A novel hydrogen peroxide sensor based on immobilization of haemoglobin on nano-TiO2/DTAB composite film

Abstract

The direct electron transfer of immobilized haemoglobin (Hb) on nano-TiO₂ and dodecyltrimethylammonium bromide (DTAB) film modified carbon paste electrode (CPE) and its application as a hydrogen peroxide (H₂O₂) biosensor were investigated. On nano-TiO₂/DTAB/Hb/CPE, Hb displayed a rapid electron transfer process with participation of one proton and with an electron transfer rate constant which estimated as 0.29 s^??1. Thus, the proposed biosensor exhibited a high sensitivity and excellent electrocatalytic activity for the reduction of H₂O₂. The catalytic reduction current of H₂O₂ was proportional to H₂O₂ concentration in the range of 0.2–4.0 mM with a detection limit of 0.07 mM. The apparent Michaelis–Menten constant (K_m^app) of the biosensor was calculated to be 0.127 mM, exhibiting a high enzymatic activity and affinity. This sensor for H₂O₂ can potentially be applied in determination of other reactive oxygen species as well.     

Direct electrochemistry of hemoglobin in dimethyldioctadecyl ammonium bromide film and its electrocatalysis to nitric oxide

Hemoglobin (Hb) was successfully immobilized in dimethyldioctadecyl ammonium bromide (DOAB) film at pyrolytic graphite (PG) electrode. Electrochemical experiments revealed that Hb in DOAB film exhibited a pair of well-defined, quasi-reversible cyclic voltammetric peaks at about -0.160 V versus saturated calomel electrode (SCE) in pH 5.0 buffer, characteristic of the heme Fe(III)/Fe(II) redox couple of Hb. The electron transfer (eT) rate between Hb and the PG electrode was 0.10 s(-1). Positions of the Soret absorbance band indicated that the Hb retained its secondary structure and was similar to its native state. Furthermore, the Hb in DOAB film acted as a biological catalyst towards the reduction of nitric oxide (NO). The voltammetric response of NO at the Hb-DOAB modified electrode could be used to determine the concentration of NO in solution.     

Nanoplated bismuth titanate sub-microspheres for protein immobilization and their corresponding direct electrochemistry and electrocatalysis

A layered inorganic perovskite sub-micrometer-scale material, nanoplated bismuth titanate (Bi₄Ti₃O₁₂) sub-microspheres (NBTSMs) constructed with tens of Bi₄Ti₃O₁₂ nanoplates, was for the first time synthesized by a facile hydrothermal synthesis strategy. The NBTSMs were employed as a supporting matrix to explore a novel immobilization and biosensing platform of redox proteins through a combined hydrogen bond and electrostatic assembly process. Biocompatibility, stability, reproducibility, and electrochemical and electrocatalytic properties of the resulting NBTSMs-based composite were studied by UV–vis absorption, FTIR, and electrochemical methods. The research results revealed that the NBTSMs-based composite was a satisfying matrix for proteins to effectively retain their native structure and bioactivity. With advantages of the Bi₄Ti₃O₁₂ layered material, facilitated direct electron transfer of the metalloenzymes with an apparent heterogeneous electron transfer rate constant (k_s) of 20.0 ± 3.8 s⁻¹ was acquired on the NBTSMs-based enzyme electrode. The NBTSMs-based biosensor demonstrated significant electrocatalytic activity for the reduction of hydrogen peroxide with an apparent Michaelis–Menten constant (204 μM), wide linear range (2–430 μM), and low detection limit (0.46 μM, S/N = 3). These indicated that the nanoplate-constructed Bi₄Ti₃O₁₂ sub-microspheres were one of ideal candidate materials for direct electrochemistry of redox proteins and the construction of the related enzyme biosensors, and may find potential applications in biomedical, food, and environmental analysis and detection.     

Direct electron transfer between hemoglobin and pyrolytic graphite electrodes enhanced by Fe(3)O(4) nanoparticles in their layer-by-layer self-assembly films

Alternate adsorption of negatively charged Fe(3)O(4) nanoparticles from their pH 8.0 aqueous dispersions and positively charged hemoglobin (Hb) from its pH 5.5 buffers on solid substrates resulted in the assembly of {Fe(3)O(4)/Hb}(n) layer-by-layer films. Quartz crystal microbalance (QCM), UV-vis spectroscopy, and cyclic voltammetry (CV) were used to monitor and confirm the film growth. A pair of well-defined, nearly reversible CV peaks for HbFe(III)/Fe(II) redox couples was observed for {Fe(3)O(4)/Hb}(n) films on pyrolytic graphite (PG) electrodes. Although the multilayered films grew linearly with the number of Fe(3)O(4)/Hb bilayers (n) and the amount of Hb adsorbed in each bilayer was generally the same, the electroactive Hb could only extend to 6 bilayers. This indicates that only those Hb molecules in the first few bilayers closest to the electrode surface are electroactive. The electrochemical parameters such as the apparent heterogeneous electron transfer rate constant (k(s)) were estimated by square wave voltammetry (SWV) and nonlinear regression. The Soret absorption band position of Hb in {Fe(3)O(4)/Hb}(6) films showed that Hb in the films retained its near native structure in the medium pH range. The {Fe(3)O(4)/Hb}(6) film electrodes also showed good biocatalytic activity toward reduction of oxygen, hydrogen peroxide, trichloroacetic acid, and nitrite. The electrochemical reduction overpotentials of these substrates were lowered significantly by {Fe(3)O(4)/Hb}(n) films.     

Improving of Catalase Stability Properties by Encapsulation in Alginate/Fe3O4 Magnetic Composite Beads for Enzymatic Removal of H2O2

The aim of this study was enhancing of stability properties of catalase enzyme by encapsulation in alginate/nanomagnetic beads. Amounts of carrier (10–100 mg) and enzyme concentrations (0.25–1.5 mg/mL) were analyzed to optimize immobilization conditions. Also, the optimum temperature (25–50°C), optimum pH (3.0–8.0), kinetic parameters, thermal stability (20–70°C), pH stability (4.0–9.0) operational stability (0–390 min), and reusability were investigated for characterization of the immobilized catalase system. The optimum pH levels of both free and immobilized catalase were 7.0. At the thermal stability studies, the magnetic catalase beads protected 90% activity, while free catalase maintained only 10% activity at 70°C. The thermal profile of magnetic catalase beads was spread over a large area. Similarly, this system indicated the improving of the pH stability. The reusability, which is especially important for industrial applications, was also determined. Thus, the activity analysis was done 50 times in succession. Catalase encapsulated magnetic alginate beads protected 83% activity after 50 cycles.     

Zinc tetraaminophthalocyanine-Fe3O4 nanoparticle composite for laccase immobilization

Zinc tetraaminophthalocyanine-Fe3O4 nanoparticle composites were prepared by organic-inorganic complex technology and characterized. It has been proved that the ZnTAPc dispersed randomly onto the surface of Fe3O4 nanoparticles to form molecular dispersion layer and there was a relatively strong bond between central zinc cation and oxygen. The nanoparticle composite took the shape of roundish spheres with the mean diameter of about 15 nm. Active amino groups of magnetic carriers could be used to bind laccase via glutaraldehyde. The optimal pH for the activity of the immobilized laccases and free laccase were the same at pH 3.0 and the optimal temperature for laccase immobilization on ZnTAPc-Fe3O4 nanoparticle composite was 45 degrees. The immobilization yields and K(m) value of the laccase immobilized on ZnTAPc-Fe3O4 nanoparticle composite were 25% and 20.1 microM, respectively. This kind of immobilized laccase has good thermal, storage and operation stability, and could be used as the sensing biocomponent for the fiber optic biosensor based on enzyme catalysis.     

Optimum conditions for lipase immobilization on chitosan-coated Fe3O4 nanoparticles

Magnetic Fe₃O₄-chitosan nanoparticles are prepared by the coagulation of an aqueous solution of chitosan with Fe₃O₄ nanoparticles. The characterization of Fe₃O₄-chitosan is analyzed by FTIR, FESEM, and SQUID magnetometry. The Fe₃O₄-chitosan nanoparticles are used for the covalent immobilization of lipase from Candida rugosa using N-(3-dimethylaminopropyl)-N′-ethylcarbodiimide (EDC) and N-hydroxysuccinimide (NHS) as coupling agents. The response surface methodology (RSM) was employed to search the optimal immobilization conditions and understand the significance of the factors affecting the immobilized lipase activity. Based on the ridge max analysis, the optimum immobilization conditions were immobilization time 2.14 h, pH 6.37, and enzyme/support ratio 0.73 (w/w); the highest activity obtained was 20 U/g Fe₃O₄-chitosan. After twenty repeated uses, the immobilized lipase retains over 83% of its original activity. The immobilized lipase shows better operational stability, including wider thermal and pH ranges, and remains stable after 13 days of storage at 25 °C.     

Efficacy of Fe3O4/Starch Nanoparticles on Sporosarcina pasteurii Performance in MICP Process

The microbial induced calcite precipitation (MICP) has been explored using well-known urease producer bacterium Sporosarcina pasteurii for many applications including soil stabilization. Urease enzyme hydrolyzes urea and in the presence of calcium chloride causes calcium carbonate precipitation between sand particles increasing sand stiffness and strength. In this study, the liquefied soil samples from Anzali coast were positioned inside injection columns by standard positioning technique. The columns were treated by injecting S. pasteurii suspension and cementation solution (CaCl₂ and urea). The effect of different conditions consisting of number of injections, injection intervals, flow rate, and ratio of injection solution on unconfined compression strength (USC) of sands formed inside the columns were evaluated. The results indicated that soil strength was increased when ratio of reactant solutions and injection time were elevated. Moreover, the maximum Ca-precipitation in MICP reaction in liquid medium was obtained while Fe₃O₄/starch concentration and time of addition of nanoparticle to culture medium were 10.8?mg/L and 1.4?h, respectively. The USC results showed that the columns injected by bacterial suspension treated by Fe₃O₄/starch under optimized conditions improved the soil strength up to 1200?kPa in comparison to the control column as 220?kPa.     

Amperometric tyrosinase biosensor based on Fe3O4 nanoparticles-chitosan nanocomposite

A novel tyrosinase biosensor based on Fe(3)O(4) nanoparticles-chitosan nanocomposite has been developed for the detection of phenolic compounds. The large surface area of Fe(3)O(4) nanoparticles and the porous morphology of chitosan led to a high loading of enzyme and the entrapped enzyme could retain its bioactivity. The tyrosinase-Fe(3)O(4) nanoparticle-chitosan bionanocomposite film was characterized with atomic force microscopy and AC impedance spectra. The prepared biosensor was used to determine phenolic compounds by amperometric detection of the biocatalytically liberated quinone at -0.2V vs. saturated calomel electrode (SCE). The different parameters, including working potential, pH of supporting electrolyte and temperature that governs the analytical performance of the biosensor have been studied in detail and optimized. The biosensor was applied to detect catechol with a linear range of 8.3 x 10(-8) to 7.0 x 10(-5)mol L(-1), and the detection limit of 2.5 x 10(-8)mol L(-1). The tyrosinase biosensor exhibits good repeatability and stability. Such new tyrosinase biosensor shows great promise for rapid, simple, and cost-effective analysis of phenolic contaminants in environmental samples. The proposed strategy can be extended for the development of other enzyme-based biosensors.     

Hydrogen peroxide is required for abscisic acid-induced NH4+ accumulation in rice leaves

The role of H₂O₂ in abscisic acid (ABA)-induced NH₄⁺ accumulation in rice leaves was investigated. ABA treatment resulted in an accumulation of NH₄⁺ in rice leaves, which was preceded by a decrease in the activity of glutamine synthetase (GS) and an increase in the specific activities of protease and phenylalanine ammonia-lyase (PAL). GS, PAL, and protease seem to be the enzymes responsible for the accumulation of NH₄⁺ in ABA-treated rice leaves. Dimethylthiourea (DMTU), a chemical trap for H₂O₂, was observed to be effective in inhibiting ABA-induced accumulation of NH₄⁺ in rice leaves. Inhibitors of NADPH oxidase, diphenyleneiodonium chloride (DPI) and imidazole (IMD), and nitric oxide donor (N-tert-butyl-α-phenylnitrone, PBN), which have previously been shown to prevent ABA-induced increase in H₂O₂ contents in rice leaves, inhibited ABA-induced increase in the content of NH₄⁺. Similarly, the changes of enzymes responsible for NH₄⁺ accumulation induced by ABA were observed to be inhibited by DMTU, DPI, IMD, and PBN. Exogenous application of H₂O₂ was found to increase NH₄⁺ content, decrease GS activity, and increase protease and PAL-specific activities in rice leaves. Our results suggest that H₂O₂ is involved in ABA-induced NH₄⁺ accumulation in rice leaves.     

Synergistic effect of the combination of nanoparticulate Fe3O4 and Au with daunomycin on K562/A02 cells

In this study, we have explored the possibility of the combination of the high reactivity of nano Fe3O4 or Au nanoparticles and daunomycin, one of the most important antitumor drugs in the treatment of acute leukemia clinically, to inhibit MDR of K562/A02 cells. Initially, to determine whether the magnetic nanoparticle Fe3O4 and Au can facilitate the anticancer drug to reverse the resistance of cancer cells, we have explored the cytotoxic effect of daunomycin (DNR) with and without the magnetic nano-Fe3O4 or nano-Au on K562 and K562/A02 cells by MTT assay. Besides, the intracellular DNR concentration and apoptosis of the K562/A02 cells was further investigated by flow cytometry and confocal fluorescence microscopic studies. The MDR1 gene expression of the K562/A02 cells was also studied by RT-PCR method. Our results indicate that 5.0 x 10(-7) M nano-Fe3O4 or 2.0 x 10(-8) M nano-Au is biocompatible and can apparently raise the intracellular DNR accumulation of the K562/A02 cells and increase the apoptosis of tumor cells. Moreover, our observations illustrate that although these two kinds of nanoparticles themselves could not lower the MDRI gene expression of the K562/A02 cells, yet they could degrade the MDR1 gene level when combining with anticancer drug DNR. This raises the possibility to combine the nano-Fe3O4 or nano-Au with DNR to reverse the drug resistance of K562/A02 cells, which could offer a new strategy for the promising efficient chemotherapy of the leukemia patients.     

Effects of hydrogen peroxide (H2O2) on alkaline phosphatase activity and matrix mineralization of odontoblast and osteoblast cell lines

Hydrogen peroxide (H₂O₂), an oxidizing agent, has been widely used as a disinfectant. Recently, because of its reactive properties, H₂O₂ has also been used as a tooth bleaching agent in dental care. This is a cause for concern because of adverse biological effects on the soft and hard tissues of the oral environment. To investigate the influence of H₂O₂ on odontoblasts, the cells producing dentin in the pulp, we assessed cellular viability, generation of reactive oxygen species (ROS), alkaline phosphatase (ALP) activity, and nodule formation of an odontoblastic cell line (MDPC-23) after treatment with H₂O₂, and compared those with the effects on preosteoblastic MC3T3-E1 cells. Cytotoxic effects of H₂O₂ began to appear at 0.3 mmol/L in both MDPC-23 and MC3T3-E1 cells. At that concentration, the accumulation of intracellular ROS was confirmed by a fluorescent probe, DCFH-DA. Although more ROS were detected in MDPC-23, the increasing pattern and rate are similar between the two cells. When the cells were treated with H₂O₂ at concentrations below 0.3 mmol/L, MDPC-23 displayed a significant increase in ALP activity and mineralized bone matrix, while MC3T3-E1 cells showed adverse effects of H₂O₂. It is known that ROS are generally harmful by-products of aerobic life and represent the primary cause of aging and numerous diseases. These data, however, suggest that ROS can induce in vitro cell differentiation, and that they play a more complex role in cell physiology than simply causing oxidative damage.     

Enhancement of BKCa channel activity induced by hydrogen peroxide: Involvement of lipid phosphatase activity of PTEN

Large-conductance calcium and voltage-dependent potassium (BK_Ca) channel is an important determinant of vascular tone. It is activated by hydrogen peroxide (H₂O₂) which occurs in various physiological and pathological processes. However, the regulation mechanism is not fully understood. In the present study, the mSlo in the presence or absence of hβ1 were cotransfected with the PTEN_wt, PTEN_C124S, PTEN_G129E in HEK 293 cells. Typical BK_Ca channel currents could be recorded in cell-attached configurations. We found that PTEN_wt reduced the H₂O₂-induced BK_Ca channel activation during the initial 10 min treatment. In contrast, coexpression with catalytically inactive PTEN_C124S/PTEN_G129E mutants that lack lipid phosphatase activity produced no regulation on the H₂O₂-induced BK_Ca channel activation. These results demonstrated that PTEN regulated the H₂O₂-induced BK_Ca channel activation through phosphatidylinositol 3-phosphatse. However, the inhibitory effect of PTEN on the H₂O₂-induced BK_Ca channel activation was attenuated when cells were treated with H₂O₂ at concentrations higher than 100 μM or at 100 μM for long-term treatment. In addition, the p-AKT expression level in PTEN_wt overexpressing cells was lower than that in control cells, and the increase of cytoplasmic free calcium concentration ([Ca²⁺]_i) induced by H₂O₂ was also inhibited. These findings may elucidate a new mechanism for H₂O₂-induced BK_Ca channel activation and provide some evidences for the role of PTEN on vasodilation induced by H₂O₂.     

Comparative study of nano and bulk Fe3O4 induced oxidative stress in Wistar rats

Context: Magnetic nanomaterials (Fe₃O₄ NMs) have become novel tools with multiple biological and medical applications because of their biocompatibility. However, adverse health effects of these NMs are of great interest to learn.

Objective: This study was designed to assess the size and dose-dependent effects of Fe₃O₄ NMs and its bulk on oxidative stress biomarkers after post–subacute treatment in female Wistar rats.

Methods: Rats were daily administered with 30, 300 and 1000?mg/kg b.w. doses for 28?d of Fe₃O₄ NMs and its bulk for biodistribution and histopathological studies.

Results: Fe₃O₄ NMs treatment caused significant increase in lipid peroxidation levels of treated rats. It was also observed that the NM treatment elicited significant changes in enzyme activities of superoxide dismutase, catalase, glutathione peroxidase, glutathione reductase and glutathione-S-transferase in treated rat organs with major reduction in glutathione content. Metal content analysis revealed that tissue deposition of NM in the organs was higher when compared to bulk and caused histological changes in liver.

Conclusion: This study demonstrated that for same dose, NM showed higher bioaccumulation, oxidative stress and tissue damage than its bulk. The difference in toxic effect of Fe₃O₄ nano and bulk could be related to their altered physicochemical properties.     

Effects of irradiance and temperature on photosynthesis in C3, C4 and C3/C4 Panicum species

Species in the Laxa and Grandia groups of the genus Panicum are adapted to low, wet areas of tropical and subtropical America. Panicum milioides is a species with C₃ photosynthesis and low apparent photorespiration and has been classified as a C₃/C₄ intermediate. Other species in the Laxa group are C₃ with normal photorespiration. Panicum prionitis is a C₄ species in the Grandia group. Since P. milioides has some leaf characteristics intermediate to C₃ and C₄ species, its photosynthetic response to irradiance and temperature was compared to the closely related C₃ species, P. laxum and P. boliviense and to P. prionitis. The response of apparent photosynthesis to irradiance and temperature was similar to that of P. laxum and P. boliviense, with saturation at a photosynthetic photo flux density of about 1 mmol m^-2 s^-1 at 30°C and temperature optimum near 30°C. In contrast, P. prionitis showed no light saturation up to 2 mmol m^-2 s^-1 and an optimum temperature near 40°C. P. milioides exhibited low CO₂ loss into CO₂-free air in the light and this loss was nearly insensitive to temperature. Loss of CO₂ in the light in the C₃ species, P. laxum and P. boliviense, was several-fold higher than in P. milioides and increased 2- to 5-fold with increases in temperature from 10 to 40°C. The level of dark respiration and its response to temperature were similar in all four Panicum species examined. It is concluded that the low apparent photorespiration in P. milioides does not influence its response of apparent photosynthesis to irradiance and temperature in comparison to closely related C₃ Panicum species.Abbreviations AP apparent photosynthesis - I CO₂ compensation point - gl leaf conductance; gm, mesophyll conductance - PPFD photosynthetic photon flux density - PR apparent photorespiration rate - RuBPC sibulose bisphosphate carboxylase     

Tailoring size and structural distortion of Fe3O4 nanoparticles for the purification of contaminated water

Fe₃O₄ magnetic nanoparticles with different particle sizes were synthesized using two methods, i.e., a co-precipitation process and a polyol process, respectively. The atomic pair distribution analyses from the high-energy X-ray scattering data and TEM observations show that the two kinds of nanoparticles have different sizes and structural distortions. An average particle size of 6–8 nm with a narrow size distribution was observed for the nanoparticles prepared with the co-precipitation method. Magnetic measurements show that those particles are in ferromagnetic state with a saturation magnetization of 74.3 emu g⁻¹. For the particles synthesized with the polyol process, a mean diameter of 18–35 nm was observed with a saturation magnetization of 78.2 emu g⁻¹. Although both kinds of nanoparticles are well crystallized, an obviously higher structural distortion is evidenced for the co-precipitation processed nanoparticles. The synthesized Fe₃O₄ particles with different mean particle size were used for treating the wastewater contaminated with the metal ions, such as Ni(II), Cu(II), Cd(II) and Cr(VI). It is found that the adsorption capacity of Fe₃O₄ particles increased with decreasing the particle size or increasing the surface area. While the particle size was decreased to 8 nm, the Fe₃O₄ particles can absorb almost all of the above-mentioned metal ions in the contaminated water with the adsorption capacity of 34.93 mg/g, which is ∼7 times higher than that using the coarse particles. We attribute the extremely high adsorption capacity to the highly-distorted surface.     

Differential sensitivity of C3 and C4 turfgrass species to increasing atmospheric vapor pressure deficit

Temperature and vapor pressure deficit (VPD) effects on turfgrass growth are almost always confounded in experiments because VPD commonly is substantially increased in elevated-temperature treatments. The objective of this study as to examine specifically the influence of VPD on transpiration response of four ‘warm-season’ (C₄) and four ‘cool-season’ (C₃) turfgrasses to increasing VPD at a stable temperature (29.3 ± 1.5 °C). Although transpiration rates were noticeably lower in C₄ grasses, transpiration rates increased linearly in response to increasing VPD across the range of 0.8–3.0 kPa. In contrast, transpiration rates of C₃ increased sharply with increasing VPD across the range of low VPDs, but became constrained at higher VPDs (>1.35 kPa). Restricted transpiration rate at elevated VPD was most evident in Agrostis palustris and Lolium perenne. Assuming restricted transpiration rates reflect a limitation on leaf CO₂ uptake, these results indicate that the commonly observed decline in growth of C₃ (and success of C₄) grasses at elevated temperature may include a sensitivity to elevated VPD.     

Co-function of C3-and C4-photosynthetic pathways in C3, C4 and C3-C4 intermediate Flaveria species

The potential for C₄ photosynthesis was investigated in five C₃-C₄ intermediate species, one C₃ species, and one C₄ species in the genus Flaveria, using ¹⁴CO₂ pulse-¹²CO₂ chase techniques and quantum-yield measurements. All five intermediate species were capable of incorporating ¹⁴CO₂ into the C₄ acids malate and aspartate, following an 8-s pulse. The proportion of ¹⁴C label in these C₄ products ranged from 50–55% to 20–26% in the C₃-C₄ intermediates F. floridana Johnston and F. linearis Lag. respectively. All of the intermediate species incorporated as much, or more, ¹⁴CO₂ into aspartate as into malate. Generally, about 5–15% of the initial label in these species appeared as other organic acids. There was variation in the capacity for C₄ photosynthesis among the intermediate species based on the apparent rate of conversion of ¹⁴C label from the C₄ cycle to the C₃ cycle. In intermediate species such as F. pubescens Rydb., F. ramosissima Klatt., and F. floridana we observed a substantial decrease in label of C₄-cycle products and an increase in percentage label in C₃-cycle products during chase periods with ¹²CO₂, although the rate of change was slower than in the C₄ species, F. palmeri. In these C₃-C₄ intermediates both sucrose and fumarate were predominant products after a 20-min chase period. In the C₃-C₄ intermediates, F. anomala Robinson and f. linearis we observed no significant decrease in the label of C₄-cycle products during a 3-min chase period and a slow turnover during a 20-min chase, indicating a lower level of functional integration between the C₄ and C₃ cycles in these species, relative to the other intermediates. Although F. cronquistii Powell was previously identified as a C₃ species, 7–18% of the initial label was in malate+aspartate. However, only 40–50% of this label was in the C-4 position, indicating C₄-acid formation as secondary products of photosynthesis in F. cronquistii. In 21% O₂, the absorbed quantum yields for CO₂ uptake (in mol CO₂·[mol quanta]^-1) averaged 0.053 in F. cronquistii (C₃), 0.051 in F. trinervia (Spreng.) Mohr (C₄), 0.052 in F. ramosissima (C₃-C₄), 0.051 in F. anomala (C₃-C₄), 0.050 in F. linearis (C₃-C₄), 0.046 in F. floridana (C₃-C₄), and 0.044 in F. pubescens (C₃-C₄). In 2% O₂ an enhancement of the quantum yield was observed in all of the C₃-C₄ intermediate species, ranging from 21% in F. ramosissima to 43% in F. pubescens. In all intermediates the quantum yields in 2% O₂ were intermediate in value to the C₃ and C₄ species, indicating a co-function of the C₃ and C₄ cycles in CO₂ assimilation. The low quantum-yield values for F. pubescens and F. floridana in 21% O₂ presumably reflect an ineffcient transfer of carbon from the C₄ to the C₃ cycle. The response of the quantum yield to four increasing O₂ concentrations (2–35%) showed lower levels of O₂ inhibition in the C₃-C₄ intermediate F. ramosissima, relative to the C₃ species. This indicates that the co-function of the C₃ and C₄ cycles in this intermediate species leads to an increased CO₂ concentration at the site of ribulose-1,5-bisphosphate carboxylase/oxygenase and a concomitant decrease in the competitive inhibition by O₂.Abbreviations PEP phosphoenolpyruvate - PGA 3-phosphoglycerate - RuBP ribulose-1,5-bisphosphate     

Synthesis of 2α-substituted-14-epi-previtamin D3 and its genomic activity

We synthesized and isolated 2α-substituted analogs of 14-epi-previtamin D₃ after thermal isomerization at 80 °C for the first time. The VDR binding affinity and transactivation activity of osteocalcin promoter in HOS cells were evaluated, and the 2α-methyl-substituted analog was found to have greater genomic activity than 14-epi-previtamin D₃.     

Acylation of carbohydrates over Al2O3: preparation of partially and fully acylated carbohydrate derivatives and acetylated glycosyl chlorides

Selective and per-O-acylation of carbohydrate derivatives using acyl chlorides and Al2O3, a solid support reagent, is reported. This protocol does not require the addition of any base or activator. This methodology has been further extended to the selective acylation of carbohydrate diols and the one-pot preparation of acetylated glycosyl chlorides direct from free reducing sugars. The yields obtained in most of the cases are excellent.