CRISPR analysis of bacteriophage‐insensitive mutants (BIMs) of industrial Streptococcus thermophilus– implications for starter design

Aims: An efficient approach for generation of bacteriophage‐insensitive mutants (BIMs) of Streptococcus thermophilus starters was described in our laboratory [Mills et al. (2007) J Microbiol Methods 70 , 159–164]. The aim of this study was to analyse the phage resistance mechanism responsible for BIM formation. Methods and Results: Three clustered regularly interspaced short palindromic repeat (CRISPR) regions have been identified in Strep. thermophilus, and Strep. thermophilus can integrate novel spacers into these loci in response to phage attack. Characterization of three sets of BIMs indicated that two sets had altered CRISPR1 and/or CRISPR3 loci. A range of BIMs of yoghurt starter CSK938 were generated with the same phage in different phage challenge experiments, and each acquired unique spacer regions ranging between one and four new spacers in CRISPR1. In addition, the BIM that acquired only one new spacer in CRISPR1 also acquired an additional spacer in CRISPR3. A fourth BIM, generated with a different phage, had two spacers deleted from CRISPR1 but acquired two spacers in CRISPR3. Analysis of the Mozzarella starter CSK939 and its associated BIMs indicated that formation of second generation BIMs does not lead to increases in spacer number but to alterations in spacer regions. BIMs of an exopolysaccharide (EPS)‐producing strain that lost the ability to produce EPS did not harbour an altered CRISPR, suggesting that phage sensitivity may be related to the EPS‐producing phenotype. Conclusions: Acquisition/deletion of new spacers in CRISPR loci in response to phage attack generates distinctly individual variants. It also demonstrates that other modifications may be responsible for the phage resistance of Strep. thermophilus BIMs. Significance and Impact of the Study: Isolation of individual BIMs that have unique spacers towards the leader region of the CRISPR locus may be a very useful approach for rotation strategies with the same starter backbone. Upon phage infection, BIMs ‘in reserve’ can be slotted into the rotation scheme.     

Genotyping of Streptococcus thermophilus strains isolated from traditional Egyptian dairy products by sequence analysis of the phosphoserine phosphatase (serB) gene with phenotypic characterizations of the strains

Aims: To develop a new, simplified genotyping method for examining the genetic diversity of Streptococcus thermophilus strains isolated from traditional Egyptian fermented dairy products and to characterize phenotypic traits of those strains related to their potential use in bioprocessing applications. Methods and Results: A novel, simplified approach was developed for genotyping Strep. thermophilus involving the analysis of nucleotide sequence variations within a housekeeping gene encoding the phosphoserine phosphatase (SerB). Using this method, it was possible to identify ten genotypes involving diverse serB alleles among 54 Strep. thermophilus isolates cultured from Egyptian dairy products. These isolates harboured five de novo serB alleles that have not been detected in other Strep. thermophilus strains, deposited in a multilocus sequence typing (MLST) database. To assess distinct genotypes of the organism with phenotypic traits relevant to their potential use in industry, Strep. thermophilus strains were all subjected to a series of phenotypic characterizations. The strains were found to exhibit phenotypic diversity in terms of their ability to ferment lactose and galactose, express urease activity, produce exopolysaccharides and develop acidity. Conclusions: The analysis of nucleotide sequence variations within the serB gene could serve as a suitable tool for probing diverse genotypes of Strep. thermophilus. Streptococcus thermophilus isolates associated with traditional Egyptian dairy products show high degree of genetic and phenotypic diversity. Significance and Impact of the Study: This study presents a novel, simplified procedure based on serB nucleotide sequencing for genotyping Strep. thermophilus. It also provides a pool of phenotypically diverse Strep. thermophilus cultures, from which certain strains could be selected for use in bioprocessing applications including the preparation of fermented dairy products.     

A food‐grade site‐directed mutagenesis system for Streptococcus thermophilus LMG 18311

Aims: To develop a general method for site‐directed mutagenesis in the dairy starter strain Streptococcus thermophilus LMG 18311 which does not depend on antibiotic‐resistance genes or other selection markers for the identification of transformants. Methods and Results: In a previous study, we demonstrated that Strep. thermophilus LMG 18311 can be made competent for natural genetic transformation by overexpression of the alternative sigma factor ComX. In the present study, we wanted to investigate whether the natural transformation mechanism of Strep. thermophilus LMG 18311 is efficient enough to make it feasible to perform site‐directed mutagenesis in this strain without the use of a selection marker. Competent bacteria were mixed with a DNA fragment engineered to contain a nonsense and a frameshift mutation in the middle of the target gene (lacZ) and subsequently seeded on agar plates. By performing colony‐lift hybridization using a digoxigenin‐labelled oligonucleotide probe, we succeeded in identifying transformants containing the sought after mutation. Conclusions: By exploiting the natural transformability of Strep. thermophilus LMG 18311 and standard molecular methods, we have demonstrated that the genome of this bacterium can be altered at preselected sites without introduction of any foreign DNA. Significance and Impact of the Study: A food‐grade site‐directed mutagenesis system has been developed for Strep. thermophilus LMG 18311 that can be used by the dairy industry to construct starter strains with novel and/or improved properties.     

Characterization of phage receptors in Streptococcus thermophilus using purified cell walls obtained by a simple protocol

A simple protocol was designed and applied to obtain Streptococcus thermophilus purified cell walls. To identify the structures involved in phage adsorption, the cell walls of two Strep. thermophilus strains were treated with sodium dodecyl sulphate and proteinase K. These treatments did not reduce the adsorption of phages CYM and 0BJ to the cell walls of Strep. thermophilus YSD10 and Strep. thermophilus BJ15, respectively. However, phage binding was reduced when the cell envelopes were treated with mutanolysin or trichloroacetic acid 5%, suggesting that the phage receptor component is part of the peptidoglycan or a polymer closely linked to it. The ability of several saccharides to inactivate both phages was also assayed. These phage inhibition experiments suggested that the phage CYM adsorbed to a component involving glucosamine and rhamnose, while glucosamine and ribose interfered with the adsorption of phage 0BJ.     

Isolation and phenotypic characterization of Lactobacillus casei and Lactobacillus paracasei bacteriophage-resistant mutants

Aims: To isolate and characterize bacterial strains derived from Lactobacillus casei and Lactobacillus paracasei strains and resistant to phage MLC‐A. Methods and Results: Two of nine assayed strains rendered resistant mutants with recovery efficiencies of 83% (Lact. paracasei ATCC 27092) and 100% (Lact. casei ATCC 27139). DNA similarity coefficients (RAPD–PCR) confirmed that no significant genetic changes occurred while obtaining resistant mutants. Neither parent nor mutant strains spontaneously released phages. Phage‐resistant mutants were tested against phages PL‐1, J‐1, A2 and MLC‐A8. Lactobacillus casei ATCC 27092 mutants showed, overall, lower phage resistance than Lact. paracasei ATCC 27092 ones, but still higher than that of the parent strain. Lactobacillus paracasei ATCC 27092 mutants moderately adsorbed phage MLC‐A only in calcium presence, although their parent strain successfully did it with or without calcium. Adsorption rates for Lact. casei ATCC 27139 and its mutants were highly influenced by calcium. Again, phage adsorption was higher on the original strain. Conclusions: Several isolates derived from two Lact. casei and Lact. paracasei strains showed resistance to phage MLC‐A but also to other Lact. casei and Lact. paracasei phages. Significance and Impact of the Study: This study highlights isolation of spontaneous bacteriophage‐resistant mutants from Lact. casei and Lact. paracasei as a good choice for use in industrial rotation schemes.     

Bacteriophage-resistance mechanisms examined by transfection of Lactococcus lactis subsp. lactis 4513-5 mediated by high voltage electroporation

Summary Phage adsorption tests and transfection by electroporation were carried out to decide whether phage-resistance in Lactococcus lactis subsp. lactis strain 4513-5 is based on intracellular or extracellular mechanisms. Using high voltage (12.5 kV/cm) electroporation, untreated phage DNA was introduced into phage-sensitive and phage-resistant cells. Since phages showed low adsorption frequencies on resistant bacteria, resistance is localized in the cell wall preventing phage DNA from entering the cell. This is the only mechanism responsible for the resistance of L. lactis subsp. lactis 4513-5 against its homologous phage P4513-K12 and non-homologous phages P05M-13 and P05M-47, but not against phage P530-7 and phage P530-12. In the case of the latter two phage strains, intracellular resistance mechanisms are involved and discussed.     

Some properties ofStreptococcus thermophilus bacteriophages

The morphology, host range, structural proteins and serological properties ofStreptococcus thermophilus phages isolated from Finnish cheese plants were investigated. The results show that all the nine phages belong morphologically to Ackermann’s group B1. The host—phage reactions and plating efficiency justify the division of these phages into four specificity groups. Most of the phages showed an absolute host specificity as to their plating efficiency but were not strictly specific in the adsorption to different hosts. The electrophoretic profiles of the structural proteins appeared nearly identical. Ten to eleven well separated proteins could be detected. The antiserum raised against one of the phages contained antibodies with different neutralization capacity depending on the phage. Using an immunoblotting technique, four structural proteins were detected that could bind phage antibodies.     

A cell wall-associated polysaccharide is required for bacteriophage adsorption to the Streptococcus thermophilus cell surface

Streptococcus thermophilus strain ST64987 was exposed to a member of a recently discovered group of S. thermophilus phages (the 987 phage group), generating phage-insensitive mutants, which were then characterized phenotypically and genomically. Decreased phage adsorption was observed in selected bacteriophage-insensitive mutants, and was partnered with a sedimenting phenotype and increased cell chain length or aggregation. Whole genome sequencing of several bacteriophage-insensitive mutants identified mutations located in a gene cluster presumed to be responsible for cell wall polysaccharide production in this strain. Analysis of cell surface-associated glycans by methylation and NMR spectroscopy revealed a complex branched rhamno-polysaccharide in both ST64987 and phage-insensitive mutant BIM3. In addition, a second cell wall-associated polysaccharide of ST64987, composed of hexasaccharide branched repeating units containing galactose and glucose, was absent in the cell wall of mutant BIM3. Genetic complementation of three phage-resistant mutants was shown to restore the carbohydrate and phage resistance profiles of the wild-type strain, establishing the role of this gene cluster in cell wall polysaccharide production and phage adsorption and, thus, infection.     

Phage resistance in lactic acid bacteria

The interactions between lactic acid bacteria and their phages are commercially significant. Current research has focused on the elucidation of the mechanisms and genetics of phage resistance. Phage resistance genes have been linked to plasmid DNA for Streptococcus lactis and Streptococcus cremoris, and preliminary studies suggest the operation of mechanisms such as the prevention of phage adsorption, restriction/modification, and abortive infection. Some phage resistance plasmids can be conjugally transferred, providing a means of dissemination among phage-sensitive strains for the construction of phage-resistant starter cultures.     

Morphology and General Characteristics of Lytic Phages Infective on Strains of <Emphasis Type="Italic">Bradyrhizobium japonicum</Emphasis>

Biological characteristics of three isolated phages (SR1, SR2, and SR3) lytic against three Bradyrhizobium japonicum strains were studied. These phages had no cross-infectivity among the host strains. Phage morphology indicates that they belonged to Siphoviridae (long noncontractile tail; SR1 and SR2) and Podoviridae (short tail; SR3) classes of bacteriophages. Lytic cycle of phages studied under identical conditions showed a distinct adsorption rate (67.3–99.1%), latent period (150–300 min), rise period (60–150 min), and burst size (110–200 pfu/cell). Stability in liquids and inactivation by osmotic shock, thermal, and ultraviolet irradiation were also distinct in this heterogeneous phage group. Influence of soil factors such as temperature, soil moisture, soil pH, and degree of phage adsorption to the soil on phage survival was determined. Major percent of free infective phages were obtained after desorption of phages from soil. Overall, temperature appeared to be the most important parameter affecting rhizobiophage survival in the soil.     

Comparative Studies on Generalized Transducing Bacteriophages of Proteus mirabilis, φm and π1

Comparative studies were made on the generalized transducing bacteriophages of Proteus mirabilis φm (Nakaya and Rownd), π1 (Böhme), and a clear plaque-forming mutant φm-c, derived from φm. Electron microscopic observations revealed that these phages were morphologically identical, indicating that they belonged to the group C of Bradley's classification, or to the type Cl of Ackermann's classification. Phages φm and π1 formed characteristic turbid plaques different from each other, and the plaques of π1 were smaller in size than those of φm. The plaques of phage φm-c were clear and also were the largest in size among those studied. Average latent periods of φm and π1 were 70 and 60 min, respectively. Average burst size was found to be 30 and 10 plaque-forming units per infected cell for φm and π1, respectively. It was confirmed by cross neutralization tests that φm and π1 differed serologically from each other. The host range of the two phages also differed, and phage φm was more sensitive to heat than π1. These results indicate that phages φm and π1 are different types of phages. Majority of the properties of phage φm-c were nearly identical with those of phage π1 except that the multiplication of φm-c was more strongly inhibited by methylene blue than that of φm and π1. Phage φm-c is considered to be a clear mutant of φm.     

Adsorption of temperate phages of Lactobacillus delbrueckii strains and phage resistance linked to their cell diversity

Aims: The aim of this work was to study the adsorption step of two new temperate bacteriophages (Cb1/204 and Cb1/342) of Lactobacillus delbrueckii and to isolate phage‐resistant derivatives with interesting technological properties. Methods and Results: The effect of divalent cations, pH, temperature and cell viability on adsorption step was analysed. The Ca²⁺ presence was necessary for the phage Cb1/342 but not for the phage Cb1/204. Both phages showed to be stable at pH values between 3 and 8. Their adsorption rates decreased considerably at pH 8 but remained high at acid pH values. The optimum temperatures for the adsorption step were between 30 and 40°C. For the phage Cb1/342, nonviable cells adsorbed a lower quantity of phage particles in comparison with the viable ones, a fact that could be linked to disorganization of phage receptor sites and/or to the physiological cellular state. The isolation of phage‐resistant derivatives with good technological properties from the sensitive strains and their relationship with the cell heterogeneity of the strains were also made. Conclusions: Characterization of the adsorption step for the first temperate Lact. delbrueckii phages isolated in Argentina was made, and phage‐resistant derivatives of their host strains were obtained. Significance and Impact of the Study: Some phage‐resistant derivatives isolated exhibited good technological properties with the prospective to be used at industrial level.     

Effect of riboflavin‐producing bacteria against chemically induced colitis in mice

Aim

To assess the anti‐inflammatory effect associated with individual probiotic suspensions of riboflavin‐producing lactic acid bacteria (LAB) in a colitis murine model.

Methods and Results

Mice intrarectally inoculated with trinitrobenzene sulfonic acid (TNBS) were orally administered with individual suspensions of riboflavin‐producing strains: Lactobacillus (Lact.) plantarum CRL2130, Lact. paracasei CRL76, Lact. bulgaricus CRL871 and Streptococcus thermophilus CRL803; and a nonriboflavin‐producing strain or commercial riboflavin. The extent of colonic damage and inflammation and microbial translocation to liver were evaluated. iNOs enzyme was analysed in the intestinal tissues and cytokine concentrations in the intestinal fluids. Animals given either one of the four riboflavin‐producing strains showed lower macroscopic and histologic damage scores, lower microbial translocation to liver, significant decreases of iNOs+ cells in their large intestines and decreased proinflammatory cytokines, compared with mice without treatment. The administration of pure riboflavin showed similar benefits. Lact. paracasei CRL76 accompanied its anti‐inflammatory effect with increased IL‐10 levels demonstrating other beneficial properties in addition to the vitamin production.

Conclusion

Administration of riboflavin‐producing strains prevented the intestinal damage induced by TNBS in mice.

Significance and Impact of the Study

Riboflavin‐producing phenotype in LAB represents a potent tool to select them for preventing/treating IBD.     

A combination of direct viable count and fluorescence in situ hybridization for specific enumeration of viable Lactobacillus delbrueckii subsp.bulgaricus and Streptococcus thermophilus

Aims: We have developed a direct viable count (DVC)‐FISH procedure for quickly and easily discriminating between viable and nonviable cells of Lactobacillus delbrueckii subsp. bulgaricus and Streptococcus thermophilus strains, the traditional yogurt bacteria. Methods and Results: direct viable count method has been modified and adapted for Lact. delbrueckii subsp. bulgaricus and Strep. thermophilus analysis by testing different times of incubation and concentrations of DNA‐gyrase inhibitors. DVC procedure has been combined with fluorescent in situ hybridization (FISH) for the specific detection of viable cells of both bacteria with specific rRNA oligonucleotide probes (DVC‐FISH). Of the four antibiotics tested (novobiocin, nalidixic acid, pipemidic acid and ciprofloxacin), novobiocin was the most effective for DVC method and the optimum incubation time was 7 h for both bacteria. The number of viable cells was obtained by the enumeration of specific hybridized cells that were elongated at least twice their original length for Lactobacillus and twice their original size for Streptococcus. Conclusions: This technique was successfully applied to detect viable cells in inoculated faeces. Significance and Impact of the Study: Results showed that this DVC‐FISH procedure is a quick and culture‐independent useful method to specifically detect viable Lact. delbrueckii subsp. bulgaricus and Strep. thermophilus in different samples, being applied for the first time to lactic acid bacteria.     

Structural Similarity and Genetic Homology between Lactobacillus casei Bacteriophages Isolated in Japan and in Finland

Three Lactobacillus casei bacteriophages, LC-Nu, PL-1, and ?FSW, were compared. Phage LC-Nu, which has not been previously characterized, originated from a local cheese plant in Finland. Phages PL-1 and ?FSW (isolated in Japan) represent the most thoroughly studied L.casei phages so far. All three phages had similar morphotypes, but still had different patterns of structural proteins, as analyzed by SDS-PAGE. The phages differed also in types of genome organization: LC-Nu and PL-1 had cohesive ends in their DNAs, and the DNA of ?FSW was circularly permuted. The initiation site and orientation of packaging of ?FSW DNA were identified. The homologies between the phage genomes were analyzed by Southern hybridization. About one-third of each phage gem me was highly homologous with other phages (homology over 85%), and two-thirds were slightly homologous (homology between 65% and 76%). DNAs from five industrial L. casei strains were also tested for homology with phage LC-Nu DNA. Phage LC-Nu related sequences were present in all the L. casei strains tested.     

Lytic bacteriophages ofStreptococcus mutans

Three phages ofStreptococcus mutans were obtained and partially characterized. The three phages, designated M102, e10, and f1, were found to be strictly lytic, with host ranges restricted to only serotype c, e, and f strains of this species, respectively. Phage sensitivity was not correlated with the presence of plasmids, at least in host strains of serotypes c and e. Each phage produced clear plaques in a number of standard media, even in the presence of sucrose, indicating that the extracellular glucan polysaccharides (mutan) produced by the hosts from this substrate do not prevent phage adsorption and growth. The phages were similar in size and morphology, having icosahedral heads and long (283–287 nm), flexible, noncontractile tails. The genome of each phage was found to consist of linear, double-stranded DNA, 31–35 kb in length, with a base composition of 37–38% G+C. Restricting phage DNAs with four enzymes produced fragment patterns unique to each phage, but common bands between M102 and e10 and between e10 and f1 were produced byBamHI. Labeled e10 and M102 DNAs hybridized strongly with all three phage DNAs, indicating that they share some common sequences. The three phages appear to be more similar than expected and probably evolved from a common ancestor.     

Phages of Pseudomonas aeruginosa: response to environmental factors and in vitro ability to inhibit bacterial growth and biofilm formation

Aims: To examine effects of various environmental factors on adsorption and inactivation of Pseudomonas aeruginosa‐specific phages: δ (family Podoviridae), J‐1, σ‐1 and 001A (family Siphoviridae) and their ability to inhibit bacterial growth and biofilm formation. Methods and Results: The phages examined in the study were clonally different, as revealed by RFLP. The temperature in the range 7–44°C had no influence on the adsorption of Podoviridae, but did affect Siphoviridae adsorption, particularly 001A. All phages were significantly stable at pH 5–9, and phages δ and 001A even at pH 3. Most of the examined carbohydrates and exopolysaccharides of the original host efficiently inactivated phage δ, while phages σ‐1 and J‐1 were inactivated considerably only by the amino acid alanine. Silver nitrate efficiently inactivated all the phages, while Siphoviridae were more resistant to povidone‐iodine. Serum of nonimmunized rats had no influence on phage inactivation and adsorption. Only phage δ showed ability to effectively inhibit in vitro bacterial growth and biofilm formation. Conclusions: The examined environmental parameters can significantly influence the adsorption and viability of Ps. aeruginosa‐specific phages. The phage δ is a good candidate for biocontrol of Ps. aeruginosa. Significance and Impact of the Study: The study provides important data on Ps. aeruginosa‐specific phage adsorption, inactivation and in vitro lytic efficacy.     

Effect of exopolysaccharides on phage-host interactions in Lactococcus lactis

In this study, we report that Lactococcus lactis strains producing exopolysaccharides (EPS) are sensitive to virulent phages. Eight distinct lytic phages (Q61 to Q68) specifically infecting Eps(+) strains were isolated in 47 buttermilk samples obtained from 13 North American factories. The eight phages were classified within the 936 species by the multiplex PCR method, indicating that these phages are not fundamentally distinct from those infecting Eps(-) L. lactis strains. The host range of these phages was determined with 19 Lactococcus strains, including 7 Eps(+) and 12 Eps(-) cultures. Three phages (Q62, Q63, and Q64) attacked only the Eps(+) strain SMQ-419, whereas the five other phages (Q61, Q65, Q66, Q67, and Q68) infected only the Eps(+) strain SMQ-420. The five other Eps(+) strains (H414, MLT2, MLT3, SMQ-461, and SMQ-575) as well as the 12 Eps(-) strains were insensitive to these phages. The monosaccharide composition of the polymer produced by the seven Eps(+) strains was determined. The EPS produced by strains MLT3, SMQ-419, and SMQ-575 contained glucose, galactose, and rhamnose. The EPS fabricated by H414 contained only galactose. The EPS made by MLT2, SMQ-420, and SMQ-461 contained glucose and galactose. These findings indicate that the sugar composition of the EPS has no effect on phage sensitivity. The plasmid encoding the eps operon was cured from the two phage-sensitive strains. The cured derivatives were still phage sensitive, which indicates that EPS are not necessary for phage infection. Phage adsorption assays showed that the production of EPS does not confer a significant phage resistance phenotype.     

Exopolysaccharide production by Lactobacillus delbruckii subsp. bulgaricus and Streptococcus thermophilus strains under different growth conditions

Summary The optimal temperature, pH and incubation time for production of exopolysaccharide (EPS) by Lactobacillus delbruckii subsp. bulgaricus and Streptococcus thermophilus strains in MRS and M17 media, respectively, were determined. In all strains, the temperature and incubation time for EPS production were 45 °C and 18 h, respectively. At 45 °C, L. delbruckiisubsp. bulgaricus B3 and G12 and S. thermophilus W22 strains produced 263, 238 and 127 mg/l, respectively. At 18 h, B3, G12 and W22 strains produced 220, 152 and 120 mg/l, respectively. While the pH for highest EPS production by L. delbruckii subsp. bulgaricus strains was 6.2 (in B3 strain: 211 mg/l, in G12 strain: 175 mg/l), for highest EPS production byS. thermophilus strain it was 6.8 (114 mg/l).     

Gene cluster for biosynthesis of thermophilin 1277--a lantibiotic produced by Streptococcus thermophilus SBT1277, and heterologous expression of TepI, a novel immunity peptide

Aims: To identify genes cluster for thermophilin 1277 produced by Streptococcus thermophilus SBT1277. Methods and Results: To identify genes for thermophilin 1277 production, the chromosomal DNA region surrounding the structural gene, tepA, was sequenced using a primer‐walking method. The thermophilin 1277 biosynthesis gene locus (tep) is a 9·9‐kb region, which consists of at least ten open reading frames (ORFs) in the following order: tepAMTFEGKRI and ORF4. Homology analysis showed high similarity to genes involved in bovicin HJ50 production by Streptococcus bovis HJ50. tepI encodes a novel, small, positively charged hydrophobic peptide of 52 amino acids, which contains a putative transmembrane segment. By heterologous expression in Lactococcus lactis ssp. cremoris MG1363, the TepI‐expressing strain exhibited at least 1·3 times higher resistance to thermophilin 1277. Conclusions: Thermophilin 1277 biosynthesis genes were encoded by a 9·9‐kbp region containing at least ten ORFs. TepI is a novel immunity peptide, which protected Strep. thermophilus SBT1277 against thermophilin 1277 in addition to TepFEG, a putative ABC transporter. Significance and Impact of the Study: This is the first report regarding a lantibiotic gene cluster produced by Strep. thermophilus strain.