The two copies of the zinc and cadmium ZIP6 transporter of Arabidopsis halleri have distinct effects on cadmium tolerance

Plants have the ability to colonize highly diverse environments. The zinc and cadmium hyperaccumulator Arabidopsis halleri has adapted to establish populations on soils covering an extreme range of metal availabilities. The A. halleri ZIP6 gene presents several hallmarks of hyperaccumulation candidate genes: it is constitutively highly expressed in roots and shoots and is associated with a zinc accumulation quantitative trait locus. Here, we show that AhZIP6 is duplicated in the A. halleri genome. The two copies are expressed mainly in the vasculature in both A. halleri and Arabidopsis thaliana, indicative of conserved cis regulation, and acquired partial organ specialization. Yeast complementation assays determined that AhZIP6 is a zinc and cadmium transporter. AhZIP6 silencing in A. halleri or expression in A. thaliana alters cadmium tolerance, but has no impact on zinc and cadmium accumulation. AhZIP6-silenced plants display reduced cadmium uptake upon short-term exposure, adding AhZIP6 to the limited number of Cd transporters supported by in planta evidence. Altogether, our data suggest that AhZIP6 is key to fine-tune metal homeostasis in specific cell types. This study additionally highlights the distinct fates of duplicated genes in A. halleri.     

Ontogenetics of QTL: the genetic architecture of trichome density over time in Arabidopsis thaliana

Although much is known about the molecular genetic basis of trichome development in Arabidopsis thaliana, less is known about the underlying genetic basis of continuous variation in a trait known to be of adaptive importance: trichome density. The density of leaf trichomes is known to be a major determinant of herbivore damage in natural populations of A. thaliana and herbivores are a significant selective force on genetic variation for trichome density. A number of developmental changes occur during ontogeny in A. thaliana, including changes in trichome density. I used multiple interval mapping (MIM) analysis to identify QTL responsible for trichome density on both juvenile leaves and adult leaves in replicate, independent trials and asked whether those QTL changed with ontogeny. In both juvenile and adult leaves, I detected a single major QTL on chromosome 2 that explained much of the genetic variance. Although additional QTL were detected, there were no consistent differences in the genetic architecture of trichome density measured on juvenile and adult leaves. The finding of a single QTL of major effect for a trait of known adaptive importance suggests that genes of major effect may play an important role in adaptation.     

Genetic basis of Cd tolerance and hyperaccumulation in Arabidopsis halleri

The genetic basis of Cd tolerance and hyperaccumulation was investigated in Arabidopsis halleri. The study was conducted in hydroponic culture with a backcross progeny, derived from a cross between A. halleri and a non-tolerant and non-accumulating related species Arabidopsis lyrata ssp. petraea, as well as with the parents of the backcross. The backcross progeny segregates for both cadmium (Cd) tolerance and accumulation. The results support that (i) Cd tolerance may be governed by more than one major gene, (ii) Cd tolerance and Cd accumulation are independent characters, (iii) Cd and Zn tolerances co-segregate suggesting that they are under pleiotropic genetic control, at least to a certain degree, (iv) the same result was obtained for Cd and Zn accumulation.     

Natural variation and QTL analysis for cationic mineral content in seeds of Arabidopsis thaliana

Naturally occurring genetic variation for contents of cationic minerals in seeds of Arabidopsis thaliana was studied by screening a series of accessions (ecotypes) for Ca, Fe, K, Mg, Mn, Na, Zn, and for total contents of P. Variation was observed for all minerals and correlations between contents of various minerals were present, most noticeably between Ca and Mg, P and Mg, and P and Mn. The genetic basis of this variation was further studied by QTL analysis, using the Landsberg erecta (Ler) × Cape Verde Islands (Cvi) recombinant inbred population. For all minerals, except Na, one or more QTL were detected, explaining up to 78% of the variation. The map positions of several QTL were confirmed by analysis of near isogenic lines, carrying small Cvi introgressions in Ler background. Interesting co‐locations of QTL suggest pleiotropic effects, due to physiological coupling of the accumulation of certain minerals or to linkage of different genes. By comparing the map positions of QTL with the positions of genes expected to play a role in cation translocation, several candidate genes are suggested.     

Natural Variation at the FRD3 MATE Transporter Locus Reveals Cross-Talk between Fe Homeostasis and Zn Tolerance in Arabidopsis thaliana

Zinc (Zn) is essential for the optimal growth of plants but is toxic if present in excess, so Zn homeostasis needs to be finely tuned. Understanding Zn homeostasis mechanisms in plants will help in the development of innovative approaches for the phytoremediation of Zn-contaminated sites. In this study, Zn tolerance quantitative trait loci (QTL) were identified by analyzing differences in the Bay-0 and Shahdara accessions of Arabidopsis thaliana. Fine-scale mapping showed that a variant of the Fe homeostasis-related FERRIC REDUCTASE DEFECTIVE3 (FRD3) gene, which encodes a multidrug and toxin efflux (MATE) transporter, is responsible for reduced Zn tolerance in A. thaliana. Allelic variation in FRD3 revealed which amino acids are necessary for FRD3 function. In addition, the results of allele-specific expression assays in F1 individuals provide evidence for the existence of at least one putative metal-responsive cis-regulatory element. Our results suggest that FRD3 works as a multimer and is involved in loading Zn into xylem. Cross-homeostasis between Fe and Zn therefore appears to be important for Zn tolerance in A. thaliana with FRD3 acting as an essential regulator.     

Role of seed germination in adaptation and reproductive isolation in Arabidopsis lyrata

Seed germination is an important developmental and life history stage. Yet, the evolutionary impact of germination has mainly been studied in the context of dormancy, or for its role in reproductive isolation between species. Here, we aim to examine multiple consequences of genetic divergence on germination traits between two Arabidopsis lyrata subspecies: ssp. petraea (Eurasia) and ssp. lyrata (North America). Postdormancy germination time, a potentially adaptive trait, showed differentiation between the populations, and quantitative trait loci (QTL) mapping revealed that the trait variation is mainly controlled by two antagonistic loci. These QTL areas contain several candidate genes with known function in postdormancy germination in A. thaliana. The sequence variation of three genes was consistent with differential selection, and they also included fixed nonsynonymous substitutions with potential to account for the phenotypic differentiation. We further show that the divergence between the subspecies has led to a slight but significant reduction in hybrid germination proportions, indicating incipient reproductive isolation. Comparison of reciprocal F₁ and F₂ progenies suggests that Bateson–Dobzhansky–Muller incompatibilities likely act through uniparentally inherited factors. Examination of genomewide transmission ratio distortion further revealed that cytonuclear interactions cause substantial pregermination inviability in the hybrids. These results confirm that seed germination has adaptive potential beyond the dormancy stage and that hybrid seed inviability can be one of the first reproductive barriers to arise during divergence.     

Between-species differences in gene copy number are enriched among functions critical for adaptive evolution in Arabidopsis halleri

Background

Gene copy number divergence between species is a form of genetic polymorphism that contributes significantly to both genome size and phenotypic variation. In plants, copy number expansions of single genes were implicated in cultivar- or species-specific tolerance of high levels of soil boron, aluminium or calamine-type heavy metals, respectively. Arabidopsis halleri is a zinc- and cadmium-hyperaccumulating extremophile species capable of growing on heavy-metal contaminated, toxic soils. In contrast, its non-accumulating sister species A. lyrata and the closely related reference model species A. thaliana exhibit merely basal metal tolerance.

Results

For a genome-wide assessment of the role of copy number divergence (CND) in lineage-specific environmental adaptation, we conducted cross-species array comparative genome hybridizations of three plant species and developed a global signal scaling procedure to adjust for sequence divergence. In A. halleri, transition metal homeostasis functions are enriched twofold among the genes detected as copy number expanded. Moreover, biotic stress functions including mostly disease Resistance (R) gene-related genes are enriched twofold among genes detected as copy number reduced, when compared to the abundance of these functions among all genes.

Conclusions

Our results provide genome-wide support for a link between evolutionary adaptation and CND in A. halleri as shown previously for Heavy metal ATPase4. Moreover our results support the hypothesis that elemental defences, which result from the hyperaccumulation of toxic metals, allow the reduction of classical defences against biotic stress as a trade-off.

     

Mapping of barley homologs to genes that regulate low temperature tolerance in Arabidopsis

We investigated the allelic nature and map locations of Hordeum vulgare (barley) homologs to three classes of Arabidopsis low temperature (LT) regulatory genes—CBFs, ICE1, and ZAT12—to determine if there were any candidates for winterhardiness-related quantitative trait loci (QTL). We phenotyped the Dicktoo × Morex (D×M) mapping population under controlled freezing conditions and in addition to the previously reported 5H-L Fr-H1 QTL, observed three additional LT tolerance QTLs on 1H-L, 4H-S, and 4H-L. We identified and assigned either linkage map or chromosome locations to 1 ICE1 homolog, 2 ZAT12 homologs, and 17 of 20 CBF homologs. Twelve of the CBF genes were located on 5H-L and the 11 with assigned linkage map positions formed 2 tandem clusters on 5H-L. A subset of these CBF genes was confirmed to be physically linked, validating the map position clustering. The tandem CBF clusters are not candidates for the D×M LT tolerance Fr-H1 QTL, as they are ~30 cM distal to the QTL peak. No LT tolerance QTL was detected in conjunction with the CBF gene clusters in Dicktoo × Morex. However, comparative mapping using common markers and BIN positions established the CBF clusters are coincident with reported Triticeae LT tolerance and COR gene accumulation QTLs and suggest one or more of the CBF genes may be candidates for Fr-H2 in some germplasm combinations. These results suggest members of the CBF gene family may function as components of winterhardiness in the Triticeae and underscore both the importance of extending results from model systems to economically important crop species and in viewing QTL mapping results in the context of multiple germplasm combinations. Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users.     

The genetic basis of zinc tolerance in the metallophyte Arabidopsis halleri ssp. halleri (Brassicaceae): an analysis of quantitative trait loci

The species Arabidopsis halleri, an emerging model for the study of heavy metal tolerance and accumulation in plants, has evolved a high level of constitutive zinc tolerance. Mapping of quantitative trait loci (QTL) was used to investigate the genetic architecture of zinc tolerance in this species. A first-generation backcross progeny of A. halleri ssp. halleri from a highly contaminated industrial site and its nontolerant relative A. lyrata ssp. petraea was produced and used for QTL mapping of zinc tolerance. A genetic map covering most of the A. halleri genome was constructed using 85 markers. Among these markers, 65 were anchored in A. thaliana and revealed high synteny with other Arabidopsis genomes. Three QTL of comparable magnitude on three different linkage groups were identified. At all QTL positions zinc tolerance was enhanced by A. halleri alleles, indicating directional selection for higher zinc tolerance in this species. The two-LOD support intervals associated with these QTL cover 24, 4, and 13 cM. The importance of each of these three regions is emphasized by their colocalization with HMA4, MTP1-A, and MTP1-B, respectively, three genes well known to be involved in metal homeostasis and tolerance in plants.     

Genetic mapping of EST-derived simple sequence repeats (EST-SSRs) to identify QTL for leaf morphological characters in a Quercus robur full-sib family

The availability of genomic resources such as expressed sequence tag-derived simple sequence repeat (EST-SSR) markers in adaptive genes with high transferability across related species allows the construction of genetic maps and the comparison of genome structure and quantitative trait loci (QTL) positions. In the present study, genetic linkage maps were constructed for both parents of a Quercus robur × Q. robur ssp. slavonica full-sib pedigree. A total of 182 markers (61 AFLPs, 23 nuclear SSRs, 98 EST-SSRs) and 172 markers (49 AFLPs, 21 nSSRs, 101 EST-SSRs, 1 isozyme) were mapped on the female and male linkage maps, respectively. The total map length and average marker spacing were 1,038 and 5.7 cM for the female map and 998.5 and 5.8 cM for the male map. A total of 68 nuclear SSRs and EST-SSRs segregating in both parents allowed to define homologous linkage groups (LG) between both parental maps. QTL for leaf morphological traits were mapped on all 12 LG at a chromosome-wide level and on 6 LG at a genome-wide level. The phenotypic effects explained by each single QTL ranged from 4.0 % for leaf area to 15.8 % for the number of intercalary veins. QTL clusters for leaf characters that discriminate between Q. robur and Quercus petraea were mapped reproducibly on three LG, and some putative candidate genes among potentially many others were identified on LG3 and LG5. Genetic linkage maps based on EST-SSRs can be valuable tools for the identification of genes involved in adaptive trait variation and for comparative mapping.     

Extreme QTL mapping of germination speed in Arabidopsis thaliana

Seed germination is a key life history transition for annual plants and partly determines lifetime performance and fitness. Germination speed, the elapsed time for a nondormant seed to germinate, is a poorly understood trait important for plants’ competitiveness and fitness in fluctuating environments. Germination speed varied by 30% among 18 Arabidopsis thaliana populations measured, and exhibited weak negative correlation with flowering time and seed weight, with significant genotype effect (P < 0.005). To dissect the genetic architecture of germination speed, we developed the extreme QTL (X‐QTL) mapping method in A. thaliana. The method has been shown in yeast to increase QTL mapping power by integrating selective screening and bulk‐segregant analysis in a very large mapping population. By pooled genotyping of top 5% of rapid germinants from ~100 000 F₃ individuals, three X‐QTL regions were identified on chromosomes 1, 3 and 4. All regions were confirmed as QTL regions by sequencing 192 rapid germinants from an independent F₃ selection experiment. Positional overlaps were found between X‐QTLs and previously identified seed, life history and fitness QTLs. Our method provides a rapid mapping platform in A. thaliana with potentially greater power. One can also relate identified X‐QTLs to the A. thaliana physical map, facilitating candidate gene identification.     

QTL mapping of freezing tolerance: links to fitness and adaptive trade‐offs

Local adaptation, defined as higher fitness of local vs. nonlocal genotypes, is commonly identified in reciprocal transplant experiments. Reciprocally adapted populations display fitness trade‐offs across environments, but little is known about the traits and genes underlying fitness trade‐offs in reciprocally adapted populations. We investigated the genetic basis and adaptive significance of freezing tolerance using locally adapted populations of Arabidopsis thaliana from Italy and Sweden. Previous reciprocal transplant studies of these populations indicated that subfreezing temperature is a major selective agent in Sweden. We used quantitative trait locus (QTL) mapping to identify the contribution of freezing tolerance to previously demonstrated local adaptation and genetic trade‐offs. First, we compared the genomic locations of freezing tolerance QTL to those for previously published QTL for survival in Sweden, and overall fitness in the field. Then, we estimated the contributions to survival and fitness across both field sites of genotypes at locally adaptive freezing tolerance QTL. In growth chamber studies, we found seven QTL for freezing tolerance, and the Swedish genotype increased freezing tolerance for five of these QTL. Three of these colocalized with locally adaptive survival QTL in Sweden and with trade‐off QTL for overall fitness. Two freezing tolerance QTL contribute to genetic trade‐offs across environments for both survival and overall fitness. A major regulator of freezing tolerance, CBF2, is implicated as a candidate gene for one of the trade‐off freezing tolerance QTL. Our study provides some of the first evidence of a trait and gene that mediate a fitness trade‐off in nature.     

Quantitative trait loci and candidate gene mapping of aluminum tolerance in diploid alfalfa

Aluminum (Al) toxicity in acid soils is a major limitation to the production of alfalfa (Medicago sativa subsp. sativa L.) in the USA. Developing Al-tolerant alfalfa cultivars is one approach to overcome this constraint. Accessions of wild diploid alfalfa (M. sativa subsp. coerulea) have been found to be a source of useful genes for Al tolerance. Previously, two genomic regions associated with Al tolerance were identified in this diploid species using restriction fragment length polymorphism (RFLP) markers and single marker analysis. This study was conducted to identify additional Al-tolerance quantitative trait loci (QTLs); to identify simple sequence repeat (SSR) markers that flank the previously identified QTLs; to map candidate genes associated with Al tolerance from other plant species; and to test for co-localization with mapped QTLs. A genetic linkage map was constructed using EST-SSR markers in a population of 130 BC₁F₁ plants derived from the cross between Al-sensitive and Al-tolerant genotypes. Three putative QTLs on linkage groups LG I, LG II and LG III, explaining 38, 16 and 27% of the phenotypic variation, respectively, were identified. Six candidate gene markers designed from Medicago truncatula ESTs that showed homology to known Al-tolerance genes identified in other plant species were placed on the QTL map. A marker designed from a candidate gene involved in malic acid release mapped near a marginally significant QTL (LOD 2.83) on LG I. The SSR markers flanking these QTLs will be useful for transferring them to cultivated alfalfa via marker-assisted selection and for pyramiding Al tolerance QTLs.     

A comparative linkage map of oilseed rape and its use for QTL analysis of seed oil and erucic acid content

We have developed a new DH mapping population for oilseed rape, named TNDH, using genetically and phenotypically diverse parental lines. We used the population in the construction of a high stringency genetic linkage map, consisting of 277 loci, for use in quantitative genetic analysis. A proportion of the markers had been used previously in the construction of linkage maps for Brassica species, thus permitting the alignment of maps. The map includes 68 newly developed Sequence Tagged Site (STS) markers targeted to the homologues of defined genes of A. thaliana. The use of these markers permits the alignment of our linkage map with the A. thaliana genome sequence. An additional 74 loci (31 newly developed STS markers and 43 loci defined by SSR and RFLP markers that had previously been used in published linkage maps) were added to the map. These markers increased the resolution of alignment of the newly constructed linkage map with existing Brassica linkage maps and the A. thaliana genome sequence. We conducted field trials with the TNDH population at two sites, and over 2 years, and identified reproducible QTL for seed oil content and erucic acid content. The results provide new insights into the genetic control of seed oil and erucic acid content in oilseed rape, and demonstrate the utility of the linkage map and population.Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.D. Qiu and C. Morgan authors contributed equally to the work.     

Genetic analysis and mapping of genes controlling freezing tolerance in oilseedBrassica

Freezing tolerance is the ability of plants to survive subfreezing temperatures and is a major component of winter survival. In order to study the genetic regulation of freezing tolerance, an F2 population ofBrassica rapa and a doubled haploid population ofBrassica napus were assayedin vitro for relative freezing tolerance of acclimated and nonacclimated plants. Linkage maps developed previously were used to identify putative quantitative trait loci (QTL). Genomic regions with significant effects on freezing tolerance were not found for theB. napus population, but forB. rapa four regions were associated with acclimated freezing tolerance (FTA) and acclimation ability (FTB), and two unliked regions were associated with nonacclimated freezing tolerance (FTN). Acclimation ability was regulated by genes with very small additive effects and both positive and negative dominance effects. The allele from the winter parent at the FTN QTL had positive additive effects, but negative dominance effects. RFLP loci detected by a cold-induced and a stress-related cDNA fromArabidopsis thaliana mapped near two QTL for FTA/FTB. Further tests are needed to determine if alleles at these loci are responsible for the QTL effects we detected.     

Quantitative trait loci controlling leaf venation in Arabidopsis

Leaf veins provide the mechanical support and are responsible for the transport of nutrients and water to the plant. High vein density is a prerequisite for plants to have C4 photosynthesis. We investigated the genetic variation and genetic architecture of leaf venation traits within the species Arabidopsis thaliana using natural variation. Leaf venation traits, including leaf vein density (LVD) were analysed in 66 worldwide accessions and 399 lines of the multi‐parent advanced generation intercross population. It was shown that there is no correlation between LVD and photosynthesis parameters within A. thaliana. Association mapping was performed for LVD and identified 16 and 17 putative quantitative trait loci (QTLs) in the multi‐parent advanced generation intercross and worldwide sets, respectively. There was no overlap between the identified QTLs suggesting that many genes can affect the traits. In addition, linkage mapping was performed using two biparental recombinant inbred line populations. Combining linkage and association mapping revealed seven candidate genes. For one of the candidate genes, RCI2c, we demonstrated its function in leaf venation patterning.     

Mapping minor QTL for increased stearic acid content in sunflower seed oil

Increased stearic acid (C18:0) content in the seed oil of sunflower would improve the oil quality for some edible uses. The sunflower line CAS-20 (C18:0 genotype Es1Es1es2es2), developed from the high C18:0 mutant line CAS-3 (C18:0 genotype es1es1es2es2; 25% C18:0), shows increased C18:0 levels in its seed oil (8.6%). The objective of this research was to map quantitative trait loci (QTL) conferring increased C18:0 content in CAS-20 in an F₂ mapping population developed from crosses between HA-89 (wild type Es1Es1Es2Es2; low C18:0) and CAS-20, which segregates independently of the macromutation Es1 controlling high C18:0 content in CAS-3. Seed oil fatty acid composition was measured in the F₂ population by gas-liquid chromatography. A genetic linkage map of 17 linkage groups (LGs) comprising 80 RFLP and 19 SSR marker loci from this population was used to identify QTL controlling fatty acid composition. Three QTL affecting C18:0 content were identified on LG3, LG11, and LG13, with all alleles for increased C18:0 content inherited from CAS-20. In total, these QTL explained 43.6% of the C18:0 phenotypic variation. Additionally, four candidate genes (two stearate desaturase genes, SAD6 and SAD17, and a FatA and a FatB thioesterase gene) were placed on the QTL map. On the basis of positional information, QTL on LG11 was suggested to be a SAD6 locus. The results presented show that increased C18:0 content in sunflower seed oil is not a simple trait, and the markers flanking these QTL constitute a powerful tool for plant breeding programs.     

Epistasis and genotype-environment interaction for quantitative trait loci affecting flowering time in Arabidopsis thaliana

A major goal of evolutionary biology is to understand the genetic architecture of the complex quantitative traits that may lead to adaptations in natural populations. Of particular relevance is the evaluation of the frequency and magnitude of epistasis (gene–gene and gene–environment interaction) as it plays a controversial role in models of adaptation within and among populations. Here, we explore the genetic basis of flowering time in Arabidopsis thaliana using a series of quantitative trait loci (QTL) mapping experiments with two recombinant inbred line (RIL) mapping populations [Columbia (Col) x Landsberg erecta (Ler), Ler x Cape Verde Islands (Cvi)]. We focus on the response of RILs to a series of environmental conditions including drought stress, leaf damage, and apical damage. These data were explicitly evaluated for the presence of epistasis using Bayesian based multiple-QTL genome scans. Overall, we mapped fourteen QTL affecting flowering time. We detected two significant QTL–QTL interactions and several QTL–environment interactions for flowering time in the Ler x Cvi population. QTL–environment interactions were due to environmentally induced changes in the magnitude of QTL effects and their interactions across environments – we did not detect antagonistic pleiotropy. We found no evidence for QTL interactions in the Ler x Col population. We evaluate these results in the context of several other studies of flowering time in Arabidopsis thaliana and adaptive evolution in natural populations.