IS6110-Mediated Deletions of Wild-Type Chromosomes of Mycobacterium tuberculosis

The ipl locus is a site for the preferential insertion of IS6110 and has been identified as an insertion sequence, IS1547, in its own right. Various deletions around the ipl locus of clinical isolates of Mycobacterium tuberculosis were identified, and these deletions ranged in length from several hundred base pairs up to several kilobase pairs. The most obvious feature shared by these deletions was the presence of an IS6110 copy at the deletion sites, which suggested two possible mechanisms for their occurrence, IS6110 transposition and homologous recombination. To clarify the mechanism, an investigation was conducted; the results suggest that although deletion transpositionally mediated by IS6110 was a possibility, homologous recombination was a more likely one. The implications of such chromosomal rearrangements for the evolution of M. tuberculosis, for IS6110-mediated mutagenesis, and for the development of genetic tools are discussed. The deletion of genomic DNA in isolates of M. tuberculosis has previously been noted at only a few sites. This study examined the deletional loss of genetic material at a new site and suggests that such losses may occur elsewhere too and may be more prevalent than was previously thought. Distinct from the study of laboratory-induced mutations, the detailed analysis of clinical isolates, in combination with knowledge of their evolutionary relationships to each other, gives us the opportunity to study mutational diversity in isolates that have survived in the human host and therefore offers a different perspective on the importance of particular genetic markers in pathogenesis.     

The control of copy number of IS6110 in Mycobacterium tuberculosis

Insertion sequence (IS) elements are bacterial genes that are able to transpose to different locations in the genome. These elements are often used in molecular epidemiology as genetic markers that track the spread of pathogens. Transposable elements have frequently been described as "selfish DNA" because they facilitate their own transposition, causing damage when they insert into coding regions, while contributing little if anything to the bacterial host. According to this hypothesis, the expansion of copy number of insertion sequences is opposed by negative selection against high copy numbers. From an alternative point of view, we might expect IS elements to intrinsically regulate transposition within cells, thereby limiting damage to their bacterial host. Here, we report evidence that the copy number of IS6110 in Mycobacterium tuberculosis is controlled by selection against the element. We first construct 12 different models of marker change resulting from a combination of possible transposition functions and selective regimes. We then compute the Akaike Information Criterion for each model to identify the models that best explain data consisting of serial isolates of M. tuberculosis genotyped with IS6110. We find that the best performing models all include selection against the accumulation of copies. Specifically, our analysis points to the interaction of separate copies of the element causing lethal effects. We discuss the implications of these findings for genome evolution and molecular epidemiology.     

Evolutionary relationships among strains of Mycobacterium tuberculosis with few copies of IS6110

Molecular typing of Mycobacterium tuberculosis by using IS6110 shows low discrimination when there are fewer than five copies of the insertion sequence. Using a collection of such isolates from a study of the epidemiology of tuberculosis in London, we have shown a substantial degree of congruence between IS6110 patterns and both spoligotype and PGRS type. This indicates that the IS6110 types mainly represent distinct families of strains rather than arising through the convergent insertion of IS6110 into favored positions. This is supported by identification of the genomic sites of the insertion of IS6110 in these strains. The combined data enable identification of the putative evolutionary relationships of these strains, comprising three lineages broadly associated with patients born in South Asia (India and Pakistan), Africa, and Europe, respectively. These lineages appear to be quite distinct from M. tuberculosis isolates with multiple copies of IS6110.     

Mapping of IS6110 flanking regions in clinical isolates of Mycobacterium tuberculosis demonstrates genome plasticity

Southern hybridization was used in combination with IS6110 insertion-locus-specific probes in a comparative study to determine the structure of chromosomal domains flanking IS6110 elements in clinical isolates of Mycobacterium tuberculosis. The resulting restriction fragment length polymorphism (RFLP) data demonstrated three mutational mechanisms responsible for the polymorphisms observed: IS6110 insertion, chromosomal mutation and deletion. The frequency of IS6110 insertion within many of the chromosomal regions demonstrates that preferential integration regions are common in M. tuberculosis. Mapping the IS6110 insertion positions and chromosomal deletions in relation to the M. tuberculosis H37Rv and M. bovis BCG genome sequences reveals numerous disruptions of predicted open reading frames (ORFs). A phylogenetic tree, based on the mutational data, showed a number of independently evolving lineages of M. tuberculosis, while analysis of the mutational events occurring at each branch point suggests both divergent and convergent evolution. A significant positive correlation was demonstrated between the mutation rate and the frequency of occurrence of different isolates in families of strains, suggesting that evolution may impact on strain 'fitness' or that strain proliferation may increase the chance of mutation. We conclude that the genome of clinical isolates of M. tuberculosis continues to evolve.     

Stimulation of transposition of the Mycobacterium tuberculosis insertion sequence IS6110 by exposure to a microaerobic environment

The Mycobacterium tuberculosis-specific insertion sequence IS6110/986 has been widely used as a probe because of the multiple polymorphism observed among different strains. To investigate transposition of IS6110, a series of artificially constructed composite transposons containing IS6110 and a kanamycin resistance marker were constructed. The composite transposons were inserted into a conditionally replicating, thermosensitive, Escherichia coli-mycobacterial shuttle vector and introduced into M. smegmatis mc2155. Lawns of transformants were grown at the permissive temperature on kanamycin-supplemented agar and subsequently prevented from further growth by shifting to the non-permissive temperature. Under normal atmospheric conditions, kanamycin-resistant papillae appeared after only about 5-6 weeks of incubation. However, these events were not associated with transposon mobilization. In contrast, lawns that were exposed to a 48 h microaerobic shock generated kanamycin-resistant papillae after only 6-14 days. These events were generated by conservative transposition of the IS6110 composite transposon into the M. smegmatis chromosome, with loss of the shuttle vector. In common with other IS3 family elements, transposition of IS6110 is thought to be controlled by translational frameshifting. However, we were unable to detect any significant frameshifting within the putative frameshifting site of IS6110, and the level of frameshifting was not affected by microaerobic incubation. The finding that transposition of IS6110 is stimulated by incubation at reduced oxygen tensions may be relevant to transposition of IS6110 in M. tuberculosis harboured within TB lesions.     

IS6110-mediated deletion polymorphism in the direct repeat region of clinical isolates of Mycobacterium tuberculosis

This study investigates the phenomenon of IS6110-mediated deletion polymorphism in the direct repeat (DR) region of the genome of Mycobacterium tuberculosis. Clinical isolates and their putative predecessors were compared using a combination of DR region restriction fragment length polymorphism, IS6110 DNA fingerprinting, spoligotyping, and DNA sequencing, which allowed the mapping of chromosome structure and deletion junctions. The data suggest that adjacently situated IS6110 elements mediate genome deletion. However, in contrast to previous reports, deletions appear to be mediated by inversely oriented IS6110 elements. This suggests that these events may occur via mechanisms other than RecA-mediated homologous recombination. The results underscore the important role of IS6110-associated deletion hypervariability in driving M. tuberculosis genome evolution.     

IS6110, a Mycobacterium tuberculosis complex-specific insertion sequence, is also present in the genome of Mycobacterium smegmatis, suggestive of lateral gene transfer among mycobacterial species

IS6110 is an insertion element found exclusively within the members of the Mycobacterium tuberculosis complex (MTBC), and because of this exclusivity, it has become an important diagnostic tool in the identification of MTBC species. The restriction of IS6110 to the MTBC is hypothesized to arise from the inability of these bacteria to exchange DNA. We have identified an IS6110-related element in a strain of Mycobacterium smegmatis. The presence of IS6110 indicates that lateral gene transfer has occurred among mycobacterial species, suggesting that the mycobacterial gene pool is larger than previously suspected.     

Drug resistance and IS6110‐RFLP patterns of Mycobacterium tuberculosis in patients with recurrent tuberculosis in northern Thailand

The emergence of drug resistant Mycobacterium tuberculosis has become a global threat to tuberculosis (TB) prevention and control efforts. This study aimed to determine the drug resistance profiles and DNA fingerprints of M. tuberculosis strains isolated from patients with relapsed or retreatment pulmonary TB in Chiang Rai province in northern Thailand. Significant differences in multidrug resistance (MDR) (P = 0.025) and resistance to isoniazid (P = 0.025) and rifampin (P = 0.046) between first and second registrations of patients with retreatment TB were found. However, there were no significant differences in resistance to any drugs in patients with relapsed TB. The rate of MDR‐TB strains was 12.2% among new patients at first registration, 22.5% among patients with recurrence who had previously undergone treatment at second registration and 12.5% at third registration. Two retreatment patients whose initial treatment had failed had developed MDR‐TB with resistance to all TB drugs tested, including rifampin, isoniazid, streptomycin and ethambutol. IS6110‐RFLP analysis revealed that 66.7% (10/15 isolates) of MDR‐TB belonged to the Beijing family. In most cases, IS6110‐RFLP patterns of isolates from the same patients were identical in relapse and retreatment groups. However, some pairs of isolates from retreatment patients after treatment failure had non‐identical IS6110‐RFLP patterns. These results suggest that, after failure and default treatment, patients with retreatment tuberculosis have a significantly greater risk of MDR‐TB, isoniazid and rifampin resistance than do other patients.     

Simple Detection of the IS6110 Sequence of Mycobacterium tuberculosis Complex in Sputum,Based on PCR with Graphene Oxide

Graphene oxide (GO) has proven to be a satisfactory DNA-sensor platform for applications in enzyme-free signal amplification, fluorescence-based amplification, and nanoparticle-based platforms because of its excellent electrical, thermal, and optical properties. In this study, we designed a novel platform for the fluorescence detection of biomolecules, using a fluorescent dye-labeled primer and GO. We applied this system for the detection of the IS6110 insertion sequence of the Mycobacterium tuberculosis complex (MTB) and evaluated its feasibility for use in molecular diagnostics. Fifty-four sputum specimens were collected at our institution from October 2010 to March 2012. To detect MTB in the samples, we performed PCR amplification of the IS6110 DNA sequence using FAM-labeled primers, after which the PCR amplicon was incubated with GO and the fluorescence was measured. The results were compared with those obtained by conventional real-time quantitative PCR (RQ-PCR). The fluorescence intensity observed increased in a concentration-dependent manner with the FAM-labeled IS6110 amplicon. The results of the PCR-GO system for detecting IS6110 DNA were in good agreement with those obtained with conventional RQ-PCR (kappa statistic = 0.925). The PCR-GO system detected MTB DNA in 23 of 25 RQ-PCR-positive sputum samples (92.0%; 95% CI, 75.0–98.0%), but not in 29 of 29 RQ-PCR-negative sputum samples (100%; 95% CI, 88.1–100.0%). These results indicate the utility of the PCR-GO system in molecular diagnostics.     

IS6110 Transposition and Evolutionary Scenario of the Direct Repeat Locus in a Group of Closely Related Mycobacterium tuberculosis Strains

In recent years, various polymorphic loci and multicopy insertion elements have been discovered in the Mycobacterium tuberculosis genome, such as the direct repeat (DR) locus, the major polymorphic tandem repeats, the polymorphic GC-rich repetitive sequence, IS6110, and IS1081. These, especially IS6110 and the DR locus, have been widely used as genetic markers to differentiate M. tuberculosis isolates and will continue to be so used, due to the conserved nature of the genome of M. tuberculosis. However, little is known about the processes involved in generating these or of their relative rates of change. Without an understanding of the biological characteristics of these genetic markers, it is difficult to use them to their full extent for understanding the population genetics and epidemiology of M. tuberculosis. To address these points, we identified a cluster of 7 isolates in a collection of 101 clinical isolates and investigated them with various polymorphic genetic markers, which indicated that they were highly related to each other. This cluster provided a model system for the study of IS6110 transposition, evolution at the DR locus, and the effects of these on the determination of evolutionary relationships among M. tuberculosis strains. Our results suggest that IS6110 restriction fragment length polymorphism patterns are useful in grouping closely related isolates together; however, they can be misleading if used for making inferences about the evolutionary relationships between closely related isolates. DNA sequence analysis of the DR loci of these isolates revealed an evolutionary scenario, which, complemented with the information from IS6110, allowed a reconstruction of the evolutionary steps and relationships among these closely related isolates. Loss of the IS6110 copy in the DR locus was noted, and the mechanisms of this loss are discussed.     

IS6110 fingerprinting of sensitive and resistant strains (1991-1992) of Mycobacterium tuberculosis in Colombia

The standardized method to study the polymorphism of IS 6110 was used to characterize 53 isolates of Mycobacterium tuberculosis obtained during 1991-1992 from 14 regions in Colombia. In Valle region cluster rate was 25% (4/16). The mean number of IS6110 band was 10 +/- 3. Similarity between strains was of 60% in 81% of strains and this tended to be correlated with geographic origin. For the first time M. tuberculosis without IS6110 bands in restriction fragment length polymorphism analysis was found in Colombia. Additional studies are necessaries in order to best characterize the situation in relation to human immunodeficiency virus epidemic and recent changes in tuberculosis control program.     

IS6110 restriction fragment length polymorphism typing of Mycobacterium tuberculosis isolates from East Azerbaijan Province of Iran

To investigate the genetic variation among Mycobacterium tuberculosis isolates in the East Azerbaijan Province of Iran and to evaluate the level of and risk factors for recent transmission of tuberculosis (TB), we performed IS6110-based restriction fragment length polymorphism analysis of strains, isolated from 105 patients during the period of September 2002 to March 2003 in TB centers and university hospitals of the province. Among 105 isolates, 81 different IS6110 patterns were found, of which 70 were observed only once and 11 were shared by two to eight isolates. Ninety-six isolates (91.4%) were found to have more than five copies of IS6110 and together with high patterns polymorphism, shows that IS6110-RFLP typing could be useful for studying the epidemiology of TB in Azerbaijan. The minimum estimated rate of recent transmission was 23%, suggesting that the degree of recent transmission in East Azerbaijan Province is relatively low. Clustering was not associated with age, sex or site of infection of TB but drug-resistant isolates were less likely to be clustered than sensitive isolates (p < 0.05).     

Estimating change rates of genetic markers using serial samples: applications to the transposon IS6110 in Mycobacterium tuberculosis

In infectious disease epidemiology, it is useful to know how quickly genetic markers of pathogenic agents evolve while inside hosts. We propose a modular framework with which these genotype change rates can be estimated. The estimation scheme requires a model of the underlying process of genetic change, a detection scheme that filters this process into observable quantities, and a monitoring scheme that describes the timing of observations. We study a linear "birth-shift-death" model for change in transposable element genotypes, obtaining maximum-likelihood estimators for various detection and monitoring schemes. The method is applied to serial genotypes of the transposon IS6110 in Mycobacterium tuberculosis. The estimated birth rate of 0.0161 (events per copy of the transposon per year) and death rate of 0.0108 are both significantly larger than the estimated shift rate of 0.0018. The sum of these estimates, which corresponds to a "half-life" of 2.4 years for a typical strain that has 10 copies of the element, substantially exceeds a previous estimate of 0.0135 total changes per copy per year. We consider experimental design issues that enable the precision of estimates to be improved. We also discuss extensions to other markers and implications for molecular epidemiology.     

Analysis of sequence diversity among IS6110 sequence of Mycobacterium tuberculosis: possible implications for PCR based detection

The IS6110 belongs to the family of insertion sequences (IS) of the IS3 category. This insertion sequence was reported to be specific for Mycobacterium tuberculosis complex and hence is extensively exploited for laboratory detection of the agent of tuberculosis and for epidemiological investigations based on polymerase chain reaction. IS6110 is 1361-bp long and within this sequence different regions have been utilized as targets in the identification of M. tuberculosis by PCR. However, the results are not always consistent, specific and sensitive. In recent years, a few clinical investigations raised concerns over IS6110 specificity and sensitivity in the diagnosis of tuberculosis due to false-positive (homology with other target DNA besides M. tuberculosis) or false negative (due to absence of copies of IS6110) results with IS6110 specific primers. To unravel the variations in IS6110 sequences, an insilico analysis of IS6110 sequence of different strains of M. tuberculosis was carried out. Our results of comparative analysis of IS6110 insertion sequences of M. tuberculosis complex suggests that, IS6110 insertion sequences harbored variations in its sequence, which is evident from the phylogenetic analysis. Importantly, IS6110 sequence has divergence within the copies of same strain and formed different clusters. A list of IS6110 specific primers used in various clinical investigation of tuberculosis was obtained from the literature and their performance scrutinized. Our study emphasizes the need to develop PCR assays (multiplex format) targeting more than one region of the genome of M. tuberculosis.     

IS6110 restriction fragment length polymorphism of Mycobacterium tuberculosis isolated from patients with pulmonary tuberculosis in Campinas,Brazil: evidence of intercontinental distribution of strains

Tuberculosis (TB) is a major concern in developing countries. In Brazil, few genotyping studies have been conducted to verify the number of IS6110 copies present in local prevalent strains of Mycobacterium tuberculosis, the distribution and clustering of strains. IS6110 DNA fingerprinting was performed on a sample of M. tuberculosis isolates from patients with AFB smear-positive pulmonary TB, at a hospital in Brazil. The IS6110 profiles were analyzed and compared to a M. tuberculosis database of the Houston Tuberculosis Initiative, Houston, US. Seventy-six fingerprints were obtained from 98 patients. All M. tuberculosis strains had an IS6110 copy number between 5-21 allowing for differentiation of the isolates. Human immunodeficiency virus infection was confirmed in nearly half the patients of whom data was available. Fifty-eight strains had unique patterns, while 17 strains were grouped in 7 clusters (2 to 6 strains). When compared to the HTI database, 6 strains matched isolates from El Paso, Ciudad de Juarez, Houston, and New York. Recently acquired infections were documented in 19% of cases. The community transmission of infection is intense, since some clustered strains were recovered during the four-year study period. The intercontinental dissemination of M. tuberculosis strains is suspected by demonstration of identical fingerprints in a distant country.