A Single solution iron-hematoxylin Stain for Intestinal Protozoa

A single solution iron-hematoxylin stain is described for staining fecal smears rapidly and simply. The stain is prepared from the following solutions: Solution A: 1% hematoxylin in 95% alcohol, prepared by diluting a stock solution of 10% hematoxylin in 95% alcohol. Solution B: Ferric ammonium sulfate (violet crystals), 4.0 g.; glacial acetic acid, 1.0 ml.; concentrated sulfuric acid (sp. gr. 1.8),0.12 ml.; distilled water, 100 ml. Mix equal parts of Solution A and Solution B; allow to stand overnight, filter and use. For maximum length of staining life, store in full, air-tight bottles. To stain fecal smears, fix in Schaudinn's, pass through iodine alcohol to 50% alcohol, stain for three minutes, wash in running tap water 5 to 15 minutes, dehydrate and mount.     

A Single solution iron-hematoxylin Stain for Intestinal Protozoa

A single solution iron-hematoxylin stain is described for staining fecal smears rapidly and simply. The stain is prepared from the following solutions: Solution A: 1% hematoxylin in 95% alcohol, prepared by diluting a stock solution of 10% hematoxylin in 95% alcohol. Solution B: Ferric ammonium sulfate (violet crystals), 4.0 g.; glacial acetic acid, 1.0 ml.; concentrated sulfuric acid (sp. gr. 1.8),0.12 ml.; distilled water, 100 ml. Mix equal parts of Solution A and Solution B; allow to stand overnight, filter and use. For maximum length of staining life, store in full, air-tight bottles. To stain fecal smears, fix in Schaudinn's, pass through iodine alcohol to 50% alcohol, stain for three minutes, wash in running tap water 5 to 15 minutes, dehydrate and mount.     

Alcoholic Hydrochloric Acid-Carmine as a Stain for Chromosomes in Squash Preparations

A regressive bulk carmine staining schedule was adapted from a formula proposed by P. Mayer. The stain is made by boiling gently 4 gm of certified carmine in 15 ml of distilled water to which 1 ml of concentrated HC1 has been added. After cooling, 95 ml of 85% alcohol is added, and the solution filtered. Fixed tissue is soaked in the stain until thoroughly penetrated; squashes are then prepared as usual, but plain 45% acetic acid is used as the temporary mounting medium instead of aceto-carmine. The advantages of this method are: intense, precise staining of chromosomes coupled with a lightly stained cytoplasm; consistency and uniformity of results; simplicity of use.     

Staining Chromosomes in Sections of Germinal Vesicles of Sarcoptid Mites by a Schiff Reagent

Chromosomes of oocytes, especially early prophase I stages, of Acaridae and Anoetidae species are difficult to stain by procedures using hematoxylin, Feulgen and aceto-orcein. Hematoxylin stains are intensely polychromatic in oocytes; the standard Feulgen procedure is negative with chromosomes during diffuse prophase stages. Satisfactory staining can be obtained with a supersensitive Schiff reagent (Tobie, W. C., Ind. Eng. Chem., Anal. Ed., 14: 405—406, 1942) made by reducing basic fuchsin with gaseous SO₂. Routinely prepared paraffin sections of mites fixed in Carnoy's 6:3:1 mixture were hydrolysed 5-8 min in 1 N HCl, washed well, and stained in this reagent: 1-2 hr for prophase oocytes, 10-20 min for condensed chromosomes. A second staining in a 0.5% aqueous solution of toluidine blue 0, adjusted to pH 5.3-5.5 with a citrate buffer, served to darken the original Feulgen stain. Counterstaining with 0.1-0.2% fast green FCF in the last fluid of the dehydrating series enhanced contrast between chromosomes and cytoplasm. This staining technic is also suitable for preparing whole mounts of mites.     

An Evaluation and Modification of Cole's Hematoxylin

Consistency in staining with an alum hematoxylin is possible by the routine use of fresh staining solutions. A modification of Cole's hematoxylin is so easily prepared that fresh staining solutions present no problem. The staining solution consists of 100 ml 1.2% aqueous KA1(SO₄)₂ .12 H₂O, 1 ml 10% alcoholic hematoxylin and 2 ml 1% iodine. Mix, place in paraffin oven overnight and stain sections 5 minutes. The three solutions can be kept as stock solutions for years.     

The Modified Steiner Stain: a New Use for an Old Stain? Staining Cytomegalovirus-infected Cells in Gastrointestinal Biopsies

The modified Steiner stain is a non-specific silver stain for identifying bacteria in formalin-fixed, paraffin-embedded tissues. The principle behind its use is that bacteria are first sensitized using uranyl nitrate solution, making them able to precipitate silver from a silver nitrate solution. It is used routinely for staining gastric biopsies to identify Helicobacter pylori. Upon staining a gastric biopsy from a patient with acquired immunodeficiency syndrome (AIDS) and cytomegalovirus gastritis, we recognized that this technique also stains the viral inclusions of cytomegalovirus-infected cells. We then proceeded to stain 43 consecutive cytomegalovirus-positive gastrointestinal biopsies from 33 immunocompromised patients based on positive cytomegalovirus immunohistochemistry (DAKO-cytomegalovirus monoclonal antibody, clones DDG9 and CCH2). We also stained eight cytomegalovirus-infected, non-gastrointestinal tissue s, including lung, adrenal gland, ovary, skin and neural tissue, to ensure that the stain was staining the cytomegalovirus-infected cells and not argyrophilic or argentaffin neuroendocrine cells of the gastrointestinal tract. In 40 of the 43 cytomegalovirus-infected gastrointestinal biopsies, we saw positive staining with the modified Steiner stain (93% sensitivity). The cytomegalovirus-infected, non-gastrointestinal tissues all stained positively with the modified Steiner stain. Because the modified Steiner stain is frequently used to identify Helicobacter pylori in gastric biopsies, we propose that it be studied further for possible use either as a screen or as a confirmatory tool, or both, for cytomegalovirus inclusions in gastrointestinal biopsies.     

The Differentiation of Live From Dead Sperms in Fowl Semen

A combined stain solution is made by dissolving 0.1 gm bromphenol blue and 0.2 gm nigrosin in 100 ml of a M/15 buffer solution of KH₂PO₄ and Na₂HPO₄ adjusted to pH 7.5. This staining solution was used to prepare stained fowl semen smears. Such smears give stable differentiation of live from dead sperms. The dead sperms are stained with a dark violet color while the live ones are not stained.     

The Demonstration of Beryllium Oxide in Paraffin Sections with Chromoxane Stains

Aqueous solutions of the arylmethane dyes Chromoxane pure blue BLD (C.I. No. 43825) and Chromoxane pure blue B (C.I. No. 43830) will stain beryllium oxide. In the presence of EDTA the staining of other metals is masked. As a specific stain for BeO, formol saline fixed paraffin sections are hydrated and stained for 1 hr with either 0.1 gm of pure blue BLD in 100 ml of pH 4.0 Na-acetate buffer or with 0.1 gm of pure blue B in 1 N NaOH adjusted to pH 9.0 with HCl. To mask interference from other metal ions, 9 gm of Na₂-EDTA is added to 100 ml of the stain solution. BeO is stained blue, organic tissue components are either unstained or pink. Results of tests against other materials show that a high degree of specificity may be expected from these dyes. A 1% aqueous solution of neutral red may be used as a counterstain.     

Differential Staining Of Tissue In The Block With Picric Acid And The Feulgen Reaction

The authors have found a modification of the Feulgen reaction to be a satisfactory stain for tissue in the block.

Pieces of fresh mammalian tissue not thicker than 5 mm. are fixed for approximately 48 hours at 25° C. in a mixture of equal parts of 5% aqueous sulfosalicylic acid and saturated aqueous picric acid. They are washed for 30 minutes in three ten-minute changes of distilled water and placed in Feulgen's staining solution diluted to one-half strength with distilled water. The staining solution is allowed to act for 24 hours (2 to 3 mm. thick blocks) up to 48 hours for 5 mm. thickness. After staining, the specimens are transferred to a mixture of sodium bisulfite, 0.5 g. and N hydrochloric acid, 5 ml. in' 100 ml. of distilled water. Two changes of IS to 30 min. each in the acid sulfite are given and these are followed by dehydration through 50%, 70% and 95% alcohol. One to two hours are allowed for each change except the last 95%, in which the stained tissue is allowed to remain overnight. The dehydration is completed in two changes of absolute alcohol with subsequent clearing in xylene and embedding in paraffin. Sections may be cut 10 μ or other thickness desired, mounted on slides, paraffin removed, and covered in the usual manner. Nuclei stain reddish violet against a lemon yellow background when the stain is typical. Orange G, 200 mg. per 100 ml. may be added to the fixing fluid if a more polychromatic effect is desired.     

A simple and rapid nuclear staining method for Rhizoctonia solani Kuhn

Abstract

We developed a modified staining technique using acridine orange to stain the nuclei of Rhizoctonia solani. Acridine orange solution was prepared in acetic acid buffer, pH 7.2. Staining for 15 min was critical for observing the nuclei. All of the isolates were found to be multinucleated. The nuclei appeared bright green with light orange background. This method is simple, rapid and reproducible.     

A Versatile Stain for Pollen Fungi, Yeast and Bacteria

A versatile stain has been developed for demonstrating pollen, fungal hyphae and spores, bacteria and yeasts. The mixture is made by compounding in the following order: ethanol, 20 ml; 1% malachite green in 95% ethanol, 2 ml; distilled water, 50 ml; glycerol, 40 ml; acid fuchsin 1% in distilled water, 10 ml; phenol, 5 g and lactic acid, 1-6 ml. A solution has also been formulated to destain overstained pollen mounts. Ideally, aborted pollen grains are stained green and nonaborted ones crimson red. Fungal hyphae and spores take a bluish purple color and host tissues green. Fungi, bacteria and yeasts are stained purple to red. The concentration of lactic acid in the stain mixture plays an important role in the differential staining of pollen. For staining fungi, bacteria and yeasts, the stain has to be acidic, but its concentration is not critical except for bacteria. In the case of pollen, staining can be done in a drop of stain on a slide or in a few drops of stain in a vial. Pollen stained in the vial can be used immediately or stored for later use. Staining is hastened by lightly flaming the slides or by storing at 55±2 C for 24 hr. Bacteria and yeasts are fixed on the slide in the usual manner and then stained. The stock solution is durable, the staining mixture is very stable and the color of the mounted specimens does not fade on prolonged storage. Slides are semipermanent and it is not necessary to ring the coverslip provided 1-2 drops of stain are added if air bubbles appear below the coverslip. The use of differentially stained pollen mounts in image analyzers for automatic counting and recording of aborted and nonaborted pollen is also discussed.     

Cytochemical Staining of Sections from Plastic-Embedded Flagellates

Dinoflagellate chromosomes in sections of plastic-embedded cells were stained without removing the plastic. Azur B and Feulgen procedures were used to localise DNA. Azur B was used with Araldite or methacrylate sections by staining in 0.2% stain in 0.05 M citrate buffer at pH 4 for 1 hr at 50 C followed by rinsing in tertiary butyl alcohol to differentiate the chromosomes. Feulgen stain was used with Araldite sections by hydrolyzing in 1 N HCl at 60 C for 10 min, rinsing in water, staining for 24 hr, washing well, drying and covering. Fast green was used with methacrylate sections to stain proteins by flooding the slide with a 0.1% solution of stain in 0.06 M phosphate buffer at pH 8, allowing the stain to dry out at 40-50 C, washing well, drying and covering. Controls were carried out on material fixed in formalin and treated with nucleases or proteolytic enzymes prior to embedding, and staining.     

A Hematoxylin and Eosin-Like Stain for Glycol Methacrylate Embedded Tissue Sections

A staining procedure is described for use with glycol methacrylate embedded tissue sections which does not stain the plastic embedment or remove the sections from the glass slides. The basic dye is celestine blue B. It is prepared by treating 1 g of the dye with 0.5 ml concentrated sulfuric acid. It is then dissolved with the following solution. Add 14 ml glycerine to 100 ml 2.5 percent ferric ammonium sulfate and warm the solution to 50 C. Finally adjust the pH to 0.8 to 0.9 The acid staining solution consists of 0.075 percent ponceau de xylidine and 0.025 percent acid fuchsin in 10 percent acetic acid. Slides containing the dried plastic sections are immersed in the celestine blue solution for five minutes and in the ponceau-fuchsin solution for ten minutes with an intervening water rinse. After a final wash, the sections are air dried and coverslipped. This staining procedure colors the tissues nearly the same as hematoxylin and eosin procedures.     

Staining with chromoxane cyanine R.

Since Pearse in 1957 introduced chromoxane cyanine R as a dual nuclear and cytoplasmic stain there have appeared numerous procedures for use of this dye. These have differed widely, sharing in common mainly the implication that each is best. A defendable procedure has been developed on an experimental basis and is reported here. Four stock solutions are needed: (1) a 0.2% solution of chromoxane cyanine R in 0.5% aqueous H2SO4 (v/v); boil this solution for 5 min, (2) 10% FeCl3 in 3% HCl, (3) 1% aqueous HN4OH, and (4) 1% HCl in 70% ethanol. The staining solution: 40 ml of dye solution, 2 ml of FeCl3 solution, 8 ml H2O. Dewax and hydrate sections and stain for 10 min. If a myelin sheath stain is desired differentiate for 1 min in solution (3). For a nuclear stain differentiate for 1 min in solution (4). The nuclear stain when counterstained with eosin closely resembles the routine hematoxylin and eosin. Histochemical tests show that the functional group for myelin staining contains nitrogen, and probably hydrogen bonding is involved. The nuclear stain involves a different functional group and possibly neither electrostatic nor hydrogen bonding.     

The Gallocyanin-Chrome Alum Stain; Influence of Methods of Preparation on Its Activity and Separation of Active Staining Compound

A dye, which is probably a cationic chelate, has been separated from a gallocyanin-chrome alum staining solution and prepared in the dry form. This dye is apparently the major staining compound. To prepare the chelate or dye, dissolve 150 mg of gallocyanin and 15 gm of chrome alum in 100 ml of distilled water and boil for 10-20 min, cool, filter, wash the precipitate with sufficient distilled water to restore the volume of the filtrate to 100 ml, then add concentrated NH₄OH until the pH is raised to 8-8.5. Filter, with suction, through a medium porosity fritted glass funnel. Wash with 100-200 ml of anhydrous ethyl ether and air dry the precipitate. This ratio of chrome alum to gallocyanin and the 10-20 min boiling time are optimal for preparation of the staining solution, which may be used either for staining or for separation of the chelate in its dry form. From the dried chelate, the staining solution is prepared as a 3% solution in1 N H₂SO₄ and a staining time of 16-24 hr is required. No differentiation is needed; the stain is self-limiting.     

Cytochemical Staining of Sections from Plastic-Embedded Flagellates

Dinoflagellate chromosomes in sections of plastic-embedded cells were stained without removing the plastic. Azur B and Feulgen procedures were used to localise DNA. Azur B was used with Araldite or methacrylate sections by staining in 0.2% stain in 0.05 M citrate buffer at pH 4 for 1 hr at 50 C followed by rinsing in tertiary butyl alcohol to differentiate the chromosomes. Feulgen stain was used with Araldite sections by hydrolyzing in 1 N HCl at 60 C for 10 min, rinsing in water, staining for 24 hr, washing well, drying and covering. Fast green was used with methacrylate sections to stain proteins by flooding the slide with a 0.1% solution of stain in 0.06 M phosphate buffer at pH 8, allowing the stain to dry out at 40-50 C, washing well, drying and covering. Controls were carried out on material fixed in formalin and treated with nucleases or proteolytic enzymes prior to embedding, and staining.     

Staining with Chromoxane Cyanine R

Since Pearse in 1957 introduced chromoxane cyanine R as a dual nuclear and cytoplasmic stain there have appeared numerous procedures for use of this dye. These have differed widely, sharing in common mainly the implication that each is best. A defendable procedure has been developed on an experimental basis and is reported here. Four stock solutions are needs. (1) a 0.2% solution of chromoxane cyanine R in 0.5% aqueous H₂SO₄ (v/v); boil this solution for 5 min, (2) 10% FeCl₃ in 3% HCI, (3) 1% aqueous NH₄OH, and (4) 1% HCI in 70% ethanol. The staining solution: 40 ml of dye solution, 2 ml of FeCl₃ solution, 8 ml H₂O. Dewax and hydrate sections and stain for 10 min. If a myelin sheath stain is desired differentiate for 1 min in solution (3). For a nuclear stain differentiate for 1 min in solution (4). The nuclear stain when counterstained with eosin closely resembles the routine hematoxylin and win. Histochemical tee show that the functional pup for myelin staining contains nitrogen, and probably hydrogen bonding is involved. The nuclear stain involves a different functional group and possibly neither electrostatic nor hydrogen bonding.     

Oxazine Dyes. I. Celestine Blue B with Iron as a Nuclear Stain

It is suggested that celestine blue B can stain as a colloidal dispersion, the nuclear specificity of which is controlled by the pH. The staining solution is prepared by adding 0.5 ml of concentrated H₂SO₄ to 1 gm of celestine blue B and dissolving the resultant granular mass in 100 ml of 2.5% ferric alum containing 14 ml of glycerol. Sections of amphibian, avian, and mammalian tissue placed for 1 min in this solution and then rinsed in water show as sharp nuclear staining as that usually produced by hematoxylin. A wide variety of fixatives is permissible. Overstaining is not possible within reasonable limits of exposure and no differentiation nor bluing is required. Both the staining solution and stained slides are stable.     

Staining Germinating Pollen and Pollen Tubes

Germinating pollen on stigmas and pollen tubes in styles of Antirrhinum, Brassica, Oenothera, Raphanus, Rosa, solatium and Tagetes spp. were prepared for examination as follows: The styles were fixed in ethyl alcohol-acetic acid 3:1 for 1 hr, and hydrolyzed at 60°C for 5 to 60 min (depending on the species) in 45% acetic acid. The stigma with its attached strand(s) of stigmatoid tissue was then dissected out under a stereoscopic microscope, placed in a few drops of a staining solution made by dissolving 150 mg of safranin O and 20 mg of aniline blue in 25 ml of hot 45% acetic acid. After 5-15 min in this stain, the tissue was placed in a fresh drop of stain on a microscope slide and gently squashed under a cover glass. Because of a gradual precipitation of the aniline blue component, the stain had to be filtered regularly before use. However, a staining solution could be kept at room temperature for several weeks.     

Differential in Toto Staining of Bone, Cartilage and Soft Tissues

The following method for staining bone and cartilage allows study of the gross cleared specimen and does not injure the tissues for subsequent microscopic study: Fix in 10% neutral formalin; bleach thoroughly in 3% H₂O₂ in sunlight. Wash in distilled water. Stain bone 24 hours in 0.01 g. of Biebrich scarlet in 100 ml. of distilled water. Destain in 95% alcohol until soft tissues and cartilage are colorless. Stain cartilage 24 hours in a pH2 buffer solution of 2.1g. of citric acid per 100 ml. of water with 0.001 g. of methylene blue. Destain in pH2 buffer solution until soft tissues are pale. Dehydrate in two changes of 95% alcohol in preparation for clearing. (This completes the destaining and may remove too much stain from the cartilage if destaining in the pH2 solution has been carried too far.) Place in Groat's clearing fluid and cover loosely so that the alcohol may evaporate, or remove the alcohol in vacuo. Groat's Mixture No. 19 is usually satisfactory.

For a combined stain, first stain bone, as above, and then apply the cartilage stain.

Seal jars with an ordinary liquid wood glue such as LePage's.