In vitro and in vivo evaluation of intravesical docetaxel loaded hydrophobically derivatized hyperbranched polyglycerols in an orthotopic model of bladder cancer

The objective of this study was to evaluate the tolerability, to establish a dosing regimen, and to evaluate the efficacy of intravesical docetaxel (DTX) formulations in a mouse model of bladder cancer. DTX in commercial formulation (Taxotere, DTX in Tween 80) or loaded in hyperbranched polyglycerols (HPGs) was evaluated. The synthesis and characterization of HPGs with hydrophobic cores and derivatized with methoxy poly(ethylene glycol) in the shell and further functionalized with amine groups (HPG-C(8/10)-MePEG and HPG-C(8/10)-MePEG-NH(2)) is described. Intravesical DTX in either commercial or HPGs formulations (up to 1.0 mg/mL) was instilled in mice with orthotopic bladder cancer xenografts and was well tolerated with no apparent signs of local or systemic toxicities. Furthermore, a single dose of intravesical DTX (0.5 mg/mL) loaded in HPGs was significantly more effective in reducing the tumor growth in an orthotopic model of bladder cancer than the commercial formulation of Taxotere. In addition, DTX-loaded HPG-C(8/10)-MePEG-NH(2) was found to be more effective at lower instillation dose than DTX (0.2 mg/mL)-loaded HPG-C(8/10)-MePEG. Overall, our data show promising antitumor efficacy and safety in a recently validated orthotopic model of bladder cancer. Further research is warranted to evaluate its safety and efficacy in early phase clinical trials in patients refractory to standard intravesical therapy.     

The viability of bifidobacteria introduced into kimchi

The viability of bifidobacteria in mul-kimchi, a type of kimchi with added water, was investigated under various conditions. When a mul-kimchi preparation was inoculated with five strains of Bifidobacterium at a concentration of 10(7) cfu ml-1, Bif. longum JK-2 showed the highest viability, maintaining a population of 10(6) cfu ml-1 after 1 week at 4 degrees C. The influence of NaCl concentration and initial pH on viability was further investigated in mul-kimchi inoculated with Bif. longum JK-2; NaCl concentrations greater than 3% (w/w) reduced viability considerably. In kimchi started with an initial pH of 6.5, the cells showed the highest survival. When mul-kimchi containing 2% NaCl (w/w) was inoculated with 10(8) cfu ml-1 Bif. longum JK-2, there was a 10-fold reduction in viability during 10 d of incubation at 4 degrees C. These results demonstrate acceptable levels of the organism in the product, suggesting the possible use of selected strains of bifidobacteria in commercial kimchi production.     

Specific determination of intact cisplatin and monohydrated cisplatin in human plasma and culture medium ultrafiltrates using HPLC on-line with inductively coupled plasma mass spectrometry

We have developed a specific assay for cisplatin in human plasma ultrafiltrate (PUF) and cell culture medium ultrafiltrate (MUF) using HPLC on-line with inductively coupled plasma mass spectrometry (ICP-MS). Separation of cisplatin (6 min) and monohydrated cisplatin (12 min) was achieved using a muBondapak C(18) column (Waters) and a mobile phase (0.075 mM sodium dodecyl sulfate and 3% methanol, adjusted to pH 2.5 with triflic acid) pumped at a flow rate of 0.5 mL/min. The analytes were detected with little background interference by ICP-MS monitoring of platinum masses (m/z 194/195). Calibration curves were linear over three orders of magnitude (0.05-8 microM) and the limit of quantitation was 0.1 microM. Intra- and inter-assay accuracy (range 91.6-113%) and precision (range 1.00-12.3%) were acceptable for PUF and MUF. The method was applied to determining cisplatin during ex vivo incubation of the drug in whole human blood at 37 degrees C. In conclusion, a specific, sensitive and reliable HPLC-ICP-MS assay has been established for determining intact cisplatin in PUF and MUF.     

Comparison of K,MgATPases in purified plasmalemma from wheat and oat. – Substrate specificities and effects of pH, temperature and inhibitors

Plasmalemma from 8-day old oat ( Avena sativa L. cv. Brighton) and spring wheat ( Triticum aestivum L. cv. Drabant), grown in the dark at 18°C, was prepared from the 10000 g (10 min) – 30 000 g (60 min) root homogenate by two-phase separation in three steps with 6.5% (w/w) Dextran T 500 and 6.5% (w/w) polyethylene glycol 4 000. Biochemically and with respect to activation by Mg²⁺ as well as by (Mg²⁺+ K⁺), the oat preparations clearly appeared as ATPase(s) in the pH range 5–8. They showed high specificity for ATP, temperature optima between 38 and 40°C, and were inhibited by vanadate, DCCD (dicyclohexylcarbodiimide) and SH-reagents, but not by oligomycin, ammonium molybdate or ouabain. In contrast, the preparations from wheat contained more than one type of MgATPase/ nucleotidase, as revealed by complex dependence on both pH and temperature as well as by comparatively low specificity towards nucleotides. However, no unspecific phosphatase was present, and the effect of K⁺ over and above that of Mg²⁺ was almost as specific as in oat by all criteria used. The data available from this and earlier investigations from our group would indicate that the complex reactions of preparations of wheat plasmalemma may not be due to contamination but, rather, expressions of the many biological functions that must be associated with the plasmalemma in vivo and which may be located in sub-units that are more firmly attached to wheat than to oat plasmalemma.     

Tolerance of Bradyrhizobium sp. (Lupini) strains to salinity, pH, CaCO3 and antibiotics

AIMS: Ten rhizobial isolates obtained from different locations in Egypt were examined for their ability to survive under stress conditions and their growth response to increasing levels of NaCl (1-8% w/v), pH (4-10), CaCO3 (1-10% w/v) and 12 antibiotics. METHODS AND RESULTS: All the rhizobial isolates tolerated a NaCl concentration up to 5% and were divided into two groups with respect to NaCl tolerance. The rhizobial isolates from group two showed significantly (P < 0.05) better survival under high NaCl concentration. All the tested isolates survived acidic (pH 4-5) and alkaline conditions (pH 9-10) and CaCO3 (up to 10% w/v) in liqued YEM medium. CONCLUSION: Antibiotic resistance patterns did not correlate to NaCl, pH or CaCO3 tolerance. Variations among different strains showed that there is potential to improve strain performance under stress conditions. Significance and Impact of the Study: The results suggest that selection of adapted strains under stress conditions is possible and can be used as inoculants for successful lupin growth.     

Manganese, calcium, and saccharide binding to concanavalin A, as studied by ultrafiltration

The binding of the ligands Mn2+, Ca2+, and methyl alpha-D-glucopyranoside to concanavalin A, purified as described (A.J. Sophianopoulos and J.A. Sophianopoulos (1981) Prep. Biochem. 11, 413-435), was studied by ultrafiltration in 0.2 M NaCl, pH 5.2 and pH 6.5 to 7, and at 23 to 25 degrees C. The association constant (Ka) of methyl alpha-D-glucopyranoside to concanavalin A was (2 +/- 0.2) X 10(3) M-1, both at pH 5.2 and 7. At pH 5.2 and in the absence of Ca2+, the Ka of Mn2+ to concanavalin A was (5 +/- 1) X 10(3) M-1, and in the presence of 1 mM Ca2+, the Ka was (9.1 +/- 2.1) X 10(5) M-1. At pH 6.5 Mn2+ bound to concanavalin A with a Ka of (7.3 +/- 1.8) X 10(5) M-1, and the binding affinity was virtually independent of the presence of Ca2+. Experiments of binding of 4-methylumbelliferyl alpha-D-mannopyranoside to concanavalin A indicated that at pH 5.2, binding of a single Mn2+ per concanavalin A monomer was sufficient to induce a fully active saccharide binding site. Ca2+ is not necessary for such activation, but rather it increases the affinity of concanavalin A for binding Mn2+.     

The Effect of Polysorbate 20 on Solubility and Stability of Candesartan Cilexetil in Dissolution Media

The addition of polysorbate 20 (T20) is required to achieve “sink” conditions during a dissolution test for tablets with candesartan cilexetil (CC). Polysorbate 20 (0.35%–0.7% w/w) added to 0.05 mol/L of phosphate buffer pH 6.5 dramatically increased the apparent solubility of the drug from 0.8 μg/ml even to 353 μg/ml, while its effect in lower pH or in water was much smaller (20 μg/ml in pH 4.5). The increased concentration of phosphate salts (0.2 mol/l) at pH 6.5 in the presence of 0.7% of polysorbate 20, resulted in further increase of candesartan cilexetil solubility to 620 μg/ml. The change of pH from 1.2 to 7.4 resulted in a 1.5-fold increase of the activation energy and, depending on temperature, 8–14-fold decrease of the degradation rate. When polysorbate 20 increased the activation energy 2-fold, independent of pH, it protected candesartan cilexetil from degradation; however, this effect was temperature dependent and was very small at 310 K—the degradation rate in pH 6.5 decreased by 13% only. It was calculated that in the phosphate buffer pH 6.5 with polysorbate, one can expect during 24 h the degradation at the level of 9.3%, thus a flow-through dissolution apparatus was recommended for testing prolonged release dosage forms.     

pH stability of the stromelysin-1 catalytic domain and its mechanism of interaction with a glyoxal inhibitor

The stromelysin-1 catalytic domain(83-247) (SCD) is stable for at least 16 h at pHs 6.0-8.4. At pHs 5.0 and 9.0 there is exponential irreversible denaturation with half lives of 38 and 68 min respectively. At pHs 4.5 and 10.0 irreversible denaturation is biphasic. At 25°C, C-terminal truncation of stromelysin-1 decreases the stability of the stromelysin-1 catalytic domain at pH values >8.4 and <6.0. We describe the conversion of the carboxylate group of (βR)-β-[[[(1S)-1-[[[(1S)-2-Methoxy-1-phenylethyl]amino]carbonyl]-2,2-dimethylpropyl]amino]carbonyl]-2-methyl-[1,1'-biphenyl]-4-hexanoic acid (UK-370106-COOH) a potent inhibitor of the metalloprotease stromelysin-1 to a glyoxal group (UK-370106-CO(13)CHO). At pH 5.5-6.5 the glyoxal inhibitor is a potent inhibitor of stromelysin-1 (K(i)=~1μM). The aldehyde carbon of the glyoxal inhibitor was enriched with carbon-13 and using carbon-13 NMR we show that the glyoxal aldehyde carbon is fully hydrated when it is in aqueous solutions (90.4ppm) and also when it is bound to SCD (~92.0ppm). We conclude that the hemiacetal hydroxyl groups of the glyoxal inhibitor are not ionised when the glyoxal inhibitor is bound to SCD. The free enzyme pK(a) values associated with inhibitor binding were 5.9 and 6.2. The formation and breakdown of the signal at ~92ppm due to the bound UK-370106-CO(13)CHO inhibitor depends on pK(a) values of 5.8 and 7.8 respectively. No strong hydrogen bonds are present in free SCD or in SCD-inhibitor complexes. We conclude that the inhibitor glyoxal group is not directly coordinated to the catalytic zinc atom of SCD.     

Factors affecting germination, mycoparasitism, and survival of Sporidesmium sclerotivorum.

Macroconidia of Sporidesmium sclerotivorum, a mycoparasite of Sclerotinia spp., germinated after 3 days in soil adjacent to sclerotia of S. minor and on membrane filters placed on soil containing sclerotia. Germination increased with time up to 18 days and with concentration of sclerotia. Conidia as distant as 9 mm from single sclerotia germinated. Germination of conidia was maximum on a sclerotial agar medium in the range of pH 5 to pH 7. Cultivation of S. sclerotivorum parasitically on living sclerotia proceeded optimally in moist, fine quartz sand amended with 1 to 2% (w/w) sclerotia and 0.07% (w/w) CaCO3, at 25 degrees C. Infection of sclerotia in sand reached 100% by 5 weeks. Conidia production paralled infection resulting in logarithmic increase in numbers; a maximum of 3 x 10(5) to 4 x 10(5) conidia/g was reached in 6 to 12 weeks. Viability of air-dried sand-sclerotial cultures of S. sclerotivorum was reduced after 1 and 6 days, but viability was undiminished in air-dried soil. Sporidesmium sclerotivorum survived in moist and air-dried soils stored at room temperature for 15 months.     

The pH dependence of binding of alpha,alpha'-dibromo-p-xylenesulfonic acid to lysozyme.

The chemical modification of lysozyme (I) has been accomplished with alpha, alpha'-dibromo-p-xylenesulfonic acid (DBX) at five different pH values. I was alkylated by DBX at room temperature (28 degrees C) with decrease in enzyme activity. The rate of inactivation depended upon the pH at which alkylation was carried out. The highest rate was seen at alkaline pH values; the lowest at more acidic pH values. Amino acid analyses showed that-two lysines and two tryptophan residues had been modified at pH 9; two lysines, one tryptophan and one methionine had reacted at pH 8. A histidine residue was bound at pH 6.5 together with a tryptophan residue. At the lower pH values (2.7, 4.5, 6.5), alkylation occurred with a single tryptophan residue each. Fluorescence and CD data both ruled out the participation of tryptophans 62 or 108. Labeling experiments showed that two residues of DBX-35S were bound per molecule of I at both pH9 and pH8; one residue of DBX was bound per molecule of I at the other pH values. Sedimentation coefficients were characteristic of native lysozyme. The stoichiometry of binding and residue modification indicated that intra-molecular cross links were established. The pH dependence of the cross-linking provides means to measure several allowed intra-molecular distances. The results presented here are consistent with the existence of side chain motion in lysozyme.     

Effect of pH on competence development and deoxyribonucleic acid uptake in Streptococcus sanguis (Wicky).

Streptococcus sanguis (Wicky) cells, strain WE4, developed little or no competence and failed to autolyze in permissive conditions when treated with competence factor (CF) below PH 7.0. This lack of activity was directly correlated with the inability of the cells to bind or take up CF at pH values of 5.5, 6.0, and 6.5. On the other hand, competent cells bound deoxyribonucleic acid molecules maximally below pH 7.0 and transformed maximally at pH 6.5. Deoxyribonucleic acid was optimally bound to cells in a deoxyribonuclease-resistant form at pH values between 7.0 and 8.5. Concomitant with this binding, undefined acid-soluble DNA fragments appeared in the culture menstrua. CF binding and uptake by cells was not only influenced by low pH but also by low temperature. At 0 C, WE4 cells bound only 4% of the input CF and took up less than 1% into a trypsin-insensitive state compared to cells treated at 37 C. Cells treated with CF at 0 C did not autolyze when transferred to permissive conditions. The results presented in this report extend earlier findings that showed that competence development and autolysis are related to the uptake of CF.     

Binding of Tamm-Horsfall protein to complement 1q and complement 1, including influence of hydrogen-ion concentration

The goal of this study was to further characterize the interaction between an abundant urinary glycoprotein, Tamm-Horsfall protein, and complement 1q to determine the robustness of this reaction under different environmental conditions (particularly pH) and to begin to determine the specificity of this reaction. The influence of pH coupled with ionic strength was evaluated with an ELISA that demonstrated immobilized Tamm-Horsfall protein bound complement 1q strongly with a KD in the nmol/L range from pH 9 to pH 5.5. Increasing the ionic strength from 10 mmol/L sodium chloride (NaCl) to 154 mmol/L NaCl decreased the affinity of Tamm-Horsfall protein for complement 1q slightly (2-7-fold) at pH 9 to pH 6.5. A resonant mirror biosensor was also utilized to evaluate the binding of Tamm-Horsfall protein to complement 1q at different pH values (pH 8.2-5.8). These studies indicated that, compared to at pH 8.2, Tamm-Horsfall protein bound complement 1q at pH 5.8 with an almost two-fold higher affinity (pH 8.2, KD = 5.1 nmol/L vs at pH 5.8, KD = 2.8 nmol/L) due to a faster association rate (pH 8.2 kass = 1.6 x 106 L/mol per s vs pH 5.8 kass = 2.9 x 106 L/mol per s). Surprisingly, the capacity of Tamm-Horsfall protein for complement 1q decreased significantly at pH 5.8, suggesting that a site for complement 1q binding to Tamm-Horsfall protein may be lost at the acidic pH. Biosensor studies also showed that Tamm-Horsfall protein bound the entire complement 1 complex with binding affinities and association rates similar to those obtained for complement 1q individually. This suggested that Tamm-Horsfall protein bound complement 1q at a site other than the region of its collagenous tail where C1r2 and C1s2 bind. By western blot analysis, it was demonstrated that Tamm-Horsfall protein bound preferentially to the C chain of complement 1q.     

Fatty acid interactions with rat intestinal and liver fatty acid-binding proteins expressed in Escherichia coli. A comparative 13C NMR study

Enterocytes in the small intestinal mucosa contain abundant quantities of two homologous cytosolic proteins known as intestinal and liver fatty acid-binding proteins (I- and L-FABP, respectively). To elucidate structure-function relationships for these proteins, the interactions between 13C-enriched palmitate and oleate and Escherichia coli-expressed rat I- and L-FABP were systematically compared using 13C NMR spectroscopy. NMR spectra of samples containing fatty acids (FA) and I-FABP at different molar ratios (all at pH 7.2 and 37 degrees C) exhibited a single carboxyl resonance corresponding to FA bound to I-FABP (181.4 ppm, peak I) and an additional carboxyl resonance corresponding to unbound FA in a bilayer phase (179.6 ppm). Peak I reached a maximum intensity corresponding to 1 mol of bound FA/mol of I-FABP under all sample conditions examined. NMR spectra for samples containing FA and L-FABP also exhibited a single carboxyl resonance corresponding to FA bound to L-FABP but at a different chemical shift value (182.2 ppm, peak L). Its maximum intensity varied depending on the physical state of the unbound FA (liquid crystalline or crystalline), the FA used (palmitate or oleate), and the sample pH. In the presence of a liquid crystalline (bilayer) phase, up to 1 (oleate) or 2 (palmitate) mol of FA were bound/mol of L-FABP, but in the presence of a crystalline phase (1:1 acid-soap), up to 3 mol of palmitate were bound/mol of L-FABP (all at pH 7.2). Peak I exhibited little or no ionization shift over a wide pH range (pH 3.0-11.0), and its chemical shift was unaffected by the ionization of Lys and His residues. Hence, the carboxylate group of FA bound to I-FABP was solvent inaccessible and most likely involved in an ion-pair electrostatic interaction with the delta-guanidinium moiety of an Arg residue. In contrast, peak L exhibited an ionization shift and an estimated apparent pKa value similar to that obtained for monomeric FA in water, suggesting that the carboxylate groups of FA bound to L-FABP were solvent accessible and located at or near the protein solvent interface. With decreasing pH, FA dissociated from L-FABP but not I-FABP, as monitored by NMR peak intensities. Concurrently, a large decrease in circular dichroism molar ellipticity was observed with L-FABP but not I-FABP. In conclusion, I-FABP and L-FABP are distinct with regards to their FA-binding stoichiometries, binding mechanisms, and sensitivity to pH.(ABSTRACT TRUNCATED AT 400 WORDS)     

Prostaglandin-sensitive adenylate cyclase of a murine macrophage-like cell line (P388D1): II. Isolation and partial characterization of PGE2-binding proteins

Properties of prostaglandin (PG) E2 binding sites of a murine macrophage cell line (P388D1) were investigated. The specific binding of [3H]-PGE2 to intact P388D1 cells at 4 degrees C in the presence of cytochalasin D (10 micrograms/ml) approached saturation at concentration greater than 7.5 X 10(-9) M, and could be displaced most effectively by unlabeled PGE2 and less effectively by unlabeled PGI2. The Scatchard analysis of the binding data clearly indicated the heterogeneity with respect to the PGE2 binding affinity and showed the presence of about 3.9 fmol/10(8) cells of the high affinity sites (KD = 1.1 X 10(-9) M) and about 24 fmol/10(8) cells of the low affinity sites (KD = 2 X 10(-8) M). PGE2-binding proteins were isolated from the detergent lysate of the radiolabeled P388D1 cells by affinity chromatography on Sepharose 4B coupled to PGE2. The affinity-isolated materials were further purified by successive use of Sephadex G-100 gel filtration and isoelectric focusing in the presence of dithiothreitol (1 mM) and Triton X-100 (0.5%). The final step yielded about 0.25% of the original radioactivity, which sharply focused as a single peak at pH near 6.5. The electrofocused PGE2-binding proteins migrated as a single band with a m.w. of 95,000 during SDS-PAGE. The electrofocused PGE2-binding proteins bound specifically to [3H]-PGE2 but showed again the heterogeneity with respect to their affinity.     

Production of Bacteriocin ST33LD, Produced by Leuconostoc mesenteroides subsp. mesenteroides, as Recorded in the Presence of Different Medium Components

Summary Bacteriocin ST33LD, produced by Leuconostoc mesenteroides subsp. mesenteroides, is approximately 2.7 kDa in size and inhibits Enterococcus faecalis, Escherichia coli, Lactobacillus casei and Pseudomonas aeruginosa. Good growth was recorded in the presence of 10% (w/v) soy milk or 10% (w/v) molasses, but there was no bacteriocin production. Growth in MRS broth adjusted to pH 4.5 yielded low bacteriocin levels (800 AU/ml). However, the same medium adjusted to pH 5.0, 5.5 and 6.5, respectively, yielded 3200 AU/ml. Tween 80 decreased bacteriocin production by more than 50%. Growth in the presence of tryptone yielded maximal activity (12,800 AU/ml), whereas different combinations of tryptone, meat extract and yeast extract produced activity levels of 1600 AU/ml and less. Growth in the presence of 2.0% (w/v) sucrose, or maltose, yielded much higher levels of bacteriocin activity (12,800 AU/ml) compared to growth in the presence of 2.0% (w/v) glucose or lactose (6400 AU/ml). Lower yields were also recorded in the presence of fructose and mannose. KH₂PO₄ at 10.0% (w/v) stimulated bacteriocin production. Glycerol concentrations of 0.5% (w/v) and higher (up to 5.0%, w/v) repressed bacteriocin production by 50%. The addition of cyanocobalamin, thiamine and L-ascorbic acid to MRS broth (1.0 ppm) yielded 12,800 AU/ml bacteriocin, whereas the addition of DL-6,8-thioctic acid yielded only 6 400 AU/ml.     

Protonated state of methotrexate, trimethoprim, and pyrimethamine bound to dihydrofolate reductase

13C nuclear magnetic resonance (NMR) of methotrexate, trimethoprim, and pyrimethamine enriched 90% with 13C at C2 has provided a sensitive means of detecting the state of protonation of the heterocyclic rings of these inhibitors. In each case, protonation of N1 causes an upfield movement of the chemical shift of C2 by more than 6 ppm. By this method it has been shown that, at pH values up to 9.2, methotrexate is bound to bovine liver dihydrofolate reductase with N1 of the inhibitor protonated, just as in the case of the complex with reductase from Streptococcus faecium and Lactobacillus casei. Furthermore, trimethoprim bound to reductase from any of the three sources, and pyrimethamine bound to either of the bacterial reductases also have N1 protonated even at pH values up to 10. This implies that in all cases there is a strong interaction between protonated N1 of the inhibitor and the carboxylate group of the active site aspartate or glutamate. In every case pKa of the bound inhibitor is increased by several units, a finding in accord with crystallographic evidence that inhibitor bound to L. casei reductase is in a hydrophobic environment and that N1 is not hydrogen-bonded to water. It was confirmed by titration of protein fluorescence that trimethoprim has greater affinity for bacterial reductase than for vertebrate (bovine) reductase, and that this selectivity is more marked in ternary complexes in which NADPH is also bound to the active site. However, the data cited above indicate that this difference in affinities is not due to a weaker ionic interaction between protonated N1 of trimethoprim and the bovine enzyme. Instead, binding of the trimethoprim side chain to hydrophobic sites on the enzyme must provide less binding energy in the case of the mammalian enzyme.     

Elimination of Escherichia coli O157:H7 from fermented dry sausages at an organoleptically acceptable level of microencapsulated allyl isothiocyanate

Four sausage batters (17.59% beef, 60.67% pork, and 17.59% pork fat) were inoculated with two commercial starter culture organisms (>7 log(10) CFU/g Pediococcus pentosaceus and 6 log(10) CFU/g Staphylococcus carnosus) and a five-strain cocktail of nonpathogenic variants of Escherichia coli O157:H7 to yield 6 to 7 log(10) CFU/g. Microencapsulated allyl isothiocyanate (AIT) was added to three batters at 500, 750, or 1,000 ppm to determine its antimicrobial effects. For sensory analysis, separate batches with starter cultures and 0, 500, or 750 ppm microencapsulated AIT were produced. Sausages were fermented at < or =26 degrees C and 88% relative humidity (RH) for 72 h. Subsequently sausages were dried at 75% RH and 13 degrees C for at least 25 days. The water activity (a(w)), pH, and levels of starter cultures, E. coli O157:H7, and total bacteria were monitored during fermentation and drying. All sausages showed changes in the initial pH from 5.57 to 4.89 and in a(w) from 0.96 to 0.89 by the end of fermentation and drying, respectively. Starter culture numbers were reduced during sausage maturation, but there was no effect of AIT on meat pH reduction. E. coli O157:H7 was reduced by 6.5 log(10) CFU/g in sausages containing 750 and 1,000 ppm AIT after 21 and 16 days of processing, respectively. E. coli O157:H7 numbers were reduced by 4.75 log(10) CFU/g after 28 days of processing in treatments with 500 ppm AIT, and the organism was not recovered from this treatment beyond 40 days. During sensory evaluation, sausages containing 500 ppm AIT were considered acceptable although slightly spicy by panelists.     

Paraliobacillus ryukyuensis gen. nov., sp. nov., a new Gram-positive,slightly halophilic,extremely halotolerant,facultative anaerobe isolated from a decomposing marine alga

A slightly halophilic, extremely halotolerant, alkaliphilic, and facultatively anaerobic rod bacterium was isolated from a decomposing marine alga collected in Okinawa, Japan. The isolate, designated O15-7(T), was Gram-positive, endospore-forming, catalase-positive, menaquinone-7-possessing bacterium that is motile by peritrichous flagella. The isolate was an inhabitant of marine environments; the optimum NaCl concentration for growth was 0.75-3.0% (w/v) with a range of 0-22.0%, and the optimum pH was 7.0-8.5 with a range of 5.5-9.5. Catalase was produced in aerobic cultivation but not in anaerobic cultivation. Carbohydrate, sugar alcohol or a related carbon compound was required for growth. In aerobic cultivation, the isolate produced pyruvate, acetate and CO(2) from glucose, and in anaerobic cultivation, it produced lactate, formate, acetate and ethanol with a molar ratio of approximately 2 : 1 : 1 for the last three products. No gas was produced anaerobically. Lactate yield per consumed glucose was markedly affected by the pH of the fermentation medium: 51% at pH 6.5 and 8% at pH 9.0. The cell-wall peptidoglycan contained meso-diaminopimelic acid. Phylogenetically, the isolate occupied an independent lineage within the group composed of the halophilic/halotolerant/alkaliphilic and/or alkalitolerant species in Bacillus rRNA group 1 with the highest 16S rRNA gene sequence similarity of 95.2% to the genus Gracilibacillus. For this isolate, Paraliobacillus ryukyuensis gen. nov., sp. nov. was proposed. The type strain, O15-7(T) (G+C535.6 mol%), has been deposited in the DSMZ, IAM, NBRC, and NRIC (DSM 15140(T)=IAM 15001(T)=NBRC 10001(T)=NRIC 0520(T)).     

The phosphate status of garden soils in relation to soil pH

Summary The phosphate status of 800 garden soils, obtained from various parts of the United Kingdom, as determined by the Morgan extraction method is presented in relation to soil pH.74%–95% of the soils of pH 5 to 5.5, 29%–46% of the soils of pH 6 to 6.5, and 17%–18% of the soils of pH 7 to 8 had a low phosphate status.11%–19% of the soils of pH 6.5 to 8 had a very high phosphate status, indicating over-manuring with respect to phosphate fertilisers.There are indications that the Morgan method is not entirely satisfactory for determining phosphate availability in soils of pH 5.5 or less.     

Effects of pH shifts, bile salts, and glucose on sporulation of Clostridium perfringens NCTC 8798

The sporulation of Clostridium perfringens NCTC 8798 was studied after exposing vegetative cells to: pH values of 1.5 to 8.0 in fluid thioglycolate broth (for 2h) and then transferring them to Duncan-Strong (DS) sporulation medium; sodium cholate or sodium deoxycholate (0.3 to 6.5 mM) in DS medium; or Rhia-Solberg medium with 0.4% (wt/wt) starch, glucose, or both added at 0 to 55 mM. At pH 1.5, no culturable heat-resistant spores were formed. For cells exposed to pH 3.0, 4.0, 5.0, or 6.0, increases in heat-resistant spores were not seen until after a lag of 12 to 13 h, whereas the lag was only 2 to 3 h for cells exposed to pH 7.0 or 8.0. Maximal spore crops were produced after only 6 to 8 h for cells exposed to pH 7 or 8, but 16 to 18 h was required for production of maximal spore crops by cells exposed to the lower-pH media. The addition of sodium cholate (3.5 to 6.5 mM) to DS medium only slightly reduced the culturable heat-resistant spore count from 1.9 X 10(7) to 3 X 10(6)/ml. The addition of 1.8 mM or more sodium deoxycholate reduced the culturable heat-resistant spore count to less than 10/ ml. When either starch or glucose alone was added to Rhia-Solberg medium there was no production of culturable heat-resistant spores, but a combination of 0.4% (wt/wt) starch and 4.4 mM glucose yielded 6 X 10(5) spores/ml. The spore production remained at this level for glucose concentrations of 6 to 22 mM, but then declined to about 3 X 10(3) spores per ml at higher concentrations.