Solid-phase synthesis of an N-(phenylalkyl)cinnamide library via Horner-Wadsworth-Emmons reaction

A readily automated solid-phase approach to the synthesis of diverse N-(phenylalkyl)cinnamides, analogues of the NR2B antagonist 2, is described. The procedure utilizes polymer supported N-(phenylalkyl)amines, (diethylphosphono)acetic acid and a wide range of commercially available hydroxybenzaldehydes. The key step, a Horner-Wadsworth-Emmons reaction is achieved under mild conditions and was found to be general for a large number of benzaldehydes. A 225-member focused library was synthesized using a Tecan Combitec synthesizer.     

Solid-phase synthesis of triple-helical collagen-model peptides

Summary The triple-helical conformation of collagen has been proposed to be important for mediation of cellular activities, such as adhesion and activation, extracellular matrix assembly, and enzyme function. We have developed synthetic protocols that allow for the study of biological activities of specific collagen sequences in triple-helical conformation. These methods primarily involve solid-phase assembly and covalent linkage of three peptide chains. The resultant triple-helical peptides have sufficient thermal stabilities to permit structural and biological characterization under physiological conditions. The present article critically reviews the various approaches for constructing synthetic triple-helices.This paper is based on a presentation given at the Symposium on Peptide Structure and Design as part of the 31st Annual ACS Western Regional Meeting held in San Diego, CA, USA, October 18–21, 1995.     

Solid-phase synthesis of C-terminal modified peptides

Solid-phase synthesis of biomolecules, of which peptides are the principal example, is well established. However, synthetic peptides containing modifications at the carboxy termini are often desired because of their potential therapeutic properties. As a result, there is a necessity for effective solid-phase strategies for the preparation of peptides with C-terminal end groups other than the usual carboxylic acid and carboxamide functionalities. The present article primarily reviews literature reports on methods for solid-phase synthesis of C-terminal modified peptides. In addition, general information about biological activities and/or synthetic applications of each individual class of peptide is also provided.     

The synthesis and some biological properties of N-(6-purinyl)peptides

The chemical synthesis and biological properties of N-(6-purinyl)peptides are described. N-(6-Purinyl)amino-acid derivatives were synthesized and condensed with amino acid esters and peptide esters using the dicyclohexylcarbodiimide/N-hydroxysuccinimide method. The products were isolated via gel filtration on Sephadex G-10 in 0.05M NH4HCO3 followed by either ion exchange chromatography on SP-Sephadex or by preparative HPLC. The methyl esters were saponified and the tert-butyl ester group was removed by treatment with trifluoroacetic acid without damaging the purinyl residue. N-(6-Purinyl)peptides were characterised by chromatographic and spectroscopic methods. Acid hydrolysis of N-(6-purinyl)-L-amino acids caused the racemization of the neighbouring L-amino acid. Model studies were performed with N-(6-purinyl)-L-alanine, N-(6-purinyl)-D-alanine, N-(6-purinyl)-L-alanyl-L-leucine and N-(6-purinyl)-D-alanyl-L-leucine. After acid hydrolysis the N-(6-purinyl)amino acids were totally racemized and the N-(6-purinyl)dipeptides formed 14% of the enantiomer of alanine. The N-(6-purinyl)-omega-amino acids and the N-(6-purinyl)peptides were screened in a limited number of tests as immunomodulators (antibody-secretion, phagocytosis, cytostatic activity of macrophages) and as cytotoxic agents.     

Solid-phase synthesis and characterization of N-methyl-rich peptides.

A library of peptides required for a project investigating the factors relevant for blood-brain barrier transport was synthesized on solid phase. As a result of the high N-methylamino acid content in the peptides, their syntheses were challenging and form the basis of the work presented here. The coupling of protected N-methylamino acids with N-methylamino acids generally occurs in low yield. (7-azabenzotriazol-1-yloxy)-tris(pyrrolidino)phosphonium hexafluorophosphate (PyAOP) or PyBOP/1-hydroxy-7-azabenzotriazole (HOAt), are the most promising coupling reagents for these couplings. When a peptide contains an acetylated N-methylamino acid at the N-terminal position, loss of Ac-N-methylamino acid occurs during trifluoroacetic acid (TFA) cleavage of the peptide from the resin. Other side reactions resulting from acidic cleavage are described here, including fragmentation between consecutive N-methylamino acids and formation of diketopiperazines (DKPs). The time of cleavage is shown to greatly influence synthetic results. Finally, high-performance liquid chromatography (HPLC) profiles of N-methyl-rich peptides show multiple peaks because of slow conversion between conformers.     

Solid-phase synthesis of glucose-derived Amadori peptides.

Nonenzymatic glycosylation or glycation of amino groups in peptides and proteins by D-glucose is a universal reaction with important implications for the pathogenesis of many diseases including diabetes mellitus. Here a general approach is reported to synthesize site specifically glucose-derived N-glycated peptides. Therefore, model peptides H-AKASASFL-NH(2), H-AKASADFL-NH(2), H-ASKASKFL-NH(2), and H-AKDSASFL-NH(2) were synthesized on solid phase by Fmoc chemistry using Fmoc-Lys(4-methyltrityl)-OH in positions 2 or 3 to be glycated. After completion of the synthesis, the acid labile 4-methyltrityl-group was cleaved with 1% TFA in DCM and the free amino groups were glycated by the Lobry de Bruyn reaction using 2,3:4,5-di-O-isopropylidene-aldehydo-beta-D-arabino-hexos-2-ulo-2,6-pyranose on solid phase. After TFA treatment, the crude peptides were obtained in high yields and purities above 80%. Minor by-products were well separated on reversed-phase HPLC.     

Solid-phase synthesis of acridine-based threading intercalator peptides

The preparation of a novel acridine-based amino acid is reported. This N-Alloc-protected monomer can be coupled and deprotected under solid-phase peptide synthesis procedures to create acridine peptide conjugates as potential threading intercalators. A peptide containing this novel amino acid undergoes spectral changes in the presence of duplex DNA and RNA consistent with intercalative binding.     

Solid-phase synthesis of C-terminally modified peptides.

In this paper, a straightforward and generic protocol is presented to label the C-terminus of a peptide with any desired moiety that is functionalized with a primary amine. Amine-functional molecules included are polymers (useful for hybrid polymers), long alkyl chains (used in peptide amphiphiles and stabilization of peptides), propargyl amine and azido propyl-amine (desirable for 'click' chemistry), dansyl amine (fluorescent labeling of peptides) and crown ethers (peptide switches/hybrids). In the first part of the procedure, the primary amine is attached to an aldehyde-functional resin via reductive amination. To the secondary amine that is produced, an amino acid sequence is coupled via a standard solid-phase peptide synthesis protocol. Since one procedure can be applied for any given amine-functional moiety, a robust method for C-terminal peptide labeling is obtained.     

Solid-phase synthesis of chemotactic peptides using alpha-azido acids.

Four chemotactic peptides, For-Met-Xxx-Phe-OMe, with an alpha,alpha-disubstituted amino acid at position 2 have been synthesized by the azido acid method [Meldal M, Juliano MA, Jansson AM. 1997. Azido acids in a novel method of solid-phase peptide synthesis. Tetrahedron Lett. 38: 2531-2534] on solid-phase, and were tested for biological activity. Dipropylglycine in the central position (Xxx) was found to be as active as the natural chemotactic peptide for chemotactic activity toward human neutrophils. Higher yields were obtained than previously reported solution-phase syntheses of chemotactic peptides, and EEDQ was used successfully for the difficult solid-phase formylation of amino groups.     

Solid-phase synthesis of peptidosulfonamide containing peptides derived from Leu-enkephalin

Using Boc or Fmoc-protected β-substituted aminoethanesulfonyl chlorides (2-substituted taurylchlorides) the solid-phase synthesis of dipeptidosulfonamides as well as peptidosulfonamide containing peptides derived from Leu-enkephalin is described. The binding activity of the peptidosulfonamide YGGFL derivatives is reported.     

Solid-phase synthesis of sauvagine-(17-40)

The solid-phase synthesis of the tetracosapeptide corresponding to the C-terminal amino acid sequence of sauvagine is described. After purification by gel filtration, the polypeptide appeared to possess an acceptable degree of homogeneity, as judged by different kinds of electrophoresis and chromatography, and by automated Edman degradation analysis. Preliminary pharmacological results indicate that the fragment-(17-40) is practically devoid of any sauvagine activity on the circulatory system and endocrine glands; a weak effect on gastric emptying delay has been demonstrated (1% of the natural product).     

Solid-phase synthesis of peptides containing arginine with an unprotected guanidine group

A new variant of the solid phase synthesis of arginine-containing peptides was proposed. The conditions for the attachment to the Wang polymer of N alpha-Fmoc-arginine containing a protonated guanidine group were found. We demonstrated that this attachment is accompanied by neither racemization nor the attachment of the second Arg residue. Side reactions involving the guanidine group of arginine were studied, and methods for their prevention were proposed. The comparison of the carbodiimide method with a 1-hydroxybenzotriazole additive and a modified method with the use of Kastro's reagent for the introduction of N alpha-Fmoc-Arg residue with the unprotected guanidine group into the growing peptide chain demonstrated the advantages of the second method. Bradykinin and a peptide corresponding to the 584-591 sequence of the transmembrane gp41 from HIV-1 were synthesized by the method proposed here.     

Solid-phase synthesis of 2-[18F]fluoropropionyl peptides

The 2-[(18)F]fluoropropionic (2-[(18)F]FPA) acid is used as a prosthetic group for radiolabeling proteins and peptides for targeted imaging using positron emission tomography (PET). Radiolabeling of compounds with more than one acylable functional group can lead to complex mixtures of products; however, peptides can be labeled regioselectively on the solid phase. We investigated the use of a solid-phase approach for the preparation of 2-[(18)F]fluoropropionyl peptides. [(18)F]FPA was prepared and conjugated to the peptides attached to the solid phase support. The (18)F-labeled peptides were obtained in 175 min with decay corrected yields of 10% (related to [(18)F]fluoride) and with a purity of 76-99% prior HPLC purification. The suitability of various coupling reagents and solid supports were tested for radiolabeling of several peptides of various lengths.     

Solid-phase synthesis of cyclic RGD-furanoid sugar amino acid peptides as integrin inhibitors

The solid-phase synthesis of cyclic RGD peptides containing either one or two furanoid sugar amino acids (SAAs) is reported. Using a cyclization-cleavage approach five peptides were successfully assembled and consecutively tested on their ability to bind to the integrin receptors alpha(v)beta(3) and alpha(IIb)beta(3). The cyclic tetrapeptide c[RGD-SAA] (1) showed the most promising activity in an inhibition assay with an IC(50) of 1.49 microM for the alpha(v)beta(3) receptor and 384 nM for the alpha(IIb)beta(3) receptor.     

Solid-phase C-terminal sequencing of peptides

Summary C-terminal amino acid sequence analysis seemed to be established procedure, as the counterpart of Edman's N-terminal sequencing method. However, poor recovery of the C-terminal amino acids in the reaction in homogeneous solution suggested further improvement of the method. In the present study, N-terminal amino acid was fixed covalently to the controlled pore glass (CPG) beads and the C-terminal amino acid was activated (by treating with acetic anhydride), coupled with thiocyanate to form thiohydantoin (TH) ring at the C-terminus. Then, the C-terminal amino acid was split off as the corresponding TH derivative, and analyzed by HPLC. Hydrolysis of the TH derivative was achieved at 60°C in the presence of 2 M HC1 for 2 h. Solid phase fixed peptide was washed simply with acetone, and dried for the next cycle of the reaction. So far obtained results in the heterogeneous mixture are not satisfactory in terms of the recovery of the C-terminal TH, and improvement of the recovery and further steps are under progress.     

Solid-phase synthesis of a range of O-phosphorylated peptides by post-assembly phosphitylation and oxidation.

A completely general method for the O-phosphorylation of peptides of any given composition using solid-phase methodology is described. Peptides were assembled using Fmoc amino acid active esters, with base used for Fmoc deprotection. Unprotected amino acid side chain hydroxyl groups were phosphitylated and oxidised at the end of the assembly using bis(benzyloxy)(diisopropylamino)phosphine and tert.-butylhydroperoxide respectively. TFA was used for final deprotection of the amino acid side chains and for simultaneous cleavage from the resin. The synthesis of O-phosphopeptides of up to 15 residues in length is described.     

Kinetics of enzymatic synthesis of peptides in aqueous/organic biphasic systems. Thermolysin-catalyzed synthesis of N-(benzyloxycarbonyl)-L-phenylalanyl-L-phenylalanine methyl ester

We studied kinetics of thermolysin-catalyzed peptide synthesis in an aqueous/organic biphasic system theoretically and experimentally. As a model reaction producing a condensation product having no dissociating groups, we used the synthesis of N-(benzyloxycarbonyl)-L-phenylalanyl-L-phenylalanine methyl ester (Z-Phe2OMe) from N-(benzyloxycarbonyl)-L-phenylalanine (Z-Phe) and L-phenylalanine methyl ester (PheOMe). Usually, ethyl acetate was used as the organic solvent. First we studied the kinetics of the synthesis of Z-Phe2OMe in a buffer solution saturated with ethyl acetate. Then, factors that may affect the kinetics in the biphasic system were examined. The course of Z-Phe2OMe synthesis in the biphasic system was explained by the rate equations obtained, using the partitions of substrate and product and non-enzymatic decomposition of PheOMe. In the biphasic reaction system, the rate of synthesis was lower for a wide range of pH due to the unfavorable partition of PheOMe in the aqueous phase, but yields were higher than in the buffer solution. The effects of the organic solvents on the rate of synthesis could also be explained by variations in the partition coefficient of PheOMe. Finally, we gave a way to predict the aqueous-phase pH change caused by partitioning of the substrate. The significance of the pH change was shown in connection with the reaction using the immobilized enzyme in an organic solvent.     

Kinetics and equilibrium of enzymatic synthesis of peptides in aqueous/organic biphasic systems. Thermolysin-catalyzed synthesis of N-(benzyloxycarbonyl)-L-aspartyl-L-phenylalanine methyl ester

We studied kinetics and the equilibrium relationship for the thermolysin-catalyzed synthesis of N-(benzyloxycarbonyl)-L-aspartyl-L-phenylalanine methyl ester (Z-Asp-PheOMe) from N-(benzyloxycarbonyl)-L-aspartic acid (Z-Asp) and L-phenylalanine methyl ester (PheOMe) in an aqueous-organic biphasic system. This is a model reaction giving a condensation product with dissociating groups. The kinetics for the synthesis of Z-Asp-PheOMe in aqueous solution saturated with ethyl acetate was expressed by a rate equation for the rapid-equilibrium random bireactant mechanism, and the reverse hydrolysis reaction was zero-order with respect to Z-Asp-PheOMe concentration. The courses of synthesis of Z-Asp-PheOMe in the biphasic system were well explained, by the rate equations obtained for the aqueous solution and by the partition of substrate and condensation product between the both phases. The rate of synthesis in the biphasic system was much lower than in aqueous solution due to the unfavorable partition of PheOMe in the aqueous phase. The equation for the equilibrium yield of Z-Asp-PheOMe in the biphasic system was derived assuming that only the non-ionized forms of the substrate and condensation product exist in the organic phase. It was found theoretically and experimentally that the yield of Z-Asp-PheOMe is maximum at the aqueous-phase pH of around 5, lower than for synthesis in aqueous solution. The effect of the organic solvent on the rate and equilibrium for the synthesis of Z-Asp-PheOMe could be explained by the variation in the partition coefficient. The effect of the partitioning of substrate on the aqueous-phase pH change was also shown.     

Solid-phase synthesis of peptides containing phosphoserine using phosphate tert.-butyl protecting group

In this paper, we report the solid-phase synthesis of peptides containing O-phosphonoserine using BOP as coupling reagent. Commercially available Fmoc amino-acids linked to p-alkoxybenzyl resin were used in the first step and Alloc amino acids in the following. Alloc group was removed by catalytic hydrostannolytic cleavage. Acid-labile side-chain protecting groups (including phosphate residue) were used. Thus, both removal of side-chain protecting groups and cleavage of the phosphopeptide from the resin were achieved in one step by treatment with TFA. Alloc serine was phosphorylated by the phosphoramidite method. This strategy enables the preparation of peptides with selectively phosphorylated residue and overcomes problems due to repetitive treatments with TFA and final cleavage with HF.