The N-terminal β-sheet of the hyperthermophilic endoglucanase from Pyrococcus horikoshii is critical for thermostability

The β-1,4-endoglucanase (EC 3.2.1.4) from the hyperthermophilic archaeon Pyrococcus horikoshii (EGPh) has strong hydrolyzing activity toward crystalline cellulose. When EGPh is used in combination with β-glucosidase (EC 3.2.1.21), cellulose is completely hydrolyzed to glucose at high temperature, suggesting great potential for EGPh in bioethanol industrial applications. The crystal structure of EGPh shows a triosephosphate isomerase (TIM) (β/α)(8)-barrel fold with an N-terminal antiparallel β-sheet at the opposite side of the active site and a very short C-terminal sequence outside of the barrel structure. We describe here the function of the peripheral sequences outside of the TIM barrel core structure. Sequential deletions were performed from both N and C termini. The activity, thermostability, and pH stability of the expressed mutants were assessed and compared to the wild-type EGPh enzyme. Our results demonstrate that the TIM barrel core is essential for enzyme activity and that the N-terminal β-sheet is critical for enzyme thermostability. Bioinformatics analyses identified potential key residues which may contribute to enzyme hyperthermostability.     

The role of disulfide bond in hyperthermophilic endocellulase

The hyperthermophilic endocellulase, EGPh (glycosyl hydrolase family 5) from Pyrococcus horikoshii possesses 4 cysteine residues forming 2 disulfide bonds, as identified by structural analysis. One of the disulfide bonds is located at the proximal region of the active site in EGPh, which exhibits a distinct pattern from that of the thermophilic endocellulase EGAc (glycosyl hydrolase family 5) of Acidothermus cellulolyticus despite the structural similarity between the two endocellulases. The structural similarity between EGPh and EGAc suggests that EGPh possesses a structure suitable for changing the position of the disulfide bond corresponding to that in EGAc. Introduction of this alternative disulfide bond in EGPh, while removing the original disulfide bond, did not result in a loss of enzymatic activity but the EGPh was no longer hyperthermostable. These results suggest that the contribution of disulfide bond to hyperthermostability at temperature higher than 100 °C is restrictive, and that its impact is dependent on the specific structural environment of the hyperthermophilic proteins. The data suggest that the structural position and environment of the disulfide bond has a greater effect on high-temperature thermostability of the enzyme than on the potential energy of the dihedral angle that contributes to disulfide bond cleavage.     

嗜热真菌纤维素酶的CBD与海栖热袍菌的纤维素酶融合表达

将嗜热真菌毛壳菌纤维素酶Cel7A的纤维素结合结构域编码区与极端嗜热厌氧菌海栖热袍菌的纤维素酶CelB基因进行融合, 构建重组质粒pHsh-CBD-CelB, 并在大肠杆菌中表达。对融合蛋白进行纯化, 通过热处理和离子交换层析, 纯化到的融合蛋白SDS-PAGE 电泳图谱显示为单一条带。对融合蛋白的特性研究, 结果表明融合蛋白降解CMC的最适反应温度为90°C, 结晶纤维素吸附实验表明该融合蛋白具有结合结晶纤维素的能力, 并且融合蛋白降解CMC与结晶纤维素的能力得到提高。     

Analysis of the putative substrate binding region of hyperthermophilic endoglucanase from Pyrococcus horikoshii

A hyperthermophophilic beta-1,4 endoglucanase (family 5, cellulase) was identified in a hyperthermophilic archaeon Pyrococcus horikoshii and found to be capable of hydrolyzing crystalline cellulose at high temperatures. This hyperthermophilic enzyme has promise for applications in biomass utilization, but we have no information regarding the catalytic mechanism or structure of the enzyme. To determine its catalytic mechanism, we examined the roles of amino acids located in a loop near the speculative active site by the alanine scanning method. Ten mutants of the enzyme were constructed and expressed in Escherichia coli. The purified mutant enzymes were assayed for their hydrolytic activities on p-nitrophenyl cellobiose (pNG2), carboxylmethyl cellulose, and avicel. The results showed that His155, Arg156, and Ile162 play an important role in pNG2 binding capacity, and that H155 and I162 are important for catalysis.     

Extracellular enzymatic activity of aquatic and aero-aquatic conidial fungi

Nineteen species of aquatic and areo-aquatic conidial fungi were tested for their ability to produce extracellular enzymes which degrade cellulose, starch, lipids, proteins and tannic acid. The cellulolytic activity was determined by using both solid and liquid media. The activity of other enzymes was examined using solid media. Two-thirds of the species were able to hydrolyze soluble cellulose (CMC) incorporated in solid and liquid media with varying degrees of activity. Extracellular culture filtrates ofAegerita candida, Helicodendron giganteum andH. tubulosum contained a Cl-Cx enzyme complex that could degrade both soluble cellulose (CMC) and crystalline cellulose (filter paper). Lipase activity was demonstrated by 11 species. Fourteen of the species showed activity for amylase and protease, but only 11 of the 16 were capable of degrading tannic acid.     

Characterization of a key trifunctional enzyme for aromatic amino acid biosynthesis in Archaeoglobus fulgidus

In the aromatic amino acid biosynthesis pathway, chorismate presents a branch point intermediate that is converted to tryptophan, phenylalanine (Phe), and tyrosine (Tyr). In bacteria, three enzymes catalyze the conversion of chorismate to hydroxyphenylpyruvate or pyruvate. The enzymes, chorismate mutase (CM), prephenate dehydratase (PDT), and prephenate dehydrogenase (PDHG) are either present as distinct proteins or fusions combining two activities. Gene locus AF0227 of Archaeoglobus fulgidus is predicted to encode a fusion protein, AroQ, containing all three enzymatic domains. This work describes the first characterization of a trifunctional AroQ. The A. fulgidus aroQ gene was cloned and overexpressed in Escherichia coli. The recombinant protein purified as a homohexamer with specific activities of 10, 0.51, and 50 U/mg for CM, PDT, and PDHG, respectively. Tyr at 0.5 mM concentration inhibited PDHG activity by 50%, while at 1 mM PDT was activated by 70%. Phe at 5 μM inhibited PDT activity by 66% without affecting the activity of PDHG. A fusion of CM, PDT, and PDHG domains is evident in the genome of only one other organism sequenced to date, that of the hyperthermophilic archaeon, Nanoarchaeum equitans. Such fusions of contiguous activities in a biosynthetic pathway may constitute a primitive strategy for the efficient processing of labile metabolites.     

Analysis of the Hyperthermophilic Chitinase from Pyrococcus furiosus: Activity toward Crystalline Chitin

Chitinase [EC 3.2.1.14] is an enzyme that can hydrolyze the β-1,4 linkage between N-acetyl-D-glucosamine in chitin. In the genome database of the hyperthermophilic archaeon Pyrococcus furiosus, we found two adjacent genes (PF1233 and PF1234) homologous to those of the chitinase of Thermococcus kodakaraensis. In the cultured medium of P. furiosus, however, no chitinase activity was detected. On analysis of the structural gene of P. furiosus, it appears that one nucleotide insertion in PF1234 caused a frame shift and separated a gene. By deletion of one nucleotide in PF1234, the best match was achieved between chitinases of T. kodakaraenesis and P. furiosus. We succeeded in constructing an artificial recombinant chitinase exhibiting hydrolytic activity toward not only colloidal but also crystalline chitins at high temperature. Furthermore, by analyzing the characteristics of the domains, a recombinant enzyme comprising two domains exhibiting high activity toward crystalline chitin was prepared.     

Expression of foreign proteins in<Emphasis Type="Italic"> Escherichia coli</Emphasis> by fusing with an archaeal FK506 binding protein

Improper protein-folding often results in inclusion-body formation in a protein expression system using Escherichia coli. To express such proteins in the soluble fraction of E. coli cytoplasm, we developed an expression system by fusing the target protein with an archaeal FK506 binding protein (FKBP). It has been reported that an archaeal FKBP from a hyperthermophilic archaeon, Thermococcus sp. KS-1 (TcFKBP18), possesses not only peptidyl–prolyl cis–trans isomerase activity, but also chaperone-like activity to enhance the refolding yield of an unfolded protein by suppressing irreversible protein aggregation. To study the effect of this fusion strategy with FKBP on the expression of foreign protein in E. coli, a putative rhodanese (thiosulfate sulfurtransferase) from a hyperthermophilic archaeon and two mouse antibody fragments were used as model target proteins. When they were expressed alone in E. coli, they formed insoluble aggregates. Their genes were designed to be expressed as a fusion protein by connecting them to the C-terminal end of TcFKBP18 with an oligopeptide containing a thrombin cleavage site. By fusing TcFKBP18, the expression of the target protein in the soluble fraction was significantly increased. The percentage of the soluble form in the expressed protein reached 10–28% of the host soluble proteins. After purification and protease digestion of the expressed antibody fragment–TcFKBP18 fusion protein, the cleaved antibody fragment (single-chain Fv) showed specific binding to the antigen in ELISA. This indicated that the expressed antibody fragment properly folded to the active form.     

Site-directed mutation of noncatalytic residues of Thermobifida fusca exocellulase Cel6B.

Fifteen mutant genes in six loop residues and eight mutant genes in five conserved noncatalytic active site residues of Thermobifida fusca Cel6B were constructed, cloned and expressed in Escherichia coli or Streptomyces lividans. The mutant enzymes were assayed for catalytic activity on carboxymethyl cellulose (CMC), swollen cellulose (SC), filter paper (FP), and bacterial microcrystalline cellulose (BMCC) as well as cellotetraose, cellopentaose, and 2, 4-dinitrophenyl-beta-D-cellobioside. They were also assayed for ligand binding, enzyme processivity, thermostability, and cellobiose feedback inhibition. Two double Cys mutations that formed disulfide bonds across two tunnel forming loops were found to significantly weaken binding to ligands, lower all activities, and processivity, demonstrating that the movement of these loops is important but not essential for Cel6B function. Two single mutant enzymes, G234S and G284P, had higher activity on SC and FP, and the double mutant enzyme had threefold and twofold higher activity on these substrates, respectively. However, synergism with endocellulase T. fusca Cel5A was not increased with these mutant enzymes. All mutant enzymes with lower activity on filter paper, BMCC, and SC had lower processivity. This trend was not true for CMC, suggesting that processivity in Cel6B is a key factor in the hydrolysis of insoluble and crystalline cellulose. Three mutations (E495D, H326A and W329C) located near putative glycosyl substrate subsites -2, +1 and +2, were found to significantly increase resistance to cellobiose feedback inhibition. Both the A229V and L230C mutations specifically decreased activity on BMCC, suggesting that BMCC hydrolysis has a different rate limiting step than the other substrates. Most of the mutant enzymes had reduced thermostability although Cel6B G234S maintained wild-type thermostability. The properties of the different mutant enzymes provide insight into the catalytic mechanism of Cel6B.     

The noncellulosomal family 48 cellobiohydrolase from Clostridium phytofermentans ISDg: heterologous expression, characterization, and processivity

Family 48 glycoside hydrolases (cellobiohydrolases) are among the most important cellulase components for crystalline cellulose hydrolysis mediated by cellulolytic bacteria. Open reading frame (Cphy_3368) of Clostridium phytofermentans ISDg encodes a putative family 48 glycoside hydrolase (CpCel48) with a family 3 cellulose-binding module. CpCel48 was successfully expressed as two soluble intracellular forms with or without a C-terminal His-tag in Escherichia coli and as a secretory active form in Bacillus subtilis. It was found that calcium ion enhanced activity and thermostability of the enzyme. CpCel48 had high activities of 15.1 U μmol⁻¹ on Avicel and 35.9 U μmol⁻¹ on regenerated amorphous cellulose (RAC) with cellobiose as a main product and cellotriose and cellotetraose as by-products. By contrast, it had very weak activities on soluble cellulose derivatives (e.g., carboxymethyl cellulose (CMC)) and did not significantly decrease the viscosity of the CMC solution. Cellotetraose was the smallest oligosaccharide substrate for CpCel48. Since processivity is a key characteristic for cellobiohydrolases, the new initial false/right attack model was developed for estimation of processivity by considering the enzyme's substrate specificity, the crystalline structure of homologous Cel48 enzymes, and the configuration of cellulose chains. The processivities of CpCel48 on Avicel and RAC were estimated to be ∼3.5 and 6.0, respectively. Heterologous expression of secretory active cellobiohydrolase in B. subtilis is an important step for developing recombinant cellulolytic B. subtilis strains for low-cost production of advanced biofuels from cellulosic materials in a single step.     

Properties of cellulosomal family 9 cellulases from Clostridium cellulovorans

The cellulosomal family 9 cellulase genes engH, engK, engL, engM, and engY of Clostridium cellulovorans have been cloned and sequenced. We compared the enzyme activity of family 9 cellulosomal cellulases from C. cellulovorans and their derivatives. EngH has the highest activity toward soluble cellulose derivatives such as carboxymethylcellulose (CMC) as well as insoluble cellulose such as acid-swollen cellulose (ASC). EngK has high activity toward insoluble cellulose such as ASC and Avicel. The results of thin-layer chromatography showed that the cleavage products of family 9 cellulases were varied. These results indicated that family 9 endoglucanases possess different modes of attacking substrates and produce varied products. To investigate the functions of the carbohydrate-binding module (CBM) and the catalytic module, truncated derivatives of EngK, EngH, and EngY were constructed and characterized. EngHΔCBM and EngYΔCBM devoid of the CBM lost activity toward all substrates including CMC. EngKΔCBM and EngMΔCBM did not lose activity toward CMC but lost activity toward Avicel. These observations suggest that the CBM is extremely important not only because it mediates the binding of the enzyme to the substrates but also because it participates in the catalytic function of the enzyme or contributes to maintaining the correct tertiary structure of the family 9 catalytic module for expressing enzyme activity.     

Processivity, Substrate Binding, and Mechanism of Cellulose Hydrolysis by Thermobifida fusca Cel9A

Thermobifida fusca Cel9A-90 is a processive endoglucanase consisting of a family 9 catalytic domain (CD), a family 3c cellulose binding module (CBM3c), a fibronectin III-like domain, and a family 2 CBM. This enzyme has the highest activity of any individual T. fusca enzyme on crystalline substrates, particularly bacterial cellulose (BC). Mutations were introduced into the CD or the CBM3c of Cel9A-68 using site-directed mutagenesis. The mutant enzymes were expressed in Escherichia coli; purified; and tested for activity on four substrates, ligand binding, and processivity. The results show that H125 and Y206 play an important role in activity by forming a hydrogen bonding network with the catalytic base, D58; another important supporting residue, D55; and Glc(−1) O1. R378, a residue interacting with Glc(+1), plays an important role in processivity. Several enzymes with mutations in the subsites Glc(−2) to Glc(−4) had less than 15% activity on BC and markedly reduced processivity. Mutant enzymes with severalfold-higher activity on carboxymethyl cellulose (CMC) were found in the subsites from Glc(−2) to Glc(−4). The CBM3c mutant enzymes, Y520A, R557A/E559A, and R563A, had decreased activity on BC but had wild-type or improved processivity. Mutation of D513, a conserved residue at the end of the CBM, increased activity on crystalline cellulose. Previous work showed that deletion of the CBM3c abolished crystalline activity and processivity. This study shows that it is residues in the catalytic cleft that control processivity while the CBM3c is important for loose binding of the enzyme to the crystalline cellulose substrate.     

Reconsideration of an early dogma,saying “there is no evidence for disulfide bonds in proteins from archaea”

Stability and function of a large number of proteins are crucially dependent on the presence of disulfide bonds. Recent genome analysis has pointed out an important role of disulfide bonds for the structural stabilization of intracellular proteins from hyperthermophilic archaea and bacteria. These findings contradict the conventional view that disulfide bonds are rare in those proteins. A specific protein, known as protein disulfide oxidoreductase (PDO) is recognized as a potential key enzyme in intracellular disulfide-shuffling in hyperthermophiles. The structure of this protein consists of two combined thioredoxin-related units which together, in tandem-like manner, form a closed protein domain. Each of these units contains a distinct CXXC active site motif. Both sites seem to have different redox properties. A relation to eukaryotic protein disulfide isomerase is suggested by the observed structural and functional characteristics of the protein. Enzymological studies have revealed that both, the archaeal and bacterial forms of this protein show oxidative and reductive activity and are able to isomerize protein disulfides. The variety of active site disulfides found in PDO’s from hyperthermophiles is puzzling. It is assumed, that PDO enzymes in hyperthermophilic archaea and bacteria may be part of a complex system involved in the maintenance of protein disulfide bonds.     

Processivity, substrate binding, and mechanism of cellulose hydrolysis by Thermobifida fusca Cel9A

Thermobifida fusca Cel9A-90 is a processive endoglucanase consisting of a family 9 catalytic domain (CD), a family 3c cellulose binding module (CBM3c), a fibronectin III-like domain, and a family 2 CBM. This enzyme has the highest activity of any individual T. fusca enzyme on crystalline substrates, particularly bacterial cellulose (BC). Mutations were introduced into the CD or the CBM3c of Cel9A-68 using site-directed mutagenesis. The mutant enzymes were expressed in Escherichia coli; purified; and tested for activity on four substrates, ligand binding, and processivity. The results show that H125 and Y206 play an important role in activity by forming a hydrogen bonding network with the catalytic base, D58; another important supporting residue, D55; and Glc(-1) O1. R378, a residue interacting with Glc(+1), plays an important role in processivity. Several enzymes with mutations in the subsites Glc(-2) to Glc(-4) had less than 15% activity on BC and markedly reduced processivity. Mutant enzymes with severalfold-higher activity on carboxymethyl cellulose (CMC) were found in the subsites from Glc(-2) to Glc(-4). The CBM3c mutant enzymes, Y520A, R557A/E559A, and R563A, had decreased activity on BC but had wild-type or improved processivity. Mutation of D513, a conserved residue at the end of the CBM, increased activity on crystalline cellulose. Previous work showed that deletion of the CBM3c abolished crystalline activity and processivity. This study shows that it is residues in the catalytic cleft that control processivity while the CBM3c is important for loose binding of the enzyme to the crystalline cellulose substrate.     

A GH57 Family Amylopullulanase from Deep-Sea <Emphasis Type="Italic">Thermococcus siculi</Emphasis>: Expression of the Gene and Characterization of the Recombinant Enzyme

The gene encoding a new extracellular amylopullulanase (type II pullulanase) was cloned from an extremely thermophilic anaerobic archaeon Thermococcus siculi strain HJ21 isolated previously from a deep-sea hydrothermal vent. The functional hydrolytic domain of the amylopullulanase (TsiApuN) and its MalE fusion protein (MTsiApuN) were expressed heterologously. The complete amylopullulanase (TsiApu) was also purified from fermentation broth of the strain. The pullulanase and amylase activities of the three enzymes were characterized. TsiApu had optimum temperature of 95°C for the both activities, while MTsiApuN and TsiApuN had a higher optimum temperature of 100°C. The residual total activities of MTsiApuN and TsiApuN were both 89% after incubation at 100°C for 1 h, while that of TsiApu was 70%. For all the three enzymes the optimum pHs for amylase and pullulanase activities were 5.0 and 6.0, respectively. By analyzing enzymatic properties of the three enzymes, this study suggests that the carboxy terminal region of TsiApu might interfere with the thermoactivity. The acidic thermoactive amylopullulanases MTsiApuN and TsiApuN could be further employed for industrial saccharification of starch.     

Growth of Cellulomonas sp. ATCC 21399 on different polysaccharides as sole carbon source Induction of extracellular enzymes

Summary Growth and extracellular enzyme production of Cellulomonas sp. ATCC 21399 on carboxymethylcellulose (CMC), microcrystalline cellulose (Avicel), xylan, galactomannan and starch were compared. The bacteria grew poorly on CMC, whereas high cell densities were obtained on the other substrates. Growth on Avicel resulted in extracellular enzyme activities against CMC, Avicel, xylan, galactomannan and amylose. By contrast, growth on xylan, galactomannan and starch induced only the enzymes neccessary for the degradation of the growth substrate. Extracellular proteinase activity could be measured during growth on all substrates but CMC, and the possibility of proteolytic inactivation of some of the unstable enzymes (i.e. Avicelase and amylase) in discussed.     

Fusion of cellulose binding domain from Trichoderma reesei CBHI to Cryptococcus sp. S-2 cellulase enhances its binding affinity and its cellulolytic activity to insoluble cellulosic substrates

Cryptococcus sp. S-2 carboxymethyl cellulase (CSCMCase) is active in the acidic pH and lacks a binding domain. The absence of the binding domain makes the enzyme inefficient against insoluble cellulosic substrates. To enhance its binding affinity and its cellulolytic activity to insoluble cellulosic substrates, cellulose binding domain (CBD) of cellobiohydrolase I (CBHI) from Trichoderma reesei belonging to carbohydrate binding module (CBM) family 1 was fused at the C-terminus of CSCMCase. The constructed fusion enzymes (CSCMCase-CBD and CSCMCase-2CBD) were expressed in a newly recombinant expression system of Cryptococcus sp. S-2, purified to homogeneity, and then subject to detailed characterization. The recombinant fusion enzymes displayed optimal pH similar to those of the native enzyme. Compared with rCSCMCase, the recombinant fusion enzymes had acquired an increased binding affinity to insoluble cellulose and the cellulolytic activity toward insoluble cellulosic substrates (SIGMACELL^® and Avicel) was higher than that of native enzyme, confirming the presence of CBDs improve the binding and the cellulolytic activity of CSCMCase on insoluble substrates. This attribute should make CSCMCase an attractive applicant for various application.     

Characterization of a multi-function processive endoglucanase CHU_2103 from Cytophaga hutchinsonii

Cytophaga hutchinsonii is a Gram-negative gliding bacterium which can efficiently degrade crystalline cellulose by an unknown strategy. Genomic analysis suggests the C. hutchinsonii genome lacks homologs to an obvious exoglucanase that previously seemed essential for cellulose degradation. One of the putative endoglucanases, CHU_2103, was successfully expressed in Escherichia coli JM109 and identified as a processive endoglucanase with transglycosylation activity. It could hydrolyze carboxymethyl cellulose (CMC) into cellodextrins and rapidly decrease the viscosity of CMC. When regenerated amorphous cellulose (RAC) was degraded by CHU_2103, the ratio of the soluble to insoluble reducing sugars was 3.72 after 3 h with cellobiose and cellotriose as the main products, indicating that CHU_2103 was a processive endoglucanase. CHU_2103 could degrade cellodextrins of degree of polymerization ≥3. It hydrolyzed p-nitrophenyl β-d-cellodextrins by cutting glucose or cellobiose from the non-reducing end. Meanwhile, some larger-molecular-weight cellodextrins could be detected, indicating it also had transglycosylation activity. Without carbohydrate-binding module (CBM), CHU_2103 could bind to crystalline cellulose and acted processively on it. Site-directed mutation of CHU_2103 demonstrated that the conserved aromatic amino acid W197 in the catalytic domain was essential not only for its processive activity, but also its cellulose binding ability.     

An Endoglucanase, EglA, from the Hyperthermophilic Archaeon Pyrococcus furiosus Hydrolyzes β-1,4 Bonds in Mixed-Linkage (1→3),(1→4)-β-d-Glucans and Cellulose

The eglA gene, encoding a thermostable endoglucanase from the hyperthermophilic archaeon Pyrococcus furiosus, was cloned and expressed in Escherichia coli. The nucleotide sequence of the gene predicts a 319-amino-acid protein with a calculated molecular mass of 35.9 kDa. The endoglucanase has a 19-amino-acid signal peptide but not cellulose-binding domain. The P. furiosus endoglucanase has significant amino acid sequence similarities, including the conserved catalytic nucleophile and proton donor, with endoglucanases from glucosyl hydrolase family 12. The purified recombinant enzyme hydrolyzed β-1,4 but not β-1,3 glucosidic linkages and had the highest specific activity on cellopentaose (degree of polymerization [DP] = 5) and cellohexaose (DP = 6) oligosaccharides. To a lesser extent, EglA also hydrolyzed shorter cellodextrins (DP < 5) as well as the amorphous portions of polysaccharides which contain only β-1,4 bonds such as carboxymethyl cellulose, microcrystalline cellulose, Whatman paper, and cotton linter. The highest specific activity toward polysaccharides occurred with mixed-linkage β-glucans such as barley β-glucan and lichenan. Kinetics studies with cellooliogsaccharides and p-nitrophenyl-cellooligosaccharides indicated that the enzyme had three glucose binding subsites (−I, −II, and −III) for the nonreducing end and two glucose binding subsites (+I and +II) for the reducing end from the scissile glycosidic linkage. The enzyme had temperature and pH optima of 100°C and 6.0, respectively; a half-life of 40 h at 95°C; and a denaturing temperature of 112°C as determined by differential scanning calorimetry. The discovery of a thermostable enzyme with this substrate specificity has implications for both the evolution of enzymes involved in polysaccharide hydrolysis and the occurrence of growth substrates in hydrothermal vent environments.