Variation in the surface layer proteins of Clostridium difficile

Surface layers (S-layers) form regular crystalline structures on the outermost surface of many bacteria. Clostridium difficile possesses such an S-layer consisting of two protein subunits. Treatment of whole cells of C. difficile with 5 M guanidine hydrochloride revealed two major proteins of different molecular masses characteristic of the S-layer on SDS-PAGE. In this study 25 isolates were investigated. A high degree of variability in the molecular mass of the two S-layer proteins was evident. Molecular masses ranged from 48 to 56 kDa for the heavier protein and from 37 to 45 kDa for the lighter protein. A further protein component of 70 kDa was detectable in all isolates. No cross-reaction was seen between the two major proteins from isolates that produced different S-layer patterns, and most S-layer proteins from isolates with the same or similar banding patterns did not cross-react. The S-layer proteins, when detected by a combination of Coomassie blue staining and immunoblotting, are a useful marker for phenotyping.     

Development of an optimal antigen retrieval protocol for immunohistochemistry of retinoblastoma protein (pRB) in formalin fixed,paraffin sections based on comparison of different methods

A novel protocol for antigen retrieval (AR) for immunohistochemistry (IHC) of retinoblastoma protein (pRB) in formalin fixed, paraffin embedded (FFPE) tissue sections was developed using 0.05% citraconic anhydride as the AR solution for heat treatment based on comparison of different methods. This new protocol has advantages including superior morphological preservation, greater reproducibility, and more intense staining after retrieval. Our study demonstrates the importance of comparing various AR protocols to obtain maximal IHC for standardization and for quantitative IHC.     

Development of an optimal antigen retrieval protocol for immunohistochemistry of retinoblastoma protein (pRB) in formalin fixed, paraffin sections based on comparison of different methods

A novel protocol for antigen retrieval (AR) for immunohistochemistry (IHC) of retinoblastoma protein (pRB) in formalin fixed, paraffin embedded (FFPE) tissue sections was developed using 0.05% citraconic anhydride as the AR solution for heat treatment based on comparison of different methods. This new protocol has advantages including superior morphological preservation, greater reproducibility, and more intense staining after retrieval. Our study demonstrates the importance of comparing various AR protocols to obtain maximal IHC for standardization and for quantitative IHC.     

Lactobacillus surface layer proteins: structure, function and applications

Bacterial surface (S) layers are the outermost proteinaceous cell envelope structures found on members of nearly all taxonomic groups of bacteria and Archaea. They are composed of numerous identical subunits forming a symmetric, porous, lattice-like layer that completely covers the cell surface. The subunits are held together and attached to cell wall carbohydrates by non-covalent interactions, and they spontaneously reassemble in vitro by an entropy-driven process. Due to the low amino acid sequence similarity among S-layer proteins in general, verification of the presence of an S-layer on the bacterial cell surface usually requires electron microscopy. In lactobacilli, S-layer proteins have been detected on many but not all species. Lactobacillus S-layer proteins differ from those of other bacteria in their smaller size and high predicted pI. The positive charge in Lactobacillus S-layer proteins is concentrated in the more conserved cell wall binding domain, which can be either N- or C-terminal depending on the species. The more variable domain is responsible for the self-assembly of the monomers to a periodic structure. The biological functions of Lactobacillus S-layer proteins are poorly understood, but in some species S-layer proteins mediate bacterial adherence to host cells or extracellular matrix proteins or have protective or enzymatic functions. Lactobacillus S-layer proteins show potential for use as antigen carriers in live oral vaccine design because of their adhesive and immunomodulatory properties and the general non-pathogenicity of the species.     

Reversing the effects of formalin fixation with citraconic anhydride and heat: a universal antigen retrieval method.

Formalin is a commonly used fixative for tissue preservation in pathology laboratories. A major adverse effect of this fixative is the concealing of tissue antigens by protein cross-linking. To achieve a universal antigen retrieval method for immunohistochemistry under a constant condition, we developed a new method in which the effects of formalin fixation were reversed with citraconic anhydride (a reversible protein cross-linking agent) plus heating. Formalin-fixed, paraffin-embedded tissues from various organs were examined for immunohistochemical localization of a wide variety of antigens. Deparaffinized tissue sections were placed in an electric kitchen pot containing 0.05% citraconic anhydride solution, pH 7.4, and the pot was set at "keep warm" temperature mode of 98C for 45 min. This mode allowed heating the sections at a constant temperature. The sections were then washed in buffer solution and immunostained using a labeled streptavidin-biotin method using an automated stainer. In general, formalin-fixed tissues demonstrated specific immunostainings comparable to that in fresh frozen tissues and significantly more enhanced than after conventional antigen retrieval methods. In particular, even difficult-to-detect antigens such as CD4, cyclin D1, granzyme beta, bcl-6, CD25, and lambda chain revealed distinct immunostainings. Different classes of antigens such as cellular markers and receptors, as well as cytoplasmic and nuclear proteins, consistently produced enhanced reactions. This method provides efficient antigen retrieval for successful immunostaining of a wide variety of antigens under an optimized condition. It also allows standardization of immunohistochemistry for formalin-fixed tissues in pathology laboratories, eliminating inter-laboratory discrepancies in results for accurate clinical and research studies.     

Use of regularly structured bacterial cell envelope layers as matrix for the immobilization of macromolecules

Summary Carboxyl groups present on the outer face of the hexagonally ordered S-layer lattices from Bacillus stearothermophilus PV72 and Clostridium thermohydrosulfuricum L111-69 were activated with carbodiimide. The reaction of the activated carboxyl groups with free amino groups of low molecular weight nucleophiles was controlled by labelling with polycationized ferritin, a net positively charged topographical marker for electron microscopy, which densely binds to S-layers possessing free carboxyl groups. Carbodiimide-activated carboxyl groups were also allowed to react with amino groups of ferritin (MW 440 000) and invertase (MW 270 000). Covalent attachment of ferritin was examined by electron microscopy. Using invertase, approximately 1 mg enzyme was bound per mg S-layer protein indicating a high packing density of invertase molecules on the outer face of the S-layer lattice. The immobilized invertase retained 70% of its original activity.     

The unusual cell biology of the hyperthermophilic Crenarchaeon Ignicoccus hospitalis

The Crenarchaeon Ignicoccus hospitalis is an anaerobic, obligate chemolithoautotrophic hyperthermophile, growing by reduction of elemental sulfur using molecular hydrogen as electron donor. Together with Nanoarchaeum equitans it forms a unique, archaeal biocoenosis, in which I. hospitalis serves as host for N. equitans. Both organisms can be cultivated in a stable coculture which is mandatory for N. equitans but not for I. hospitalis. This strong dependence is affirmed by the fact that N. equitans obtains its lipids and amino acids from the host. I. hospitalis cells exhibit several unique features: they can adhere to surfaces by extracellular appendages (‘fibers’) which are not used for motility; they use a novel CO₂ fixation pathway, the dicarboxylate/4-hydroxybutyrate pathway; and they exhibit a unique cell envelope for Archaea consisting of two membranes but lacking an S-layer. These membranes form two cell compartments, a tightly packed cytoplasm surrounded by a weakly staining intermembrane compartment (IMC) with a variable width from 20 to 1,000 nm. In this IMC, many round or elongated vesicles are found which may function as carriers of lipids or proteins out of the cytoplasm. Based on immuno-EM analyses and immuno-fluorescence experiments it was demonstrated recently that the A₁A_O ATP synthase, the H₂:sulfur oxidoreductase complex and the acetyl-CoA synthetase (ACS) of I. hospitalis are located in its outermost membrane. Therefore, this membrane is energized and is here renamed as “outer cellular membrane” (OCM). Among all prokaryotes possessing two membranes in their cell envelope, I. hospitalis is the first organism with an energized outermost membrane and ATP synthesis outside the cytoplasm. Since DNA and ribosomes are localized in the cytoplasm, energy conservation is separated from information processing and protein biosynthesis in I. hospitalis. This raises questions concerning the function and characterization of the two membranes, the two cell compartments and of a possible ATP transfer to N. equitans.     

Bacterial adhesion to different termite flagellates: Ultrastructural and functional evidence for distinct molecular attachment modes

Summary The attachment modes of rodlike ectobiotic bacteria to the surface of two different termite flagellates were studied.Devescovina glabra was covered by laterally attached bacteria. Treatment with chemicals that disturb hydrophobic interactions and solubilize proteins removed the ectobionts. Freeze-fracture and freeze-etching electron microscopy revealed rows of intramembrane particles that occurred exclusively along the attachment sites. The adhering Gram-negative bacteria possessed an S-layer (surface layer) composed of globular protein particles. The S-layer could be removed by protein-solubilizing chemicals, e.g., urea, as shown by ultrathin-section electron microscopy. Therefore, it seems plausible that the attachment was mediated by hydrophobic interactions between the flagellate's plasma membrane and the S-layer of the bacteria. The bacteria of the second flagellate,Joenia annectens, adhered by their tips. The attachment was extremely strong. Chemicals disturbing ionic or hydrophobic bindings or solubilizing proteins did not detach the ectobionts. Globular intramembrane protein particles were preferentially found in a ringlike array at the external fracture face of the flagellate's contact sites.Abbreviations DIC differential interference contrast - EGTA ethylene glycol-bis(-aminoethyl ether) N,N,N,N-tetraacetic acid - TEM transmission electron microscope - Tween 20 polyoxyethylenesorbitan     

New Silver-Gold Intensification Method of Diaminobenzidine for Double-Labeling Immunoelectron Microscopy

The available methods for double-labeling preembedding immunoelectron microscopy are highly limited because not only should the ultrastructure be preserved, but also the different antigens should be visualized by reaction end products that can be clearly distinguished in gray-scale images. In these procedures, one antigen is detected with 3,3′-diaminobenzidine (DAB) chromogen, resulting in a homogeneous deposit, whereas the other is labeled with either a gold-tagged immunoreagent, or DAB polymer, on the surface of which metallic silver is precipitated. The detection of the second antigen is usually impeded by the first, leading to false-negative results. The authors aimed to diminish this hindrance by a new silver intensification technique of DAB polymer, which converts the deposit from amorphous to granular. The method includes three major postdevelopmental steps: (1) treatment of nickel-enhanced DAB with sulfide, (2) silver deposition in the presence of hydroquinone under acidic conditions, and (3) precious metal replacement with gold thiocyanate. This new sulfide-silver-gold intensification of DAB (SSGI) allows a subsequent detection of other antigens using DAB. In conclusion, the new technique loads fine gold particles onto the DAB deposit at a very low background level, thereby allowing a reliable discernment between the elements stained for the two antigens at the ultrastructural level.     

An S-layer heavy chain camel antibody fusion protein for generation of a nanopatterned sensing layer to detect the prostate-specific antigen by surface plasmon resonance technology

The bacterial cell surface layer (S-layer) protein of Bacillus sphaericus CCM 2177 assembles into a square lattice structure and recognizes a distinct type of secondary cell wall polymer (SCWP) as the proper anchoring structure in the rigid cell wall layer. For generating a nanopatterned sensing layer with high density and well defined distance of the ligand on the outermost surface, an S-layer fusion protein incorporating the sequence of a variable domain of a heavy chain camel antibody directed against prostate-specific antigen (PSA) was constructed, produced, and recrystallized on gold chips precoated with thiolated SCWP. The S-layer protein moiety consisted of the N-terminal part which specifically recognized the SCWP as binding site and the self-assembly domain. The PSA-specific variable domain of the camel heavy chain antibody was selected by several rounds of panning from a phage display library of an immunized dromedary, and was produced by heterologous expression in Escherichia coli. For construction of the S-layer fusion protein, the 3'-end of the sequence encoding the C-terminally truncated form rSbpA(31)(-)(1068) was fused via a short linker to the 5'-end of the sequence encoding cAb-PSA-N7. The S-layer fusion protein had retained the ability to self-assemble into the square lattice structure. According to the selected fusion site in the SbpA sequence, the cAb-PSA-N7 moiety remained located on the outer surface of the protein lattice. After recrystallization of the S-layer fusion protein on gold chips precoated with thiolated SCWP, the monomolecular protein lattice was exploited as sensing layer in surface plasmon resonance biochips to detect PSA.     

Comparative study on the cell wall structure of protein-producing Bacillus brevis

Abstract Among eight strains of protein-producing Bacillus brevis , three morphological groups have been identified according to the structure of the cell walls.

• (I)

  Cell wall consisting of a peptidoglycanlayer
• (II)

  Two-layered cell wall consisting of a peptidoglycan-layer and an S-layer
• (III)

  Three-layered cell wall consisting of a peptidoglycan-layer and two S-layers

Group I and group II cell walls have not been described yet for protein-producing bacteria. The S-layers observed in this study all had hexagonal symmetry and lattice constants of approximately 18 nm. The immunological relation between the S-layer proteins of the newly isolated B. brevis strains and those of B. brevis 47 has been examined using antisera against both S-layer-proteins of B. brevis 47. S-layers from protein-producing B. brevis strains, which were adjacent to the peptidoglycan-layer, were similar to each other, whether they were the outermost cell wall layer (group II) or not (group III). However, no similarity was found between these layers and the outermost S-layer of B. brevis 47 (group III).     

Bacterial and archaeal S-layers as object of bionanotechnology

Many species of Bacteria and Archaea posses a regularly structured surface layers (S-layers) as outermost cell envelope component. S-layers composed of a single protein or glycoprotein species. The individual subunits of S-layers interact with each other and with the supporting bacterial envelope component through non-covalent forces. Pores in the crystalline protein network are with mean diameter of 2-6 nm, the thickness of S-layer is 5-10 nm. The isolated S-layer subunits reassemble into two-dimensional crystalline arrays in solution, on solid supports, on planar lipid films. These unique features of S-layers have led to a broad spectrum applications. This review focuses on the structural properties S-layers and S-proteins and their applications with accent to using this structures in nanobiotechnology.     

The surface layer (S-layer) glycoprotein of Geobacillus stearothermophilus NRS 2004/3a. Analysis of its glycosylation.

Geobacillus stearothermophilus NRS 2004/3a possesses an oblique surface layer (S-layer) composed of glycoprotein subunits as the outermost component of its cell wall. In addition to the elucidation of the complete S-layer glycan primary structure and the determination of the glycosylation sites, the structural gene sgsE encoding the S-layer protein was isolated by polymerase chain reaction-based techniques. The open reading frame codes for a protein of 903 amino acids, including a leader sequence of 30 amino acids. The mature S-layer protein has a calculated molecular mass of 93,684 Da and an isoelectric point of 6.1. Glycosylation of SgsE was investigated by means of chemical analyses, 600-MHz nuclear magnetic resonance spectroscopy, and matrix-assisted laser desorption ionization-time of flight mass spectrometry. Glycopeptides obtained after Pronase digestion revealed the glycan structure [-->2)-alpha-L-Rhap-(1-->3)-beta-L-Rhap-(1-->2)-alpha-L-Rhap-(1-->](n = 13-18), with a 2-O-methyl group capping the terminal trisaccharide repeating unit at the non-reducing end of the glycan chains. The glycan chains are bound via the disaccharide core -->3)-alpha-l-Rhap-(1-->3)-alpha-L-Rhap-(L--> and the linkage glycose beta-D-Galp in O-glycosidic linkages to the S-layer protein SgsE at positions threonine 620 and serine 794. This S-layer glycoprotein contains novel linkage regions and is the first one among eubacteria whose glycosylation sites have been characterized.     

The structure and binding behavior of the bacterial cell surface layer protein SbsC

Surface layers (S-layers) comprise the outermost cell envelope component of most archaea and many bacteria. Here we present the structure of the bacterial S-layer protein SbsC from Geobacillus stearothermophilus, showing a very elongated and flexible molecule, with strong and specific binding to the secondary cell wall polymer (SCWP). The crystal structure of rSbsC((31-844)) revealed a novel fold, consisting of six separate domains, which are connected by short flexible linkers. The N-terminal domain exhibits positively charged residues regularly spaced along the putative ligand binding site matching the distance of the negative charges on the extended SCWP. Upon SCWP binding, a considerable stabilization of the N-terminal domain occurs. These findings provide insight into the processes of S-layer attachment to the underlying cell wall and self-assembly, and also accommodate the observed mechanical strength, the polarity of the S-layer, and the pronounced requirement for surface flexibility inherent to cell growth and division.     

Expression and cytosolic assembly of the S-layer fusion protein mSbsC-EGFP in eukaryotic cells

Background  

Native as well as recombinant bacterial cell surface layer (S-layer) protein of Geobacillus (G.) stearothermophilus ATCC 12980 assembles to supramolecular structures with an oblique symmetry. Upon expression in E. coli, S-layer self assembly products are formed in the cytosol. We tested the expression and assembly of a fusion protein, consisting of the mature part (aa 31–1099) of the S-layer protein and EGFP (enhanced green fluorescent protein), in eukaryotic host cells, the yeast Saccharomyces cerevisiae and human HeLa cells.     

The surface location of individual residues in a bacterial S-layer protein

Bacterial surface layer (S-layer) proteins self-assemble into large two-dimensional crystalline lattices that form the outermost cell-wall component of all archaea and many eubacteria. Despite being a large class of self-assembling proteins, little is known about their molecular architecture. We investigated the S-layer protein SbsB from Geobacillus stearothermophilus PV72/p2 to identify residues located at the subunit-subunit interface and to determine the S-layer's topology. Twenty-three single cysteine mutants, which were previously mapped to the surface of the SbsB monomer, were subjected to a cross-linking screen using the photoactivatable, sulfhydryl-reactive reagent N-[4-(p-azidosalicylamido)butyl]-3′-(2′-pyridyldithio)propionamide. Gel electrophoretic analysis on the formation of cross-linked dimers indicated that 8 out of the 23 residues were located at the interface. In combination with surface accessibility data for the assembled protein, 10 residues were assigned to positions at the inner, cell-wall-facing lattice surface, while 5 residues were mapped to the outer, ambient-exposed lattice surface. In addition, the cross-linking screen identified six positions of intramolecular cross-linking within the assembled protein but not in the monomeric S-layer protein. Most likely, these intramolecular cross-links result from conformational changes upon self-assembly. The results are an important step toward the further structural elucidation of the S-layer protein via, for example, X-ray crystallography and cryo-electron microscopy. Our approach of identifying the surface location of residues is relevant to other planar supramolecular protein assemblies.     

Construction of a functional S-layer fusion protein comprising an immunoglobulin G-binding domain for development of specific adsorbents for extracorporeal blood purification

The chimeric gene encoding a C-terminally-truncated form of the S-layer protein SbpA from Bacillus sphaericus CCM 2177 and two copies of the Fc-binding Z-domain was constructed, cloned, and heterologously expressed in Escherichia coli HMS174(DE3). The Z-domain is a synthetic analogue of the B-domain of protein A, capable of binding the Fc part of immunoglobulin G (IgG). The S-layer fusion protein rSbpA(31-1068)/ZZ retained the specific properties of the S-layer protein moiety to self-assemble in suspension and to recrystallize on supports precoated with secondary cell wall polymer (SCWP), which is the natural anchoring molecule for the S-layer protein in the bacterial cell wall. Due to the construction principle of the S-layer fusion protein, the ZZ-domains remained exposed on the outermost surface of the protein lattice. The binding capacity of the native or cross-linked monolayer for human IgG was determined by surface plasmon resonance measurements. For batch adsorption experiments, 3-microm-diameter, biocompatible cellulose-based, SCWP-coated microbeads were used for recrystallization of the S-layer fusion protein. In the case of the native monolayer, the binding capacity for human IgG was 5.1 ng/mm(2), whereas after cross-linking with dimethyl pimelimidate, 4.4 ng of IgG/mm(2) was bound. This corresponded to 78 and 65% of the theoretical saturation capacity of a planar surface for IgGs aligned in the upright position, respectively. Compared to commercial particles used as immunoadsorbents to remove autoantibodies from sera of patients suffering from an autoimmune disease, the IgG binding capacity of the S-layer fusion protein-coated microbeads was at least 20 times higher. For that reason, this novel type of microbeads should find application in the microsphere-based detoxification system.     

Lactobacillusacidophilus S-layer protein-mediated inhibition of Salmonella-induced apoptosis in Caco-2 cells

Surface layer (S-layer) proteins are crystalline arrays of proteinaceous subunits present as the outermost component of the cell wall in several Lactobacillus species. The underlying mechanism for how S-layer proteins inhibit pathogen infections remains unclear. To gain insights into the mechanism of the antimicrobial activity of Lactobacillus S-layer proteins, we examined how Lactobacillus S-layer proteins impact Salmonella Typhimurium-induced apoptosis in vitro in Caco-2 human colon epithelial cells. When Caco-2 cells infected with Salmonella Typhimurium SL1344, we found that apoptosis was mediated by activation of caspase-3, but not caspase-1. When Salmonella Typhimurium SL1344 and S-layer proteins were coincubated simultaneously, Caco-2 cell apoptosis was markedly decreased and the cell damage was modified, as evaluated by flow cytometry and microscopy. Detailed analyses showed that the S-layer proteins inhibited the caspase-3 activity and activated the extracellular signal-regulated kinases 1 and 2 (ERK1/2) signaling pathway. Taken together, these findings suggest that Lactobacillus S-layer proteins protected against Salmonella-induced apoptosis through reduced caspase-3 activation. In addition, Salmonella-induced apoptotic cell damage was modified by S-layer proteins through the ERK1/2 signaling pathway. This mechanism may represent a novel approach for antagonizing Salmonella infection.     

Lactobacillus surface layers and their applications

Surface (S-) layers are crystalline arrays of proteinaceous subunits present as the outermost component of cell wall in several species of the genus Lactobacillus, as well as in many other bacteria and Archaea. Despite the high similarity of the amino acid composition of all known S-layer proteins, the overall sequence similarity is, however, surprisingly small even between the Lactobacillus S-layer proteins. In addition, the typical characteristics of Lactobacillus S-layer proteins, distinguishing them from other S-layer proteins, are small size and high-predicted pI value. Several lactobacilli possess multiple S-layer protein genes, which can be differentially or simultaneously expressed. To date, the characterized functions of Lactobacillus S-layers are involved in mediating adhesion to different host tissues. A few applications for the S-layer proteins of lactobacilli already exist, including their use as antigen delivery vehicles.