Combined use of ESI-MS and UV diode-array detection for localization of disulfide bonds in proteins: application to an alpha-L-fucosidase of pea.

A simplified strategy is described for the assignment of disulfide bonds in proteins of medium to high molecular mass (10-30 kDa). The method combines the use of high-performance liquid chromatography coupled to electrospray ionization mass spectrometry (HPLC-ESI-MS) and HPLC with UV diode-array detection (HPLC diode array). The denatured protein is subjected to proteolysis and the peptide mixture is divided into three fractions: (i) underivatized peptides, (ii) ethylpyridylated peptides, and (iii) reduced and ethylpyridylated peptides. The three peptide ensembles are then subjected to chromatographic and spectroscopic analysis. A systematic methodology is described to analyze the large amount of data obtained. The method was applied to the localization of disulfide bonds in alpha-L-fucosidase from pea. The two disulfide bonds were located between residues Cys64 and Cys109 and between Cys162 and Cys169, while Cys127 was free.     

Mass spectrometric identification of N- and O-glycosylation sites of full-length rat selenoprotein P and determination of selenide-sulfide and disulfide linkages in the shortest isoform

Rat selenoprotein P is an extracellular glycoprotein of 366 amino acid residues that is rich in cysteine and selenocysteine. Plasma contains four isoforms that differ principally by length at the C-terminal end. Mass spectrometry was used to identify sites of glycosylation on the full-length protein. Of the potential N-glycosylation sites, three located at residues 64, 155, and 169 were occupied, while the two at residues 351 and 356 were not occupied. Threonine 346 was variably O-glycosylated. Thus, full-length selenoprotein P is both N- and O-glycosylated. The shortest isoform of selenoprotein P, which terminates at residue 244, was analyzed for selenide-sulfide and disulfide linkages. In this isoform, a single selenocysteine and seven cysteines are present. Mass spectrometric analysis indicated that a selenide-sulfide bond exists between Sec40 and Cys43. Two disulfides were also detected as Cys149-Cys167 and Cys153-Cys156. The finding of a selenide-sulfide bond in the shortest isoform is compatible with a redox function of this pair that might be analogous to the selenol-thiol pair near the C terminus of animal thioredoxin reductase. The disulfide formed by Cys153-Cys156 also has some characteristics of a redox active pair.     

Functional structure of the somatomedin B domain of vitronectin

The N-terminal somatomedin B domain (SMB) of vitronectin binds PAI-1 and the urokinase receptor with high affinity and regulates tumor cell adhesion and migration. We have shown previously in the crystal structure of the PAI-1/SMB complex that SMB, a peptide of 51 residues, is folded as a compact cysteine knot of four pairs of crossed disulfide bonds. However, the physiological significance of this structure was questioned by other groups, who disputed the disulfide bonding shown in the crystal structure (Cys5-Cys21, Cys9-Cys39, Cys19-Cys32, Cys25-Cys31), notably claiming that the first disulfide is Cys5-Cys9 rather than the Cys5-Cys21 bonding shown in the structure. To test if the claimed Cys5-Cys9 bond does exist in the SMB domain of plasma vitronectin, we purified mouse and rat plasma vitronectin that have a Met (hence cleavable by cyanogen bromide) at residue 14, and also prepared recombinant human SMB variants from insect cells with residues Asn14 or Leu24 mutated to Met. HPLC and mass spectrometry analysis showed that, after cyanogen bromide digestion, all the fragments of the SMB derived from mouse or rat vitronectin or the recombinant SMB mutants are still linked together by disulfides, and the N-terminal peptide (residue 1-14 or 1-24) can only be released when the disulfide bonds are broken. This clearly demonstrates that Cys5 and Cys9 of SMB do not form a disulfide bond in vivo, and together with other structural evidence confirms that the only functional structure of the SMB domain of plasma vitronectin is that seen in its crystallographic complex with PAI-1.     

Structural characterization of a rhamnose-binding glycoprotein (lectin) from Spanish mackerel (Scomberomorous niphonius) eggs

A rhamnose-binding glycoprotein (lectin), named SML, was isolated from the eggs of Spanish mackerel (Scomberomorous niphonius) by affinity and ion-exchange chromatographies. SML was composed of a non-covalently linked homodimer. The SML subunit was composed of 201 amino acid residues with two tandemly repeated domains, and contained 8 half-Cys residues in each domain, which is highly homologous to the N-terminal lectin domain of calcium-independent alpha-latrotoxin receptor in mammalian brains. Each domain has the same disulfide bonding pattern; Cys10-Cys40, Cys20-Cys99, Cys54-Cys86 and Cys67-Cys73 were located in the N-terminal domain, and Cys108-Cys138, Cys117-Cys195, Cys152-Cys182 and Cys163-Cys169 were in the C-terminal domain. SML was N-glycosylated at Asn168 in the C-terminal domain. The structure of the sugar chain was determined to be NeuAc-Galbeta1-4GlcNAcbeta1-2Manalpha1-6-(NeuAc-Galbeta1-4GlcNAcbeta1-2Manalpha1-3)Manbeta1-4GlcNAcbeta1-4GlcNAc-Asn.     

Contribution of disulfide bonds to the conformational stability and catalytic activity of ribonuclease A.

Disulfide bonds between the side chains of cysteine residues are the only common crosslinks in proteins. Bovine pancreatic ribonuclease A (RNase A) is a 124-residue enzyme that contains four interweaving disulfide bonds (Cys26-Cys84, Cys40-Cys95, Cys58-Cys110, and Cys65-Cys72) and catalyzes the cleavage of RNA. The contribution of each disulfide bond to the conformational stability and catalytic activity of RNase A has been determined by using variants in which each cystine is replaced independently with a pair of alanine residues. Thermal unfolding experiments monitored by ultraviolet spectroscopy and differential scanning calorimetry reveal that wild-type RNase A and each disulfide variant unfold in a two-state process and that each disulfide bond contributes substantially to conformational stability. The two terminal disulfide bonds in the amino-acid sequence (Cys26-Cys84 and Cys58-Cys110) enhance stability more than do the two embedded ones (Cys40-Cys95 and Cys65-Cys72). Removing either one of the terminal disulfide bonds liberates a similar number of residues and has a similar effect on conformational stability, decreasing the midpoint of the thermal transition by almost 40 degrees C. The disulfide variants catalyze the cleavage of poly(cytidylic acid) with values of kcat/Km that are 2- to 40-fold less than that of wild-type RNase A. The two embedded disulfide bonds, which are least important to conformational stability, are most important to catalytic activity. These embedded disulfide bonds likely contribute to the proper alignment of residues (such as Lys41 and Lys66) that are necessary for efficient catalysis of RNA cleavage.     

Assignment of the disulfide bonds in the sweet protein brazzein

The thermostable sweet protein brazzein consists of 54 amino acid residues and has four intramolecular disulfide bonds, the location of which is unknown. We found that brazzein resists enzymatic hydrolysis at enzyme/substrate ratios (w/w) of 1:100-1:10 at 35–40°C for 24–48 h. Brazzein was hydrolyzed using thermolysin at an enzyme/substrate ratio of 1:1 (w/w) in water, pH 5.5. for 6 h and at 50°C. The disulfide bonds were determined, by a combination of mass spectrometric analysis and amino acid sequencing of cystine-containing peptides, to be between Cys4-Cys52, Cys16-Cys37, Cys22-Cys47, and Cys26-Cys49. These disulfide bonds contribute to its thermostability. © 1996 John Wiley & Sons, Inc.     

The roles of surface loop insertions and disulfide bond in the stabilization of thermophilic WF146 protease

Thermophilic WF146 protease possesses four surface loop insertions and a disulfide bond, resembling its psychrophilic (subtilisins S41 and S39) and mesophilic (subtilisins SSII and sphericase) homologs. Deletion of the insertion 3 (positions 193-197) or insertion 4 (positions 210-221) of WF146 protease resulted in a significant decrease of the enzyme stability. In addition, substitution of the residues Pro211 and Ala212 or residue Glu221 which localized in the vicinity of a Ca(2+) binding site of the enzyme by the corresponding residues in subtilisin S41 remarkably reduced the half-life of the enzyme at 70 degrees C, suggesting that the three residues contributed to the thermostability of the enzyme, probably by enhancing the affinity of enzyme to Ca(2+). In the presence of dithiothreitol, the WF146 protease suffered excessive autolysis, indicating that the Cys52-Cys65 disulfide bond played a critical role in stabilizing the WF146 protease against autolysis. The autolytic cleavage sites of the WF146 protease were identified to locate between residues Asn63-Gly64 and Cys65-Ala66 by N-terminal amino acid analysis of the autolytic product. It was noticed that the effect of the autolytic cleavage at Asn63-Gly64 could be compensated by the disulfide bond Cys52-Cys65 under non-reducing condition, and the disulfide bond cross-linked autolytic product remained active. The apparent stabilization effect of the disulfide bond Cys52-Cys65 in the WF146 protease might provide a rational basis for improving the stability of subtilase against autolysis by protein engineering.     

Glycerol-enhanced detection of a preferential structure latent in unstructured 1SS-variants of lysozyme

Four species of 1SS-varinats of lysozyme were almost unstructured in water, judged from their near-UV CD and (1) H-(15) N-HSQC spectra. Some preferential structure might exist in such a disordered state, but the population of molecules in such a conformation must have been too small to be detected by spectroscopic methods. Indeed, our previous study showed that the addition of 30% glycerol induced the unstructured 2SS-variant of lysozyme to form a native-like structure. To extend this method to more disordered proteins, we attempted to detect some preferential structure latent in unstructured 1SS-variants by the glycerol-enhanced detection. Only in one molecular species of the four 1SS-variants, 1SS[6-127] containing a single disulfide bridge of Cys6-Cys127, a preferential structure was found in the presence of 50% glycerol. It was detected by near-UV CD measurements and the H/D exchange method combined with the NMR spectroscopy. The glycerol-induced structure in 1SS[6-127] was not localized only in the vicinity of Cys6-Cys127, and largely protected regions distributed themselves among A-, B-, and C-helices and Ile55 and Leu56. It was similar to the glycerol-induced structure in 2SS[6-127, 64-80] containing two disulfide bridges of Cys6-Cys127 and Cys64-Cys80, although the former was less rigid than the latter. The role of A-helix (residues 4-15) is proposed as an origin of excellent potential of Cys6-Cys127 for inducing a tertiary structure in the α-domain.     

Controlled syntheses of natural and disulfide-mispaired regioisomers of alpha-conotoxin SI.

Methods are reported for the unambiguous syntheses of all three possible disulfide regioisomers with the sequence of alpha-conotoxin SI, a tridecapeptide amide from marine cone snail venom that binds selectively to the muscle subtype of nicotinic acetylcholine receptors. The naturally occurring peptide has two 'interlocking' disulfide bridges connecting Cys2-Cys7 and Cys3-Cys13 (2/7&3/13), while in the two mispaired isomers the disulfide bridges connect Cys2-Cys13 and Cys3-Cys7 (2/13 & 3/7, 'nested') and Cys2-Cys3 and Cys7-Cys13 (2/3 & 7/13, 'discrete'), respectively. Alignment of disulfide bridges was controlled at the level of orthogonal protection schemes for the linear precursors, assembled by Fmoc solid-phase peptide synthesis on acidolyzable tris(alkoxy)benzylamide (PAL) supports. Side-chain protection of cysteine was provided by suitable pairwise combination of the S-9H-xanthen-9-yl (Xan) and S-acetamidomethyl (Acm) protecting groups. The first disulfide bridge was formed from the corresponding bis(thiol) precursor obtained by selective deprotection of S-Xan, and the second disulfide bridge was formed by orthogonal co-oxidation of S-Acm groups on the remaining two Cys residues. It was possible to achieve the desired alignments with either order of loop formation (smaller loop before larger, or vice versa). The highest overall yields were obtained when both disulfides were formed in solution, while experiments where either the first or both bridges were formed while the peptide was on the solid support revealed lower overall yields and poorer selectivities towards the desired isomers.     

Selectivity of tryptophan residues in mediating photolysis of disulfide bridges in goat alpha-lactalbumin

Goat alpha-lactalbumin (GLA) contains four tryptophan (Trp) residues and four disulfide bonds. Illumination with near-UV light results in the cleavage of disulfide bridges and in the formation of free thiols. To obtain information about the reaction products, the illuminated protein was carbamidomethylated and digested with trypsin and the peptides were analyzed by mass spectrometry. Peptides containing Cys120Cam, Cys61Cam, or Cys91Cam were detected, as well as two peptides containing a new Cys-Lys cross-link. In one, Cys6 was cross-linked to Lys122, while the cross-link in the second was either a Cys91-Lys79 or Cys73-Lys93 cross-link; however, the exact linkage could not be defined. The results demonstrate photolytic cleavage of the Cys6-Cys120, Cys61-Cys77, and Cys73-Cys91 disulfide bonds. While photolysis of Cys6-Cys120 and Cys73-Cys91 disulfide bonds in GLA has been reported, cleavage of the Cys61-Cys77 disulfide bonds has not been previously detected. To examine the contribution of the individual Trp residues, we constructed the GLA mutants, W26F, W60F, W104F, and W118F, by replacing single Trp residues with phenylalanine (Phe). The substitution of each Trp residue led to less thiol production compared to that for wild-type GLA, showing that each Trp residue in GLA contributed to the photolytic cleavage of disulfide bridges. The specificity was expressed by the nature of the reaction products. No cleavage of the Cys6-Cys120 disulfide bridge was detected when the W26F mutant was illuminated, and no cleavage of the Cys73-Cys91 disulfide bridge was seen following illumination of W26F or W104F. In contrast, Cys61Cam, resulting from the cleavage of the Cys61-Cys77 disulfide bridge, was found following illumination of any of the mutants.     

Pi7, an orphan peptide from the scorpion Pandinus imperator: a 1H-NMR analysis using a nano-NMR Probe

The three-dimensional solution structure of a novel peptide, Pi7, purified from the venom of the scorpion Pandinus imperator, and for which no specific receptor has been found yet, was determined by two-dimensional homonuclear proton NMR methods from a nanomole amount of compound using a nano-nmr probe. Pandinus imperator peptide 7 does not block voltage-dependent K(+)-channels and does not displace labeled noxiustoxin from rat brain synaptosomal membranes. The toxin has 38 amino acid residues and, similarly to Pi1, is stabilized by four disulfide bridges (Cys6-Cys27, Cys12-Cys32, Cys16-Cys34, and Cys22-Cys37). In addition, the lysine at position 26 crucial for potassium-channel blocking is replaced in Pi7 by an arginine. Tyrosine 34, equivalent to Tyr36 of ChTX is present, but the N-terminal positions 1 and 2 are occupied by two acidic residues Asp and Glu, respectively. The dihedral angles and distance restraints obtained from measured NMR parameters were used in structural calculations in order to determine the conformation of the peptide. The disulfide-bridge topology was established using distance restraints allowing ambiguous partners between S atoms combined with NMR-derived structural information. The structure is organized around a short alpha-helix spanning residues Thr9 to Thr20/Gly21 and a beta-sheet. These two elements of secondary structure are stabilized by two disulfide bridges, Cys12-Cys32 and Cys16-Cys34. The antiparallel beta-sheet is composed of two strands extending from Asn22 to Cys34 with a tight turn at Ile28-Asn29 in contact with the N-terminal fragment Ile4 to Cys6.     

Identification of the disulfide bonds in the recombinant somatomedin B domain of human vitronectin

The NH(2)-terminal somatomedin B (SMB) domain (residues 1-44) of human vitronectin contains eight Cys residues organized into four disulfide bonds and is required for the binding of type 1 plasminogen activator inhibitor (PAI-1). In the present study, we map the four disulfide bonds in recombinant SMB (rSMB) and evaluate their functional importance. Active rSMB was purified from transformed Escherichia coli by immunoaffinity chromatography using a monoclonal antibody that recognizes a conformational epitope in SMB (monoclonal antibody 153). Plasmon surface resonance (BIAcore) and competitive enzyme-linked immunosorbent assays demonstrate that the purified rSMB domain and intact urea-activated vitronectin have similar PAI-1 binding activities. The individual disulfide linkages present in active rSMB were investigated by CNBr cleavage, partial reduction and S-alkylation, mass spectrometry, and protein sequencing. Two pairs of disulfide bonds at the NH(2)-terminal portion of active rSMB were identified as Cys(5)-Cys(9) and Cys(19)-Cys(21). Selective reduction/S-alkylation of these two disulfide linkages caused the complete loss of PAI-1 binding activity. The other two pairs of disulfide bonds in the COOH-terminal portion of rSMB were identified as Cys(25)-Cys(31) and Cys(32)-Cys(39) by protease-generated peptide mapping of partially reduced and S-alkylated rSMB. These results suggest a linear uncrossed pattern for the disulfide bond topology of rSMB that is distinct from the crossed pattern present in most small disulfide bond-rich proteins.     

Isolation and characterization of disulfide-bonded peptides from the three globular domains of aggregating cartilage proteoglycan

The aggregating cartilage proteoglycan core protein contains two globular domains near the N terminus (G1 and G2) and one near the C terminus (G3). The G1-G3 domains contain 10, 8, and 10 cysteine residues, respectively. The disulfide assignments of the G1 domain have previously been deduced (Neame, P. J., Christner, J. E., and Baker, J. R. (1987) J. Biol. Chem. 262, 17768-17778) as Cys1-Cys2, Cys3-Cys6, Cys4-Cys5, Cys7-Cys10, and Cys8-Cys9, in which the numbers cited after the half-cystine residues are their relative positions from the N terminus. Here we describe a method for the isolation of disulfide-bonded peptides from tryptic digests of bovine nasal cartilage monomer. Sequence analysis of these peptides has allowed us to confirm the pairings previously determined for the G1 domain and to assign a disulfide pattern for the G2 domain of Cys11-Cys14, Cys12-Cys13, Cys15-Cys18, and Cys16-Cys17, in which the Cys15-Cys18 pairing was deduced indirectly. Similarly, for the G3 domain, a pattern of Cys19-Cys20, Cys21-Cys24, Cys22-Cys23, Cys25-Cys27, and Cys26-Cys28 was assigned, in which the Cys22-Cys23 pair was deduced indirectly. The G2 domain therefore contains disulfide bonding which is characteristic of the tandem repeat structures found in the G1 domain and link protein, and the G3 domain contains the three disulfide linkages previously assigned to the family of C-type animal lectins. The method described here, which combines anion-exchange, cation-exchange, and reversed-phase chromatography, should have broad application to the isolation of disulfide-bonded peptides from other heavily glycosylated proteins and proteoglycans.     

A 3-disulfide mutant of mouse prion protein expression, oxidative folding, reductive unfolding, conformational stability, aggregation and isomerization

The structure of wild-type mouse prion protein mPrP(23-231) consists of two distinctive segments with approximately equal size, a disordered and flexible N-terminal domain encompassing residues 23-124 and a largely structured C-terminal domain containing about 40% of helical structure and stabilized by one disulfide bond (Cys(178)-Cys(213)). We have expressed a mPrP mutant with 4 Ala/Ser-->Cys replacements, two each at the N-(Cys(36), Cys(112)) and C-(Cys(134), Cys(169)) domains. Our specific aims are to study the interaction between N- and C-domains of mPrP during the oxidative folding and to produce stabilized isomers of mPrP for further analysis. Oxidative folding of fully reduced mutant, mPrP(6C), generates one predominant 3-disulfide isomer, designated as N-mPrP(3SS), which comprises the native disulfide (Cys(178)-Cys(213)) and two non-native disulfide bonds (Cys(36)-Cys(134) and Cys(112)-Cys(169)) that covalently connect the N- and C-domains. In comparison to wild-type mPrP(23-231), N-mPrP(3SS) exhibits an indistinguishable CD spectra, a similar conformational stability in the absence of thiol and a reduced ability to aggregate. In the presence of thiol catalyst and denaturant, N-mPrP(3SS) unfolds and generates diverse isomers that are amenable to further isolation, structural and functional analysis.     

Isomers of epidermal growth factor with Ser --> Cys mutation at the N-terminal sequence: isomerization, stability, unfolding, refolding, and structure

The structure of human epidermal growth factor (EGF, 53 amino acids) comprises three distinct loops (A, B, and C) connected correspondingly by the three native disulfide bonds, Cys(6)-Cys(20), Cys(14)-Cys(31), and Cys(33)-Cys(42). The connection of Cys(6) and Cys(20) forming the N-terminal A loop is essential for the biological activity of EGF [Barnham et al. (1998) Protein Sci. 7, 1738-1749] and has also been shown to represent a major kinetic trap in the oxidative folding of EGF [Chang et al. (2001) J. Biol. Chem. 276, 4845-4852]. To further understand the chemical nature of this kinetic trap, we have prepared three EGF mutants each with a single Ser --> Cys mutation at Ser residues (Ser(2), Ser(4), and Ser(9)) flanking Cys(6). This allows competition between Cys(6) and mutated Cys(2), Cys(4), and Cys(9) to link with Cys(20) and to form EGF isomers containing different sizes of the A loop. The results show that, in the cases of EGF(S2C) and EGF(S4C), native Cys(6)-Cys(20) is favored over Cys(2)-Cys(20) and Cys(4)-Cys(20) by 4.5- and 9-fold, respectively, in the state of equilibrium. However, in the case of EGF(S9C), a non-native Cys(9)-Cys(20) is thermodynamically more stable than the native Cys(6)-Cys(20) by a free-energy difference (DeltaG degrees ) of 1.12 kcal/mol. Implications of these data in the formation of kinetic trap of EGF folding are discussed. Stabilized isomers of EGF were further generated from denaturation of wild-type and mutant EGF via the method of disulfide scrambling. Properties of these diverse isomers of EGF, including their isomerization, stability, unfolding, refolding, and disulfide structures, are described in this paper.     

Evidence for an initiation site for hen lysozyme folding from the reduced form using its dissected peptide fragments.

We prepared two dissected fragments of hen lysozyme and examined whether or not these two fragments associated to form a native-like structure. One (Fragment I) is the peptide fragment Asn59-homoserine-105 containing Cys64-Cys80 and Cys76-Cys94. The other (Fragment II) is the peptide fragment Lys1-homoserine-58 connected by two disulfide bridges, Cys6-Cys127 and Cys30-Cys115, to the peptide fragment Asn106-Leu129. It was found that the Fragment I immobilized in the cuvette formed an equimolar complex with Fragment II (K(d) = 3.3x10(-4) M at pH 8 and 25 degrees C) by means of surface plasmon resonance. Moreover, from analyses by circular dichroism spectroscopy and ion-exchange chromatography of the mixture of Fragments I and II at pH 8 under non-reducing conditions, it was suggested that these fragments associated to give the native-like structure. However, the mutant Fragment I in which Cys64-Cys80 and Cys76-Cys94 are lacking owing to the mutation of Cys to Ala, or the mutant fragment in which Trp62 is mutated to Gly, did not form the native-like species with Fragment II, because the mutant Fragment I derived from mutant lysozymes had no local conformation due to mutations. Considering our previous results where the preferential oxidation of two inside disulfide bonds, Cys64-Cys80 and Cys76-Cys94, occurred in the refolding of the fully reduced Fragment I, we suggest that the peptide region corresponding to Fragment I is an initiation site for hen lysozyme folding.     

Structural stability of human alpha-thrombin studied by disulfide reduction and scrambling

Human alpha-thrombin is a very important plasma serine protease, which is involved in physiologically vital processes like hemostasis, thrombosis, and activation of platelets. Knowledge regarding the structural stability of alpha-thrombin is essential for understanding its biological regulation. Here, we investigated the structural and conformational stability of alpha-thrombin using the techniques of disulfide reduction and disulfide scrambling. alpha-Thrombin is composed of a light A-chain (36 residues) and a heavy B-chain (259 residues) linked covalently by an inter-chain disulfide bond (Cys(1)-Cys(122)). The B-chain is stabilized by three intra-chain disulfide bonds (Cys(42)-Cys(58), Cys(168)-Cys(182), and Cys(191)-Cys(220)) (Chymotrypsinogen nomenclature). Upon reduction with dithiothreitol (DTT), alpha-thrombin unfolded in a 'sequential' manner with sequential reduction of Cys(168)-Cys(182) within the B-chain followed by the inter-chain disulfide, generating two distinct partially reduced intermediates, I-1 and I-2, respectively. Conformational stability of alpha-thrombin was investigated by the technique of disulfide scrambling. alpha-Thrombin denatures by scrambling its native disulfide bonds in the presence of denaturant [urea, guanidine hydrochloride (GdmCl) or guanidine thiocyanate (GdmSCN)] and a thiol initiator. During the process, cleavage of the inter-chain disulfide bond and release of the A-chain from B-chain was the foremost event. The three disulfides in the B-chain subsequently scrambled to form three major isomers (designated as X-Ba, X-Bb, and X-Bc). Complete denaturation of alpha-thrombin was observed at low concentrations of denaturants (0.5 M GdmSCN, 1.5 M GdmCl, or 3 M urea) indicating low conformational stability of the protease.     

Complete primary structure of a galactose-specific lectin from the venom of the rattlesnake Crotalus atrox. Homologies with Ca2(+)-dependent-type lectins

The complete primary structure of a galactose-specific lectin contained in the venom of the rattlesnake, Crotalus atrox, was determined. The lectin is composed of two covalently linked, identical subunits, each consisting of 135 amino acid residues. Under physiological conditions the lectin proved to be highly aggregated. The venom lectin contained 9 half-cystines, 8 of which formed four intrasubunit disulfide bridges (Cys3-Cys14, Cys31-Cys131, Cys38-Cys133, and Cys106-Cys123), while Cys86 was involved in an intersubunit disulfide bridge. Because of the high content of disulfide bridges, the intact lectin was extremely resistant to tryptic digestion. The determined amino acid sequence was found to be homologous with those of the so-called carbohydrate recognition domains of Ca2(+)-dependent-type lectins in animal. Among them, 8 amino acid residues (Cys31, Gly69, Trp92, Pro97, Cys106, Asp120, Cys123, and Cys131) were completely conserved. Leu40, Trp67, and Trp81 were also well conserved. The rattlesnake venom lectin showed high hemagglutinating activity. These results, together with the occurrence of similar lectins in crotalid venoms, suggest that these lectins have evolved in order to make the venom a more effective weapon to capture prey animals.     

Defining the native disulfide topology in the somatomedin B domain of human vitronectin

The N-terminal 44 amino acid residues of the human plasma glycoprotein vitronectin, known as the somatomedin B (SMB) domain, mediates the interaction between vitronectin and plasminogen activator inhibitor 1 (PAI-1) in a variety of important biological processes. Despite the functional importance of the Cys-rich SMB domain, how its four disulfide bridges are arranged in the molecule remains highly controversial, as evidenced by three different disulfide connectivities reported by several laboratories. Using native chemical ligation and orthogonal protection of selected Cys residues, we chemically synthesized all three topological analogs of SMB with predefined disulfide connectivities corresponding to those previously published. In addition, we oxidatively folded a fully reduced SMB in aqueous solution, and prepared, by CNBr cleavage, the N-terminal segment of 51 amino acid residues of intact vitronectin purified from human blood. Proteolysis coupled with mass spectrometric analysis and functional characterization using a surface plasmon resonance based vitronectin-PAI-1-SMB competition assay allowed us to conclude that 1) only the Cys(5)-Cys(21), Cys(9)-Cys(39), Cys(19)-Cys(32), and Cys(25)-Cys(31) connectivity is present in native vitronectin; 2) only the native disulfide connectivity is functional; and 3) the native disulfide pairings can be readily formed during spontaneous (oxidative) folding of the SMB domain in vitro. Our results unequivocally define the native disulfide topology in the SMB domain of human vitronectin, providing biochemical as well as functional support to the structural findings on a recombinant SMB domain by Read and colleagues (Zhou, A., Huntington, J. A., Pannu, N. S., Carrell, R. W., and Read, R. J. (2003) Nat. Struct. Biol. 10, 541-544).     

Characterisation of the conformational and quaternary structure-dependent heparin-binding region of bovine seminal plasma protein PDC-109

PDC-109, the major heparin-binding protein of bull seminal plasma, binds to sperm choline lipids at ejaculation and modulates capacitation mediated by heparin. Affinity chromatography on heparin-Sepharose showed that polydisperse, but not monomeric, PDC-109 displayed heparin-binding capability. We sought to characterise the surface topology of the quaternary structure-dependent heparin-binding region of PDC-109 by comparing the arginine- and lysine-selective chemical modification patterns of the free and the heparin-bound protein. A combination of reversed-phase peptide mapping of endoproteinase Lys-C-digested PDC-109 derivatives and mass spectrometry was employed to identify modified and heparin-protected residues. PDC-109 contains two tandemly arranged fibronectin type II domains (a, Cys24-Cys61; b, Cys69-Cys109). The results show that six basic residues (Lys34, Arg57, Lys59, Arg64, Lys68, and Arg104) were shielded from reaction with acetic anhydride and 1,2-cyclohexanedione in heparin-bound PDC-109 oligomers. In the 1H-NMR solution structures of single fibronectin type II domains, residues topologically equivalent to PDC-109 Arg57 (Arg104) and Lys59 lay around beta-strand D on the same face of the domain. In full-length PDC-109, Arg64 and Lys68 are both located in the intervening polypeptide between domains a and b. Our data suggest possible quaternary structure arrangements of PDC-109 molecules to form a heparin-binding oligomer.