Chemically synthesized non-radioactive biotinylated long-chain nucleic acid hybridization probes.

A new method for the chemical labelling of nucleic acid with biotin to produce non-radioactive probes has been developed. NN'-Bis-(3-aminopropyl)butane-1,4-diamine (spermine) and long-chain diamino compounds (diaminohexane, diaminodecane and diaminododecane) were linked covalently to biotin and the resultant conjugates were attached to nucleic acid by using a cross-linking reagent (glutaraldehyde or diepoxyoctane). Iodoacetylation and biotinylation of the long-chain diamino compounds produced modified biotinylated conjugates that can be linked to DNA without the use of a cross-linking reagent. These types of probes attach one biotin molecule to each linker arm of spermine, diamino and iodoacetylated amino derivatives. Such probes have long linker arms separating the biotin moiety from the hybridization sites of the nucleic acid. These probes can detect 10 pg of target DNA by dot-blot hybridization.     

Non-radioactive hybridization probes prepared by the chemical labelling of DNA and RNA with a novel reagent, photobiotin.

A photo-activatable analogue of biotin, N-(4-azido-2-nitrophenyl)-N'-(N-d-biotinyl-3-aminopropyl)-N'-methyl-1,3- propanediamine (photobiotin), has been synthesized and used for the rapid and reliable preparation of large amounts of stable, non-radioactive, biotin-labelled DNA and RNA hybridization probes. Upon brief irradiation with visible light, photobiotin formed stable linkages with single- and double-stranded nucleic acids yielding probes which were purified from excess reagent by 2-butanol extraction and ethanol precipitation. Using single-stranded phage M13 DNA probes chemically labelled with one biotin per 100-400 residues and dot-blot hybridization reactions on nitrocellulose, as little as 0.5 pg (6 X 10(-18) mol) of target DNA was detected colorimetrically by avidin or streptavidin complexes with acid or alkaline phosphatase from three commercial sources. The sensitivity of detection of target RNA in dot-blots and Northern blots was equivalent to that obtained with 32p-labelled DNA probes. Photobiotin was also used for the labelling of proteins with biotin.     

Functionalization of covalent DNA-streptavidin conjugates by means of biotinylated modulator components.

Covalent DNA-streptavidin conjugates are versatile biomolecular coupling reagents, since they have binding capacity for both a complementary nucleic acid and four molecules of biotin. The DNA-streptavidin hybrid molecules have been investigated for their capabilities to bind two different types of biotinylated components. Thus, (i) a functional biomolecule, e.g., a single-stranded DNA fragment or an enzyme and (ii) low-molecular weight biotin derivatives ("modulators") were coupled stepwise with the hybrid molecules. Modulators were D-biotin, aminobiotin, and biotin-fluorescein conjugate as well as a lysine-rich 10mer peptide, containing a biotin and a fluorescein substituent. These modulators were chosen to affected the hybridization properties of the DNA-streptavidin conjugates. As investigated by surface-plasmon resonance and microplate solid-phase hybridization measurements, D-biotin, biotin-fluorescein, and aminobiotin decreased the efficiency of hybridization with complementary, surface-bound oligonucleotides to a varying extent. The basic peptide increased the conjugate's hybridization efficiency. Moreover, it was demonstrated in two examples how modulators can be utilized as additional functional domains of streptavidin-based conjugates. First, fluorescein-containing modulators were used as hapten groups, allowing a sensitive detection by means of specific antibodies directed against the modulator. Second, the biotinylated peptide was used as a carrier molecule to attach multiple fluorogenic lanthanide-chelate groups to the streptavidin conjugate, enabling its sensitive detection by time-resolved fluorometry. The applicability of this kind of bioconjugation strategy to generate sensor-probes for gene detection assays was demonstrated.     

Construction of DNA-probes and their immunochemical detection using nonradioactive hybridization tests

Simple and efficient chemical approaches to preparation of DNA probes carrying 2,4-dinitrophenyl, dansyl or biotin residues were developed. The residues were introduced using following DNA derivatization procedures: a) transamination of cytidine residues with O-(4-aminobutyl)hydroxylamine; b) mercuration of pyrimidine residues followed by beta-mercaptoethanol modification. It was shown that 2,4-dinitrophenyl-containing DNA probes can be used for nonradioactive hybridization detection of nucleic acids. DNP-DNA: DNA complexes were detected using mouse antibodies specific to 2,4-dinitrophenyl groups, which were developed with peroxidase-conjugated antimouse immunoglobulins. Peroxidase-catalyzed chemoluminescent reaction of luminol oxidation with hydrogen peroxide allowed to detect 10 picograms of the dinitrophenylated single-stranded DNA probe.     

Microwave irradiation-stimulated in situ hybridization procedure with biotinylated DNA probe.

A microwave-stimulated in situ hybridization technique using biotin-labeled DNA probe is described. Both hybridization reaction and the detection of the biotin label (with a alkaline phosphatase or immunofluorescence method) has been performed in the microwave oven. All procedures are completed within one hour. The described method was applied for identification of nucleic acid sequences of human immunodeficiency virus in human cell lines. The resolution and the intensity of the signal are as good as from a standard technique with overnight incubation of the probe. Because of the simplicity and speed of the technique, this procedure can be used in a number of other applications.     

Nonradioactive hybridization probes prepared by the reaction of biotin hydrazide with DNA

A novel one-step chemical method has been developed for the introduction of biotin into nucleic acids for non-isotopic hybridization. The method is based on the interaction of biotin hydrazide with unpaired cytosine residues. The interaction is catalyzed by sodium bisulfite with an optimum at a buffered pH of about 4.5. The reaction reached its maximum after 24 h incubation at a biotin hydrazide concentration of 10 mg/ml. Using streptavidin-alkaline phosphatase conjugates, the limits for detecting the biotinylated probe, either adsorbed directly to nitrocellulose or hybridized to filter-bound target DNA, were 0.3 and 0.9 pg, respectively. The salience of the approach described here over previously used biotin derivatives is that it is quick (one-step), simple and does not involve any enzymatic or instrument-mediated step to introduce the reporter moiety. In addition, other low- and high-molecular-weight hydrazides (e.g. fluorescent or enzyme hydrazides) can serve as the reporter group. The same procedure may be employed for the single-step biotinylation of free cytidine.     

A Comparison of Digoxigenin and Biotin Labelled DNA and RNA Probes for in Situ Hybridization

A number of in situ hybridization protocols using digoxigenin or biotin labelled probes were assessed for viral nucleic acid detection in formalin fixed, paraffin embedded tissue. Single-step detection protocols for biotin labelled probes produced low sensitivity; however, enzyme based one-step detection protocols for digoxigenin probes produced high sensitivity for both RNA and DNA systems. For both probe types, multistep detection protocols produced equally high sensitivity. Use of an enhanced APAAP procedure for digoxigenin labelled probes acheived maximal sensitivity without use of biotin-streptavidin reactions. The sensitivity of nucleic acid detection obtained with a digoxigenin labelled probe is comparable to that obtained using biotin. Digoxigenin labelled probes for nucleic acid detection are recommended for tissues with endogenous biotin.     

Use of bioluminescence in nucleic acid hybridization reactions

Luminescence reactions can be used to detect specific nucleic acid sequences hybridized with a nucleic probe. Different labels such as cytidine sulphone, fluorescein, and biotin can be incorporated into DNA or oligonucleotide molecules and detected by antibody or avidin conjugates coupled to glucose-6P dehydrogenase. On supports such as nitrocellulose filters, sensitivity is not greatly increased using luminescence, but detection is rapid and easy to perform using polaroid film. Moreover, hybridization can be performed with different labelled probes on the same sample. In solution, luminescence can be used to monitor sandwich reactions. The method is less sensitive than detection on filters but can easily be automated. The performance of these assays can be increased considerably by enzymatic amplification of the target catalysed by a thermostable polymerase.     

Monoadduct forming photochemical reagents for labeling nucleic acids for hybridization.

We describe the synthesis of three angelicin derivatives which can be used for labeling nucleic acids with biotin. These compounds were used to label nucleic acids in the presence of lysed cell constituents. The resulting labelled nucleic acids show hybridization to a genus specific probe for E. coli. The relative comparison of sensitivity indicates that a polyamine linker is better than a polyethylene oxide linker between the biotin and angelicin moieties.     

Custom fluorescent-nucleotide synthesis as an alternative method for nucleic acid labeling

The variety of potentially useful dyes or haptenes available for fluorescent nucleic acid hybridization assays is far greater than what can be obtained from commercial sources. Since this diversity could be useful in many laboratory applications, we have developed a simple and inexpensive procedure for preparing nonpurified labeled nucleotides, for use in common nucleic acid labeling reactions, such as PCR and nick translation. The modified nucleotides were synthesized by coupling allylamine-dUTP to the succinimidyl-ester derivatives of the fluorescent dyes or haptenes such as biotin or digoxigenin, which require fluorescently labeled proteins for detection. This method allows custom preparation of most common fluorescent nucleotides and rapid testing of new ones, while reducing the cost of procedures such as multiplex fluorescent in situ hybridization (M-FISH) by 100-200 fold.     

Fluorometric assay for quantitation of biotin covalently attached to proteins and nucleic acids

As a component of the (strept)avidin affinity system, biotin is often covalently linked to proteins or nucleic acids. We describe here a microplate-based high-throughput fluorometric assay for biotin linked to either proteins or nucleic acids based on fluorescence resonance energy transfer (FRET). This assay utilizes a complex of Alexa Fluoro 488 dye-labeled avidin with a quencher dye, 2-(4'-hydroxyazobenzene) benzoic acid (HABA), occupying the biotin binding sites of the avidin. In the absence of biotin, HABA quenches the fluorescence emission of the Alexa Fluor 488 dyes via FRET HABA is displaced when biotin binds to the Alexa Fluor 488 dye-labeled avidin, resulting in decreased FRET efficiency. This mechanism results in an increase in fluorescence intensity directly related to the amount of biotin present in the sample. The assay is able to detect as little as 4 pmol biotin in a 0.1 mL volume within 15 min of adding sample to the reagent, with a Z-factor > 0.9.     

Design of a sandwich-mode amperometric biosensor for detection of PML/RARα fusion gene using locked nucleic acids on gold electrode

In this study, a novel DNA electrochemical probe (locked nucleic acid, LNA) was designed and involved in constructing an electrochemical DNA biosensor for detection of promyelocytic leukemia/retinoic acid receptor alpha (PML/RARα) fusion gene in acute promyelocytic leukemia for the first time. This biosensor was based on a 'sandwich' sensing mode, which involved a pair of LNA probes (capture probe immobilized at electrode surface and biotinyl reporter probe as an affinity tag for streptavidin-horseradish peroxidase (streptavidin-HRP). Since biotin can be connected with streptavidin-HRP, this biosensor offered an enzymatically amplified electrochemical current signal for the detection of target DNA. In the simple hybridization system, DNA fragment with its complementary DNA fragment was evidenced by amperometric detection, with a detection limit of 74 fM and a linear response range of 0.1-10 pM for synthetic PML/RARα fusion gene in acute promyelocytic leukemia (APL). Otherwise, the biosensor showed an excellent specificity to distinguish the complementary sequence and different mismatch sequences. The new pattern also exhibited high sensitivity and selectivity in mixed hybridization system.     

Peptide nucleic acid-assisted topological labeling of duplex dna

Peptide nucleic acids (PNAs) are a family of synthetic polyamide mimics of nucleic acids that offer a variety of applications. Pyrimidine bis-PNAs can be used for rational design of novel interlocked DNA nanostructures, earring labels, representing locked pseudorotaxanes or locked catenanes. These structures are created through DNA ligase-mediated catenation of duplex DNA with a circularized oligonucleotide tag at a designated DNA site. The assembly is performed via formation of the PD-loop consisting of a pair of bis-PNA openers and the probe oligonucleotide. The openers locally expose one of the two strands of duplex DNA for hybridizing the probe, whose termini are complementary to the displaced DNA strand. After hybridization, they are in juxtaposition and can subsequently be linked by DNA ligase. As a result, a true topological link forms at a precise position on the DNA double helix yielding locked, earring-like label. DNA topological labeling can be done both in solution and, for longer templates, within the agarose gel plug. Accordingly, highly localized DNA detection with rolling circle amplification of hybridization signal and effective micromanipulations with DNA duplexes become possible through precise spatial positioning of various ligands on the DNA scaffold.     

Peptide nucleic acids: deoxyribonucleic acid mimics with a peptide backbone

This tutorial briefly describes a new class of synthetic biopolymer, which is referred to as peptide nucleic acid (PNA). In PNA, individual nucleobases are linked to an achiral neutral peptide backbone. PNA exhibits the hybridization characteristic (e.g., Watson—Crick duplex formation) of DNA. The achiral peptide backbone provides similar interbase distances as natural DNA, and adequate flexibility to permit base pair interactions with complementary RNA or DNA strands. Several potential applications of PNA oligomers in biotechnology are suggested. These include the use of PNAs as a probe for specific recognition of a DNA or RNA sequence selective, purification of nucleic acids via designed high affinity binding to PNA, screening for DNA mutations, and as possible therapeutic agents.     

肽核酸在分子生物学技术中的应用

肽核酸(PNA)作为一种人工合成的核酸类似物,以中性的肽链酰胺2-氨基乙基甘氨酸键取代了DNA中的戊糖磷酸二酯键骨架,其余部分与DNA相同。PNA可通过Watson-Crick碱基配对的形式识别并结合DNA或RNA序列,形成稳定的双螺旋结构。与传统的DNA或RNA相比,PNA具有生物学稳定性高、杂交特异性强、杂合体的稳定性高和杂交速度快等明显优点,使PNA具有良好的物理化学性质和生物学特性,在检测目的核酸序列中单碱基突变、PCR基因分子诊断与检测、荧光原位杂交定量分析、基因芯片和生物传感器技术等调控水平和临床应用上有自己的特点。简要综述了近年来肽核酸在上述分子生物学技术中的运用以及应用前景的展望。     

Design and synthesis of polyacrylamide-based oligonucleotide supports for use in nucleic acid diagnostics.

Polyacrylamide supports, in a range of pore sizes, were investigated as nucleic acid affinity matrices for the detection of target DNA or RNA sequences using a sandwich hybridization format. Bromoacetyl and thiol oligonucleotide derivatives were covalently linked to sulfhydryl- and bromoacetyl-polyacrylamide supports with greater than 95% end-attachment efficiencies. These polyacrylamide-oligonucleotide supports were further derivatized with anionic residues to provide multi-functional supports which show low non-specific binding for non-complementary nucleic acids. While all the polyacrylamide-oligonucleotide supports capture complementary oligonucleotides with high affinity, the pore size was found to be a critical parameter in sandwich hybridization reactions. The superior hybridization characteristics of the Trisacryl support was ascribed to a combination of its macroporous nature, hydrophilicity and the terminal attachment of its capture oligonucleotides.     

Surface density dependence of PCR amplicon hybridization on PNA/DNA probe layers

Surface plasmon field-enhanced fluorescence spectroscopy was employed to extensively investigate the hybridization behaviors of polymerase chain reaction (PCR) amplicons on a peptide nucleic acid (PNA) or DNA probe layer that was previously attached on a streptavidin-modified gold surface via biotin/streptavidin interaction. Despite the neutral backbone of PNA, the hybridization reactions were strongly influenced by the variation of ionic strength. The association rates exhibited a monotonic decrease with ionic strength increase and the maximum hybridization signal was achieved at an intermediate sodium concentration (approximately 100 mM). These effects were mainly ascribed to the electrostatic cross talk among the hybridized DNA molecules and the secondary structure of PCR amplicons. For the negatively charged DNA probes, the hybridization reaction was subjected additionally to the DNA/DNA electrostatic barrier, particularly in lower ionic strength range (e.g., 10 approximately 150 mM Na(+)). The electrostatic cross talk was shown to be largely reduced if the PNA probe layer was sufficiently diluted by following a strategic templated immobilization method. As a consequence, a pseudo-first-order kinetic model was applicable to describe the hybridization kinetics, and affinity constants were derived for evaluating the influence of single nucleotide polymorphisms (SNPs).     

大分子的吸入治疗

随着重组DNA技术和分子生物学的发展,以蛋白质和多肽为主的大分子成为一类新型药物,并越来越受到重视,新兴的基因治疗技术使得核酸大分子也有可能成为药物。目前,绝大部分大分子药物都是通过注射途径给药,病人在医院注射费用昂贵且不方便,因而许多注射替代给药途径成为研究热门,通过肺部吸入给药就是一种很有吸引力的非侵入性给药途径。本介绍了肺吸收大分子的可能机制和大分吸入治疗的临床与基础研究以及面临的问题。     

Universal labeling chemistry for nucleic acid detection on DNA-arrays

We show here a new and efficient aqueous chemistry for labeling of any class of nucleic acids for their detection on DNA chip. The labels contain a diazo function as reactive moiety and biotin as detectable unit. The highly selective reaction of diazo group on the phosphate does not disrupt base pairing recognition and hybridization specificity.     

Covalent DNA immobilization on polymer-shielded silver-coated quartz crystal microbalance using photobiotin-based UV irradiation.

The use of a commercial, silver-coated quartz crystal microbalance (QCM) as a disposable, low-cost, and reliable DNA sensor is presented. This is an incorporation of polymer-based silver electrode shielding and photochemistry-based surface modification for covalent DNA immobilization. To prevent undesired oxidation, the silver electrodes are coated with thin polystyrene films. The polymer surfaces are then modified by a photoreactive biotin derivative (photobiotin) under UV irradiation. The resulting biotin residues on the polymer-shielded surface react with a tetrameric avidin. Consequently a biotin-labeled DNA probe can be immobilized through a biotin-avidin-biotin bridge. A 14-mer single-stranded biotin-DNA probe and a 70-mer single-stranded DNA fragment containing complementary or noncomplementary sequences are used as a model system for DNA hybridization assay on the proposed sensors. The shielding ability of the polystyrene coatings after photo irradiation is investigated. The DNA probe binding capacity, hybridization efficiency, and kinetics are also investigated.