Role of the major homology region of human immunodeficiency virus type 1 in virion morphogenesis.

Retroviral capsid (CA) proteins contain a uniquely conserved stretch of 20 amino acids which has been named the major homology region (MHR). To examine the role of this region in human immunodeficiency virus type 1 morphogenesis and replication, four highly conserved positions in the MHR were individually altered by site-directed mutagenesis. Conservative substitution of two invariant residues (glutamine 155 and glutamic acid 159) abolished viral replication and significantly reduced the particle-forming ability of the mutant gag gene products. Conservative substitution of the third invariant residue in the MHR (arginine 167) or of an invariably aromatic residue (tyrosine 164) had only a moderate effect. However, removal of the extended side chains of these amino acids by substitution with alanine prevented viral replication and affected virion morphogenesis. The replacement of tyrosine 164 with alanine substantially impaired viral particle production. By contrast, the substitution of arginine 167 with alanine had only a two- to threefold effect on particle yield but led to the formation of aberrant core structures. The MHR mutant which were severely defective for particle production had a dominant negative effect on particle formation by the wild-type Gag product. The role of the MHR in the incorporation of the Gag-Pol precursor was examined by expressing the Gag and Gag-Pol polyproteins individually from separate plasmids. Only when the two precursor polyproteins were coexpressed did processed Gag and Pol products appear in the external medium. The appearance of these products was unaffected or only moderately affected by substitutions in the MHR of the Gag-Pol precursor, suggesting that the mutant Gag-Pol precursors were efficiently incorporated into viral particles. The results of this study indicate that specific residues within the MHR are required both for human immunodeficiency virus type 1 particle assembly and for the correct assembly of the viral core. However, mutant Gag and Gag-Pol polyproteins with substitutions in the MHR retained the ability to interact with wild-type Gag protein.     

Requirements for incorporation of Pr160gag-pol from human immunodeficiency virus type 1 into virus-like particles.

The roles of the human immunodeficiency virus precursor polyproteins Pr55gag and Pr160gag-pol in viral core assembly were studied in CMT3-COS cells. To do this, the precursors were expressed separately by using a simian virus 40 late replacement vector system described previously. Consistent with previously published data, our results show that the Pr55gag precursor, when expressed alone, was able to form particles which had an immature morphology and that particle formation required the presence of a myristate addition signal at the amino terminus of the precursor. In contrast, the Pr160gag-pol precursor was not able to form particles when expressed alone, although it still underwent proteolytic processing. Coexpression of the two precursor polyproteins from separate vectors in the same cell resulted in processing of the Pr55gag in trans by the protease embedded in Pr160gag-pol and the formation of virus-like particles containing the products of both precursors. Proteolytic processing occurred independently of the presence of a functional myristate addition signal on either precursor. On the other hand, removal of myristate from one or the other precursor had nonreciprocal effects on virus particle formation. Cells expressing Pr55gag lacking myristate and Pr160gag-pol containing it did not produce particles. Cells expressing a myristylated Pr55gag and unmyristylated Pr160gag-pol still produced virus-like particles which contained nearly normal amounts of Pr160gag-pol. The results suggest that the incorporation of Pr160gag-pol into particles is largely determined by intermolecular protein-protein interactions between the two precursor polypeptides.     

Proteolytic activity of novel human immunodeficiency virus type 1 proteinase proteins from a precursor with a blocking mutation at the N terminus of the PR domain.

The mature human immunodeficiency virus type 1 proteinase (PR; 11 kDa) can cleave all interdomain junctions in the Gag and Gag-Pol polyprotein precursors. To determine the activity of the enzyme in its precursor form, we blocked release of mature PR from a truncated Gag-Pol polyprotein by introducing mutations into the N-terminal Phe-Pro cleavage site of the PR domain. The mutant precursor autoprocessed efficiently upon expression in Escherichia coli. No detectable mature PR was released; however, several PR-related products ranging in size from approximately 14 to 18 kDa accumulated. Products of the same size were generated when mutant precursors were digested with wild-type PR. Thus, PR can utilize cleavage sites in the region upstream of the PR domain, resulting in the formation of extended PR species. On the basis of active-site titration, the PR species generated from mutated precursor exhibited wild-type activity on peptide substrates. However, the proteolytic activity of these extended enzymes on polyprotein substrates provided exogenously was low when equimolar amounts of extended and wild-type PR proteins were compared. Mammalian cells expressing the mutated precursor produced predominantly precursor and considerably reduced amounts of mature products. Released particles consisted mostly of uncleaved or partially cleaved polyproteins. Our results suggest that precursor forms of PR can autoprocess but are less efficient in processing of the Gag precursor for formation of mature virus particles.     

The C-Terminal Half of the Human Immunodeficiency Virus Type 1 Gag Precursor Is Sufficient for Efficient Particle Assembly

Human immunodeficiency virus type 1 particle assembly is directed by the Gag polyprotein Pr55^gag, the precursor for the matrix (MA), capsid (CA), and nucleocapsid proteins of the mature virion. We now show that CA sequences N terminal to the major homology region (MHR), which form a distinct domain, are dispensable for particle formation. However, slightly larger deletions which extend into the MHR severely impair particle production. Remarkably, a deletion which removed essentially all MA and CA sequences between the N-terminal myristyl anchor and the MHR reduced the yield of extracellular particles only moderately. Particle formation even exceeded wild-type levels when additional MA sequences, either from the N or the C terminus of the domain, were retained. We conclude that no distinct region between the myristyl anchor and the MHR is required for efficient particle assembly or release.     

Immunological characterization of the gag gene products of bovine immunodeficiency virus.

The bovine immunodeficiency virus (BIV) gag gene encodes a 53-kDa precursor (Pr53gag) that is involved in virus particle assembly and is further processed into the putative matrix (MA), capsid (CA), and nucleocapsid (NC) functional domains in the mature virus. Gag determinants are also found in the Gag-Pol polyprotein precursor. To immunologically identify the major precursors and processed products of the BIV gag gene, monospecific rabbit sera to recombinant BIV MA protein and Pr53gag and peptides predicted to correspond to the CA and NC proteins and the MA-CA cleavage site were developed and used in immunoprecipitations and immunoblots of BIV antigens. Monospecific antisera to native and recombinant human immunodeficiency virus type 1 proteins were also used to identify analogous BIV Gag proteins and to determine whether cross-reactive epitopes were present in the BIV Gag precursors or processed products. The BIV MA, CA, and NC Gag proteins were identified as p16, p26, and p13, respectively. In addition to BIV Pr53gag, the major Gag precursor, two other Gag-related precursors of 170 and 49 kDa were identified that have been designated pPr170gag-pol and Pr49gag, respectively; pPr170gag-pol is the Gag-Pol polyprotein precursor, and Pr49gag is the transframe Gag precursor present in pPr170gag-pol. Several alternative Gag cleavage products were also observed, including p23, which contains CA and NC determinants, and p10, which contains a peptide sequence conserved in the CA proteins of most lentiviruses. The monospecific antisera to human immunodeficiency virus type 1 CA (p24) and NC (p7) proteins showed cross-reactivity to and aided in the identification of analogous BIV proteins. Based on the present data, a scheme for the processing of BIV Gag precursors is proposed.     

A cell-line-specific defect in the intracellular transport and release of assembled retroviral capsids

Retrovirus assembly involves a complex series of events in which a large number of proteins must be targeted to a point on the plasma membrane where immature viruses bud from the cell. Gag polyproteins of most retroviruses assemble an immature capsid on the cytoplasmic side of the plasma membrane during the budding process (C-type assembly), but a few assemble immature capsids deep in the cytoplasm and are then transported to the plasma membrane (B- or D-type assembly), where they are enveloped. With both assembly phenotypes, Gag polyproteins must be transported to the site of viral budding in either a relatively unassembled form (C type) or a completely assembled form (B and D types). The molecular nature of this transport process and the host cell factors that are involved have remained obscure. During the development of a recombinant baculovirus/insect cell system for the expression of both C-type and D-type Gag polyproteins, we discovered an insect cell line (High Five) with two distinct defects that resulted in the reduced release of virus-like particles. The first of these was a pronounced defect in the transport of D-type but not C-type Gag polyproteins to the plasma membrane. High Five cells expressing wild-type Mason-Pfizer monkey virus (M-PMV) Gag precursors accumulate assembled immature capsids in large cytoplasmic aggregates similar to a transport-defective mutant (MA-A18V). In contrast, a larger fraction of the Gag molecules encoded by the M-PMV C-type morphogenesis mutant (MA-R55W) and those of human immunodeficiency virus were transported to the plasma membrane for assembly and budding of virions. When pulse-labeled Gag precursors from High Five cells were fractionated on velocity gradients, they sedimented more rapidly, indicating that they are sequestered in a higher-molecular-mass complex. Compared to Sf9 insect cells, the High Five cells also demonstrate a defect in the release of C-type virus particles. These findings support the hypothesis that host cell factors are important in the process of Gag transport and in the release of enveloped viral particles.     

The human immunodeficiency virus type 1 carboxyl-terminal third of capsid sequence in Gag-Pol is essential but not sufficient for efficient incorporation of Pr160<Superscript><Emphasis Type="Italic">gag-pol</Emphasis></Superscript> into virus particles

To elucidate the role of the C-terminal portion of Gag in the incorporation of human immunodeficiency virus type 1 (HIV-1) Gag-Pol into virus particles, a series of HIV-1 Gag-Pol mutants with deletions in the C-terminalgag sequence was constructed and viral incorporation of the Gag-Pol deletion mutants was analyzed using cotransfecting 293T cells with a Pr55 ^gag expression plasmid. The biological function of the incorporated HIV-1pol gene product was tested using an infectivity assay of the released virus particles which were pseudotyped with the murine leukemia virus Env. Analysis indicated that Gag-Pol deletion mutants, with a removal of the matrix (MA) and/or nucleocapsid (NC) or of the N-terminal two thirds of thegag coding sequence, could be incorporated efficiently into virus particles and produce significant amounts of infectious virions when assayed in a single-cycle infection assay. In contrast, mutations involving a deletion of the major homology region and the adjacent C-terminal capsid sequence significantly affected Gag-Pol incorporation. However, incorporation into virus particles of a Gag-Pol deletion mutant retaining both the major homology region and the adjacent C-terminal capsid intact was still severely impaired. This suggests that the capsid major homology region and the adjacent C-terminal capsid sequence in Gag-Pol are necessary but not sufficient for the incorporation of HIV-1 Pr160 ^gag-pol into virus particles.     

Structural interactions between retroviral Gag proteins examined by cysteine cross-linking.

We have examined structural interactions between Gag proteins within Moloney murine leukemia virus (M-MuLV) particles by making use of the cysteine-specific cross-linking agents iodine and bis-maleimido hexane. Virion-associated wild-type M-MuLV Pr65Gag proteins in immature particles were intermolecularly cross-linked at cysteines to form Pr65Gag oligomers, from dimers to pentamers or hexamers. Following a systematic approach of cysteine-to-serine mutagenesis, we have shown that cross-linking of Pr65Gag occurred at cysteines of the nucleocapsid (NC) Cys-His motif, suggesting that the Cys-His motifs within virus particles are packed in close proximity. The M-MuLV Pr65Gag protein did not cross-link to the human immunodeficiency virus Pr55Gag protein when the two molecules were coexpressed, indicating either that they did not coassemble or that heterologous Gag proteins were not in close enough proximity to be cross-linked. Using an assembly-competent, protease-minus, cysteine-minus Pr65Gag protein as a template, novel cysteine residues were generated in the M-MuLV capsid domain major homology region (MHR). Cross-linking of proteins containing MHR cysteines showed above-background levels of Gag-Gag dimers but also identified a novel cellular factor, present in virions, that cross-linked to MHR residues. Although the NC cysteine mutation was compatible with M-MuLV particle assembly, deletions of the NC domain were not tolerated. These results suggest that the Cys-His motif is held in close proximity within immature M-MuLV particles by interactions between CA domains and/or non-Cys-His motif domains of the NC.     

Relationship between human immunodeficiency virus type 1 Gag multimerization and membrane binding

The human immunodeficiency virus type 1 (HIV-1) Gag precursor, Pr55(Gag), is necessary and sufficient for the assembly and release of viruslike particles. Binding of Gag to membrane and Gag multimerization are both essential steps in virus assembly, yet the domains responsible for these events have not been fully defined. In addition, the relationship between membrane binding and Gag-Gag interaction remains to be elucidated. To investigate these issues, we analyzed, in vivo, the membrane-binding and assembly properties of a series of C-terminally truncated Gag mutants. Pr55(Gag) was truncated at the C terminus of matrix (MAstop), between the N- and C-terminal domains of capsid (CA146stop), at the C terminus of capsid (p41stop), at the C terminus of p2 (p43stop), and after the N-terminal 35 amino acids of nucleocapsid (NC35stop). The ability of these truncated Gag molecules to assemble and release viruslike particles and their capacity to copackage into particles when coexpressed with full-length Gag were determined. We demonstrate that the amount of truncated Gag incorporated into particles is incrementally increased by extension from CA146 to NC35, suggesting that multiple sites in this region are involved in Gag multimerization. Using membrane flotation centrifugation, we observe that MA shows significantly reduced membrane binding relative to full-length Gag but that CA146 displays steady-state membrane-binding properties comparable to those of Pr55(Gag). The finding that the CA146 mutant, which contains only matrix and the N-terminal domain of capsid, exhibits levels of steady-state membrane binding equivalent to those of full-length Gag indicates that strong Gag-Gag interaction domains are not required for the efficient binding of HIV-1 Gag to membrane.     

Effects of nucleocapsid mutations on human immunodeficiency virus assembly and RNA encapsidation.

The human immunodeficiency virus (HIV) Pr55Gag precursor proteins direct virus particle assembly. While Gag-Gag protein interactions which affect HIV assembly occur in the capsid (CA) domain of Pr55Gag, the nucleocapsid (NC) domain, which functions in viral RNA encapsidation, also appears to participate in virus assembly. In order to dissect the roles of the NC domain and the p6 domain, the C-terminal Gag protein domain, we examined the effects of NC and p6 mutations on virus assembly and RNA encapsidation. In our experimental system, the p6 domain did not appear to affect virus release efficiency but p6 deletions and truncations reduced the specificity of genomic HIV-1 RNA encapsidation. Mutations in the nucleocapsid region reduced particle release, especially when the p2 interdomain peptide or the amino-terminal portion of the NC region was mutated, and NC mutations also reduced both the specificity and the efficiency of HIV-1 RNA encapsidation. These results implicated a linkage between RNA encapsidation and virus particle assembly or release. However, we found that the mutant ApoMTRB, in which the nucleocapsid and p6 domains of HIV-1 Pr55Gag were replaced with the Bacillus subtilis MtrB protein domain, released particles efficiently but packaged no detectable RNA. These results suggest that, for the purposes of virus-like particle assembly and release, NC can be replaced by a protein that does not appear to encapsidate RNA.     

Incorporation of Pr160(gag-pol) into virus particles requires the presence of both the major homology region and adjacent C-terminal capsid sequences within the Gag-Pol polyprotein.

The determinants critical for the incorporation of Pr160(gag-pol) into human immunodeficiency virus type 1 (HIV-1) particles were examined by cotransfecting cells with (i) a plasmid expressing wild-type Gag protein and (ii) a series of chimeric Gag-Pol expression plasmids in which individual murine leukemia virus (MLV) Gag regions and subdomains precisely replaced their HIV-1 counterparts. The presence of the MLV MA and NC Gag regions in the chimeric Gag-Pol precursor had no detectable effect on the incorporation of Gag-Pol into progeny virions. In contrast, the entire HIV-1 CA region was required to achieve wild-type levels of Gag-Pol assembly into particles; both the CA major homology region and the adjacent C-terminal CA sequences play dominant roles in this process yet, when assayed in the context of a chimeric Gag-Pol polyprotein, restored the defect affecting Gag-Pol incorporation to approximately half of the wild-type level.     

Incorporation of human immunodeficiency virus type 1 Gag proteins into murine leukemia virus virions.

The retroviral Gag polyprotein is necessary and sufficient for assembly and budding of viral particles. However, the exact inter- and intramolecular interactions of the Gag polyproteins during this process are not known. To locate functional domains within Gag, we generated chimeric proviruses between human immunodeficiency virus type 1 (HIV-1) and murine leukemia virus (MuLV). In these chimeric proviruses, the matrix or capsid proteins of MuLV were precisely replaced with the matrix or capsid proteins of HIV-1. Although the chimeric proviruses were unable to efficiently assemble into mature viral particles by themselves, coexpression of wild-type MuLV Gag rescued the HIV proteins into virions. The specificity of the rescue of HIV proteins into MuLV virions shows that specific interactions involving homologous matrix or capsid regions of Gag are necessary for retroviral particle formation.     

Functional domains of the capsid protein of human immunodeficiency virus type 1.

A series of deletions was introduced into the CA domain of the human immunodeficiency virus type 1 Gag polyprotein to examine its role in virus particle and core formation. The mutations resulted in two phenotypes, indicating the existence of two functionally distinct regions within the CA domain. Deletions within a conserved stretch of 20 amino acids referred to as the major homology region (MHR) and deletions C terminal to this region blocked virus replication and significantly reduced the ability to form viral particles. Deletions N terminal to the MHR also prevented virus replication, but the mutants retained the ability to assemble and release viral particles with the same efficiency as the wild-type virus. The mutant particles contained circular rather than cone-shaped cores, and while they were of a density similar to that of wild-type particles, they were more heterogeneous in size. These results indicate that CA domain sequences N terminal to the MHR are essential for the morphogenesis of the mature cone-shaped core.     

Efficient particle formation can occur if the matrix domain of human immunodeficiency virus type 1 Gag is substituted by a myristylation signal.

Lentiviruses, such as human immunodeficiency virus type 1 (HIV-1), assemble at and bud through the cytoplasmic membrane. Both the matrix (MA) domain of Gag and its amino-terminal myristylation have been implicated in these processes. We have created HIV-1 proviruses lacking the entire matrix domain of gag which either lack or contain an amino-terminal myristate addition sequence at the beginning of the capsid domain. Myristate- and matrix-deficient [myr(-)MA(-)] viruses produced after transient transfection are still able to assemble into particles, although the majority do not form at the plasma membrane or bud efficiently. Myristylation of the amino terminus of the truncated Gag precursor permits a much more efficient release of the mutant virions. While myr(-)MA(-) particles were inefficient in proteolytic processing of the Gag precursor, myristylation enabled efficient proteolysis of the mutant Gag. All matrix-deficient viruses are noninfectious. Particles produced by matrix-deficient mutants contain low levels of glycoproteins, indicating the importance of matrix in either incorporation or stable retention of Env. Since matrix-deficient viruses contain a normal complement of viral genomic RNA, a role for MA in genomic incorporation can be excluded. Contrary to previous reports, the HIV-1 genome does not require sequences between the 5' splice donor site and the gag start codon for efficient packaging.     

Identification of domains in the simian immunodeficiency virus matrix protein essential for assembly and envelope glycoprotein incorporation.

The matrix domain (MA) of the simian immunodeficiency virus (SIV) is encoded by the amino-terminal region of the Gag polyprotein precursor and is the component of the viral capsid that lines the inner surface of the virus envelope. To define domains of the SIV MA protein that are involved in virus morphogenesis, deletion and substitution mutations were introduced in this protein in the context of a gag-protease construct and expressed in the vaccinia virus vector system. The MA mutants were characterized with respect to synthesis and processing of the Gag precursor, assembly and release of virus-like particles, and incorporation of the envelope (Env) glycoprotein into particles. We have identified two regions of the SIV MA which are critical for particle formation. Both domains are located in a central hydrophobic alpha-helix of the SIV MA, according to data on the structure of this protein. In addition, we have characterized a domain whose mutation impairs the incorporation of SIV Env glycoproteins with long transmembrane cytoplasmic tails into particles. Interestingly, these mutant particles retained the ability to associate with SIV Env proteins with short cytoplasmic tails.     

Incorporation of pseudorabies virus gD into human immunodeficiency virus type 1 Gag particles produced in baculovirus-infected cells.

The human immunodeficiency virus type 1 (HIV-1) Pr55gag precursors were previously shown to assemble and bud efficiently as noninfectious virus-like particles (VLPs) when expressed in baculovirus-infected insect cells. In this study, we examined the abilities of foreign antigens to be incorporated on the outer surface of HIV-1 Gag particles. We have used a dual recombinant baculovirus, expressing the HIV-1 Gag gene and gD gene under the control of the P10 and polyhedrin promoters, respectively, to obtain hybrid VLPs. Transmission electron microscopy of insect cells infected with the dual recombinant revealed very large aggregates of particles budding from the cell membrane. The release of VLPs into the culture medium was clearly different for a recombinant baculovirus producing solely HIV-1 Gag, for which particles were uniformly distributed all around the cell surface. Biochemical analysis of hybrid particles indicated that glycoprotein gD was packaged into HIV-1 Gag VLPs. Moreover, the carboxy-terminal p6 region of Gag polyprotein and the glycoprotein gD intracytoplasmic domain were not required for gD incorporation. The experiments described here clearly demonstrate that glycoprotein gD can be packaged with HIV-1 Gag particles and released from insect cells.     

Mutations in the N-terminal region of human immunodeficiency virus type 1 matrix protein block intracellular transport of the Gag precursor.

The matrix domain of human immunodeficiency virus type 1 Gag polyprotein was studied for its role in virus assembly. Deletion and substitution mutations caused a dramatic reduction in virus production. Mutant Gag polyproteins were myristoylated and had a high affinity for membrane association. Immunofluorescence staining revealed a large accumulation of mutant Gag precursors in the cytoplasm, while wild-type Gag proteins were primarily associated with the cell surface membrane. These results suggest a defect in intracellular transport of the mutant Gag precursors. Thus, in addition to myristoylation, the N-terminal region of the matrix domain is involved in determining Gag protein transport to the plasma membrane. Wild-type Gag polyproteins interacted with and efficiently packaged mutant Gag into virions. This finding is consistent with the hypothesis that intermolecular interaction of Gag polyproteins might occur in the cytoplasm prior to being transported to the assembly site on the plasma membrane.     

The p6gag domain of human immunodeficiency virus type 1 is sufficient for the incorporation of Vpr into heterologous viral particles.

The vpr gene of human immunodeficiency virus type 1 (HIV-1) encodes a virion-associated regulatory protein. Mutagenesis has shown that the virion association of Vpr requires sequences near the C terminus of the HIV-1 Gag polyprotein Pr55gag. To investigate whether Vpr incorporation is mediated by a specific domain of Pr55gag, we examined the ability of chimeric HIV-1/Moloney murine leukemia virus (MLV) Gag polyproteins to direct the incorporation of Vpr. Vpr expressed in trans did not associate with particles formed by the authentic MLV Gag polyprotein or with particles formed by chimeric Gag polyproteins that had the matrix (MA) or capsid (CA) domain of MLV precisely replaced by the corresponding domain of HIV-1HXB2. By contrast, Vpr was efficiently incorporated upon replacement of the C-terminal nucleocapsid (NC) domain of the MLV Gag polyprotein with HIV-1 p15 sequences. Vpr was also efficiently incorporated into particles formed by a MLV Gag polyprotein that had the HIV-1 p6 domain fused to its C terminus. Furthermore, a deletion analysis revealed that a conserved region near the C terminus of the p6 domain is essential for Vpr incorporation, whereas sequences downstream of the conserved region are dispensable. These results show that a virion association motif for Vpr is located within residues 1 to 46 of p6.