Safranin and Anilin Blue with Delafield's Hematoxylin for Staining Cell Walls in Shoot Apexes

The following technic is suggested for staining cell walls in shoot apexes: After the usual preliminary steps through 50% ethyl alcohol, stain in 1 % safranin 0 for 24 hours. Rinse in tap water and place in 2% aqueous tannic acid for 2 minutes. After rinsing in tap water, stain for 2 minutes in 1 part Delafield's hematoxylin to 2 parts distilled water and rinse in tap water. Remove excess hematoxylin with acidified water (1 drop cone. HC1 in 200 ml. water), then place slides in 0.5% lithium carbonate for 5 minutes. Dehydrate through an ethyl alcohol series, then transfer from absolute alcohol to a saturated solution of anilin blue in “methyl cellosolve” for 5-10 minutes. Wash in absolute alcohol, rinse in a solution of 25% methyl salicylate, 33% xylene, 42% absolute ethyl alcohol and clear for 10 minutes in a solution of 2 parts methyl salicylate, 1 part xylene, 1 part absolute ethyl alcohol. Transfer through two changes of xylene and mount in “clarite” or suitable alternate. The resulting preparations will have clearly defined, dark-staining cell walls and will photograph well when “Super Panchro-Press, Type B” film (Eastman Kodak Co.) is used in conjunction with suitable Wratten filters.     

Enzyme, Lectin and Immunohistochemistry of Plastic Embedded Undecalcified Bone and other Hard Tissues for Light Microscopic Investigations

Enzymes and tissue antigens were localized on plastic embedded undecalcified bones and teeth using Technovit 7200 VLC (Kulzer, Germany). This resin is hard enough for cutting and grinding procedures on rotating plates with diamond layers. The pores between the diamond grains are not obstructed with this resin. The procedure described here permits localization of antigens in the soft tissues adjacent to, or in the biological hard tissues themselves and in dental implants (ceramic or metallic) on the light microscopic level. The undecalcified bone is fixed and embedded in plastic and cut at 100-150 μm. The slices are ground automatically by a grinding machine to a thickness of 5-10 μm. After application of the substrates for alkaline and acid phosphatases and the required dyes, the distribution of these enzymes can be demonstrated. Tissue antigens also can be detected with slightly modified standard techniques of immunohistochemistry and lectin histochemistry using the peroxidase technique or fluorescence microscopy.     

Differential Staining for Cellulosic and Modified Plant Cell Walls

A simple method to enhance the staining of cell wall components for fluorescence microscopy is described. In stems of Nicotiana tabacum and needles of Pinus eldarica lignin, the cuticle and unsaturated lipids are indicated by a purple-red fluorescence while pectocellulosic components fluorescc pale blue.     

Combined Lectin Binding and PAS/Alcian Blue Staining in Glycol Methacrylate Sections

Evaluation of cryofixation and paraffin and glycol methacrylate embedding showed that lectin binding was essentially independent of the embedding medium. Fluorescence intensity increased in the following order: glycol methacrylate, paraffin and cryostat sections, The optical resolution increased in the reverse order. Semi-thin glycol methacrylate sections provided satisfactory fluorescence intensities and the best resolution of all embedding techniques applied. Furthermore the lectin treated sections can be stained further using routine histological or specific histochemical methods. The potassium hy-droxide/alcian blue/periodic acid-phenylhydra-zine-Schiff method was used successfully to demonstrate sulfated and nonsulfated sialomucins. Lectins combined with mucin histochemistry allowed visualization of specific sugar residues in the same glycol methacrylate plastic section.