear (di-thiooxamide)Fe(CO)3 towards dimethyl acetylenedicarboxylate

Reaction of Fe₂(CO)₉ at room temperature in THF with the di-thiooxamides (L), SC{N(R,R′)}C{(R,R′)N}S [R=Me, R′-R′=(CH₂)₂ (a); R=H, R′=ⁱPr (b); R=H, R′=iPr (c), R=H, R′=benzyl (d); R=H, R′=H (e)], results for ligands a-d initially in the formation of the mononuclear σ-S, σ-S′ chelate complexes Fe(CO)₃(L) (7a-d), which could be isolated in case of 7a and 7d. Under the reaction conditions, complexes 7a-d react further with [Fe(CO)₄] fragments to give three types of Fe₂(CO)₆(L) complexes (8a-d) in high yields, depending on the di-thiooxamide ligand used together with traces of the known complex S₂Fe₃(CO)₉ (14). The molecular structures of these complexes have been established by the single crystal X-ray diffraction determinations of 8a, 8b and 8d. In the reaction with ligand e the corresponding complex 7e was not detected and the well-known complexes 14 and S₂Fe₃(CO)₉ (15) were isolated in low yield. In situ prepared 7a reacts in a slow reaction with 1 equiv. of dimethyl acetylene dicarboxylate in a 1,3-dipolar cycloaddition reaction to give the stable initial ferra [2.2.1] bicyclic complex 10a in 60% yield. In complex 10a an additional Fe(CO)₄ fragment is coordinated to the sulfido sulfur atom of the cycloadded FeSC fragment. When a toluene solution of 10a is heated to 50 °C it loses two terminal CO ligands to give the binuclear FeFe bonded complex 11a in almost quantitative yield. The molecular structures of 10a and 11a have been confirmed by single crystal X-ray diffraction. Reaction of 7d at room temperature with 2 equiv. of dimethyl acetylene dicarboxylate results in the mononuclear complex 12d in 5% yield. The molecular structure of 12b has been established by single crystal X-ray diffraction and comprises a tetra dentate ligand with two ferra-sulpha cyclobutene, and a ferra-disulpha cyclopentene moiety. When the reaction is performed at 60 °C a low yield of 2,3,4,5-thiophene tetramethyl tertracarboxylate is obtained besides complex 12d.     

Synthesis, characterization and properties of series coordination polymers constructed from a biphenyl dicarboxylate and nitrogen-containing mixed ligands

A series of coordination polymers have been prepared by the combination of flexible ligand 1,1′-biphenyl-2,2′-dicarboxylic acid (H₂dpa) and different types of nitrogen-containing ligands, with various metal ions such as Co(II), Zn(II) and Cd(II). The single-crystal structure analyses reveal that the above complexes possess different structure features with the introduction of different nitrogen-containing ligands. When auxiliary linear ligand 4,4′-bipyridine (4,4′-bpy) is introduced, two-dimensional layered complex, [Co₂(dpa)₂(4,4′-bpy)₂(H₂O)]_n (1) is formed. Whereas if chelating ligand, 1,10-phenanthroline (1,10′-phen) and 2,2′-bipyridine (2,2′-bpy) are introduced, one-dimensional complex [Zn(dpa)(1,10′-phen)]_n (2) and discrete complexes [Co₂(dpa)₂(2,2′-bpy)₂(H₂O)₂] (3), [Co₃(dpa)₃(1,10′-phen)₆(H₂O)₂] (4), [Cd(dpa)(1,10′-phen)₂][(H₂dpa)₂(H₂O)₂] (5) are synthesized. To our interest, 1 and 2 crystallize in homochiral spacegroup. Furthermore, the magnetic property of complex 1 and the fluorescent properties of complexes 2 and 5 are studied.     

Supramolecular assembly driven by hydrogen-bonding and π-π stacking interactions based on copper(II)-terpyridyl complexes

Six 2D and 3D supramolecular complexes [Cu(L1)(O₂CCH₃)₂] · H₂O (1), [Cu₂(L2)₂(μ₂-O₂CCH₃)₂](BF₄)₂ (2), [Cu₂(L1)₂(BDC)(NO₃)₂] · 0.5H₂O (3) [Cu₂(L2)₂(BDC)(NO₃)₂] (4), [Cu₂(L3)₂(BDC)(NO₃)₂] · 0.5H₂O (5) and [Cu₂(L2)₂(BDC)(H₂O)₂](BDC) · 8H₂O (6) (L1 = 4′-(4-pyridyl)-2,2′:6′,2″-terpyridine, L2 = 4′-(2-pyridyl)-2,2′:6′,2″-terpyridine, L3 = 4′-phenyl-2,2′:6′,2″-terpyridine, BDC = 1,4-benzenedicarboxylate), have been prepared and structurally characterized by X-ray diffraction crystallography. In complexes 1, 3, and 4, 1D channels are formed through C-H?O and C-H?N hydrogen-bonding interactions, and further linked into 3D structure via C-H?O and O-H?O interactions. Complex 2 is a 2D layer constructed from intermolecular C-H?F and π-π stacking interactions. In the structure of 6, the BDC²⁻ ions and solvent water molecules form a novel 2D layer containing left- and right-handed helical chains via hydrogen-bonds, and an unusual discrete water octamer is formed within the layer. In 2, 4, 6 and [Ag₂(L2)₂](PF₆)₂ (7) the bonding types of pendent pyridines of L2 depending on the twist about central pyridines are involved in intramolecular (2 and 4), intermolecular (6) or coordination bonds (7) in-twist-order of 5.8°, 3.7°, 28.2° and 38.0°, respectively. Differently, the pendent pyridines of L1 in 1 and 3 form intermolecular hydrogen bonds despite of distinct corresponding twist angles of 25.1° (1) and 42.6°(3). Meanwhile, π-π stacking interactions are present in 1-6 and responsible for the stabilization of these complexes.     

Nitric oxide reduction of copper(II) complex with tetradentate amine ligand followed by ligand transformation

Copper(II) complex 1 with a tetradentate ligand L [L = tris(2-aminoethyl)amine, tren] has been prepared as its perchlorate salt. Single crystal X-ray structure of 1 indicates its trigonal bipyramidal shape in the solid state. The complex, in dry and degassed acetonitrile solvent, was made to react with nitric oxide gas and the copper(II) center has been observed to reduce to Cu(I) with simultaneous nitrosation followed by diazotization at the terminal primary amine positions of the ligand to result into cyclization product, 1-(2-aminoethyl)piperzine, L′ along with tris(2-aminoethyl)ammonium perchlorate, L′′-perchlorate. However, when an acetonitrile:water (10:1, v/v) mixture has been used as the solvent, the reduction of Cu(II) to Cu(I) is observed and the ligand is found to be precipitated out only as L′′-perchlorate. The reduction of Cu(II) to Cu(I) has been studied by UV-visible, ¹H NMR and EPR spectroscopic techniques and by X-ray single crystal structure determination. Both the L′ and L′′-perchlorate have been isolated from the reaction mixture and characterized by using microanalytical studies, various spectroscopic techniques and X-ray single crystal structure determination.