A Rapid Method for Microbial Sample Preparation for the Scanning Electron Microscope

A synthetic aromatic polymer has been used for preparing replicas of different microorganisms. This method of preparing highly concentrated (9.6 k) microbiological samples for scanning electron microscopy was compared with a standard method. The micrographs of the replicated samples are satisfactory. This method is rapid, cost effective and produces good results, especially in the case of spore-forming mycelial microorganisms.     

微生物流式分选的单细胞样品制备及存活率提高的方法优化

【背景】以流式细胞技术为代表的高通量筛选技术能够高效筛选具有目标性状的微生物工程菌株。在流式分选中微生物的粘连会造成分析数据不准确,分选纯度降低,因此快速简便的单细胞样品制备是流式检测的关键。优势菌大多是通过筛选偶联荧光蛋白的随机突变库获得,阳性率低,杂质和死细胞的自发荧光较强,容易混入分选门内造成存活率降低,亟须提高分选存活率的方法。【目的】建立一种简便的微生物流式分选的单细胞样品制备方法,并通过碘化丙啶(propidium iodide, PI)染色提高分选样品存活率。【方法】分别在大肠杆菌、枯草芽孢杆菌、谷氨酸棒状杆菌和酵母菌4种底盘细胞中探索超声波、消化酶、表面活性剂及超声-表面活性剂联合作用4种方式对单细胞制备效率的影响。提高微生物流式分选存活率,用常压室温等离子诱变(atmospheric and room temperature plasma, ARTP)技术处理含有绿色荧光蛋白(green fluorescent protein, GFP)的酿酒酵母HZ848 (简称HZ848-GFP),形成不同强度GFP文库后,按照GFP强度分选全细胞和PI染色阴性细胞的前0.5%,统计单细胞存活率。【结果】酵母细胞分散条件为：0.01% Tween-80联合超声1 min,单细胞率达到88%以上,PI染色细胞破损率＜1.4%。谷氨酸棒状杆菌单细胞分散条件为：0.01% Tween-80联合超声5 min,单细胞率达到97%以上,PI染色细胞破损率＜1%。分选存活率结果表明,未用PI染色的酿酒酵母分选后单细胞存活率是4.3%,用PI染色去除死细胞后再分选单细胞存活率是18.3%,后者是前者的4.3倍,且具有显著性差异。【结论】本研究为微生物流式分选建立了一套简单快捷的单细胞样品制备方法,证实了PI染色法能够显著提高分选样品存活率。     

Establishing oil-degrading biofilms on gravel particles and glass plates

A method is described for “artificially” establishing biofilms rich in hydrocarbon degrading bacteria on gravel particles and glass plates. The microbial consortia in the biofilms included in additions, filamentous cyanobacteria, picoplankton and diatoms. Phototrophic microorganisms were pioneer colonizers. Hydrocarbon utilizing bacteria, namely Acinetobacter calcoaceticus and nocardioforms were in part attached to filaments of cyanobacteria. In batch cultures, it was shown that those artificial biofilms had an attenuation effect on crude-oil in contaminated sea water samples. The potential use of these biofilms for preparing trickling filters (gravel particles), and in bioreactors (glass plates) for attenuating hydrocarbons in oily liquid wastes before their disposal in the open environment is suggested and discussed.     

Isolation and characterization of soil strains producing glutaryl-7-aminocephalosporanic acid acylase

A search was undertaken to screen microorganisms that produce an enzyme capable of deacylating glutaryl-7-aminocephalosporanic acid to 7-aminocephalosporanic acid in soil samples. The screening was carried out by preparing enrichment cultures containing glutaryl-7ACA and cephalosporin C as selective carbon sources. A non-β-lactam model compound, glutaryl-p-nitroanilide, was synthesized as a substrate suitable for the rapid screening of microorganisms isolated from the enrichment cultures. Two isolates exhibiting acylase activity, designated BY7.4 and BY8.1, were identified as strains ofPseudomonas species.Pseudomonas BY8.1 showed higher acylase activity toward Gl-7ACA thanPseudomonas BY7.4. Environmental conditions for the optimal acylase activity ofPseudomonas BY8.1 were shown to be pH 9 and 30°C.     

daime, a novel image analysis program for microbial ecology and biofilm research

Combinations of microscopy and molecular techniques to detect, identify and characterize microorganisms in environmental and medical samples are widely used in microbial ecology and biofilm research. The scope of these methods, which include fluorescence in situ hybridization (FISH) with rRNA-targeted probes, is extended by digital image analysis routines that extract from micrographs important quantitative data. Here we introduce daime (digital image analysis in microbial ecology), a new computer program integrating 2-D and 3-D image analysis and visualization functionality, which has previously not been available in a single open-source software package. For example, daime automatically finds 2-D and 3-D objects in images and confocal image stacks, and offers special functions for quantifying microbial populations and evaluating new FISH probes. A novel feature is the quantification of spatial localization patterns of microorganisms in complex samples like biofilms. In combination with '3D-FISH', which preserves the 3-D structure of samples, this stereological technique was applied in a proof of principle experiment on activated sludge and provided quantitative evidence that functionally linked ammonia and nitrite oxidizers cluster together in their habitat. This image analysis method complements recent molecular techniques for analysing structure-function relationships in microbial communities and will help to characterize symbiotic interactions among microorganisms.     

Community Structure Comparison Using FAME Analysis of Desert Varnish and Soil,Mojave Desert,California

While a number of studies have shown that a close association exists between microorganisms and varnished rocks, there is little hard evidence to support the existence of either specific desert varnish communities, or any role these microbes might play in the genesis of the varnish layers. To this end, we analyzed fatty acid methyl esters (FAMEs) of samples collected from the Mojave desert of southern California to compare the microbial community structure of desert varnish with the adjacent desert soil. These analyses indicated prokaryotic and fungal communities in both desert varnish and soil samples. FAMEs specific to gram-positive bacteria were found more often, and in greater abundance in varnish samples than in adjacent soils. This may represent a higher preservation potential of gram-positive bacteria fatty acids in varnish, a source area of varnish microorganisms dominated by gram-positive bacteria, or a varnish community dominated by gram-positive microorganisms. Heterogeneity in fatty acids was documented between varnished rocks and soils from different localities, as well as between samples collected from the same locality. This heterogeneity suggests that there are significant differences in the community structure of the microbial fauna found in varnish samples compared to the adjacent soil, and that desert varnish in the Mojave desert is not characterized by a unique and ubiquitous microbial community. These results suggest that the varnish is not a homogeneous and unique environment for biota, and provide no support for the hypothesis that the varnish layers are biogenic in origin.     

Using ultrafiltration to concentrate and detect Bacillus anthracis, Bacillus atrophaeus subspecies globigii, and Cryptosporidium parvum in 100-liter water samples

A strategy that uses ultrafiltration (UF) to concentrate microorganisms from water samples has been developed and tested. This strategy was tested using 100-liter water samples with volume reduction achieved through ultrafiltration and recycling the microorganisms of interest through a retentate vessel, rather than returning them to the sample container, where they might pose an incremental hazard to sample takers or the environment. Three protocols based on this strategy were tested. The first protocol entailed sample volume reduction and collection of the final reduced sample. The second and third protocols both incorporated pretreatment of the filter and fluid lines with a solution to prevent microorganisms from adhering. In the second protocol, the filter was back flushed with a surfactant solution to recover microorganisms. The third protocol used recirculation of a surfactant solution to recover microorganisms. Tests were undertaken using 100-liter water samples spiked with approximately 100 or 1000 microorganisms (1 or 10 per liter). Test microorganisms included Bacillus anthracis Sterne strain, Bacillus atrophaeus subsp. globigii, and Cryptosporidium parvum. The first protocol had significantly lower recovery than the other two. Back flushing resulted in higher recovery than forward flushing, but the difference was not statistically significant.     

Fate of Cryptosporidium oocysts, Giardia cysts, and microbial indicators during wastewater treatment and anaerobic sludge digestion.

The extent of reduction in selected microorganisms was tested during both aerobic wastewater treatment and anaerobic digestion of sludge at the wastewater treatment plant in Ottawa to compare the removal of two encysted pathogenic protozoa with that of microbial indicators. Samples collected included the raw wastewater, the primary effluent, the treated wastewater, the mixed sludge, the decanted liquor, and the cake. All of the raw sewage samples were positive for Cryptosporidium oocysts and Giardia cysts, as well as for the other microorganisms tested. During aerobic wastewater treatment (excluding the anaerobic sludge digestion), Cryptosporidium and Giardia were reduced by 2.96 log10 and 1.40 log10, respectively. Clostridium perfringens spores, Clostridium perfringens total counts, somatic coliphages, and heterotrophic bacteria were reduced by approximately 0.89 log10, 0.96 log10, 1.58 log10, and 2.02 log10, respectively. All of the other microorganisms were reduced by at least 3.53 log10. Sludge samples from the plant were found to contain variable densities of microorganisms. Variability in microbial concentrations was sometimes great between samples, stressing the importance of collecting a large number of samples over a long period of time. In all cases, the bacterial concentrations in the cake (dewatered biosolids) samples were high even if reductions in numbers were observed with some bacteria. During anaerobic sludge digestion, no statistically significant reduction was observed for Clostridium perfringens, Enterococcus sp., Cryptosporidium oocysts, and Giardia cysts. A 1-2 log10 reduction was observed with fecal coliforms and heterotrophic bacteria. However, the method utilized to detect the protozoan parasites does not differentiate between viable and nonviable organisms. On the other hand, total coliforms and somatic coliphages were reduced by 0.35 log10 and 0.09 log10, respectively. These results demonstrate the relative persistence of the protozoa in sewage sludge during wastewater treatment.     

“Density equilibrium” method for the quantitative and rapid in situ determination of lipid,hydrocarbon, or biopolymer content in microorganisms

The work provides a simple method, based on a direct density equilibrium measurement, for the rapid in situ estimation of total lipid, hydrocarbon or biopolymer content in a variety of prokaryotic and eukaryotic samples. The method can be readily applied to live microalgae and photosynthetic bacteria, single‐celled or colonial microorganisms, as well as cellular fractions and isolated subcellular compartments or components. In this approach, the absolute lipid, hydrocarbon, or biopolymer content of the cells can be readily calculated. This method is especially useful for tracking the oil or polymer content of strains of microalgae and other microorganisms, whose lipid, hydrocarbon or biopolymer content may change with cultivation conditions and/or time, as the case would be in microorganism lipid‐induction industrial processes. The method is also useful for the direct in situ measurement of storage polymer accumulation in live cells, such as starch in microalgae and polyhydroxybutyrate, or other polyhydroxyalkanoates, in photosynthetic and non‐photosynthetic bacteria. Biotechnol. Bioeng. 2009;102: 1406–1415. © 2008 Wiley Periodicals, Inc.     

Evaluation of VNTR typing for the identification of Mycobacterium ulcerans in environmental samples from Victoria, Australia

Reliable molecular detection of Mycobacterium ulcerans in environmental samples is essential to study the ecology and transmission of this important human pathogen. Variable number tandem repeat (VNTR) typing is a valuable method for distinguishing M. ulcerans isolates from different geographic regions and for distinguishing M. ulcerans from other members of the Mycobacterium marinum/M. ulcerans complex, but its application to environmental samples has not yet been evaluated systematically. This study compares the sensitivity and specificity of PCR detection of 13 VNTR loci to determine the best loci for the analysis of environmental samples. This study demonstrates that VNTR typing using selected loci can be a useful addition to established molecular methods for detecting M. ulcerans in the environment and highlights some of the issues encountered when using molecular methods to detect microorganisms in environmental samples. When applied to environmental samples collected from an endemic region in Victoria, Australia, VNTR typing confirmed that the strain of M. ulcerans being detected was indistinguishable from the strain causing disease in humans in that region.     

基于流式细胞仪高通量分选的深海微生物单细胞培养

【目的】建立适用于海洋微生物的流式细胞分选与高通量单细胞培养的方法,通过该方法从印度洋深海样品中分离微生物纯培养菌株。【方法】利用流式细胞仪单细胞分选功能,以前向角(FSC)和侧向角(SSC)散射光信号代替荧光信号作为分选逻辑,对深海水体和沉积物样品中微生物进行单细胞高通量分选和培养。【结果】确定了流式细胞分选的区域和条件,发现所建立方法适于分离海洋水体微生物,而不是沉积物微生物。从印度洋深海水体样品中获得61个潜在新菌株,分属于6个新属种,占分离菌株总数的26.29%,其16S rRNA基因序列与已培养的模式菌株相似性为89.79%–95.37%。【结论】本研究所建立的方法有助于提高发现海洋微生物新物种的效率,获得更多新的海洋微生物资源。     

A rapid,sensitive, simple plate assay for detection of microbial alginate lyase activity

Screening of microorganisms capable of producing alginate lyase enzyme is commonly carried out by investigating their abilities to grow on alginate-containing solid media plates and occurrence of a clearance zone after flooding the plates with agents such as 10% (w/v) cetyl pyridinium chloride (CPC), which can form complexes with alginate. Although the CPC method is good, advantageous, and routinely used, the agar in the media interferes with the action of CPC, which makes judgment about clearance zones very difficult. In addition, this method takes a minimum of 30 min to obtain the zone of hydrolysis after flooding and the hydrolyzed area is not sharply discernible. An improved plate assay is reported herein for the detection of extracellular alginate lyase production by microorganisms. In this method, alginate-containing agar plates are flooded with Gram's iodine instead of CPC. Gram's iodine forms a bluish black complex with alginate but not with hydrolyzed alginate, giving sharp, distinct zones around the alginate lyase producing microbial colonies within 2–3 min. Gram's iodine method was found to be more effective than the CPC method in terms of visualization and measurement of zone size. The alginate-lyase-activity area indicated using the Gram's iodine method was found to be larger than that indicated by the CPC method. Both methods (CPC and Gram's iodine) showed the largest alginate lyase activity area for Saccharophagus degradans (ATCC 43961) followed by Microbulbifer mangrovi (KCTC 23483), Bacillus cereus (KF801505) and Paracoccus sp. LL1 (KP288668) grown on minimal sea salt medium. The rate of growth and metabolite production in alginate-containing minimal sea salt liquid medium, followed trends similar to that of the zone activity areas for the four bacteria under study. These results suggested that the assay developed in this study of Gram's iodine could be useful to predict the potential of microorganisms to produce alginate lyase. The method also worked well for screening and identification of alginate lyase producers and non-producers from environmental samples on common laboratory media. They did this by clearly showing the presence or absence of clearance zones around the microbial colonies grown. This new method is rapid, efficient, and could easily be performed for screening a large number of microbial cultures. This is the first report on the use of Gram's iodine for the detection of alginate lyase production by microorganisms using plate assay.     

The Most Probable Limit of Detection (MPL) for rapid microbiological methods

Classical microbiological methods have nowadays unacceptably long cycle times. Rapid methods, available on the market for decades, are already applied within the clinical and food industry, but the implementation in pharmaceutical industry is hampered by for instance stringent regulations on validation and comparability with classical methods. Equivalence studies become less relevant when rapid methods are able to detect only one single microorganism. Directly testing this capability is currently impossible due to problems associated with preparing a spiked sample with low microbial counts. To be able to precisely estimate the limit of detection of rapid absence/presence tests, the method of the most probable limit is presented. It is based on three important elements; a relatively precise quantity of microorganisms, a non-serial dilution experiment and a statistical approach. For a set of microorganisms, a limit of detection of one was demonstrated using two different rapid methods.     

Analysis of the differences in microbial community structures between suspended and sessile microorganisms in rivers based on quinone profile

In this study, a quinone profiling method was applied to clarify the differences in community structure between suspended and sessile microorganisms in rivers. The compositions of microbial quinone of 6 sites for 4 rivers were analyzed. Ubiquinone (UQ)-8, UQ-10, menaquinone (MK)-7, and plastoquinone (PQ)-9 were observed in all samples of suspended and sessile microorganisms for the sites investigated. The dominant quinone species in suspended microorganisms was ubiquinone, and that in sessile microorganism was photosynthetic quinones (namely PQ-9 and vitamin K1). This indicated that aerobic bacteria were abundant in the suspended microorganisms, and photosynthetic microorganisms such as micro-algae and cyanobacteria dominated in the sessile microorganisms. The quinone concentration in the river waters tested, which reflects the concentration of suspended microorganisms, ranged from 0.045 to 1.813 nmol/L. The microbial diversities of suspended and sessile microorganisms calculated based on the composition of all quinones were in the range from 3.4 to 7.5, which was lower than those for activated sludge and soils. Moreover, the diversity of heterotrophic bacteria for sessile microorganisms in the rivers was higher than that for the suspended microorganisms.     

Fountain Flow cytometry, a new technique for the rapid detection and enumeration of microorganisms in aqueous samples.

BACKGROUND: Pathogenic microorganisms are known to cause widespread waterborne disease worldwide. There is an urgent need to develop a technique for the real-time detection of pathogens in environmental samples at low concentrations, <10 microorganisms/ml, in large sample volumes, > or =100 ml. METHODS: A novel method, Fountain Flowtrade mark cytometry, for the rapid and sensitive detection of individual microorganisms in aqueous samples is presented. Each sample is first incubated with a fluorescent label and then passed as a stream in front of a laser, which excites the label. The fluorescence is detected with a CCD imager as the sample flows toward the imager along its optical axis. The feasibility of Fountain Flow cytometry (FFC) is demonstrated by the detection of Escherichia coli labeled with ChemChrome CV6 and SYBR Gold in buffer and natural river water. RESULTS: Detections of labeled E. coli were made in aqueous suspensions with an efficiency of 96% +/- 14% down to a concentration approximately 200 bacteria/ml. CONCLUSIONS: The feasibility of FFC is demonstrated by the detection of E. coli in buffer and natural river water. FFC should apply to the detection of a wide range of pathogenic microorganisms including amoebae.     

Improved Method for Determination of Respiring Individual Microorganisms in Natural Waters

A method is reported that combines the microscopic determinations of specific, individual, respiring microorganisms by the detection of electron transport system activity and the total number of organisms of an estuarine population by epifluorescence microscopy. An active cellular electron transport system specifically reduces 2-(p-iodophenyl)-3-(p-nitrophenyl)-5-phenyl tetrazolium chloride (INT) to INT-formazan, which is recognized as opaque intracellular deposits in microorganisms stained with acridine orange. In a comparison of previously described sample preparation techniques, a loss of >70% of the counts of INT-reducing microorganisms was shown to be due to the dissolution of INT-formazan deposits by immersion oil (used in microscopy). In addition, significantly fewer fluorescing microorganisms and INT-formazan deposits, both ≤0.2 μm in size, were found for sample preparations that included a Nuclepore filter. Visual clarity was enhanced, and significantly greater direct counts and counts of INT-reducing microorganisms were recognized by transferring microorganisms from a filter to a gelatin film on a cover glass, followed by coating the sample with additional gelatin to produce a transparent matrix. With this method, the number of INT-reducing microorganisms determined for a Chesapeake Bay water sample was 2-to 10-fold greater than the number of respiring organisms reported previously for marine or freshwater samples. INT-reducing microorganisms constituted 61% of the total direct counts determined for a Chesapeake Bay water sample. This is the highest percentage of metabolically active microorganisms of any aquatic population reported using a method which determines both total counts and specific activity.     

Novel method for monitoring genetically engineered microorganisms in the environment.

A method has been devised for directly detecting and monitoring genetically engineered microorganisms (GEMs) by using in vitro amplification of the target DNAs by a polymerase chain reaction and then hybridizing the DNAs with a specific oligonucleotide or DNA probe. A cloned 0.3-kilobase napier grass (Pennisetum purpureum) genomic DNA that did not hybridize to DNAs isolated from various microorganisms, soil sediments, and aquatic environments was inserted into a derivative of a 2,4-dichlorophenoxyacetic acid-degradative plasmid, pRC10, and transferred into Escherichia coli. This genetically altered microorganism, seeded into filter-sterilized lake and sewage water samples (10(4)/ml), was detected by a plate count method in decreasing numbers for 6 and 10 days of sample incubation, respectively. The new method detected the amplified unique marker (0.3-kilobase DNA) of the GEM even after 10 to 14 days of incubation. This method is highly sensitive (it requires only picogram amounts of DNA) and has an advantage over the plate count technique, which can detect only culturable microorganisms. The method may be useful for monitoring GEMs in complex environments, where discrimination between GEMs and indigenous microorganisms is either difficult or requires time-consuming tests.     

Screening and characterization of microorganisms with glutaryl-7 ADCA acylase activity

A screening of microorganisms producing glutaryl-7 ADCA acylase, an enzyme able to hydrolyse glutaric acid selectively from glutaryl-3-deacetoxy-7-aminocephalosporanic acid (glutaryl-7 ADCA), has been carried out in soil samples. Five microorganisms expressing acylase activity were isolated and classified as Bacillus cereus, Achromobacter xylosooxidans, Bacillus sp., Pseudomonas sp. and Pseudomonas paucimobilis. The screening was carried out by preparing enrichment cultures containing glutaryl-7-ADCA or cephalosporin C as the selective carbon source. Four model compounds (adipoyl-, glutamyl- and glutaryl-p-nitroanilide and glutarylcoumarin), mimicking the glutaryl-7 ADCA -lactam moiety, were synthesized as substrates suitable for the rapid screening of the microorganisms (2500) isolated from the enrichment cultures. A total of 300 strains were active on the model substrates and only 5 displayed acylase activity on glutaryl-7 ADCA. The fermentation parameters, such as pH and inducer concentration, for the optimal acylase expression and acylase specificity towards the model substrates were different for each strain.