Biocidal activity of formaldehyde and nonformaldehyde biocides toward Mycobacterium immunogenum and Pseudomonas fluorescens in pure and mixed suspensions in synthetic metalworking fluid and saline

The microbicidal activity of four different biocides was studied in synthetic metalworking fluid (MWF) against Mycobacterium immunogenum, a suspected causative agent for hypersensitivity pneumonitis, and Pseudomonas fluorescens, a representative for the predominant gram-negative bacterial contaminants of MWF. The results indicated that M. immunogenum is more resistant than P. fluorescens to the tested formaldehyde-releasing biocides (Grotan and Bioban), isothiazolone (Kathon), and phenolic biocide (Preventol). Kathon was effective against mycobacteria at lower concentrations than the other three test biocides in MWF. In general, there was a marked increase in biocidal resistance of both the test organisms when present in MWF matrix compared to saline. Increased resistance of the two test organisms to biocides was observed when they were in a mixed suspension (1:1 ratio). The results indicate the protective effect of the MWF matrix against the action of commonly used biocides on the MWF-colonizing microbial species of occupational health significance, including mycobacteria.     

Biocidal Activity of Formaldehyde and Nonformaldehyde Biocides toward Mycobacterium immunogenum and Pseudomonas fluorescens in Pure and Mixed Suspensions in Synthetic Metalworking Fluid and Saline

The microbicidal activity of four different biocides was studied in synthetic metalworking fluid (MWF) against Mycobacterium immunogenum, a suspected causative agent for hypersensitivity pneumonitis, and Pseudomonas fluorescens, a representative for the predominant gram-negative bacterial contaminants of MWF. The results indicated that M. immunogenum is more resistant than P. fluorescens to the tested formaldehyde-releasing biocides (Grotan and Bioban), isothiazolone (Kathon), and phenolic biocide (Preventol). Kathon was effective against mycobacteria at lower concentrations than the other three test biocides in MWF. In general, there was a marked increase in biocidal resistance of both the test organisms when present in MWF matrix compared to saline. Increased resistance of the two test organisms to biocides was observed when they were in a mixed suspension (1:1 ratio). The results indicate the protective effect of the MWF matrix against the action of commonly used biocides on the MWF-colonizing microbial species of occupational health significance, including mycobacteria.     

Importance of porins for biocide efficacy against Mycobacterium smegmatis

Mycobacteria are among the microorganisms least susceptible to biocides but cause devastating diseases, such as tuberculosis, and increasingly opportunistic infections. The exceptional resistance of mycobacteria to toxic solutes is due to an unusual outer membrane, which acts as an efficient permeability barrier, in synergy with other resistance mechanisms. Porins are channel-forming proteins in the outer membrane of mycobacteria. In this study we used the alamarBlue assay to show that the deletion of Msp porins in isogenic mutants increased the resistance of Mycobacterium smegmatis to isothiazolinones (methylchloroisothiazolinone [MCI]/methylisothiazolinone [MI] and octylisothiazolinone [2-n-octyl-4-isothiazolin-3-one; OIT]), formaldehyde-releasing biocides {hexahydrotriazine [1,3,5-tris (2-hydroxyethyl)-hexahydrotriazine; HHT] and methylenbisoxazolidine [N,N'-methylene-bis-5-(methyloxazolidine); MBO]}, and the lipophilic biocides polyhexamethylene biguanide and octenidine dihydrochloride 2- to 16-fold. Furthermore, the susceptibility of the porin triple mutant against a complex disinfectant was decreased 8-fold compared to wild-type (wt) M. smegmatis. Efficacy testing in the quantitative suspension test EN 14348 revealed 100-fold improved survival of the porin mutant in the presence of this biocide. These findings underline the importance of porins for the susceptibility of M. smegmatis to biocides.     

Efficacy of individual biocides and synergistic combinations

A method for quantitative estimation of the biocidal effect of compounds on microbial cells has been developed based on colony growth on solid nutrient media. The method allows for specifying a mode of action and for calculating the most effective ratio of biocides in synergistic blends. The test organism Serratia marcescens was grown in the presence of copper sulfate and kathon (2-N-octyl-4-isothiazolin-3-one) on agar medium supplemented with glucose and peptone. The approach made it possible to achieve respectively 96 and 67% decreases in effective concentrations of kathon and copper sulfate in the mixture.     

Quantitative Assessment of the Biocidal Activity of Chemicals Using Soil Microbial Associations

Quantitative assessment, using three Pseudomonas sp. strains, of the activity of the microbial biocide Soncid 8101 demonstrated that the values of effective sublethal concentrations (L₅₀) differed by 500% (because of individual variations in the sensitivity of the test strains). The spread of parameters of biocidal activity could be narrowed by using a mixture of microorganisms with high, medium, and weak resistance. A method for quantitative assessment of the activity of microbial biocides was proposed based on the use of natural associations of soil bacteria.     

Biofilm Formation and Biocide Susceptibility Testing of Mycobacterium fortuitum and Mycobacterium marinum

The ability of non-tuberculous mycobacteria to form biofilms may allow for their increased resistance to currently used biocides in medical and industrial settings. This study examines the biofilm growth of Mycobacterium fortuitum and Mycobacterium marinum, using the MBEC™ assay system, and compares the susceptibility of planktonic and biofilm cells to commercially available biocides. With scanning electron microscopy, both M. fortuitum and M. marinum form biofilms that are morphologically distinct. Biocide susceptibility testing suggested that M. fortuitum biofilms displayed increased resistance over their planktonic state. This is contrasted with M. marinum biofilms, which were generally as or more susceptible over their planktonic state. Received: 15 February 2002 / Accepted: 28 March 2002     

Isolation of novel mycobacteria contaminating an aquarium fish tank in a Japanese university hospital

Aims: To better understand nontuberculous mycobacteria (NTM) contamination in a hospital setting, six freshwater fish gut homogenates and water in an aquarium fish tank placed on the reception counter of a nursing station were cultured for mycobacteria. Methods and Results: By direct sequencing of 16s rRNA, rpoB and hsp65, scotochromogenic and nonchromogenic Mycobacterium szulgai isolates containing hsp65 type II (GenBank accession nos. FJ384762 and FJ384764 , respectively), Mycobacterium gordonae isolates containing rpoB clusters B and E (GenBank accession no. FJ384766 ), and Mycobacterium kansasii isolates containing hsp65 type VI were collected from the gut homogenates and water from the fish tank. However, no isolates were obtained from the tap water used to refill the fish tank. A randomly amplified polymorphic DNA (RAPD) analysis using a 10‐mer primer (5′‐TGGTCGCGGC) showed that some NTM from the fish tank water were identical to those obtained from the gut homogenates. Conclusions: Fish and water in the tank were contaminated by the novel NTM. Significance and Impact of the Study: These findings could help to elucidate infection routes and contamination sources of novel NTM from water sources.     

Surviving within the amoebal exocyst: the <Emphasis Type="Italic">Mycobacterium avium</Emphasis> complex paradigm

Background  

Most of environmental mycobacteria have been previously demonstrated to resist free-living amoeba with subsequent increased virulence and resistance to antibiotics and biocides. The Mycobacterium avium complex (MAC) comprises of environmental organisms that inhabit a wide variety of ecological niches and exhibit a significant degree of genetic variability. We herein studied the intra-ameobal location of all members of the MAC as model organisms for environmental mycobacteria.     

Quinones as antimycobacterial agents

Mycobacterium tuberculosis is a serious worldwide health threat, killing almost 3 million people per year. Other mycobacterial species, especially Mycobacterium avium, are emerging pathogens in the immunocompromised population, most notably AIDS patients. These nontuberculous mycobacteria (NTM) are ubiquitous in the environment, and naturally resistant to many disinfection procedures. Treatment options are limited, and no new antibiotics have been developed against mycobacteria since the 1970s. There is a desperate need for new biocides and antibiotics to prevent and treat mycobacterial infections. A small aromatic compound library has been screened for effectiveness in growth inhibition or killing of mycobacteria. Four species, representing the M. tuberculosis complex, the slow-growing NTM, and the rapid-growing NTM were used. Active compounds had minimal inhibitory concentrations as low as 12.5 microg/mL, with the active component being a quinone. The primarily bactericidal activity observed represents a unique mechanism of action. A fluorescent assay involving M. smegmatis expressing gfp was analyzed as a rapid assay for predicting inhibitory activity, but failed to predict activity well. Our compounds may have significant utility as soluble biocides against mycobacteria and other hardy nosocomial pathogens.     

A simple method to evaluate the potential for degradation of antifouling biocides

A simple method to measure the degradation of antifouling biocides is described which measures the loss of biocidal activity from seawater by bioassay. The bioassay employs either the ship‐fouling diatom Amphora or the brine shrimp Anemia. Loss of bioaclivity from sterile seawater indicates abiotic degradation whilst loss of bioactivity from natural seawater indicates biodegradation. Results are presented for three biocides, viz. the trihalomethylthio compound, N‐dichlorofluoromethylthio‐N’,N'‐dimethyl‐N‐phenyl‐sulphamide (Preventol A4S), di‐n‐octylamine, and the isothiazolone compound 4,5‐dichloro‐2‐n‐octyl‐4‐isothiazolin‐3‐one (Sea‐Nine 211).     

Development of multiplex PCR assays based on the 16S-23S rRNA internal transcribed spacer for the detection of clinically relevant nontuberculous mycobacteria

Aims: To accelerate the identification and differentiation of clinically relevant nontuberculous mycobacteria (NTM) with two sets of multiplex PCR (mPCR) targeting the 16S–23S rRNA internal transcribed spacer (ITS) region for timely patient management. Methods and Results: Two mPCR assays were developed: Slow‐Growers (SG) mPCR was used for the detection of slow‐growing mycobacteria, which included Mycobacterium avium complex, Mycobacterium kansasii, Mycobacterium gordonae and Mycobacterium xenopi whilst the other mPCR assay labelled as Fast‐Growers (FG) mPCR was used for the detection of Mycobacterium fortuitum complex, Mycobacterium abscessus and Mycobacterium chelonae. In these assays, a common forward primer based on a conserved section of the 16S rRNA region was used in conjunction with species‐specific reverse primers. The mPCRs were tested against 247 clinical mycobacterial isolates and demonstrated 100% specificity and sensitivity. Identification of the mycobacterial species was also validated by DNA sequencing of the 16S–23S ITS region and when further confirmation was needed, hsp65 sequencing was performed. Conclusions: The mPCR assays could be a potentially useful diagnostic tool for the rapid and accurate identification of clinically relevant NTM. Significance and Impact of the Study: In this study, we looked at the frequency of hospital isolated NTM over the last 5 years (2005–2010), and an mPCR targeting the ITS region was developed for NTM species that appeared to be more prevalent in the context of Singapore.     

Differential biocide susceptibility of the multiple genotypes of <Emphasis Type="Italic">Mycobacterium immunogenum</Emphasis>

The non-tuberculous mycobacterium Mycobacterium immunogenum colonizes industrial metalworking fluids (MWFs) presumably due to its relative resistance to the currently practiced biocides and has been implicated in occupational respiratory hazards, particularly hypersensitivity pneumonitis. With an aim to understand its inherent biocide susceptibility profile and survival potential in MWF, five different genotypes of this organism, including a reference genotype (700506) and four novel test genotypes (MJY-3, MJY-4, MJY-10 and MJY-12) isolated in our recent study from diverse MWF operations were evaluated. For this, two commercial biocide formulations, Grotan (Hexahydro-1,3,5-tris(2-hydroxyethyl)-s-triazine) and Kathon (5-chloro-2-methyl-4-isothiazolin-3-one) currently practiced for the control of microorganisms, including mycobacteria, in MWF operations were tested. Effect of the fluid matrix on the biocide susceptibility was investigated for the synthetic (S) and semi-synthetic (SS) MWF matrices. In general, the minimum inhibitory concentration values were higher for the HCHO-releasing biocide Grotan than the isothiazolone biocide Kathon. All genotypes (except the reference genotype) showed lower susceptibility in SS as compared to S fluid matrix for Grotan. However, in case of Kathon, a greater susceptibility was observed in SS fluid for majority of the test genotypes (MJY-3, 4 and 10). The test genotypes were more resistant than the reference genotype to either biocide in both fluid types. Furthermore, the individual genotypes showed differential biocidal susceptibility, with MJY-10 being the most resistant. These observations emphasize the importance of using the resistant genotypes of M. immunogenum as the test strains for formulation or development and evaluation of existing and novel biocides, for industrial applications.     

Penitentiary or penthouse condo: the tuberculous granuloma from the microbe's point of view

Granuloma formation represents a pivotal point during human infection with Mycobacterium tuberculosis, for this structure may limit mycobacterial spread and prevent active disease, while at the same time allow for the survival and persistence of viable mycobacteria within the host. The current therapeutic regimens for treating tuberculosis disease have proven effective in developing countries. However, in countries with large populations, limited access to health care, and high incidence of HIV co‐infection, tuberculosis disease continues to represent a major global health emergency. Particularly, the emergence of extensively and multi‐drug‐resistant forms of tuberculosis underscores the need develop new treatment strategies. Recent mechanistic studies have identified bacterial virulence mechanisms that subvert host responses and lead to an inappropriate upregulation of host factors such as tumour necrosis factor‐α (TNF‐α) and matrix metalloproteinases (MMPs). Paradoxically, then, part of the mycobacterial virulence programme may be to promote granuloma development and maturation. These observations suggest that together with appropriate anti‐microbials host‐based therapeutics directed at TNF‐α and MMP inhibition may counteract the microbial subterfuge, reduce the pro‐granulomatous response, and offer an enhanced therapeutic effect. Host‐directed therapy that alters the immune response may offer an alternative approach towards reducing treatment duration, the risk of anti‐microbial resistance and improving patient outcome.     

Proteomics approach to understand reduced clearance of mycobacteria and high viral titers during HIV–mycobacteria co‐infection

Environmental mycobacteria, highly prevalent in natural and artificial (including chlorinated municipal water) niches, are emerging as new threat to human health, especially to HIV‐infected population. These seemingly harmless non‐pathogenic mycobacteria, which are otherwise cleared, establish as opportunistic infections adding to HIV‐associated complications. Although immune‐evading strategies of pathogenic mycobacteria are known, the mechanisms underlying the early events by which opportunistic mycobacteria establish infection in macrophages and influencing HIV infection are unclear. Proteomics of phagosome‐enriched fractions from Mycobacterium bovis Bacillus Calmette–Guérin (BCG) mono‐infected and HIV–M. bovis BCG co‐infected THP‐1 cells by LC‐MALDI‐MS/MS revealed differential distribution of 260 proteins. Validation of the proteomics data showed that HIV co‐infection helped the survival of non‐pathogenic mycobacteria by obstructing phagosome maturation, promoting lipid biogenesis and increasing intracellular ATP equivalents. In turn, mycobacterial co‐infection up‐regulated purinergic receptors in macrophages that are known to support HIV entry, explaining increased viral titers during co‐infection. The mutualism was reconfirmed using clinically relevant opportunistic mycobacteria, Mycobacterium avium, Mycobacterium kansasii and Mycobacterium phlei that exhibited increased survival during co‐infection, together with increase in HIV titers. Additionally, the catalogued proteins in the study provide new leads that will significantly add to the understanding of the biology of opportunistic mycobacteria and HIV coalition.     

Use of dissolved ozone for controlling planktonic and sessile bacteria in industrial cooling systems

Cooling water treatment requires effective, environmentally-safe biocides compatible with system operation. The unique combination of high biocidal activity during use with no toxic discharge, could render dissolved ozone a safe biocide for cooling water treatment. Planktonic and sessile cells of Pseudomonas fluorescens (a frequent microbial contaminant of industrial systems) were used in this work to assess the biocidal effectiveness of ozone. Dissolved ozone showed to be effective at concentrations between 0.1 and 0.3 ppm, to eliminate completely the levels of planktonic cells used in this paper (10⁷–10⁸ cell/ml) within a range of contact times between 10 and 30 min. However, ozone at 0.15 ppm was only able to diminish sessile cell population by two or three orders of magnitude. This minor biocidal effectiveness of ozone against bacterial biofilms is discussed in this paper, taking into account recent concepts on structure and dynamics of biofilms. Different metallic substrata were assayed to verify if there was any effect of metal nature on the biocidal action. Open circuit potentials vs. time experiments and potentiodynamic polarization curves were made for assessing the effect of dissolved ozone on the corrosion behavior of the metals tested.     

Enhancement of the antimicrobial performance of biocidal formulations used for the preservation of white mineral dispersions

Biocides play an important role in the preservation of white mineral dispersions (WMD). Due to the occurrence of biocide-resistant bacteria and technical limitations in the use of biocides, new preservation strategies are required—like the enhancement of biocides by non-biocidal compounds. The aim of this study was to evaluate the biocide enhancement performance of lithium against various biocide-resistant bacteria in WMD. Subsequently, the minimal enhancing concentration (MEC) of lithium and the bioavailability of lithium in respect to the mode of introduction into WMD were investigated. The antimicrobial performance of biocidal formulations comprising isothiazolinones and formaldehyde releasers or isothiazolinones and glutaraldehyde has been evaluated against the related resistant bacterial spectrum in the presence of lithium. The MEC of lithium ranged from 1,350 to 1,500 ppm (based on the liquid phase weight of a WMD with 75% solids) for formaldehyde releasers and glutaraldehyde-based biocidal formulations, respectively. The biocide enhancing property of lithium was independent of whether lithium was introduced into WMD via a lithium-neutralised dispersant, added during the calcium carbonate grinding step, or dosed into the final product. Lithium is a non-biocidal compound which has been discovered to be a potent and universal biocide enhancer. Lithium boosts the biocidal activity of various biocides and provides a novel technique to overcome biocide resistance in WMD. Such a biocide enhancer represents a breakthrough that offers a potential tool to revolutionise the consumption of biocidal agents in the WMD producing industry.     

Acyldepsipeptide antibiotics kill mycobacteria by preventing the physiological functions of the ClpP1P2 protease

The Clp protease complex in Mycobacterium tuberculosis is unusual in its composition, functional importance and activation mechanism. Whilst most bacterial species contain a single ClpP protein that is dispensable for normal growth, mycobacteria have two ClpPs, ClpP1 and ClpP2, which are essential for viability and together form the ClpP1P2 tetradecamer. Acyldepsipeptide antibiotics of the ADEP class inhibit the growth of Gram‐positive firmicutes by activating ClpP and causing unregulated protein degradation. Here we show that, in contrast, mycobacteria are killed by ADEP through inhibition of ClpP function. Although ADEPs can stimulate purified M. tuberculosis ClpP1P2 to degrade larger peptides and unstructured proteins, this effect is weaker than for ClpP from other bacteria and depends on the presence of an additional activating factor (e.g. the dipeptide benzyloxycarbonyl‐leucyl‐leucine in vitro) to form the active ClpP1P2 tetradecamer. The cell division protein FtsZ, which is a particularly sensitive target for ADEP‐activated ClpP in firmicutes, is not degraded in mycobacteria. Depletion of the ClpP1P2 level in a conditional Mycobacterium bovis BCG mutant enhanced killing by ADEP unlike in other bacteria. In summary, ADEPs kill mycobacteria by preventing interaction of ClpP1P2 with the regulatory ATPases, ClpX or ClpC1, thus inhibiting essential ATP‐dependent protein degradation.     

Mycobacteria employ two different mechanisms to cross the blood–brain barrier

Central nervous system (CNS) infection by Mycobacterium tuberculosis is one of the most devastating complications of tuberculosis, in particular in early childhood. In order to induce CNS infection, M. tuberculosis needs to cross specialised barriers protecting the brain. How M. tuberculosis crosses the blood–brain barrier (BBB) and enters the CNS is not well understood. Here, we use transparent zebrafish larvae and the closely related pathogen Mycobacterium marinum to answer this question. We show that in the early stages of development, mycobacteria rapidly infect brain tissue, either as free mycobacteria or within circulating macrophages. After the formation of a functionally intact BBB, the infiltration of brain tissue by infected macrophages is delayed, but not blocked, suggesting that crossing the BBB via phagocytic cells is one of the mechanisms used by mycobacteria to invade the CNS. Interestingly, depletion of phagocytic cells did not prevent M. marinum from infecting the brain tissue, indicating that free mycobacteria can independently cause brain infection. Detailed analysis showed that mycobacteria are able to cause vasculitis by extracellular outgrowth in the smaller blood vessels and by infecting endothelial cells. Importantly, we could show that this second mechanism is an active process that depends on an intact ESX‐1 secretion system, which extends the role of ESX‐1 secretion beyond the macrophage infection cycle.     

Specific detection and quantification of culturable and non-culturable mycobacteria in metalworking fluids by fluorescence-based methods

Aims: To optimize and evaluate fluorescence microscopy assays for specific assessment of mycobacteria and co‐contaminants, including culturable and non‐culturable sub‐populations, in metalworking fluids (MWF). Methods and Results: Auramine‐O‐rhodamine (AR) staining and LIVE/DEAD BacLight? Bacterial Viability staining (L/D staining) were adapted and evaluated for detection/quantification and differentiation (viable vs non‐viable) of the MWF‐associated mycobacteria and the background bacterial flora, respectively. The AR staining method was found to be specific to MWF mycobacteria with a minimum detection limit of 10 cells ml^?1 and was comparable to the QPCR in quantification efficiency in MWF matrix. The L/D staining‐based microscopy allowed differential quantification of viable vs non‐viable cells. In general, a 3‐log difference was observed between the L/D microscopy count and culture count accounting for the presence of non‐culturable fraction in the bacterial population in in‐use MWF. Conclusions: The optimized AR staining‐ and the L/D staining‐based microscopy methods have the potential for rapid, specific and differential assessment (viable vs non‐viable) of MWF‐associated mycobacteria and co‐contaminants in field MWF. Significance and Impact of the study: Early detection of MWF mycobacteria by rapid, low‐cost, less‐skill intensive and culture‐independent fluorescence‐based microscopy methods will facilitate timely intervention to protect the machine workers from occupational hazards.     

Identification of bacterial contaminants from calcium carbonate filler production lines and an evaluation of biocide based decontamination procedures

The aim of this study was to analyze the bacterial community in the production line of a calcium carbonate filler production company and to investigate possible causes for bacterial presence. Throughout 2012, 24 carbonate slurry and six groundwater samples were analyzed. Pseudomonas and Microbacterium were the most frequent contaminants in the slurry, whereas Pseudomonas and Brevundimonas dominated the groundwater samples. Of the 43 different bacterial strains isolated, only five were found both in the slurry and the groundwater, indicating that the latter was not a major source of contamination. The efficacy of 54 commercial biocidal formulations was tested against an artificial bacterial consortium composed of selected slurry isolates. A formulation containing 7.5–15% (v v^–1) bronopol and 1.0–2.5% (v v^–1) [chloroisothiazolinone (CIT) + methylisothiazolinone (MIT)] exhibited the highest efficacy. Of the possible causes for bacterial presence, sporogenesis and biocide adsorption to carbonate particles were found to be less probable compared to bacterial adsorption to particles, and the acquisition of resistance to biocides.