Three New Lipases from Actinomycetes and Their Use in Organic Reactions

Three novel lipase-producing microorganisms have been isolated from 526 actinomycete strains by employing screening techniques on solid media. Time-course and scale-up of enzyme production were analyzed. The lipases, produced by microorganisms belonging to the Streptomyces genus, were tested in several reactions in organic medium using unnatural substrates. The lyophilized crude lipases are stable at least for 1 month at 4°C (100% recovered activity). The lipase activity per milliliter of cell culture broth was higher than described in the literature for other lipases from actinomycetes. The three selected lipases displayed better activity than commercial lipase from Candida rugosa in the resolution of chiral secondary alcohols. The lipase from S. halstedii also displayed very good activity in the synthesis of carbamates.     

Enzymatic resolution of alkyn-3-ols in non-aqueous medium

Summary Resolution of alkyn-3-ols has been achieved using a lipase from Candida rugosa to esterify the alcohols with trifluoroethyl butyrate in hexane to give the (S)-alcohols and the (R)-esters. Subsequent reacylation of the product alcohols and alcoholysis of the esters with 1-butanol furnished the (S)-alcohols with good (86–91% ees) and the (R)-butyrate with moderate enantiomeric purities (62–64% ees).     

Lipase‐Catalyzed Kinetic Resolution of Novel Antifungal N‐Substituted Benzimidazole Derivatives

A series of new N‐substituted benzimidazole derivatives was synthesized and their antifungal activity against Candida albicans was evaluated. The chemical step included synthesis of appropriate ketones containing benzimidazole ring, reduction of ketones to the racemic alcohols, and acetylation of alcohols to the esters. All benzimidazole derivatives were obtained with satisfactory yields and in relatively short times. All synthesized compounds exhibit significant antifungal activity against Candida albicans 900028 ATCC (% cell inhibition at 0.25 μg concentration > 98%). Additionally, racemic mixtures of alcohols were separated by lipase‐catalyzed kinetic resolution. In the enzymatic step a transesterification reaction was applied and the influence of a lipase type and solvent on the enantioselectivity of the reaction was studied. The most selective enzymes were Novozyme SP 435 and lipase Amano AK from Pseudomonas fluorescens (E > 100). Chirality 28:347–354, 2016. © 2016 Wiley Periodicals, Inc.     

Lipases are soluble and active in glycerol carbonate as a novel biosolvent

Glycerol carbonate was synthesized as biosolvent for the development of soluble enzymatic system. The effects of various reaction parameters on activity and stability of lipases were investigated using the transesterification of ethyl butyrate with n-butanol as a model reaction. Enzymatic activity in glycerol carbonate was compared with that in water and in conventional organic solvents with different ionizing and dissociating abilities. The pK_a value of trichloroacetic acid and transesterification activities of Candida antarctica lipase B and Candida rugosa lipase in glycerol carbonate are similar to those in water, indicating that ionizing and dissociating powers are capable of satisfactorily predicting the biocompatibility of organic solvents for soluble enzymatic systems.     

Enhancement of activity and selectivity of Candida rugosa lipase and Candida antarctica lipase A by bioimprinting and/or immobilization for application in the selective ethanolysis of fish oil

Candida rugosa lipase (CRL) and Candida antarctica lipase A (CALA) with improved activity and selectivity were prepared for use in organic solvent media. CRL bioimprinted with fatty acids exhibited eightfold enhanced transesterification activity in hexane. Combination of bioimprinting and coating with lecithin or with immobilization did not improve the activity further. CALA was immobilized with and without bioimprinting, none of which improved the activity. All modified lipases were tested for selective ethanolysis of fish oil to concentrate omega-3 polyunsaturated fatty acids (PUFA). None of the preparations, except the immobilized ones catalysed ethanolysis. Immobilized CRL-catalyzed ethanolysis giving 27% (v/v) ethyl esters (EE) in 48 h, of which 43 mol% was oleic acid but no PUFA was detected in the EE fraction. Fatty acid selectivity of CALA was significantly improved by immobilization combined with bioimprinting, resulting in 5.5-fold lower omega-3 PUFA in EE.     

Immobilization of lipase by salts and the transesterification activity in hexane

Lipases from six different sources were immobilized on Celite and five types of salt. The transesterification activities in hexane for lipases immobilized on EDTA-Na₂ increased by 463% for the lipase from Candida rugosa (CRL), 2700% for the lipase from Candida sp. (CSL) and 1215% for the lipase from Pseudomonas sp. (PSL), compared to the salt-free enzyme. With 0.5% sucrose for CRL or 1% sorbitol for PSL as the lyoprotectant during lyophilization process, transesterification activity increased by 100% and 13%, respectively, compared to the immobilized enzyme on EDTA-Na₂ without lyoprotectant.     

Comparison of differently modified Pseudomonascepacia lipases in enantioselective preparation of a chiral alcohol for agrochemical use

Three methods for enzyme modification/immobilization were compared to enhance the catalytic performance of a commercially available lipase, Lipase PS from Pseudomonascepacia, in highly enantioselective transesterification of an agrochemically useful sec-alcohol, (R,?S)-HMPC [=(R,?S)-4-hydroxy-3-methyl-2-(2′-propenyl)-2-cyclopenten-1-one], with vinyl acetate as both acyl donor and reaction medium. The stearic acid-coated lipase showed the highest catalytic activity, with a specific activity improved by 54 times over the native lipase. The microcrystal salt-supported lipase and celite-adsorbed lipase also displayed much better performance as compared with the native lipase. All the three modified lipase preparations showed a similar thermal stability to that of the native enzyme. The enantioselectivity (E-value) was also quite satisfactory in all the cases (E>100 at 30°C), though a trend of slight decline was also observed with the temperature increase in the range of 25–60°C. The optimum aqueous pH, from which the modified lipases were prepared, was 6.0–7.0. A low water activity (a_w) of ca. 0.1 was favorable for all the three modified lipases. The stearic acid-coated lipase displayed prominent advantages in catalyzing the transesterification reaction at a very high (R,?S)-HMPC concentration up to 1.0?M.     

Candida rugosa lipase encapsulated with magnetic sporopollenin: design and enantioselective hydrolysis of racemic arylpropanoic acid esters

Abstract

The aim of this study was to prepare the encapsulation of Candida rugosa lipase (CRL) with magnetic sporopollenin. The sporopollenin was covalent immobilized onto magnetic nanoparticles (Fe₃O₄), grafted amino (APTES), or epoxy groups (EPPTMS). CRL was sol-gel encapsulated in the presence of magnetic sporopollenin/Fe₃O₄ nanoparticles. The influence of activation agents ([3-(2,3-epoxypropoxy) propyl] trimethoxysilane (EPPTMS), (3-Aminopropyl)triethoxysilane (APTES) and pH and thermal stabilities of the biocatalyst were assessed. Experimental data showed the improved catalytic activity at different pH and temperature values. At 60?°C, free lipase lost its initial activity within 80?min of time, although the encapsulated lipases retained their initial activities of about 65% by APTES and 60% by EPPTMS after 120?min of heat treatment at 60?°C. The catalytic properties of the encapsulated lipases were utilized to hydrolysis of racemic aromatic carboxylic acid methyl esters (Naproxen and 2-phenoxypropionic acid). The results show that the sporopollenin-based encapsulated lipase (Fe-A-Spo-E) has greater enantioselectivity and conversion in comparison with the encapsulated lipase without supports (lipase-enc).     

Enzymatic resolution of racemic ibuprofen by surfactant-coated lipases in organic media

Summary Surfactant-coated lipases have been utilized as a biocatalyst for the resolution of racemic ibuprofen. S-(+)-ibuprofen was selectively transferred to the ester form by Mucor javanicus or Candida rugosa lipase. The enzymatic activity of upases in organic media was remarkably enhanced by coating with a nonionic surfactant. The reaction rates of the coated lipases were increased around 100-fold that of the powder lipases.     

Kinetic resolution of 2-chloro-3,3,3-trifluoropropanoic acid esters catalyzed by lipase from Candida rugosa

Abstract

By screening around 30 commercially available lipases and esterases, two enzymes, C. rugosa lipase and P. fluorescens esterase, were found to posess catalytic activity and enantioselectivity (E?10) for the hydrolysis of 2-chloro-3,3,3-trifluoropropanoic acid (CTFPA) methyl and ethyl ester. Both enzymes were tentatively assigned to be (S)-selective based on the assumption that they have the same stereopreference as in the hydrolysis of methyl 2-chloropropanoate, which is a non-fluorinated analogue of CTFPA. The enzymes were applied in the kinetic resolution of CTFPA ethyl ester and 95% ee of the remaining ester could be achieved at 60% conversion. The crosslinked enzyme aggregate (CLEA) of C. rugosa lipase was found to catalyze enantioselective transesterification (E?40) of CTFPA methyl ester with ethanol. By conducting the transesterification in a 10-mL packed-bed reactor containing CLEA, it was possible to convert racemic CTFPA methyl ester into the mixture of (S)-methyl and (R)-ethyl esters with 82% and 90% ee, respectively, at 4.0 g/L^-1/h^-1 space-time yield, which decreased to 1.0 g/L^-1/h^-1 after four repetitive batches.     

Use of lipases in the resolution of racemic ibuprofen

Summary Resolution of (R,S)-ibuprofen enantiomers by esterification in different organic solvents was studied using Candida cylindracea lipase. This enzyme preparation had high enantiospecificity for S(+)-ibuprofen in the esterification reaction of a racemic ibuprofen with primary alcohols. The esterification yields of secondary alcohols were much lower than those of primary alcohols. Esterification with tertiary alcohols was not observed. The synthesis of esters was profoundly affected by the amount of water in the reaction mixture. C. cylindracea lipase was active only in very hydrophobic solvents. The esterification activity of the lipase was reduced significantly by addition of water. The R- and S-enantiomers of ibuprofen were determined without derivatization by HPLC using a chiral column.     

Burkholderia cepacia lipase: A versatile catalyst in synthesis reactions

The lipase from Burkholderia cepacia, formerly known as Pseudomonas cepacia lipase, is a commercial enzyme in both soluble and immobilized forms widely recognized for its thermal resistance and tolerance to a large number of solvents and short‐chain alcohols. The main applications of this lipase are in transesterification reactions and in the synthesis of drugs (because of the properties mentioned above). This review intends to show the features of this enzyme and some of the most relevant aspects of its use in different synthesis reactions. Also, different immobilization techniques together with the effect of various compounds on lipase activity are presented. This lipase shows important advantages over other lipases, especially in reaction media including solvents or reactions involving short‐chain alcohols.     

Purification and characterization of two isoforms from Candida rugosa lipase B

Two isoforms of Candida rugosalipase B (LB1 and LB2) were purified by anionic exchange chromatography. The lipases had the same N-terminal sequence, carbohydrate content and pH and thermal stability but different pIs and significant differences in their activities against different p-nitrophenol esters and triacylglycerides.     

High-yield synthesis of wax esters catalysed by modified <Emphasis Type="Italic">Candida rugosa</Emphasis> lipase

Candida rugosa lipase (CRL) was applied in a non-solvent esterification reaction to yield twelve wax esters. All products were obtained in nearly 100% yield for 10 h at 50°C when immobilized PEG₂₀₀₀-activated C. rugosa lipase was added to the reaction mixture. The surfactant had also a beneficial effect on the stability of the biocatalytic preparation with 83% of its activity conserved after the seventh run of repeated batch reactions.     

Chemical modification of lipases with various hydrophobic groups improves their enantioselectivity in hydrolytic reactions

Semi-purified lipases from Candida rugosa, Pseudomonas cepacia and Alcaligenes sp. were chemically modified with a wide range of hydrophobic groups such as benzyloxycarbonyl, p-nitrobenzyloxycarbonyl, p-methoxybenzyloxycarbonyl, t-butoxycarbonyl, lauroyl and acetyl moieties. The Candida rugosa lipase MY modified with the benzyloxycarbonyl group (modification ratio = 84%) brought about a 15-fold increase in enantioselectivity (E value) towards the hydrolysis of racemic butyl 2-(4-ethylphenoxy)propionate in an aqueous buffer solution, although the enzymatic activity was decreased. The origin of the enantioselectivity enhancement by chemical modification of the lipase is attributed to a significant deceleration in the initial reaction rate for the incorrectly binding enantiomer.     

Terpene ester synthesis by lipase-catalyzed transesterification

Summary Five lipases were screened for their ability to synthesize terpene esters by transesterification. The nature of terpene alcohol and enzyme, as well as the chain length of the acyl donor used affected the product yields. Lipase AY from Candida rugosa gave the best overall yield (96.2%). Geraniol and tributyrin were also found to be the best reactants.     

Immobilization of lipase within carbon nanotube–silica composites for non-aqueous reaction systems

The immobilization of lipases within sol–gel derived silica, using multi-walled carbon nanotubes (MWNTs) as additives in order to protect the inactivation of lipase during sol–gel process and to enhance the stability of lipase, was investigated. Three sol–gel immobilized lipases (Candida rugosa, Candida antarctica type B, Thermomyces lanuginosus) with 0.33% (w/w) MWNT showed much higher activities than lipase immobilized without MWNT. The influence of MWNT content and MWNT shortened by acid treatment in the sol–gel process on the activity and stability of immobilized C. rugosa lipase was also studied. In hydrolysis reaction, immobilized lipase containing 1.1% pristine MWNT showed 7 times higher activity than lipase immobilized without MWNT. The lipase coimmobilized with 2.7% shortened MWNT showed 10 times higher activity in esterification reaction, compared with lipase immobilized without MWNT. The lipase coimmobilized with 2.7% shortened MWNT retained 96% of initial activity after 5 times reuse, while the lipase immobilized without MWNT was fully inactivated under the same condition.     

Improved stability of the lipase from Candida rugosa in different purification degrees by chemical modification

Summary Semipurified lipase of Candida rugosa and pure isoforms (lipase A and lipase B) have been chemically modified using two methodologies based on polyethyleneglycol (PEG). The activation of PEG with p-NO₂-phenylchloroformate gives better biocatalysts than those obtained with cyanuric chloride-PEG in the enzymatic activity of the lipase. The chemical modification increases the stability of pure lipases in isooctane at 50 °C.     

Structure of hydrolases: lipases and cellulases

Knowledge of lipase mechanisms has increased significantly during the past year. The structural characterization of the opening mechanism of the active site of lipases, as first described for Rhizomucor miehei lipase, has now been extended to the pancreatic lipase-colipase system, and to the Geotrichum candidum/Candida rugosa lipases. In the latter two lipase families, lid opening is far more complicated than for R. miehei lipase. Resolution of the structure of cutinase, an esterase with lipase activity, and determination of the sequence of guinea pig pancreatic lipase showed that these lipases have no lid. The fact that both enzymes are not activated at the interface shows the importance of the lid in the latter phenomenon. On the basis of sequence analysis, cellulases have been divided into different families. Structural determinations of some members of a few of these families confirm that they have different folds. The active sites of these cellulases always seem to contain acidic catalytic groups. The relative spatial position of these groups and their accessibility varies considerably among the cellulases for which structural determinations have been made.     

Biosynthesis of glycerol carbonate from glycerol by lipase in dimethyl carbonate as the solvent

Glycerol carbonate was synthesized from renewable glycerol and dimethyl carbonate using lipase in solvent-free reaction system in which excess dimethyl carbonate played as the reaction medium. A variety of lipases have been tested for their abilities to catalyze transesterification reaction, and Candida antartica lipase B and Novozyme 435 exhibited higher catalytic activities. The silica-coated glycerol with a 1:1 ratio was supplied to prevent two-phase formation between hydrophobic dimethyl carbonate and hydrophilic glycerol. Glycerol carbonate was successfully synthesized with more than 90% conversion from dimethyl carbonate and glycerol with a molar ratio of 10 using Novozyme 435-catalyzed transesterification at 70 °C. The Novozyme 435 [5% (w/w) and 20% (w/w)] and silica gel were more than four times recycled with good stability in a repeated batch operation for the solvent-free synthesis of glycerol carbonate.