Efficient plasmid transformation of the beta-lactam producer Streptomyces clavuligerus.

The conditions for optimal formation and regeneration of protoplasts of Streptomyces clavuligerus were established. The optimal temperature for regeneration of protoplasts and for transformation was 26 degrees C in three different regeneration media. The best efficiency of transformation was obtained with 40% polyethylene glycol 1000. The efficiencies of regeneration and transformation increased greatly when protoplasts were obtained from cultures in the early stationary phase of growth. The number of transformants per assay increased linearly with rising concentrations of protoplasts. However, the number of transformants per protoplast decreased at concentrations of protoplasts above 1.5 X 10(9). The total number of transformants rose linearly at increasing plasmid DNA concentrations, but the number of the transformants per microgram of DNA became constant at concentrations above 1 microgram of DNA. Transformation frequencies as high as 5 X 10(5) transformants per microgram of DNA were obtained when plasmid pIJ702 was isolated from S. clavuligerus but not when isolated from Streptomyces lividans.     

Efficient plasmid transformation of the beta-lactam producer Streptomyces clavuligerus

The conditions for optimal formation and regeneration of protoplasts of Streptomyces clavuligerus were established. The optimal temperature for regeneration of protoplasts and for transformation was 26 degrees C in three different regeneration media. The best efficiency of transformation was obtained with 40% polyethylene glycol 1000. The efficiencies of regeneration and transformation increased greatly when protoplasts were obtained from cultures in the early stationary phase of growth. The number of transformants per assay increased linearly with rising concentrations of protoplasts. However, the number of transformants per protoplast decreased at concentrations of protoplasts above 1.5 X 10(9). The total number of transformants rose linearly at increasing plasmid DNA concentrations, but the number of the transformants per microgram of DNA became constant at concentrations above 1 microgram of DNA. Transformation frequencies as high as 5 X 10(5) transformants per microgram of DNA were obtained when plasmid pIJ702 was isolated from S. clavuligerus but not when isolated from Streptomyces lividans.     

Plant regeneration from transformed embryogenic callus of an elite indica rice via Agrobacterium

The present study describes a simple and efficient protocol for plant regeneration from scutellar-derived embryogenic calli of an elite basmati indica rice (Oryza sativa L., cv Pusa Basmati 1) transformed with Agrobacterium. A supervirulent plasmid pTOK233 as well as a non-supervirulent plasmid pJB90GI containing -glucuronidase (gus) and hygromycin phosphotransferase (hpt) chimeric genes were used to assess transformation and regeneration efficiency. The effects of some factors like the bacterial density and inclusion of sorbitol in the medium on the co-culture and transformation have been evaluated; the procedure for selection and regeneration from transformed calli was found to be critical. Furthermore, co-culture and selection on regeneration medium was found to be better than callus medium and led to minimal media manipulations. Regeneration medium supplemented with 3% maltose was found to be better for regeneration as compared to 3% sucrose. The transformed calli were subjected to three cycles of regeneration, thus converting a higher number of transformation events into regenerants. The selected calli as well as leaf sections and roots of the transformants were GUS positive. The stable integration of the transgene was confirmed by polymerase chain reaction and Southern blot analysis of the transformants. Interestingly, the presence of three additional vir genes in supervirulent plasmid pTOK233 was not required for transformation as transformation was successful with non-supervirulent plasmid pJB90GI, although the transformation and regeneration frequency was higher with the former. This effective protocol for regeneration from transformed calli resulted in a relatively high transformation frequency.     

Stable chloroplast transformation in potato: use of green fluorescent protein as a plastid marker

We describe here the development of a reproducible plastid transformation system for potato and regeneration of plants with uniformly transformed plastids. Two distinct tobacco-specific plastid vectors, pZS197 (Prrn/aadA/TpsbA) and pMON30125 (Prrn/GFP/Trps16::PpsbA/aadA/TpsbA), designed for integration into the large single copy and inverted repeat regions of the plastid genome, respectively, were bombarded into leaf explants of potato line FL1607. A total of three transgenic lines were selected out of 46 plates bombarded with pZS197 and three transgenic lines out of 104 plates were obtained with pMON30125. Development of a high frequency leaf-based regenera- tion system, a stringent selection scheme and optimization of biolistic transformation protocol were critical for recovery of plastid transformants. Plastid-expressed green fluorescent protein was used as a visual marker for identification of plastid transformants at the early stage of selection and shoot regeneration. The establishment of a plastid transformation system in potato, which has several advantages over routinely used nuclear transformation, offers new possibilities for genetic improvement of this crop.     

The ploidy level of transgenic plants in <Emphasis Type="Italic">Agrobacterium</Emphasis>-mediated transformation of tomato cotyledons (<Emphasis Type="Italic">Lycopersicon esculentum</Emphasis> L.Mill.) is genotype and procedure dependent

A protocol avoiding the feeder-layer cell system was optimized for Agrobacterium-mediated transformation of tomato cotyledonary explants. Over 500 transgenic plants from five tomato cultivars were regenerated in 15 independent experiments. Depending on both genotype and procedure, transformation frequencies ranged from 1.8% to 11.3%. The optimal transformation rate was obtained by inoculating explants with a bacterial suspension in exponential growth ( D(600) = 10(2)-10(3) cells/ml) and transferring cotyledon explants to fresh selective regeneration medium every 3 weeks. The ploidy level of both tomato genotypes used as explant source and primary transformants, was studied by flow cytometry. The inbred lines and cultivars were diploid but a polysomatic pattern in the cotyledon explant was confirmed. The rate of tetraploid transgenic plants ranged from 24.5% to 80% and depended on both the genotype and the transformation procedure. Surprisingly, the percentages of transformed plants with higher ploidy levels were not related to the proportion of 4C and 8C nuclei in the cotyledonary tissue. For some genotypes the optimisation of the transformation rate resulted in an increase of tetraploid transgenic plants. Results obtained in this work indicate the convenience of checking the ploidy level of the primary transformants before performing basic studies or introducing tomato transgenic material in a breeding program.     

DNA-mediated transformation system in a bipolar basidiomycete, <Emphasis Type="Italic">Pholiota microspora</Emphasis> (<Emphasis Type="Italic">P. nameko</Emphasis>)

We cloned a gene encoding the succinate dehydrogenase iron-sulfur protein subunit (sip) from a bipolar mushroom, Pholiota microspora, and introduced a point mutation that confers carboxin resistance into this gene. Using this homologous selective marker and also a heterologous drug selective marker, the hygromycin B phosphotransferase gene (hph), we successfully constructed a DNA-mediated transformation system in P. microspora. Both these selection markers have high transformation efficiency: the efficiency of carboxin resistance transformation was about 88.8 transformants/μg pMBsip2 DNA using 5 × 10⁶ protoplasts in regeneration plates containing 1.0 μg/ml carboxin, and the efficiency of hygromycin B resistance transformation was about 122.4 transformants/μg pMBhph1 DNA using 5 × 10⁶ protoplasts in regeneration plates containing 150 μg/ml hygromycin B. Southern hybridization analysis showed that the introduced sequence (mutant sip or hph) was integrated into the chromosomal DNA in these transformants with a copy number of one or more.     

Highly efficient protoplast transformation system for Streptococcus faecalis and a new Escherichia coli-S. faecalis shuttle vector.

A highly efficient protoplast transformation system for Streptococcus faecalis has been developed by systematically optimizing different parameters. Up to 10(6) transformants per micrograms of DNA were consistently obtained within 3 days, and cell wall regeneration of protoplasts was virtually 100%. A systematic search for useful vectors showed that the broad-host-range plasmid pIP501 could transform S. faecalis at a high frequency (6.3 X 10(4) transformants per microgram). By combining a high-copy-number derivative of pIP501, designated pGB354, with the Escherichia coli vector pACYC184, we constructed a new E. coli-S. faecalis shuttle vector (pAM401) having nine unique restriction sites. In a shotgun cloning experiment, we ligated a tetracycline resistance determinant from Streptococcus sanguis chromosomal DNA into pAM401 by direct transformation of S. faecalis, establishing the utility of the protoplast transformation system and of the new shuttle vector.     

Development of an Agrobacterium-mediated transformation method for pear (Pyrus communis L.) with leaf-section and axillary shoot-meristem explants

We have developed a new Agrobacterium-mediated transformation method for the low-frequency-regenerating pear (Pyrus communis L.) cvs. Silver bell and La France. Leaf sections derived from in vitro shoots were initially used for the transformation procedure. Under optimum transformation conditions, which included culture and selection on 30 mg/l kanamycin (Km) combined with 500 mg/l sulbenicillin, a 3.2% transformation efficiency was obtained for cv. Silver bell, but no transformants of La France were obtained because of the very low regeneration frequency. Axillary shoot meristems were then examined as potential explants for La France. Selection in 5 mg/l Km and 375 mg/l carbenicillin resulted in transformed shoots being produced at an efficiency of 4.8%, and the apparent white Km-sensitive shoots were not formed during a 2-year subculture on micropropagation medium containing 50 mg/l Km. Therefore, transformations using axillary shoot meristems may be an alternative method for pear cultivars recalcitrant to regeneration from leaf sections.     

PEG-mediated Transformation of Lentinus edodes

Expression vector p301-bG1 contains a gus gene and a bialaphos resistance gene both driven by glyceraldehydes-3-phosphate dehydrogenase (GPD) gene promoter isolated from Lentinus edodes (Berk.) Sing. Using p301-bG1, PEG-mediated transformation of protoplast of L. edodes was studied. Mixed with PEG-purified plasmid DNA, the protoplasts of L. edodes were treated with PEG solution and cultured on CYM regeneration plate containing 40 μg/mL bialaphos. Bialaphos-resistant and GUS-positive transformants were obtained using this transformation system. Although the transformation efficiency was relatively low, the protocols release large expenses on expensive instrument and restriction enzymes, providing a simple and economical method for mushroom breeding at the molecular level.     

High-frequency transformation ofArabidopsis thaliana byAgrobacterium tumefaciens

Incorporation of 5 mg/L silver thiosulphate into media for seed germination and callus induction, as used in the transformation protocol originally described by Valvekens et al. (1988), was found to increase the frequency of regeneration of transformants ofArabidopsis thaliana ecotypes C24 and Landsbergerecta by at least 10- to 100-fold. Other factors, such as density of the bacterial inoculation culture, density of the root explants and duration of bacteria-plant cocultivation period, were also found to influence the efficiency of recovery of transformants.     

Agrobacterium tumefaciens-mediated transformation of broccoli (Brassica oleracea var. italica) and cabbage (B. oleracea var. capitata)

Transgenic broccoli (Brassica oleracea var. italica) was produced by two Agrobacterium tumefaciens-mediated transformation methods. One used flowering stalk explants from mature plants; the other used hypocotyl and petiole explants from in vitro-grown seedlings. Several hundred transformants containing a Bacillus thuringiensis -endotoxin gene (CryIA(c)-type) and the neomycin phosphotransferase gene were recovered. Rooted transformants were obtained in as little as 3 months using seedling explants. Transgenic cabbage was also obtained by the seedling explant method. Parameters important for high efficiency regeneration and transformation rates included use of a tobacco nurse cell layer, sealing of petri dishes with a porous surgical tape instead of Parafilm, preculture of seedling explants and appropriate length of co-cultivation with Agrobacterium. Advantages and disadvantages of each transformation procedure are discussed.     

Comparison of genetic transformation in <Emphasis Type="Italic">Morus alba</Emphasis> L. via different regeneration systems

Three different regeneration systems, viz. direct regeneration of adventitious shoot buds from explant, regeneration through callus cultures and somatic embryos were compared to see their effect on transfer of neomycin phosphotransferase (nptII) and β-glucuronidase (GUS) reporter gene (gus) to Morus alba clone M5, through Agrobacterium tumefaciens mediated transformation. Pre-conditioning and co-cultivation durations had a marked effect on transformation frequency. The highest transformation frequency of 18.6% was obtained using direct induction of adventitious shoot buds. Expression and presence of transgene were assayed histochemically and through polymerase chain reaction. Southern analysis of GUS and PCR positive transformants confirmed stable integration of transgenes with two to four copy numbers. The selected transformants showed normal phenotype under in vitro and field conditions.     

红曲霉不同转化方法比较

为了研究红曲霉聚酮体途径,考察和比较了4种不同的转化方法以建立有效的红曲霉遗传转化系统。以潮霉素作为抗性筛选标记,pBC-Hygro作为转化载体,用基于原生质体的传统转化和电击转化、基于萌发孢子的电击转化以及REMI技术转化红曲霉。发现基于萌发孢子的电击转化由于转化率极低而不适于红曲霉转化。基于原生质体的传统转化和电击转化尽管每微克DNA分别能获得135个转化子和125个转化子,但因转化子稳定性差也适合红曲霉转化的转化。应用REMI技术,转化率提高约20倍,每微克DNA 2500个转化子,70%～75%的转化子的稳定,非常适合于红曲霉的转化。      

Transformation system for Schwanniomyces occidentalis

Spheroplasts of Schwanniomyces occidentalis were used for a transformation system. A putative leu2 mutant of S. occidentalis was complemented with the LEU2 gene (YEp13) from Saccharomyces cerevisiae. The transformation efficiency was 10 3 transformants/mg DNA. Although low stability was obtained, YEp13 could be recovered from transformants and kept the same size and restriction enzyme cutting sites like the original one. The replicon of 2 mm plasmid is responsible for the replication of YEp13 in S. occidentalis.     

Transformation of Streptococcus bovis protoplasts by plasmid DNA

M. MAREKOVÁ, V. KMET' AND P. JAVORSKÝ. 1996. The transformation and subsequent regeneration of ruminal strain Streptococcus bovis AO24/85 protoplasts by plasmid DNA was studied. The best stabilizer for regeneration of protoplasted cells was 5% sucrose in the regeneration medium and in the agar plates. Optimal concentration of polyethylene glycol 6000 in the transformation medium was 25% for both plasmids tested. Addition of Ca²⁺ and Mg²⁺ ions (2.5 mmol l^-1) to the transformation medium increased the proportion of regenerated cells. Transformation frequencies were 3 times 10³ transformants per μg of pNZ12 and 2.4 times 10² per μg of pJK108, respectively.     

Efficient transformation ofMicromonospora melanosporea protoplasts byStreptomyces plasmid

An efficient and relatively simple procedure forMicromonospora melanosporea protoplast preparation and transformation is described. Transformation ofM. melanosporea protoplast by theStreptomyces plasmid pIJ702 was optimized by altering parameters affecting the formation, regeneration, and transformation of protoplasts. Improvement of regeneration medium resulted in relatively quick growth of transformants (only 7 days). As a result of these experiments we describe a new transformation method that has routinely yielded 10⁶ transformants/µg plasmid DNA.     

A new transformation-regeneration procedure in the model legume Lotus japonicus: root explants as a source of large numbers of cells susceptible to Agrobacterium-mediated transformation

We describe herein a simple and efficient transformation procedure for the production of transgenic Lotus japonicus plants. In this new procedure, dedifferentiated root explants, used as starting material, are the source of a large number of cells that are competent for the regeneration procedure, with a high susceptibility to Agrobacterium infection. The application of this protocol resulted in a tenfold increase in the number of transformants produced by a single plant in comparison to the widely used hypocotyl transformation procedure. Furthermore, our procedure allowed the use of intact plants stored for a long time at 4 degrees C, thus providing a potential continuous supply of explants for transformation experiments. The overall time of incubation under tissue culture conditions required to obtain a plant transferable into soil is 4 months. The transgenic nature of the transformants was demonstrated by the detection of beta-glucuronidase (GUS) activity in the primary transformants and by molecular analysis. Stable transformation was indicated by Mendelian segregation of the hygromycin selectable marker and of the gusA activity after selfing of the transgenic plants.     

根癌农杆菌介导的黑曲霉遗传转化体系的建立及优化

基于根癌农杆菌介导的遗传转化方法的独特优点,研究黑曲霉转化过程中各主要影响因素,建立高效的黑曲霉遗传转化方法。构建双元载体pBI-hph,通过电转导入农杆菌LBA4404中,以黑曲霉TCCC41056为受体菌株,利用潮霉素B基因作为筛选标记,对影响转化效率的孢子悬液的新鲜程度及浓度、农杆菌菌液浓度、共培养时间、共培养温度这五个条件进行分析,建立根癌农杆菌介导的黑曲霉遗传转化体系。实验结果表明,上述条件对黑曲霉的转化效率有较大的影响,通过优化,黑曲霉转化效率可达83个转化子/10⁷分生孢子;整合到黑曲霉基因组的外源基因可以稳定遗传,在转接10代后遗传性能仍保持稳定,并在众多转化子中筛选得到了糖化酶活力提高18%的黑曲霉突变株。根癌农杆菌介导的黑曲霉转化体系的建立,为进一步研究黑曲霉的功能基因以及开发黑曲霉表达系统提供了有力的手段。     

Transformation of Bacillus amyloliquefaciens protoplasts with plasmid DNA

Abstract A method for efficient polyethylene glycol (PEG)-mediated transformation of Bacillus amyloliquefaciens protoplasts with plasmid DNA is described. The best conditions found for protoplast regeneration included using 0.45 M sucrose both during the cultivation of the cells and (as an osmotic stabilizer) during their treatment with lysozyme, whereas 0.25 M sodium-succinate was added to the regeneration plates. Under these conditions about 5–10% of input cells regenerated. The highest transformation frequency with plasmid DNA was obtained with a PEG 6000 concentration of 22.5% (w/v). Transforming B. amyloliquefaciens strains with the plasmid pUB110 isolated from B. amyloliquefaciens resulted in 2–4 · 10⁵ transformants/μg DNA, 100–1 000-times as high as with DNA from Bacillus subtilis , suggesting a restriction barrier between the two species. Transformation of B. amyloliquefaciens with plasmids pC194 or pE194 cop -6 gave poor yields and no restriction barrier could be demonstrated for these plasmids. However, by curing pC194 from one of the transformants, a mutant strain compatible to both the plasmids could be isolated, yielding 2–3·10⁴ transformants/μg DNA. Both laboratory and industrial B. amyloliquefaciens strains could be transformed with the procedure.