The Nucleoid Occlusion SlmA Protein Accelerates the Disassembly of the FtsZ Protein Polymers without Affecting Their GTPase Activity

Division site selection is achieved in bacteria by different mechanisms, one of them being nucleoid occlusion, which prevents Z-ring assembly nearby the chromosome. Nucleoid occlusion in E. coli is mediated by SlmA, a sequence specific DNA binding protein that antagonizes FtsZ assembly. Here we show that, when bound to its specific target DNA sequences (SBS), SlmA reduces the lifetime of the FtsZ protofilaments in solution and of the FtsZ bundles when located inside permeable giant vesicles. This effect appears to be essentially uncoupled from the GTPase activity of the FtsZ protofilaments, which is insensitive to the presence of SlmA·SBS. The interaction of SlmA·SBS with either FtsZ protofilaments containing GTP or FtsZ oligomers containing GDP results in the disassembly of FtsZ polymers. We propose that SlmA·SBS complexes control the polymerization state of FtsZ by accelerating the disassembly of the FtsZ polymers leading to their fragmentation into shorter species that are still able to hydrolyze GTP at the same rate. SlmA defines therefore a new class of inhibitors of the FtsZ ring different from the SOS response regulator SulA and from the moonlighting enzyme OpgH, inhibitors of the GTPase activity. SlmA also shows differences compared with MinC, the inhibitor of the division site selection Min system, which shortens FtsZ protofilaments by interacting with the GDP form of FtsZ.     

Deuterium oxide promotes assembly and bundling of FtsZ protofilaments

The assembly and bundling of FtsZ protofilaments play an important role during bacterial cell division. Deuterium oxide (D2O) is known to have strong stabilization effects on the assembly dynamics of several proteins including tubulin, a homologue of FtsZ. Here, we found that D2O enhanced the light-scattering intensity of the assembly reaction, increased sedimentable polymer mass, and induced bundling of FtsZ protofilaments. D2O also increased the stability of FtsZ polymers under challenged GTP conditions and suppressed dilution-induced disassembly of protofilaments. D2O enhances the assembly parameters of FtsZ and microtubules albeit differently. For example, D2O induced bundling of FtsZ protofilaments, whereas it did not induce bundling of microtubules in vitro. In addition, D2O strongly suppressed the GTP hydrolysis rate of microtubules, but it had no effect on the initial rate of GTP hydrolysis of the FtsZ assembly. D2O (80%) also increased the helical content of FtsZ by 25% compared to the helical content of FtsZ in aqueous buffer. D2O was shown to reduce the binding of 4,4'-dianilino-1,1'-binaphthyl-5,5'-disulfonic acid (bis-ANS) to tubulin. In contrast, we found that D2O strongly enhanced the binding of bis-ANS to FtsZ. The results indicated that D2O promotes assembly and bundling of FtsZ protofilaments by increasing hydrophobic interactions between the protofilaments. The results also suggest that the phosphate release rather than the on-site GTP hydrolysis is the rate-limiting step of the GTP turnover reaction.     

Apparent cooperative assembly of the bacterial cell division protein FtsZ demonstrated by isothermal titration calorimetry

The assembly dynamics of FtsZ, a prokaryotic homolog of tubulin, are important for their role in bacterial cytokinesis. Here we used isothermal titration calorimetry (ITC) to measure the heat of FtsZ self-association under various conditions. The measurements were designed to test whether FtsZ protofilaments are assembled by an isodesmic (linear aggregates in which each bond has an identical equilibrium constant) or a cooperative (aggregates only become stable after forming a oligomeric nucleus) assembly process. The isodesmic model can fit the assembly in GDP closely but cannot fit the assembly in GTP. FtsZ-GTP without Mg(2+) exhibits an apparent critical concentration, which is indicative of cooperative assembly, near 2.9 microm. With 2.5 mm Mg(2+) (which allows FtsZ to hydrolyze GTP) the critical concentration is reduced 10-fold to approximately 0.31 microm. Both with and without Mg(2+) there is no evidence for assembly below the critical concentration, but there is an abrupt transition to full assembly above. The ITC data are highly suggestive of a cooperative assembly, although this is difficult to reconcile with the 1-subunit-thick protofilaments observed by electron microscopy.     

Assembly of archaeal cell division protein FtsZ and a GTPase-inactive mutant into double-stranded filaments

We have studied the assembly and GTPase of purified FtsZ from the hyperthermophilic archaeon Methanococcus jannaschii, a structural homolog of eukaryotic tubulin, employing wild-type FtsZ, FtsZ-His6 (histidine-tagged FtsZ), and the new mutants FtsZ-W319Y and FtsZ-W319Y-His6, with light scattering, nucleotide analyses, electron microscopy, and image processing methods. This has revealed novel properties of FtsZ. The GTPase of archaeal FtsZ polymers is suppressed in Na+-containing buffer, generating stabilized structures that require GDP addition for disassembly. FtsZ assembly is polymorphic. Archaeal FtsZ(wt) assembles into associated and isolated filaments made of two parallel protofilaments with a 43 A longitudinal spacing between monomers, and this structure is also observed in bacterial FtsZ from Escherichia coli. The His6 extension facilitates the artificial formation of helical tubes and sheets. FtsZ-W319Y-His6 is an inactivated GTPase whose assembly remains regulated by GTP and Mg2+. It forms two-dimensional crystals made of symmetrical pairs of tubulin-like protofilaments, which associate in an antiparallel array (similarly to the known Ca2+-induced sheets of FtsZ-His6). In contrast to the lateral interactions of microtubule protofilaments, we propose that the primary assembly product of FtsZ is the double-stranded filament, one or several of which might form the dynamic Z ring during prokaryotic cell division.     

The interactions of cell division protein FtsZ with guanine nucleotides

Prokaryotic cell division protein FtsZ, an assembling GTPase, directs the formation of the septosome between daughter cells. FtsZ is an attractive target for the development of new antibiotics. Assembly dynamics of FtsZ is regulated by the binding, hydrolysis, and exchange of GTP. We have determined the energetics of nucleotide binding to model apoFtsZ from Methanococcus jannaschii and studied the kinetics of 2'/3'-O-(N-methylanthraniloyl) (mant)-nucleotide binding and dissociation from FtsZ polymers, employing calorimetric, fluorescence, and stopped-flow methods. FtsZ binds GTP and GDP with K(b) values ranging from 20 to 300 microm(-1) under various conditions. GTP.Mg(2+) and GDP.Mg(2+) bind with slightly reduced affinity. Bound GTP and the coordinated Mg(2+) ion play a minor structural role in FtsZ monomers, but Mg(2+)-assisted GTP hydrolysis triggers polymer disassembly. Mant-GTP binds and dissociates quickly from FtsZ monomers, with approximately 10-fold lower affinity than GTP. Mant-GTP displacement measured by fluorescence anisotropy provides a method to test the binding of any competing molecules to the FtsZ nucleotide site. Mant-GTP is very slowly hydrolyzed and remains exchangeable in FtsZ polymers, but it becomes kinetically stabilized, with a 30-fold slower k(+) and approximately 500-fold slower k(-) than in monomers. The mant-GTP dissociation rate from FtsZ polymers is comparable with the GTP hydrolysis turnover and with the reported subunit turnover in Escherichia coli FtsZ polymers. Although FtsZ polymers can exchange nucleotide, unlike its eukaryotic structural homologue tubulin, GDP dissociation may be slow enough for polymer disassembly to take place first, resulting in FtsZ polymers cycling with GTP hydrolysis similarly to microtubules.     

Ruthenium red-induced bundling of bacterial cell division protein, FtsZ

The assembly of FtsZ plays a major role in bacterial cell division, and it is thought that the assembly dynamics of FtsZ is a finely regulated process. Here, we show that ruthenium red is able to modulate FtsZ assembly in vitro. In contrast to the inhibitory effects of ruthenium red on microtubule polymerization, we found that a substoichiometric concentration of ruthenium red strongly increased the light-scattering signal of FtsZ assembly. Further, sedimentable polymer mass was increased by 1.5- and 2-fold in the presence of 2 and 10 microm ruthenium red, respectively. In addition, ruthenium red strongly reduced the GTPase activity and prevented dilution-induced disassembly of FtsZ polymers. Electron microscopic analysis showed that 4-10 microm of ruthenium red produced thick bundles of FtsZ polymers. The significant increase in the light-scattering signal and pelletable polymer mass in the presence of ruthenium red seemed to be due to the bundling of FtsZ protofilaments into larger polymers rather than the actual increase in the level of polymeric FtsZ. Furthermore, ruthenium red was found to copolymerize with FtsZ, and the copolymerization of substoichiometric amounts of ruthenium red with FtsZ polymers promoted cooperative assembly of FtsZ that produced large bundles. Calcium inhibited the binding of ruthenium red to FtsZ. However, a concentration of calcium 1000-fold higher than that of ruthenium red was required to produce similar effects on FtsZ assembly. Ruthenium red strongly modulated FtsZ polymerization, suggesting the presence of an important regulatory site on FtsZ and suggesting that a natural ligand, which mimics the action of ruthenium red, may regulate the assembly of FtsZ in bacteria.     

Effects of pH and ionic strength on the assembly and bundling of FtsZ protofilaments: a possible role of electrostatic interactions in the bundling of protofilaments

Assembly, bundling and stability of FtsZ protofilaments are important for the formation and functioning of the cytokinetic Z-ring during bacterial division. We found that the bundling of FtsZ protofilaments decreased strongly with increasing pH from 6.0 to 7.9, while the assembly of FtsZ monomers did not decrease considerably. In addition, the disassembly of FtsZ protofilaments was strongly suppressed at pH 6.0 as compared to the elevated pHs. The far-UV circular dichroism spectra of the native FtsZ and the tryptophan emission spectra of mutated FtsZ (Y371W) did not change by increasing pH from 6 to 7.9 indicating that the structure of FtsZ was not altered significantly. Further, the inhibition of bundling of FtsZ protofilaments predominantly, and the inhibition of assembly to a lesser extent by salt indicated that electrostatic interactions are important for the assembly and bundling of FtsZ protofilaments. These observations are supported by the results of computational docking of Escherichia coli dimer structure. The results suggest that the basic intracellular pH (7.4-7.8) of E. coli may play a role in regulating the assembly dynamics of FtsZ in the Z-ring by reducing protofilament stability and bundling in bacterial cytoplasm.     

Straight and curved conformations of FtsZ are regulated by GTP hydrolysis

FtsZ assembles in vitro into protofilaments that can adopt two conformations-the straight conformation, which can assemble further into two-dimensional protofilament sheets, and the curved conformation, which forms minirings about 23 nm in diameter. Here, we describe the structure of FtsZ tubes, which are a variation of the curved conformation. In the tube the curved protofilament forms a shallow helix with a diameter of 23 nm and a pitch of 18 or 24 degrees. We suggest that this shallow helix is the relaxed structure of the curved protofilament in solution. We provide evidence that GTP favors the straight conformation while GDP favors the curved conformation. In particular, exclusively straight protofilaments and protofilament sheets are assembled in GMPCPP, a nonhydrolyzable GTP analog, or in GTP following chelation of Mg, which blocks GTP hydrolysis. Assembly in GDP produces exclusively tubes. The transition from straight protofilaments to the curved conformation may provide a mechanism whereby the energy of GTP hydrolysis is used to generate force for the constriction of the FtsZ ring in cell division.     

The straight and curved conformation of FtsZ protofilaments-evidence for rapid exchange of GTP into the curved protofilament

Bacterial cell division protein FtsZ assembles into protofilaments, which can adopt a straight or curved conformation, similar to its eukaryotic homolog, tubulin. The straight protofilaments can assemble into sheets with a lattice similar to the microtubule wall. The curved protofilaments can form rings when adsorbed to a lipid monolayer, but in solution they form helices. 4 helices assemble together to make a tube, the characteristic polymer of the curved protofilament. GTP favors the straight conformation, while GDP favors the curved. We show here that addition of EDTA and GTP to tubes causes a rapid transformation to straight protofilament sheets. Apparently when the magnesium is chelated the GDP in the curved protofilaments dissociates rapidly and is replaced with GTP, and this GTP induces the transition to straight protofilaments.     

Insights into nucleotide recognition by cell division protein FtsZ from a mant-GTP competition assay and molecular dynamics

Essential cell division protein FtsZ forms the bacterial cytokinetic ring and is a target for new antibiotics. FtsZ monomers bind GTP and assemble into filaments. Hydrolysis to GDP at the association interface between monomers leads to filament disassembly. We have developed a homogeneous competition assay, employing the fluorescence anisotropy change of mant-GTP upon binding to nucleotide-free FtsZ, which detects compounds binding to the nucleotide site in FtsZ monomers and measures their affinities within the millimolar to 10 nM range. We have employed this method to determine the apparent contributions of the guanine, ribose, and the α-, β-, and γ-phosphates to the free energy change of nucleotide binding. Similar relative contributions have also been estimated through molecular dynamics and binding free energy calculations, employing the crystal structures of FtsZ-nucleotide complexes. We find an energetically dominant contribution of the β-phosphate, comparable to the whole guanosine moiety. GTP and GDP bind with similar observed affinity to FtsZ monomers. Loss of the regulatory γ-phosphate results in a predicted accommodation of GDP which has not been observed in the crystal structures. The binding affinities of a series of C8-substituted GTP analogues, known to inhibit FtsZ but not eukaryotic tubulin assembly, correlate with their inhibitory capacity on FtsZ polymerization. Our methods permit testing of FtsZ inhibitors targeting its nucleotide site, as well as compounds from virtual screening of large synthetic libraries. Our results give insight into the FtsZ-nucleotide interactions, which could be useful in the rational design of new inhibitors, especially GTP phosphate mimetics.     

Energetics of the cooperative assembly of cell division protein FtsZ and the nucleotide hydrolysis switch

FtsZ is the first protein recruited to the bacterial division site, where it forms the cytokinetic Z ring. We have determined the functional energetics of FtsZ assembly, employing FtsZ from the thermophilic Archaea Methanococcus jannaschii bound to GTP, GMPCPP, GDP, or GMPCP, under different solution conditions. FtsZ oligomerizes in a magnesium-insensitive manner. FtsZ cooperatively assembles with magnesium and GTP or GMPCPP into large polymers, following a nucleated condensation polymerization mechanism, under nucleotide hydrolyzing and non-hydrolyzing conditions. The effect of temperature on the critical concentration indicates polymer elongation with an apparent heat capacity change of -800 +/- 100 cal mol-1 K-1 and positive enthalpy and entropy changes, compatible with axial hydrophobic contacts of each FtsZ in the polymer, and predicts optimal polymer stability near 75 degrees C. Assembly entails the binding of one medium affinity magnesium ion and the uptake of one proton per FtsZ. Interestingly, GDP- or GMPCP-liganded FtsZ cooperatively form helically curved polymers, with an elongation only 1-2 kcal mol-1 more unfavorable than the straight polymers formed with nucleotide triphosphate, suggesting a physiological requirement for FtsZ polymerization inhibitors. This GTP hydrolysis switch should provide the basic properties for FtsZ polymer disassembly and its functional dynamics.     

Non-hydrolysable GTP-gamma-S stabilizes the FtsZ polymer in a GDP-bound state

FtsZ, a tubulin homologue, forms a cytokinetic ring at the site of cell division in prokaryotes. The ring is thought to consist of polymers that assemble in a strictly GTP-dependent way. GTP, but not guanosine-5'-O-(3-thiotriphosphate) (GTP-gamma-S), has been shown to induce polymerization of FtsZ, whereas in vitro Ca2+ is known to inhibit the GTP hydrolysis activity of FtsZ. We have studied FtsZ dynamics at limiting GTP concentrations in the presence of 10 mM Ca2+. GTP and its non-hydrolysable analogue GTP-gamma-S bind FtsZ with similar affinity, whereas the non-hydrolysable analogue guanylyl-imidodiphosphate (GMP-PNP) is a poor substrate. Preformed FtsZ polymers can be stabilized by GTP-gamma-S and are destabilized by GDP. As more than 95% of the nucleotide associated with the FtsZ polymer is in the GDP form, it is concluded that GTP hydrolysis by itself does not trigger FtsZ polymer disassembly. Strikingly, GTP-gamma-S exchanges only a small portion of the FtsZ polymer-bound GDP. These data suggest that FtsZ polymers are stabilized by a small fraction of GTP-containing FtsZ subunits. These subunits may be located either throughout the polymer or at the polymer ends, forming a GTP cap similar to tubulin.     

SepF increases the assembly and bundling of FtsZ polymers and stabilizes FtsZ protofilaments by binding along its length

SepF (Septum Forming) protein has been recently identified through genetic studies, and it has been suggested to be involved in the division of Bacillus subtilis cells. We have purified functional B. subtilis SepF from the inclusion bodies overexpressed in Escherichia coli. Far-UV circular dichroism and fluorescence spectroscopic analysis involving the extrinsic fluorescent probe 1-anilinonaphthalene-8-sulfonic acid suggested that the purified SepF had characteristics of folded proteins. SepF was found to promote the assembly and bundling of FtsZ protofilaments using three complimentary techniques, namely 90 degrees light scattering, sedimentation, and transmission electron microscopy. SepF also decreased the critical concentration of FtsZ assembly, prevented the dilution-induced disassembly of FtsZ protofilaments, and suppressed the GTPase activity of FtsZ. Further, thick bundles of FtsZ protofilaments were observed using fluorescein isothiocyanate-labeled SepF (FITC-SepF). Interestingly, FITC-SepF was found to be uniformly distributed along the length of the FtsZ protofilaments, suggesting that SepF copolymerizes with FtsZ. SepF formed a stable complex with FtsZ, as evident from the gel filtration analysis. Using a C-terminal tail truncated FtsZ (FtsZDelta16) and a C-terminal synthetic peptide of B. subtilis FtsZ (366-382); we provided evidence indicating that SepF binds primarily to the C-terminal tail of FtsZ. The present work in concert with the available in vivo data support a model in which SepF plays an important role in regulating the assembly dynamics of the divisome complex; therefore, it may have an important role in bacterial cell division.     

Acid-induced loss of functional properties of bacterial cell division protein FtsZ: evidence for an alternative conformation at acidic pH

Several types of bacteria live in highly acidic environments. Since the assembly of FtsZ is important for bacterial cytokinesis, the effects of pH on the assembly and structural properties of FtsZ were examined. FtsZ retained GTP binding ability but lost GTPase activity at pH 2.5. In the presence of GTP, FtsZ formed protofilaments at pH 7 while it formed aggregates instead of protofilaments at pH 2.5, indicating that GTP hydrolysis is important for the assembly of FtsZ into protofilaments. Further, the acid-inactivated state of FtsZ recovered its structural and functional properties upon refolding at pH 7, indicating that the cellular functions of FtsZ may be restored after removal of the external stress. In addition, the affinity of 1-anilinonaphthalene-8-sulfonic acid (ANS) binding to FtsZ was found to be higher at pH 2.5 than at pH 7. FtsZ-ANS complex had a higher quantum yield and lifetime at pH 2.5 than at pH 7. However, the secondary structures of FtsZ were similar at pH 7 and 2.5, indicating that FtsZ attained an alternatively folded state (A) at pH 2.5, which has some characteristics of a molten-globule-like state. The A state was more stable than the native state (N) against urea-induced unfolding. The transition from N to A state involves the formation of aggregates of FtsZ (I). The association of FtsZ monomers occurred in the narrow pH range (3.2-2.8) and it was found to be a fully reversible process. The results suggest that a productive intermediate (I) forms in the acid-induced unfolding pathway of FtsZ and that the unfolding pathway may be minimally described as N <==> I <==> A.     

Behaviour of bacterial division protein FtsZ under a monolayer with phospholipid domains

Assembly of the tubulin-like protein FtsZ at or near the cytoplasmic membrane is one of the earliest steps in division of bacteria such as Escherichia coli. Exactly what constitutes the site at which FtsZ acts is less clear. To investigate the influence of the membrane phospholipids on FtsZ localization and assembly, we have elaborated with the Langmuir technique a two-lipid monolayer made of dilauryl-phosphatidylethanolamine (DLPE) and dipalmitoyl-phosphatidylglycerol (DPPG). This monolayer comprised stable condensed domains in an expanded continuous phase. In the presence of GTP, FtsZ assembly disrupts the condensed domains within 5 min. After several hours, with or without GTP, FtsZ assembled into large aggregates at the domain interface. We suggest that the GTP-induced polymerization of FtsZ is coupled to the association of FtsZ protofilaments with domain interfaces.     

ZipA binds to FtsZ with high affinity and enhances the stability of FtsZ protofilaments

A bacterial membrane protein ZipA that tethers FtsZ to the membrane is known to promote FtsZ assembly. In this study, the binding of ZipA to FtsZ was monitored using fluorescence spectroscopy. ZipA was found to bind to FtsZ with high affinities at three different (6.0, 6.8 and 8.0) pHs, albeit the binding affinity decreased with increasing pH. Further, thick bundles of FtsZ protofilaments were observed in the presence of ZipA under the pH conditions used in this study indicating that ZipA can promote FtsZ assembly and stabilize FtsZ polymers under unfavorable conditions. Bis-ANS, a hydrophobic probe, decreased the interaction of FtsZ and ZipA indicating that the interaction between FtsZ and ZipA is hydrophobic in nature. ZipA prevented the dilution induced disassembly of FtsZ polymers suggesting that it stabilizes FtsZ protofilaments. Fluorescein isothiocyanate-labeled ZipA was found to be uniformly distributed along the length of the FtsZ protofilaments indicating that ZipA stabilizes FtsZ protofilaments by cross-linking them.     

Assembly dynamics of Mycobacterium tuberculosis FtsZ

We have investigated the assembly of FtsZ from Mycobacterium tuberculosis (MtbFtsZ). Electron microscopy confirmed the previous observation that MtbFtsZ assembled into long, two-stranded filaments at pH 6.5. However, we found that assembly at pH 7.2 or 7.7 produced predominantly short, one-stranded protofilaments, similar to those of Escherichia coli FtsZ (EcFtsZ). Near pH 7, which is close to the pH of M. tuberculosis cytoplasm, MtbFtsZ formed a mixture of single- and two-stranded filaments. We developed a fluorescence resonance energy transfer assay to measure the kinetics of initial assembly and the dynamic properties at steady state. Assembly of MtbFtsZ reached a plateau after 60-100 s, about 10 times slower than EcFtsZ. The initial assembly kinetics were similar at pH 6.5 and 7.7, despite the striking difference in the polymer structures. Both were fit with a cooperative assembly mechanism involving a weak dimer nucleus, similar to EcFtsZ but with slower kinetics. Subunit turnover and GTPase at steady state were also about 10 times slower for MtbFtsZ than for EcFtsZ. Specifically, the half-time for subunit turnover in vitro at pH 7.7 was 42 s for MtbFtsZ compared with 5.5 s for EcFtsZ. Photobleaching studies in vivo showed a range of turnover half-times with an average of 25 s for MtbFtsZ as compared with 9 s for EcFtsZ.     

Behaviour of bacterial division protein FtsZ under a monolayer with phospholipid domains

Assembly of the tubulin-like protein FtsZ at or near the cytoplasmic membrane is one of the earliest steps in division of bacteria such as Escherichia coli. Exactly what constitutes the site at which FtsZ acts is less clear. To investigate the influence of the membrane phospholipids on FtsZ localization and assembly, we have elaborated with the Langmuir technique a two-lipid monolayer made of dilauryl-phosphatidylethanolamine (DLPE) and dipalmitoyl-phosphatidylglycerol (DPPG). This monolayer comprised stable condensed domains in an expanded continuous phase. In the presence of GTP, FtsZ assembly disrupts the condensed domains within 5 min. After several hours, with or without GTP, FtsZ assembled into large aggregates at the domain interface. We suggest that the GTP-induced polymerization of FtsZ is coupled to the association of FtsZ protofilaments with domain interfaces.     

Polymerization of Ftsz, a bacterial homolog of tubulin. is assembly cooperative?

FtsZ is a bacterial homolog of tubulin that is essential for prokaryotic cytokinesis. In vitro, GTP induces FtsZ to assemble into straight, 5-nm-wide polymers. Here we show that the polymerization of these FtsZ filaments most closely resembles noncooperative (or "isodesmic") assembly; the polymers are single-stranded and assemble with no evidence of a nucleation phase and without a critical concentration. We have developed a model for the isodesmic polymerization that includes GTP hydrolysis in the scheme. The model can account for the lengths of the FtsZ polymers and their maximum steady state nucleotide hydrolysis rates. It predicts that unlike microtubules, FtsZ protofilaments consist of GTP-bound FtsZ subunits that hydrolyze their nucleotide only slowly and are connected by high affinity longitudinal bonds with a nanomolar K(D).     

Polymerization of nucleotide-free, GDP- and GTP-bound cell division protein FtsZ: GDP makes the difference

Stable, more than 98% nucleotide-free apo-FtsZ was prepared from purified Methanococcus jannaschhi FtsZ. This facilitates the study of the functional mechanisms of this FtsZ, an assembling GTPase, which shares a common fold with eukaryotic tubulin. Apo-FtsZ underwent cooperative magnesium-induced polymerization with a similar critical concentration and morphology related to that of reconstituted GTP-bound FtsZ, suggesting that the binding of GTP contributes insignificantly to the stability of the FtsZ polymers. On the other hand, reconstituted GDP-FtsZ polymerized with a larger critical concentration than GTP-FtsZ, indicating that GDP binding destabilizes FtsZ polymers. Upon GTP hydrolysis by FtsZ polymers, in the absence of a continued GTP supply and under macromolecular crowding conditions enhancing FtsZ polymerization, the straight GTP polymers disappeared and were replaced by characteristic helically curved GDP-bound polymers. These results suggest that the roles of GTP binding and hydrolysis by this archaeal FtsZ are simply to facilitate disassembly. In a physiological situation in GTP excess, GDP-bound FtsZ subunits could again bind GTP, or trigger disassembly, or be recognized by FtsZ filament depolymerizing proteins, allowing the Z-ring dynamics during prokaryotic cell division.