共查询到20条相似文献,搜索用时 15 毫秒
1.
Fusarium solani pisi recombinant cutinase, solubilized in AOT/isooctane-reversed micelles, was used to catalyze the esterification of fatty acids with aliphatic alcohols. Some relevant parameters for the enzyme activity such as pH, W(o) (water/surfactant molar ratio), temperature, and substrate concentration were optimized. Maximal specific activity was obtained for hexanol. The cutinase showed selectivity for short-chain fatty acids. The stability of the microencapsulated cutinase was investigated at various concentrations of water and different values of pH. Oleic acid had a negative effect on the cutinase stability, while hexanol proved to be a strong stabilizer increasing the half-life of the enzyme about 45 times. (c) 1993 John Wiley & Sons, Inc. 相似文献
2.
Summary A Fusarium solani pisi recombinant cutinase solubilized in phosphatidylcholine/isooctane reversed micelles was used to catalyse the esterification reaction of butyric acid with 2-butanol at pH 10.7. The influence of temperature, Wo and substrates on lipase stability was evaluated. The enzyme displays a better stability, with a half-life over 125 days, at a temperature of 22°C and for a low water content (WO= 6.5). Butyric acid increased the cutinase deactivation (t1/2=0.56h), while 2-butanol led to a similar half-life (t1/2=14h) as without substrate. 相似文献
3.
Melo EP Carvalho CM Aires-Barros MR Costa SM Cabral JM 《Biotechnology and bioengineering》1998,58(4):380-386
Deactivation data and fluorescence intensity changes were used to probe functional and structural stability of cutinase in reverse micelles. A fast deactivation of cutinase in anionic (AOT) reverse micelles occurs due to a reversible denaturation process. The deactivation and denaturation of cutinase is slower in small cationic (CTAB/1-hexanol) reverse micelles and does not occur when the size of the cationic reverse micellar water-pool is larger than cutinase. In both systems, activity loss and denaturation are coupled processes showing the same trend with time. Denaturation is probably caused by the interaction between the enzyme and the surfactant interface of the reversed micelle. When the size of the empty reversed micelle water-pool is smaller than cutinase (at W0 5, with W0 being the water:surfactant concentration ratio) a three-state model describes denaturation and deactivation with an intermediate conformational state existing on the path from native to denaturated cutinase. This intermediate was clearly detected by an increase in activity and shows only minor conformational changes relative to the native state. At W0 20, the size of the empty water-pool was larger than cutinase and the data was well described by a two-state model for both anionic and cationic reverse micelles. For AOT reverse micelles at W0 20, the intermediate state became a transient state and the deactivation and denaturation were described by a two-state model in which only native and denaturated cutinase were present. For CTAB/1-hexanol reverse micelles at W0 20, the native cutinase was in equilibrium with an intermediate state, which did not suffer denaturation. 1-Hexanol showed a stabilizing effect on cutinase in reverse micelles, contributing to the higher stabilities observed in the cationic CTAB/1-hexanol reverse micelles. Copyright 1998 John Wiley & Sons, Inc. 相似文献
4.
The fungal lipolytic enzyme cutinase, incorporated into sodium bis-(2ethylhexyl) sulfosuccinate reversed micelles has been investigated using dynamic light scattering. The reversed micelles form spontaneously when water is added to a solution of sodium bis-(2ethylhexyl) sulfosuccinate in isooctane. When an enzyme is previously dissolved in the water before its addition to the organic phase, the enzyme will be incorporated into the micelles. Enzyme encapsulation in reversed micelles can be advantageous namely to the conversion of water insoluble substrates and to carry out synthesis reactions. However protein unfolding occurs in several systems as for cutinase in sodium bis-(2ethylhexyl) sulfosuccinate reversed micelles. Dynamic light scattering measurements of sodium bis-(2ethylhexyl) sulfosuccinate reversed micelles with and without cutinase were taken at different water to surfactant ratios. The results indicate that cutinase was attached to the micellar wall and that might cause cutinase unfolding. The interactions between cutinase and the bis-(2ethylhexyl) sulfosuccinate interface are probably the driving force for cutinase unfolding at room temperature. Twenty-four hours after encapsulation, when cutinase is unfolded, a bimodal distribution was clearly observed. The radii of reversed micelles with unfolded cutinase were determined and found to be considerable larger than the radii of the empty reversed micelles. The majority of the reversed micelles were empty (90-96% of mass) and the remainder (4-10%) containing unfolded cutinase were larger by 26-89 A. 相似文献
5.
H. Stamatis A. Xenakis U. Bornscheuer T. Scheper U. Menge F. N. Kolisis 《Biotechnology letters》1993,15(7):703-708
Summary The activity of purifiedPseudomonas cepacia lipase has been investigated in esterification reactions of various aliphatic alcohols with natural fatty acids. The reactions were carried out in microemulsions formed in isooctane by bis(2ethylhexyl)sulfosuccinate sodium salt (AOT). The optima pH, T and water content (wo) for the enzyme activity in this type of microemulsions have been determined. Studies on the effect of various fatty acids and alcohols on the enzyme specificity have shown a preference of this lipase for palmitic and caprylic acid as well as for propanol, while reactions involving cyclic alcohols can not be catalyzed at all. The differences on the behavior of this lipase as compared to other lipases studied in microemulsion systems as well as in other systems are discussed. 相似文献
6.
M. G. Carneiro-da-Cunha J. M. S. Cabral M. R. Aires-Barros 《Bioprocess and biosystems engineering》1994,11(5):203-208
This work deals with the extraction and back-extraction of a recombinant cutinase using AOT reversed micelles in isooctane. The effect of pH, ionic strength, AOT concentration and temperature on the extraction and back-extraction of the cutinase was investigated. High extraction (97%) of the cutinase was achieved at pH 7.0 with a 50 mM Tris-HCl buffer solution containing 100 mM KCl, but a low activity was detected in the reversed micellar phase. At pH 9.0, cutinase was extracted (75%) to the reversed micelles with higher activity. Cutinase was recovered (50%) from a reversed micellar phase (100 mM AOT/isooctane) into a 50 mM Tris-HCl buffered solution at pH 9.0 with 100 mM KCl, and 20°C. Protein and cutinase activity global yields of 38 and 45%, respectively, were obtained for the global process, extraction and back-extraction steps, using low ionic strength, pH 9.0, 100 mM AOT and 20°C.Maria das Graças Carneiro da Cunha acknowledges a Ph.D. fellowship from Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) and Centro de Pesquisas Aggeu Magalhães, Brasil. This work was partly financed by the BRIDGE Programme (Contract BIOT-CT91-0274(DTEE)). 相似文献
7.
Rita Pacheco Amin Karmali Manuel L. Matos-Lopes 《Biocatalysis and Biotransformation》2013,31(6):407-414
Amidase, an amide hydrolase enzyme (E.C.3.5.1.4) with acyl transferase activity, was encapsulated in a reversed micellar system composed of the cationic surfactant tetradecyltrimethyl ammonium bromide (TTAB) in heptane/octanol (80/20%) and phosphate buffer at w0 11. The reaction used to study the effect of the reversed micellar system on the enzyme behaviour was a transamidation reaction. The effect of surfactant concentration, buffer molarity and pH on the enzyme kinetics was evaluated. Both initial velocities and product yield were measured. The results indicated that a high initial velocity of hydroxamic acid synthesis and also the highest yield (98%) were obtained using the lowest pH value. The effect of TTAB concentration was dependent on the buffer molarity used. The effect of buffer molarity on reversed micelle dimensions was analysed by light scattering. These results showed that the buffer molarity had a strong influence on the reversed micelle radius that correlated with enzyme activity. 相似文献
8.
The properties of acyl hydrolase enzymes purified from the leaves of Phaseolus multiflorus have been studied. Hydrolase I which deacylates phosphatidylcholine and oleoylglycerol had a pH optimum towards phosphatidylcholine of 5.3. Hydrolase II which deacylates glycosylglycerides and oleoylglycerol showed pH optima of 7.3 (monogalactosyldiglyceride, MGDG) and 4.3 (sulphoquinovosyldiglyceride, SQDG). Both enzymes showed activity peaks towards oleoylglycerol at pH 6.8 and 8.8. Unesterified fatty acids and Triton X-100 inhibited the rate of SQDG hydrolysis while bovine serum albumin increased activity. An apparent Km for SQDG of 0.15 mM was found. Hydrolase II catalysed transmethylation of liberated fatty acids during the hydrolysis of oleoylglycerol when methanol was included in the assay system. A number of salts inhibited SQDG hydrolysis but their effect on oleoylglycerol was less consistent. The position of ester cleavage of oleoylglycerol was determined by the use of H218O. Cell-free extracts from P. multiflorus leaves degraded SQDG as far as sulphoquinovose. 相似文献
9.
根据过渡态理论设计和合成了能诱导产生催化选择性水解布洛芬甲酯的催化抗体的四面体硫酸盐半抗原,并与牛血清白蛋白(BSA)偶联制备成免疫源,通过免疫手段成功筛选出具有加速选择性水解生成S-布洛芬的特异性催化抗体.其Kcat,app/Kuncat,app达1.6x104.进一步地将催化抗体运用到W/O微乳体系(反胶束)中进行布洛芬酯的选择性水解研究,其动力学研究证明其催化过程同样遵循Michaelis.Menten方程.考察了pH值和温度对催化初速度影响,Wo(体系中水和琥珀酸二辛酯磺酸钠(AOT)的摩尔比)对催化初速度影响呈现为钟罩型,最适的Wo.为21. 相似文献
10.
Muhammad Moniruzzaman Mahabubur R. Talukder Takuya Kawanishi 《Biocatalysis and Biotransformation》2013,31(1):51-58
AOT reverse micellar system was modified with DMSO for improved esterification activity of Chromobacteriumviscosum lipase (glycerol–ester hydrolase, EC 3.1.1.3). The enzymatic activity was strongly affected by the concentration of DMSO, and maximum activity was obtained at 30–40 mM. The various relevant physical parameters such as w0 (molar ratio of water to AOT), pH and reaction temperature that influence the activity of lipase were studied in order to obtain the best value and compared with those in simple AOT reverse micelles. The apparent activation energy decreased in the presence of DMSO. The stability of lipase entrapped in modified AOT systems was excellent, and the half-life was about 3.25 times than that observed in simple AOT systems at 25°C. A simple first-order deactivation model was considered to determine the deactivation rate constant. The thermodynamic stability of lipase in reverse micelles was measured by the Gibbs free energy. A fluorescence study was performed to provide information on structural changes in AOT reverse micelles which was accompanied by the addition of DMSO. 相似文献
11.
《Biocatalysis and Biotransformation》2013,31(2-3):153-161
The activity of Candida rugosa lipase (EC 3.1.1.3) in reverse micelles has been measured at various concentrations of water and enzyme with the aim of answering the question, why is the enzyme activity affected by the molar ratio of water to surfactant (w0 = [H2O]/[Surfactant])? In the low range of water content (below w0 ≈ 6), the activity increases with increasing water content, indicating the requirement of a minimum amount of water for the full expression of enzymatic activity. The minimal w0-value for obtaining maximal activity depends on the enzyme concentration: The higher the enzyme concentration, the higher w0, max. In addition, it was found that, at least for the case of Candida rugosa lipase, the measured dependence of enzyme activity on w0 does not represent a true chemical equilibrium. Changing the w0-value during the reaction does not change the activity as expected on the basis of the w0-activity profile obtained for single w0 point measurements. All these observations, however, cannot be directly generalized to all enzymes in reverse micelles, due to the peculiarity of lipase. In particular, the enzyme seems to inactivate irreversibly during the solubilization process. 相似文献
12.
Hydrolysis of triolein in AOT/isooctane reversed micelles by an sn-1,3-regioselective and a non-selective lipase were studied. Kinetics of the multistep reaction: decomposition of tri-, di- and monoacylglycerols and production of fatty acid were investigated separately. All the reactions was found to obey the Michaelis-Menten model and the apparent parameters (Michaelis-constants (Km) and maximal reaction rates (Vmax)) were determined both for non-selective and regioselective preparations. 相似文献
13.
A total of approximately 400 bacterial strains were isolated from 73 plastic wastes collected from 14 different regions. Nineteen isolates that form clear zones both on tributyrin and poly ε-caprolactone (PCL) agar, were identified based on 16S rRNA gene sequences. Among these, Bacillus sp. KY0701 that caused the highest weight loss of PCL films in minimal salt medium, was selected for cutinase production. The highest enzyme activity (15 U/mL) was obtained after 4 days of incubation at 50°C, pH 7.0 and 200?rpm in a liquid medium containing 1.5% (w/v) apple cutin and 0.1% (w/v) yeast extract. The purified enzyme was stable at high temperatures (50–70°C) and over a wide pH range (5.5–9.0). The relative activity of cutinase was at least 75% in the percent of various organic solvents. The apparent Km and Vmax values of the cutinase for p-nitrophenyl butyrate were 0.72?mM and 336.8?µmol p-nitrophenol/h/g, respectively. In addition, it showed high stability and compatibility with commercial detergents. These features of cutinase obtained from Bacillus sp. KY0701 make it a promising candidate for application in the detergent and chemical industries. In our best knowledge, this is the first report for cutinase production and characterization produced by a Bacillus strain. 相似文献
14.
Pasi Halonen Tapani Reinikainen Antti Nyyssl Johanna Buchert 《Enzyme and microbial technology》2009,44(6-7):394-399
A procedure for identifying and profiling cutinolytic esterases was developed by combining traditional plate screen assays with an automated robotic system. In the first phase, the micro-organisms were screened on agar plates with cutin or the model substrate polycaprolactone as the sole carbon sources. In the second phase, p-nitrophenyl esters of fatty acids were used as the substrates in an automated activity assay of liquid culture media. The variables used were pH and the carbon chain length of the fatty acid moiety of the p-nitrophenyl substrate. Finally, 3H-labelled cutin was used as a specific substrate to verify the positive hits and to validate the screening procedure. With pH as the variable in the automatic screen, esterase production of cutinase positive strains typically proceeded in two stages: first an esterase with neutral activity optimum was produced, after which a strong esterolytic response in the alkaline range was detected. With carbon chain length of the fatty acid as the variable best correlation with cutinase production was obtained with strains showing a high ratio of activities towards p-nitrophenyl-butyrate and p-nitrophenyl-palmitate. 相似文献
15.
The effect of a range of commercially available C16 and C18 fatty acids, on the release of cutinase by Ascochyta pisi, was studied. When juniperic acid was used as sole carbon source, cutinase activity was released in the culture medium, and was markedly enhanced by post-treatment of A. pisi cultures with acetone used as enzyme extractor. Without acetone, less cutinase was naturally released in culture medium containing juniperic acid at 0.5 %, than at 0.0l % or 0.05 %. Upon post-treatment with acetone, the same level of cutinase was released with all three concentrations, thus suggesting that the enzyme was induced, but not completely released in the presence of 0.5 % juniperic acid. When ricinelaidic or ricinoleic acids were supplemented at 0.5 % to cutin in the culture medium, they strongly inhibited the release of cutinase, even with acetone post-treatment. Comparable inhibition by ricinoleic acid was also observed when juniperic acid was used as cutinase inducer, thus suggesting that not only the release, but also the production of cutinase were inhibited. 相似文献
16.
Four chiral analogues of the surfactant Aerosol-OT (AOT) have been synthesized and characterized. All of them form reverse micelles in apolar solvents in the w0 range 0–30 (w0 = [water]/[tenside]). Reverse micellar solutions have been investigated by UV absorption and circular dichroism spectroscopies with the aim of clarifying whether the formation of the macromolecular micellar structure induces the appearance of new chromophoric bands or perturbs the existing ones. Methanolic solutions of the surfactants, in which no micellar aggregates are formed, were taken as references. One of the products 1(S),1′(S)-dimethylbisheptylsulphosuccinate sodium salt (MH-AOT) was capable of forming reverse micelles of relatively high water content (w0 up to 40) and this process was accompanied by a specific increase in the intensity of the circular dichroism band associated with the ester absorbance of the molecule. As no concomitant changes were seen in the UV absorbance spectrum, it was concluded that this observation reflected conformational events occurring within the surfactant rather than chromophoric perturbation. These results are qualitatively similar to those found recently for lecithin reverse micelles which, however, form gels at sufficiently high water contents. The chiroptical properties of these supramolecular aggregates are compared with those of covalent macromolecular systems such as polypeptides. 相似文献
17.
There is a developmental increase in fatty acid biosynthesis and surfactant production in late-gestation fetal lung and both are accelerated by glucocorticoids. We have examined the distribution of the newly synthesized fatty acids to determine whether they are preferentially incorporated into surfactant. Explants of 18 day fetal rat lung were cultured with and without dexamethasone for 48 h and then with [3H]acetate for 4 h after which labeled fatty acids were measured. Incorporation of radioactivity from acetate was considered a measure of newly synthesized fatty acids. Phospholipids contained 86% of the newly synthesized fatty acids of which approx. 80% were in phosphatidylcholine. Phosphatidylcholine and disaturated phosphatidylcholine contained a much greater percentage of the labeled fatty acids than of the phospholipid mass determined by phosphorus assay while phosphatidylethanolamine, phosphatidylserine and sphingomyelin contained less. Dexamethasone increased the rate of acetate incorporation into total lipid fatty acids but it had little effect on fatty acid distribution, except that it increased the percentages in phosphatidylglycerol and disaturated phosphatidylcholine. The hormone also increased the mass of these two phospholipids to a greater extent than that of the total. These data suggested that the newly synthesized fatty acids are preferentially incorporated into surfactant phospholipids and that this process is accelerated by dexamethasone. However, since phosphatidylcholine and phosphatidylglycerol are not exclusive to surfactant, we compared isolated lamellar bodies with a residual fraction not enriched in surfactant. The rate of acetate incorporation into fatty acids in lamellar body phosphatidylcholine as well as its specific activity (radioactivity per unit phosphorus) were both increased by dexamethasone. Specific activity, however, was no greater in the lamellar bodies than in the residual fraction in both control and dexamethasone-treated cultures. Therefore, there is no preferential incorporation of newly synthesized fatty acids into phospholipids in surfactant as opposed to those in other components of the lung. 相似文献
18.
《Biocatalysis and Biotransformation》2013,31(4):343-355
Chromobacterium viscosum lipase, solubilized in microemulsion droplets of glycerol containing small amounts of water and stabilized by a surfactant, could catalyze the glycerolysis of triolein. Kinetic analysis of the lipase-catalyzed reaction was possible in the reversed micellar system. Among surfactants and organic solvents tested, bis(2-ethylhexyl)sodiumsulfosuccinate (AOT) and isooctane were respectively most effective, for the glycerolysis of triolein in reversed micelles. Temperature effects, pH profile, Km,app, and Vmax,app were determined. Among various chemical compounds, Fe3+, Cu2+, and Hg2+ inhibited the lipase-catalyzed glycerolysis severely. However, the glycerolysis activity was partially restorable by adding histidine or glycine to the system containing these metal ions. The glycerolysis activity was dependent on water content and maximum activity was obtained at an R value of 1.21. Higher stability of the lipase was obtained in the reversed micellar system. 相似文献
19.
Characterization of lipase in reversed micelles formulated with cibacron blue F-3GA modified span 85
Sorbitan trioleate (Span 85) modified by Cibacron Blue F-3GA (CB) was prepared and used as an affinity surfactant to formulate a reversed micellar system for Candida rugosa lipase (CRL) solubilization. The system was characterized and evaluated by employing CRL-catalyzed hydrolysis of olive oil as a model reaction. The micellar hydrodynamic radius results reflected, to some extent, the redistribution of surfactant and water after enzyme addition, and the correlation between surfactant formulation, water content (W0), micellar size, and enzyme activity. An adequate modification density of CB was found to be important for the reversed micelles to retain enough hydration capacity and achieve high enzyme activity. Compared with the results in AOT-based reversed micelles, CRL in this micellar system exhibited a different activity behavior versus W0. The optimal pH and temperature of the encapsulated lipase remained unchanged, but the apparent activity was significantly higher than that of the native enzyme in bulk solution. Kinetic studies indicated that the encapsulated lipase in the reversed micelles of CB-formulated Span 85 followed the Michaelis-Menten equation. The Michaelis constant was found to decrease with increasing surfactant concentration, suggesting an increase of the enzyme affinity for the substrate. Stability of the lipase in the reversed micelles was negatively correlated to W0. 相似文献
20.
The activity and specificity of phospholipase A2 from cobra venom () toward binary mixtures of phosphatidylcholine and phosphatidylethanolamine in mixed micelles with the nonionic surfactant Triton X-100 were examined. In mixtures containing 5–50 mol % phosphatidylcholine, the rate for phosphatidylethanolamine hydrolysis was enhanced greatly over that for phosphatidylcholine. This is in marked contrast to previous studies with individual phospholipid species in mixed micelles where phosphatidylcholine was found to be the preferred substrate and phosphatidylethanolamine was found to be a very poor substrate. Possible explanations for this specificity reversal are considered. 相似文献