Synthesis and structural characterization of silk-like materials incorporated with an elastic motif

Genetic engineering strategies were applied to synthesize silk-like materials, [(GVPGV)(2)GG(GAGAGS)(3)AS](n). The primary structure of these materials represents the repetitive crystalline region of Bombyx mori silk fibroins incorporated with an elastic motif selected from animal elastin. The oligonucleotides were designed to encode the desired recombinant proteins and then expressed in the Escherichi coli system. The expression and purification conditions for the production of the recombinant proteins were optimized. (13)C CP/MAS NMR was used for structural characterization in the solid state, where the isotope labeling was performed using a modified M9 medium. The secondary structures of these materials are primarily governed by the designated amino acid sequence, where the B. mori silk fibroin block, (GAGAGS)(3), tends to form the crystalline region, which is interrupted by the flexible (GVPGV)(2) block. The CD data suggested that the structure of these materials was length-dependent in the solution state, i.e., a higher molecule weight leads to a higher ordered structure.     

Conformational transitions in model silk peptides

Protein structural transitions and beta-sheet formation are a common problem both in vivo and in vitro and are of critical relevance in disparate areas such as protein processing and beta-amyloid and prion behavior. Silks provide a "databank" of well-characterized polymorphic sequences, acting as a window onto structural transitions. Peptides with conformationally polymorphic silk-like sequences, expected to exhibit an intractable beta-sheet form, were characterized using Fourier transform infrared spectroscopy, circular dichroism, and electron diffraction. Polymorphs resembling the silk I, silk II (beta-sheet), and silk III (threefold polyglycine II-like helix) crystal structures were identified for the peptide fibroin C (GAGAGS repetitive sequence). Two peptides based on silk amorphous sequences, fibroin A (GAGAGY) and fibroin V (GDVGGAGATGGS), crystallized as silk I under most conditions. Methanol treatment of fibroin A resulted in a gradual transition from silk I to silk II, with an intermediate state involving a high proportion of beta-turns. Attenuated total reflectance Fourier transform infrared spectroscopy has been used to observe conformational changes as the peptides adsorb from solution onto a hydrophobic surface. Fibroin C has a beta-strand structure in solution but adopts a silk I-like structure upon adsorption, which when dried on the ZnSe crystal contains silk III crystallites.     

Silk fibroin: structural implications of a remarkable amino acid sequence

The amino acid sequence of the heavy chain of Bombyx mori silk fibroin was derived from the gene sequence. The 5,263-residue (391-kDa) polypeptide chain comprises 12 low-complexity "crystalline" domains made up of Gly-X repeats and covering 94% of the sequence; X is Ala in 65%, Ser in 23%, and Tyr in 9% of the repeats. The remainder includes a nonrepetitive 151-residue header sequence, 11 nearly identical copies of a 43-residue spacer sequence, and a 58-residue C-terminal sequence. The header sequence is homologous to the N-terminal sequence of other fibroins with a completely different crystalline region. In Bombyx mori, each crystalline domain is made up of subdomains of approximately 70 residues, which in most cases begin with repeats of the GAGAGS hexapeptide and terminate with the GAAS tetrapeptide. Within the subdomains, the Gly-X alternance is strict, which strongly supports the classic Pauling-Corey model, in which beta-sheets pack on each other in alternating layers of Gly/Gly and X/X contacts. When fitting the actual sequence to that model, we propose that each subdomain forms a beta-strand and each crystalline domain a two-layered beta-sandwich, and we suggest that the beta-sheets may be parallel, rather than antiparallel, as has been assumed up to now.     

13C CP/MAS NMR study on structural heterogeneity in Bombyx mori silk fiber and their generation by stretching

It is important to resolve the structure of Bombyx mori silk fibroin before spinning (silk I) and after spinning (silk II), and the mechanism of the structural transition during fiber formation in developing new silk-like fiber. The silk I structure has been recently resolved by (13)C solid-state NMR as a "repeated beta-turn type II structure." Here, we used (13)C solid-state NMR to clarify the heterogeneous structure of the natural fiber from Bombyx mori silk fibroin in the silk II form. Interestingly, the (13)C CP/MAS NMR revealed a broad and asymmetric peak for the Ala Cbeta carbon. The relative proportions of the various heterogeneous components were determined from their relative peak intensities after line shape deconvolution. Namely, for 56% crystalline fraction (mainly repeated Ala-Gly-Ser-Gly-Ala-Gly sequences), 18% distorted beta-turn, 13% beta-sheet (parallel Ala residues), and 25% beta-sheet (alternating Ala residues). The remaining fraction of 44% amorphous Tyr-rich region, 22% in both distorted beta-turn and distorted beta-sheet. Such a heterogeneous structure including distorted beta-turn can be observed for the peptides (AG)(n) (n > 9 ). The structural change from silk I to silk II occurs exclusively for the sequence (Ala-Gly-Ser-Gly-Ala-Gly)(n) in B. mori silk fibroin. The generation of the heterogeneous structure can be studied by change in the Ala Cbeta peak of (13)C CP/MAS NMR spectra of the silk fibroin samples with different stretching ratios.     

Synthesis and characterization of chimeric silkworm silk

A synthetic gene encoding a chimeric silklike protein was constructed that combined a polyalanine encoding region (Ala)(18), a sequence slightly longer than the (Ala)(12-13) found in the silk fibroin from the wild silkworm Samia cynthia ricini, and a sequence encoding GVGAGYGAGAGYGVGAGYGAGVGYGAGAGY, found in the silk fibroin from the silkworm Bombyx mori. A tetramer of the chimeric repeat sequence encoding a approximately 29 kDa protein was expressed as a fusion protein in Escherichia coli. In comparison to S. c. ricini silk, the chimeric protein demonstrated improved solubility because it could be dissolved in 8 M urea. The purified protein assumed an alpha-helical structure based on solid-state (13)C CP/MAS NMR and was less prone to conformational transition to a beta-sheet, unlike native silk proteins from S. c. ricini. Model peptides representing the crystalline region of S. c. ricini silk fibroin, (Ala)(12) and (Ala)(18), formed beta-sheet structures. Therefore, the solubility and structural transitions of the chimeric protein were significantly altered through the formation of this chimeric silk. This experimental strategy to the study of silk structure and function can be used to develop an improved understanding of the contributions of protein domains in repetitive silkworm and spider silk sequences to structure development and structural transitions.     

Fibroin silk proteins from the nonmulberry silkworm Philosamia ricini are biochemically and immunochemically distinct from those of the mulberry silkworm Bombyx mori

Silk proteins were isolated from the cocoons of the nonmulberry silkworm, Philosamia ricini. Three polypeptides of 97, 66, and 45 kDa were identified. The 66-kDa molecule represented sericin, whereas the 97-kDa and the 45-kDa polypeptides linked together through a disulfide bond constituted the fibroin protein. Antibodies raised against the 97-kDa P. ricini fibroin heavy chain reacted specifically with this molecule and did not recognize fibroin heavy chain from another nonmulberry silkworm, Antheraea assama or from the mulberry silkworm, Bombyx mori, suggesting the presence of P. ricini species-specific determinants in this heavy chain. Antibodies generated against fibroin light chain of P. ricini also showed similar reactivity pattern. Immunoblot analysis with proteins isolated from the silk glands of P. ricini at different stages of larval development showed that the expression of fibroin heavy chain was developmentally and spatially regulated. The protein was most abundant in the 5th instar larva, and could be detected in the middle and the posterior but not the anterior silk glands. The amino acid composition of the 97-kDa fibroin protein showed abundance of glutamic acid and did not contain (Gly-Ala)(n) motifs, a characteristic feature of B. mori fibroin heavy chain. Our study reveals significant differences between the nonmulberry silkworm P. ricini and the mulberry silkworm B. mori in the biochemical composition and immunochemical characteristics of fibroin heavy chain. These differences might be responsible for the differences seen in the quality of silk produced by these two silkworms.     

Structural analysis of Bombyx mori silk fibroin peptides with formic acid treatment using high-resolution solid-state 13C NMR spectroscopy

Bombyx mori silk fibroin fiber is a fibrous protein produced by the silkworm at room temperature and from an aqueous solution whose primary structure is highly repetitive. In this study we analyzed the structural characteristics of native peptides, derived from B. mori silk fibroin, with formic acid treatment using high-resolution solid-state 13C NMR. We establish that the Ser residue bearing a short polar side chain has the ability to stabilize the conformation formed in the model peptides due to its ability to form intermolecular hydrogen bonds involving its hydroxyl group as a donor and the carbonyl groups of other residues as acceptors. On the other hand, insertion of Tyr residue in the basic (AG)n and (AGSGAG)n sequence motifs usually exhibited disruptive effects on the preferred conformations. Moreover, the environmental effect was investigated by mixing the native Cp fraction with the model peptides, showing that there is no significant structural difference on the Ser-containing peptides, while structural transformation was observed on the peptides containing the GAAS unit. This may be attributed to the fact that the Cp fraction promotes the formation of an antiparallel beta-sheet in the Ala-Ala unit. Such periodically disrupted ordered structures in the semicrystalline region of B. mori silk fibroin may be critical not only for facilitating the conformational transformation from silk I to silk II structural form but also for having some correlation with the unique properties of the silk materials.     

The role of irregular unit,GAAS, on the secondary structure of Bombyx mori silk fibroin studied with 13C CP/MAS NMR and wide-angle X-ray scattering

Bombyx mori silk fibroin is a fibrous protein whose fiber is extremely strong and tough, although it is produced by the silkworm at room temperature and from an aqueous solution. The primary structure is mainly Ala-Gly alternative copolypeptide, but Gly-Ala-Ala-Ser units appear frequently and periodically. Thus, this study aims at elucidating the role of such Gly-Ala-Ala-Ser units on the secondary structure. The sequential model peptides containing Gly-Ala-Ala-Ser units selected from the primary structure of B. mori silk fibroin were synthesized, and their secondary structure was studied with (13)C CP/MAS NMR and wide-angle X-ray scattering. The (13)C isotope labeling of the peptides and the (13)C conformation-dependent chemical shifts were used for the purpose. The Ala-Ala units take antiparallel beta-sheet structure locally, and the introduction of one Ala-Ala unit in (Ala-Gly)(15) chain promotes dramatical structural changes from silk I (repeated beta-turn type II structure) to silk II (antiparallel beta-sheet structure). Thus, the presence of Ala-Ala units in B. mori silk fibroin chain will be one of the inducing factors of the structural transition for silk fiber formation. The role of Tyr residue in the peptide chain was also studied and clarified to induce "locally nonordered structure."     

Design, expression and solid-state NMR characterization of silk-like materials constructed from sequences of spider silk, Samia cynthia ricini and Bombyx mori silk fibroins

Silk has a long history of use in medicine as sutures. To address the requirements of a mechanically robust and biocompatible material, basic research to clarify the role of repeated sequences in silk fibroin in its structures and properties seems important as well as the development of a processing technique suitable for the preparation of fibers with excellent mechanical properties. In this study, three silk-like protein analogs were constructed from two regions selected from among the crystalline region of Bombyx mori silk fibroin, (GAGSGA)(2), the crystalline region of Samia cynthia ricini silk fibroin, (Ala)(12), the crystalline region of spider dragline silk fibroin, (Ala)(6), and the Gly-rich region of spider silk fibroin, (GGA)(4). The silk-like protein analog constructed from the crystalline regions of the spider dragline silk and B. mori silk fibroins, (A(6)SCS)(8), that constructed from the crystalline regions of the S. c.ricini and B. mori silk fibroins, (A(12)SGS)(4), that constructed from and the crystalline region of S. c.ricini silk fibroin and the glycine-rich region of spider dragline silk fibroin, (A(12)SGS)(4),were expressed their molecular weights being about 36.0 kDa, 17.0 kDa and 17.5 kDa, respectively in E. coli by means of genetic engineering technologies. (A(12)SCS)(4) and (A(12)SGS)(4 )undergo a structural transition from alpha-helix to beta-sheet on a change in the solvent treatment from trifluoroacetic acid (TFA) to formic acid (FA). However, (A(6)SCS)(8) takes on the beta-sheet structure predominantly on TFA treatment and FA treatment. Structural analysis was performed on model peptides selected from spider dragline and S. c.ricini silks by means of (13)C CP/MAS NMR.     

Construction of silk fiber core in lepidoptera

The formation and properties of lepidopteran silk fibers depend on amino acid repeats in the principal protein, heavy chain fibroin (H-fibroin). In H-fibroins of the "bombycoid" type, concatenations of alanine or of the GAGAGS crystalline motifs (1st tier repeats) and adjacent sequences breaking periodicity make 2nd tier repeats. Two to six such repeats comprise a 3rd tier assembly, and 12 assemblies, linked by an amorphous sequence, constitute the repetitive H-fibroin region. Heterogeneity in the repeat length and intercalation of amorphous regions prevent excessive crystallization. In the "pyraloid" H-fibroins, iterations of simple motifs are absent and assemblies of several complex motifs constitute highly regular repeats that are organized in about 12 highest order reiterations without specific spacers. Repeat homogeneity appears crucial for the alignment and interaction of the disjunct motifs that must be registered precisely to form crystallites; repeat heterogeneity is associated with decreased fiber strength. Both H-fibroin types are typically hydrophobic, and their secretion requires disulfide linkage to light chain fibroin and participation of another protein, P25. These auxiliary proteins are absent in saturniid moths with amphiphilic H-fibroin repeats. The selection at nucleic acid and protein levels and the availability of nutrients play roles in H-fibroin evolution.     

Vibrational infrared conformational studies of model peptides representing the semicrystalline domains of Bombyx mori silk fibroin

The structural organization of Bombyx mori silk fibroin was investigated by infrared (IR) spectroscopy. To this aim, (AG)15 and other model peptides of varying chain length, containing tyrosine (Y), valine (V), and serine (S) in the basic (AG)n sequence were synthesized by the solid phase method and their spectroscopic properties were determined. Both the position and the relative content of Y, V, and S residues in the (AG)n model system appeared critical in determining the preferred conformation, i.e., silk I, silk II, and unordered structures. Curve fitting analysis in the amide I range showed that the model peptides with prevailing silk II structure displayed different beta-sheet content, which was dependent on the degree of interruption of the (AG)n sequence. In this regard, the bands at about 1000 and 980 cm(-1), specifically assigned to the AG sequence of the B. mori silk fibroin chain, were identified as marker of the degree of interruption of the (AG)n sequence.A stable silk I structure was observed only when the Y residue was located near the chain terminus, while a silk I --> silk II conformational transition occurred when it was positioned in the central region of the peptide.Analysis of the second-derivative spectra in the amide I range allowed us to identify a band at 1639 cm(-1) (4 --> 1 hydrogen-bonded type II beta-turns), which is characteristic of the silk I conformation.     

13C NMR of Nephila clavipes major ampullate silk gland.

The major ampullate glands of the spider Nephila clavipes contain approximately 0.2 microliter each of a highly concentrated (approximately 50%) solution of silk fibroin. Therefore, the reservoir of silk in these glands presents an ideal opportunity to observe prefolded conformations of a protein in its native state. To this end, the structure and conformation of major ampullate gland silk fibroin within the glands of the spider N. clavipes were examined by 13C NMR spectroscopy. These results were compared to those from silk protein first drawn from the spinneret and then denatured. The 13C NMR chemical shifts, along with infrared and circular dichroism data, suggest that the silk fibroin in the glands exists in dynamically averaged helical conformations. Furthermore, there is no evidence of proline residues in U-(13)C-D-glucose-labeled silk. This transient prefolded "molten fibril" state may correspond to the silk I form found in Bombyx mori silk. There is no evidence of the final beta-sheet structure in the ampullate gland silk fibroin before final silk processing. However, the conformation of silk in the glands appears to be in a highly metastable state, as plasticization with water produces the beta-sheet structure. Therefore, the ducts connecting the ampullate glands to the spinnerets play a larger role in silk processing than previously thought.     

An Australian webspinner species makes the finest known insect silk fibers

Aposthonia gurneyi, an Australian webspinner species, is a primitive insect that constructs and lives in a silken tunnel which screens it from the attentions of predators. The insect spins silk threads from many tiny spines on its forelegs to weave a filmy sheet. We found that the webspinner silk fibers have a mean diameter of only 65nm, an order of magnitude smaller than any previously reported insect silk. The purpose of such fine silk may be to reduce the metabolic cost of building the extensive tunnels. At the molecular level, the A. gurneyi silk has a predominantly beta-sheet protein structure. The most abundant clone in a cDNA library produced from the webspinner silk glands encoded a protein with extensive glycine-serine repeat regions. The GSGSGS repeat motif of the A. gurneyi silk protein is similar to the well-known GAGAGS repeat motif found in the heavy fibroin of silkworm silk, which also has beta-sheet structure. As the webspinner silk gene is unrelated to the silk gene of the phylogenetically distant silkworm, this is a striking example of convergent evolution.     

Silk fibroin of Bombyx mori is secreted, assembling a high molecular mass elementary unit consisting of H-chain, L-chain, and P25, with a 6:6:1 molar ratio

Silk fibroin produced by the silkworm Bombyx mori consists of a heavy chain, a light chain, and a glycoprotein, P25. The heavy and light chains are linked by a disulfide bond, and P25 associates with disulfide-linked heavy and light chains by noncovalent interactions. Quantitative enzyme-linked immunosorbent assay revealed that molar ratios of the heavy chain, light chain, and P25 were 6:6:1, both in cocoons and in fibroin secreted into the lumen of posterior silk gland. Trace amounts of fibroin produced by three "naked pupa" mutants of B. mori lacked the light chain, but the molar ratio of heavy chain and P25 was also 6:1. Gel filtration chromatography and sedimentation equilibrium analysis demonstrated that a large protein complex of approximately 2.3 MDa, designated an elementary unit of fibroin having 6:6:1 molar ratios of the heavy chain, light chain, and P25, existed in posterior silk gland cells. Inaccessibility of biotinylated concanavalin A to the native elementary unit and partial dissociation of the elementary unit after incubation with excess N-glycosidase F or endoglycosidase H suggest that a single molecule of P25 is located internally and plays an important role in maintaining integrity of the complex.     

Possible implications of serine and tyrosine residues and intermolecular interactions on the appearance of silk I structure of Bombyx mori silk fibroin-derived synthetic peptides: high-resolution 13C cross-polarization/magic-angle spinning NMR study

Bombyx mori silk fibroin molecule is known to exist in two distinct structural forms: silk I (unprocessed silk fibroin) and silk II (processed silk fibroin). Using synthetic peptides, we attempt to explore the structural role played by Ser and Tyr residues on the appearance of silk I structural form of the fibroin. Twelve selected peptides (1-12) incorporating Ser and Tyr residues in the (Ala-Gly)(n) copolypeptide, that is, the sequences mimicking the primary structure of B. mori silk fibroin molecule, have been investigated under the silk I state, employing high-resolution (13)C cross-polarization/magic-angle spinning (CP/MAS) NMR spectroscopy. To acquire the silk I structural form, all the peptides were dissolved in 9 M LiBr and then dialyzed extensively against water, as established previously for the synthetic (Ala-Gly)(15) copolypeptide and B. mori silk fibroin. The diagnostic line shape of the Ala C(beta) peaks and the conformation-dependent (13)C chemical shifts of Ala and Gly resonances are presented to analyze and characterize the structural features. The results indicate that the incorporation of one Ser and/or one Tyr residue(s) at selected position in the basic (Ala-Gly)(15) sequence tend to retain predominantly the silk I structure. Conversely, the repeat pentameric and octameric Ala-Gly-Ser-Gly-Ala-Gly sequences, for example, (Ala-Gly-Ser-Gly-Ala-Gly)(5) or (Ala-Gly-Ser-Gly-Ala-Gly)(8), preferred predominantly the silk II form. The peptide sequences incorporating Ser and Tyr residue(s) into repeat Ala-Gly-Ser-Gly-Ala-Gly sequences, however, adopted the silk II structure with certain content structural heterogeneity or randomness, more pronounced for specific peptides studied. Interestingly, the crystalline Cp fraction of B. mori silk fibroin, when mixed with (Ala-Gly-Ser-Gly-Ala-Gly)(5) sequence in a 5:1 molar ratio, dissolved in 9 M LiBr, and dialyzed against distilled water, favor the silk I form. The finding tends to suggest that the less stable silk I form in (Ala-Gly-Ser-Gly-Ala-Gly)(n) sequences is likely to be induced and facilitated via intermolecular interactions with the Cp fraction, which predominantly prefers the silk I form under similar conditions; however, the hydrogen-bond formation involving O(gamma)H groups of the Ser residues may have some implications.     

Optical spectroscopy to investigate the structure of regenerated Bombyx mori silk fibroin in solution

Fluorescence and circular dichroism spectroscopy were used to monitor the conformational transition of regenerated Bombyx mori silk fibroin (RSF) in aqueous solutions under different conditions. According to the analysis of fluorescence spectra using anilinonaphthalene-8-sulfonic acid magnesium salt (ANS) as an external probe, the destruction of the hydrophobic core prior to the secondary structure change suggests that this collapse may initiate the conformational transition from random coil to beta-sheet for RSF. The temperature dependence of the structural changes of RSF, detected by both fluorescence spectroscopy and circular dichroism, shows a reversible process upon heating and recooling, with the midpoint around 45 degrees C. The results also indicate that most of the tryptophan (Trp) residues contained in silk fibroin are concentrated on the surface of the unfolded protein. However, they will change their location in the highly ordered structure (e.g., becoming more homogeneous) with the conformational transition of silk fibroin. Moreover, our studies also suggest that the presence of water plays a crucial role during the structure changes of fibroin.     

Swelling and dissolution of silk fibroin (Bombyx mori) in N-methyl morpholine N-oxide.

Bombyx mori silk fibers were dissolved in N-methyl morpholine N-oxide (MMNO), an organic cyclic amine oxide used for the solvent spinning of regenerated cellulosic fibers. The commercial MMNO monohydrate used in this study as a solvent for silk is a hygroscopic compound crystalline at room temperature, which becomes an active solvent after melting at 76 degrees C. The degree of hydration of MMNO was checked by DSC measurements. The solvation power of MMNO towards silk fibroin drastically decreased at a water content > or = 20-21% w/w. Dissolution of silk required both thermal and mechanical energy. The optimum temperature was 100 degrees C. At lower temperatures dissolution proceeded very slowly. At higher temperatures, rapid depolymerization of silk fibroin occurred. The value of the Flory-Huggins interaction parameter chi for the MMNO-H2O-silk fibroin system was -8.5, suggesting that dissolution is a thermodynamically favored process. The extent of degradation of silk fibroin was assessed by measuring the intrinsic viscosity and determining the amino acid composition of silk after regeneration with an aqueous methanol solution, which was effective in removing the solvent and coagulating silk. Regenerated silk fibroin membranes were characterized by infrared spectroscopy, differential scanning calorimetry and scanning electron microscopy. The prevailing molecular conformation of silk fibroin chains was the beta-sheet structure, as shown by the intense amide I-III bands at 1704, 1627, 1515, 1260, and 1230 cm(-1). The value of the I1260/I1230 intensity ratio (crystallinity index) was 0.68, comparable to that of the fibers. The DSC thermogram was characteristic of a silk fibroin material with unoriented beta-sheet crystalline structure, with an intense decomposition endotherm at 294 degrees C. The SEM examination of fractured surfaces showed the presence of a dense microstructure with a very fine texture formed by densely packed roundish particles of about 100-200 nm diameter.     

Conformation transition kinetics of Bombyx mori silk protein

Time-resolved FTIR analysis was used to monitor the conformation transition induced by treating regenerated Bombyx mori silk fibroin films and solutions with different concentrations of ethanol. The resulting curves showing the kinetics of the transition for both films and fibroin solutions were influenced by the ethanol concentration. In addition, for silk fibroin solutions the protein concentration also had an effect on the kinetics. At low ethanol concentrations (for example, less than 40% v/v in the case of film), films and fibroin solutions showed a phase in which beta-sheets slowly formed at a rate dependent on the ethanol concentration. Reducing the concentration of the fibroin in solutions also slowed the formation of beta-sheets. These observations suggest that this phase represents a nucleation step. Such a nucleation phase was not seen in the conformation transition at ethanol concentrations > 40% in films or > 50% in silk fibroin solutions. Our results indicate that the ethanol-induced conformation transition of silk fibroin in films and solutions is a three-phase process. The first phase is the initiation of beta-sheet structure (nucleation), the second is a fast phase of beta-sheet growth while the third phase represents a slow perfection of previously formed beta-sheet structure. The nucleation step can be very fast or relatively slow, depending on factors that influence protein chain mobility and intermolecular hydrogen bond formation. The findings give support to the previous evidence that natural silk spinning in silkworms is nucleation-dependent, and that silkworms (like spiders) use concentrated silk protein solutions, and careful control of the pH value and metallic ion content of the processing environment to speed up the nucleation step to produce a rapid conformation transition to convert the water soluble spinning dope to a tough solid silk fiber.     

Araneoid egg case silk: a fibroin with novel ensemble repeat units from the black widow spider, Latrodectus hesperus

Araneoid spiders use specialized abdominal glands to manufacture up to seven different protein-based silks/glues that have diverse physical properties. The fibroin sequences that encode egg case fibers (cover silk for the egg case sac) and the secondary structure of these threads have not been previously determined. In this study, MALDI tandem TOF mass spectrometry (MS/MS) and reverse genetics were used to isolate the first egg case fibroin, named tubuliform spidroin 1 (TuSp1), from the black widow spider, Latrodectus hesperus. Real-time quantitative PCR analysis demonstrates TuSp1 is selectively expressed in the tubuliform gland. Analysis of the amino acid composition of raw egg case silk closely aligns with the predicted amino acid composition from the primary sequence of TuSp1, which supports the assertion that TuSp1 represents a major component of egg case fibers. TuSp1 is composed of highly homogeneous repeats that are 184 amino acids in length. The long stretches of polyalanine and glycine-alanine subrepeats, which account for the crystalline regions of minor ampullate and major ampullate fibers, are very poorly represented in TuSp1. However, polyserine blocks and short polyalanine stretches were highly iterated within the primary sequence, and (13)C NMR spectroscopy demonstrated that the majority of alanine was found in a beta-sheet structure in post-spun egg case silk. The TuSp1 repeat unit does not display substantial sequence similarity to any previously described fibroin genes or proteins, suggesting that TuSp1 is a highly divergent member of the spider silk gene family.     

Proteomic analysis of 3T3-L1 preadipocytes having a higher cell proliferation rate after treatment with low-molecular-weight silk fibroin peptides

Objectives: Previous studies have reported that fibroin peptides can be used in a new strategy for development of anti‐diabetic peptide drugs. In this study, we separated silk fibroin hydrolysates (SFH) containing silk fibroin peptides into four components according to their molecular weight and tested the effects of these together with three synthetic silk fibroin hexapeptides GAGAGS, GAGAGY, GAGAGA on cell proliferation of 3T3‐L1 preadipocytes. The aim of this study was to investigate protein expression profiles of 3T3‐L1 preadipocytes and those treated with SFH component Fraction I and the synthetic silk fibroin hexapeptide GAGAGS to be able to elucidate difference in protein expression between the 3T3‐L1 preadipocytes and those treated with fibroin peptides Fraction I and GAGAGS. Materials and methods: SFH was separated by dialysis. MTT assays were performed to test effects of SFH components and synthetic silk fibroin hexapeptides on 3T3‐L1 preadipocyte proliferation. We generated proteome maps using two‐dimensional gel electrophoresis and analysed them by peptide mass fingerprinting. Results: GAGAGS and peptide mixtures, Fraction I and Fraction II, had significant effect in promoting 3T3‐L1 preadipocyte proliferation. In the proteomic analysis, 73 protein spots were successfully identified, including 15 which were differentially expressed. Conclusions: Our results show that some silk fibroin peptides of low molecular weight SFH and hexapeptide GAGAGS affected 3T3‐L1 preadipocyte proliferation.