Dissociation and reassembly of Escherichia coli type 1 pili.

Escherichia coli type 1 pili, which mediate the mannose-sensitive adherence of the bacterium to eucaryotic cells, are comprised of very stable arrays of pilin protein subunits (molecular weight, approximately 17,000). Previous methods for the dissociation of pili caused their irreversible denaturation. We have found that incubation of pili in saturated guanidine hydrochloride at 37 degrees C led to their complete dissociation, as evidenced by nephelometry and electron microscopy. Gel chromatography of the dissociated pili on a Sepharose CL-6B column in the presence of saturated guanidine hydrochloride yielded a single protein peak with a molecular weight corresponding to that of pilin. Dialysis of this peak against 5 mM tris(hydroxymethyl)aminomethane hydrochloride (pH 8.0) and rechromatography in the same buffer afforded a major protein peak, probably consisting of pilin dimers. About 25% of the protein in this peak bound to a mannan-sepharose column and could be eluted with methyl alpha-D-mannoside. The pilin dimer gave a single protein band upon polyacrylamide gel electrophoresis in the presence of 0.1% sodium dodecyl sulfate (molecular weight, 16,600) or 10 M urea and penetrated completely into 7% gels in the absence of denaturants. Reassembly of the pilin dimers into pili was achieved upon dialysis against the tris(hydroxymethyl)aminomethane buffer containing 5 mM MgCl2, as observed by electron microscopy. Thus, the conditions used allow renaturation of the dissociated subunits and may aid in further studies of the structure-function relationship of pili.     

Genetic characterization of Escherichia coli type 1 pilus adhesin mutants and identification of a novel binding phenotype

Five Escherichia coli type 1 pilus mutants that had point mutations in fimH, the gene encoding the type 1 pilus adhesin FimH, were characterized. FimH is a minor component of type 1 pili that is required for the pili to bind and agglutinate guinea pig erythrocytes in a mannose-inhibitable manner. Point mutations were located by DNA sequencing and deletion mapping. All mutations mapped within the signal sequence or in the first 28% of the predicted mature protein. All mutations were missense mutations except for one, a frameshift lesion that was predicted to cause the loss of approximately 60% of the mature FimH protein. Bacterial agglutination tests with polyclonal antiserum raised to a LacZ-FimH fusion protein failed to confirm that parental amounts of FimH cross-reacting material were expressed in four of the five mutants. The remaining mutant, a temperature-sensitive (ts) fimH mutant that agglutinated guinea pig erythrocytes after growth at 31 degrees C but not at 42 degrees C, reacted with antiserum at both temperatures in a manner similar to the parent. Consequently, this mutant was chosen for further study. Temperature shift experiments revealed that new FimH biosynthesis was required for the phenotypic change. Guinea pig erythrocyte and mouse macrophage binding experiments using the ts mutant grown at the restrictive and permissive temperatures revealed that whereas erythrocyte binding was reduced to a level comparable to that of a fimH insertion mutant at the restrictive temperature, mouse peritoneal macrophages were bound with parental efficiency at both the permissive and restrictive temperatures. Also, macrophage binding by the ts mutant was insensitive to mannose inhibition after growth at 42 degrees C but sensitive after growth at 31 degrees C. The ts mutant thus binds macrophages with one receptor specificity at 31 degrees C and another at 42 degrees C.     

Characterization of Escherichia coli type 1 pilus mutants with altered binding specificities

PCR mutagenesis and a unique enrichment scheme were used to obtain two mutants, each with a single lesion in fimH, the chromosomal gene that encodes the adhesin protein (FimH) of Escherichia coli type 1 pili. These mutants were noteworthy in part because both were altered in the normal range of cell types bound by FimH. One mutation altered an amino acid at a site previously shown to be involved in temperature-dependent binding, and the other altered an amino acid lining the predicted FimH binding pocket.     

Isolation and characterization of Escherichia coli phase variants and mutants deficient in type 1 pilus production.

Type 1 pili of Escherichia coli are the prototype of the somatic class of pili found on many strains of bacteria. As a first step in the genetic analysis of type 1 piliation, an extensive series of nonpiliated derivatives of E. coli K-12 strain AW405, was characterized to produce attached or free pili when examined in the antiserum or appeared to produce attached or free pili when examined in the electron microscope. The derivatives fell into two classes; phase variants and mutants. Phase variants that formed colonies of two distinctive types, one associated with a predominantly piliated (P+), and the other associated with a nonpiliated (P-) phase, were obtained. Each phase could give rise to the other at a relatively high rate, which was greater in the P- to P+ direction during culture in unshaken liquid medium. In addition, 77 Pil- mutants were selected on the basis of a subtle difference in colonial morphology. The mutants reverted, if at all, at a much lower rate than that of the P- to P+ change. The stability of Pil- derivatives grown in unshaken liquid medium was used as a criterion for distinguishing between phase variants and mutants, Phase variation also effected colonial morphology and chemotactic swarming. These properties did not directly depend upon piliation since Pil- mutants were only slightly altered in colonial form and unaltered in chemotactic swarming. Piliation of Pil+ bacteria was quantitatively affected by growth conditions.     

Genetic complementation analysis of Escherichia coli type 1 somatic pilus mutants.

A genetic complementation analysis of 75 stable nonpiliated mutants of a type 1 piliated strain of Escherichia coli K-12, AW405, was performed. Strains containing pairs of pil mutations were constructed by the infectious transfer of an F101 plasmid containing one pil mutation into E. coli K-12 AW 405 containing another pil mutation. The presence or absence of type 1 pili on the merodiploid strains was determined by agglutination with type 1 pilus antiserum. All 75 mutants fell into one of four complementation groups. The pattern of complementation defined three cistrons involved in pilus formation, pilA, pilB, and pilC. The fourth complementation group was composed of a large number of mutants defective in both pilA and pilB functions.     

禽病原性大肠杆菌1型菌毛的分离与鉴定

以旋涡混合法使禽病原性大肠杆菌分离株566、1794和TK3菌毛脱落,经硫酸铵沉淀、透析后进行蔗糖密度梯度离心,收集密度为110至115g/cm3的蛋白带,经SDSPAGE测定,3株菌菌毛蛋白的分子量分别在175、170和170kD;提纯菌毛保留了甘露糖敏感性凝集豚鼠红细胞的能力,证明它们为1型菌毛;从1794株提取的1型菌毛免疫BALB/C小鼠产生的高免血清在Western blot中与3个菌株的相应菌毛蛋白均呈阳性反应。上述结果表明,受检的3株禽病原性大肠杆菌均表达了1型菌毛,其分子量在175～170kD之间,3个菌株的1型菌毛间具有较强的抗原相关性。     

Purification of the Escherichia coli type 1 pilin and minor pilus proteins and partial characterization of the adhesin protein.

Type 1 pili of Escherichia coli contain three integral minor proteins with apparent molecular weights (Mr) of 28,000 (28K protein), 16,500, and 14,500 attached to rods composed of Mr-17,000 pilin subunits (Hanson and Brinton, Nature [London] 322:265-268). We describe here an improvement on our earlier method of pilus purification, which gives higher yields and higher purity. Also reported are methods allowing fractionation of intact type 1 pili into rods of pure pilin and free minor proteins, as well as fractionation of the 28K tip adhesion protein from the 16.5K and 14.5K proteins. We have determined the amino acid composition and amino-terminal sequence of the adhesion protein. This sequence shows limited homology with the amino-terminal sequences of several E. coli pilins, including type 1.     

Uropathogenic, Escherichia coli can express serologically identical pili of different receptor binding specificities

Uropathogenic Escherichia coli frequently express P-pilus adhesins that recognize Gal alpha (1-4)Gal-containing glycoconjugates. The P-pilus adhesin of the E. coli isolate J96 is encoded by the pap gene cluster and has been shown to agglutinate P1-erythrocytes. We now describe a novel gene cluster from J96, prs, which is responsible for the agglutination of sheep erythrocytes. The structurally related gene clusters both expressed pili exhibiting the F13 antigen. Analysis of mutants of cloned prs sequences, together with trans-complementation of pap and prs genes, identified the sheep-specific adhesin as the 37-kD PrsG protein. The prsG gene occupies the equivalent position in prs as occupied by papG, which specifies the Gal alpha (1-4)Gal-specific adhesin of pap. PrsG was shown to be structurally distinct from PapG since PapG-specific antiserum did not cross-react with PrsG. Using a solid phase glycolipid receptor binding assay, PrsG was found to specify preferential binding to the Forssman antigen, a major constituent of sheep erythrocyte membranes. The binding epitope was identified as the GaINAc alpha (1-3)GaINAc moiety. This is the first direct evidence that serologically identical pili may present antigenically distinct adhesins, each capable of binding to a specific receptor.     

Exploring the 3D molecular architecture of Escherichia coli type 1 pili

An integrated approach combining information gained by Fourier transformation, linear Markham superposition (real space) and mass-per-length measurement by scanning transmission electron microscopy was used to analyze the helical structure of the rod-like type 1 pili expressed by uropathogenic Escherichia coli strain W3110. The 3D reconstruction calculated from the experimental data showed the pili to be 6.9nm wide, right-handed helical tubes with a 19.31(+/-0.34)nm long helical repeat comprising 27 FimA monomers associated head-to-tail in eight turns of the genetic one-start helix. Adjacent turns of the genetic helix are connected via three binding sites making the pilus rod rather stiff. In situ immuno-electron microscopy experiments showed the minor subunit (FimH) mediating pilus adhesion to bladder epithelial cells to be the distal protein of the pilus tip, which had a spring-like appearance at higher magnification. The subunits FimG and FimF connect FimH to the FimA rod, the sequential orientation being FimA-FimF-FimG-FimH. The electron density map calculated at 18A resolution from an atomic model of the pilus rod (built using the pilin domain FimH together with the G1 strand of FimC as a template for FimA and applying the optimal helical parameters determined to the head-to-tail interaction model for pilus assembly) was practically identical with that of the actual 3D reconstruction.     

NMR structure of the Escherichia coli type 1 pilus subunit FimF and its interactions with other pilus subunits

Type 1 pili from uropathogenic Escherichia coli strains mediate bacterial attachment to target receptors on the host tissue. They are composed of up to 3000 copies of the subunit FimA, which form the stiff, helical pilus rod, and the subunits FimF, FimG, and FimH, which form the linear tip fibrillum. All subunits in the pilus interact via donor strand complementation, in which the incomplete immunoglobulin-like fold of each subunit is complemented by insertion of an N-terminal extension from the following subunit. We determined the NMR structure of a monomeric, self-complemented variant of FimF, FimF_F, which has a second FimF donor strand segment fused to its C-terminus that enables intramolecular complementation of the FimF fold. NMR studies on bimolecular complexes between FimF_F and donor strand-depleted variants of FimF and FimG revealed that the relative orientations of neighboring domains in the tip fibrillum cover a wide range. The data provide strong support for the intrinsic flexibility of the tip fibrillum. They lend further support to the hypothesis that this flexibility would significantly increase the probability that the adhesin at the distal end of the fibrillum successfully targets host cell receptors.     

Structural characterization of CFA/III and Longus type IVb pili from enterotoxigenic Escherichia coli

The type IV pili are helical filaments found on many Gram-negative pathogenic bacteria, with multiple diverse roles in pathogenesis, including microcolony formation, adhesion, and twitching motility. Many pathogenic enterotoxigenic Escherichia coli (ETEC) isolates express one of two type IV pili belonging to the type IVb subclass: CFA/III or Longus. Here we show a direct correlation between CFA/III expression and ETEC aggregation, suggesting that these pili, like the Vibrio cholerae toxin-coregulated pili (TCP), mediate microcolony formation. We report a 1.26-Å resolution crystal structure of CofA, the major pilin subunit from CFA/III. CofA is very similar in structure to V. cholerae TcpA but possesses a 10-amino-acid insertion that replaces part of the α2-helix with an irregular loop containing a 3₁₀-helix. Homology modeling suggests a very similar structure for the Longus LngA pilin. A model for the CFA/III pilus filament was generated using the TCP electron microscopy reconstruction as a template. The unique 3₁₀-helix insert fits perfectly within the gap between CofA globular domains. This insert, together with differences in surface-exposed residues, produces a filament that is smoother and more negatively charged than TCP. To explore the specificity of the type IV pilus assembly apparatus, CofA was expressed heterologously in V. cholerae by replacing the tcpA gene with that of cofA within the tcp operon. Although CofA was synthesized and processed by V. cholerae, no CFA/III filaments were detected, suggesting that the components of the type IVb pilus assembly system are highly specific to their pilin substrates.     

Identification and characterization of a gene product that regulates type 1 piliation in Escherichia coli.

The recombinant plasmid pSH2 confers type 1 piliation (Pil+) on a nonpiliated (Pil-) strain of Escherichia coli K-12. At least four plasmid-encoded gene products are involved in pilus biosynthesis and expression. We present evidence which indicates that one gene encodes an inhibitor of piliation. Hyperpiliated (Hyp) mutants were isolated after Tn5 insertion mutagenesis of pSH2 and introduction of the plasmid DNA into a Pil- strain of E. coli as unique small, compact colonies. Also, Hyp mutants clumped during growth in static broth and were piliated under several cultural conditions that normally suppressed piliation. Electron microscopic examination of Hyp mutants associated an observed 40-fold increase in pilin antigen with an increase in the number and length of pili per cell. All Hyp mutants examined failed to produce a 23-kilodalton protein that was encoded by a gene adjacent to the structural (pilin) gene for type 1 pili, and all Tn5 insertion mutations that produced the Hyp phenotype mapped in this region (hyp). Piliation in Hyp mutants could be reduced to near parental levels by introducing a second plasmid containing a parental hyp gene. Thus the 23-kilodalton (hyp) protein appears to act in trans to regulate the level of piliation.     

Escherichia coli 987P pilus: purification and partial characterization

The Escherichia coli somatic pilus, 987P, has been purified after removal by homogenization from a 987P+ enterotoxigenic E. coli. Cell-free pili were precipitated by the addition of MgCl2, collected, and dissolved in MgCl2-free buffer. Five cycles of precipitation and dissolving resulted in a preparation of 987P that was judged to be homogeneous based on electron microscopy and sodium dodecyl sulfate-polyacrylamide gel electrophoresis. In the electron microscope, 987P was rod shaped, having a diameter of 7 nm and an apparent axial hole. Cells and membrane vesicles were not observed in the purified pilus preparation. Electrophoresis of 987P through sodium dodecyl sulfate-polyacrylamide gels resulted in a single band when the sample was denatured in the absence of mercaptoethanol and in two bands when the sample was denatured in the presence of mercaptoethanol. The calculated molecular weight of 987 was variable, depending upon the polyacrylamide concentration and whether mercaptoethanol was included in the denaturing solution. Chemically, 987P is composed primarily of protein but also contains an unidentified amino sugar. The amino terminal amino acid of 987P is alanine and its isoelectric point is pH 3.7. 987P possesses no detectable hemagglutinating activity.     

Identification and characterization of stationary phase inducible genes in Escherichia coli

During transition into stationary phase a large set of proteins is induced in Escherichia coli. Only a minority of the corresponding genes has been identified so far. Using the λplacMu system and a plate screen for carbon starvation-induced fusion activity, a series of chromosomal lacZ fusions (csi::lacZ) was isolated. In complex medium these fusions were induced either during late exponential phase or during entry into stationary phase. csi::lacZ expression in minimal media in response to starvation for carbon, nitrogen and phosphate sources and the roles of global regulators such as the alternative sigma factor sigma;^S (encoded by rpoS), cAMP/CRP and the relA gene product were investigated. The results show that almost every fusion exhibits its own characteristic pattern of expression, suggesting a complex control of stationary phase-inducible genes that involves various combinations of regulatory mechanisms for different genes. All fusions were mapped to the E. coli chromosome. Using fine mapping by Southern hybridization, cloning, sequencing and/or phenotypic analysis, csi-5, csi-17, and csi-18 could be localized in osmY (encoding a periplasmic protein), glpD (aerobic glycerol-3-phosphate dehydrogenase) and glgA (glycogen synthase), respectively. The other fusions seem to specify novel genes now designated csiA through to csiF. csi-17(glpD)::lacZ was shown to produce its own glucose-starvation induction, thus illustrating the Intricacies of gene-fusion technology when applied to the study of gene regulation.     

Structural and functional insights into the assembly of type 1 pili from Escherichia coli

Type 1 pili are filamentous protein complexes that are anchored to the outer membrane of uropathogenic Escherichia coli and mediate bacterial adhesion to the surface of urinary epithelium cells. We review here the current status of structural and functional studies on the assembly of type 1 pili.     

Development of intracellular bacterial communities of uropathogenic Escherichia coli depends on type 1 pili

Uropathogenic Escherichia coli, the predominant causative agent of urinary tract infections, use type 1 pili to bind and invade bladder epithelial cells. Upon entry, the bacteria rapidly replicate and enter a complex developmental pathway ultimately forming intracellular bacterial communities (IBCs), a niche with biofilm-like properties protected from innate defences and antibiotics. Paradoxically, bacteria within IBCs produce type 1 pili, an organelle thought only to be an extracellular colonization factor. Thus, we investigated the function of type 1 pili in IBC development. The cystitis isolate, UTI89, was genetically manipulated for conditional fim expression under control of the tet promoter. In this strain, UTI89-tetR/P(tet) fim, piliation is constitutively inhibited by the tetracycline repressor, TetR. Repression is relieved by anhydrotetracycline (AHT) treatment. UTI89-tetR/P(tet) fim and the isogenic control strain, UTI89-tetR, grown in the presence of AHT, colonized the bladder and invaded the superficial umbrella cells at similar levels at early times in a murine model of infection. However, after invasion UTI89-tetR/P(tet) fim became non-piliated and was unable to form typical IBCs comprised of tightly packed, coccoid-shaped bacteria in contrast to the control strain, UTI89-tetR. Thus, this work changes the extracellular colonization functional paradigm of pili by demonstrating their intracellular role in biofilm formation.     

Structure of common pili from Escherichia coli.

Several important properties of the common pili from Escherichia coli are discussed. These pili were resistant to the gentle Folin-Ciocalteau reagent methods for protein detection and were not readily solubilized by sodium dodecyl sulfate. They were found to contain a reducing sugar but not peptidoglycan. The pilin had multiple conformations in sodium dodecyl sulfate solution, and the appearance of multiple bands on sodium dodecyl sulfate gels did not necessarily indicate heterogeneity of the preparation. The ilus subunit was found to be a different protein than outer membrane III, which has the same apparent molecular weight. In addition, we conformed the results of Brinton (Trans. N.Y. Acad. Sci 27:1003-1054, 1965): that there is a dramatic change in the properties of pili after they are heated at pH values below 2.     

The Product of the fimI gene is necessary for Escherichia coli type 1 pilus biosynthesis

Site-directed mutagenesis was employed to create lesions in fimI, a gene of uncertain function located in the chromosomal gene cluster (fim) involved in Escherichia coli type 1 pilus biosynthesis. Chromosomal fimI mutations produced a piliation-negative phenotype. Complementation analysis indicated that a fimI'-kan insertion mutation and a fimI frameshift mutation produced polarity-like effects not seen with an in-frame fimI deletion mutation. Minicell analysis associated fimI with a 16.4-kDa noncytoplasmic protein product (FimI). We conclude that FimI has a required role in normal pilus biosynthesis.