The Cytological Studies on Albuminous Cells in Secondary Phloem of Pinus bungeana

This paper emphatically deals with the ultrastructure of albuminous cells in different stages of development in the secondary phloem of Pinus bungeana. The secondary phloem of Pinus bungeana is composed of sieve cells, axial parenchyma cells, radial plates and rays. Among the constituents, most of upright ray cells and radial plate parenchyma cells are albuminous cells. Although the shape and distribution of this kind of albuminous cells may be different, they possess the following common cytological characteristics. These cells have dense cytoplasm with abundant mitochondria, ribosomes, rough endoplasmic reticula and a large nucleus, the nuclei of some albuminous cells are lobed in shape which increases the outer surface of the nuclei. Usually the albuminous cell contains some starch granules, the quantity of the starch granules in albuminous cells is less than the other parenchyma cells of the secondary phloem. All these cytological characteristics suggest that albuminous cells are active physiologically. The distinguishing characteristics of albuminous cells from other parenchyma ceils are that the albuminous cells are associated with sieve cells through unilateral sieve area and they died together with the sieve cells.     

Anatomy of Secondary Phloem of Glyptostrobus in Relation to Its Systematic Position

A anatomical characters of secondary phloem in Glyptostrobus pensilis (Staunt.)Koch were observed by means of both light and scanning electron microscopy(SEM). The secondary phloem is composed of axial and radial systems. In the axial systems, the phloem consists of sieve cells, phloem parenchyma cells, albuminous cell and phloem fibers. In the radial systems, it consists of phloem rays. The alternate arrangement of different cells in cross section results in tangential bands. The sequence of radial arrangement follows the pattern of sieve cells, phloem parenchyma cells, sieve cells and phloem fibers, sieve cells. Many crystals of calbium oxalate are embedded in the radial walls of seive cells. The phloem fibers are of only one type. The phloem rays are homogeneous, uniseriate. According to the anatomical characters of secondary phloem of Glyptostrobus pensilis (Staunt.)Koch and comparison with the other genera of Taxodiaceae, Glyptostrobus, Metasequoia and Taxodium have close relationships.     

水松的次生韧皮部解剖及其系统位置的讨论

在光学显微镜和扫描电子显微镜下观察,水松茎次生韧皮部的主要特征为：韧皮部由轴向系统和径向系统组成。轴向系统由筛胞、韧皮薄壁组织细胞、蛋白细胞和韧皮纤维组成,径向系统由韧皮射线组成。在横切面上,轴向系统的各组成分子以单层切向带交替有规律的排列,其排列顺序为：筛胞－韧皮薄壁组织细胞－韧皮纤维-筛胞。筛胞的径向壁上嵌埋有草酸钙结晶,韧皮纤维仅一种类型,韧皮射线同型、单列。根据水松茎次生韧皮部的解剖研究,并与杉科其它各属的有关资料进行比较,我们认为：水松属与水杉属和落羽杉属有较近的亲缘关系。     

Comparative Anatomy of Secondary Phloem in Celastraceae

A comparative anatomical study on the secondary phloem of 5-genera, 10 species in Celastraceae was carried out. Based on the phloem structure characters, 3 phloem types were observed. In type Ⅰ , as seen in 5 species of Euonymus, the sieve-tube elements have more inclined end walls and numerous sieve areas (compound sieve plates), phloem rays are almost uniseriate. Type Ⅱ is seen in Celastrus and Tripterygium. It has relatively short sievetube elements, slight inclined end wall and sparse number of sieve areas: the phloem fiber is not lignified and ray is multiseriate. Type Ⅲ is observed in Dipentodon and Perrottetia, the sieve-tube elements are with simple sieve plate, the end wall is almost transverse, there are sclereid and fiber groups in the nonfounctional phloem, and phloem rays are uniseriate or biseriate.     

ONTOGENY AND STRUCTURE OF THE SECONDARY PHLOEM IN EPHEDRA

The secondary phloem in Ephedra is atypical of the gymnosperms in general and exhibits several angiosperm-like characteristics. The ray system of the conducting phloem consists of parenchymatous, multiseriate rays. The axial system contains parenchyma cells, sieve cells, and unusual albuminous cells reminiscent of the specialized parenchyma cells found in some angiosperms. These cell types may intergrade with each other. P-protein in the developing sieve element appears early in the form of a single, ovoid slime body. Later, smaller slime bodies appear and quickly disperse. In the mature sieve element the single, ovoid slime body is lost, and P-protein is then evident in the form of a parietal cylinder, thread-like strands, amorphose globules, or a slime plug. Necrotic-appearing nuclei are commonly found in mature sieve cells.     

Wood Anatomy and the Development of Interxylary Phloem of Ipomoea hederifolia Linn. (Convolvulaceae)

In Ipomoea hederifolia Linn., stems increase in thickness by forming successive rings of cambia. With the increase in stem diameter, the first ring of cambium also gives rise to thin-walled parenchymatous islands along with thick-walled xylem derivatives to its inner side. The size of these islands increases (both radially and tangentially) gradually with the increase in stem diameter. In pencil-thick stems, that is, before the differentiation of a second ring of cambium, some of the parenchyma cells within these islands differentiate into interxylary phloem. Although all successive cambia forms secondary phloem continuously, simultaneous development of interxylary phloem was observed in the innermost successive ring of xylem. In the mature stems, thick-walled parenchyma cells formed at the beginning of secondary growth underwent dedifferentiation and led to the formation of phloem derivatives. Structurally, sieve tube elements showed both simple sieve plates on transverse to slightly oblique end walls and compound sieve plates on the oblique end walls with poorly developed lateral sieve areas. Isolated or groups of two to three sieve elements were noticed in the rays of secondary phloem. They possessed simple sieve plates with distinct companion cells at their corners. The length of these elements was more or less similar to that of ray parenchyma cells but their diameter was slightly less. Similarly, in the secondary xylem, perforated ray cells were noticed in the innermost xylem ring. They were larger than the adjacent ray cells and possessed oval to circular simple perforation plates. The structures of interxylary phloem, perforated ray cells, and ray sieve elements are described in detail.     

Studies on Cytochemistry of Albuminous Ceils in Secondary Phloem of Stem in Pinus bungeana Zucc.

Mature albuminous cells which are connected with differentiated and functional sieve cells show rather high activity of acid phosphatase at pH 5.0. No increased activity could be detected in ordinary ray cells, cambium cells and young albuminous cells contiguous with developing sieve cells. Collapsed albuminous cells show little or none of the activity. With ATP as substrate, enzyme localization is the same as with β-glycerolphosphate. When adenosine triphosphatase activity is visualized at pH 7.2 with ATP as substrate, the highest activity still localized in mature albuminous cells. With the development of young albuminous cells, the enzyme activity is being gradually exhibited, but disappearing when the maturecells begin collapsing. On the other hand, in ordinary ray cells the enzyme activity is ahnost not detectable.     

Anatomical Studies on Secondary Phloem of Euonymus bungeanus

The anatomical structures, especially the type, distribution and arrangement of the constituent elements in the secondary phloem of Euonymus bungeanus Maxim. have been studied. The results showed that the secondary phloem was thicker, consisted of sieve-tube elements, companion ceils ,phloem parenchyma cells ,secretory ceils and rays. Sieve-tube elements, phloem parenchyma cells and secretory cells were alternately arranged in tangential bands, forming a conspicuous zone-like constitution. There was no obvious boundary between the functional phloem and the non-functional phloem. Sieve-tube elements were long, slender cells with very oblique end walls and compound sieve plates. Sieve areas on lateral wall were highly differentiated. Companion cells were triangular in transection and slender in radial section. Mostly,two or three companion cells stayed along with one sieve-tube element. In the functional phloem, phloem parenchyma cells were also slender, containing a few starch grains;but in the nonfunctional phloem they enlarged and contained abundant starch grains. Secretory cells were longer than sieve-tube elements, consisting of rubber-like material. Rays were uniseriate. Finally, the authors also discussed the phylogenetic position of E. bungeanus, which may provide some references for further study of the classification of different genera of Celastraceae.     

杨柳科(Salicaceae)7种植物次生韧皮部的比较研究

本文研究和比较了杨柳科2属7种植物次生韧皮部解剖结构。结果表明:(1)杨属和柳属植物在次生初皮部解剖上有某些共同特征:次生韧皮部具有明显分层现象;韧皮纤维和含晶细胞与筛管分子、伴胞和韧皮薄壁组织细胞是切向带相间排列;筛管分子均为复筛板,端壁倾斜平均含有7-8个筛域。(2)两属植物在射线和晶体类型上有明显区别:柳属植物次生韧皮部无石细胞;杨属植物不具功能韧皮部中含有石细胞。(3)两属植物均有一些较为原始的韧皮部解剖特征。     

Structure and development of sieve areas in leaf veins ofWelwitschia

Summary The sieve areas inWelwitschia are essentially similar to those of coniferous sieve cells, consisting of groups of plasmalemma-lined pores, which are joined in the middle of the wall by a median cavity. The median cavity contains membranes which apparently are connected with aggregates of endoplasmic reticulum bordering the sieve areas. The median cavity is formed through union of smaller median enlargements, the median nodules, each initially associated with a plasmodesma, during perforation of the young sieve area. Callose platelets are not associated with developing pores. All fully-developed pores were lined with callose. The sieve cells are connected with only one other cell type, the albuminous cell. On the sieve-cell side of the wall these connections are similar to sievearea pores, on the albuminous-cell side to plasmodesmata. These connections are also characterized by median enlargements.This work was supported in part by a grant from the South African Council for Scientific and Industrial Research and in part by the U.S. National Science Foundation (GB 31417).     

Observations on albuminous cells in Pinus

Summary Albuminous cells were examined in seasonal collections of secondary phloem of Pinus banksiana, P. resinosa and P. strobus. It was determined that the only reliable criterion for the identification of albuminous cells is their conspicuous connections with sieve cells. Discrete bodies, which give positive protein reactions, were encountered in young albuminous cells. These bodies, which have been interpreted as slime bodies, eventually elongate in the cytoplasm and disappear. During periods of high starch content in other parenchymatous elements, albuminous cells may also contain starch.This research has been supported by National Science Foundation grant GB-3193.     

Computational models evaluating the impact of sieve plates and radial water exchange on phloem pressure gradients

The sugar conducting phloem in angiosperms is a high resistance pathway made up of sieve elements bounded by sieve plates. The high resistance generated by sieve plates may be a trade‐off for promoting quick sealing in the event of injury. However, previous modeling efforts have demonstrated a wide variation in the contribution of sieve plates towards total sieve tube resistance. In the current study, we generated high resolution scanning electron microscope images of sieve plates from balsam poplar and integrated them into a mathematical model using Comsol Multiphysics software. We found that sieve plates contribute upwards of 85% towards total sieve tube resistance. Utilizing the Navier–Stokes equations, we found that oblong pores may create over 50% more resistance in comparison with round pores of the same area. Although radial water flows in phloem sieve tubes have been previously considered, their impact on alleviating pressure gradients has not been fully studied. Our novel simulations find that radial water flow can reduce pressure requirements by half in comparison with modeled sieve tubes with no radial permeability. We discuss the implication that sieve tubes may alleviate pressure requirements to overcome high resistances by regulating their membrane permeability along the entire transport pathway.     

Anatomy of the Secondary Phloem and the Crystalliferous Phloem Fibers in the Stem of Torreya grandis

The structure of the secondary phloem and the development of the crystaleiferous phloem fibers in the stem of Torrey grandis were observed under the ligth microscope and SEM. The secondary phloem is composed of sieve cells, phloem parenchyma cells, crystalliferous phloem fibers and stone cells in the longitudinal system, and the uniserite homogeneous phloem rays consisting of parenchyma cells only in the radial system. In the cross section, there are 3–9 sieve cells in radial rows forming discontinuous tangential layers, the crystalliferous phloem fibers often in a single discontinuous tangential layer and the stone cells dispersed in rangential layer of phloem parenchyma. The developmental process of crystalliferous phloem fibers is as follows: initial cells appeared in the end of April and were well differentiated in the first week of May. Some crystals were deposited in the primary wall, while others were free in the cell. At the end of May, the secondary wall of most crysalliferous phloem fibers started to be thickened. With the thickening of the secondary wall, all the crystals were embedded in the wall from June to August From the end of September to the early days of October, the crystalliferous phloem fibers reached their full maturation. It is shown by microchemical identification and EDAX analysis that the crystals embedded in the wail of crystalliferous phloem fibers are calcium oxalate crystals.     

ULTRASTRUCTURAL FEATURES OF DEVELOPING SIEVE ELEMENTS IN LEMNA MINOR L.—SIEVE PLATE AND LATERAL SIEVE AREAS

Both intact and cut duckweed plants were prepared for electron microscopy. Plants which are prepared intact do not exhibit callose formation during development of sieve-plate pores. Future pore sites can be recognized by the presence of median cavities that are unassociated with callose platelets. These cavities are first seen in the region of the compound middle lamella and are lined by a plasmalemma. As end walls thicken, the cavities increase in size until open pores of uniform width are formed. Mature sieve plates of intact-prepared plants are also devoid of callose. Fully opened pores are lined by a plasmalemma and are only traversed by an occasional tubule of endoplasmic reticulum. Plants which have been cut prior to fixation possess mature sieve plates containing callose. The pores of developing sieve plates in cut plants exhibit small amounts of callose. Except for the lack of callose, lateral wall connections between sieve elements and contiguous cells are similar in development and mature state to those reported for other species.     

ULTRASTRUCTURE OF THE NACREOUS LEPTOIDS (SIEVE ELEMENTS) IN THE POLYTRICHACEOUS MOSS ATRICHUM UNDULATUM

The physiological phloem equivalents, leptoids, of the polytrichaceous moss Atrichum undulatum appear to be similar to the nacreous sieve elements that occur in many higher plants. These leptoids are elongated cells with nacreous thickenings on their radial and tangential walls. Their oblique end walls, which lack such thickenings, are traversed by numerous pores through which the plasmalemma, endoplasmic reticulum, and cytoplasm are continuous between adjacent leptoids of a longitudinal file. These end walls closely resemble the simple sieve areas of the sieve elements found in Polypodium vulgare. The leptoid sieve pores have a median expanded area and frequently are occluded by small amorphous protein plugs at each end. Also, callose was observed as electron-luscent areas both on the faces of the end walls and as a thin cylinder surrounding the lateral area of each pore. Amorphous and granular cytoplasmic contents of the leptoids appear to be morphologically similar to the slime (P-protein) found in the sieve-tube elements of many angiosperms. Differentiating leptoids are characterized by the formation of numerous membrane-bound protein bodies in close association with polysomes and endoplasmic reticulum. As the leptoid matures, the contents of the protein bodies become dispersed in the cytoplasm. Ultrastructurally and ontogenetically the leptoids in the gametophores of A. undulatum appear almost identical to the sieve elements of P. vulgare and therefore should be considered sieve elements rather than phloem-like equivalents.     

Isolation and Characterization of Bacteriophage T4 Base Plates

A method for isolating bacteriophage T4 base plates from lysates of Escherichia coli B cells infected with the ts mutant in gene 19, ts B31 has been developed. By electrophoresis in polyacrylamide gel with sodium dodecyl sulfate the base plates have been shown to contain five to seven protein components with molecular weights of 36,000, 53,000, 66,000, 81,000, 87,000, and probably about 100,000. Electron microscope studies have demonstrated that base plates may occur in two structural states: in the form of hexagons or stars. Star rays and short fibrils are not radial or elongated and are turned sideways at an angle to the radius. Base plates do not complement in vitro with free tail cores isolated after disintegration of particles of the wild-type bacteriophage.     

Anatomy of Gymnosperms Endemic to China,II. Taiwania flousiana Gaussen (Taxodiaceae)

Taiwania Hayata contains two species: T.flousiana Gaussen and T. cryptomerioides Hayata, both endemic to China. T. flousiana was investigated with both light and scanning electron microscopes in respect to shoot apex, external and internal surfaces of leaf cuticle, primary leaf, juvenal and mature leaves, young stem, secondary phloem and wood of stem, etc, It is shown that the shoot apex consists of the following five regions: (1) the apical initials; (2) the protoderm, (3) the subapical moher cells;. (4) the peripheral meristem, and (5) the pith mother cells. The periclinal and anticlinal division of the apical initials takes place with approximately equal frequency. The juvenal leaf is nearly triangular or crescent-shaped in cross section and belongs to the leaf type II. The mature leaf is quadrangular in cross section (the leaf type I). There are a progressive series of changes in size and shape of the leaf cross section. The stoma of the mature leaf is amphicyclic and occasionally tricyclic. The crystals in the juvenal leaf cuticle are more abundant than those in the mature leaf cuticle. The transfusion tissue conforms to the Cupressus type. The structure of juvenal leaf is the nearest to that in Cunninghamia unicanaliculata D. Y. Wang et H. L. Liu, while the mature leaf is similar to that of the Cryptomeria. Sclerenchymatous cells of the hypodermis in the young stem comprise simple layers and are arranged discontinuously. No primary fibers are found in the primary phloem. Medullary sheath is present between the primary xylem and the pith. There are some sclereids in the pith. The secondary phloem of the stem consists of regularly alternate tangential layers of cells in such a sequence: sieve cells, phloem parenchyma cells, sieve cells, phloem fibers, sieve cells. The phloem fiber may be divided into thick-walled and thin-walled phloem fiber. The crystals of calcium oxalate in the radial walls of sieve cells are abundant. Homogeneous phloem rays are uniseriate or partly biseriate, 1-48 (2-13) cells high, and of 26-31 strips per square mm. Growth rings of the wood in Taiwania are distinct. The bordered pits on the radial walls of early wood tracheids are usually uniseriate, occasionally paired and opposite pitting. Wood parenchyma is present, and its cells contain brown resin substances. Their end walls are smooth, lacking nodular thickenings. Wood rays are homogeneous. Cross-field pits are cupressoid. Resin canals are absent. Based on the anatomy of Taiwania and comparison with the other genera of Taxodiaceae, the authors consider the establishment of Taiwaniaceae not reasonable, but rather support the view that the genus is better placed between Cuninghamia and Arthrotaxis in Taxodiaceae.     

Secondary phloem anatomy of Cycadeoidea (Bennettitales)

Secondary phloem anatomy of several species of Cycadeoidea is described from trunks in the Wieland Collection, Peabody Museum of Natural History. The trunks were collected from the Lakota Formation, Lower Cretaceous, Black Hills of South Dakota. Secondary phloem is extensively developed and consists of alternating, tangential bands of fibers and sieve elements, with rare phloem parenchyma. Uniseriate rays, 2-22 cells high, occur between every one to three files of the axial system. Fibers are long, more than 1200 μm, approximately 26.6-34.2 μm in diameter, and have slit-like apertures on the lateral walls. Sieve elements range from 16-25 μm in diameter and are up to 500 μm long. Elliptical sieve areas appear on both end and radial walls and measure 10 μm across; minute spots, which may represent sieve pores, are present within the sieve areas. Secondary phloem of North American Cycadeoidea is similar in organization (alternating tangential bands) and cell types (sieve cells, fibers, axial parenchyma) to that known in other extant and fossil cycadophytes and some seed ferns. The unusual pattern of cell types and thickness of secondary phloem is discussed in the context of plant habit, phloem efficiency, and potential phylogenetic importance.     

High-resolution whole-mount imaging of three-dimensional tissue organization and gene expression enables the study of Phloem development and structure in Arabidopsis

Currently, examination of the cellular structure of plant organs and the gene expression therein largely relies on the production of tissue sections. Here, we present a staining technique that can be used to image entire plant organs using confocal laser scanning microscopy. This technique produces high-resolution images that allow three-dimensional reconstruction of the cellular organization of plant organs. Importantly, three-dimensional domains of gene expression can be analyzed with single-cell precision. We used this technique for a detailed examination of phloem cells in the wild type and mutants. We were also able to recognize phloem sieve elements and their differentiation state in any tissue type and visualize the structure of sieve plates. We show that in the altered phloem development mutant, a hybrid cell type with phloem and xylem characteristics develops from initially normally differentiated protophloem cells. The simplicity of sieve element data collection allows for the statistical analysis of structural parameters of sieve plates, essential for the calculation of phloem conductivity. Taken together, this technique significantly improves the speed and accuracy of the investigation of plant growth and development.     

SEASONAL DEVELOPMENT OF THE SECONDARY PHLOEM IN ACER NEGUNDO

Functional sieve elements are present year-round in the secondary phloem of the trunk of Acer negundo L., the box elder tree. Judging from numerous collections made between May, 1962, and May, 1964, the seasonal cycle of phloem development is as follows: cambial activity and new phloem differentiation begin in late March or early April; xylem differentiation begins about a month later and is completed in most trees in late August. At the time of cessation of cambial activity most of the relatively wide sieve elements of the current season's increment are mature. However, numerous groups of narrow, immature sieve elements and companion cells located on the outer margin of the cambial zone do not reach maturity until fall and winter. By the time of cambial reactivation in spring, most, if not all, of these narrow elements are mature. Some of the sieve elements which reach maturity either shortly after cessation of cambial activity or during dormancy become non-functional within 6 weeks after resumption of cambial activity in spring, while others remain functional until mid-August. For the phloem increment of a given year, cessation of function begins in September with the accumulation of definitive callose on the sieve plates of the first-formed sieve elements and spreads to all but the last-formed ones by the end of December.