Continuous production of fructooligosaccharides using fructosyltransferase immobilized on ion exchange resin

A continuous production of fructooligosaccharides from sucrose was investigated by fructosyltransferase immobilized on a high porous resin, Diaion HPA 25. The optimum pH (5.5) and temperature (55°C) of the enzyme for activity was unaltered by immobilization, and the immobilized enzyme became less sensitive to the pH change. The optimal operation conditions of the immobilized enzyme column for maximizing the productivity were as follows: 600 g/L of sucrose feed concentration, flow rate of superficial space velocity 2.7 h^?1. When the enzyme column was run at 50°C, about 8% loss of the initial activity of immobilized enzyme was observed after 30 days of continuous operation, during which high productivity of 1174 g/L·h was achieved. The kinds of products obtained using the immobilized enzyme were almost the same as those using soluble enzymes or free cells.     

Cell growth and alpha-amylase production characteristics of Bacillus amyloliquefaciens

Growth and alpha-amylase production characteristics of Bacillus amyloliquefaciens strain F (ATCC 23350) in batch cultures are examined using glucose or maltose as the carbon source. While the cell growth is rapid when glucose is used as the carbon source, higher cell mass, higher total and specific enzyme activities, and higher enzyme production rates are obtained when maltose is used as the carbon source. The overall specific enzyme activity decreases with an increase in the initial concentration of carbon source. The oxygen requirement and carbon dioxide generation vary linearly with the maximum amount of cell mass produced. For experiments conducted using glucose as the carbon source, the kinetics of cell growth and glucose consumption are described using a special form of the Vavilin equation. For a given amount of initial carbon source, the enzyme synthesis capability is retained by the microorganism, although at a substantially reduced level, under severe oxygen limitation.     

Fed-batch fermentation for the production of alpha-amylase by Bacillus amyloliquefaciens

Fed-batch cultures were performed to maximize the alpha-amylase activity in a bioreactor. Kinetic equations containing a catabolite repression effect were used to model the enzyme formation from Bacillus amyloliquefaciens. Fed-batch culture experiments were performed using maltose to implement the optimal feeding strategy. Optimal fed-batch culture based on sequential parameter estimation was performed successfully using off-line analysis while the fermentation was in progress. The enzyme activity from the fed-batch culture employing maltose was higher than that of the batch culture by 60%. Enzyme production using starch showed similar trends to those obtained using maltose.     

Kinetics of alpha-amylase synthesis from Bacillus amyloliquefaciens

The microbial production of alpha-amylase from Bacillus amyloliquefaciens was investigated. The microorganism was grown using media containing glucose or maltose at 37 degrees C and under aerobic conditions in a 16-L fermentor. The alpha-amylase synthesis from maltose was not found to be inducible but was found to be subject to catabolite repression. The maltose uptake rate was observed to be the rate-limiting step compared to the conversion rate of maltose to glucose by intracellular alpha-glucosidase. The alpha-amylase activity achieved with maltose as a substrate was higher than that achieved with glucose. A slower growth rate and a higher cell density were obtained with maltose. The enzyme production pattern depended upon the nutrient composition of the medium.     

Increased production of alpha-amylase by Bacillus amyloliquefaciens in the presence of glycine

The production of alpha-amylase by Bacillus amyloliquefaciens increased by a factor of 300 when glycine was added to a chemically defined simple medium at the early-logarithmic phase of growth. Glycine was not metabolized to a significant extent under the conditions used, but it considerably prevented the lowering of the pH of the culture.     

Increased production of alpha-amylase by Bacillus amyloliquefaciens in the presence of glycine.

The production of alpha-amylase by Bacillus amyloliquefaciens increased by a factor of 300 when glycine was added to a chemically defined simple medium at the early-logarithmic phase of growth. Glycine was not metabolized to a significant extent under the conditions used, but it considerably prevented the lowering of the pH of the culture.     

Two-codon mutagenesis of alpha-amylase gene of Bacillus amyloliquefaciens

The oligonucleotide encoding Bam HI recognition site having the structure pCGGGATC had been inserted into the recognition sites MspI of the B. amyloliquefaciens alpha-amylase gene, which was cloned in pTG29B plasmid. The alpha-amylase gene had no BamHI sites before mutagenesis. The set of pNSBamHI plasmids with BamHI site at four different positions was obtained. It was shown that all the mutant alpha-amylases possess different specific activities. One of the mutant proteins possesses reduced thermostability. The mutant alpha-amylases can be used for further experiments on protein-engineering of liquefying-type alpha-amylases.     

Thermostabilization of Bacillus amyloliquefaciens alpha-amylase by chemical cross-linking

Chemical cross-linking of a mesophilic alpha-amylase from Bacillus amyloliquefaciens (BAA) was carried out. Intra-molecular cross-links between lysine residues upon treatment of the enzyme with ethylene glycol bis(succinic acid N-hydroxy succinimide ester) resulted in enhancement of thermostability as indicated by irreversible thermoinactivation experiments. Enhancement of thermostability coincided with a dramatic protection against aggregation, combined with a decrease in surface hydrophobicity. Deamidation, another important mechanism of irreversible thermoinactivation, was also diminished upon modification. While no significant changes in the kinetic parameters are evident, rigidification of the protein structure is suggested by circular dichroism (CD) and fluorescence studies.     

Simple structured model for alpha-amylase synthesis by Bacillus amyloliquefaciens

A predictive, simple, structured model describing the synthesis of alpha-amylase by Bacillus amyloliquefaciens was formulated. Three key intracellular processes were identified (i.e, translation, and excretion) along with two key intracellular components (i.e., mRNA and the intracellular form of the alpha-amylase enzyme). Nearly all the model parameters were estimated by means of performing independent experiments, primarily fed-batch experiments. The model was shown to predict transient system behavior in batch and in fed-batch operation with some limitation and minor model parameter revisions. Since a principal objective was to demonstrate that independent experimental parameter determination can be used to construct the predictive model, further fine-tuning of the parameters may be necessary before application for optimization and control purposes.     

Sequence of the N-terminal half of Bacillus amyloliquefaciens alpha-amylase.

Bacillus amyloliquefaciens alpha-amylase (1,4-alpha-D-glucan glucanohydrolase. EC 3.2.1.1), which is commercially supplied as 'Bacillus subtilis alpha-amylase' does not cross-react immunologically with B. subtilis alpha-amylase. This enzyme (from B. amyloliquefaciens) was cleaved by treatment with CNBr into seven fragments. Peptide A was selected for sequence determination. It is the longest one, containing 185 amino acids (i.e. approx. 50% of the total molecule) and connects to the hexapeptide of the N-terminus. Its primary structure was aligned by use of various proteolytic enzymes. The sequence of amino acids 181-184 is identical with that of amino acids 14-17 of the alpha-amylase isolated from B. subtilis (except that amino acid 183 is asparagine rather than aspartic acid).     

Cloning the alpha-amylase gene of Bacillus amyloliquefaciens in cyanobacteria cells

The recombinant plasmids of pIAH4amy series were constructed containing the alpha-amylase gene of Bacillus amyloliquefaciens A50 with its own promoter and leading sequence within an integrative vector plasmid pIAH4 (CmR) for cyanobacterium Anacystis nidulans R2. At Anacystis nidulans transformation the hybrid plasmids integrate into cyanobacterium chromosome with high efficiency and all CmR transformants produce alpha-amylase. Expression of bacillar alpha-amylase gene in cyanobacterium cells is independent of the cloned gene orientation in the vector plasmid. Secretion of alpha-amylase into the cyanobacterial periplasm has been demonstrated.     

Thermostable alpha-amylase production by an extreme thermophile Bacillus thermooleovorans

AIMS: alpha-Amylase production by a newly isolated thermophile, Bacillus thermooleovorans, was studied under different cultivation conditions. METHODS AND RESULTS: The influence of various carbon and nitrogen sources on alpha-amylase production was quantified in batch fermentation in shake flasks. Starch and tryptone were observed to be the ideal carbon and nitrogen sources, respectively. Cultivation of the organism in a chemically defined medium consisting of glucose, riboflavin, cysteine, MgSO4, K2HPO4 and NaCl led to a near twofold increase in the production of alpha-amylase in comparison with that in the complex medium. The increase in enzyme production was achieved using vitamins and amino acids. When the organism was grown in a laboratory fermenter in the optimized complex medium, the noticeable effects were the near abolition of the lag phase, a 2.2-fold increase in enzyme production and a reduction in optimal production time from 12 to 4-5 h. CONCLUSION: Enhancement of amylase production was achieved under various cultivation conditions. SIGNIFICANCE AND IMPACT OF THE STUDY: Bacillus thermooleovorans produces a calcium-independent and thermostable amylase which can find use in starch saccharification.     

Export of alpha-amylase by Bacillus amyloliquefaciens requires proton motive force.

The secretion of protein directly into the extracellular medium by Bacillus amyloliquefaciens, a gram-positive bacterium, was shown to be dependent on proton motive force. When the electrochemical membrane potential gradient of protons was dissipated either by uncouplers or by valinomycin in combination with K+, a precursor form of alpha-amylase accumulated on the cellular membrane. The proton motive force could be dissipated without altering the intracellular level of ATP, indicating that the observed inhibition of export was not the result of decreased ATP concentration.     

An active center tryptophan residue in liquefying alpha-amylase from Bacillus amyloliquefaciens

Liquefying alpha-amylase from Bacillus amyloliquefaciens was inactivated on treatment with N-bromosuccinamide. Preincubation of the enzyme with either of the substrate, or competitive inhibitor provided significant protection against inactivation. The relationship between activity loss and the number of tryptophan residues modified, as well as presence of substrate/inhibitor in the reaction mixture, demonstrated that only one of three modifiable tryptophan residues is at or near the active center. The apparent Km of the modified enzyme for soluble starch increased manifold, thus implicating the sensitive tryptophan residue in the substrate binding region of the enzyme.