Solid-state NMR studies of the membrane-bound closed state of the colicin E1 channel domain in lipid bilayers.

The colicin E1 channel polypeptide was shown to be organized anisotropically in membranes by solid-state NMR analysis of samples of uniformly 15N-labeled protein in oriented planar phospholipid bilayers. The 190 residue C-terminal colicin E1 channel domain is the largest polypeptide to have been characterized by 15N solid-state NMR spectroscopy in oriented membrane bilayers. The 15N-NMR spectra of the colicin E1 show that: (1) the structure and dynamics are independent of anionic lipid content in both oriented and unoriented samples; (2) assuming the secondary structure of the polypeptide is helical, there are both trans-membrane and in-plane helical segments; (3) trans-membrane helices account for approximately 20-25% of the channel polypeptide, which is equivalent to 38-48 residues of the 190-residue polypeptide. The results of the two-dimensional PISEMA spectrum are interpreted in terms of a single trans-membrane helical hairpin inserted into the bilayer from each channel molecule. These data are also consistent with this helical hairpin being derived from the 38-residue hydrophobic segment near the C-terminus of the colicin E1 channel polypeptide.     

A 136-amino-acid-residue COOH-terminal fragment of colicin A is endowed with ionophoric activity.

DNA regions encoding the various domains of a protein can be expressed as separate entities by inserting at appropriate sites a 'STOP-Shine-Dalgarno-sequence-ATG' cassette encoding a termination codon, a Shine-Dalgano sequence and an initiation codon within the structural gene. This technique has been used to obtain a 137-amino-acid-residue pore-forming protein designated DA70C comprising the final 136-amino-acid-residue COOH-terminal of colicin A preceded by an NH2-terminal methionine. Da70C was correctly expressed but poorly released to the extracellular medium. Its purification involved, as a final step, a partition in Triton X-114 thus demonstrating that hydrophobic regions are exposed in this protein. The ability of DA70C to form ion channels in planar lipid bilayers was investigated and pore properties were analyzed. The results indicate that helices 1-3 of the 204-amino-acid-residue colicin pore-forming domain (containing 10 alpha-helices) are not involved in ion conduction through the channel. However, they are important in maintaining the stability of the soluble state of the COOH-terminal domain.     

The C-terminal half of the colicin A pore-forming domain is active in vivo and in vitro

The pore-forming domain of colicin A (pfColA) fused to a prokaryotic signal peptide (sp-pfColA) is transported across and inserts into the inner membrane of Escherichia coli from the periplasmic side and forms a functional channel. The soluble structure of pfColA consists of a ten-helix bundle containing a hydrophobic helical hairpin. Here, we generated a series of mutants in which an increasing number of sp-pfColA alpha-helices was deleted. These peptides were tested for their ability to form ion channels in vivo and in vitro. We found that the shortest sp-pfColA mutant protein that killed Escherichia coli was composed of the five last alpha-helices of sp-pfColA, whereas the shortest peptide that formed a channel in planar lipid bilayer membranes similar to that of intact pfColA was the protein composed of the last six alpha-helices. The peptide composed of the last five alpha-helices of pfColA generated a voltage-independent conductance in planar lipid bilayer with properties very different from that of intact pfColA. Thus, helices 1 to 4 are unnecessary for channel formation, while helix 5, or some part of it, is important but not absolutely necessary. Voltage-dependence of colicin is evidently controlled by the first four alpha-helices of pfColA.     

Modeling the ion channel structure of cecropin.

Atomic-scale computer models were developed for how cecropin peptides may assemble in membranes to form two types of ion channels. The models are based on experimental data and physiochemical principles. Initially, cecropin peptides, in a helix-bend-helix motif, were arranged as antiparallel dimers to position conserved residues of adjacent monomers in contact. The dimers were postulated to bind to the membrane with the NH2-terminal helices sunken into the head-group layer and the COOH-terminal helices spanning the hydrophobic core. This causes a thinning of the top lipid layer of the membrane. A collection of the membrane bound dimers were then used to form the type I channel structure, with the pore formed by the transmembrane COOH-terminal helices. Type I channels were then assembled into a hexagonal lattice to explain the large number of peptides that bind to the bacterium. A concerted conformational change of a type I channel leads to the larger type II channel, in which the pore is formed by the NH2-terminal helices. By having the dimers move together, the NH2-terminal helices are inserted into the hydrophobic core without having to desolvate the charged residues. It is also shown how this could bring lipid head-groups into the pore lining.     

Isolation and molecular and functional properties of the amino-terminal domain of colicin A

A plasmid was constructed which allowed easy and efficient production and purification of the NH2-terminal domain of colicin A. In only three steps, an homogenous 18-kDa polypeptide was obtained. The NH2- and COOH-terminal sequences of the protein were determined and showed that it corresponded to the NH2-terminal 171 amino acid residues of the 63-kDa colicin A. Although colicin A is a highly asymmetric protein, hydrodynamic studies indicated that the NH2-terminal domain (designated AT) has a globular structure. This fragment is not the receptor-binding domain of colicin A but is required for the transfer of colicin A across the outer membrane of sensitive cells. However, it has a low affinity for phospholipid films and this affinity is not pH-dependent, in contrast to that of colicin A.     

Membrane topography of ColE1 gene products: the hydrophobic anchor of the colicin E1 channel is a helical hairpin.

The paucity of crystallographic data on the structure of intrinsic membrane proteins necessitates the development of additional techniques to probe their structures. The colicin E1 ion channel domain contains one prominent hydrophobic region near its COOH terminus that has been proposed to be an anchor for the assembly of the channel. Saturation site-directed mutagenesis of the hydrophobic anchor region of the colicin E1 ion channel was used to probe whether it spanned the bilayer once or twice. A nonpolar amino acid was replaced by a charged residue in 29 mutations made at 26 positions in the channel domain. Substitution of the charged amino acid at all positions except those in the center of the hydrophobic region and the periphery of the hydrophobic region caused a large decrease in the cytotoxicity of the purified mutant colicin E1 protein. This result implies that the hydrophobic domain spans the membrane bilayer twice in a helical hairpin loop, with the center of this domain residing in an aqueous or polar phase. The lengths of the trans-membrane helices appear to be approximately 18 and 16 residues. The absence of significant changes in ion selectivity in five of nine mutants indicated that these mutations did not cause a large change in the channel structure. The ion selectivity changes in four mutants and those previously documented for the flanking Lys residues imply that the hydrophobic hairpin is part of the channel lumen. Water may "abhor" the hydrophobic side of the channel, explaining the small effects of residue charge changes on ion selectivity.     

Comparison of the macroscopic and single channel conductance properties of colicin E1 and its COOH-terminal tryptic peptide

A COOH-terminal tryptic fragment (Mr approximately equal to 20,000) of colicin E1 has been proposed to contain the membrane channel-forming domain of the colicin molecule. A comparison is made of the conductance properties of colicin E1 and its COOH-terminal fragment in planar bilayer membranes. The macroscopic and single channel properties of colicin E1 and its COOH-terminal tryptic fragment are very similar, if not indistinguishable, implying that the NH2-terminal, two-thirds of the colicin E1 molecule, does not significantly influence its channel properties. The channel-forming activity of both polypeptides is dependent upon the presence of a membrane potential, negative on the trans side of the membrane. The average single channel conductance of colicin E1 and the COOH-terminal fragment is 20.9 +/- 3.9 and 19.1 +/- 2.9 picosiemens, respectively. The rate at which both proteins form conducting channels increases as the pH is lowered from 7 to 5. Both molecules require negatively charged lipids for activity to be expressed, exhibit the same ion selectivity, and rectify the current to the same extent. Both polypeptides associate irreversibly with the membrane in the absence of voltage, but subsequent formation of conducting channels requires a negative membrane potential.     

Membrane topography of ColE1 gene products: the immunity protein.

The topography of the colicin E1 immunity (Imm) protein was determined from the positions of TnphoA and complementary lacZ fusions relative to the three long hydrophobic segments of the protein and site-directed substitution of charged for nonpolar residues in the proposed membrane-spanning segments. Inactivation of the Imm protein function required substitution and insertion of two such charges. It was concluded that the 113-residue colicin E1 Imm protein folds in the membrane as three trans-membrane alpha-helices, with the NH2 and COOH termini on the cytoplasmic and periplasmic sides of the membrane, respectively. The approximate spans of the three helices are Asn-9 to Ser-28, Ile-43 to Phe-62, and Leu-84 to Leu-104. An extrinsic highly charged segment, Lys-66 to Lys-74, containing seven charges in nine residues, extends into the cytoplasmic domain. The specificity of the colicin E1 Imm protein for interaction with the translocation apparatus and the colicin E1 ion channel is proposed to reside in its peripheral segments exposed on the surface of the inner membrane. These regions include the highly charged segment Lys-66 to Lys-83 (loop 2) and the short (approximately eight-residue) NH2 terminus on the cytoplasmic side, and Glu-29 to Val-44 (loop 1) and the COOH-terminal segment Gly-105 to Asn-113 on the periplasmic side.     

On the nature of the unfolded intermediate in the in vitro transition of the colicin E1 channel domain from the aqueous to the membrane phase.

The transition of the colicin E1 channel polypeptide from a water-soluble to membrane-bound state occurs in vitro at acid pH values that are associated with an unfolded channel structure whose properties qualitatively resemble those of a "molten globule," or "compact unfolded," intermediate state. The role of such a state for activity was tested by comparing the pH dependence of channel-induced solute efflux and the amplitude of the near-UV CD spectrum. The requirement of a partly unfolded state for activity was shown by the coincidence of the onset of channel activity measured for 4 different lipid compositions with the decrease in near-UV CD amplitude as a function of pH. Tertiary constraints on the 3 tryptophans of the colicin channel, assayed by the amplitude of the near-UV CD spectrum, are retained over the pH range 3-4 where channel activity could be measured and, as well, at pH 2. In addition, the tryptophan fluorescence emission spectrum is virtually unchanged over the pH range 2-6. The temperature independence of the near-UV spectrum at pH 3-6 up to 70 degrees C implies that the colicin E1 channel polypeptide is more stable than that of colicin A. A transition between 53 and 58 degrees C in the amplitude of the near-UV CD is consistent with preservation of part of the hydrophobic core in a destabilized state at pH 2. Thus, the unfolded state associated with colicin activity at acidic pH has the properties of a "compact unfolded" state, having some, but not all of the properties of a "molten globule."(ABSTRACT TRUNCATED AT 250 WORDS)     

Helical structure of the COOH terminus of S3 and its contribution to the gating modifier toxin receptor in voltage-gated ion channels

The voltage-sensing domains in voltage-gated K(+) channels each contain four transmembrane (TM) segments, termed S1 to S4. Previous scanning mutagenesis studies suggest that S1 and S2 are amphipathic membrane spanning alpha-helices that interface directly with the lipid membrane. In contrast, the secondary structure of and/or the environments surrounding S3 and S4 are more complex. For S3, although the NH(2)-terminal part displays significant helical character in both tryptophan- and alanine-scanning mutagenesis studies, the structure of the COOH-terminal portion of this TM is less clear. The COOH terminus of S3 is particularly interesting because this is where gating modifier toxins like Hanatoxin interact with different voltage-gated ion channels. To further examine the secondary structure of the COOH terminus of S3, we lysine-scanned this region in the drk1 K(+) channel and examined the mutation-induced changes in channel gating and Hanatoxin binding affinity, looking for periodicity characteristic of an alpha-helix. Both the mutation-induced perturbation in the toxin-channel interaction and in gating support the presence of an alpha-helix of at least 10 residues in length in the COOH terminus of S3. Together with previous scanning mutagenesis studies, these results suggest that, in voltage-gated K(+) channels, the entire S3 segment is helical, but that it can be divided into two parts. The NH(2)-terminal part of S3 interfaces with both lipid and protein, whereas the COOH-terminal part interfaces with water (where Hanatoxin binds) and possibly protein. A conserved proline residue is located near the boundary between the two parts of S3, arguing for the presence of a kink in this region. Several lines of evidence suggest that these structural features of S3 probably exist in all voltage-gated ion channels.     

In vivo phosphorylation of CFTR promotes formation of a nucleotide-binding domain heterodimer

The human ATP-binding cassette (ABC) protein CFTR (cystic fibrosis transmembrane conductance regulator) is a chloride channel, whose dysfunction causes cystic fibrosis. To gain structural insight into the dynamic interaction between CFTR's nucleotide-binding domains (NBDs) proposed to underlie channel gating, we introduced target cysteines into the NBDs, expressed the channels in Xenopus oocytes, and used in vivo sulfhydryl-specific crosslinking to directly examine the cysteines' proximity. We tested five cysteine pairs, each comprising one introduced cysteine in the NH(2)-terminal NBD1 and another in the COOH-terminal NBD2. Identification of crosslinked product was facilitated by co-expression of NH(2)-terminal and COOH-terminal CFTR half channels each containing one NBD. The COOH-terminal half channel lacked all native cysteines. None of CFTR's 18 native cysteines was found essential for wild type-like, phosphorylation- and ATP-dependent, channel gating. The observed crosslinks demonstrate that NBD1 and NBD2 interact in a head-to-tail configuration analogous to that in homodimeric crystal structures of nucleotide-bound prokaryotic NBDs. CFTR phosphorylation by PKA strongly promoted both crosslinking and opening of the split channels, firmly linking head-to-tail NBD1-NBD2 association to channel opening.     

DNA-induced alpha-helical structure in the NH2-terminal domain of histone H1

It is important to establish the structural properties of linker histones to understand the role they play in chromatin higher order structure and gene regulation. Here, we use CD, NMR, and IR spectroscopy to study the conformation of the amino-terminal domain of histone H1 degrees, free in solution and bound to the DNA. The NH(2)-terminal domain has little structure in aqueous solution, but it acquires a substantial amount of alpha-helical structure in the presence of trifluoroethanol (TFE). As in other H1 subtypes, the basic residues of the NH(2)-terminal domain of histone H1 degrees are clustered in its COOH-terminal half. According to the NMR results, the helical region comprises the basic cluster (Lys(11)-Lys(20)) and extends until Asp(23). The fractional helicity of this region in 90% TFE is about 50%. His(24) together with Pro(25) constitute the joint between the NH(2)-terminal helix and helix I of the globular domain. Infrared spectroscopy shows that interaction with the DNA induces an amount of alpha-helical structure equivalent to that observed in TFE. As coulombic interactions are involved in complex formation, it is highly likely in the complexes with DNA that the minimal region with alpha-helical structure is that containing the basic cluster. In chromatin, the high positive charge density of the inducible NH(2)-terminal helical element may contribute to the binding stability of the globular domain.     

A GrpE mutant containing the NH(2)-terminal "tail" region is able to displace bound polypeptide substrate from DnaK

A key feature to the dimeric structure for the GrpE heat shock protein is the pair of long helices at the NH(2)-terminal end followed by a presumable extended segment of about 30 amino acids from each monomer. We have constructed a GrpE deletion mutant protein that contains only the unique tail portion (GrpE1-89) and another that is missing this region (GrpE88-197). Circular dichroism analysis shows that the GrpE1-89 mutant still contains one-third percent alpha-helical secondary structure. Using an assay that measures bound peptide to DnaK we show that the GrpE1-89 is able to lower the amount of bound peptide, whereas GrpE88-197 has no effect. Additionally, when the same peptide binding assay is carried out with the COOH-terminal domain of DnaK, the full-length GrpE and the two GrpE deletion mutants show little to no effect on peptide release. Furthermore, the GrpE88-197 mutant is able to enhance the off-rate of nucleotide from DnaK and the 1-89 mutant has no effect on the nucleotide release. Similar results of nucleotide release are observed with the NH(2)-terminal ATPase domain mutant of DnaK. The results presented show directly that there is interaction between the GrpE protein's "tail" region and the substrate COOH-terminal peptide binding domain of DnaK, although the effect is only fully manifest with an intact full-length DnaK molecule.     

Processing of pulmonary surfactant protein B by napsin and cathepsin H

Surfactant protein B (SP-B) is an essential constituent of pulmonary surfactant. SP-B is synthesized in alveolar type II cells as a preproprotein and processed to the mature peptide by the cleavage of NH2- and COOH-terminal peptides. An aspartyl protease has been suggested to cleave the NH2-terminal propeptide resulting in a 25-kDa intermediate. Napsin, an aspartyl protease expressed in alveolar type II cells, was detected in fetal lung homogenates as early as day 16 of gestation, 1 day before the onset of SP-B expression and processing. Napsin was localized to multivesicular bodies, the site of SP-B proprotein processing in type II cells. Incubation of SP-B proprotein from type II cells with a crude membrane extract from napsin-transfected cells resulted in enhanced levels of a 25-kDa intermediate. Purified napsin cleaved a recombinant SP-B/EGFP fusion protein within the NH2-terminal propeptide between Leu178 and Pro179, 22 amino acids upstream of the NH2 terminus of mature SP-B. Cathepsin H, a cysteine protease also implicated in pro-SP-B processing, cleaved SP-B/EGFP fusion protein 13 amino acids upstream of the NH2 terminus of mature SP-B. Napsin did not cleave the COOH-terminal peptide, whereas cathepsin H cleaved the boundary between mature SP-B and the COOH-terminal peptide and at several other sites within the COOH-terminal peptide. Knockdown of napsin by small interfering RNA resulted in decreased levels of mature SP-B and mature SP-C in type II cells. These results suggest that napsin, cathepsin H, and at least one other enzyme are involved in maturation of the biologically active SP-B peptide.     

Endogenous lectin from cultured soybean cells: exposure of the SB-1 lectin on the cell wall

Digestion of seed soybean agglutinin with V-8 protease yielded seven distinct fragments (Mr 10,000-20,000) that were well-resolved by polyacrylamide gel electrophoresis in the presence of sodium dodecyl sulfate. Each individual peptide (F1 through F7) was isolated; determination of the amino acid sequence at the NH2-terminal portion of each peptide established its position in the intact polypeptide of soybean agglutinin. The isolated peptides were used as affinity adsorbents to obtain antibodies that bound individual fragments (anti-F1 through anti-F7). These antibody preparations were, in turn, used in immunofluorescence staining of intact cultured soybean (SB-1) cells. Only those antibody preparations that bind to the NH2-terminal portion (residues 1-124) of the intact soybean agglutinin showed significant cell surface labeling. In contrast, the antibody preparations that bound to residues 125-253 failed to bind to intact SB-1 cells. These results suggest that the SB-1 lectin has the NH2-terminal portion of the polypeptide chain exposed and accessible at the cell surface, while the COOH-terminal portion of the same molecule may be masked, either through protein folding or through embedding in the cell wall. Limited digestion of the cell wall polysaccharides by cellulase or pectinase released the majority of the cell surface lectin.     

Direct evidence for the cytoplasmic location of the NH2- and COOH-terminal ends of the Neurospora crassa plasma membrane H+-ATPase

Reconstituted proteoliposomes containing Neurospora plasma membrane H+-ATPase molecules oriented predominantly with their cytoplasmic portion facing outward have been used to determine the location of the NH2 and COOH termini of the H+-ATPase relative to the lipid bilayer. Treatment of the proteoliposomes with trypsin in the presence of the H+-ATPase ligands Mg2+, ATP, and vanadate produces approximately 97-, 95-, and 88-kDa truncated forms of the H+-ATPase similar to those already known to result from cleavage at Lys24, Lys36, and Arg73 at the NH2-terminal end of the molecule. These results establish that the NH2-terminal end of the H+-ATPase polypeptide chain is located on the cytoplasmic side of the membrane. Treatment of the same proteoliposome preparation with trypsin in the absence of ligands releases approximately 50 water-soluble peptides from the proteoliposomes. Separation of the released peptides by high performance liquid chromatography and spectral analysis of the purified peptides identified only a few peptides with the properties expected of a COOH-terminal, tryptic undecapeptide with the sequence SLEDFVVSLQR, and NH2-terminal amino acid sequence analysis identified this peptide among the possible candidates. Quantitative considerations indicate that this peptide must have come from H+-ATPase molecules oriented with their cytoplasmic portion facing outward, and could not have originated from a minor population of H+-ATPase molecules of reverse orientation. These results directly establish that the COOH-terminal end of the H+-ATPase is also located on the cytoplasmic side of the membrane. These findings are important for elucidating the topography of the membrane-bound H+-ATPase and are possibly relevant to the topography of other aspartyl-phosphoryl-enzyme intermediate ATPases as well.     

A very short peptide makes a voltage-dependent ion channel: the critical length of the channel domain of colicin E1

Cleavage of colicin E1 molecules with a variety of proteases or with cyanogen bromide (CNBr) generates COOH-terminal fragments which have channel-forming activity similar to that of intact colicin in planar lipid bilayer membranes. The smallest channel-forming fragment obtained by CNBr cleavage of the wild-type molecule consists of the C-terminal 152 amino acids. By the use of oligonucleotide-directed mutagenesis, we have made nine mutants along this 152 amino acid peptide, in which an amino acid was replaced by methionine in order to create a new CNBr cleavage site. The smallest of the CNBr-cleaved C-terminal fragments with channel-forming activity, in planar bilayer membranes, was generated by cleavage at new Met position 428 and has 94 amino acids, whereas a 75 amino acid peptide produced by cleavage of a new Met at position 447 did not have channel activity. The NH2-terminus of the channel-forming domain of colicin E1 appears therefore to lie between residues 428 and 447. Since, however, the last six C-terminal residues of the colicin can be removed without changing activity, the number of amino acids necessary to form the channel is 88 or less. In addition, the unique Cys residue in colicin E1 was replaced by Gly, and nine mutants were then made with Cys placed at sequential locations along the peptide for eventual use as sulfhydryl attachment sites to determine the local environment of the replaced amino acid. In the course of making 21 mutants, eight charged residues have been replaced by uncharged Met or Cys without changing the biological activity of the intact molecule. It has been proposed previously that the conformation of the colicin E1 channel is a barrel formed from five or six alpha-helices, each having 20 amino acids spanning the membrane and two to four residues making the turn at the boundary of the membrane. Our finding that 88 amino acids can make an active channel, combined with recently reported stoichiometric evidence that the channel is a monomer excludes this model and adds significant constraints which can be used in building a molecular model of the channel.     

Fourier transform infrared evidence for a predominantly alpha-helical structure of the membrane bound channel forming COOH-terminal peptide of colicin E1.

The structure of the membrane bound state of the 178-residue thermolytic COOH-terminal channel forming peptide of colicin E1 was studied by polarized Fourier transform infrared (FTIR) spectroscopy. This fragment was reconstituted into DMPC liposomes at varying peptide/lipid ratios ranging from 1/25-1/500. The amide I band frequency of the protein indicated a dominant alpha-helical secondary structure with limited beta- and random structures. The amide I and II frequencies are at 1,656 and 1,546 cm-1, close to the frequency of the amide I and II bands of rhodopsin, bacteriorhodopsin and other alpha-helical proteins. Polarized FTIR of oriented membranes revealed that the alpha-helices have an average orientation less than the magic angle, 54.6 degrees, relative to the membrane normal. Almost all of the peptide groups in the membrane-bound channel protein undergo rapid hydrogen/deuterium (H/D) exchange. These results are contrasted to the alpha-helical membrane proteins, bacteriorhodopsin, and rhodopsin.     

Structure and dynamics of the colicin E1 channel

The toxin-like and bactericidal colicin E1 molecule is of interest for problems of toxin action, polypeptide translocation across membranes, voltage-gated channels, and receptor function. Colicin E1 binds to a receptor in the outer membrane and is translocated across the cell envelope to the inner membrane. Import of the colicin channel-forming domain into the inner membrane involves a translocation-competent intermediate state and a membrane potential-dependent movement of one third to one half of the channel peptide into the membrane bilayer. The voltage-gated channel has a conductance sufficiently large to depolarize the Escherichia coli cytoplasmic membrane. Amino acid residues that affect the channel ion selectivity have been identified by site-directed mutagenesis. The colicin E1 channel is one of a few membrane proteins whose secondary structures in the membrane, predominantly alpha-helix, have been determined by physico-chemical techniques. Hypothesis for the identity of the trans-membrane helices, and the mechanism of binding to the membrane, are influenced by the solved crystal structure of the soluble colicin A channel peptide. The protective action of immunity protein is a unique aspect of the colicin problem, and information has been obtained, by genetic techniques, about the probable membrane topography of the imm gene product.     

Single-stranded DNA binding proteins (SSBs) from prokaryotic transmissible plasmids

The DNA and protein sequences of single-stranded DNA binding proteins (SSBs) encoded by the plP71a, plP231a, and R64 conjugative plasmids have been determined and compared to Escherichia coli SSB and the SSB encoded by F-plasmid. Although the amino acid sequences of all of these proteins are highly conserved within the NH2-terminal two-thirds of the protein, they diverge in the COOH-terminal third region. A number of amino acid residues which have previously been implicated as being either directly or indirectly involved in DNA binding are conserved in all of these SSBs. These residues include Trp-40, Trp-54, Trp-88, His-55, and Phe-60. On the basis of these sequence comparisons and DNA binding studies, a role for Tyr-70 in DNA binding is suggested for the first time. Although the COOH-terminal third of these proteins diverges more than their NH2-terminal regions, the COOH-terminal five amino acid residues of all five of these proteins are identical. In addition, all of these proteins share the characteristic property of having a protease resistant, NH2-terminal core and an acidic COOH-terminal region. Despite the high degree of sequence homology among the plasmid SSB proteins, the F-plasmid SSB appears unique in that it was the only SSB tested that neither bound well to poly(dA) nor was able to stimulate DNA polymerase III holoenzyme elongation rates. Poly [d(A-T)] melting studies suggest that at least three of the plasmid encoded SSBs are better helix-destabilizing proteins than is the E. coli SSB protein.