Characteristics of Lipase-Catalyzed Glycerolysis of Triglyceride in AOT-Isooctane Reversed Micelles

Chromobacterium viscosum lipase, solubilized in microemulsion droplets of glycerol containing small amounts of water and stabilized by a surfactant, could catalyze the glycerolysis of triolein. Kinetic analysis of the lipase-catalyzed reaction was possible in the reversed micellar system. Among surfactants and organic solvents tested, bis(2-ethylhexyl)sodiumsulfosuccinate (AOT) and isooctane were respectively most effective, for the glycerolysis of triolein in reversed micelles. Temperature effects, pH profile, K_m,app, and V_max,app were determined. Among various chemical compounds, Fe³⁺, Cu²⁺, and Hg²⁺ inhibited the lipase-catalyzed glycerolysis severely. However, the glycerolysis activity was partially restorable by adding histidine or glycine to the system containing these metal ions. The glycerolysis activity was dependent on water content and maximum activity was obtained at an R value of 1.21. Higher stability of the lipase was obtained in the reversed micellar system.     

Purification and Biochemical Characterization of Digestive Lipase in Whiteleg Shrimp

Penaeus vannamei lipase was purified from midgut gland of whiteleg shrimp. Pure lipase (E.C. 3.1.1.3) was obtained after Superdex 200 gel filtration and Resource Q anionic exchange. The pure lipase, which is a glycosylated molecule, is a monomer having a molecular mass of about 44.8 kDa, as determined by SDS-PAGE analysis. The lipase hydrolyses short and long-chain triacylglycerols and naphthol derivates at comparable rates. A specific activity of 1787 U mg⁻¹ and 475 U mg⁻¹ was measured with triolein and tributyrin as substrates, respectively, at pH 8.0 and 30°C in the absence of colipase. The lipase showed a K _{m, app} of 3.22 mM and k _{cat, app}/K _{m, app} of 0.303 × 10³ mM⁻¹ s⁻¹ using triolein as substrate. Natural detergents, such as sodium deoxycholate, act as potent inhibitors of the lipase. This inhibition can be reversed by adding fresh oil emulsion. Result with tetrahydrolipstatin, an irreversible inhibitor, suggests that the lipase is a serine enzyme. Peptide sequences of the lipase were determined and compared with the full-length sequence of lipase which was obtained by the rapid amplification of cDNA ends method. The full cDNA of the pvl was 1,186 bp, with a deduced protein of 362 amino acids that includes a consensus sequence (GXSXG) of the lipase superfamily of α/β-hydrolase. The gene exhibits features of conserved catalytic residues and high homology with various mammalian and insect lipase genes. A potential lid sequence is suggested for pvl.     

Kinetics of lipase-catalyzed hydrolysis of palm oil in lecithin/izooctane reversed micelles

Candida rugosa lipase has been used to investigate the hydrolysis of palm oil in a lecithin/isooctane reversed micellar system. The reaction obeys Michaelis-Menten kinetics for the initial conditions. Kinetic parameters such as maximum rate and Michaelis constant (K _m) were determined for lipase-catalyzed hydrolysis in n-hexane and isooctane. According to the K _m values, the enzyme affinity towards the substrate was increased in isooctane. The maximum degree of hydrolysis was generally decreased as the initial substrate concentration was increased. This may suggest that the hydrolysis in lecithin reversed micelles should be regarded as a one-substrate first-order reversible reaction. It is shown in this study that the proposed one-substrate first-order kinetic model can serve for the precise prediction of the degree of hydrolysis for a known reaction time or vice versa, when the initial substrate concentration is less than 0.325 mol/dm³. A disagreement with this model was found when the initial substrate concentration was higher than approximately 0.3 mol/dm³. This may be due to the effects of the products on lipase activity or even to the conversion of the reversed micellar system to other systems. Received: 16 May 1997 / Received revision: 22 October 1997 / Accepted: 24 October 1997     

Cloning,expression and characterization of a new lipase from <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis>

Bioinformatic analysis of the Yarrowia lipolytica CLIB122 genome has revealed 18 putative lipase genes all of which were expressed in Escherichia coli and screened for hydrolyzing activities against p-nitrophenyl-palmitate. One positive transformant containing an ORF of 1,098 bp encoding a protein of 365 amino acids was obtained. To characterize its enzymatic properties, the lipase gene was functionally expressed in Pichia pastoris. The resulting lipase exhibited the highest activity towards p-NP-decanoate at pH 7 and 35°C. In addition, the new lipase had a lower optimal temperature and pH compared to other Y. lipolytica lipases. It was noticeably enhanced by Ca²⁺, but was inhibited by PMSF, Hg²⁺ and Ni²⁺. The new lipase displayed the 1,3-specificity for triolein.     

Probing a functional role of Glu87 and Trp89 in the lid ofHumicola lanuginosa lipase through transesterification reactions in organic solvent

To reveal the functional role of Glu87 and Trp89 in the lid ofHumicola lanuginosa lipase, site-directed mutagenesis at Glu87 and Trp89 was carried out. The catalytic performance of wild-type and mutated lipases was studied in transesterification reactions in cyclohexane at a controlled water activity. Two different acyl donors were used in the investigation: tributyrin, a natural substrate for a lipase, and vinyl butyrate, an activated ester suitable for fast and efficient lipase-catalyzed transformations in preparative organic synthesis. As acyl acceptor 1-heptanol was used. The Glu87Ala mutation decreased theV _max,app value with tributyrin and vinyl butyrate by a factor of 1.5 and 2, respectively. TheK _m,app for tributyrin was not affected by the Glu87Ala mutation, but theK _m,app for vinyl butyrate increased twofold compared to the wild-type lipase. Changing Trp89 into a Phe residue afforded an enzyme with a 2.7- and 2-fold decreasedV _max,app with the substrates tributyrin and vinyl butyrate, respectively, compared to the wild-type lipase. No significant effects on theK _m,app values for tributyrin or vinyl butyrate were seen as a result of the Trp89Phe mutation. However, the introduction of a Glu residue at position 89 in the lid increased theK _m,app for tributyrin and vinyl butyrate by a factor of >5 and 2, respectively. The Trp89Glu mutated lipase could not be saturated with tributyrin within the experimental conditions (0–680 mM) studied here. With vinyl butyrate as a substrate theV _max,app was only 6% of that obtained with wild-type enzyme.     

Adverse effect of chloride impurities on lipase-catalyzed transesterifications in ionic liquids

The adverse influence of chloride impurities on the lipase-catalyzed transesterification in ionic liquid is described. The activity of lipase from Rhizomucor miehei exponentially decreased with increasing Cl⁻ content in 1-octyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl] amide, [Omim][Tf₂N], and the activity of lipase in [Omim][Tf₂N] mixture containing 2% [Omim] [Cl] was only about 2% of the activity in pure [Omim][Tf₂N]. The activity of lipase from Candidantarctica linearly decreased at about 5% with every 1% increase in [Omim][Cl] with there being no activity in [Omim][Tf₂N] containing about 20% [Omim][Cl].     

Substrate Specificity and Mode of Action of the Lipase Produced by Pseudomonas fragi22.39 B

The lipase purified from Pseudomonas fragi 22.39 B hydrolyzed not only triglycerides but also synthetic esters such as Tween, Span and methyl oleate. Of the saturated monoacid triglycerides tested, tributyrin was hydrolyzed most quickly. The lipase did not produce 1,3-diolein as a hydrolysis product from triolein. The addition of the Ca²⁺ ion to the reaction mixture promoted the hydrolysis rate for triglycerides and monoesters with longer-chain fatty acids (C₁₄, C₁₆, C₁₈). The enzyme could hydrolyze various kinds of natural fats and oils, and the extent their hydrolysis reached above 90%.     

Purification and Characterisation of an F16L Mutant of a Thermostable Lipase

A mutant of the lipase from Geobacillus sp. strain T1 with a phenylalanine to leucine substitution at position 16 was overexpressed in Escherichia coli strain BL21(De3)pLysS. The crude enzyme was purified by two-step affinity chromatography with a final recovery and specific activity of 47.4 and 6,315.8 U/mg, respectively. The molecular weight of the purified F16L lipase was approximately 43 kDa by 12% SDS-PAGE analysis. The F16L lipase was demonstrated to be a thermophilic enzyme due its optimum temperature at 70 °C and showed stability over a temperature range of 40–60 °C. The enzyme exhibited an optimum pH 7 in phosphate buffer and was relatively stable at an alkaline pH 8–9. Metal ions such as Ca²⁺, Mn²⁺, Na⁺, and K⁺ enhanced the lipase activity, but Mg²⁺, Zn²⁺, and Fe²⁺ inhibited the lipase. All surfactants tested, including Tween 20, 40, 60, 80, Triton X-100, and SDS, significantly inhibited the lipolytic action of the lipase. A high hydrolytic rate was observed on long-chain natural oils and triglycerides, with a notable preference for olive oil (C18:1; natural oil) and triolein (C18:1; triglyceride). The F16L lipase was deduced to be a metalloenzyme because it was strongly inhibited by 5 mM EDTA. Moderate inhibition was observed in the presence of PMSF at a similar concentration, indicating that serine residues are involved in its catalytic action. Further, the activity was not impaired by water-miscible solvents, including methanol, ethanol, and acetone.     

Cloning,expression, and characterization of Aureobasidium melanogenum lipase in Pichia pastoris

cDNA of Aureobasidium melanogenum lipase comprises 1254 bp encoding 417 amino acids, whereas genomic DNA of lipase comprises 1311 bp with one intron (57 bp). The lipase gene contains a putative signal peptide encoding 26 amino acids. The A. melanogenum lipase gene was successfully expressed in Pichia pastoris. Recombinant lipase in an inducible expression system showed the highest lipase activity of 3.8 U/mL after six days of 2% v/v methanol induction. The molecular mass of purified recombinant lipase was estimated as 39 kDa using SDS-PAGE. Optimal lipase activity was observed at 35–37 °C and pH 7.0 using p-nitrophenyl laurate as the substrate. Lipase activity was enhanced by Mg²⁺, Mn²⁺, Li⁺, Ca²⁺, Ni²⁺, CHAPS, DTT, and EDTA and inhibited by Hg²⁺, Ag⁺, SDS, Tween 20, and Triton X-100. The addition of 10% v/v acetone, DMSO, p-xylene, and octanol increased lipase activity, whereas that of propanol and butanol strongly inhibited it.     

A thermoalkaliphilic lipase of <Emphasis Type="Italic">Geobacillus</Emphasis> sp. T1

A thermoalkaliphilic T1 lipase gene of Geobacillus sp. strain T1 was overexpressed in pGEX vector in the prokaryotic system. Removal of the signal peptide improved protein solubility and promoted the binding of GST moiety to the glutathione-Sepharose column. High-yield purification of T1 lipase was achieved through two-step affinity chromatography with a final specific activity and yield of 958.2 U/mg and 51.5%, respectively. The molecular mass of T1 lipase was determined to be approximately 43 kDa by gel filtration chromatography. T1 lipase had an optimum temperature and pH of 70°C and pH 9, respectively. It was stable up to 65°C with a half-life of 5 h 15 min at pH 9. It was stable in the presence of 1 mM metal ions Na⁺, Ca²⁺, Mn²⁺, K⁺ and Mg²⁺ , but inhibited by Cu²⁺, Fe³⁺ and Zn²⁺. Tween 80 significantly enhanced T1 lipase activity. T1 lipase was active towards medium to long chain triacylglycerols (C10–C14) and various natural oils with a marked preference for trilaurin (C12) (triacylglycerol) and sunflower oil (natural oil). Serine and aspartate residues were involved in catalysis, as its activity was strongly inhibited by 5 mM PMSF and 1 mM Pepstatin. The T _m for T1 lipase was around 72.2°C, as revealed by denatured protein analysis of CD spectra.     

Probing a functional role of Glu87 and Trp89 in the lid ofHumicola lanuginosa lipase through transesterification reactions in organic solvent

To reveal the functional role of Glu87 and Trp89 in the lid ofHumicola lanuginosa lipase, site-directed mutagenesis at Glu87 and Trp89 was carried out. The catalytic performance of wild-type and mutated lipases was studied in transesterification reactions in cyclohexane at a controlled water activity. Two different acyl donors were used in the investigation: tributyrin, a natural substrate for a lipase, and vinyl butyrate, an activated ester suitable for fast and efficient lipase-catalyzed transformations in preparative organic synthesis. As acyl acceptor 1-heptanol was used. The Glu87Ala mutation decreased theV _max,app value with tributyrin and vinyl butyrate by a factor of 1.5 and 2, respectively. TheK _m,app for tributyrin was not affected by the Glu87Ala mutation, but theK _m,app for vinyl butyrate increased twofold compared to the wild-type lipase. Changing Trp89 into a Phe residue afforded an enzyme with a 2.7- and 2-fold decreasedV _max,app with the substrates tributyrin and vinyl butyrate, respectively, compared to the wild-type lipase. No significant effects on theK _m,app values for tributyrin or vinyl butyrate were seen as a result of the Trp89Phe mutation. However, the introduction of a Glu residue at position 89 in the lid increased theK _m,app for tributyrin and vinyl butyrate by a factor of >5 and 2, respectively. The Trp89Glu mutated lipase could not be saturated with tributyrin within the experimental conditions (0–680 mM) studied here. With vinyl butyrate as a substrate theV _max,app was only 6% of that obtained with wild-type enzyme.     

Immobilization of lipase Eversa Transform 2.0 on poly(urea–urethane) nanoparticles obtained using a biopolyol from enzymatic glycerolysis

In this work, the free lipase Eversa^® Transform 2.0 was used as a catalyst for enzymatic glycerolysis reaction in a solvent-free system. The product was evaluated by nuclear magnetic resonance (¹H NMR) and showed high conversion related to hydroxyl groups. In sequence, the product of the glycerolysis was used as stabilizer and biopolyol for the synthesis of poly(urea–urethane) nanoparticles (PUU NPs) aqueous dispersion by the miniemulsion polymerization technique, without the use of a further surfactant in the system. Reactions resulted in stable dispersions of PUU NPs with an average diameter of 190 nm. After, the formation of the PUU NPs in the presence of concentrated lipase Eversa^® Transform 2.0 was studied, aiming the lipase immobilization on the NP surface, and a stable enzymatic derivative with diameters around 231 nm was obtained. The hydrolytic enzymatic activity was determined using ρ-nitrophenyl palmitate (ρ-NPP) and the immobilization was confirmed by morphological analysis using transmission electron microscopy and fluorescence microscopy.

     

Characteristics of lipase-catalyzed hydrolysis of olive oil in AOT-isooctane reversed micelles

Candida rugosa lipase solubilized in organic solvents in the presence of both surfactant and water could catalyze the hydrolysis of triglycerides, and kinetic analysis of the lipase-catalyzed reaction was found to be possible in this system. Among eight organic solvents tested, isooctane was most effective for the hydrolysis of olive oil in reversed micelles. Temperature effect, pH profile, K(m,app) and V(max,app) were determined. Among various chemical compounds, Cu(2+), Hg(2+), and Fe(3+) inhibited lipase severely. But the enzyme activity was restorable partially by adding histidine or glycine to the system containing these metal ions. The enzyme activity was dependent on R (molar ratio of water to surfactant) and maximum activity was obtained at R = 10.5. Upon addition of glycerol to the reversed micelles, lipase activity was affected in a different fashion depending on the R values. Stability of the lipase in reversed micelles was also dependent on R, and it was most stable at R = 5.5.     

Gene cloning,expression and characterization of a cold-adapted lipase from a psychrophilic deep-sea bacterium Psychrobacter sp. C18

A psychrophilic bacterium Psychrobacter sp. C18 previously isolated from the Southern Okinawa Trough deep-sea sediments showed extracellular lipolytic activity towards tributyrin. A genomic DNA library was constructed and screened to obtain the corresponding lipase gene. The sequenced DNA fragment contains an open reading frame of 945 bp, which was denoted as the lipX gene, from which a protein sequence LipX was deduced of 315 amino acid residues with a molecular mass of 35,028 Da. This protein contained the bacterial lipase GNSMG (GxSxG, x represents any amino acid residue) and HG consensus motifs. The recombinant pET28a(+)/lipX gene was overexpressed in heterologous host Escherichia coli BL21 (DE3) cells to overproduce the lipase protein LipX_His with a 6× histidine tag at its C-terminus. Nickel affinity chromatography was used for purification of the expressed recombinant lipase. The maximum lipolytic activity of the purified recombinant lipase was obtained at temperature of 30°C and pH 8.0 with p-nitrophenyl myristate (C14) as a substrate. Thermostability assay indicated that the recombinant LipX_His is a cold-adapted lipase, which was active in 10% methanol, ethanol, acetone and 30% glycol, and inhibited partially by Zn²⁺, Co²⁺, Mn²⁺, Fe³⁺ and EDTA. Most non-ionic detergents, such as DMSO, Triton X-100, Tween 60 and Tween 80 enhanced the lipase activity but 1% SDS completely inhibited the enzyme activity. Additionally, the highest lipolytic rate of the recombinant LipX_His lipase was achieved when p-nitrophenyl myristate was used as a substrate, among all the p-nitrophenyl esters tested.     

Effects of oils and oil-related substrates on the synthetic activity of membrane-bound lipase from Rhizopus chinensis and optimization of the lipase fermentation media

The lipase from filamentous fungi Rhizopus chinensis, as a membrane-bound enzyme, possesses the excellent catalysis ability for esterification and transesterification reactions, and has a good potential in many industrial applications. In order to improve the synthetic activity of the lipase, the effects of oils and oil-related substrates on its production and the fermentation media optimization were investigated. Based on the results, it was suggested that oleic acid could be the important substrate for the lipase production. Among various oils and oil-related substrates, olive oil containing high content of oleic acid was the optimal one for the lipase production. Using orthogonal test and response surface methodology (RSM), the composition of fermentation media was further optimized. The optimized media for lipase synthetic activity and activity yield was composed of peptone 57.94 and 55.58 g L⁻¹, olive oil 21.94 and 22.99 g L⁻¹, maltose 12.91 and 14.34 g L⁻¹, respectively, with K₂HPO₄ 3 g L⁻¹, MgSO₄·7H₂O 5 g L⁻¹ and initial pH 6.0. Under the optimal conditions, the lipase activity and the activity yield were improved 61.5 and 93.4% comparing the results before optimization, respectively. The adequate models obtained had predicted the lipase production successfully.     

PARTIAL PURIFICATION AND CHARACTERIZATION OF THE ORGANIC SOLVENT-TOLERANT LIPASE PRODUCED BY Pseudomonas fluorescens RB02-3 ISOLATED FROM MILK

Eighty-five putative Pseudomonas isolates were obtained from various raw milk and pasteurized milk samples using Pseudomonas CFC agar. Among them, 36 isolates were identified as Pseudomonas fluorescens, and one isolate was identified as Pseudomonas putida. Lipase activity of the strains was quantitatively measured by the spectrophotometric method using p-nitrophenyl palmitate (p-NPP) as substrate. Detected lipase activity of the strains was between 10.03 U/mL and 22.16 U/mL. Pseudomonas fluorescens RB02-3 possessed the highest lipase activity. The extracellular lipase of P. fluorescens RB02-3 strain was homogeneously purified using a combination of ammonium sulfate precipitation, dialysis, and gel filtration column chromatography. This purification procedure resulted in 2.97-fold purification with 20.3% recovery. The enzyme was characterized, and exhibited maximum activity at pH 7.0 and 50°C; after it was incubated for 1 h it was activated in the presence of hexane, ethyl acetate, isopropanol, and ethanol and remained stable after the incubation was extended for 2 hr. The lipase was slightly inhibited in the presence of Zn²⁺, Co²⁺, Cu²⁺, Ni²⁺ salts, and ethylenediamine tetraacetic acid (EDTA), whereas Cd²⁺, sodium dodecyl sulfate (SDS), and Tween-80 had no effect on its activity.     

Enzymatic glycerolysis of olive oil: A reactional system with major analytical problems

Summary Major analytical problems were encountered while carrying out the lipase catalyzed glycerolysis of olive oil in n-hexane. Since direct quantification of monoglycerides could not be achieved, an alternative methodology is proposed: the estimation of monoglyceride production from a mass balance after having assayed for the unconverted triolein, as well as for the diolein and free fatty acids formed.     

Extracellular lipase of <Emphasis Type="Italic">Aspergillus niger</Emphasis> NRRL3; production,partial purification and properties

Four strains of Aspergillus niger were screened for lipase production. Each was cultivated on four different media differing in their contents of mineral components and sources of carbon and nitrogen. Aspergillus niger NRRL3 produced maximal activity (325U/ml) when grown in 3% peptone, 0.05% MgSO₄.7H₂O, 0.05% KCl, 0.2% K₂HPO₄ and 1% olive oil:glucose (0.5:0.5). A. niger NRRL3 lipase was partially purified by ammonium sulphate precipitation. The majority of lipase activity (48%) was located in fraction IV precipitated at 50–60% of saturation with a 18-fold enzyme purification. The optimal pH of the partial purified lipase preparation for the hydrolysis of emulsified olive oil was 7.2 and the optimum temperature was 60°C. At 70°C, the enzyme retained more than 90% of its activity. Enzyme activity was inhibited by Hg²⁺ and K⁺, whereas Ca²⁺ and Mn²⁺ greatly stimulated its activity. Additionally, the formed lipase was stored for one month without any loss in the activity.     

Purification of lipase from Cunninghamella verticillata and optimization of enzyme activity using response surface methodology

The fungus Cunninghamella verticillata was selected from isolates of oil-mill waste as a potent lipase producer as determined by the Rhodamine-B plate method. The lipase was purified from C. verticillata by ammonium sulphate fractionation, ion exchange chromatography and gel filtration. The purified enzyme was formed from a monomeric protein with molecular masses of 49 and 42 kDa by SDS–PAGE and gel filtration, respectively. The optimum pH at 40 °C was 7.5 and the optimum temperature at pH 7.5 was 40 °C. The enzyme was stable between a pH range of 7.5 and 9.0 at 30 °C for 24 h. The enzyme activity was strongly inhibited by AgNO₃, NiCl₂, HgCl₂, CdCl₂ and EDTA. However, the presence of Ca²⁺, Mn²⁺ and Ba²⁺ ions enhanced the activity of the enzyme. The activity of purified lipase with respect to pH, temperature and salt concentration was optimized using a Box–Behnken design experiment. A polynomial regression model used in analysing this data, showed a significant lack of fitness. Therefore, quadratic terms were incorporated in the regression model through variables. Maximum lipase activity (100%) was observed with 2 mM CaCl₂, (pH 7.5) at a temperature of 40 °C. Regression co-efficient correlation was calculated as 0.9956.     

Membrane microreactor in biocatalytic transesterification of triolein for biodiesel production

Transesterification is a principal chemical reaction that occurs in biodiesel production. We developed a novel biocatalytic membrane microreactor (BMM) for continuous transesterification by utilizing an asymmetric membrane as an enzyme-carrier for immobilization. The BMM was developed by pressure driven filtration of lipase from Pseudomonas fluorescens, which is suitable for highly efficient biocatalytic transesterification. Lipase solution was allowed to permeate through an asymmetric membrane with NMWL 300 kDa composed of polyethersulfone. The performances of BMM were studied in biodiesel synthesis via transesterification of triolein with methanol. Transesterification was carried out by passing a solution of triolein and methanol through the asymmetric membrane. The degree of triolein conversion using this microreactor was ca. 80% with a reaction time of 19 min. The BMM system displayed good stability, with no activity decay over a period of 12 day with continuous operation. Results from triolein transesterification clearly demonstrate the potential of an asymmetric membrane as an enzyme carrier material. Enzyme activity (mmol/h·g_lipase) was approximately 3 fold higher than that of native free lipase.