Fluorescence analysis of tryptophan-containing variants of the LamB signal sequence upon insertion into a lipid bilayer

To investigate the interaction of the LamB signal sequence with lipid bilayers, we have synthesized three tryptophan-containing analogues of the wild-type signal peptide. The tryptophan residues were used as intrinsic fluorescent probes of the N-terminal (position 5), central (position 18), and C-terminal (position 24) regions of the 25-residue peptide. The tryptophan substitutions did not significantly alter the physical properties of the wild-type signal peptide. In the presence of lipid vesicles which mimic the composition of the Escherichia coli inner membrane, the peptides adopt alpha-helical structure, and the tryptophan fluorescence emission maximum is shifted to shorter wavelength, indicating that the peptides insert into the acyl chain region of the lipid bilayer. Fluorescence quenching by soluble, aqueous-phase (I-), and membrane-resident (nitroxide-labeled lipids) quenchers was used to locate the tryptophans in each peptide within the bilayer. The C-terminus was interfacial while the central region of the signal sequence was deeply buried within the acyl chain region of the bilayer. The tryptophan at position 5 was buried but less deeply than the tryptophan at position 18. This topology is consistent with either a looped or a transmembrane orientation of signal peptide. However, either structure must accommodate the high helical content of the peptides in vesicles. These results indicate that the LamB signal sequence spontaneously inserts into the acyl chain region of lipid membranes in the absence of any of the proteins involved in protein secretion.     

Membrane insertion and lateral mobility of synthetic amphiphilic signal peptides in lipid model membranes

Amphiphilic signal sequences with the potential to form alpha-helices with a polar, charged face and an apolar face are common in proteins which are imported into mitochondria, in the PTS permeases of bacteria, and in bacterial rhodopsins. Synthetic peptides of such sequences partition into the surface region of lipid membranes where they can adopt different secondary structures. A finely controlled balance of electrostatic and hydrophobic interactions determines the 'affinity' of amphiphilic signal peptides for lipid membranes, as well as the structure, orientation and depth of penetration of these peptides in lipid bilayer membranes. The ability of an individual peptide to associate with lipid bilayer membranes in several different modes is, most likely, a general feature of amphiphilic signal peptides and is reflected in several common physical properties of their amino acid sequences.     

Orientation of LamB signal peptides in bilayers: influence of lipid probes on peptide binding and interpretation of fluorescence quenching data.

The orientation in lipid bilayers of the signal sequence of the bacterial protein LamB was studied using binding, circular dichroism, and fluorescence quenching experiments. Measurements were made of binding modifications caused by the incorporation of lipid probes (brominated or nitroxide-labeled phospholipids) used in the parallax fluorescence quenching method of determining peptide penetration depth [Abrams, F. S., and London, E. (1992) Biochemistry 31, 5312-5322]. The signal peptide bound to a similar extent to neutral bilayers composed of either egg phosphatidylcholine (EPC) or phosphatidylcholines brominated at various positions on their acyl chains. The fluorescence of a tryptophan in either the 18 or 24 position of the peptide was quenched more by bromines in the 6 and 7 than in the 9 and 10 positions on the lipid hydrocarbon chain. Parallax calculations showed that tryptophan-18 was located only 4 A from the hydrocarbon-water interface, consistent with the peptide adopting a "hammock" configuration in the bilayer, with both termini exposed to the aqueous phase and the central alpha-helix located near the hydrocarbon-water interface. In contrast, the incorporation of 10% nitroxide-labeled lipids into EPC bilayers modified peptide binding in a manner dependent on the position of the nitroxide on the hydrocarbon chain; 7-Doxyl PC reduced the percent peptide bound by about one-half, whereas 12-Doxyl PC had little effect on binding. These binding differences modified tryptophan quenching by these probes, making parallax analysis problematical. In the presence of the positively charged LamB peptide, the incorporation of negatively charged phospholipids into EPC bilayers increased the level of peptide binding and modified tryptophan quenching by nitroxide probes. These results suggest that the nitroxide probe could be partially excluded from negatively charged lipid domains where the peptide preferentially bound. Quite different binding and quenching results were obtained with a negatively charged peptide analogue, showing that the charge on both the peptide and bilayer affects peptide-nitroxide probe interactions.     

Inhibition of PhoE translocation across Escherichia coli inner-membrane vesicles by synthetic signal peptides suggests an important role of acidic phospholipids in protein translocation

To obtain insight into the mechanism of precursor protein translocation across membranes, the effect of synthetic signal peptides and other relevant (poly)peptides on in vitro PhoE translocation was studied. The PhoE signal peptide, associated with inner membrane vesicles, caused a concentration-dependent inhibition of PhoE translocation, as a result of a specific interaction with the membrane. Using a PhoE signal peptide analog and PhoE signal peptide fragments, it was demonstrated that the hydrophobic part of the peptide caused the inhibitory effect, while the basic amino terminus is most likely important for an optimal interaction with the membrane. A quantitative analysis of our data and the known preferential interaction of synthetic signal peptides with acidic phospholipids in model membranes strongly suggest the involvement of negatively charged phospholipids in the inhibitory interaction of the synthetic PhoE signal peptide with the inner membrane. The important role of acidic phospholipids in protein translocation was further confirmed by the observation that other (poly)peptides, known to have both a high affinity for acidic lipids and hydrophobic interactions with model membranes, also caused strong inhibition of PhoE translocation. The implication of these results with respect to the role of signal peptides in protein translocation is indicated.     

Modulation of melittin-induced lysis by surface charge density of membranes.

Phosphorus NMR spectroscopy was used to characterize the importance of electrostatic interactions in the lytic activity of melittin, a cationic peptide. The micellization induced by melittin has been characterized for several lipid mixtures composed of saturated phosphatidylcholine (PC) and a limited amount of charged lipid. For these systems, the thermal polymorphism is similar to the one observed for pure PC: small comicelles are stable in the gel phase and extended bilayers are formed in the liquid crystalline phase. Vesicle surface charge density influences strongly the micellization. Our results show that the presence of negatively charged lipids (phospholipid or unprotonated fatty acid) reduces the proportion of lysed vesicles. Conversely, the presence of positively charged lipids leads to a promotion of the lytic activity of the peptide. The modulation of the lytic effect is proposed to originate from the electrostatic interactions between the peptide and the bilayer surface. Attractive interactions anchor the peptide at the surface and, as a consequence, inhibit its lytic activity. Conversely, repulsive interactions favor the redistribution of melittin into the bilayer, causing enhanced lysis. A quantitative analysis of the interaction between melittin and negatively charged bilayers suggests that electroneutrality is reached at the surface, before micellization. The surface charge density of the lipid layer appears to be a determining factor for the lipid/peptide stoichiometry of the comicelles; a decrease in the lipid/peptide stoichiometry in the presence of negatively charged lipids appears to be a general consequence of the higher affinity of melittin for these membranes.     

Interaction of the lantibiotic nisin with mixed lipid bilayers: a 31P and 2H NMR study

Nisin is a positively charged antibacterial peptide which binds to the negatively charged membranes of Gram-positive bacteria. The initial interaction of the peptide with model membranes of neutral (phosphatidylcholine) and negatively charged (phosphatidylcholine/phosphatidylglycerol) model lipid membranes was studied using nonperturbing solid state magic angle spinning (MAS) (31)P NMR and (2)H wide-line NMR. In the presence of nisin, the coexistence of two bilayer lipid environments was observed both in charged and in neutral membranes. One lipid environment was found to be associated with lipid directly interacting with nisin and one with noninteracting lipid. Solid state (31)P MAS NMR results show that the acidic membrane lipid component partitions preferentially into the nisin-associated environment. Deuterium NMR ((2)H NMR) of the selectively headgroup-labeled acidic lipid provides further evidence of a strong interaction between the charged lipid component and the peptide. The segregation of acidic lipid into the nisin-bound environment was quantified from (2)H NMR measurements of selectively headgroup-deuterated neutral lipid. It is suggested that the observed lipid partitioning in the presence of nisin is driven, at least initially, by electrostatic interactions. (2)H NMR measurements from chain-perdeuterated neutral lipids indicate that nisin perturbs the hydrophobic region of both charged and neutral bilayers.     

Investigations on the insertion of the mitochondrial precursor protein apocytochrome c into model membranes

Different aspects of the interaction of apocytochrome c and model membranes composed of negatively charged lipids, were studied in order to get insight into the nature of this interaction. The effect of the protein on the lipid packing properties are revealed by DSC, ESR and monolayer techniques. These experiments clearly demonstrate that upon electrostatic interaction with the negatively charged phospholipids, apocytochrome c is able to penetrate into the hydrophobic region of the model membrane. In the case of 1,2-dimyristoyl-sn-glycero-3-phosphoglycerol, this results in a perturbation of 160 lipid molecules per apocytochrome c molecule. Most likely, apocytochrome c disrupts the formation of the gel phase and restricts the lipid chain motion above the gel to liquid-crystalline phase transition. Tryptophan fluorescence measurements confirm that at least a part of the protein penetrates into the bilayer, and suggest that after this penetration, the tryptophan (residue no. 59) is located in the glycerol backbone region of the phospholipids. Although the secondary structure of apocytochrome c is predicted to contain about 35% of alpha-helical structure, the CD pattern of an aqueous solution of the protein is featureless. However, negatively charged lipids are able to express this alpha-helical potency in the apocytochrome c, which might be important for the insertion of the protein into lipid membranes.     

Interaction of mutant alkaline phosphatase precursors with membrane phospholipids in vivo and in vitro.

Positively charged amino acid residues in the N-terminal domain of the signal peptides of secreted proteins are thought to interact with negatively charged anionic phospholipids during the initiation of secretion. To test this hypothesis, substitutions of the uncharged Ala or the negatively charged Glu residue for the positively charged Lys-20 of the N-terminus of the signal peptide of Escherichia coli alkaline phosphatase were introduced using a modified method of oligonucleotide-directed mutagenesis. We found that Lys-20 is involved in the interaction of the signal peptide with anionic phospholipids in vivo and effects the efficiency of insertion of the signal peptide of isolated precursor into model phospholipid membranes in vitro. We also show that the efficiency of signal peptide insertion into the lipid bilayer depends on the fluidity of the bilayer.     

Interaction of cationic antimicrobial peptides with model membranes

A series of natural and synthetic cationic antimicrobial peptides from various structural classes, including alpha-helical, beta-sheet, extended, and cyclic, were examined for their ability to interact with model membranes, assessing penetration of phospholipid monolayers and induction of lipid flip-flop, membrane leakiness, and peptide translocation across the bilayer of large unilamellar liposomes, at a range of peptide/lipid ratios. All peptides were able to penetrate into monolayers made with negatively charged phospholipids, but only two interacted weakly with neutral lipids. Peptide-mediated lipid flip-flop generally occurred at peptide concentrations that were 3- to 5-fold lower than those causing leakage of calcein across the membrane, regardless of peptide structure. With the exception of two alpha-helical peptides V681(n) and V25(p,) the extent of peptide-induced calcein release from large unilamellar liposomes was generally low at peptide/lipid molar ratios below 1:50. Peptide translocation across bilayers was found to be higher for the beta-sheet peptide polyphemusin, intermediate for alpha-helical peptides, and low for extended peptides. Overall, whereas all studied cationic antimicrobial peptides interacted with membranes, they were quite heterogeneous in their impact on these membranes.     

Modulation of membrane surface curvature by peptide-lipid interactions

Recent reports on the interaction of cardiotoxin and melittin with phospholipid model membranes are reviewed and analyzed. These types of peptide toxins are able to modulate lipid surface curvature and polymorphism in a highly lipid-specific way. It is demonstrated that the remarkable variety of effects of melittin on the organization of different membrane phospholipids can be understood in a relatively simple model, based on the shape-structure concept of lipid polymorphism and taking into account the position of the peptide molecule with respect to the lipids. Based on the strong preference of the peptides for negatively charged lipids and the structural consequences thereof, and on preliminary studies of signal peptide-lipid interaction, a role of inverted or concave lipid structures in the process of protein translocation across membranes is suggested.     

SecA insertion into phospholipids is stimulated by negatively charged lipids and inhibited by ATP: a monolayer study.

SecA-lipid interactions are believed to be important for the translocation of precursor proteins across the inner membrane of Escherichia coli [Lill, R., Dowhan, W., & Wickner, W. (1990) Cell 60, 271-280]. SecA insertion into the phospholipid bilayer could a role in this process. We investigated this possibility by studying the interactions between SecA and different phospholipids using the monolayer technique. It was established that SecA is surface-active and can insert into lipid monolayers. This insertion was greatly enhanced by the negatively charged lipids DOPG and Escherichia coli cardiolipin. Insertion of SecA into these negatively charged lipids could be detected up to initial surface pressures of 34 mN/m for DOPG and 36 mN/m for Escherichia coli cardiolipin, implying a possible role for negatively charged lipids in the insertion of SecA in biological membranes. High salt concentrations did not inhibit the SecA insertion into DOPG monolayers, suggesting not only an electrostatic but also a hydrophobic interaction of SecA with the lipid monolayer. ATP decreased both the insertion (factor 2) and binding (factor 3) of SecA to DOPG monolayers. ADP and phosphate gave a decrease in the SecA insertion to the same extent as ATP, but the binding of SecA was only slightly reduced. AMP-PNP and ATP-gamma-S did not have large effects on the insertion or on the binding of SecA to DOPG monolayers. The physiological significance of these results in protein translocation is discussed.     

HIV-1 Gag specificity for PIP2 is regulated by macromolecular electric properties of both protein and membrane local environments

HIV-1 assembly occurs at the plasma membrane, with the Gag polyprotein playing a crucial role. Gag association with the membrane is directed by the matrix domain (MA), which is myristoylated and has a highly basic region that interacts with anionic lipids. Several pieces of evidence suggest that the presence of phosphatidylinositol-(4,5)-bisphosphate (PIP₂) highly influences this binding. Furthermore, MA also interacts with nucleic acids, which is proposed to be important for the specificity of GAG for PIP₂-containing membranes. It is hypothesized that RNA has a chaperone function by interacting with the MA domain, preventing Gag from associating with unspecific lipid interfaces. Here, we study the interaction of MA with monolayer and bilayer membrane systems, focusing on the specificity for PIP₂ and on the possible effects of a Gag N-terminal peptide on impairing the binding for either RNA or membrane. We found that RNA decreases the kinetics of the protein association with lipid monolayers but has no effect on the selectivity for PIP₂. Interestingly, for bilayer systems, this selectivity increases in presence of both the peptide and RNA, even for highly negatively charged compositions, where MA alone does not discriminate between membranes with or without PIP₂. Therefore, we propose that the specificity of MA for PIP₂-containing membranes might be related to the electrostatic properties of both membrane and protein local environments, rather than a simple difference in molecular affinities. This scenario provides a new understanding of the regulation mechanism, with a macromolecular view, rather than considering molecular interactions within a ligand-receptor model.     

Tryptophan fluorescence study on the interaction of the signal peptide of the Escherichia coli outer membrane protein PhoE with model membranes

The interaction of the signal peptide of the Escherichia coli outer membrane protein PhoE with different phospholipid vesicles was investigated by fluorescence techniques, using a synthetic mutant signal peptide in which valine at position -8 in the hydrophobic sequence was replaced by tryptophan. First it was established that this mutation in the signal sequence of prePhoE does not affect in vivo and in vitro translocation efficiency and that the biophysical properties of the synthetic mutant signal peptide are similar to those of the wild-type signal peptide. Next, fluorescence experiments were performed which showed an increase in quantum yield and a blue shift of the emission wavelength maximum upon interaction of the signal peptide with lipid vesicles, indicating that the tryptophan moiety enters a more hydrophobic environment. These changes in intrinsic fluorescence were found to be more pronounced in the presence of phosphatidylglycerol (PG) or cardiolipin (CL) than with phosphatidylcholine (PC). In addition, quenching experiments demonstrated a shielding of the tryptophan fluorescence from quenching by the aqueous quenchers iodide and acrylamide upon interaction of the signal peptide with lipid vesicles, a shielding in the case of acrylamide that was more pronounced in the presence of negatively charged lipids. Finally it was found that acyl chain brominated lipids incorporated into phospholipid bilayers were able to quench the tryptophan fluorescence of the signal peptide, with the quenching efficiency in CL vesicles being much higher than in PC vesicles. The results clearly demonstrate that the PhoE signal peptide interacts strongly with different lipid vesicles.(ABSTRACT TRUNCATED AT 250 WORDS)     

Structural Study of the Interaction Between the Mitochondrial Presequence of Cytochrome c Oxidase Subunit IV and Model Membranes

The structural effect of the presequence of cytochrome oxidase subunit IV (p25) on multilamellar liposomes with different lipid compositions has been investigated using X-ray diffraction and electron microscopy. The presequence causes the disordering of the liposomes containing negatively charged lipids, without destabilizing the bilayer structure or destroying the multilamellar nature of the liposomes. In the systems containing only zwitterionic lipids, a small increase in the d-spacing (lamellar stacking spacing) is observed without any disorder effect suggesting a weaker interaction of the peptide and lipid. Circular Dichroism measurements of the peptide, in the presence and absence of the different lipid systems studied, show that the secondary structure of the peptide is modulated by the lipid environment. Considerable amounts of -helix in the presequence is only observed in the systems containing negatively charged lipids. These are the same systems for which the disordering effect is observed with X-ray diffraction. It is proposed that p25 disorders the bilayer stacking by corrugating the membranes. The results are discussed in terms of the relevance of the specific lipid properties (e.g., electric charge and ability to form inverted phases) in determining how the peptide interacts with the lipid and affects its structural organization. It is suggested that the lipid properties relevant for the disordering effect induced by the peptide are the same as those involved in the formation of contact sites between mitochondrial membranes during the import of nuclear coded proteins.     

Membrane association and selectivity of the antimicrobial peptide NK‐2: a molecular dynamics simulation study

In an effort to better understand the initial mechanism of selectivity and membrane association of the synthetic antimicrobial peptide NK‐2, we have applied molecular dynamics simulation techniques to elucidate the interaction of the peptide with the membrane interfaces. A homogeneous dipalmitoylphosphatidylglycerol (DPPG) and a homogeneous dipalmitoylphosphatidylethanolamine (DPPE) bilayers were taken as model systems for the cytoplasmic bacterial and human erythrocyte membranes, respectively. The results of our simulations on DPPG and DPPE model membranes in the gel phase show that the binding of the peptide, which is considerably stronger for the negatively charged DPPG lipid bilayer than for the zwitterionic DPPE, is mostly governed by electrostatic interactions between negatively charged residues in the membrane and positively charged residues in the peptide. In addition, a characteristic distribution of positively charged residues along the helix facilitates a peptide orientation parallel to the membrane interface. Once the peptides reside close to the membrane surface of DPPG with the more hydrophobic side chains embedded into the membrane interface, the peptide initially disturbs the respective bilayer integrity by a decrease of the order parameter of lipid acyl chain close to the head group region, and by a slightly decrease in bilayer thickness. We found that the peptide retains a high content of helical structure on the zwitterionic membrane‐water interface, while the loss of α‐helicity is observed within a peptide adsorbed onto negatively charged lipid membranes. Copyright © 2009 European Peptide Society and John Wiley & Sons, Ltd.     

Transmembrane Lipid Migration in Planar Asymmetric Bilayer Membranes

Planar asymmetric bilayer membranes, formed by apposing a monolayer of the neutral lipid glyceroldioleate (GDO) with one of the negatively charged lipid oleyl acid phosphate (OAP), were used to measure the rate of transmembrane OAP migration. The assay for this lipid flip-flop was the interaction of Ca²⁺ ions with negatively charged lipids which causes membranes to break: when Ca²⁺ is added to the compartment limited initially by the neutral lipid, flip-flop of the charged lipid eventually results in membrane breakdown. At 22 ± 2°C, in the absence of an externally applied electric field, an upper limit to the half time of OAP flip-flop was measured as 18.7 h, with a tentative lower limit of 14.4 h.     

Interaction of the antimicrobial peptide pheromone Plantaricin A with model membranes: implications for a novel mechanism of action

Plantaricin A (plA) is a 26-residue bacteria-produced peptide pheromone with membrane-permeabilizing antimicrobial activity. In this study the interaction of plA with membranes is shown to be highly dependent on the membrane lipid composition. PlA bound readily to zwitterionic 1-stearoyl-2-oleoyl-sn-glycero-3-phosphocholine (SOPC) monolayers and liposomes, yet without significantly penetrating into these membranes. The presence of cholesterol attenuated the intercalation of plA into SOPC monolayers. The association of plA to phosphatidylcholine was, however, sufficient to induce membrane permeabilization, with nanomolar concentrations of the peptide triggering dye leakage from SOPC liposomes. The addition of the negatively charged phospholipid, 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-rac-glycerol POPG (SOPC/POPG; molar ratio 8:2) enhanced the membrane penetration of the peptide, as revealed by (i) peptide-induced increment in the surface pressure of lipid monolayers, (ii) increase in diphenylhexatriene (DPH) emission anisotropy measured for bilayers, and (iii) fluorescence characteristics of the two Trps of plA in the presence of liposomes, measured as such as well as in the presence of different quenchers. Despite deeper intercalation of plA into the SOPC/POPG lipid bilayer, much less peptide-induced dye leakage was observed for these liposomes than for the SOPC liposomes. Further changes in the mode of interaction of plA with lipids were evident when also the zwitterionic phospholipid, 1-palmitoyl-2-oleoyl-sn-glycerol-3-phosphoethanolaminne (POPE) was present (SOPC/POPG/POPE, molar ratio 3:2:5), thus suggesting increase in membrane spontaneous negative curvature to affect the mode of association of this peptide with lipid bilayer. PlA induced more efficient aggregation of the SOPC/POPG and SOPC/POPG/POPE liposomes than of the SOPC liposomes, which could explain the attenuated peptide-induced dye leakage from the former liposomes. At micromolar concentrations, plA killed human leukemic T-cells by both necrosis and apoptosis. Interestingly, plA formed supramolecular protein-lipid amyloid-like fibers upon binding to negatively charged phospholipid-containing membranes, suggesting a possible mechanistic connection between fibril formation and the cytotoxicity of plA.     

Membrane incorporation and induction of secondary structure of synthetic peptides corresponding to the N-terminal signal sequences of the glucitol and mannitol permeases of Escherichia coli

The 22-residue synthetic signal peptide of the glucitol permease (Enzyme IIgut of the bacterial phosphotransferase system; gut22), which in the intact protein is believed to function in envelope targeting, was found to insert into phospholipid monolayers of various phospholipid compositions up to high limiting pressures (36-41 milliNewton/m). The partition coefficient, derived from monolayer area expansion experiments, was greatest for the negatively charged gut22 when partitioning into monolayers of the zwitterionic lipid 1-palmitoyl-2-oleoyl-3-sn-phosphatidylcholine (about 1.1 X 10(5] as compared with that obtained with a mixture of 1-palmitoyl-2-oleoyl-3-sn-phosphatidylcholine and the negatively charged lipids 1-palmitoyl-2-oleoyl-3-sn-phosphatidylglycerol and cardiolipin. Gut22 contains a titratable histidyl residue (pKa = 6.8), and its protonation decreased the relative monolayer area increase 3-fold. Circular dichroism spectra showed that gut22 formed an amphiphilic alpha-helix when incorporated into lipid membranes (estimated percent helix = 65%). Fluorescence measurements indicated that tryptophan 11 is in a more hydrophobic environment in the presence of lipid than in its absence, with the environment being more hydrophobic at pH 5 than at pH 8. The more hydrophilic 15-residue signal peptide of the mannitol permease (mtl15) also incorporated into monolayers and detergent micelles (although to a lesser extent) with induction of secondary structure. Based on these results and a parallel with mitochondrial targeting in eucaryotes, we suggest that the induction of N-terminal amphiphilic structures and their association with a hydrophobic-hydrophilic interface are important for envelope targeting and the initiation of the membrane insertion of bacterial phosphoenol-pyruvate-dependent phosphotransferase system permeases.     

The phase property of membrane phospholipids is affected by the functionality of signal peptides from the Escherichia coli ribose-binding protein

We examined the effects of synthetic signal peptides from the wild-type, export-defective mutant and its revertant species of ribose-binding protein on the phase properties of lipid bilayers. The lateral segregation of phosphatidylglycerol (PG) in the lipid bilayer was detected through quenching between NBD-PGs upon the reconstitution of signal peptide into the liposome made with the Escherichia coli inner membrane composition. The tendency of lipid segregation was highly dependent on the export competency of signal peptides in vivo, with a decreasing order of wild-type, revertant, and mutant species. The colocalizations of pyrene-PG with BODIPY-PG were also induced by the signal peptides, confirming the phase separation of the acidic phospholipid. The wild-type and revertant signal peptides predominantly formed alpha-helical conformations with the presence of acidic phospholipid as determined by circular dichroism spectroscopy. In addition, they restricted the motion of lipid acyl chains as monitored by fluorescence anisotropy of DPH, suggesting a deep penetration of signal peptide into the lipid bilayer. However, the alpha-helical content of mutant signal peptide was only about half that of the wild-type or revertant peptide with a significantly smaller degree of penetration into the bilayer. An association of the defective signal peptides into the membrane was affected by salt extraction, whereas the functional ones were not. The aforementioned results indicate that the functionality of signal peptide is accomplished through its topologies in the membrane and also by its ability to induce lateral segregation of acidic phospholipid. We propose that the clustering of acidic phospholipid by the functional signal peptide is responsible for the formation of non-bilayer membrane structure, thereby promoting an efficient translocation of secretory proteins.     

Anionic phospholipids are essential for alpha-helix formation of the signal peptide of prePhoE upon interaction with phospholipid vesicles.

The conformational consequences of the interaction of the PhoE signal peptide with bilayers of different types of phospholipids was investigated using circular dichroism. It was found that interaction of the signal peptide with anionic phospholipid vesicles of dioleoylphosphatidylglycerol and dioleoylphosphatidylserine results in induction of high amounts of alpha-helical structure of 70% and 57%, respectively. Upon addition of the signal peptide to cardiolipin vesicles, less but still significant alpha-helical structure was induced (29%). In contrast, no alpha-helix formation was observed upon the interaction of the signal peptide with zwitterionic dioleoylphosphatidylcholine vesicles. In bilayers of dioleoylphosphatidylcholine with dioleoylphosphatidylglycerol, it was shown that in the presence of 100 mM NaCl a minimum amount of 50% of negatively charged lipid was required for induction of the maximal percentage of alpha-helix, whereas in the absence of salt a minimum amount of 35% of negatively charged lipid was necessary. Induction of alpha-helix structure appeared to be correlated with functionality, since, in a less functional analogue of the PhoE signal peptide, the PhoE-[Asp-19,20] signal peptide, less alpha-helix was induced than in the wild-type PhoE signal peptide. It is proposed that the interaction with anionic phospholipids is essential for a functional conformation of the PhoE signal sequence during protein translocation.