QTL analysis of agronomic traits in barley based on the doubled haploid progeny of two elite North American varieties representing different germplasm groups

A better understanding of the genetics of complex traits, such as yield, may be achieved by using molecular tools. This study was conducted to estimate the number, genome location, effect and allele phase of QTLs determining agronomic traits in the two North American malting barley (Hordeum vulgare L.) quality variety standards. Using a doubled haploid population of 140 lines from the cross of two-rowed Harrington×six-rowed Morex, agronomic phenotypic data sets from nine environments, and a 107-marker linkage map, we performed QTL analyses using simple interval mapping and simplified composite interval mapping procedures. Thirty-five QTLs were associated, either across environments or in individual environments, with five grain and agronomic traits (yield, kernel plumpness, test weight, heading date, and plant height). Significant QTL×environment interaction was detected for all traits. These interactions resulted from both changes in the magnitude of response and changes in the sign of the allelic effect. QTLs for multiple traits were coincident. The vrs1 locus on chromosome 2 (2H), which determines inflorescence row type, was coincident with the largest-effect QTL determining four traits (yield, kernel plumpness, test weight, and plant height). QTL analyses were also conducted separately for each sub-population (six-rowed and two-rowed). Seven new QTLs were detected in the sub-populations. Positive transgressive segregants were found for all traits, but they were more prevalent in the six-rowed sub-population.QTL analysis should be useful for identifying candidate genes and introgressing favorable alleles between germplasm groups. Received: 18 August 2000 / Accepted: 15 December 2000     

Comparative mapping of QTLs for agronomic traits of rice across environments using a doubled haploid population

We report here the RFLP mapping of quantitative triat loci (QTLs) that affect some important agronomic traits in cultivated rice. An anther culturederived doubled haploid (DH) population was established from a cross between an indica and a japonica rice variety. On the basis of this population a molecular linkage map comprising 137 markers was constructed that covered the rice genome at intervals of 14.8cM on average. Interval mapping of the linkage map was used to locate QTLs for such important agronomic traits as heading date, plant height, number of spikelets per panicle, number of grains Per panicle, 1000-grain weight and percentage of seed set. Evidence of genotype-byenvironment interaction was found by comparing QTL maps of the same population grown in three diverse environments. A total of 22 QTLs for six agronomic traits were detected that were significant in at least one environment, but only 7 were significant in all three environments, 7 were significant in two environments and 8 could only be detected in a single environment. However, QTL-by-environment interaction was traitdependent. QTLs for spikelets and grains per panicle were common across environments, while traits like heading date and plant height were more sensitive to environment.     

Identification of quantitative trait loci for yield and yield components in an advanced backcross population derived from the<Emphasis Type="Italic"> Oryza sativa</Emphasis> variety IR64 and the wild relative<Emphasis Type="Italic"> O. rufipogon</Emphasis>

A BC₂F₂ population developed from an interspecific cross between Oryza sativa (cv IR64) and O. rufipogon (IRGC 105491) was used in an advanced backcross QTL analysis to identify and introduce agronomically useful genes from this wild relative into the cultivated gene pool. The objectives of this study were: (1) to identify putative yield and yield component QTLs that can be useful to improve the elite cultivar IR64; (2) to compare the QTLs within this study with previously reported QTLs in rice as the basis for identifying QTLs that are stable across different environments and genetic backgrounds; and (3) to compare the identified QTLs with previously reported QTLs from maize to examine the degree of QTL conservation across the grass family. Two hundred eighty-five families were evaluated in two field environments in Indonesia, with two replications each, for 12 agronomic traits. A total of 165 markers consisting of 131 SSRs and 34 RFLPs were used to construct the genetic linkage map. By employing interval mapping and composite interval mapping, 42 QTLs were identified. Despite its inferior performance, 33% of the QTL alleles originating from O. rufipogon had a beneficial effect for yield and yield components in the IR64 background. Twenty-two QTLs (53.4%) were located in similar regions as previously reported rice QTLs, suggesting the existence of stable QTLs across genetic backgrounds and environments. Twenty QTLs (47.6%) were exclusively detected in this study, uncovering potentially novel alleles from the wild, some of which might improve the performance of the tropical indica variety IR64. Additionally, several QTLs for plant height, grain weight, and flowering time detected in this study corresponded to homeologous regions in maize containing previously detected maize QTLs for these traits.     

Mapping of QTLs for phosphorus-deficiency tolerance in rice (Oryza sativa L.)

 Phosphorus (P) deficiency of soils is a major yield-limiting factor in rice production. Increasing the P-deficiency tolerance of rice cultivars may represent a more cost-effective solution than relying on fertilizer application. The objective of this study was to identify putative QTLs for P-deficiency tolerance in rice, using 98 backcross inbred lines derived from a japonica×indica cross and genotyped at 245 RFLP marker loci. Lines were grown on P-deficient soil and P uptake, internal P-use efficiency, dry weight, and tiller number were determined. Three QTLs were identified for dry weight and four QTLs for P uptake, together explaining 45.4% and 54.5% of the variation for the respective traits. Peaks for both traits were in good agreement which was to be expected considering the tight correlation of r=0.96 between dry weight and P uptake. For both traits the QTL linked to marker C443 on chromosome 12 had a major effect. Two of the three QTLs detected for internal P-use efficiency, including the major one on chromosome 12, coincided with QTLs for P uptake; however, whereas indica alleles increased P uptake they reduced P-use efficiency. We concluded that this was not due to the tight linkage of two genes in repulsion but rather due to an indirect effect of P uptake on P-use efficiency. Most lines with high use efficiency were characterized by very low P uptake and dry weight and apparently experienced extreme P-deficiency stress. Their higher P-use efficiency was thus the result of highly sub-optimal tissue-P concentrations and did not represent a positive adaptation to low P availability. The number of tillers produced under P deficiency is viewed as an indirect indicator of P-deficiency tolerance in rice. In addition to the major QTL on chromosome 12 already identified for all other traits, two QTLs on chromosome 4 and 12 were identified for tiller number. Their position, however, coincided with QTLs for tiller number reported elsewhere under P-sufficient conditions and therefore appear to be not related to P-deficiency tolerance. In this study P-deficiency tolerance was mainly caused by differences in P uptake and not in P-use efficiency. Using a trait indirectly related to P-deficiency tolerance such as tiller number, we detected a major QTL but none of the minor QTLs detected for P uptake or dry weight. Received: 9 February 1998 / Accepted: 29 April 1998     

Complete genome searches for quantitative trait loci controlling blood pressure and related traits in four segregating populations derived from Dahl hypertensive rats

The Dahl salt-sensitive rat is one of the principal animal models of hereditary hypertension. Genome-wide searches were undertaken to detect quantitative trait loci (QTLs) that influence blood pressure, cardiac mass, and body weight in four F₂ populations derived from Dahl salt-sensitive rats and different inbred normotensive control strains of rat. We detected three QTLs associated with one or more of the phenotypes, using a stringent statistical criterion for linkage (p < 0.00003). These included a novel QTL linked to blood pressure on rat Chromosome (Chr) 12, and another QTL on rat Chr 3 linked to body weight. A QTL on rat Chr 10 for which linkage to blood pressure has been described in other crosses was found to be a principal determinant of blood pressure and cardiac mass in some but not all of the crosses examined here. Three other regions showed evidence of linkage to these phenotypes with a less stringent statistical criterion of linkage at QTLs previously reported in other studies. As part of our study, microsatellite markers have been developed for three candidate genes for investigation in hypertension, and the genes have been localized by linkage mapping. These are: the rat Gs alpha subunit (Gnas) gene, the alpha-1B adrenergic receptor (Adra1b), and the Na⁺, K⁺-ATPase beta2 subunit (Atp1b2) gene. Received: 29 June 1998 / Accepted: 30 October 1998     

Genetic mapping of QTLs affecting tree growth and architecture in Populus: implication for ideotype breeding

 A segregated F₂ progeny derived from two highly divergent poplar species, Populus trichocarpa and P. deltoides, was used to evaluate the genetic basis of canopy structure and function in a clonally replicated plantation. The QTLs of large effect on growth, branch, and leaf traits were identified using the Populus linkage map constructed by 343 molecular markers. Stem height and harvest index appeared to be under the control of few QTLs with major effects, whereas variation in stem basal area, volume, and dry weight might be due to many more QTLs. Branch and leaf traits on sylleptics tended to include more QTLs with major effects than those on proleptics. In the environment where the pedigree was tested, sylleptics were very frequent in the P. trichocarpa parent but rare in the P. deltoides parent. For sylleptic traits for which two or more QTLs were identified, however, increases in the trait values were conditioned not only by the P. trichocarpa alleles, but also by the P. deltoides alleles. Similar findings were found for traits on proleptics that were differently expressed between the two parents. For both sylleptic and proleptic branch types, dominance (ranging from partial to over) was observed. The QTLs on specific linkage groups were found to be responsible for relationships between stem growth and its developmental components. Similar QTL clustering was also observed for morphological or developmental integration in poplar, i.e., traits with similar developmental origins are more strongly correlated with one another than traits with different developmental origins. The implications of these molecular genetic results for ideotype breeding of poplars are discussed. Received: 15 July 1997/Accepted: 19 August 1997     

Genetic dissection of vegetative propagation traits in Eucalyptus tereticornis and E. globulus

We have detected quantitative trait loci (QTLs) affecting vegetative propagation traits in Eucalyptus tereticornis and Eucalyptus globulus. Using amplified fragment length polymorphism (AFLP) genetic linkage maps, the inheritance of 199 markers was assessed in 94 F₁ individuals with extreme adventitious rooting response, and in 221 randomly chosen F₁ individuals. Phenotypes were scored in 1995 and 1996. QTL analyses were performed using chi-square tests (χ²), single-marker analysis (SMA), interval mapping (IM) and composite interval mapping (CIM). All approaches yielded similar QTL detection results. Three QTLs are hypothesized for mortality (MORT=% dead cuttings), nine for adventitious rooting (ROOT, RCT=% rooted cuttings relative to the surviving or total cuttings, respectively), four for petrification (PETR=% surviving unrooted cuttings), one for sprouting ability (SPR=number of stump sprout cuttings harvested in 1995) and four for the stability of adventitious rooting (STAB=absolute value of the difference ROOT95-ROOT96). All putative QTLs for MORT and PETR were located on the E. tereticornis map, and for SPR and STAB on the E. globulus map. We found different QTLs for MORT, ROOT, RCT, SPR and STAB. Putative QTLs accounted for 2.6–17.0% of the phenotypic variance of a trait (R²). Estimated standardized gene substitution effects varied between 0.13 and 0.49 phenotypic standard deviations (σ_p). These results indicate that the phenotypic variation in these traits has a meaningful genetic component and that stable QTLs can be found in a family of reasonable size where no previous knowledge of the trait was available. Received: 1 September 1998 / Accepted: 24 February 1999     

Does function follow form? Principal QTLs for Fusarium head blight (FHB) resistance are coincident with QTLs for inflorescence traits and plant height in a doubled-haploid population of barley

Fusarium head blight (FHB), an important disease of barley in many areas of the world, causes losses in grain yield and quality. Deoxynivalenol (DON) mycotoxin residues, produced by the primary pathogen Fusarium graminearum, pose potential health risks. Barley producers may not be able to profitably market FHB-infected barley, even though it has a low DON level. Three types of FHB resistance have been described in wheat: Type I (penetration), Type II (spread), and Type III (mycotoxin degradation). We describe putative measures of these three types of resistance in barley. In wheat, the three resistance mechanisms show quantitative inheritance. Accordingly, to study FHB resistance in barley, we used quantitative trait locus (QTL) mapping to determine the number, genome location, and effects of QTLs associated with Type-I and -II resistance and the concentration of DON in the grain. We also mapped QTLs for plant height, heading date, and morphological attributes of the inflorescence (seeds per inflorescence, inflorescence density, and lateral floret size). QTL analyses were based on a mapping population of F₁-derived doubled-haploid (DH) lines from the cross of the two-rowed genotypes Gobernadora and CMB643, a linkage map constructed with RFLP marker loci, and field evaluations of the three types of FHB resistance performed in China, Mexico, and two environments in North Dakota, USA. Resistance QTLs were detected in six of the seven linkage groups. Alternate favorable alleles were found at the same loci when different inoculation techniques were used to measure Type-I resistance. The largest-effect resistance QTL (for Type-II resistance) was mapped in the centromeric region of chromosome 2. All but two of the resistance QTLs coincided with QTLs determining morphological attributes of the inflorescence and/or plant height. Additional experiments are needed to determine if these coincident QTLs are due to linkage or pleiotropy and to more clearly define the biological basis of the FHB resistance QTLs. Plant architecture should be considered in FHB resistance breeding efforts, particularly those directed at resistance QTL introgression and/or pyramiding. Received: 22 November 1998 / Accepted: 2 June 1999     

QTL analysis of agronomic traits in recombinant inbred lines of sunflower under partial irrigation

The objective of the present research was to map QTLs associated with agronomic traits such as days from sowing to flowering, plant height, yield and leaf-related traits in a population of recombinant inbred lines (RILs) of sunflower (Helianthus annuus). Two field experiments were conducted with well-irrigated and partially irrigated conditions in randomized complete block design with three replications. A map with 304 AFLP and 191 SSR markers with a mean density of 1 marker per 3.7 cM was used to identify QTLs related to the studied traits. The difference among RILs was significant for all studied traits in both conditions. Three to seven QTLs were found for each studied trait in both conditions. The percentage of phenotypic variance (R ²) explained by QTLs ranged from 4 to 49%. Three to six QTLs were found for each yield-related trait in both conditions. The most important QTL for grain yield per plant on linkage group 13 (GYP-P-13-1) under partial-irrigated condition controls 49% of phenotypic variance (R ²). The most important QTL for 1,000-grain weight (TGW-P-11-1) was identified on linkage group 11. Favorable alleles for this QTL come from RHA266. The major QTL for days from sowing to flowering (DSF-P-14-1) were observed on linkage group 14 and explained 38% of the phenotypic variance. The positive alleles for this QTL come from RHA266. The major QTL for HD (HD-P-13-1) was also identified on linkage group 13 and explained 37% of the phenotypic variance. Both parents (PAC2 and RHA266) contributed to QTLs controlling leaf-related traits in both conditions. Common QTL for leaf area at flowering (LAF-P-12-1, LAF-W-12-1) was detected in linkage group 12. The results emphasise the importance of the role of linkage groups 2, 10 and 13 for studied traits. Genomic regions on the linkage groups 9 and 12 are specific for QTLs of leaf-related traits in sunflower.     

A new semi-dwarfing gene identified by molecular mapping of quantitative trait loci in barley

Semi-dwarfing genes have been widely used in spring barley (Hordeum vulgare L.) breeding programs in many parts of the world, but the success in developing barley cultivars with semi-dwarfing genes has been limited in North America. Exploiting new semi-dwarfing genes may help in solving this dilemma. A recombinant inbred line population was developed by crossing ZAU 7, a semi-dwarf cultivar from China, to ND16092, a tall breeding line from North Dakota. To identify quantitative trait loci (QTL) controlling plant height, a linkage map comprised of 111 molecular markers was constructed. Simple interval mapping was performed for each of the eight environments. A consistent QTL for plant height was found on chromosome 7HL. This QTL is not associated with maturity and rachis internode length. We suggest the provisional name Qph-7H for this QTL. Qph-7H from ZAU 7 reduced plant height to about 3/4 of normal; thus, Qph-7H is considered a semi-dwarfing gene. Other QTLs for plant height were found, but their expression was variable across the eight environments tested.     

3Increasing the source/sink ratio in Vitis vinifera (cv Sangiovese) induces extensive transcriptome reprogramming and modifies berry ripening

Background

The genomic architecture of bud phenology and height growth remains poorly known in most forest trees. In non model species, QTL studies have shown limited application because most often QTL data could not be validated from one experiment to another. The aim of our study was to overcome this limitation by basing QTL detection on the construction of genetic maps highly-enriched in gene markers, and by assessing QTLs across pedigrees, years, and environments.

Results

Four saturated individual linkage maps representing two unrelated mapping populations of 260 and 500 clonally replicated progeny were assembled from 471 to 570 markers, including from 283 to 451 gene SNPs obtained using a multiplexed genotyping assay. Thence, a composite linkage map was assembled with 836 gene markers. For individual linkage maps, a total of 33 distinct quantitative trait loci (QTLs) were observed for bud flush, 52 for bud set, and 52 for height growth. For the composite map, the corresponding numbers of QTL clusters were 11, 13, and 10. About 20% of QTLs were replicated between the two mapping populations and nearly 50% revealed spatial and/or temporal stability. Three to four occurrences of overlapping QTLs between characters were noted, indicating regions with potential pleiotropic effects. Moreover, some of the genes involved in the QTLs were also underlined by recent genome scans or expression profile studies. Overall, the proportion of phenotypic variance explained by each QTL ranged from 3.0 to 16.4% for bud flush, from 2.7 to 22.2% for bud set, and from 2.5 to 10.5% for height growth. Up to 70% of the total character variance could be accounted for by QTLs for bud flush or bud set, and up to 59% for height growth.

Conclusions

This study provides a basic understanding of the genomic architecture related to bud flush, bud set, and height growth in a conifer species, and a useful indicator to compare with Angiosperms. It will serve as a basic reference to functional and association genetic studies of adaptation and growth in Picea taxa. The putative QTNs identified will be tested for associations in natural populations, with potential applications in molecular breeding and gene conservation programs. QTLs mapping consistently across years and environments could also be the most important targets for breeding, because they represent genomic regions that may be least affected by G × E interactions.     

Identifying quantitative trait loci and determining closely related stalk traits for rind penetrometer resistance in a high-oil maize population

Stalk lodging in maize causes annual yield losses between 5 and 20% worldwide. Many studies have indicated that maize stalk strength significantly negatively correlates with lodging observed in the field. Rind penetrometer resistance (RPR) measurements can be used to effectively evaluate maize stalk strength, but little is known about the genetic basis of this parameter. The objective of this study was to explore a genetic model and detect quantitative trait loci (QTL) of RPR and determine relationships between RPR and other stalk traits, especially cell wall chemical components. RPR is quantitative trait in nature, and both additive and non-additive effects may be important to consider for the improvement of RPR. Nine additive-effect QTLs covering nine chromosomes, except chromosome 5, and one pair of epistatic QTLs were detected for RPR. CeSA11 involved in cellulose synthesis and colorless2 involved in lignin synthesis were identified as possible candidate genes for RPR. Internode diameter (InD), fresh weight of internode (FreW), dry weight of internode (DryW), fresh weight and dry weight as well as cell wall components per unit volume significantly positively correlated with RPR. The internode water content (InW) significantly negatively correlated with RPR. Notably, these traits significantly correlated with RPR, and the QTLs of these traits co-localized with those of RPR. The corresponding results obtained from correlation analysis and QTL mapping suggested the presence of pleitropism or linkage between genes and indicated that these different approaches may be used for cross authentication of relationships between different traits.     

np2QTL: networking phenotypic plasticity quantitative trait loci across heterogeneous environments

Despite its critical importance to our understanding of plant growth and adaptation, the question of how environment‐induced plastic response is affected genetically remains elusive. Previous studies have shown that the reaction norm of an organism across environmental index obeys the allometrical scaling law of part‐whole relationships. The implementation of this phenomenon into functional mapping can characterize how quantitative trait loci (QTLs) modulate the phenotypic plasticity of complex traits to heterogeneous environments. Here, we assemble functional mapping and allometry theory through Lokta?Volterra ordinary differential equations (LVODE) into an R‐based computing platform, np²QTL, aimed to map and visualize phenotypic plasticity QTLs. Based on LVODE parameters, np²QTL constructs a bidirectional, signed and weighted network of QTL?QTL epistasis, whose emergent properties reflect the ecological mechanisms for genotype?environment interactions over any range of environmental change. The utility of np²QTL was validated by comprehending the genetic architecture of phenotypic plasticity via the reanalysis of published plant height data involving 3502 recombinant inbred lines of maize planted in multiple discrete environments. np²QTL also provides a tool for constructing a predictive model of phenotypic responses in extreme environments relative to the median environment.     

Identification of putative QTL that underlie yield in interspecific soybean backcross populations

Glycine soja, the wild progenitor of soybean, is a potential source of useful genetic variation in soybean improvement. The objective of our study was to map quantitative trait loci (QTL) from G. soja that could improve the crop. Five populations of BC₂F₄-derived lines were developed using the Glycine max cultivar IA2008 as a recurrent parent and the G. soja plant introduction (PI) 468916 as a donor parent. There were between 57 and 112 BC₂F₄-derived lines in each population and a total of 468 lines for the five populations. The lines were evaluated with simple sequence repeat markers and in field tests for yield, maturity, plant height, and lodging. The field testing was done over 2 years and at two locations each year. Marker data were analyzed for linkage and combined with field data to identify QTL. Using an experimentwise significance threshold of P=0.05, four yield QTL were identified across environments on linkage groups C2, E, K, and M. For these yield QTL, the IA2008 marker allele was associated with significantly greater yield than the marker allele from G. soja. In addition, one lodging QTL, four maturity QTL, and five QTL for plant height were identified across environments. Of the 14 QTL identified, eight mapped to regions where QTL with similar effects were previously mapped. Many regions carrying the yield QTL were also significant for other traits, such as plant height and lodging. When the significance threshold was reduced and the data were analyzed with simple linear regression, four QTL with a positive allele for yield from G. soja were mapped. One epistatic interaction between two genetic regions was identified for yield using an experimentwise significance threshold of P=0.05. Additional research is needed to establish whether multiple trait associations are the result of pleiotropy or genetic linkage and to retest QTL with a positive effect from G. soja.Communicated by H.C. Becker     

Analysis of quantitative trait loci (QTLs) and quantitative trait alleles (QTAs) for potato tuber yield and starch content

 Using RFLP markers, QTLs for tuber starch-content and tuber yield were mapped in two F₁ populations derived from crossing non-inbred di-haploid potato breeding lines. QTLs were identified and mapped, based on both single-marker tests and interval analyses. A model specifically developed for interval QTL analysis in non-inbred plant species was successfully applied for the first time to experimental data. Results of both methods of QTL analysis were similar but not identical. QTLs for tuber starch-content and tuber yield were analysed in segregating populations K31 and LH in five and two environments, respectively. Population K31 was fully genotyped whereas population LH was selectively genotyped according to high and low tuber-starch content. Eighteen putative QTLs for tuber starch-content were identified on all 12 potato linkage groups and eight putative QTLs for tuber yield were identified on eight linkage groups. Twenty of twenty six putative QTLs were reproducibly detected in at least two environments and/or mapping populations. Few major QTLs for tuber starch-content were highly stable across environments but were detected in only one of the two mapping populations analysed. Most QTLs for tuber yield were linked with QTLs for tuber starch-content suggesting that the effects on both traits are controlled by the same genetic factors. The results are discussed with respect to marker-assisted selection in potato. Received: 9 March 1998 / Accepted: 29 April 1998     

Fruit size QTL analysis of an F<Subscript>1</Subscript> population derived from a cross between a domesticated sweet cherry cultivar and a wild forest sweet cherry

Maximizing fruit size is critical for profitable sweet cherry (Prunus avium L.) production. Yet, despite its importance, little is known about the genetic control of fruit size. The objective of this study was to identify quantitative trait loci (QTLs) for fruit size and two essential components of fruit size, mesocarp cell number and size. This study utilized a double pseudo-testcross population derived from reciprocal crosses between a sweet cherry cultivar with ~8 g fruit, “Emperor Francis” (EF), and a wild forest sweet cherry selection with ~2 g fruit, “New York 54” (NY). A total of 190 F₁ progeny previously utilized for the construction of the linkage maps were evaluated in 2006 and 2007 for fruit weight, length, and diameter; mesocarp cell number and length; and pit length and diameter. In 2008, a subset of this population was again evaluated for fruit weight. Correlation analysis revealed that the three fruit size traits were highly correlated with each other, and mesocarp cell number, not cell length, was correlated with fruit size. Three QTLs were identified for each fruit size trait, and one QTL was identified for mesocarp cell number. Fruit size QTLs were found on linkage group 2 on the EF map (EF 2) and linkage groups 2 and 6 on the NY map (NY 2 and NY 6). On EF 2, the cell number QTL clustered with the fruit size QTL, suggesting that the underlying basis of the fruit size increase associated with this QTL was an increase in mesocarp cell number. On NY 6, pit length and diameter QTLs clustered with those for fruit size, suggesting that the underlying morphological basis of this fruit size QTL is the difference in pit size.     

Genotypic variability and stability of poplars and willows grown onnitrate-contaminated soils

Abstract

Phyto-recurrent selection is an established method for selecting tree genotypes for phytoremediation. To identify promising Populus (poplar) and Salix (willow) genotypes for phytotechnologies, our objectives were to (1) evaluate the genotypic variability in survival, height, and diameter of poplar and willow clones established on soils heavily contaminated with nitrates; and (2) assess the genotypic stability in survival and diameter of selected poplar clones after one and eleven growing seasons. We tested 27 poplar and 10 willow clones planted as unrooted cuttings, along with 15 poplar genotypes planted as rooted cuttings. The trees were tested at an agricultural production facility in the Midwestern, United States. After 11 growing seasons, using phyto-recurrent selection, we surveyed survival and measured the diameter of 27 poplar clones (14 unrooted, 13 rooted) that were selected based on superior survival and growth throughout plantation development. Overall, willow exhibited the greatest survival, while poplar had the greatest height and diameter. At 11 years after planting, superior clones were identified that exhibited above-average diameter growth at the establishment- and rotation-age, most of which had stable genotypic performance over time. Selection of specific clones was favorable to genomic groups, based on the geographic location and soil conditions of the site.     

Mapping QTL for climbing ability and component traits in common bean (<Emphasis Type="Italic">Phaseolus vulgaris</Emphasis> L.)

Common bean (Phaseolus vulgaris L.) varies in growth habit from aggressive climbing types to bush beans. Growth habit is determined by a combination of factors including determinate versus indeterminate growth, total plant height, degree of branching and internode length. Together these factors make up climbing ability. The objective of this research was to determine the quantitative trait loci (QTL) controlling climbing ability in a F_5:8 recombinant inbred line population derived from an inter-gene pool cross of an aggressive indeterminate climbing bean with type IV growth habit (G2333) by an indeterminate bush bean of type IIb growth habit (G19839). The population was planted in four randomized complete block design experiments across environments that varied in altitude (from 1,000 to 1,750 masl) and soil fertility (low versus high phosphorus). QTL were identified for plant height, internode length and number of branches per plant on a genetic map covering all common bean linkage groups with a total length of 1,175 cM. In addition a scale was developed to evaluate overall climbing ability and was also used to identify QTL. A total of 7 QTL were found for plant height, 9 for climbing ability, 6 for internode length and 1 for branch number. The largest number and most significant QTL were found on the lower half of linkage group B04 suggesting a major pleiotropic locus for growth habit traits at this location of the genome that is distinct from previously characterized genes which control plant morphology of the crop.     

Molecular mapping of Fusarium head blight resistance in the winter wheat population Dream/Lynx

Fusarium head blight (FHB), mainly caused by Fusarium graminearum and F. culmorum, can significantly reduce the grain quality of wheat (Triticum aestivum L.) due to mycotoxin contamination. The objective of this study was to identify quantitative trait loci (QTLs) for FHB resistance in a winter wheat population developed by crossing the resistant German cultivar Dream with the susceptible British cultivar Lynx. A total of 145 recombinant inbred lines (RILs) were evaluated following spray inoculation with a F. culmorum suspension in field trials in 2002 in four environments across Germany. Based on amplified fragment length polymorphism and simple sequence repeat marker data, a 1,734 cM linkage map was established assuming that the majority of the polymorphic parts of the genome were covered. The area under disease progress curve (AUDPC) was calculated based on the visually scored FHB symptoms. The population segregated quantitatively for FHB severity. Composite interval mapping analysis for means across the environments identified four FHB resistance QTLs on chromosomes 6AL, 1B, 2BL and 7BS. Individually the QTLs explained 19%, 12%, 11% and 21% of the phenotypic variance, respectively, and together accounted for 41%. The QTL alleles conferring resistance on 6AL, 2BL and 7BS originated from cv. Dream. The resistance QTL on chromosome 6AL partly overlapped with a QTL for plant height. The FHB resistance QTL on 7BS coincided with a QTL for heading date, but the additive effect on heading date was of minor importance. The resistance QTL on chromosome 1B was associated with the T1BL.1RS wheat-rye translocation of Lynx.     

Quantitative trait loci for resistance against powdery mildew in a segregating wheat×spelt population

 Powdery mildew is one of the major diseases of wheat in regions with a maritime or semi-continental climate and can strongly affect grain yield. The attempt to control powdery mildew with major resistance genes (Pm genes) has not provided a durable resistance. Breeding for quantitative resistance to powdery mildew is more promising, but is difficult to select on a phenotypic basis. In this study, we mapped and characterised quantitative trait loci (QTLs) for adult-plant powdery mildew resistance in a segregating population of 226 recombinant inbred lines derived from the cross of the Swiss wheat variety Forno with the Swiss spelt variety Oberkulmer. Forno possibly contains the Pm5 gene and showed good adult-plant resistance in the field. Oberkulmer does not have any known Pm gene and showed a moderate susceptible reaction. Powdery mildew resistance was assessed in field trials at two locations in 1995 and at three locations in 1996. The high heritability (h²=0.97) for powdery mildew resistance suggests that the environmental influence did not affect the resistance phenotype to a great extent. QTL analysis was based on a genetic map containing 182 loci with 23 linkage groups (2469 cM). With the method of composite interval mapping 18 QTLs for powdery mildew resistance were detected, explaining 77% of the phenotypic variance in a simultaneous fit. Two QTLs with major effects were consistent over all five environments. One of them corresponds to the Pm5 locus derived from Forno on chromosome 7B. The other QTL on 5A, was derived from the spelt variety Oberkulmer and did not correspond to any known Pm gene. In addition, five QTLs were consistent over three environments, and six QTLs over two environments. The QTL at the Pm5 locus showed a large effect, although virulent races for Pm5 were present in the mixture of isolates. Molecular markers linked with QTLs for adult-plant resistance offer the possibility of simultaneous marker-assisted selection for major and minor genes. Received: 22 September 1998 / Accepted: 26 October 1998