Terminally functionalized thermoresponsive polymer brushes for simultaneously promoting cell adhesion and cell sheet harvest

For preparing cell sheets effectively for cell sheet-based regenerative medicine, cell-adhesion strength to thermoresponsive cell culture surfaces need to be controlled precisely. To design new thermoresponsive surfaces via a terminal modification method, thermoresponsive polymer brush surfaces were fabricated through the surface-initiated reversible addition-fragmentation chain transfer (RAFT) radical polymerization of N-isopropylacrylamide (IPAAm) on glass substrates. The RAFT-mediated grafting method gave dithiobenzoate (DTB) groups to grafted PIPAAm termini, which can be converted to various functional groups. In this study, the terminal carboxylation of PIPAAm chains provided high cell adhesive property to thermoresponsive surfaces. Although cell adhesion is generally promoted by a decrease in the grafted PIPAAm amount, the decrease also decelerated thermally-induced cell detachment, whereas the influence of terminal modification was negligible on the cell detachment. Consequently, the terminally modified PIPAAm brush surfaces allowed smooth muscle cells (SMCs) to simultaneously adhere strongly and detach themselves rapidly. In this study, SMCs were unable to reach a confluent monolayer on as-prepared PIPAAm brush surfaces (grafted amount: 0.41 μg/cm(2)) without terminal carboxylation due to their insufficient cell-adhesion strength. On the other hand, though a decrease in the PIPAAm amount allowed SMCs to form a confluent cell monolayer on the PIPAAm brush surface, the SMCs were unable to be harvested as a monolithic cell sheet by low-temperature culture at 20 °C. Because of their unique property, only terminal-carboxylated PIPAAm brush surfaces achieved rapid harvesting of complete cell sheets by low-temperature culturing.     

N‐isopropylacrylamide‐based thermoresponsive polyelectrolyte multilayer films for human mesenchymal stem cell expansion

Human mesenchymal stem cells (hMSCs) are colony‐forming unit fibroblasts (CFU‐F) derived from adult bone marrow and have significant potential for many cell‐based tissue‐engineering applications. Their therapeutic potential, however, is restricted by their diminishing plasticity as they are expanded in culture. In this study, we used N‐isopropylacrylamide (NIPAM)‐based thermoresponsive polyelectrolyte multilayer (N‐PEMU) films as culture substrates to support hMSC expansion and evaluated their effects on cell properties. The N‐PEMU films were made via layer‐by‐layer adsorption of thermoresponsive monomers copolymerized with charged monomers, positively charged allylamine hydrochloride (PAH), or negatively charged styrene sulfonic acid (PSS) and compared to fetal bovine serum (FBS) coated surfaces. Surface charges were shown to alter the extracellular matrix (ECM) structure and subsequently regulate hMSC responses including adhesion, proliferation, integrin expression, detachment, and colony forming ability. The positively charged thermal responsive surfaces improved cell adhesion and growth in a range comparable to control surfaces while maintaining significantly higher CFU‐F forming ability. Immunostaining and Western blot results indicate that the improved cell adhesion and growth on the positively charged surfaces resulted from the elevated adhesion of ECM proteins such as fibronectin on the positively charge surfaces. These results demonstrate that the layer‐by‐layer approach is an efficient way to form PNIPAM‐based thermal responsive surfaces for hMSC growth and removal without enzymatic treatment. The results also show that surface charge regulates ECM adhesion, which in turn influences not only cell adhesion but also CFU‐forming ability and their multi‐lineage differentiation potential. © 2010 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

Micropatterned thermoresponsive polymer brush surfaces for fabricating cell sheets with well-controlled orientational structures

Newly developed fabrication technique of thermoresponsive surface using RAFT-mediated block copolymerization and photolithography achieved stripe-like micropatterning of poly(N-isopropylacrylamide) (PIPAAm) brush domains and poly(N-isopropylacrylamide)-b-poly(N-acryloylmorpholine) domains. Normal human dermal fibroblasts were aligned on the physicochemically patterned surfaces simply by one-pot cell seeding. Fluorescence images showed the well-controlled orientation of actin fibers and fibronectin in the confluent cell layers with associated extracellular matrix (ECM) on the surfaces. Furthermore, the aligned cells were harvested as a tissue-like cellular monolayer, called "cell sheet" only by reducing temperature below PIPAAm's lower critical solution temperature (LCST) to 20 °C. The cell sheet harvested from the micropatterned surface possessed a different shrinking rate between vertical and parallel sides of the cell alignment (approximately 3:1 of aspect ratio). This indicates that the cell sheet maintains the alignment of cells and related ECM proteins, promising to show the mechanical and biological aspects of cell sheets harvested from the functionalized thermoresponsive surfaces.     

Thermoresponsive protein adsorption of poly(N-isopropylacrylamide)-modified streptavidin on polydimethylsiloxane microchannel surfaces

The control of protein adsorption on microchannel surfaces is important for biosensors. In this study, we demonstrated protein adsorption method that is controlled through temperature change, i.e., thermoresponsive protein adsorption, on polydimethylsiloxane (PDMS) microchannel surfaces using a thermoresponsive polymer, poly(N-isopropylacrylamide) (PNIPAAm). To provide general protein adsorption control method, we adopted biotin-streptavidin chemistry and synthesized streptavidin covalently modified with PNIPAAm (PNIPAAm-StAv). Modification of streptavidin, a hydrophilic protein, with PNIPAAm induced successful thermoresponsive adsorption on a PDMS microchannel surfaces: PNIPAAm-StAv adsorbed at 37 degrees C and desorbed at 10 degrees C on the surfaces. We also demonstrated the thermoresponsive adsorption of biotinylated immunoglobulin G (IgG-b) using PNIPAAm-StAv. Conjugation of IgG-b with PNIPAAm-StAv induced successful thermoresponsive IgG-b adsorption on PDMS. Modification of PDMS surfaces with PNIPAAm reduced physical adsorption of the partially hydrophobic IgG-b on the surface and contributed to the high-contrast thermoresponsive adsorption of IgG-b: less than 1% of the IgG-b adsorbed at 37 degrees C was detected after the PNIPAAm-PDMS surface was washed at 10 degrees C. The controllable adsorption of this system is expected to be applied to the regeneration of biosensor chips and to on-chip protein manipulation.     

Argon-plasma-induced ultrathin thermal grafting of thermoresponsive pNIPAm coating for contractile patterned human SMC sheet engineering

A new method for ultrathin grafting of pNIPAm on PDMS surfaces is introduced that employs plasma activation of the surface followed by thermal polymerization. This method is optimized for human primary SMC attachment and subsequent intact cell sheet detachment by lowering the temperature. The contractile gene expression of the cells showed that the contractile phenotype of the SMCs which is induced by aligning the cells through micropatterning is more preserved after thermoresponsive cell sheet detachment in contrast with enzymatic detachment. Given its simplicity and low cost, this thermoresponsive grafting method can be utilized for engineering patterned cell sheets for future bottom-up tissue engineering techniques.     

Thermoresponsive poly(N-isopropylacrylamide)-based block copolymer coating for optimizing cell sheet fabrication

Thermoresponsive surfaces are prepared via a spin-coating method with a block copolymer consisting of poly(N-isopropylacrylamide) (PIPAAm) and poly(butyl methacrylate) (PBMA) on polystyrene surfaces. The PBMA block suppresses the removal of deposited PIPAAm-based polymers from the surface. The polymer coating affects the temperature-dependent cellular behavior of the surfaces with respect to protein adsorption. By adjusting layer thicknesses, PBMA-b-PIPAAm-coated surfaces are optimized to regulate the adhesion/detachment of cells by temperature changes. Thus, thermoresponsive polymer-coated surfaces are able to harvest contiguous cell sheets with their basal extracellular matrix proteins.     

Heparin-functionalized thermoresponsive surface

Temperature-dependent regulation of affinity binding between bioactive ligands and their cell membrane receptors is an attractive approach for the dynamic control of cellular adhesion, proliferation, migration, differentiation, and signal transduction. Covalent conjugation of bioactive ligands onto thermoresponsive poly(N-isopropylacrylamide) (PIPAAm)-grafted surfaces facilitates the modulation of one-on-one affinity binding between bioactive ligands and cellular receptors by changing temperature. For the dynamic control of the multivalent affinity binding between heparin and heparin-binding proteins, thermoresponsive cell culture surface modified with heparin, which interacts with heparin-binding proteins such as basic fibroblast growth factor (bFGF), has been proposed. Heparin-functionalized thermoresponsive cell culture surface induces (1) the multivalent affinity binding of bFGF in active form and (2) accelerating cell sheet formation in the state of shrunken PIPAAm chains at 37°C. By lowering temperature to 20°C, the affinity binding between bFGF and immobilized heparin is reduced with increasing the mobility of heparin and the swollen PIPAAm chains, leading to the detachment of cultured cells. Therefore, heparin-functionalized thermoresponsive cell culture surface was able to enhance cell proliferation and detach confluent cells as a contiguous cell sheet by changing temperature. A cell cultivation system using heparin-functionalized thermoresponsive cell culture surface is versatile for immobilizing other heparin-binding proteins such as vascular endothelial growth factor, fibronectin, antithrombin III, and hepatocyte growth factor, etc. for tuning the adhesion, growth, and differentiation of various cell species.     

Thermoresponsive micropatterned substrates for single cell studies

We describe the design of micropatterned surfaces for single cell studies, based on thermoresponsive polymer brushes. We show that brushes made of poly(N-isopropylacrylamide) grafted at high surface density display excellent protein and cell anti-adhesive properties. Such brushes are readily patterned at the micron scale via deep UV photolithography. A proper choice of the adhesive pattern shapes, combined with the temperature-dependent swelling properties of PNIPAM, allow us to use the polymer brush as a microactuator which induces cell detachment when the temperature is reduced below [Formula: see text]C.     

聚N-异丙基丙烯酰胺细胞培养平台的研究进展

聚N-异丙基丙烯酰胺(poly(N-isopropylacrylamide),PNIPAAm),温敏性聚合物,可利用其温敏特性替代酶类物质或细胞刮刀用于贴壁细胞的收获,从而有效避免酶解和机械损伤,可为生物医药领域提供品质优良的种子细胞。重点阐述促进细胞有效粘附和快速脱附的温敏性PNIPAAm二维平面的研发情况,包括选取特殊基材、引入亲水基团、调节反应物比率、控制聚合物厚度/密度、提供适宜外力等方式,从而有效改善细胞对温敏性平面的适应性并降低染菌风险以及减少低温处理对细胞的影响。同时介绍PNIPAAm微载体、支架和凝胶等温敏性三维培养介质的研究进展,此方式不仅增加细胞生长面积,更可以模拟体内微环境,从而保持细胞原始生理特征,同时实现大规模扩增和非酶解收获细胞以及组织器官修复和重构的目标。最后简单说明PNIPAAm培养平台的应用,PNIPAAm的研发为再生医学的发展提供了崭新思路。     

Modulation of cell adhesion, proliferation and differentiation on materials designed for body implants

The interaction of cells and tissues with artificial materials designed for applications in biotechnologies and in medicine is governed by the physical and chemical properties of the material surface. There is optimal cell adhesion to moderately hydrophilic and positively charged substrates, due to the adsorption of cell adhesion-mediating molecules (e.g. vitronectin, fibronectin) in an advantageous geometrical conformation, which makes specific sites on these molecules (e.g. specific amino acid sequences) accessible to cell adhesion receptors (e.g. integrins). Highly hydrophilic surfaces prevent the adsorption of proteins, or these molecules are bound very weakly. On highly hydrophobic materials, however, proteins are adsorbed in rigid and denatured forms, hampering cell adhesion. The wettability of the material surface, particularly in synthetic polymers, can be effectively regulated by physical treatments, e.g. by irradiation with ions, plasma or UV light. The irradiation-activated material surface can be functionalized by various biomolecules and nanoparticles, and this further enhances its attractiveness for cells and its effectiveness in regulating cell functions. Another important factor for cell-material interaction is surface roughness and surface topography. Nanostructured substrates (i.e. substrates with irregularities smaller than 100nm), are generally considered to be beneficial for cell adhesion and growth, while microstructured substrates behave more controversially (e.g. they can hamper cell spreading and proliferation but they enhance cell differentiation, particularly in osteogenic cells). A factor which has been relatively less investigated, but which is essential for cell-material interaction, is material deformability. Highly soft and deformable substrates cannot resist the tractional forces generated by cells during cell adhesion, and cells are not able to attach, spread and survive on such materials. Local variation in the physical and chemical properties of the material surface can be advantageously used for constructing patterned surfaces. Micropatterned surfaces enable regionally selective cell adhesion and directed growth, which can be utilized in tissue engineering, in constructing microarrays and in biosensorics. Nanopatterned surfaces are an effective tool for manipulating the type, number, spacing and distribution of ligands for cell adhesion receptors on the material surface. As a consequence, these surfaces are able to control the size, shape, distribution and maturity of focal adhesion plaques on cells, and thus cell adhesion, proliferation, differentiation and other cell functions.     

Substrate Topography Induces a Crossover from 2D to 3D Behavior in Fibroblast Migration

In a three-dimensional environment, cells migrate through complex topographical features. Using microstructured substrates, we investigate the role of substrate topography in cell adhesion and migration. To do so, fibroblasts are plated on chemically identical substrates composed of microfabricated pillars. When the dimensions of the pillars (i.e., the diameter, length, and spacing) are varied, migrating cells encounter alternating flat and rough surfaces that depend on the spacing between the pillars. Consequently, we show that substrate topography affects cell shape and migration by modifying cell-to-substrate interactions. Cells on micropillar substrates exhibit more elongated and branched shapes with fewer actin stress fibers compared with cells on flat surfaces. By analyzing the migration paths in various environments, we observe different mechanisms of cell migration, including a persistent type of migration, that depend on the organization of the topographical features. These responses can be attributed to a spatial reorganization of the actin cytoskeleton due to physical constraints and a preferential formation of focal adhesions on the micropillars, with an increased lifetime compared to that observed on flat surfaces. By changing myosin II activity, we show that actomyosin contractility is essential in the cellular response to micron-scale topographic signals. Finally, the analysis of cell movements at the frontier between flat and micropillar substrates shows that cell transmigration through the micropillar substrates depends on the spacing between the pillars.     

Spreading of mouse fibroblasts on the substrate with multiple spikes

Mouse embryo fibroblasts were cultivated on special substrates with discontinuous surfaces. The substrates were silicon plates with multiple vertical (65-90 microns height) spike-like silicon microcrystals evenly distributed on the plate surfaces. It was shown that the cells were successfully spread and flattened on these substrates. The spread cells formed several discrete attachment zones at the tops and side surfaces of the spikes; these zones were separated from one another by distances considerably greater than the diameter of the unspread cell. At early stages of spreading the unspread cells attached to the tops of single spikes and extended long filopodia attached to the distant spikes. At later stages the lamellae were formed between the filopodia: probably these filopodia served as guidelines for extension of lamellae and progressive cell spreading. These experiments demonstrated that continuity of substrate surface is not a necessary condition for advanced cell spreading.     

Cell sorting technique based on thermoresponsive differential cell adhesiveness

Cell sorting of specific target cells from a mixture of different cell types is a prerequisite for development of functional engineered tissues based on stem-cell and tissue engineering. This paper presents a new method of cell sorting that uses a mixture of thermoresponsive cell-adhesive and non-cell-adhesive substances. The former substance is poly(N-isopropylacrylamide)-grafted gelatin (PNIPAM-gelatin) and the latter is PNIPAM. Graded cell adhesion, produced by mixed coating of these thermoresponsive substances at an appropriate mixing ratio, clearly differentiated the adhesive potentials of two bovine vascular cell types (endothelial cell and smooth muscle cell). The sequential procedures of detachment at room temperature and subsequent replating at 37 degrees C on dishes coated with a mixed coating with the same composition as that employed previously yielded remarkably pure target cells, as determined using confocal laser scanning fluorescence microscopy. This method, leading to harvesting of target cells, is characteristic of simple manipulation with no cell damage. Such advantages are expected to facilitate stem-cell and tissue engineering.     

Studies on cell adhesion and recognition. I. Extent and specificity of cell adhesion triggered by carbohydrate-reactive proteins (glycosidases and lectins) and by fibronectin

The extent and the specificity of the initial cell attachment induced by various proteins coated on plastic surfaces have been studied with the following results: (a) Cell adhesion on the surfaces coated with sialidase and beta-galactosidase was as strong as on concanavalin A and limulus lectin-coated surfaces and the reactions were strongly inhibited by glycosidase inhibitors or by competitive substrates. The adhesion on sialidase was inhibited by 2-deoxy-2,3-dehydro-N- acetylneuraminic acid and by polysialoganglioside (GT1b) at low concentration (0.05-0.1 mM). The cell adhesion on beta-galactosidase coat was inhibited by 1,4-D-galactonolactone and beta-methylgalactoside but not by alpha-methylgalactoside. Thus, the initiation of cell adhesion on glycosidase surfaces could be mediated through the interactions of the specific binding sites of the enzyme surface with the cell surface substrates under physiological conditions. (b) Cell adhesion on various lectins could be blocked by various competing monosaccharides at the concentrations similar to the inhibitory concentrations for binding of lectins from solution to the cells. (c) Cell adhesion on fibronectin surfaces as well as on gelatin-coated surfaces was equally inhibited by GT1b at relatively high concentrations (0.25-0.5 mM). Lower concentrations of GT1b (0.05-0.1 mM) inhibited the cell adhesion on surfaces of Limulus lectin and sialidase. It is suggested that the cell adhesion mediated by fibronectin is based on yet unknown interactions in contrast to a specific cell adhesion through glycosidases and lectins.     

Doubly biomimetic catecholic phosphorylcholine copolymer: a platform strategy for fabricating antifouling surfaces

A doubly biomimetic PMNC polymer bearing cell antifouling phosphorylcholine and mussel adhesive protein catechol groups is synthesized. The polymer can be deposited onto a variety of substrates by dip-coating in an aqueous solution, adhering to surfaces via the catechol functional group while at the same time forming a cell outer membrane mimetic antifouling surface. Contact angle, ATR-FTIR and XPS measurements confirm polymer coating formation on a variety of inorganic and organic substrates. BSA and bovine plasma fibrinogen protein adsorption on PMNC coated surfaces are reduced significantly compared to unmodified substrates, and platelet adhesion from human serum onto the PMNC coated substrate surfaces is highly suppressed in this study.     

The effect of substrate and adsorbed proteins on adhesion, growth and shape of CaCo-2 cells

Extracellular matrix (ECM) proteins play a critical role in many cellular functions, from spreading, migration and proliferation to apoptosis. This role can be altered when proteins of the native ECM are adsorbed to different substrates which cause structural modifications that can influence their biological function. The effects on CaCo-2 cells of laminin-1, fibronectin, collagen-1 and ECM gel adsorbed to glass and to tissue culture polystyrene (PS) were compared in terms of adhesion, proliferation, shapes and spreading of cells in culture. Significant differences between glass and PS surfaces were observed for proliferation and cell shape. Protein surfaces prepared on PS substrates had, in most cases, more pronounced effects on cells than uncoated PS, especially if coated by collagen-1. Adsorbed ECM gel was the most adhesive for cells, but its effect on cell proliferation was not notably different from the controls (glass or PS). These findings indicate that the choice of the substrate can have a significant effect on experimental results and should be taken into consideration when comparing results obtained on different surfaces.     

Regulation of growth and adhesion of cultured cells by insulin conjugated with thermoresponsive polymers

We developed a new biomaterial for use in cell culture. The biomaterial enabled protein-free cell culture and the recovery of viable cells by lowering the temperature without the aid of supplements. Insulin was immobilized and a thermoresponsive polymer was grafted onto a substrate. We investigated the effect of insulin coupling on the lower critical solution temperature (LCST) of the thermoresponsive polymer, poly(N-isopropylacrylamide-co-acrylic acid), using polymers that were ungrafted, or coupled with insulin. The insulin conjugates were precipitated from an aqueous solution at high temperatures, but they were soluble at low temperatures. The LCST was not significantly affected by the insulin coupling. The thermoresponsive polymer was grafted to glow-discharged polystyrene film and covalently conjugated with insulin. The surface wettability of the conjugate film was high at low temperatures and low at high temperatures. The amounts of immobilized insulin required to stimulate cell growth were 1-10% of the amount of free insulin required to produce the same effect. The maximal mitogenic effect of immobilized insulin was greater than that of free insulin. About half of the viable cells was detached from the film only by lowering the temperature. The recovered cells proliferated normally on new culture dishes. (c) 1997 John Wiley & Sons, Inc. Biotechnol Bioeng 53: 339-344, 1997.     

Macrophages form circular zones of very close apposition to IgG-coated surfaces

When phagocytes spread on surfaces coated with ligands such as IgG, they form a tight seal with the substrate. This seal excludes soluble macromolecules in the medium from the interface between the cell and substrate. In contrast, when cells spread on control surfaces that are not coated with ligands, the underside of the cell remains freely accessible to soluble proteins (Wright and Silverstein: Nature 309:359, 1984). We employed reflection-interference microscopy (RIM) to determine where the seal forms during interaction with ligand (IgG)-coated surfaces. Human monocyte-derived macrophages (MO) were plated at 37 degrees C on dinitrophenylated (DNP)-glass coverslips (control substrate), IgM anti-DNP-DNP-coated glass (control substrate), or on IgG anti-DNP-DNP-coated glass (phagocytosis-promoting substrate). Live or fixed cells were examined by RIM. Spreading on control surfaces at 37 degrees C was complete in 25 minutes, whereas spreading on IgG-coated surfaces was maximal within 15 minutes and resulted in cell-substrate contact area 1.6 X that of control cells. Within 1 h at 37 degrees C, 90% of MO that spread on IgG-coated substrates, but not on control substrates, excluded macromolecules from their underside. A minor population of cells (19%) exhibited a uniform iron gray RIM appearance indicating an even, close approach to the substrate. These cells may represent early stages of frustrated phagocytosis. In contrast to cells on control substrates, 70% of cells on IgG-coated substrates developed continuous peripheral dark rings in RIM indicative of close association with the substrate. Essentially all cells with peripheral dark rings in RIM excluded macromolecules from their underside. Enclosed within this ring was an area of greater separation between the cell membrane and the substrate, as indicated by the lighter grey of this region in RIM and by the accessibility of substrate to anti-substrate antibody when breaks in the dark ring occur. Thus, MO can create a closed compartment between plasma membrane and substrate that excludes proteins in the surrounding medium, thereby protecting substances secreted into this space from potentially inhibitory substances in the medium.     

Separation of murine neutrophils and macrophages by thermoresponsive magnetic nanoparticles

Magnetic particles have been used widely in both biotechnological and medical fields, including for immunoassay, enzyme immobilization, drug transport, and immunological diagnosis. Especially particles with bioactive molecules such as antibodies and streptavidin are very useful tools for cell separation. Here we report affinity selection of neutrophils and macrophages from peritoneal inflammatory cells performed by thermoresponsive magnetic nanoparticles conjugated with macrophage-specific anti-F4/80 antibody. The magnetic nanoparticles, which are capped with thermoresponsive polymers, are aggregated by heating the particles over 30 degrees C and show their intrinsic magnetism. The neutrophils are concentrated approximately 90% by these magnetic nanoparticles without any activation, indicating that this novel cell separation method could fulfill a wide range of applications in analysis of the isolation of fragile cells such as neutrophils.     

Covalent surface immobilization of Arg-Gly-Asp- and Tyr-Ile-Gly-Ser-Arg-containing peptides to obtain well-defined cell-adhesive substrates

The synthetic peptides Gly-Arg-Gly-Asp-Tyr and Gly-Tyr-Ile-Gly-Ser-Arg-Tyr, which contain Arg-Gly-Asp (RGD) and Tyr-Ile-Gly-Ser-Arg (YIGSR), the ligands for two important classes of cell adhesion receptors, were covalently coupled to a nonadhesive modified glass surface by the N-terminal Gly. The N-terminal Gly served as a spacer, and the C-terminal Y served as a site for radioiodination. These modified substrates supported the adhesion and spreading of cultured human foreskin fibroblasts (HFFs) independently of adsorbed proteins and, it was demonstrated that a covalently immobilized YIGSR-containing peptide has biological activity. The surface concentration of grafted peptide on the glass was measured by 125I radio-labeling and was 12.1 pmol/cm2. HFFs spread on both immobilized peptide substrates, but at much slower rates on grafted YIGSR glass surfaces than on the RGD-containing substrates. Cells formed focal contacts on the RGD-derivatized substrates in the presence or absence of serum. Focal contacts formed on the YIGSR-grafted surfaces only when serum was present in the medium and had morphologies different from those observed on the RGD-containing substrates. Serum influenced the organization of microfilaments and the extent of spreading of adherent cells, although adsorption of adhesion proteins was minimal on all substrates. This derivatization method produced chemically stable substrates which may be useful in studying receptor-mediated cell adhesion, as the quantity of peptide available at the surface may be precisely measured and controlled.