Improved activity and pH stability of E. coli ATCC 11105 penicillin acylase by error-prone PCR

Penicillin G acylase is the key enzyme used in the industrial production of β-lactam antibiotics. This enzyme hydrolyzes penicillin G and related β-lactam antibiotics releasing 6-aminopenicillanic acid, which is an intermediate in the production of semisynthetic penicillins. To improve the enzymatic activity of Escherichia coli penicillin acylase, sequential rounds of error-prone polymerase chain reaction were applied to the E. coli pac gene. After the second round of evolution, the best mutant M2234 with enhanced activity was selected and analyzed. DNA sequence analyses of M2234 revealed that one amino acid residue (K297I), located far from the center of the catalytic pocket, was changed. This mutant (M2234) has a specific activity 4.0 times higher than the parent enzyme and also displayed higher stability at pH 10.     

Activity of penicillin acylase from E. coli in the reversed-micelle system AOT--H2O--octane

The behavior of a penicillin acylase from E. coli was studied in the reversed-micelle system AOT--H2O--octane. Kinetic studies of the enzymatic hydrolysis of the m-carboxy-p-nitroanilide of phenylacetic acid, titration of the penicillin acylase active site with an irreversible specific inhibitor (phenylmethylsulfonyl fluoride), sedimentation analysis at different hydration degrees, and chemical modification showed that the enzyme loses no more than 20% of its initial activity during 3-4 h in the reversed-micelle systems of different hydration degrees and retains its catalytically active structure.     

新的分离纯化青霉素酰化酶方法的研究

按0．6％(w／v)的比例将皂土加到青霉索酰化酶发酵上清液中,可将酶100％吸附,而吸附的蛋白质仅占发酵上清液中的10％左右。吸附时的pH和无机盐对酶的吸附影响不大。使用不同pH和种类的缓冲液洗涤皂土－酶复合物,不能将酶洗脱,但可洗脱15％左右吸附的杂蛋白。使用含10％以上的PEG和NaCl的磷酸缓冲液可将酶全部洗脱．酶纯化25倍,浓缩6倍左右。此法特点是简便,酶活力收率高,可在常温下操作,也可直接从未除菌体的发酵液中提取酶,具有工业应用价值。     

Cephalosporin C acylase and penicillin V acylase formation by Aeromonas sp. ACY 95

Aeromonas sp. ACY 95 produces constitutively and intracellularly a penicillin V acylase at an early stage of fermentation (12 h) and a cephalosporin C acylase at a later stage (36 h). Some penicillins, cephalosporin C and their side chain moieties/analogues, phenoxyacetic acid, penicillin V and penicillin G, enhanced penicillin V acylase production while none of the test compounds affected cephalosporin C acylase production. Supplementation of the medium with some sugars and sugar derivatives repressed enzyme production to varying degrees. The studies on enzyme formation, induction and repression, and substrate profile suggest that the cephalosporin C acylase and penicillin V acylase are two distinct enzymes. Substrate specificity studies indicate that the Aeromonas sp. ACY 95 produces a true cephalosporin C acylase which unlike the enzymes reported hitherto hydrolyses cephalosporin C specifically.The authors are with Research and Development, Hindustan Antibiotics Limited, Pimpri. Pune 411 018, India     

Optimization of a pseudo-affinity process for penicillin acylase purification

A pseudo-affinity process for penicillin acylase (EC 3.5.1.11) purification using an affinity ligand (Ampicillin) attached on Sepharose 4B-CNBr was optimized. The enzyme adsorption on this affiant (Amp-Seph) is independent of pH between 5.5 and 8.8, in 100?mM phosphate containing 22% (w/v) ammonium sulphate. The desorption of the penicillin acylase from the affinity gels was carried out, the best desorption results being obtained through a non specific eluent, 100?mM phosphate pH 4.6 with 15% (w/v) ammonium sulphate. The best purification results were obtained with an enzymatic extract, produced through osmotic shock of Escherichia coli cells (3.7?IU/mg prot). With this extract and an affinity gel of Sepharose 4B-CNBr derivatized with ampicillin (3.8?μmol/cm³?gel), a maximum activity capacity adsorbed of 20?IU/cm³?gel was obtained for initial values of activity and protein concentration of 1.7?IU/cm³ and 0.4?mg prot/cm³, respectively. With the optimized eluent it was possible to obtain penicillin acylase in only one purification step with a desorption yield of enzyme activity higher than 90%. The penicillin acylase produced with this process was characterized by a maximum purity of 34?IU/mg prot, corresponding to a purification degree higher than 150 in relation to the lowest pure enzymatic extract. The enzyme purity of the eluted fractions was certified by SDS gel electrophoresis and liquid chromatography through a Mono Q column in a FPLC apparatus. The gel electrophoresis presented 4 main stained bands with 2 corresponding to α and β subunits of the penicillin acylase with equivalent molecular weights of 27 and 63?kDa. No external diffusion resistance on penicillin acylase and total protein adsorption on this affiant (Amp-Seph 3.8?μmol/cm³?gel) were observed for continuous adsorption processes performed at two different agitation speeds (120 and 400?rpm).     

Studies on Amino Acids. XI.

As a part of the studies intending to clarify biological significance of the presence of acylase, enzymatic activity which hydrolyzes acyl amino acids, its activity in yeast was investigated. As a results, the occurrence in yeast of acylase activity was confirmed for the first time.

In order to study the enzymatic properties of this acylase activity, experiments were carried out with the enzyme preparation from brewer’s yeast. As a result of the investigation, yeast acylase was found to be able to hydrolyze a number of acyl amino acids, of these chloroacetyl derivatives especially readily, as in the case of previously studied acylase activity in other sources such as mold acylase. Several observations on the influence of metal ions and inhibitors, optical specificity and others were also presented.     

聚丙烯腈纤维固定化青霉素酰化酶性质的研究

将巨大芽孢杆菌（Bacillusmegaterium）青霉素酞化酶连接到聚丙烯腈纤维载体上,制成固定化青霉素酰化酶。其表现活力约为2000u／g。水解青霉素G的最适温度为50℃;最适PH为9．0;在PHS．5～10．3、温度50℃以下酶的活力稳定;表观米氏常数Ka为1．33×10-8mol／L;最大反应速度Vm为2．564mmol·min-1;苯乙酸为竞争性抑制剂,抑制常数为0．16mol／L。水解10％的青霉素G钾盐溶液,使用20批,保留酶活力80％。     

Kinetic characteristics and enantioselective action of penicillinase in the hydrolysis reaction of N-phenylacetyl derivatives of 1-aminoethylphosphonic acid and its esters

Penicillin acylase from E. coli (EC 3.5.1.11) was found to hydrolyze N-phenylacetylated 1-aminoethylphosphonic acid and its esters. The enzyme preferentially converts the R-form of the substrates: the ratios of the bimolecular rate constants of penicillin acylasecatalyzed hydrolysis of R- and S-forms of 1-(N-phenylacetamino)-ethylphosphonic acid and its dimethyl- and diisopropyl-esters are 58000, 2300, 1800; these derivatives were shown to have the greatest values of the catalytic constants for enzymatic hydrolysis of all known substrates for penicillin acylase: 237, 148 and 134 s-1; the corresponding Km values are 3.7 10(-5), 6.8 10(-4) and 6.2 10(-4) M at pH 7.0. The kinetics of enzymatic hydrolysis of 1-(N-phenylacetamino)-ethylphosphonic acid was investigated up to high degrees of conversion. The inhibition of penicillin acylase by high concentrations of the R-form of the substrate (with substrate inhibition constant of 0.07 M) and competitive inhibition by the reaction product, phenylacetic acid (Ki = 3.5 10(-5) M), was observed.     

Immobilization of penicillin acylase on acrylic carriers

Penicillin acylase obtained from E. Coli (E. C. 3.5.1.11) was covalently bound via glutaric aldehyde to acrylic carriers crosslinked with divinylbenzene or ethylene glycol dimethacrylate. The best enzymatic preparation was obtained by using ethyl acrylate/ ethylene glycol dimethacrylate copolymer. 1 cm³ of the carrier bound 6.4 mg of protein, having 72% activity in relation to the native enzyme. The preparation lost only 10% of its initial activity after 100 d of storage at 4°C. A negligible effect of immobilization on the enzyme activity at different temperatures or pH as well as significant increase of the stability of the immobilized enzyme at elevated temperatures were observed.Abbreviations BA butyl acrylate - AE ethyl acrylate - PA penicillin acylase - 6-APA 6-aminopenicillanic acid - EGDMA ethylene glycol dimethacrylate - DVB divinylbenzene     

Effects of site-directed mutations on processing and activities of penicillin G acylase from Escherichia coli ATCC 11105.

Penicillin G acylase from Escherichia coli ATCC 11105 is synthesized from its precursor polypeptide into a catalytically active heterodimer via a complex posttranslational processing pathway. Substitutions in the pair of aminoacyl residues at the cleavage site for processing the small and large subunits were made. Their processing phenotypes and penicillin G acylase activities were analyzed. By the introduction of a prolyl residue at either position, the processing of the small subunit was blocked without a change in enzymatic activity. Four other substitutions had no effect. At the site for processing the large subunit, four substitutions out of the seven examined blocked processing. In general, penicillin G acylase activity seemed to be proportional to the efficiency of the large-subunit-processing step. Ser-290 is an amino acid critical for processing and also for the enzymatic activity of penicillin G acylase. In the mutant pAATC, in which Ser-290 is mutated to Cys, the precursor is processed, but there is no detectable enzymatic activity. This suggests that there is a difference in the structural requirements for the processing pathway and for enzymatic activity. Recombination analysis of several mutants demonstrated that the small subunit can be processed only when the large subunit is processed first. Some site-directed mutants from which signal peptides were removed showed partial processing phenotypes and reduced enzymatic activities. Their expression showed that the prerequisite for penicillin G acylase activity is the efficient processing of the large subunit and that the maturation of the small subunit does not affect the enzymatic activity.     

Molecular cloning and analysis of the gene encoding the thermostable penicillin G acylase from Alcaligenes faecalis.

Alcaligenes faecalis penicillin G acylase is more stable than the Escherichia coli enzyme. The activity of the A. faecalis enzyme was not affected by incubation at 50 degrees C for 20 min, whereas more than 50% of the E. coli enzyme was irreversibly inactivated by the same treatment. To study the molecular basis of this higher stability, the A. faecalis enzyme was isolated and its gene was cloned and sequenced. The gene encodes a polypeptide that is characteristic of periplasmic penicillin G acylase (signal peptide-alpha subunit-spacer-beta subunit). Purification, N-terminal amino acid analysis, and molecular mass determination of the penicillin G acylase showed that the alpha and beta subunits have molecular masses of 23.0 and 62.7 kDa, respectively. The length of the spacer is 37 amino acids. Amino acid sequence alignment demonstrated significant homology with the penicillin G acylase from E. coli A unique feature of the A. faecalis enzyme is the presence of two cysteines that form a disulfide bridge. The stability of the A. faecalis penicillin G acylase, but not that of the E. coli enzyme, which has no cysteines, was decreased by a reductant. Thus, the improved thermostability is attributed to the presence of the disulfide bridge.     

Immobilization of penicillin G acylase on macro-mesoporous silica spheres

In this study, macro-mesoporous silica spheres were prepared with a micro-device and used as the support for the immobilization of penicillin G acylase (PGA). To measure the enzymatic activity, the silica spheres with immobilized PGA were placed into a packed-bed reactor, in which the hydrolysis of penicillin G was carried out. The influences of the residence time, the initial concentration of the substrate, the accumulation of the target product 6-aminopenicillanic acid, and the enzyme loading amount on the performance of the immobilized PGA were investigated. The introduction of macropores increased the enzyme loading amount and decreased the internal mass transfer resistance, and the results showed that the enzyme loading amount reached 895 mg/g (dry support), and the apparent enzymatic activity achieved up to 1033 U/g (dry support). In addition, the immobilized PGA was found to have great stability.     

聚丙烯腈纤维固定化青霉素酰化酶合成头孢氨苄的研究

将巨大芽孢杆菌胞外青霉素酰化酶通过共价键结合到聚丙烯腈纤维的衍生物上。制成的丝状固定化青霉素酰化酶表现活力达 1 5 3U g(湿重 )。固定化酶合成头孢氨苄的最适pH为 6 5 ,最适温度为 40℃。 7 ADCA的投料浓度以 4%为好 ,7 ADCA与PGME的投料量比率为1∶2 ,最佳用酶量为 1 70U g 7 ADCA。在pH6 5、温度 3 0℃时 ,固定化酶对 7 ADCA的表观米氏常数K7 ADCA为 0 1 6 2mol L ,对PGME的表观米氏常数KPGME为 0 3 6 4mol L ,最大反应速度Vmax为0 0 4 6 2mol·L- 1·min- 1,用固定化酶合成头孢氨苄 ,使用 5 0次保留酶活力 83 9%     

Mutant Escherichia coli penicillin acylase with enhanced stability at alkaline pH

Increased stability at alkaline pH should be a valuable attribute for the utilization of penicillin acylase in bioreactors employed to convert penicillins into 6-aminopenicillanic acid, a precursor of semisynthetic penicillins. In these systems, base is added for pH control, which results in local alkaline conditions that promote enzyme inactivation. Hydrolysis and synthesis reactions are also pH dependent. Here, we report work in which the gene coding for Escherichia coli penicillin acylase was subjected to oligonucleotide-directed random mutagenesis at regions coding for amino acids predicted to be at the surface of the enzyme. The resulting mutant library, cloned in E. coli, was screened by a filter paper assay of the colonies for the presence of penicillin acylase activity with enhanced stability at alkaline pH. Characterization of one of the selected clones revealed the presence of a mutation, Trp431-Arg, which would presumably alter the surface charge of the protein. In vitro experiments demonstrated a near twofold increase in the half-life of the mutant enzyme when stored at pH 8.5 as compared with the wild-type enzyme, with a comparable specific activity at several pH values. In general, the mutant displayed increased stability toward the basic side in the pH-stability profile. (c) 1995 John Wiley & Sons, Inc.     

pH stability of penicillin acylase from <Emphasis Type="Italic">Escherichia coli</Emphasis>

The inactivation kinetics of penicillin acylase from Escherichia coli have been investigated over a wide pH range at 25 and 50 degrees C. The enzyme was very stable in neutral solutions and quickly lost its catalytic activity in acidic and alkaline solutions. In all cases, the inactivation proceeded according to first order reaction kinetics. Analysis of the pH dependence of enzyme stability provides evidence that stable penicillin acylase conformation is maintained by salt bridges. Destruction of the salt bridges due to protonation/deprotonation of the amino acid residues forming these ion pairs causes inactivation by formation of the unstable "acidic" EH(4)(3+), EH(3)(2+), EH(2)(+) and "alkaline" E(-) enzyme forms. At temperatures above 35 degrees C penicillin acylase apparently undergoes a conformational change that is accompanied by destruction of one of these salt bridges and change in the catalytic properties.     

胞外青霉素酰化酶产生菌的选育

利用纸片显色方法,从土壤甲诀速筛选出98株产胞外青霉素酰化酶的菌种,经复筛其中10株酶活力较高,经鉴定均属于巨大芽孢杆菌。经单株分离得46号菌,用这株菌进行了产酶条件的研究,在最适产酶条件下,酶话力比开始提高了3．6倍。在此基础上又进行了物理化学因素处理,得突变株UL-81,酶活力达720u／1 Ooml发酵液。对原株和突变株进行比较,发现UL-81菌落、细胞形态、诱导剂苯乙酸用量及添加时间等明显不同于原株。在500L罐发酵酶活达8 20u／1OOml发酵液,为开始酶活的16倍。     

One-pot, two-step enzymatic synthesis of amoxicillin by complexing with Zn2+

A one-pot, two-step enzymatic synthesis of amoxicillin from penicillin G, using penicillin acylase, is presented. Immobilized penicillin acylase from Kluyvera citrophila was selected as the biocatalyst for its good pH stability and selectivity. Hydrolysis of penicillin G and synthesis of amoxicillin from the 6-aminopenicillanic acid formed and d-p-hydroxyphenylglycine methyl ester were catalyzed in situ by a single enzyme. Zinc ions can react with amoxicillin to form complexes, and the yield of 76.5% was obtained after optimization. In the combined one-pot synthesis process, zinc sulfate was added to remove produced amoxicillin as complex for shifting the equilibrium to the product in the second step. By controlling the conditions in two separated steps, the conversion of the first and second step was 93.8% and 76.2%, respectively. With one-pot continuous procedure, a 71.5% amoxicillin yield using penicillin G was obtained.     

Chromogenic analogues of penicillin dihydroF and penicillin K for the continuous spectrophotometric determination of aliphatic penicillin acylase activity

The synthesis of 2-nitro-5-[(hexanoyl)-amino]-benzoic acid and 2-nitro-5-[(octanoyl)-amino]-benzoic acid as chromogenic substrates for the determination of aliphatic penicillin acylase activity is described. During enzymatic hydrolysis, the released chromophore, 2-nitro-5-amino-benzoic acid, was detected at 405 nm. Penicillin acylase from Streptomyces lavendulae had an appreciable activity towards these substrates, which can then be used to detect penicillin acylases able to cleave hexanoyl and octanoyl residues off synthetic amides as well as penicillin dihydroF and penicillin K, their natural analogues.     

Chainia Penicillin V Acylase: Strain Characteristics, Enzyme Immobilization, and Kinetic Studies

Aerobic cultures of an actinomycete were found to produce penicillin V acylase (PVA) (PA, EC-3.5.1.11) extracellularly. The presence of L-2-3 diamino-propionic acid in cell wall and formation of sclerotia on culture media led to its identification as Chainia, a sclerotial Streptomyces. Partially purified acylase was adsorbed on kieselguhr and entrapped in polyacrylamide gel. The immobilized preparation proved effective with respect to retention of enzyme and enzyme activity even after 15 successful cycles. The pH optimum for crude enzyme was in the range of pH 7.5–8.0, and for the (NH4)₂ SO₄ fraction it was pH 8.5. The immobilized enzyme showed maximal activity at pH 9.5. The optimum temperature for acylase activity was at 55°C. The crude enzyme, ammonium sulfate fraction, and immobilized enzyme showed K _m value for penicillin V of 6.13 mM, 14.3 mM, and 17.1 mM, respectively. Received: 11 December 1997 / Accepted: 9 April 1998     

Thermal inactivation of immobilized penicillin acylase in the presence of substrate and products

Inactivation of immobilized penicillin acylase has been studied in the presence of substrate (penicillin G) and products (phenylacetic acid and 6-aminopenicillanic acid), under the hypothesis that substances which interact with the enzyme molecule during catalysis will have an effect on enzyme stability. The kinetics of immobilized penicillin acylase inactivation was a multistage process, decay constants being evaluated for the free-enzyme and enzyme complexes, from whose values modulation factors were determined for the effectors in each enzyme complex at each stage. 6-Aminopenicillanic acid and penicillin G stabilized the enzyme in the first stage of decay. Modulation factors in that stage were 0.96 for penicillin G and 0.98 for 6-aminopenicillanic acid. Phenylacetic acid increased the rate of inactivation in both stages, modulating factors being -2.31 and -2.23, respectively. Modulation factors influence enzyme performance in a reactor and are useful parameters for a proper evaluation. (c) 1996 John Wiley & Sons, Inc.