A thermophilic and acid stable family-10 xylanase from the acidophilic fungus Bispora sp. MEY-1

A complete gene, xyl10C, encoding a thermophilic endo-1,4-β-xylanase (XYL10C), was cloned from the acidophilic fungus Bispora sp. MEY-1 and expressed in Pichia pastoris. XYL10C shares highest nucleotide and amino acid sequence identities of 57.3 and 49.7%, respectively, with a putative xylanase from Aspergillus fumigatus Af293 of glycoside hydrolase family 10. A high expression level in P. pastoris (73,400 U ml⁻¹) was achieved in a 3.7–l fermenter. The purified recombinant XYL10C was thermophilic, exhibiting maximum activity at 85°C, which is higher than that reported from any fungal xylanase. The enzyme was also highly thermostable, exhibiting ~100% of the initial activity after incubation at 80°C for 60 min and >87% of activity at 90°C for 10 min. The half lives of XYL10C at 80 and 85°C were approximately 45 and 3 h, respectively. It had two activity peaks at pH 3.0 and 4.5–5.0 (maximum), respectively, and was very acid stable, retaining more than 80% activity after incubation at pH 1.5−6.0 for 1 h. The enzyme was resistant to Co²⁺, Mn²⁺, Cr³⁺ and Ag⁺. The specific activity of XYL10C for oat spelt xylan was 18,831 U mg⁻¹. It also had wide substrate specificity and produced simple products (65.1% xylose, 25.0% xylobiose and 9.9% xylan polymer) from oat spelt xylan.     

Molecular cloning and characterization of the novel acidic xylanase XYLD from Bispora sp. MEY-1 that is homologous to family 30 glycosyl hydrolases

We cloned and sequenced a xylanase gene named xylD from the acidophilic fungus Bispora sp. MEY-1 and expressed the gene in Pichia pastoris. The 1,422-bp full-length complementary DNA fragment encoded a 457-amino acid xylanase with a calculated molecular mass of 49.8 kDa. The mature protein of XYLD showed high sequence similarity to both glycosyl hydrolase (GH) families 5 and 30 but was more homologous to members of GH 30 based on phylogenetic analysis. XYLD shared the highest identity (49.9%) with a putative endo-1,6-β-d-glucanase from Talaromyces stipitatus and exhibited 21.1% identity and 34.3% similarity to the well-characterized GH family 5 xylanase from Erwinia chrysanthemi. Purified recombinant XYLD showed maximal activity at pH 3.0 and 60 °C, maintained more than 60% of maximal activity when assayed at pH 1.5–4.0, and had good thermal stability at 60 °C and remained stable at pH 1.0–6.0. The enzyme activity was enhanced in the presence of Ni²⁺ and β-mercaptoethanol and inhibited by some metal irons (Hg²⁺, Cu²⁺, Pb²⁺, Mn²⁺, Li⁺, and Fe³⁺) and sodium dodecyl sulfate. The specific activity of XYLD for beechwood xylan, birchwood xylan, 4-O-methyl-d-glucuronoxylan, and oat spelt xylan was 2,463, 2,144, 2,020, and 1,429 U mg⁻¹, respectively. The apparent K _m and V _max values for beechwood xylan were 5.6 mg ml⁻¹ and 3,622 μmol min⁻¹ mg⁻¹, respectively. The hydrolysis products of different xylans were mainly xylose and xylobiose.     

Identification and characterization of a novel xylanase derived from a rice straw degrading enrichment culture

A metagenomic library containing ca. 3.06 × 10⁸ bp insert DNA was constructed from a rice straw degrading enrichment culture. A xylanase gene, umxyn10A, was cloned by screening the library for xylanase activity. The encoded enzyme Umxyn10A showed 58% identity and 73% similarity with a xylanase from Thermobifida fusca YX. Sequence analyses showed that Umxyn10A contained a glycosyl hydrolase family 10 catalytic domain. The gene was expressed in Escherichia coli, and the recombinant enzyme was purified and characterized biochemically. Recombinant Umxyn10A was highly active toward xylan. However, the purified enzyme could slightly hydrolyze β-1,3/4-glucan and β-1,3/6-glucan. Umxyn10A displayed maximal activity toward oat spelt xylan at a high temperature (75°C) and weak acidity (pH 6.5). The K _m and V _max of Umxyn10A toward oat spelt xylan were 3.2 mg ml⁻¹ and 0.22 mmol min⁻¹ mg⁻¹ and were 2.7 mg ml⁻¹ and 1.0 mmol min⁻¹ mg⁻¹ against birchwood xylan, respectively. Metal ions did not appear to be required for the catalytic activity of this enzyme. The enzyme Umxyn10A could efficiently hydrolyze birchwood xylan to release xylobiose as the major product and a negligible amount of xylose. The xylanase identified in this work may have potential application in producing xylobiose from xylan.     

Purification and characterization of a high-thermostable β-xylanase from newly isolated Thermomyces lanuginosus THKU-49

Highly thermostable β-xylanase produced by newly isolated Thermomyces lanuginosus THKU-49 strain was purified in a four-step procedure involving ammonium sulfate precipitation and subsequent separation on a DEAE-Sepharose fast flow column, hydroxylapatite column, and Sephadex G-100 column, respectively. The enzyme purified to homogeneity had a specific activity of 552 U/mg protein and a molecular weight of 24.9 kDa. The optimal temperature of the purified xylanase was 70°C, and it was stable at temperatures up to 60°C at pH 6.0; the optimal pH was 5.0–7.0, and it was stable in the pH range 3.5–8.0 at 4°C. Xylanase activity was inhibited by Mn²⁺, Sn²⁺, and ethylenediaminetetraacetic acid. The xylanase showed a high activity towards soluble oat spelt xylan, but it exhibited low activity towards insoluble oat spelt xylan; no activity was found to carboxymethylcellulose, avicel, filter paper, locust bean gum, cassava starch, and p-nitrophenyl β-d-xylopyranoside. The apparent K _m value of the xylanase on soluble oat spelt xylan and insoluble oat spelt xylan was 7.3 ± 0.236 and 60.2 ± 6.788 mg/ml, respectively. Thin-layer chromatography analysis showed that the xylanase hydrolyzed oat spelt xylan to yield mainly xylobiose and xylose as end products, but that it could not release xylose from the substrate xylobiose, suggesting that it is an endo-xylanase.     

Enrichment of new alkane oxidizing bacterial strains for human drug metabolite production

An extracellular xylanase produced by Streptomyces matensis DW67 was purified from the culture supernatant by ammonium sulfate precipitation, ion exchange and gel filtration chromatography and characterized. The xylanase was purified to 14.5-fold to homogeneity with a recovery yield of 14.1%. The purified xylanase appeared as a single protein band on SDS-PAGE with a molecular mass of 21.2 kDa. However, it had a very low apparent molecular mass of 3.3 kDa as determined by gel filtration chromatography. The N-terminal sequence of first 15 amino acid residues was determined as ATTITTNQTGYDGMY. The optimal temperature and pH for purified xylanase was 65 °C and pH 7.0, respectively. The enzyme was stable within the pH range of 4.5–8.0 and was up to 55 °C. The xylanase showed specific activity towards different xylans and no activity towards other substrates tested. Hydrolysis of birchwood xylan by the xylanase yielded xylobiose and xylotriose as principal products. The enzyme hardly hydrolyzed xylobiose and xylotriose, but it could hydrolyze xylotetraose and xylopentaose to produce mainly xylobiose and xylotriose through transglycosylation. These unique properties of the purified xylanase make this enzyme attractive for biotechnological applications, such as bioblenching in paper and pulp industries, production of xylooligosaccharides. This is the first report of the xylanase from S. matensis.     

Purification and characterization of a new xylanase (xylanase C) produced by Streptomyces lividans 66

Summary A third extracellular xylanase produced by Streptomyces lividans 66 was isolated from a clone obtained by shotgun cloning through functional complementation of a xylanase- and cellulase-negative mutant using the multicopy vector pIJ702. This enzyme, designated xylanase C, has a relative molecular mass of 22000 and acts on xylan similarly to xylanase B as an endo-type xylanase producing short-chain oligoxylosides. Its specific activity determined at 1100 IU·mg^–1 of protein corresponds on a molecular basis to that of xylanase B and is about three times that of xylanase A. The enzyme shows optimal activity at pH 6.0 and 57°C, values that correspond closely to those observed previously for xylanase A and B. Xylanase C appears not to be glycosylated and has a pI > 10.25. Its K _m and V _max on birchwood xylan are 4.1 mg·ml^–1 and 3.0 mol·min^–1·mg^–1 of enzyme respectively. Whereas specific antibodies raised against xylanase A show no cross-reaction with either xylanase B or with xylanase C, the anti-(xylanase C) antibodies react slightly with xylanase B but not with xylanase A. A comparison of hydrolysis products obtained by reacting individually the three enzymes with birchwood xylan showed characteristic endo-activity patterns for xylanases B and C, whereas xylanase A hydrolysed the substrate preferentially into xylobiose and xylotriose. Sequential xylanase action on the same substrates showed synergistic hydrolysis only when endo-xylanase activity was followed by that of xylanase A.     

Production, Purification, and Characterization of β-(1-4)-Endoxylanase of Streptomyces roseiscleroticus

Twelve species of Streptomyces that formerly belonged to the genus Chainia were screened for the production of xylanase and cellulase. One species, Streptomyces roseiscleroticus (Chainia rosea) NRRL B-11019, produced up to 16.2 IU of xylanase per ml in 48 h. A xylanase from S. roseiscleroticus was purified and characterized. The enzyme was a debranching β-(1-4)-endoxylanase showing high activity on xylan but essentially no activity against acid-swollen (Walseth) cellulose. It had a very low apparent molecular weight of 5,500 by native gel filtration, but its denatured molecular weight was 22,600 by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. It had an isoelectric point of 9.5. The pH and temperature optima for hydrolysis of arabinoxylan were 6.5 to 7.0 and 60°C, respectively, and more than 75% of the optimum enzyme activity was retained at pH 8.0. The xylanase had a K_m of 7.9 mg/ml and an apparent V_max of 305 μmol · min^-1 · mg of protein^-1. The hydrolysis rate was linear for xylan concentrations of less than 4 mg/ml, but significant inhibition was observed at xylan concentrations of more than 10 mg/ml. The predominant products of arabinoxylan hydrolysis included arabinose, xylobiose, and xylotriose.     

Cloning,purification and characterization of an alkali-stable endoxylanase from thermophilic <Emphasis Type="Italic">Geobacillus</Emphasis> sp. 71

The gene encoding a xylanase from Geobacillus sp. 71 was isolated, cloned, and sequenced. Purification of the Geobacillus sp 7.1 xylanase, XyzGeo71, following overexpression in E. coli produced an enzyme of 47 kDa with an optimum temperature of 75°C. The optimum pH of the enzyme is 8.0, but it is active over a broad pH range. This protein showed the highest sequence identity (93%) with the xylanase from Geobacillus thermodenitrificans NG80-2. XyzGeo71 contains a catalytic domain that belongs to the glycoside hydrolase family 10 (GH10). XyzGeo71 exhibited good pH stability, remaining stable after treatment with buffers ranging from pH 7.0 to 11.0 for 6 h. Its activity was partially inhibited by Al³⁺ and Cu²⁺ but strongly inhibited by Hg²⁺. The enzyme follows Michaelis–Menten kinetics, with K_m and V_max values of 0.425 mg xylan/ml and 500 μmol/min.mg, respectively. The enzyme was free from cellulase activity and degraded xylan in an endo fashion. The action of the enzyme on oat spelt xylan produced xylobiose and xylotetrose.     

Recombinant xylanase from Streptomyces coelicolor Ac-738: characterization and the effect on xylan-containing products

A xylanase gene was isolated from the genomic DNA of Streptomyces coelicolor Ac-738. The 723-bp full-length gene encoded a 241-amino acid peptide consisting of a 49-residue putative TAT signal peptide and a glycoside hydrolase family-11 domain. The mature enzyme called XSC738 was expressed in Escherichia coli M15[pREP4]. The electrophoretically homogeneous protein with a specific activity of 167 U/mg for beechwood xylan was purified. The pH optimum of XSC738 was at pH 6; a high activity was retained within a pH range of 4.5–8.5. The enzyme was thermostable at 50–60 °C and retained an activity at pH 3.0–7.0. Xylanase XSC738 was activated by Mn²⁺, Co²⁺ and largely inhibited by Cd²⁺, SDS and EDTA. The products of xylan hydrolysis were mainly xylobiose, xylotriose, xylopentaose and xylohexose. Xylotetraose appeared as a minor product. Processing of such agricultural xylan-containing products as wheat, oats, soy flour and wheat bran by xylanase resulted in an increased content of sugars.     

Purification and characterization of a thermophilic alkaline xylanase from thermoalkaliphilic Bacillus sp. strain TAR-1

Thermoalkaliphilic Bacillus sp. strain TAR-1 isolated from soil produced an extracellular xylanase. The enzyme (xylanase R) was purified to homogeneity by ammonium sulfate fractionation and anion-exchange chromatography. The molecular mass of xylanase R was 40 kDa and the isoelectric point was 4.1. The enzyme was most active over the range of pH 5.0 to 10.0 at 50°C. The optimum temperatures for activity were 75°C at pH 7.0 and 70°C at pH 9.0. Xylanase R was stable up to 65°C at pH 9.0 for 30 min in the presence of xylan. Mercury(ll) ion at 1 mM concentration abolished all the xylanase activity. The predominant products of xylan-hydrolysate were xylobiose, xylotriose, and higher oligosaccharides, indicating that xylanase R was an endo-acting enzyme. Xylanase R had a K_m of 0.82 mg/ml and a V_max of 280 μmol min⁻¹ mg⁻¹ for xylan at 50°C and pH 9.0.     

Characterization of a New α-<Emphasis Type="SmallCaps">l</Emphasis>-Arabinofuranosidase from <Emphasis Type="Italic">Penicillium</Emphasis> sp. LYG 0704, and their Application in Lignocelluloses Degradation

A gene (arf) encoding an α-l-arabinofuranosidase (ARF) that hydrolyzes arabinose substituted on xylan was isolated from Penicillium sp. The gene was predicted to encode 339 amino acid residues showing 71–75% homology to GH family 54. E. coli expressed ARF showed optimal activity at 50°C and pH 5–6 on wheat arabinoxylan. The hydrolysis activities on oat spelt xylan by ARF and xylanase were 1.67-fold higher than that of xylanase alone. The synergistic effects of ARF and commercial enzymes (xylanase and cellulase) on popping-pretreated rice straw were 1.15–1.51-fold higher amounts of sugars released in the [ARF + xylanase + cellulase] mixture than in the mixtures [ARF + xylanase], [ARF + cellulase], and [xylanase + cellulase]. Moreover, the liberation of arabinose by ARF was enhanced 2.1–2.9-fold in a reaction with xylanase and cellulase as compared with [xylanase + cellulase] and ARF alone.     

Optimization of fermentation conditions for production of xylanase by a newly isolated strain,Penicillium thiersii ZH-19

The objective of this study was to maximize production of xylanase by a newly isolated strain Penicillium thiersii ZH-19. Response surface methodology was employed to study the effects of significant factors such as pH, temperature, xylan concentration, and cultivation time, on the production of xylanase by Penicillium thiersii ZH-19. The optimal fermentation parameters for enhanced xylanase production were found to be pH 7.72, temperature 24.8°C, xylan 13.2 g l⁻¹ and the fermentation time 125.8 h. The model predicted a xylanase activity of 75.24 U ml⁻¹. Verification of the optimization showed that the maximum xylanase production reached 73.50 U mL⁻¹ in the flask experiments and 80.23 U mL⁻¹ in the scale of 15-L fermenter under the optimal condition.     

A novel xylanase,XynA4-2, from thermoacidophilic <Emphasis Type="Italic">Alicyclobacillus</Emphasis> sp. A4 with potential applications in the brewing industry

A xylanase gene, xynA4-2, was obtained from the genome sequence of thermoacidophilic Alicyclobacillus sp. A4 and expressed in Escherichia coli BL21 (DE3). xynA4-2 encodes a mature protein of 411 residues with a calculated molecular weight of 46.8 kDa. Based on the amino acid sequence similarities (highest identity of 61%), the enzyme was confined into glycoside hydrolase family 10. The purified recombinant XynA4-2 exhibited maximum activity at pH 6.2 and 55°C. The enzyme was stable over a broad pH range, retaining more than 90% of the original activity at pH 5.8–12.0, 37°C for 1 h. The substrate specificity of XynA4-2 was relatively narrow, exhibiting 100, 93, and 35% of the relative activity towards birchwood xylan, oat spelt xylan, and wheat arabinoxylan, respectively. Supplementation of XynA4-2 to mash caused the reduction of mash filtration rate (5.6%) and viscosity (4.0%). When combined with the commercial glucanase from Sunson, higher reduction was detected in the filtration rate (12.0%) and viscosity (17.2%). These favorable properties make XynA4-2 a good candidate in the brewing industry.     

Production of alkaliphilic, halotolerent, thermostable cellulase free xylanase by Bacillus halodurans PPKS-2 using agro waste: single step purification and characterization

The alkaliphilic Bacillus halodurans strain PPKS-2 was shown to produce extracellular alkaliphilic, thermostable and halotolerent xylanase. The culture conditions for xylanase production were optimized with respect to pH, temperature, NaCl and inexpensive agro waste as substrates. Xylanase yield was enhanced more than four fold in the presence of 1% corn husk and 0.5% peptone or feather hydrolysate at pH 11 and 37°C. Xylanase was purified to 11.8-fold with 8.7% yield by using traditional chromatographic methods whereas the same enzyme purified to 20-fold with 72% yield by using corn husk as ligand. Its molecular mass was estimated to be 24 kDa by SDS–PAGE. The xylanase had maximal activity at pH 11 and 70°C. The enzyme was active over broad range, 0–20% sodium chloride. The enzyme was thermostable retaining 100% of the original activity at 70°C for 3 h. The apparent K _m values for oat spelt xylan and brichwood xylan were 4.1 and 4.4 mg/ml respectively. The deduced internal amino acid sequence of PPKS-2 xylanase resembled the sequence of β-1,4-endoxylanase, which is member of glycoside hydrolase family 11.     

Cloning,expression and characterization of a novel acidic xylanase,XYL11B,from the acidophilic fungus Bispora sp. MEY-1

A xylanase gene (xyl11B) was cloned from Bispora sp. MEY-1 and expressed in Pichia pastoris. xyl11B, with a 66-bp intron, encodes a mature protein of 219 residues with highest identity (57.1%) to the Trichoderma reesei xylanase of glycoside hydrolase family 11. The purified recombinant XYL11B was acidophilic, exhibiting maximum activity at pH 2.6 and 65 °C. The enzyme was also thermostable, pH stable, and was highly resistant to both pepsin and trypsin, suggesting good performance in the digestive tract as a feed supplement to improve animal nutrition. The activity of XYL11B was enhanced by most metal ions but was inhibited weakly by Hg²⁺, Pb²⁺and Cu²⁺, which strongly inhibit many other xylanases. The specific activity of XYL11B for oat spelt xylan substrate was 2049 U mg^?1. The main hydrolysis products of xylan were xylose and xylobiose.     

Heterologous expression of a gene for thermostable xylanase from <Emphasis Type="Italic">Chaetomium</Emphasis> <Emphasis Type="Italic">thermophilum</Emphasis> in <Emphasis Type="Italic">Pichia</Emphasis> <Emphasis Type="Italic">pastoris</Emphasis> GS115

We studied heterologous expression of xylanase 11A gene of Chaetomium thermophilum in Pichia pastoris and characterized the thermostable nature of the purified gene product. For this purpose, the xylanase 11A gene of C. thermophilum was cloned in P. pastoris GS115 under the control of AOX1 promoter. The maximum extracellular activity of recombinant xylanase (xyn698: gene with intron) was 15.6 U ml⁻¹ while that of recombinant without intron (xyn669) was 1.26 U ml⁻¹ after 96 h growth. The gene product was purified apparently to homogeneity level. The optimum temperature of pure recombinant xylanase activity was 70°C and the enzyme retained its 40.57% activity after incubation at 80°C for 10 min. It exhibited quite lower demand of activation energy, enthalpy, Gibbs free energy, entropy, and xylan binding energy during substrate hydrolysis than that required by that of the donor, thus indicating its thermostable nature. pH-dependent catalysis showed that it was quite stable in a pH range of 5.5–8.5. This revealed that gene was successfully processed in P. pastoris and remained heat stable and may qualify for its potential use in paper and pulp and animal feed applications.     

Purification and characterization studies of a thermostable β-xylanase from <Emphasis Type="Italic">Aspergillus awamori</Emphasis>

This study presents data on the production, purification, and properties of a thermostable β-xylanase produced by an Aspergillus awamori 2B.361 U2/1 submerged culture using wheat bran as carbon source. Fractionation of the culture filtrate by membrane ultrafiltration followed by Sephacryl S-200 and Q-Sepharose chromatography allowed for the isolation of a homogeneous xylanase (PXII-1), which was 32.87 kDa according to MS analysis. The enzyme-specific activity towards soluble oat spelt xylan, which was found to be 490 IU/mg under optimum reaction conditions (50°C and pH 5.0–5.5), was 17-fold higher than that measured in the culture supernatant. Xylan reaction products were identified as xylobiose, xylotriose, and xylotetraose. K _m values (mg ml⁻¹) for soluble oat spelt and birchwood xylan were 11.8 and 9.45, respectively. Although PXII-1 showed 85% activity retention upon incubation at 50°C and pH 5.0 for 20 days, incubation at pH 7.0 resulted in 50% activity loss within 3 days. PXII-1 stability at pH 7.0 was improved in the presence of 20 mM cysteine, which allowed for 85% activity retention for 25 days. This study on the production in high yields of a remarkably thermostable xylanase is of significance due to the central role that this class of biocatalyst shares, along with cellulases, for the much needed enzymatic hydrolysis of biomass. Furthermore, stable xylanases are important for the manufacture of paper, animal feed, and xylooligosaccharides.     

Characterization of a thermostable xylanase from an alkaliphilic Bacillus sp.

A xylanase gene (xyn10) from alkaliphilic Bacillus sp. N16-5 was cloned and expressed in Pichia pastoris. The deduced amino acid sequence has 85% identity with xylanase xyn10A from B. halodurans and contains two potential N-glycosylation sites. The glycosylated Xyn10 with MW 48 kDa can hydrolyze birchwood and oatspelt xylan. The enzyme had optimum activity at pH 7 and 70°C, with the specific activity of 92.5U/mg. The Xyn10 retained over 90% residual activity at 60°C for 30 min but lost all activity at 80°C over 15 min. Most tested ions showed no or slight inhibition effects on enzyme activity.     

A new xylanase from thermoacidophilic Alicyclobacillus sp. A4 with broad-range pH activity and pH stability

We have identified a highly pH-adaptable and stable xylanase (XynA4) from the thermoacidophilic Alicyclobacillus sp. A4, a strain that was isolated from a hot spring in Yunnan Province, China. The gene (xynA4) that encodes this xylanase was cloned, sequenced, and expressed in Escherichia coli. It encodes a 338-residue polypeptide with a calculated molecular mass of 42.5 kDa. The deduced amino acid sequence is most similar to (53% identity) an endo-1,4-β-xylanase from Geobacillus stearothermophilus that belongs to family 10 of the glycoside hydrolases. Purified recombinant XynA4 exhibited maximum activity at 55°C and pH 7.0, had broad pH adaptability (>40% activity at pH 3.8–9.4) and stability (retaining >80% activity after incubation at pH 2.6–12.0 for 1 h at 37°C), and was highly thermostable (retaining >90% activity after incubation at 60°C for 1 h at pH 7.0). These properties make XynA4 promising for application in the paper industry. This is the first report that describes cloning and expression of a xylanase gene from the genus Alicyclobacillus.     

Purification and characterization of low molecular weight alkali stable xylanase from Neosartorya spinosa UZ-2-11

Alkaliphilic xylanase from Neosartorya spinosa UZ-2-11 was purified using a three-step of purification scheme of ammonium sulphate precipitation followed by Sephadex G-100 gel filtration and DEAE-cellulose ion-exchange chromatography, and compared its properties with N. tatenoi KKU-CLB-3-2-4-1 of our previous report. The purified xylanase from N. spinosa UZ-2-11 exhibited maximum activity at pH 9.0 and 45 °C which was similar to endo-xylanase from N. tatenoi KKU-CLB-3-2-4-1. However, this enzyme was stable in a range of pH 6.0–11.0. It was also more stable at a high temperature of 50 °C where the activity was still up to 50% after heating for 120 min. The xylanase was purified 7.89-fold with 3.0% of yield to obtain a specific activity of 11.88 U/mg. The molecular weight of xylanase from this fungus was 27.68 kDa. The K_m and V_max values of the purified xylanase were 0.24 mg/mL and 15.85 μmol/min/mg, respectively. The xylanase activity was moderately inhibited by Hg²⁺ at a concentration of 10 mM, which was different to the case of N. tatenoi KKU-CLB-3-2-4-1 where Hg²⁺ was a strong inhibitor. In addition, the hydrolysed birchwood xylan was obtained mailnly xylobiose, xylotriose, xylotetraose and xylopentaose as end products, suggesting that it was an endo-xylanase.