Cloning,Expression and Purification of <Emphasis Type="Italic">Microcystis viridis</Emphasis> Lectin in <Emphasis Type="Italic">Escherichia coli</Emphasis>

Microcystis viridis lectin (MVL), a sugar-binding protein originally isolated from freshwater blue-green algae Microcystis viridis, has been reported to have potent anti-HIV activity. In this paper, we described the expression and purification of recombinant-MVL (R-MVL) gene in E. coli. The results demonstrated that the R-MVL in shake flask cultures was primarily expressed either in the form of inclusion bodies at 37°C or in the soluble fraction at 23 °C. Secondly, a one-step purification based on nickel-affinity chromatography was employed and 15 mg of highly purified (>95%) R-MVL from 1 l of cell cultures was yielded. The purified R-MVL was then subjected to MALDI-TOF–MS analysis for protein identification. In conclusion, for the first time, the R-MVL was successfully cloned and expressed in E. coli, which is useful for further study and large-scale cost-effective production of MVL protein.     

Enhanced Soluble Expression of a Thermostable Cellulase from <Emphasis Type="Italic">Clostridium thermocellum</Emphasis> in <Emphasis Type="Italic">Escherichia coli</Emphasis>

In this study, the cellulase gene celD from Clostridium thermocellum was cloned into expression vectors pET-20b(+) and pHsh. While high expression can be achieved by means of both these expression systems, only the pHsh expression system gives soluble proteins. By weakening the mRNA secondary structure and replacing the rare codons for the N-terminal amino acids of the target protein, the expression level of CelD was increased from 4.1 ± 0.3 to 6.4 ± 0.4 U ml⁻¹ in LB medium. Recombinant CelD was purified by heat treatment followed by Ni–NTA affinity. The purified CelD exhibited the highest activity at pH 5.4 and 60°C, and retained more than 50% activity after incubation at 70°C for 1 h. The cellulase activity of CelD was significantly enhanced by Ca²⁺ but inhibited by EDTA. The favorable properties of CelD offer the potential for genetic modification of strains for biomass degradation. Presently, one of the major bottlenecks for industrial cellulase users is the high cost of enzyme production. The high level expression of soluble enzymes from the pHsh expression system offers a novel approach for the production of cellulases to be used in various agro-industrial processes such as chemical, food and textile.     

High-level expression of the xylanase from <Emphasis Type="Italic">Thermomyces lanuginosus</Emphasis> in <Emphasis Type="Italic">Escherichia coli</Emphasis>

According to the amino acid sequence, a codon-optimized xylanase gene (xynA1) from Thermomyces lanuginosus DSM 5826 was synthesized to construct the expression vector pHsh-xynA1. After optimization of the mRNA secondary structure in the translational initiation region of pHsh-xynA1, free energy of the 70 nt was changed from −6.56 to −4.96 cal/mol, and the spacing between AUG and the Shine-Dalgarno sequence was decreased from 15 to 8 nt. The expression level was increased from 1.3 to 13% of total cell protein. A maximum xylanase activity of 47.1 U/mL was obtained from cellular extract. The recombinant enzyme was purified 21.5-fold from the cellular extract of Escherichia coli by heat treatment, DEAE-Sepharose FF column and t-Butyl-HIC column. The optimal temperature and pH were 65 °C and pH 6.0, respectively. The purified enzyme was stable for 30 min over the pH range of 5.0–8.0 at 60 °C, and had a half-life of 3 h at 65 °C.     

Benzyladenine Promotes Flowering in <Emphasis Type="Italic">Doritaenopsis</Emphasis> and <Emphasis Type="Italic">Phalaenopsis</Emphasis> Orchids

Two experiments were performed to determine how application of the cytokinin benzyladenine (BA) influenced flowering in Doritaenopsis and Phalaenopsis orchid clones. In the first experiment, two vegetative orchid clones growing in 15-cm pots were transferred from a 28°C greenhouse that inhibited flowering to a 23°C greenhouse for flower induction (day 0). A foliar spray (0.2 L m⁻²) containing BA at 100, 200, or 400 mg L⁻¹ or 25, 50, or 100 mg L⁻¹ each of BA and gibberellins A₄ + A₇ (BA+GA) was applied on days 0, 7, and 14. Plants treated with BA alone at 200 or 400 mg L⁻¹ had a visible inflorescence 3–9 days earlier and had a mean of 0.7–3.5 more inflorescences and 3–8 more flowers per plant than nontreated plants. The application of BA+GA had no effect on inflorescence number and total flower number at the rates tested. In the second experiment, three orchid clones received a single foliar spray of BA at 200 mg L⁻¹ at six time points relative to time of transfer from 29°C to 23°C (−1, 0, +1, +2, +4, or +6 weeks). A separate group of plants received a BA application at week 0 but was maintained at 29°C. Inflorescence number was greatest in all three orchid clones when plants were treated with BA 1 week after the temperature transfer. Plants that were sprayed with BA and maintained at 29°C did not initiate inflorescences. The promotion of flowering by the application of BA suggests that cytokinins at least partially regulate inflorescence initiation of Doritaenopsis and Phalaenopsis, but its promotion is conditional and BA application cannot completely substitute for an inductive low temperature.     

Biochemical characterization of the carotenoid 1,2-hydratases (CrtC) from <Emphasis Type="Italic">Rubrivivax gelatinosus</Emphasis> and <Emphasis Type="Italic">Thiocapsa roseopersicina</Emphasis>

Two carotenoid 1,2-hydratase (CrtC) genes from the photosynthetic bacteria Rubrivivax gelatinosus and Thiocapsa roseopersicina were cloned and expressed in Escherichia coli in an active form and purified by affinity chromatography. The biochemical properties of the recombinant enzymes and their substrate specificities were studied. The purified CrtCs catalyze cofactor independently the conversion of lycopene to 1-HO- and 1,1′-(HO)₂-lycopene. The optimal pH and temperature for hydratase activity was 8.0 and 30°C, respectively. The apparent K _m and V _max values obtained for the hydration of lycopene were 24 μM and 0.31 nmol h⁻¹ mg⁻¹ for RgCrtC and 9.5 μM and 0.15 nmol h⁻¹ mg⁻¹ for TrCrtC, respectively. Sodium dodecyl sulfate polyacrylamide gel electrophoresis analysis revealed two protein bands of 44 and 38 kDa for TrCrtC, which indicate protein processing. Both hydratases are also able to convert the unnatural substrate geranylgeraniol (C20 substrate), which functionally resembles the natural substrate lycopene.     

Antifreeze proteins in the Antarctic springtail, <Emphasis Type="Italic">Gressittacantha terranova</Emphasis>

Antarctic springtails are exemplars of extreme low temperature adaptation in terrestrial arthropods. This paper represents the first examination of such adaptation in the springtail, Gressittacantha terranova. Acclimatization state was measured in field-fresh samples over a 22-day period at the beginning of the austral summer. No evidence of temperature tracking was observed. Mean temperature of crystallization (T _c) for all samples was −20.67 ± 0.32°C and the lowest T _c recorded was −32.62°C. Ice affinity purification was used to collect antifreeze proteins (AFPs) from springtail homogenate. The purified ice fraction demonstrated both thermal hysteresis activity and recrystallisation inhibition. Growth-melt observations revealed that ice crystals grow normal to the c-axis (basal plane). Reverse-phased HPLC produce one clearly resolved peak (P1) and one compound peak (P2). Mass spectrometry identified the molecular mass of P1 as 8,599 Da. The P1 protein was also the most prominent in P2, although additional peptides of 6–7 KDa were also prominent. The main AFP of the Antarctic springtail, G. terranova has been isolated, although like other AFP-expressing arthropods, it shows evidence of expressing a family of AFPs.     

High-level expression of the <Emphasis Type="Italic">Penicillium notatum</Emphasis> glucose oxidase gene in <Emphasis Type="Italic">Pichia pastoris</Emphasis> using codon optimization

The glucose oxidase (GOD) gene from Penicillium notatum was expressed in Pichia pastoris. The 1,815 bp gene, god-w, encodes 604 amino acids. Recombinant GOD-w had optimal activity at 35–40°C and pH 6.2 and was stable, from pH 3 to 7 maintaining >75% maximum activity after incubation at 50°C for 1 h. GOD-w worked as well as commercial GODs to improve bread making. To achieve high-level expression of recombinant GOD in P. pastoris, 272 nucleotides involving 228 residues were mutated, consistent with the codon bias of P. pastoris. The optimized recombinant GOD-m yielded 615 U ml⁻¹ (2.5 g protein l⁻¹) in a 3 l fermentor—410% higher than GOD-w (148 U ml⁻¹), and thus is a low-cost alternative for the bread baking industry.     

Construction,expression and characterization of fusion enzyme from <Emphasis Type="Italic">Arthrobacter oxydans</Emphasis> dextranase and <Emphasis Type="Italic">Klebsiella pneumoniae</Emphasis> amylase

An artificial fusion protein of Arthrobacter oxydans dextranase and Klebsiella pneumoniae α-amylase was constructed and expressed in Escherichia coli. Most of the expressed protein existed as an insoluble fraction, which was solubilized with urea. The purified fusion enzyme electrophoretically migrated as a single protein band; M = 137 kDa, and exhibited activities of both dextranase (10.8 U mg⁻¹) and amylase (7.1 U mg⁻¹), which were lower than that of reference dextranase (13.3 U mg⁻¹) and α-amylase (103 U mg⁻¹). The fusion enzyme displayed bifunctional enzyme activity at pH 5–7 at 37°C. These attributes potentially make the fusion enzyme more convenient for use in sugar processing than a two-enzyme system.     

Molecular cloning,expression in <Emphasis Type="Italic">Escherichia</Emphasis><Emphasis Type="Italic">coli</Emphasis> of Attacin A gene from <Emphasis Type="Italic">Drosophila</Emphasis> and detection of biological activity

Attacin, a 20 kDa antibacterial peptide, plays an important role in immunity. To understand this gene better, gene cloning, expression and biological activity detection of Attacin A was carried out in present study. The full-length open reading frame (ORF) coding for Attacin A gene was generated using RT-PCR which takes total RNA extracted from Drosophila as the template. The gene was inserted directionally into the prokaryotic expression vector pET-32a (+). The resulting recombinant plasmid was transformed into E. coli Rosetta. SDS–PAGE was carried out to detect the expression product which was induced by IPTG. The antimicrobial activity and hemolysis activity were tested in vitro after purification. Agarose gel electrophoresis indicated that the complete ORF of Attacin A gene has been cloned successfully from Drosophila stimulated by E. coli which includes 666 bp and encodes 221 AA. The gene encoding mature Attacin A protein was amplified by PCR from the recombinant plasmid containing Attacin A, which includes 570 bp in all. SDS–PAGE analysis demonstrated that the fusion protein expressed was approximately 39.2 kDa. Biological activities detection showed that this peptide exhibited certain antibacterial activity to several G− bacteria, as well as minor hemolysis activity for porcine red blood cells. In conclusion, Attacin A gene was cloned and expressed successfully. It was the basis for further study of Attacin.     

A Novel Phytase appA from <Emphasis Type="Italic">Citrobacter amalonaticus</Emphasis> CGMCC 1696: Gene Cloning and Overexpression in <Emphasis Type="Italic">Pichia pastoris</Emphasis>

A novel phytase gene appA, with upstream and downstream sequences from Citrobacter amalonaticus CGMCC 1696, was cloned by degenerate polymerase chain reaction (PCR), and thermal asymmetric interlaced (TAIL) PCR and was overexpressed in Pichia pastoris. Sequence analysis revealed one open reading frame that consisted of 1311 bp encoding a 436–amino-acid protein, which had a deduced molecular mass of 46.3 kDa. The phytase appA belongs to the histidine acid phosphatase family and exhibits the highest identity (70.1%) with C. braakii phytase. The gene was overexpressed in P. pastoris. The secretion yield of recombinant appA protein was accumulated to approximately 4.2 mg·mL⁻¹, and the enzyme activity level reached 15,000 U·mL⁻¹, which is higher than any previous reports. r-appA was glycosylated, as shown by Endo H treatment. r-appA was purified and characterized. The specific activity of r-appA for sodium phytate was 3548 U·mg⁻¹. The optimum pH and temperature for enzyme activity were 4.5 and 55°C, respectively. r-appA was highly resistant to pepsin or trypsin treatment. This enzyme could be an economic and efficient alternative to the phytases currently used in the feed industry.     

The ATPase activity of the <Emphasis Type="Italic">G2alt</Emphasis> gene encoding an aluminium tolerance protein from <Emphasis Type="Italic">Anoxybacillus gonensis</Emphasis> G2

The G2ALT gene was cloned and sequenced from the thermophilic bacterium Anoxybacillus gonensis G2. The gene is 666 bp long and encodes a protein 221 amino acids in length. The gene was overexpressed in E. coli and purified to homogeneity and biochemically characterized. The enzyme has a molecular mass of 24.5 kDa and it could be classified as a member of the family of bacterial aluminium resistance proteins based on homology searches. When this fragment was expressed in E. coli, it endowed E. coli with Al tolerance to 500 μM. The purified G2ALT protein is active at a broad pH range (pH 4.0–10.0) and temperature range (25°C–80°C) with optima of 6.0 and the apparent optimal temperature of 73°C respectively. Under optimal conditions, G2ALT exhibited a low ATPase activity with K _m ⁻ and V _max ⁻ values of 10±0.55 μM and 26.81±0.13 mg Pi released/min/mg enzyme, respectively. The ATPase activity of G2ALT requires Mg²⁺ and Na⁺ ions, while Zn²⁺ and Al³⁺ stimulate the activity. Cd²⁺ and Ag⁺ reduced the activity and Li⁺, Cu²⁺, and Co²⁺ inhibited the activity. Known inhibitors of most ATPases, like such as β-mercaptoethanol and ouabain, also inhibited the activity of the G2ALT. These biochemical characterizations suggested that G2ALT belongs to the PP-loop ATPase superfamily and it can be responsible for aluminium tolerance in A. gonensis G2.     

Characterization of <Emphasis Type="SmallCaps">d</Emphasis>-tagatose-3-epimerase from <Emphasis Type="Italic">Rhodobacter sphaeroides</Emphasis> that converts <Emphasis Type="SmallCaps">d</Emphasis>-fructose into <Emphasis Type="SmallCaps">d-</Emphasis>psicose

A non-characterized gene, previously proposed as the d-tagatose-3-epimerase gene from Rhodobacter sphaeroides, was cloned and expressed in Escherichia coli. Its molecular mass was estimated to be 64 kDa with two identical subunits. The enzyme specificity was highest with d-fructose and decreased for other substrates in the order: d-tagatose, d-psicose, d-ribulose, d-xylulose and d-sorbose. Its activity was maximal at pH 9 and 40°C while being enhanced by Mn²⁺. At pH 9 and 40°C, 118 g d-psicose l⁻¹ was produced from 700 g d-fructose l⁻¹ after 3 h. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Effects of light and temperature on the attachment and development of <Emphasis Type="BoldItalic">Gloiopeltis tenax</Emphasis> and <Emphasis Type="BoldItalic">Gloiopeltis furcata</Emphasis> tetraspores

Two 60-day experiments were conducted to study the influence of photon flux density (PFD) and temperature on the attachment and development of Gloiopeltis tenax and Gloiopeltis furcata tetraspores. In the first experiment, tetraspores of the two Gloiopeltis species were incubated at five temperature ranges (8°C, 12°C, 16°C, 20°C, 24°C) under a constant PFD of 80 μmol photons m⁻² s⁻¹ with a photoperiod of 12:12. In a second experiment, tetraspores were incubated under five PFD gradients (30, 55, 80, 105, 130 μmol photons m⁻² s⁻¹) at a constant temperature of 16°C with a photoperiod of 12:12. Maximum density of attached tetraspores was observed at 16°C for both species. Maximum per cent of spore germinating into disc was recorded at 12–16°C for G. tenax and 8–12°C for G. furcata. Maximum per cent of discs producing erect axes for G. tenax and G. furcata were recorded at 24°C and 20°C, respectively. Light had no significant effect on tetraspore attachment and developing into disc, but it affected the growth, sprouting and survival of its discs. Under 30–55 μmol photons m⁻² s⁻¹, the discs of the two species of Gloiopeltis did not form thallus until the end of the experiment. Optimum PFD range for G. tenax discs was 80–105 μmol photons m⁻² s⁻¹, whilst it was 80–130 μmol photons m⁻² s⁻¹ for G. furcata. Results presented in this study are expected to assist the progress of artificial seeding of Gloiopeltis.     

Cloning and expression of <Emphasis Type="Italic">Tenebrio molitor</Emphasis> antifreeze protein in <Emphasis Type="Italic">Escherichia coli</Emphasis>

A novel antifreeze protein cDNA was cloned by RT-PCR from the larva of the yellow mealworm Tenebrio molitor. The coding fragment of 339 bp encodes a protein of 112 amino acid residues and was fused to the expression vectors pET32a and pTWIN1. The resulted expression plasmids were transformed into Escherischia coli strains BL21 (DE3), ER2566, and Origami B (DE3), respectively. Several strategies were used for expression of the highly disulfide-bonded β-helix-contained protein with the activity of antifreeze in different expression systems. A protocol for production of refolded and active T. molitor antifreeze protein in bacteria was obtained.     

Cloning and characterization of a novel <Emphasis Type="SmallCaps">l</Emphasis>-arabinose isomerase from <Emphasis Type="Italic">Bacillus licheniformis</Emphasis>

Based on analysis of the genome sequence of Bacillus licheniformis ATCC 14580, an isomerase-encoding gene (araA) was proposed as an l-arabinose isomerase (L-AI). The identified araA gene was cloned from B. licheniformis and overexpressed in Escherichia coli. DNA sequence analysis revealed an open reading frame of 1,422 bp, capable of encoding a polypeptide of 474 amino acid residues with a calculated isoelectric point of pH 4.8 and a molecular mass of 53,500 Da. The gene was overexpressed in E. coli, and the protein was purified as an active soluble form using Ni–NTA chromatography. The molecular mass of the purified enzyme was estimated to be ~53 kDa by sodium dodecyl sulfate–polyacrylamide gel electrophoresis and 113 kDa by gel filtration chromatography, suggesting that the enzyme is a homodimer. The enzyme required a divalent metal ion, either Mn²⁺or Co²⁺, for enzymatic activity. The enzyme had an optimal pH and temperature of 7.5 and 50°C, respectively, with a k _cat of 12,455 min⁻¹ and a k _cat/K _m of 34 min⁻¹ mM⁻¹ for l-arabinose, respectively. Although L-AIs have been characterized from several other sources, B. licheniformis L-AI is distinguished from other L-AIs by its wide pH range, high substrate specificity, and catalytic efficiency for l-arabinose, making B. licheniformis L-AI the ideal choice for industrial applications, including enzymatic synthesis of l-ribulose. This work describes one of the most catalytically efficient L-AIs characterized thus far.     

Molecular cloning,sequence analysis,expression and characterization of the endochitinase gene from <Emphasis Type="Italic">Trichoderma</Emphasis> sp. in <Emphasis Type="Italic">Escherichia coli</Emphasis> BL21

The endochitinase DNA and cDNA from Trichoderma sp. were cloned, sequenced and expressed. The cloned DNA and cDNA sequences were 1,476 and 1,275 bp in length, respectively. There were three introns in DNA sequence in comparison with the cDNA sequence. The endochitinase protein contained three regions: the signal peptide, the prepro-region and the mature protein region. The gene fragment encoding the mature endochitinase was ligated into the expression vector pET-28a+, yielding pET-1. The plasmid pET-1 was transformed into the Escherichia coli BL21 (DE3). The clone bearing pET-1 was picked and cultured at 30°C for the expression of endochitinase. SDS-PAGE analysis showed that the endochitinase was expressed in the periplasmic space and the purified protein showed a single band. The activity of 70.2 U/mg was obtained from the cellular extract of the recombinant strain. The activity of endochitinase was 2.5-fold higher at 24 h than at 16 h in the periplasmic space. The optimal pH and temperature of the recombinant endochitinase were determined to be 7.0 and 35°C, respectively. It was relatively stable within the pH range of 5–8. Significant activity stimulation by 1 mM Mg²⁺ and 5 mM Fe²⁺ and inhibition by 5 mM Co²⁺ and 5 mM Hg²⁺ were observed. The kinetic constants K_m, V_max and K_cat for the hydrolysis of the colloidal chitin were 1.5 mM, 1.37 μmol min⁻¹ and 6.23 min⁻¹, respectively.     

Enhanced production of recombinant galactose oxidase from <Emphasis Type="Italic">Fusarium graminearum</Emphasis> in <Emphasis Type="Italic">E. coli</Emphasis>

The gene gaoA encoding the copper-dependent enzyme galactose oxidase (GAO) from Fusarium graminearum PH-1 was cloned and successfully overexpressed in E. coli. Culture conditions for cultivations in shaken flasks were optimized, and optimal conditions were found to be double-strength LB medium, 0.5% lactose as inducer, and induction at the reduced temperature of 25°C. When using these cultivation conditions ~24 mg of active GAO could be produced in shaken flasks per litre medium. Addition of copper to the fermentation medium decreased the enzyme production significantly. The His-tagged recombinant enzyme could be purified conveniently with a single affinity chromatography step. The purified enzyme showed a single band on SDS–PAGE with an apparent molecular mass of 66 kDa and had kinetic properties similar to those of the fungal wild-type enzyme.