A Spectrophotometric Lipase Activity Assay by Coupled Lipase-Lipoxygenase in Reverse Micelles

A new, continuous spectrophotometric method is described for determining lipase activity using a reverse micelle system, in which lipase (EC 3.1.1.3) and lipoxygenase (EC 1.13.11.12) are dissolved. The reverse micelle system consists of 2-ethyl hexyl sodium sulfosuccinate (AOT)-isooctane and water. Trilinolein is used as the lipase substrate; linoleate hydroperoxide is the end product of the oxidation catalyzed by lipoxygenase, which acts as an auxiliary coupled-enzyme of lipase. The method appears useful both for detailed kinetic studies of lipase and for serial analyses using sunflower oil, a cheaper substrate. This assay offers the typical advantages of the continuous direct photometric methods in that it is rapid, reproducible and sufficiently sensitive for measuring lipase activity even in some crude commercial preparations.     

The Lipase/Lipoxygenase Bienzyme System in AOT Reversed Micelles in Octane

In this work it is shown that the bienzyme lipase/lipoxygenase system can function in reversed micelles of bis(2-ethyl)hexyl sulfosuccinate (AOT) in octane. As a lipase substrate, a fish fat preparation (fat of sea mammals) with a high content of polyunsaturated fatty acids was used. It was demonstrated that the bienzyme reaction proceeded in a stationary mode and had a rate-limiting step catalyzed by lipase. Under optimal conditions, the efficacy of functioning of the bienzyme system was by an order of magnitude higher than that in water. The lipase/lipoxygenase bienzyme system can be used as a new method of spectrophotometrical determination of lipase activity.     

The lipase/lipoxygenase bienzyme system in AOT reversed micelles in octane

In this work it is shown that the bienzyme lipase/lipoxygenase system can function in reversed micelles of bis(2-ethyl)hexyl sulfosuccinate (AOT) in octane. As a lipase substrate, a fish fat preparation (fat of sea mammals) with a high content of polyunsaturated fatty acids was used. It was demonstrated that the bienzyme reaction proceeded in a stationary mode and had a rate-limiting step catalyzed by lipase. Under optimal conditions, the efficacy of functioning of the bienzyme system was by an order of magnitude higher than that in water. The lipase/lipoxygenase bienzyme system can be used as a new method of spectrophotometric determination of lipase activity. The English version of the paper.     

Higher order structure of Mucor miehei lipase and micelle size in cetyltrimethylammonium bromide reverse micellar system

The higher order structure of Mucor miehei lipase and micelle size in a cationic cetyltrimethylammonium bromide (CTAB) reverse micellar system was investigated. Circular dichroic (CD) measurement revealed that the lipase far-UV CD spectra changed markedly, going from buffer solution to the reverse micellar solution, and were very similar for any organic solvent used. The ellipticity of the solubilized lipase in the far-UV region markedly decreased with increasing water content (W(0): molar ratio of water to CTAB), indicating that the secondary structure of lipase changed with the water content. The linear correlation between the W(0) and the micelle size was obtained by measuring dynamic light scattering. From the linear correlation between the micelle size and W(0), the higher order structure of the solubilized lipase appears to be affected directly by the micellar interface. The species and concentration of alcohol as a cosurfactant had an inferior effect on lipase structure. Especially, at ratios of 1-pentanol to CTAB of less than 8, the secondary and tertiary structures of lipase were preserved in the reverse micelles. The CTAB concentration had little effect on the lipase structure in the micelles. The catalytic activity of the lipase solubilized in the CTAB reverse micelles increased with increasing the W(0).     

Activity of lipoxygenase incorporated into reversed micelles of aerosol OT in octane

Soybean lipoxygenase (EC 1.13.11.12) incorporated into the reversed micelles of aerosol OT in octane has been studied for its catalytic properties. The enzyme is shown to preserve up to 10% activity as compared with the activity in the aqueous solution. In this case Km of lipoxygenase for linoleic acid increases from 10(-5) M to 5 X 10(-4) M. The activity of lipoxygenase is maximal, the aerosol OT concentration being 0.03 M and a degree of reversed micelle hydratation 40. Cationic detergents of the cetyltrimethyl ammonium bromide type are not good to form reversed micelles of lipoxygenase, since they inhibit the latter with IC50 = (4 divided by 6) x 10(-4) M. The lipoxygenase preparations in reversed micelles of aerosol OT in octane may be used to synthesize natural metabolites of polyunsaturated fatty acids, for instance of eicosanoids.     

A novel and simple colorimetric assay for human serum lipase.

A new and simple colorimetric method for human serum lipase [EC 3.1.1.3] assay has been developed, using 2,3-dimercaptopropan-1-ol tributyroate as a substrate, 5,5'-dithiobis(2-nitro-benzoic acid) as a chromogenic reagent, phenylmethylsulfonyl fluoride as an inhibitor of serum esterases, and sodium dodecylsulfate as a lipase activator. The method requires only 50 micron1X2 of serum sample and a reaction time of less than 30 min. The method is reproducible and sensitive enough to measure low levels of lipase activity in normal and abnormal sera. The gel filtration of serum samples on a Sephadex G-200 column gave one peak of lipase activity, when measured by the present method, and the molecular weight of the enzyme was identical with that of lipase of human pancreatic origin, confirming the specificity of this new method for the serum lipase.     

Effective method for activity assay of lipase from Chromobacterium viscosum.

A method was devised for activity assay of the lipase [triacylglycerol acyl-hydrolase, EC 3.1.1.3] excreted from Chromobacterium viscosum into the culture medium; olive oil emulsified with the aid of Adekatol 45-S-8 (a non-ionic detergent, the ethoxylate of linear sec-alcohols having chain lengths of 10--16 carbon atoms) was used as the substrate. This method was specifically effective for Chromobacterium lipase acitvity assay, and was approximately twice as sensitive as the conventional method, in which polyvinyl alcohol is used for the emulsification of the substrate.     

Phospholipase C and diacylglycerol lipase activities associated with plasma membranes of chromaffin cells isolated from bovine adrenal medulla

The plasma membranes of bovine adrenal chromaffin cells were isolated and the activities of enzymes involved in arachidonic acid liberation were investigated. Only a minute activity of phospholipase A2 (phosphatide 2-acylhydrolase, EC 3.1.1.4) could be detected using externally added phosphatidylcholine (PC) and phosphatidylethanolamine (PE) as substrate. When membranes were treated with exogenous phospholipase C (orthophosphoric acid diester phosphohydrolase, EC 3.1.4.1) there was a liberation of free fatty acids from the sn-2 position of PC. The enzyme responsible for this effect could be demonstrated to be a diacylglycerol lipase (glycerol ester hydrolase, EC 3.1.1.3) localized in the plasma membrane. Using phosphatidylinositol (PI) as a substrate, it was found that an endogenous phospholipase C exists which co-purifies with the membrane preparation. The produced diacylglycerol is subsequently hydrolyzed by diacylglycerol lipase liberating arachidonic acid. The two enzymes, phospholipase C and diacylglycerol lipase were characterized. Phospholipase C was found to be calcium dependent and PI specific, showing an activity of 60 pmol/micrograms protein per h (1.2 mM Ca2+), whereas the diacylglycerol lipase was calcium independent hydrolyzing diacylglycerol at a rate of 7.2 pmol/micrograms protein per h. The lipase but not the phospholipase C was inhibited 50% by 1.7 mM para-bromophenacylbromide.     

Characterization of turkey pancreatic lipase

Turkey pancreatic lipase (TPL) was purified from delipidated pancreases. Pure TPL (glycerol ester hydrolase, EC 3.1.1.3) was obtained after ammonium sulfate fractionation, Sephacryl S-200 gel filtration, anion exchange chromatography (DEAE-Sepharose) and size exclusion column using high performance liquid chromatography system (HPLC). The pure lipase, which is not a glycoprotein, was presented as a monomer having a molecular mass of about 45 kDa. The lipase activity was maximal at pH 8.5 and 37 degrees C. TPL hydrolyses the long chains triacylglycerols more efficiently than the short ones. A specific activity of 4300 U/mg was measured on triolein as substrate at 37 degrees C and at pH 8.5 in the presence of colipase and 4 mM NaTDC. This enzyme presents the interfacial activation when using tripropionin as substrate. TPL was inactivated when the enzyme was incubated at 65 degrees C or at pH less than 5. Natural detergent (NaTDC), synthetic detergent (Tween-20) or amphipatic protein (beta-lactoglobulin A) act as potent inhibitors of TPL activity. To restore the lipase activity inhibited by NaTDC, colipase should be added to the hydrolysis system. When lipase is inhibited by synthetic detergent or protein, simultaneous addition of colipase and NaTDC was required to restore the TPL activity. The first 22 N-terminal amino acid residues were sequenced. This sequence was similar to those of mammal's pancreatic lipases. The biochemical properties of pancreatic lipase isolated from bird are similar to those of mammals.     

Is lipoxygenase involved in the formation of ethylene from ACC?

Freezing or desiccation of winter rape leaves ( Brassica napus L. var. oleifera (cv. Górczanski) stimulated both lipoxygenase (EC 1.13.11.12) activity and ethylene formation during the post-stress period. The effect depended on the degree of membrane injury. In tissues showing injury less than 50% (as checked with the electrical conductivity method) both activities increased according to the degree of stress-induced damage. In leaves injured to a higher degree both activities decreased. Light and low temperature (5°C) inhibited the development of both lipoxygenase activity and ethylene formation in leaf disks stored for 20 h. Ethylene formation was also observed in a model system where soybean lipoxygenase was added to a mixture containing 1-aminocyclopropane-1-carboxylic acid and linoleic or linolenic acid as substrate for lipoperoxide formation. Changes in pH and temperature conditions of the incubation mixture caused similar differences in the lipoxygenase activity and ethylene formation. We propose that the stimulation of lipoxygenase-catalysed oxidation of polyunsaturated fatty acids (increasing free radical formation) leads to an increased ethylene production from ACC.     

Study on immunocapture-chemiluminescence assay of lipase activity in a biological sample.

A new approach for the determination of lipase (triacylglycerol lipase, EC.3.1.1.3) activity in a biological sample was investigated by combining an immunocapture technique with a chemiluminescence (CL) assay method in order to eliminate interference with CL detection. The proposed method consists of an immunocapture step to trap lipase and a subsequent step for CL detection of the activity of the captured lipase. The CL detection is based on the luminol-hydrogen peroxide (H(2)O(2))-horseradish peroxidase (HRP) reaction and utilizes a proenhancer substrate [a lauric acid ester of 2-(4-hydroxyphenyl)-4,5-diphenylimidazole (HDI)] which liberates an active enhancer, HDI, by enzymatic hydrolysis. A polyclonal antibody prepared with porcine pancreas lipase was used for the immunocapture. The proposed immunocapture-CL method effectively eliminated the interference with the CL reaction from biological components and enabled the determination of spiked porcine pancreas lipase activity in serum samples in the range 0.41-1.1 U(HDI) (1 U(HDI) corresponds to the amount which liberates 1 pmol HDI/min at 37 degrees C from the substrate). The method was further applied to the assay of the activity for human pancreas lipase in serum and the results showed good correlation (r = 0.871) with those by the conventional colorimetric method.     

Identification of catalytically active groups of wheat (Triticum aestivum L.) germ lipase

The active site of wheat germ lipase was studied by the Dixon method and chemical modification. The profile of curve logV = f(pH), pK and ionization heat values, lipase photoinactivation, and lipase inactivation with diethylpyrocarbonate and dicyclohexylcarbodiimide led us to assume that the active site of the enzyme comprises the carboxylic group of aspartic or glutamic acid and the imidazole group of histidine. Apparently, the OH-group of serine plays a key role in catalysis: as a result of incubation for 1 h in the presence of phenylmethylsulfonyl fluoride, the enzyme activity decreased by more than 70%. It is shown that ethylenediamine tetraacetate is a noncompetitive inhibitor of lipase. Wheat germs are very healthful because they are rich in vitamins, essential amino acids, and proteins. For this reason, wheat germs are widely used in food, medical, and feed mill industries [1-3]. However, their use is limited by instability during storage, which is largely determined by the effect of hydrolytic and redox enzymes. Representative enzymes of this group are lipase (glycerol ester hydrolase, EC 3.1.1.3), which hydrolyzes triglycerides of higher fatty acids, and lipoxygenase (EC 1.13.11.13), which oxidizes polyunsaturated higher fatty acids.     

Continuous hydrolysis of oil by immobilized lipase in a countercurrent reactor

Lipase from Pseudomonas fluorescens biotype I was immobilized by adsorption of anion exchange resin using glutaraldehyde to enhance the adsorption. The activity yield of the immobilized lipase was very low (below 1%) when lipase activity was measured using emulsion substrate. The activity yield was 10-70% when lipase activity was measured using non-emulsion substrate. Countercurrent reactors for hydrolysis of oil using non-emulsion substrate were studied. A fluidized bed reactor was found to be superior to a fixed bed one since in a fixed bed reactor the separation rate of the two layers was slow and the flow rate of the reactor had to be slower than the separation rate. A fluidized bed reactor system equipped with settling compartments and stirring compartments was devised. Continuous lipolysis at 60 degrees C and continuous separation of oily product and water soluble product were performed. After continuous operation for more than 3 months, 70% of the initial activity of the immobilized lipase was observed at the end of the reaction.     

A broad pH range indicator-based spectrophotometric assay for true lipases using tributyrin and tricaprylin

A continuous assay is proposed for the screening of acidic, neutral, or alkaline lipases using microtiter plates, emulsified short- and medium-chain TGs, and a pH indicator. The lipase activity measurement is based on the decrease of the pH indicator optical density due to protonation which is caused by the release of FFAs during the hydrolysis of TGs and thus acidification. Purified lipases with distinct pH optima and an esterase were used to validate the method. The rate of lipolysis was found to be linear with time and proportional to the amount of enzyme added in each case. Specific activities measured with this microplate assay method were lower than those obtained by the pH-stat technique. Nevertheless, the pH-dependent profiles of enzymatic activity were similar with both assays. In addition, the substrate preference of each enzyme tested was not modified and this allowed discriminating lipase and esterase activities using tributyrin (low water solubility) and tricaprylin (not water soluble) as substrates. This continuous lipase assay is compatible with a high sample throughput and can be applied for the screening of lipases and lipase inhibitors from biological samples.     

Lipase-catalyzed esterification of fatty acid in DMSO (dimethyl sulfoxide) modified AOT reverse micellar systems

AOT reverse micellar system was modified with DMSO for improved esterification activity of Chromobacterium viscosum lipase (glycerol-ester hydrolase, EC 3.1.1.3). The enzymatic activity was strongly affected by the concentration of DMSO, and maximum activity was obtained at 30-40 mM. The various relevant physical parameters such as w₀ (molar ratio of water to AOT), pH and reaction temperature that influence the activity of lipase were studied in order to obtain the best value and compared with those in simple AOT reverse micelles. The apparent activation energy decreased in the presence of DMSO. The stability of lipase entrapped in modified AOT systems was excellent, and the half-life was about 3.25 times than that observed in simple AOT systems at 25°C. A simple first-order deactivation model was considered to determine the deactivation rate constant. The thermodynamic stability of lipase in reverse micelles was measured by the Gibbs free energy. A fluorescence study was performed to provide information on structural changes in AOT reverse micelles which was accompanied by the addition of DMSO.     

A fluorometric method of determining cholesterol esterase activity]

A simple and highly specific method for estimating the cholesterol esterase activity is suggested. Cholesterol esterase (EC 3.1.1.13) is incubated with the emulsified substrate, cholesteryl-o-coumarate, at pH 6.6 to yield o-coumaric (trans-2-hydroxycinnamic) acid detected fluorimetrically (lambda exc 363 nm, lambda em 494 nm) at pH 10.4. The fluorescence associated with the unhydrolyzed substrate is negligible. Cholesteryl-o-coumarate is not hydrolyzed by pancreatic lipase, trypsin, or chymotrypsin under the above conditions. About 1 microgram of pancreatic cholesterol esterase can be determined upon 15 min incubation. The substrate was synthesized by condensation of o-acetoxy-trans-cinnamic acid with cholesterol using the di-tert-butyl pyrocarbonate--pyridine--4-dimethylaminopyridine system.     

The activity of lipoxygenase in Arabidopsis thaliana (L.) Heynh -- a preliminary study

The activity of lipoxygenase (EC 1.13.11.12) in Arabidopsis thaliana (L.) Heynh seedlings and mature plants was estimated spectrophotometrically at 234 nm. Linoleic acid was used as a substrate. Lipoxygenase activity showed two pH optima: at 7.0 and 10.0 in seedlings, and at pH 8.0 and 10.0 in leaves of mature plants. Seven-week-old plants were transferred to a hydroponic system and treated with different concentrations of Cd(2+) or Cu(2+) [in microM]: 0, 5, 25, 50, 100 for 7 days. The lipoxygenase activities at pH 8.0 and 10.0 depended on the metal that was added to the nutrient solution. The main change in lipoxygenase activity was under Cd(2+)stress at pH 8.0 and under Cu(2+)excess at pH 10.0.     

Effect of aprotic solvents on the enzymatic activity of lipase in AOT reverse micelles

The modification of reverse micellar systems composed of AOT, isooctane, water by the addition of aprotic solvents has been performed. The impact of this change on the activity, stability and kinetics of solubilized Chromobacterium viscosum lipase (glycerol-ester hydrolase, EC 3.1.1.3) was investigated. Of seven aprotic solvents tested, dimethyl sulfoxide (DMSO) was found to be most effective. It was found that lipase activity was enhanced by optimizing some relevant parameters, such as water–AOT molar ratio (W₀), buffer pH and surfactant concentration. A kinetic model that considers the free substrate in equilibrium with the substrate adsorbed on the micellar surface was successfully used to deduce some kinetic parameters (V_max, K_m and K_ad), and the values of K_m and K_ad were significantly reduced by the presence of DMSO. Higher lipase stability was found in AOT reverse micelles with DMSO compared with that in simple AOT systems with half-life of 125 and 33 days, respectively. Fluorescence spectroscopy and Fourier transform infrared spectroscopy (FT-IR) were used to elucidate the effects of DMSO on the properties of AOT reverse micelles.     

Enzymatic resolution of (S)-(+)-naproxen in a continuous reactor

An enzymatic method for the continuous production of (S)-(+)-2-(6-methoxy-2-naphthyl) propionic acid (Naproxen) has been developed. The process consists of a stereoselective hydrolysis of the racemic Naproxen ethoxyethyl ester catalyzed by Candida cylindracea lipase. The reaction has been carried out in a continuous-flow closed-loop column bioreactor packed with Amberlite XAD-7, a slightly polor resin on which the lipase has been immobilized by adsorption. Various immobilization conditions as well as the properties of the immobilized lipase have been studied. The performance and the productivity of the bioreactor were evaluated as a function of the critical reaction parameters such as temperature, substrate concentration, and product inhibition. By using a 500-mL column bioreactor, 1.8 kg of optically pure (S)-(+)-Naproxen were produced after 1200 h of continuous operation with a slight loss of the enzymatic activity.     

Production and purification of a novel extracellular lipase from Alternaria brassicicola

Alternaria brassicicola produced higher quantities (3.2 U/ml) of an inducible extracellular lipase (EC 3.1.1.3) in shaken synthetic medium supplemented with 20 mM methyloleate. After purification, the M r of the lipase was determined as 80 kDa by SDS-PAGE and estimated at 85 kDa using gel filtration, which suggest that the enzyme may be a monomer. The optimum pH and temperature for activity of the enzyme were 9.0 and 25ºC, respectively. Using umbelliferone esters, the lipase was shown highly specific towards a synthetic substrate with long-chain unsaturated fatty acid.