Flow injection–chemiluminescence determination of acyclovir

The chemiluminescence (CL) reaction of acyclovir (ACV)–potassium permanganate, with formaldehyde as an enhancer, was investigated by the flow‐injection system, and a new method is reported for the determination of ACV on the basis of the reaction. The method is rapid, effective and simple for the determination of acyclovir in the range 0.2–80 mg/L, with a limit of detection of 0.06 mg/L (3 S:N), a relative standard deviation (RSD) of 3.7% for the determination of 1.0 mg/L acyclovir solution in 11 repeated measurements. The method has been applied to the determination of acyclovir in pharmaceuticals, with satisfactory results. The possible reaction mechanism is also discussed briefly. Copyright © 2011 John Wiley & Sons, Ltd.     

The determination of glutamine with flow‐injection chemiluminescence detection and mechanism study

The main purpose of this study was to develop an inexpensive, simple, rapid and sensitive chemiluminescence (CL) method for the determination of glutamine (Gln) using a flow‐injection (FI) system. Gln was found to strongly inhibit the CL signal of the luminol–H₂O₂–CuSO₄ system in Na₂B₄O₇ solution. A new FI‐CL method was developed for the determination of Gln. Parameters affecting the reproducibility and CL detection were optimized systematically. Under the optimized conditions, the corresponding linear regression equation was established over the range of 5.0 × 10^?7 to 2.5 × 10^?6 mol/L with the detection limit of 1.8 × 10^?8 mol/L. The relative standard deviation was found to be 1.8% for 11 replicate determinations of 1.5 × 10^?6 mol/L Gln. The proposed method has been satisfactorily applied for the determination of Gln in real samples (Marzulene‐s granules) with recoveries in the range of 98.7–108.6%. The minimum sampling rate was about 100 samples/h. The possible mechanism of this inhibitory CL was studied by fluorescence spectrophotometer and UV–vis spectrophotometer. Copyright © 2009 John Wiley & Sons, Ltd.     

A critical evaluation of a flow‐cell based on a liquid core waveguide for chemiluminescence measurements

Liquid‐core waveguides (LCWs), devices that constrain the emitted radiation minimizing losses during the transport, are an alternative to maximize the amount of detected radiation in luminescence. In this work, the performance of a LCW flow‐cell was critically evaluated for chemiluminescence measurements, by using as model the oxidation of luminol by hydrogen peroxide or hypochlorite. An analytical procedure for hypochlorite determination was also developed, with linear response in the range 0.2–3.8 mg/L (2.7–51 µmol/L), a detection limit estimated as 8 µg/L (0.64 µmol/L) at the 99.7% confidence level and luminol consumption of 50 µg/determination. The coefficients of variation were 3.3% and 1.6% for 0.4 and 1.9 mg/L ClO^?, respectively, with a sampling rate of 164 determinations/h. The procedure was applied to the analysis of Dakin's solution samples, yielding results in agreement with those obtained by iodometric titration at the 95% confidence level. Copyright © 2008 John Wiley & Sons, Ltd.     

Determination of trace amounts of dopamine by flow‐injection analysis coupled with luminol–Ag(III) complex chemiluminescence detection

A novel flow injection analysis‐direct chemiluminescence (FI‐CL) method has been developed for determination of trace amounts of dopamine (DA) based on the enhancing effect of DA on the CL reaction of luminol with an Ag(III) complex in alkaline solution. Under optimum conditions, CL intensities are proportional to the concentration of DA in the range of 1.0 × 10^?10 to 4.0 × 10^?8 mol L^?1. The detection limit is 3.0 × 10^?11 mol L^?1 for DA (3s), with a relative standard deviation (n = 13) of 2.3% for 1.0 × 10^?8 mol L^?1 DA. This method has also been applied for the determination of DA in commercial pharmaceutical injection samples. On the basis of the CL spectra and the results of the free‐radical trapping experiment of this work, a reaction mechanism for this CL reaction is proposed and discussed. Copyright © 2010 John Wiley & Sons, Ltd.     

Selective determination of human immunoglobulin G by flow‐injection chemiluminescence

A novel flow‐injection chemiluminescence method was developed for the selective determination of human immunoglobulin G (IgG) in the presence of thiomersal by changing the flow rates of peristaltic pump. The study was based on the independence and additivity of the CL signals of human IgG and thiomersal in the galangin–potassium permanganate–polyphosphoric acid system. In meantime, two equations relating to the concentrations of mixing solutions of human IgG and thiomersal vs the CL intensity were established and solved, on the basis of which the content of thiomersal included in samples was simultaneously determined too. The enhanced CL intensity was in proportion to concerntrations in the range 8.0 × 10^?7 to 8.0 × 10^?5 g/mL for human IgG and 1.0 × 10^?7 to 2.0 × 10^?6 g/mL for thiomersal with the detection limits of 5.0 × 10^?7 g/mL for human IgG and 6.0 × 10^?8 g/mL for thiomersal, respectively. The relative standard deviation for 1.0 × 10^?5 g/mL human IgG was 0.8% and for 2.0 × 10^?7 g/mL thiomersal it was 2.0% (n = 10). The proposed method was applied to determine three synthetic samples with recoveries of 91.5–109.5%. In addition, the possible chemiluminescence mechanisms are discussed as well. Copyright © 2010 John Wiley & Sons, Ltd.     

Determination of clomipramine by flow‐injection analysis with acidic potassium permanganate–formic acid chemiluminescence detection

A sensitive and simple chemiluminescent (CL) method for the determination of clomipramine has been developed by combining the flow‐injection analysis (FIA) technique, which is based on the CL intensity generated from the redox reaction of potassium permanganate (KMnO₄)–formic acid in sulphuric acid (H₂SO₄) medium. Under the optimum conditions, the linear range for the determination of clomipramine was 0.04–4 µg/mL, with a correlation coefficient of 0.9988 (n = 10) and a detection limit of 0.008 µg/mL (3σ), and the relative standard deviation (RSD) for 2.0 µg/mL clomipramine (n = 11) is 1.26%. The proposed method has been successfully applied to the determination of the studied clomipramine in pharmaceutical preparations. The possible reaction mechanism is discussed. Copyright © 2011 John Wiley & Sons, Ltd.     

Flow‐injection chemiluminescence method for the determination of chloramphenicol based on luminol–sodium periodate order‐transform second‐chemiluminescence reaction

A new chemiluminescence (CL) reaction was observed when chloramphenicol solution was injected into the mixture after the end of the reaction of alkaline luminol and sodium periodate or sodium periodate was injected into the reaction mixture of chloramphenicol and alkaline luminol. This reaction is described as an order‐transform second‐chemiluminescence (OTSCL) reaction. The OTSCL method combined with a flow‐injection technique was applied to the determination of chloramphenicol. The optimum conditions for the order‐transform second‐chemiluminescence emission were investigated. A mechanism for OTSCL has been proposed on the basis of the chemiluminescence kinetic characteristics, the UV‐visible spectra and the chemiluminescent spectra. Under optimal experimental conditions, the CL response is proportional to the concentration of chloramphenicol over the range 5.0 × 10^?7–5.0 × 10^?5 mol/L with a correlation coefficient of 0.9969 and a detection limit of 6.0 × 10^?8 mol/L (3σ). The relative standard deviation (RSD) for 11 repeated determinations of 5.0 × 10^?6 mol/L chloramphenicol is 1.7%. The method has been applied to the determination of chloramphenicol in pharmaceutical samples with satisfactory results. Copyright © 2011 John Wiley & Sons, Ltd.     

Quantitative determination of bilirubin by inhibition of chemiluminescence from lucigenin.

Bilirubin is a metabolic breakdown product of blood haem, of great biological and diagnostic importance. A new chemiluminescence (CL) method has been developed for the quantification of bilirubin. The method is combined with the flow injection analysis (FIA) technique and based on the inhibition effect of bilirubin on the CL from the lucigenin-hydrogen peroxide system in an alkaline medium. Under the optimum conditions, the decreased CL intensity was proportional to the concentration of bilirubin, in the range 0.0585-58.47 microg/mL. The detection limit estimated from the calibration graph was about 7.8826 ng/mL. The relative standard deviation (RSD) of 10 parallel measurements (1 x 10(-4) mol/L bilirubin) was 2.5%. Recoveries of bilirubin were found to fall in the range 94-97.5% using control sera. The method is interference-free, fast and easy to carry out.     

Flow‐injection determination of cysteine in pharmaceuticals based on luminol–persulphate chemiluminescence detection

A flow injection (FI) method is reported for the determination of l‐ cysteine, based on its enhancement on chemiluminescence (CL) emission of luminol oxidized by sodium persulphate in alkaline solution. The calibration graph was linear over the range 1.0 × 10^–9–5.0 × 10^–7 mol/L (r² = 0.9992), with relative standard deviations (RSDs) in the range 1.1–2.3% (n = 4). The limit of detection (3σ blank) was 5.0 × 10^–10 mol/L with a sample throughput of 120/h. The method was applied to pharmaceuticals and the results obtained were in reasonable agreement with the amount labelled. The proposed method was also applied to cysteine in synthetic amino acid mixtures. Calibration graphs of N‐acetylcysteine and glutathione over the range 1.0–50 × 10^–8 and 0.5–7.5 × 10^–7 mol/L were also established (r² = 0.998 and 0.9986) with RSDs in the range 1.0–2.0% (n = 4), and the limits of detection (3σ blank) were 5.0 × 10^–9 and 1.0 × 10^–8 mol/L, respectively. Copyright © 2008 John Wiley & Sons, Ltd.     

Determination of thiram in natural waters using flow‐injection with cerium(IV)–quinine chemiluminescence system

A simple and rapid flow‐injection chemiluminescence method has been developed for the determination of dithiocarbamate fungicide thiram based on the chemiluminescence reaction of thiram with ceric sulfate and quinine in aqueous sulfuric acid. The present method allowed the determination of thiram in the concentration range of 7.5–2500 ng/mL and the detection limit (signal‐to‐noise ratio = 3) was 7.5 ng/mL with sample throughput of 120/h. The relative standard deviation was 2.5% for 10 replicate analyses of 500 ng/mL thiram. The effects of foreign species including various anions and cations present in water at environmentally relevant concentrations and some pesticides were also investigated. The proposed method was applied to determine thiram in spiked natural waters using octadecyl bonded phase silica (C₁₈) cartridges for solid‐phase extraction. The recoveries were in the range 99 ± 1 to 104 ± 1%. Copyright © 2009 John Wiley & Sons, Ltd.     

Flow injection–chemiluminescence determination of amoxycillin using potassium permanganate and formaldehyde system

It was found that amoxycillin can react with potassium permanganate in an acidic medium to produce chemiluminescence, which is greatly enhanced by formaldehyde. The optimum conditions for this chemiluminescent reaction were studied in detail using a flow‐injection system. The experimental results indicate that, under optimum conditions, the chemiluminescence intensity is linearly related to the concentration of amoxycillin in the range 5.48 × 10^?8–2.74 × 10^?6 mol[sol ]L, with a detection limit (3σ) of 4.1 × 10^?8 mol[sol ]L. The relative standard deviation was 1.0% at 1.1 × 10^?6 mol[sol ]L amoxycillin (n = 11 measurements). This method has the advantages of high sensitivity, fast response and ease of operation. The method was successfully applied to the determination of amoxycillin in raw medicines and capsules. Copyright © 2005 John Wiley & Sons, Ltd.     

Flow‐injection chemiluminescence and electrogenerated chemiluminescence determination of escitalopram oxalate in tablet form

Rapid, simple and highly sensitive flow‐injection (FI) chemiluminescence (CL) and flow‐injection electrogenerated chemiluminescence (ECL) methods were developed for the determination of escitalopram oxalate (ESC), a selective serotonin reuptake inhibitor used as an antidepressant drug. The CL method was based on the CL reaction of ESC with acidic cerium(IV) and tris(2,2'‐bipyridyl)ruthenium(II) (Ru). Various experimental parameters affecting CL intensity were carefully studied and optimised. The method enabled the determination of 0.001‐50 µg/mL of ESC in bulk form with a correlation coefficient r = 0.9999. The limit of detection (LOD) was 0.01 ng/mL (S/N = 3). The ECL method was based on the ECL reaction of Ru with the drug in an acidic medium, permitting the determination of ESC in the range of 0.00001‐70 µg/mL with r = 0.9999 and LOD of 1 x 10^‐4 ng/mL. The proposed methods were applied to the determination of ESC in commercial tablets. The results were compared statistically with those obtained from a published method using t‐ and F‐tests. Copyright © 2012 John Wiley & Sons, Ltd.     

Highly sensitive chemiluminescence determination of tenoxicam using a cerium(IV)–sodium hyposulphite system in micellar medium

A simple, rapid and precise flow‐injection–chemiluminescence (FI–CL) method is presented for the determination of tenoxicam in pharmaceutical preparations and biological samples. The method is based on the weak chemiluminescence signal arising from the reaction of cerium(IV) in a nitric acid medium with sodium hyposulphite being significantly increased by tenoxicam in the presence of sodium dodecyl benzene sulphonate. Several experimental parameters affecting the CL reaction were examined and optimized systematically. Under the optimum conditions, the CL intensity was proportional to the concentration of tenoxicam in the range 7.0 × 10^–11–5.0 × 10^–8 g/mL. The detection limit was 2.3 × 10^–11 g/mL tenoxicam and the relative standard deviation (RSD) was 2.1% for 1.0 × 10^–9 g/mL tenoxicam solution (n = 11). The proposed method was applied to the determination of tenoxicam in pharmaceutical preparations, serum and human urine, with satisfactory results. The possible mechanism of the chemiluminescence reaction is also briefly discussed. Copyright © 2011 John Wiley & Sons, Ltd.     

Determination of nitrate and nitrite in freshwaters using flow‐injection with luminol chemiluminescence detection

A simple and sensitive flow‐injection (FI) method for the determination of nitrate and nitrite in natural waters, based on luminol chemiluminescence (CL) detection, is reported. Nitrate was reduced online to nitrite via a copperized cadmium (Cu–Cd) column and then reacted with acidic hydrogen peroxide to form peroxynitrous acid. CL emission was observed from the oxidation of luminol in an alkaline medium in the presence of the peroxynitrite anion. The limits of detection (S:N = 3) were 0.02 and 0.01 µg N/L, with sample throughputs of 40 and 90 /h for nitrate and nitrite, respectively. Calibration graphs were linear over the range 0.02–50 and 0.01–50 µg N/L [R² = 0.9984 (n = 8) and R² = 0.9965 (n = 7)] for nitrate and nitrite, respectively, with relative standard deviations (RSDs; n = 3) in the range 1.8–4.6%. The key chemical and physical variables (reagent concentrations, buffer pH, flow rates, sample volume, Cu–Cd reductor column length) were optimized and potential interferences investigated. The effect of cations [Ca(II), Mg(II), Co(II), Fe(II) and Cu(II)] was masked online with EDTA. Common anions (PO₄^3?, SO₄^2? and HCO₃^?) did not interfere at their maximum admissible concentrations in freshwaters. The effect of salinity on the luminol CL reaction with and without nitrate and nitrite (2 and 0.5 µg N/L, respectively) was also investigated. The method was successfully applied to freshwaters and the results obtained were in good agreement with those obtained by an automated segmented flow analyser reference method. Copyright © 2011 John Wiley & Sons, Ltd.     

Flow‐injection chemiluminescence method for the determination of naphazoline hydrochloride and oxymetazoline hydrochloride

A sensitive and simple flow‐injection chemiluminescence (FI‐CL) method, which was based on the CL intensity generated from the redoxreaction of potassium permanganate (KMnO₄)–formaldehyde in vitriol (H₂SO₄) medium, has been developed, validated and applied for the determination of naphazoline hydrochloride and oxymetazoline hydrochloride. Besides oxidants and sensitizers, the effect of the concentration of H₂SO₄, KMnO₄ and formaldehyde was investigated. Under the optimum conditions, the linear range was 1.0 × 10^?2–7.0 mg/L for naphazoline hydrochloride and 5.0 × 10^?2–10.0 mg/L for oxymetazoline hydrochloride. During seven repeated inter‐day and intra‐day precision tests of 0.1, 1.0 and 10.0 mg/L samples, the relative standard deviations all corresponded to reference values. The detection limit was 8.69 × 10^?3 mg/L for naphazoline hydrochloride and 3.47 × 10^?2 mg/L for oxymetazoline hydrochloride (signal‐to‐noise ratio ≤3). This method has been successfully implemented for the determination of naphazoline hydrochloride and oxymetazoline hydrochloride in pharmaceuticals. Copyright © 2009 John Wiley & Sons, Ltd.     

Determination of free cholesterol based on a novel flow‐injection chemiluminescence method by immobilizing enzyme

A novel flow injection chemiluminescence method is proposed for determination of cholesterol in this paper. The cholesterol oxidase was immobilized onto sol–gel and prepared as an enzymatic reaction column. The determination of cholesterol was performed by quantitative determination of hydrogen peroxide produced from an enzymatic reaction. The luminol–H₂O₂–metal chelate diperiodatocuprate(III) system ensured that the method was highly sensitive and selective. Free cholesterol was determined over the range 5.0 × 10^–8 mol/L–5.0 × 10^–7 mol/L, with a limit of detection (3σ) of 1.9 × 10^–8 mol/L. The relative standard deviation (RSD) for 2.5 × 10^–7 mol/L was 2.7% (n = 7). The proposed method offered the advantages of sensitivity, selectivity, simplicity and rapidity for free cholesterol determination, and was successfully applied to the direct determination of free cholesterol in serum. Copyright © 2008 John Wiley & Sons, Ltd.     

Flow‐injection method for the determination of iodide/iodine using Ru(bpy)33+–NADH chemiluminescence detection

A two‐channel flow‐injection (FI) method is reported for the determination of iodide and iodine by its enhancement effect on the Ru(bpy)₃³⁺–NADH chemiluminescence (CL) system. The limit of detection (3 s of blank) was 1.0 × 10^–9 mol/L iodide/iodine, with a sample throughput of 60/h. The calibration graphs over the range 1.0–50 × 10^–8 mol/L gave correlation coefficients of 0.9994 and 0.999 (n = 5) with relative standard deviations (RSD; n = 4) of 1.0–2.5%, respectively. The effects of interfering cations, anions and some organic compounds were also studied. The method was applied to iodized salts and pharmaceutical samples and the results obtained were in good agreement with the value quoted. The CL method developed was compared with spectrophotometric method. Copyright © 2008 John Wiley & Sons, Ltd.     

Flow injection chemiluminescence determination of lercanidipine based on N‐chlorosuccinimide–eosin Y post‐chemiluminescence reaction

A novel post‐chemiluminescence (PCL) reaction was discovered when lercanidipine was injected into the CL reaction mixture of N‐chlorosuccinimide with alkaline eosin Y in the presence of cetyltrimethylammonium bromide (CTAB), where eosin Y was used as the CL reagent and CTAB as the surfactant. Based on this observation, a simple and highly sensitive PCL method combined with a flow injection (FI) technique was developed for the assay of lercanidipine. Under optimum conditions, the CL signal was linearly related to the concentration of lercanidipine in the range 7.0 × 10^‐10 to 3.0 × 10^‐6 g/mL with a detection limit of 2.3 × 10^‐10 g/mL (3σ). The relative standard deviation (RSD) was 2.1% for 1.0 × 10^‐8 g/mL lercanidipine (n = 13). The proposed method had been applied to the estimation of lercanidipine in tablets and human serum samples with satisfactory results. The possible CL mechanism is also discussed briefly. Copyright © 2014 John Wiley & Sons, Ltd.     

A flow‐injection chemiluminescent method for the evaluation of the antioxidant activity of 5′‐nucleotides

In the present work, a simple chemiluminescence (CL) method coupled with flow‐injection analysis for the evaluation of antioxidant activity of 5′‐nucleotides (5′‐AMP, 5′‐CMP, 5′‐GMP, 5′‐UMP) was proposed. It is based on inhibition effect of the studied substances on CL emission of luminol–potassium ferricyanide–pyrogallol. Experiments were performed to evaluate the nature of the inhibition by 5′‐nucleotides of the CL reaction and their antioxidant activities. Based on the experimental results, it was observed that 5′‐nucleotides are available antioxidants that could effectively scavenge superoxide anion free radicals in a concentration‐dependent way. This will provide a basis for further development of the use of nucleotides. Copyright © 2009 John Wiley & Sons, Ltd.     

Flow‐injection chemiluminescence of the luminol–potassium periodate system enhanced by TGA–capped CdTe quantum dots for the determination of theophylline

The chemiluminescence (CL) behaviour of the luminol–potassium periodate system enhanced by CdTe quantum dots capped with thioglycolic acid (TGA–CdTe QDs) was studied using kinetic experiments, CL spectra, UV–vis absorption spectra and fluorescence spectra. The production of oxygen‐containing reactant intermediates (O₂^?? and OH^?) in the present CL system was verified by CL. The possible CL mechanism was discussed in detail. Furthermore, theophylline (THP) was determined based on its enhancement of the CL intensity of the CdTe QDs–luminol–potassium periodate system coupled with a flow‐injection technique. Under these optimized conditions, the linear range was found to be from 1.0 × 10^?8 to 1.0 × 10^?5 g/mL with a detection limit of 2.8 × 10^?9 g/mL (3σ). The recoveries for the determination of THP in tablets were from 98.2 to 99.6%.