Phosphate adsorption kinetics of resuspended sediments in a shallow lake,Neusiedlersee, Austria

The phosphate adsorption capacity of Neusiedlersee suspended sediments was evaluated using a silicone oil-filter-centrifugation technique with³²P and³H-H₂O labelling. This technique is quick, convenient and allows uptake processes to be followed during the first few seconds. The time dependent phosphate uptake was tested for concentration and pH dependency; the highest uptake was recorded at pH 9.00. The high calcite proportion in the sestonic material seems to influence the adsorption process. The kinetics of adsorption (at lake orthophosphate level and pH) could be explained by a biphasic Langmuir isotherm.     

Aggregation of a monoclonal antibody induced by adsorption to stainless steel

Stainless steel is a ubiquitous surface in therapeutic protein production equipment and is also present as the needle in pre‐filled syringe biopharmaceutical products. Stainless steel microparticles can cause the aggregation of a monoclonal antibody (mAb). The initial rate of mAb aggregation was second order in steel surface area and zero order in mAb concentration, generally consistent with a bimolecular surface aggregation being the rate‐limiting step. Polysorbate 20 (PS20) suppressed the aggregation yet was unable to desorb the firmly bound first layer of protein that adsorbs to the stainless steel surface. Also, there was no exchange of mAb from the first adsorbed layer to the bulk phase, suggesting that the aggregation process actually occurs on subsequent adsorption layers. No oxidized Met residues were detected in the mass spectrum of a digest of a highly aggregated mAb, although there was a fourfold increase in carbonyl groups due to protein oxidation. Biotechnol. Bioeng. 2010;105: 121–129. © 2009 Wiley Periodicals, Inc.     

Sulphur mineralization and adsorption in soils

Summary Studies were conducted to determine the comparative sulphur mineralizing capacity of selected Malaysian and Iowan soils and to determine the amounts of available and adsorbed sulphate in a number of Malaysian soils. Results of the mineralization study indicated that more sulphur mineralised from Malaysian soils although their average contents of total sulphur were lower compared to Iowan Soils. For both sets of soils, significant correlations between contents of organic carbon and total sulphur existed indicating that most of the sulphur was in organic combination. Phosphate solution consistently extracted higher quantities of sulphate in comparison to chloride solution in the Malaysian surface soils implying that a portion of the sulphate existed in adsorbed form. Adsorption of sulphate in soils was found to be dependent on concentration of sulphate added and followed the Langmuir adsorption isotherm.     

Ni (II) adsorption onto Chrysanthemum indicum: Influencing factors,isotherms, kinetics,and thermodynamics

The study explores the adsorption potential of Chrysanthemum indicum biomass for nickel ion removal from aqueous solution. C. indicum flowers in raw (CIF-I) and biochar (CIF-II) forms were used as adsorbents in this study. Batch experiments were conducted to ascertain the optimum conditions of solution pH, adsorbent dosage, contact time, and temperature for varying initial Ni(II) ion concentrations. Surface area, surface morphology, and functionality of the adsorbents were characterized by Brunauer, Emmett, and Teller (BET) surface analysis, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and Fourier transform infrared spectroscopy (FTIR). Adsorption kinetics were modeled using pseudo-first order, pseudo-second order, Elovich, intraparticle diffusion, Bangham's, and Boyd's plot. The equilibrium data were modeled using Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich (D-R) isotherm models. Experimental data provided the best fit to pseudo-second-order kinetic model and Langmuir isotherm model for the adsorption of Ni(II) ion on both CIF-I and CIF-II with maximum adsorption capacities of 23.97 and 44.02 mg g^?1, respectively. Thermodynamic analysis of the data proved the process to be spontaneous and endothermic in nature. Desorption studies were conducted to evaluate the possibility of reusing the adsorbents. Findings of the present study provide substantial evidence for the use of C. indicum flower as an eco-friendly and potential adsorbent for the removal of Ni(II) ions from aqueous solution.     

Bioremediation of cadmium-contaminated water systems using intact and alkaline-treated alga (Hydrodictyon reticulatum) naturally grown in an ecosystem

Cadmium can enter water, soil, and food chain in amounts harmful to human health by industrial wastes. The use of intact and NaOH-treated dried algal tissues (Hydrodictyon reticulatum), a major ecosystem bio-component, for Cd removal from aqueous solutions was characterized. Cadmium biosorption was found to be dependent on solution pH, bioadsorbent dose, the interaction between pH and dose, contact time, and initial Cd concentration. The experimental results indicated that the biosorption performance of alkaline-treated algal tissues was better than that of intact tissues. The maximum biosorption capacities were 7.40 and 12.74 mg g^?1 for intact and alkaline-treated bioadsorbents, respectively, at optimum operating conditions. Biosorption reaches equilibrium after 24 and 240 minutes of contact, respectively, for alkaline-treated and intact bioadsorbents. Cadmium biosorption was best fitted to Langmuir isotherm model (R² ≈ 0.99) and the kinetic study obeyed the pseudo-second-order kinetic model, which suggests chemisorption as the rate-limiting step in the biosorption process. Alkaline-treated algal tissues can be used as a new material of low-cost bioadsorbent for continuous flow rate treatment systems.     

Kinetic,thermodynamic, and equilibrium biosorption of Pb(II), Cu(II), and Ni(II) using dead mushroom biomass under batch experiment

In this study, a low-cost biosorbent, dead mushroom biomass (DMB) granules, was used for investigating the optimum conditions of Pb(II), Cu(II), and Ni(II) biosorption from aqueous solutions. Various physicochemical parameters, such as initial metal ion concentration, equilibrium time, pH value, agitation speed, particles diameter, and adsorbent dosage, were studied. Five mathematical models describing the biosorption equilibrium and isotherm constants were tested to find the maximum uptake capacities: Langmuir, Freundlich, Redlich-Peterson, Sips, and Khan models. The best fit to the Pb(II) and Ni(II) biosorption results was obtained by Langmuir model with maximum uptake capacities of 44.67 and 29.17 mg/g for these two ions, respectively, whereas for Cu(II), the corresponding value was 31.65 mg/g obtained with Khan model. The kinetic study demonstrated that the optimum agitation speed was 400 rpm, at which the best removal efficiency and/or minimum surface mass transfer resistance (MSMTR) was achieved. A pseudo-second-order rate kinetic model gave the best fit to the experimental data (R² = 0.99), resulting in MSMTR values of 4.69× 10^?5, 4.45× 10^?6, and 1.12× 10^?6 m/s for Pb(II), Cu(II), and Ni(II), respectively. The thermodynamic study showed that the biosorption process was spontaneous and exothermic in nature.     

SORPTION OF PLUTONIUM-237 BY TWO SPECIES OF MARINE PHYTOPLANKTON11

The adsorption of plutonium-237, added from an acid solution, by two species of marine phytoplankton, Monochrysis lutheri Droop, a flagellated chrysomonad, and Phaeodactylum tricornutum Bohlin, a diatom, is governed by a passive mechanism. This is clearly indicated by the observation that the rapid rates of sorption were not significantly different for live and heat-killed cells incubated at 24°C and 0°C. The Q₁₀ values for the chrysomonad and the diatom of 0.95 and 1.18, respectively, are indicative of passive processes. The average ratio of (activity on algae/activity in filtrate) per unit volume at 24 h, the time when maximum levels of algal radioactivity were attained, of (32 ± 4) × 10³ was not significantly different for the diatom or the chrysomonad. On a per cell basis, maximum levels of radioactivity were attained within 2 h. Less than 20% of the adsorbed ²³⁷Pu desorbed after 24 h.     

沉水植物菹草在低温条件下对重金属Cu、Pb、Zn的吸附和富集

在10℃的较低温度条件下,研究了冬春季节生长旺盛的沉水植物菹草(Potamogeton crispus L.)对重金属离子Cu²⁺,Pb²⁺,Zn²⁺的生物吸附特征及解吸情况,对不同初始浓度重金属水体中的重金属离子去除率情况,以及在此过程中菹草各器官(叶、茎、根茎、根)对重金属离子的富集情况。结果表明,菹草对Cu²⁺,Zn²⁺的吸附在20 min内达到平衡,对Pb²⁺的吸附在50 min内达到平衡,吸附动力学结果符合伪二级动力学方程,决定系数分别达1,1,0.997 8。Freundlich等温线可较好地拟合菹草吸附Cu²⁺,Pb²⁺,Zn²⁺的过程,Cu²⁺,Pb²⁺,Zn²⁺的吸附容量分别达到66.900 6,26.543 0,30.371 8 mg·L^-1。以去离子水作洗脱剂,解吸液中3种重金属离子浓度均低于仪器检出限(0.01 mg·L^-1),解吸程度微弱。投放菹草后,随着初始处理浓度的升高,水体Cu²⁺的去除率先降低后升高,Pb²⁺的去除率的变化趋势与Cu²⁺类似。Zn²⁺去除率则随水体Zn²⁺初始浓度的升高而逐渐升高。菹草各器官对水体3种重金属离子的富集能力不同,排序为Cu²⁺＞Zn²⁺＞Pb²⁺。不同器官对同一种重金属离子的富集量差异显著,叶是富集重金属离子的主要器官。水体重金属离子的初始浓度会影响菹草各器官富集重金属离子的能力,一般随水体重金属初始浓度升高,菹草各器官的重金属离子富集量虽有不同程度的增加但富集系数持续减小。     

Sorption Behavior of Cesium in Two Greek Soils: Effects of Cs Initial Concentration,Clay Mineralogy,and Particle-size Fraction

The characteristics of Cs sorption behavior in two soils (soil 1 and soil 2) with nearly the same clay content and exhangeable K concentration, but with different clay mineralogy, were studied by the quantification of the distribution coefficient (k_d). It was observed that as the initial Cs concentration increased from 4 to 50 mg L^?1, the k_d values decreased in both soils, suggesting a progressive saturation of Cs available sorption sites. However, the presence of expansible 2:1 phyllosilicates minerals in the clay fraction of soil 2 maintained a high Cs sorption ability for this soil, even at high Cs concentrations. The experimental data were also fitted to the Freundlich isotherm and the results showed that parameters of the Freundlich equation could be used to estimate the degree of Cs sorption and the nature of the available sorption sites. For the studied soils, the k_f and the k_d values followed a similar trend and the n Freundlich constant values provided a reliable indicator for the soils’ clay mineralogy. The removal of the sand fraction enhanced Cs sorption in both soils and the absence of sorbed Cs ions on the quartz minerals, as observed by the SEM analysis, additionally supported the effect of particle-size fraction on Cs sorption.     

Manganese(II) adsorption and oxidation by whole cells and a membrane fraction of Pedomicrobium sp. ACM 3067

Heat treatment of Pedomicrobium sp. ACM 3067 enhanced the adsorption of Mn(II) to whole cells but abolished Mn(II)-oxidising activity. In whole cells, optimal Mn(II)-oxidising activity occurred at pH 7 and 25 °C. The apparent K _m of the Mn(II)-oxidising system for Mn(II) was 26 μM. These data confirm that Mn(II) oxidation is an enzymic process in Pedomicrobium sp. ACM 3067. Measurement of Mn(II) oxidation during the growth cycle demonstrated that the highest activity occurred during early- to mid-exponential phase and was independent of the presence of Mn in the growth medium. Mn(II)-oxidising activity was localised to the membrane fraction. Transmission electron microscopy showed that this fraction consisted of double-layered membrane vesicles. Positively charged molecules such as poly-l-lysine interfered with the adsorption and oxidation of Mn(II) by whole cells and membranes. Similarly, aminoglycoside antibiotics such as gentamicin sulfate proved to be potent inhibitors of Mn(II) oxidation. Treatment of cells with the copper chelator diethyldithiocarbamate inhibited Mn(II) oxidation. Enzyme activity was restored by the addition of Cu(II) ions, but not by Co(II) nor Zn(II). We conclude that Mn(II) oxidation in Pedomicrobium sp. ACM 3067 is catalysed by a Cu-dependent enzyme. Received: 14 September 1998 / Accepted: 4 January 1999     

Kinetics of adsorption, desorption, and re-adsorption of a commercial endoglucanase in lignocellulosic suspensions

This study conducted quantitative kinetic modeling and in situ and temporally resolved measurements of adsorption, desorption, and re-adsorption of a commercial endoglucanase in lignocellulosic suspensions. The study defined a cellulase adsorption and desorption competition parameter, a pseudo rate of binding and desorption, binding and desorption capacity, as well as cellulase-binding reversibility (a thermodynamic property) and recyclability (a engineering parameter). The results indicate that both substrate chemical and physical structures play important roles in cellulase binding and desorption. Binding of a commercial cellulase onto a cellulosic substrate was reversible. Bindings to two different lignocellulosic substrates were almost irreversible. While lignin and its structure positively affect binding capacity to substrate, they negatively affect cellulase recyclability. Collapsing of substrate pores reduced cellulose accessibility and cellulase-binding capacity and increased reversibility and recyclability. Increasing temperature and pH increase cellulase desorption and increased binding reversibility and capacity. This study lays the foundation for developing effective cellulase recycling strategies.     

Phosphorus in soil,water and sediment: an overview

The geochemistry, availability and abundance of different forms of phosphorus in soil, water and sediments are reviewed. The present knowledge of phosphorus pathways in ecosystems and their regulation is discussed.In a drainage basin, anthropogenic phosphorus is brought into the system mainly as fertilizers and detergents. Sewer systems and outwash processes transfer the phosphorus from the terrestrial environment to the aquatic part of the ecosystem where an accumulation occurs in the sediments of the watercourse.A great part of the phosphates in soil is sorbed to soil particles or incorporated into soil organic matter. The release and export of phosphorus from uncultivated soil is a function of the geology and soil composition, but also of the air temperature, precipitation and the hydrological condition, pH etc.The solubility of phosphates is controlled by either sorption-desorption or precipitation-dissolution reactions depending on the environment in the soil or sediments. In soil and sediments with large amounts of iron and aluminium hydrous oxides, sorption-desorption reactions are largely responsible for determining the level of orthophosphate in the solution at equilibrium.Algal availability of phosphorus associated with soil-derived materials present in aquatic systems deserves more research. In addition, processes responsible for transport of phosphorus from cropland to aquatic systems and chemical and microbial transformations of phosphorus in lakes and streams deserve more attention.     

Lipase adsorption on woven nylon-6 membrane: Optimization,kinetic and thermodynamic analyses

Abstract

Candida rugosa lipase was immobilized on the activated nylon-6 membrane using 0.5% glutaraldehyde as cross-linking agent. The immobilized lipase had an improved temperature and pH stability and exhibited good reusability. The adsorption process followed pseudo-second order rate equation and the biosorption isotherms correlated well with the Langmuir isotherm model. Negative ΔG indicated the adsorption process was spontaneous and the positive ΔH indicated that the adsorption was endothermic. The standard entropy ΔS value was also positive, which suggested an increase in the freedom of the system.     

Protein adsorption on core-shell resins for flow-through purifications: Effect of protein molecular size,shape, and salt concentration

This work addresses the functional properties of the core-shell resins Capto Core 400 and 700 for a broad range of proteins spanning 66.5 to 660 kDa in molecular mass, including bovine serum albumin (BSA) in monomer and dimer form, fibronectin, thyroglobulin, and BSA conjugates with 10 and 30 kDa poly(ethylene glycol) chains. Negatively charged latex nanoparticles (NPs) with nominal diameters of 20, 40, and 100 nm are also studied as surrogates for bioparticles. Protein binding and its trends with respect to salt concentration depend on the protein size and are different for the two agarose-based multimodal resins. For the smaller proteins, the amount of protein bound over practical time scales is limited by the resin surface area and is larger for Capto Core 400 compared with Capto Core 700. For the larger proteins, diffusion is severely restricted in Capto Core 400, resulting in lower binding capacities than those observed for Capto Core 700 despite the larger surface area. Adding 500 mM NaCl reduces the local bound protein concentration and diffusional hindrance resulting in higher binding capacities for the large proteins in Capto Core 400 compared with low ionic strength conditions. The NPs are essentially completely excluded from the Capto Core 400 pores. However, 20 and 40 nm NPs bind significantly to Capto Core 700, further hindering protein diffusion. A model is provided to predict the dynamic binding capacities as a function of residence time.     

Copper Sorption Behavior of Selected Soils of the Oasis in the Middle Reaches of Heihe River Basin,China

The mobility and bioavailability of copper (Cu) depends on the Cu sorption capacity of soil and also on the chemical form of Cu in soils. Laboratory batch experiments were carried out to study the sorption and distribution of Cu in nine soils differing in their physicochemical properties from the oasis in the middle reaches of Heihe river basin, China: desert soil (S-1), agricultural soils (S-2, S-3, S-8, and S-9), marshland soil (S-4), and hungriness shrub soils (S-5 and S-6). Copper sorption behavior was studied using the sorption isotherm and sequential extraction procedure. In general, the sorption capacity for Cu decreased in the order: S-4 > S-9 > S-2 > S-8 > S-3 > S-6 > S-5 > S-7 > S-1. The correlation results suggest that soils with higher CEC, silt, clay, CaCO3, and organic matter will retain Cu more strongly and in greater amounts than soils that are sandy with lower CEC, CaCO3, and organic matter. pH is not an important impact factor to Cu sorption in experimental soil samples because pH in soils used in this study had a narrow range. The distribution of sorbed Cu varied between nine soils studied and depended on both soil properties and initial added Cu concentration. There are significant differences in the distribution of Cu in each soil with the increase of initial Cu concentration. The predominance of Cu associated with the available fraction, which was over 50% of the total sorbed Cu in most cases, indicates that the change of geochemical conditions might promote the release of Cu back into soil solution thus impacting organisms in the soils. The added Cu has also the tendencies to locate in the residual fraction, which was larger than 5% of the total amount extracted from the four fractions in most soils.     

Sphingopyxis sp. YF1吸附镉的特性及其机制

【背景】水中的重金属污染是一个严峻的环境问题,严重危害人体健康,利用微生物吸附剂修复重金属污染的水体是一种高效环保的方法。Sphingopyxis能够去除重金属,但是其去除水体中镉的研究很少,且其吸附镉的机理尚不清楚。【目的】以从水体中分离的Sphingopyxis sp. YF1为对象,探究该菌对镉的吸附特性和机制。【方法】分析在不同pH、接触时间及重金属初始浓度条件下YF1活菌和死菌对Cd²⁺的吸附效果,对其进行动力学模型和等温模型拟合,通过扫描电镜和能谱(scanning electron microscopy and energy dispersive X-ray spectroscopy, SEM-EDS)观察镉在活菌和死菌细胞表面的富集,并通过傅里叶变换红外光谱(Fourier transform infrared spectroscopy, FTIR)和X射线光电子能谱(X-ray photoelectron spectroscopy, XPS)分析确定YF1菌中参与吸附Cd²⁺的官能团,阐明YF1对镉的吸附机理。【结果】当pH值为3.0-5.0时,随着pH值的升高,活菌与死菌的镉吸附量都随着增加,pH值为5.0-7.0时,活菌与死菌的镉吸附量均无较大变化,吸附主要发生在前10 min,之后吸附速率逐渐降低,活菌和死菌吸附Cd²⁺的过程更符合准二级动力学模型,表明菌体对镉主要是以化学吸附的方式进行;活菌和死菌等温模型拟合都更符合Langmuir模型,说明YF1对Cd²⁺的吸附为均相吸附;活菌和死菌对Cd²⁺的吸附量分别达到36.20 mg/g和62.98 mg/g;吸附后的活菌和死菌的细胞表面均有Cd(II)沉积在菌体表面,活菌和死菌的-OH、C-(O,N)和-NO₂等基团参与了镉的吸附。【结论】Sphingopyxis sp. YF1菌具有较强的Cd²⁺去除能力,该菌株在去除水体Cd²⁺方面具有良好的应用前景。     

Plant seed extract assisted,eco-synthesized C-ZnO nanoparticles: Characterization,chromium(VI) ion adsorption and kinetic studies

This report attempts to elucidate the potential of plant seed extract assisted synthesis of graphite-based zinc oxide nanoparticles (C-ZnO NPs) towards removal of chromium(VI) ions from water samples. The graphite-based zinc oxide (C-ZnO) composites were characterized using thermogravimetric analysis (TGA), X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). The C-ZnO nanocomposites have found to remove chromium from the sample through an adsorption process. The sensitivity of chromium removal through adsorption is found to be in the range of 40 to 240 mg. The adsorption behaviour was found to be fitting with Langmuir isotherm model and the adsorption reaction follows pseudo second-order kinetics.     

Study on the Adsorption of Cr3+ by Peanut Shell: Adsorption Kinetics,Thermodynamics, and Isotherm Properties

The pollution of heavy metals in soil to the environment is becoming more and more serious, resulting in the reduction of crop production and the occurrence of medical accidents. In order to remove heavy metal ions from soil and reduce the harm of heavy metals to the environment, modified peanut shell was used to adsorb Cr³⁺ in this article. The effects of different adsorption conditions on the adsorption rate and adsorption capacity of Cr³⁺ on ZnCl₂ modified peanut shell were studied, the best adsorption conditions were explored, and the relationship of kinetics, thermodynamics and adsorption isotherm properties of adsorption process were explored. The results showed that the optimum adsorption pH value, dosage, initial concentration, adsorption temperature and contact time of ZnCl₂ modified peanut shell were 2.5, 2.5 g/L, 75 μg/mL, 25 °C and 40 min, respectively. The prepared materials were characterized and analyzed by scanning electron microscope (SEM) and X-ray diffraction (XRD) analyzer. It was concluded that the modified peanut shell had a good adsorption capacity to Cr³⁺. The kinetic study showed that the adsorption process of Cr³⁺ on peanut shell modified by zinc chloride was in accordance with the quasi-second-order kinetic model. The adsorption process belonged to exothermic reaction and belonged to spontaneous reaction process. In summary, it is proved that zinc chloride modified peanut shell can efficiently adsorb Cr³⁺, which can be used for the treatment of heavy metal wastes in industry, which is beneficial to environmental protection and avoid heavy metal pollution.