Demonstration of Degenerating Nerve Fibers by a Modified Cajal Technic

Whole brains of cat were fixed in two changes of cold acetone (24 hours each) and embedded directly in paraffin. The degeneration time recommended is 5 days. Mounted sections 15-20 μ thick were deparaffined, washed in absolute alcohol and given successive treatments of 6 hours each with 1% ammoniated absolute alcohol and pure pyridine, washing well with distilled water between them and after the pyridine. Impregnation in 2% silver nitrate 12 hours at 30°C., rinsing in absolute alcohol and reducing in a 95% alcoholic solution of pyrogallol and formalin (3% and 5%) was followed by 50% alcohol, thorough washing in distilled water, toning in 1% gold chloride and intensification in 1% oxalic acid. Treatment in 10% sodium thiosulfate solution, washing, dehydrating and covering completed the procedure. Normal fibers, degenerating fibers and terminals were stained specifically.     

The New Domestic Cresyl Echt Violet

Specimens of both vertebrate and invertebrate nerve-containing tissues were fixed 2-3 days in Bouin's fluid, soaked 2 days in alcohol containing 2% strong ammonia water, dehydrated and embedded in paraffin. The sections were mounted with gelatin adhesive according to Masson's procedure, dewaxed, passed through graded alcohols to water, then back to 2% ammoniated 80% alcohol for 12-24 hours. The slides were rinsed 3-5 seconds in distilled water, impregnated about one and a half hours in 40% AgNO₃ at increasing temperature up to 45°C. The slides were flooded with 62.5% formalin and this solution allowed to remain 3-5 minutes; they were then blotted with filter paper. A second impregnation in ammoniated silver carbonate, controlled under the microscope, was followed by a 10-minute treatment with 10% aqueous acetic acid, toning with gold chloride, then thiosulfate and finally washing. Counterstaining with ponceau red or acid fuchsin, eventually followed by aniline blue or fast green, dehydration and covering, completed the process.     

An Ammoniated Silver Carbonate Technic for Nervous Structures in Mounted Paraffin Sections

Specimens of both vertebrate and invertebrate nerve-containing tissues were fixed 2-3 days in Bouin's fluid, soaked 2 days in alcohol containing 2% strong ammonia water, dehydrated and embedded in paraffin. The sections were mounted with gelatin adhesive according to Masson's procedure, dewaxed, passed through graded alcohols to water, then back to 2% ammoniated 80% alcohol for 12-24 hours. The slides were rinsed 3-5 seconds in distilled water, impregnated about one and a half hours in 40% AgNO₃ at increasing temperature up to 45°C. The slides were flooded with 62.5% formalin and this solution allowed to remain 3-5 minutes; they were then blotted with filter paper. A second impregnation in ammoniated silver carbonate, controlled under the microscope, was followed by a 10-minute treatment with 10% aqueous acetic acid, toning with gold chloride, then thiosulfate and finally washing. Counterstaining with ponceau red or acid fuchsin, eventually followed by aniline blue or fast green, dehydration and covering, completed the process.     

Enhanced Reliability in Silver Impregnation of Terminal Axonal Degeneration-Original Nauta Method

Brains of rat with surgical lesions 3-5 days old are fixed in 10% neutralized formalin (excess of CaCO₃), 20 μ serial frozen sections cut therefrom and kept in neutralized formalin for an additional 24-48 hr. The sections are soaked in distilled water 12-24 hr, transferred to 50% alcohol containing 0.75 ml of concentrated NH₄OH (sp. gr. 0.91) per 100 ml 12-24 hr, placed in distilled water 2-3 hr and then in silver-pyridine solution (AgNO₃ 3% aq., 20 ml; pyridine, 1 ml) for 48 hr. Test sections are transferred directly to each one of 3 ammoniated silver-solutions, pH 12.8, 13.0 and 13.2, made as follows: To 200 ml of solution 1 (silver nitrate, 6.4 gm; alcohol 96%, 220 ml; NH₄OH (sp. gr. 0.91), 28 ml and distilled water, 440 ml) is added respectively 8-12 ml, 12-16 ml and 16-20 ml of solution 2 (2% NaOH) to give the pH desired. The test sections are studied and the optimal ammoniated silver solution chosen. Two baths of ammoniated silver are used, the section placed with continuous agitation into the first bath for 30 sec and the second bath for 60 sec. The sections are then transferred directly into a reducing bath (formalin 10%, 2ml; alcohol 96%, 5 ml; citric acid 1%, 1.5 ml and distilled water, 4.5 ml) for 2 min and from there to 5% Na₂S₂O₃ for 1 min, rinsed in 3 changes of distilled water, dehydrated and mounted.     

The Demonstration of Beta Cells in Pancreatic Islets and Their Tumors

The stain is applied routinely to tissues fixed in 10% buffered formalin (pH near 7.0) or in Bouin's fluid. Bring paraffin section to water as usual and mordant 72 hr in 5% CrCl₃ dissolved in 5% acetic acid. Wash in water and in 70% alcohol and stain 6 hr. Formula of staining solution: new fuchsin, 1% in 70% alcohol, 100 ml; HCl, conc., 2 ml and paraldehyde, 2 ml, mixed together and added to the dye solution; let stand 24 hr before use. After staining, wash in running tap water 5-10 min, rinse in distilled water and counterstain if desired. Dehydration in alcohol, clearing and covering completes the process. When the paraldehyde is obtained from a freshly opened bottle, standardized staining times can be used and thus eliminate the necessity of differentiating individual slides. The granules of beta cells stained deep blue to purple and were demonstrated in the pancreatic islet of man, dog, mouse, frog, guinea pig and rabbit.     

Histochemical Use of Sodium Bismuthate

Histochemical 1,2-glycoI cleavage, similar to that obtained with periodic acid and lead tetraacetate, may be obtained with sodium bismuthate. Routinely prepared slide sections, from tissues fixed in 10% formalin, are run down through xylene and graded alcohols to water and then oxidized for three minutes in a 1% sodium bismuthate 20% aqueous phosphoric acid solution. The oxidizing solution must be freshly prepared and used immediately. Following oxidation, sections are rinsed 15 sec. in IN HC1 to remove bismuth pentoxide precipitate, a by-product of the reaction. The sections are then washed in distilled water and placed in leuco-fushsin for 10 min., or in a saturated 30%) alcoholic solution of p-nitrophenylhydrazine for 5 min. or 2,4-dinitrophenylhydrazine for 30 minutes. After staining, the sections are rinsed in 30% alcohol if the nitrophenylhydrazines were used, or in the standard dilute sulfite bath followed by running tap water for 5 min. if leucofuchsin were used. Sections are routinely dehydrated, cleared, and covered. On examination, the sites of 1,2-glycol linkages will be stained violet by leucofushsin or yellow by the nitrophenylhydrazines.     

Histochemical Use of Sodium Bismuthate

Histochemical 1,2-glycoI cleavage, similar to that obtained with periodic acid and lead tetraacetate, may be obtained with sodium bismuthate. Routinely prepared slide sections, from tissues fixed in 10% formalin, are run down through xylene and graded alcohols to water and then oxidized for three minutes in a 1% sodium bismuthate 20% aqueous phosphoric acid solution. The oxidizing solution must be freshly prepared and used immediately. Following oxidation, sections are rinsed 15 sec. in IN HC1 to remove bismuth pentoxide precipitate, a by-product of the reaction. The sections are then washed in distilled water and placed in leuco-fushsin for 10 min., or in a saturated 30%) alcoholic solution of p-nitrophenylhydrazine for 5 min. or 2,4-dinitrophenylhydrazine for 30 minutes. After staining, the sections are rinsed in 30% alcohol if the nitrophenylhydrazines were used, or in the standard dilute sulfite bath followed by running tap water for 5 min. if leucofuchsin were used. Sections are routinely dehydrated, cleared, and covered. On examination, the sites of 1,2-glycol linkages will be stained violet by leucofushsin or yellow by the nitrophenylhydrazines.     

Differentiation of Myofibrillae, Reticular and Collagenous Fibrils in Vertebrates

A procedure for the differentiation of the mesenchymal derivatives, myofibrillae, reticular and collagenous fibers is presented. Formol-Zenker fixation (5-12 hours) is followed by the washing, iodinization, dehydration and paraffin embedding steps routine for that fixative with the following modifications. Zirkle's butyl alcohol series is used for dehydration and infiltration with paraffin as well as in the alcohol slide series. Embedding paraffin used is Parawax plus 8-10% bayberry wax. Tissue-exposed surface of paraffin block is soaked in water overnight before cutting serial sections at 3-5μ. Sections are mounted using the dilute albumen method, and the slides, thoroughly dried at 37^oC. overnight, are left at 60^o for 10 minutes to melt the paraffin of the sections. Before staining, the sections are given a preliminary treatment with potassium permanganate and oxalic acid. For reticular staining a 10% silver nitrate bath is succeeded by an ammoniacal silver carbonate solution followed by reduction in 1% neutral formalin, toning in gold chloride and fixing in sodium thiosulphate. Myofibrillae, the sacroplasmic limiting membrane and other sarcous elements are stained by Heidenhain's azocarmine solution, adult tissues at room temperature and fetal tissues at 50 ^oC. Differentiation in phosphotungstic acid is followed by the staining of collagenous fibers. For adult tissue, light green SF (C.C.) is used and for fetal tissue, fast green FCF (C.C). A discussion of the preparation of ammoniacal silver solutions is included. Both stock and used solutions of ammoniacal silver have been in use by the author for over a period of two years.     

Histochemical Use Of Lead Tetra-Acetate I. Cleavage Of 1-2 Glycols

Lead tetra-acetate acts specifically to split the carbon-carbon single bond of the 1,2-glycol linkage to produce aldehyde radicals which may then be demonstrated by means of leucofuchsin, 2,4-dinitrophenlyhydrazine, or p-nitrophenylhydrazine. Routinely prepared slide sections from tissues fixed in 10% formalin are run down to 95% alcohol, rinsed in glacial acetic acid and then treated for 2 minutes in a saturated solution of lead tetra-acetate in glacial acetic acid with 5 g. of potassium acetate added for each 100 ml. of reagent. The sections are then washed in distilled water and placed in leucofuchsin for 10 minutes, or in a saturated 30% alcoholic solution of p-nitrophenylhydrazine for 5 minutes or 2,4-dini-trophenylhydrazine for 30 minutes. After staining, the sections are rinsed in 30% alcohol if the nitrophenylhydrazines were used, or in the standard dilute sulfite bath followed by running tap water for 5 minutes if leucofuchsin were used. Sections are routinely dehydrated, cleared, and covered. On examination, the sites of 1,2-glycol linkages will be stained violet by leucofuchsin or yellow by the nitrophenylhydrazines.     

Dichromate-Chlorate Perfusion Prior to Staining Degeneration in Brain and Spinal Cord

A method of fixation compatible with both the Nauta-Gygax and Swank-Davenport procedures for degenerating nerve fibers, which shortens the time required by the former procedure, is as follows: The central nervous system is perfused with a 0.9% aqueous solution of NaCl followed by an aqueous solution containing 5% K₂Cr₂O₇ and 2.5% KClO₃. The central nervous system is then hardened in 10% formalin for 1-3 days. Tissue for Marchi-type staining can be taken at this stage. For silver staining, the processing is continued by immersion overnight in 10% formalin in 20% alcohol, and frozen sections cut the next day. Sections, up to 50μ in thickness, are collected in 10% formalin and impregnated by the Nauta-Gygax technique. Best results are obtained by impregnating within 24-48 hr after sectioning.     

Feulgen's Reaction Applied to Protozoa and Small Worms, Mounted In Toto in Venetian Turpentine

Permanent mounts of certain protozoa and small worms are obtained as follows: kill suspensions of the organisms with Feulgen's fixative (6% HgCl₂ in 2% aqu. acetic acid) for 3 to 24 hours. After pipetting off the fixative, add successively: 70% iodized alcohol; ditto, 30 minutes later; 50%, then 35% alcohol; 2 baths distilled water; normal HCl. Transfer to cold water and heat to 60°C for 4 to 5 minutes or longer. Cool under running water; and wash in distilled water.

Stain 1 to 3 hours in Feulgen's fuchsin sulfurous acid (1 g. of a suitable basic fuchsin, e. g. rosanilin hydrochloride, boiled in 200 cc. water, cooled, and allowed to stand 24 hours after adding 20 cc. normal HCl and 1 g. sodium bisulfite). Pass thru 3 baths of 200 cc. distilled water with 10 cc. normal HCl and 1 g. sodium bisulfite. Transfer to water and then to 35%, 70%, and 95% alcohols successively. Counterstain with fast green FCF, orange G or eosin Y in 95% alcohol. Pass thru two changes of absolute alcohol.

Transfer to 10% Venetian turpentine and place in a dessicator; mount after the turpentine has become concentrated.

If sections instead of total mounts are desired, the material should go from absolute alcohol, thru alcohol-xylol and xylol to paraffin (or preferably paraffin of M. P. 56°C with 3% bees-wax). The paraffin may be added to the material in the test tube, and cooled after the organisms have settled. Then break the tube, trim a block, and cut.     

Staining and Mounting Helminths

The following procedure is recommended: Fix ces-todes and trematodes (while held flat between glass slides) 0.5-2.0 hr. in the following mixture: formalin, 15; acetic acid (gl.), 5; glycerol, 10; 95% ethyl alcohol, 24; distilled H₂O, 46; all proportions by volume. After freeing them from the slides, wash thoroughly in running water and stain immediately thereafter. Stock staining solution: ferric ammonium alum (violet cryst.), 2 g.; distilled H₂O (cold) 100 ml.; after solution, add 2 ml. concentrated H₂SO₄, bring to a boil; add 1 g. coelestin blue B (Nat. Aniline), boil 3-5 min.; cool and add 10 ml. absolute methyl alcohol and 10 ml. glycerol. Dilute 1 vol. with 3 vol. distilled H20 for use. Stain 5-30 min., depending on size of specimens. Wash with 2 changes 0.5 hr. each of distilled H₂O, then 50% isopropyl alcohol 12-16 hr., 50% isopropyl alcohol 2 hr., followed by graded isopropyl alcohol for dehydration. Ether: ethyl alcohol (equal parts), 1 hr., is followed by embedding in celloidin in a sheet just thick enough to cover the specimens. Trim embedded specimens and dehydrate with isopropyl alcohol, 80%, 90% and absolute. Clear in beechwood creosote. Mount in balsam with cover glasses that overlap the edges of the celloidin 1-2 mm. While drying at 37°C, refill edges of mount with fresh balsam as needed. When dry, remove excess balsam and ring the edges with ordinary gloss enamel paint.     

Staining Nuclei and Chromosomes in Protozoa

Technics for free-living forms such as Paramecium and for parasitic forms such as the opalinid ciliates are described.

Paramecium: Fix paramecia in hot Schaudinn's fluid containing 5% of glacial acetic acid for 5-15 minutes. (A hot water bath for maintaining the proper temperature of the fixative is described.) Dehydrate up to 83% alcohol. Mount the specimens on albuminized cover glasses. (A table for mounting animals on cover glasses is described.) Apply a thin layer of collodion to the cover glass to prevent the loss of the specimens during the subsequent handling. Pass through descending grades of alcohol to water. Mordant in 4% iron alum for 24 hours. Stain in 0.5% hematoxylin for 24 hours. Destain in saturated aqueous picric acid. Rinse in tap water, expose to ammonia vapor for a second, and then rinse again in tap water. Wash in running water for 1 hour. Dehydrate. Clear, then mount in damar.

Opalinid Ciliates: Make smears on cover glasses and fix them while wet. If the opalinids are to be subsequently stained in hematoxylin, fix in hot Schaudinn's fluid (containing 5% of glacial acetic acid) for 5-15 minutes. Pass through descending grades of alcohol to water. Mordant in iron alum for 24 hours. Stain in hematoxylin for 24 hours. Destain in saturated aqueous picric acid. For Feulgen reaction, fix in a modified weak Flemming's fluid for 1 hour. Wash in running water for 30 minutes. Hydrolyze. Leave 3 hours in fuchsin decolorized with H₂SO₃ (Feulgen formula). Wash in H₂SO₃, then in running water for 15 minutes. Dehydrate up to 95% alcohol. Counterstain with fast green FCF for 2 minutes. Dehydrate in absolute alcohol. Clear, then mount in damar.     

Adaptation of Mallory's Trichrome Stain to Embryonic and Fetal Material

Based upon results of an investigation of the role of phosphotungstic acid in connective tissue staining, the Mallory trichrome stain was adapted to sequential application of all three dyes, thus making it usable on embryonic and fetal material. Ten to twelve day postconception mouse fetuses were formalin fixed and paraffin embedded. Staining was as follows: (1) 1% aqueous acid fuchsin for 5 min followed by not more than 30 sec in running tap water; (2) 2% aqueous phosphomolybdic acid (PMA) for 10 min followed by a 2 min running tap water wash; (3) staining in 0.5% aniline blue in 8% acetic acid for 10 min, followed consecutively by 30 sec in running tap water, 2% aqueous PMA for 2 min, and 30 sec in running tap water; (4) 2% orange G in 8% acetic acid for 5 min, and rinsing for 30 sec in running tap water. Dehydration in ethanol, t-butanol, acetone, or by blotting followed by 1:3 terpineol-xylene, clearing in xylene and mounting, completed the procedure. The 30 sec tap water rinses can optionally be replaced by 1-2 min in 8% acetic acid. Sections can be made redder by increasing acid fuchsin staining time, or increasing time in the first PMA; red can be decreased by decreasing staining time, increasing time of the 2 min tap water wash, or decreasing time in the first PMA. Blue or orange staining can be increased or decreased by varying staining times in these solutions. Sharper differentiation may be obtained by increasing the time in PMA.     

New Fuchsin-Hematoxylin-Eosin; A Stain for Acid-Fast Bacilli and Surrounding Tissue

This is a staining technique for histopathologic evaluation of tissue reaction in the environs of acid-fast tubercle bacilli (avian and bovine) in sections. Fresh tissue is fixed in 10% neutral formalin and processed in the usual manner for embedding in paraffin. Sections are cut approximately 6 μ. thick, dewaxed, hydrated, and stained with Harris' hematoxylin. They are rinsed in tap water, differentiated in add alcohol, washed in tap water, given a distilled water rinse and stained at 20-30° C in a 1% solution of new fuchsin in 5% phenol. Each slide is then handled individually by placing it directly into a saturated aqueous solution of Li₂CO₃ and agitated gently for a few seconds. This is followed by differentiation with 5% glacial acetic acid in absolute or 95% ethyl alcohol until the color stops running. Two rinses in absolute or 95% ethyl alcohol follow. The sections are then counterstained in the color add of eosin Y prepared according to the method of Schleicher (Stain Techn., 28, 119-23, 1953) and used as an 0.025% solution in absolute alcohol. Following passage through 2 changes of absolute alcohol, the sections are cleared in xylene, then mounted in Permount or similar synthetic resin. The add-fast barilli are emphasized by their bright retractile red color within a contrasting background of hematoxylin and eosin.     

Histological Localization of Microelectrode Placement in Brain by Ferrocyanide and Silver Staining

After recordings had been taken from a microelectrode used for mapping nerve impulses, a current of 100 μa from the positive pole of a direct current generator was run through the electrode for 5 sec while it was still in place. On terminating the experiment, in which the use of several electrodes was possible, 50-75 ml of a 1:1 mixture of 4% potassium ferrocyanide and 4% acetic acid was injected into each common carotid artery, and the brain left in situ for 0.5 hr. It was then removed and the electrode-bearing part fixed 5-6 hr in a 1:1 mixture of 40% formalin and 95% ethyl alcohol at 55 °C. This specimen was washed in running water 5-10 min, the electrodes removed and frozen sections of 40-80 μ cut and placed in 95% alcohol. Sections were stained 5-10 min at 25-30°C in 10% silver nitrate solution in 75-80% alcohol acidified by 3-4 drops of glacial acetic acid per 50 ml, washed 4-5 sec in each of 2 baths of 95% alcohol, and reduced while being agitated constantly in a 2% solution of pyrogallol and 6-7% formalin in 75-80% alcohol. Washing in 95% alcohol, clearing in clove oil or methyl salicylate followed by xylene and mounting in synthetic resin or balsam completed the process. Sites of electrolysis at the tips of electrodes (under magnification) were blue before silver staining and black after staining. Axons stained brown to black on a yellow background.     

Impregnation of Oligodendroglia in Nervous Tissue Kept in Formalin for Many Years

A method for impregnating oligodendroglia in nervous tissue (monkey) fixed and preserved in formalin for many years is described. This tissue is reconditioned by placing 12 to 30μ frozen sections of it in concentrated ammonia (sp. gr. 0.90) and by washing them slowly for 24 hours with a 1 mm. stream of water. The fluid is then poured off the sections; the jar is refilled with concentrated ammonia; and washing is repeated for another 24 hours. The sections are then plunged into concentrated ammonia for 7 minutes.

After treatment in ammonia, the sections are incubated for one hour at 38^oC. in Globus' 5% hydrobromic acid solution. They are washed again, in distilled water, and then impregnated in a “medium” strength ammoniacal silver carbonate solution (5 ml. of 10% AgNO₃ added to 15 ml. of 5% Na₂CO₃. The precipitate is dissolved in concentrated ammonia and diluted to SO ml. with distilled water). Impregnation is followed by reduction in 1% formalin without agitation; fixation in 5% Na₂S₂O₃; dehydration, and mounting in clarite.

Typical oligodendroglia (Fig. 1) were made visible by use of the method outlined in this paper.     

Staining and Mounting Helminths

The following procedure is recommended: Fix ces-todes and trematodes (while held flat between glass slides) 0.5–2.0 hr. in the following mixture: formalin, 15; acetic acid (gl.), 5; glycerol, 10; 95% ethyl alcohol, 24; distilled H₂O, 46; all proportions by volume. After freeing them from the slides, wash thoroughly in running water and stain immediately thereafter. Stock staining solution: ferric ammonium alum (violet cryst.), 2 g.; distilled H₂O (cold) 100 ml.; after solution, add 2 ml. concentrated H₂SO₄, bring to a boil; add 1 g. coelestin blue B (Nat. Aniline), boil 3–5 min.; cool and add 10 ml. absolute methyl alcohol and 10 ml. glycerol. Dilute 1 vol. with 3 vol. distilled H20 for use. Stain 5–30 min., depending on size of specimens. Wash with 2 changes 0.5 hr. each of distilled H₂O, then 50% isopropyl alcohol 12–16 hr., 50% isopropyl alcohol 2 hr., followed by graded isopropyl alcohol for dehydration. Ether: ethyl alcohol (equal parts), 1 hr., is followed by embedding in celloidin in a sheet just thick enough to cover the specimens. Trim embedded specimens and dehydrate with isopropyl alcohol, 80%, 90% and absolute. Clear in beechwood creosote. Mount in balsam with cover glasses that overlap the edges of the celloidin 1–2 mm. While drying at 37°C, refill edges of mount with fresh balsam as needed. When dry, remove excess balsam and ring the edges with ordinary gloss enamel paint.     

New Fuchsin-Hematoxylin-Eosin; A Stain for Acid-Fast Bacilli and Surrounding Tissue

This is a staining technique for histopathologic evaluation of tissue reaction in the environs of acid-fast tubercle bacilli (avian and bovine) in sections. Fresh tissue is fixed in 10% neutral formalin and processed in the usual manner for embedding in paraffin. Sections are cut approximately 6 μ. thick, dewaxed, hydrated, and stained with Harris' hematoxylin. They are rinsed in tap water, differentiated in add alcohol, washed in tap water, given a distilled water rinse and stained at 20-30° C in a 1% solution of new fuchsin in 5% phenol. Each slide is then handled individually by placing it directly into a saturated aqueous solution of Li₂CO₃ and agitated gently for a few seconds. This is followed by differentiation with 5% glacial acetic acid in absolute or 95% ethyl alcohol until the color stops running. Two rinses in absolute or 95% ethyl alcohol follow. The sections are then counterstained in the color add of eosin Y prepared according to the method of Schleicher (Stain Techn., 28, 119-23, 1953) and used as an 0.025% solution in absolute alcohol. Following passage through 2 changes of absolute alcohol, the sections are cleared in xylene, then mounted in Permount or similar synthetic resin. The add-fast barilli are emphasized by their bright retractile red color within a contrasting background of hematoxylin and eosin.     

Orcein-Hematoxylin in Iodized Ferric Chloride as a Stain for Elastic Fibers, With Metanil Yellow Counterstaining

Autopsy and biopsy specimens of human skin were fixed overnight in alcoholic Bouin's solution, embedded in paraffin, cut at 7 μ, deparaffinized, hydrated to 70% alcohol, and treated as follows—stained 2 hours in a mixture consisting of: 0.2% orcein in 70% alcohol and 1% HC1 (conc.), 125 ml; 5% hematoxylin in absolute alcohol, 40 ml; 6% FeCl₃ in water, 25 ml; and aqueous I₂-KI (1:2:100), 25 ml—rinsed in distilled water until the excess stain was removed—differentiated in 1.2% FeCl₃, 5-15 sec—washed in running water, 5 min—differentiation completed in 0.01% HC1 acid-alcohol, 1 min—a dip in 95% alcohol—distilled water, 2 min—0.25% aqueous metanil yellow, 5-10 sec—a 95% alcohol dip—dehydrated in absolute alcohol, xylene, and mounted in a resinous medium. The technic combines the orcein of Pinkus' stain and the hematoxylin mixture of Verhoeff into a single staining solution and gives sharp and reliable results for both coarse and extremely delicate elastic fibers. These stain purple; nuclei, violet; and background, yellow. The stain allows the use of formalin, Bouin's fluid and Zenker-formol fixation. The results have been consistent in other primates as well as in man.