Optical Characteristics of Thiamine in Model Systems and in Holoenzyme

The optical properties of thiamine diphosphate-dependent enzymes change significantly on their interaction with cofactors (thiamine, bivalent metal ions) and substrates. These changes are connected with structural alterations of the active site and the mechanism of its functioning, and in some cases they reflect changes in the optical properties of the coenzyme itself within the protein. The use of optical characteristics, especially together with model systems, appeared to be a rather promising approach for investigation of the active site of thiamine diphosphate-dependent enzymes and the mechanism of its functioning. So, it seemed to be useful to summarize the literature data concerning the optical characteristics of thiamine (thiamine diphosphate) in model systems and the efficiency of their application for study of thiamine diphosphate-dependent enzymes.     

The crystal structure of phenylpyruvate decarboxylase from Azospirillum brasilense at 1.5 A resolution. Implications for its catalytic and regulatory mechanism

Phenylpyruvate decarboxylase (PPDC) of Azospirillum brasilense, involved in the biosynthesis of the plant hormone indole-3-acetic acid and the antimicrobial compound phenylacetic acid, is a thiamine diphosphate-dependent enzyme that catalyses the nonoxidative decarboxylation of indole- and phenylpyruvate. Analogous to yeast pyruvate decarboxylases, PPDC is subject to allosteric substrate activation, showing sigmoidal v versus [S] plots. The present paper reports the crystal structure of this enzyme determined at 1.5 A resolution. The subunit architecture of PPDC is characteristic for other members of the pyruvate oxidase family, with each subunit consisting of three domains with an open alpha/beta topology. An active site loop, bearing the catalytic residues His112 and His113, could not be modelled due to flexibility. The biological tetramer is best described as an asymmetric dimer of dimers. A cysteine residue that has been suggested as the site for regulatory substrate binding in yeast pyruvate decarboxylase is not conserved, requiring a different mechanism for allosteric substrate activation in PPDC. Only minor changes occur in the interactions with the cofactors, thiamine diphosphate and Mg2+, compared to pyruvate decarboxylase. A greater diversity is observed in the substrate binding pocket accounting for the difference in substrate specificity. Moreover, a catalytically important glutamate residue conserved in nearly all decarboxylases is replaced by a leucine in PPDC. The consequences of these differences in terms of the catalytic and regulatory mechanism of PPDC are discussed.     

Activation segment dimerization: a mechanism for kinase autophosphorylation of non-consensus sites

Protein kinase autophosphorylation of activation segment residues is a common regulatory mechanism in phosphorylation-dependent signalling cascades. However, the molecular mechanisms that guarantee specific and efficient phosphorylation of these sites have not been elucidated. Here, we report on three novel and diverse protein kinase structures that reveal an exchanged activation segment conformation. This dimeric arrangement results in an active kinase conformation in trans, with activation segment phosphorylation sites in close proximity to the active site of the interacting protomer. Analytical ultracentrifugation and chemical cross-linking confirmed the presence of dimers in solution. Consensus substrate sequences for each kinase showed that the identified activation segment autophosphorylation sites are non-consensus substrate sites. Based on the presented structural and functional data, a model for specific activation segment phosphorylation at non-consensus substrate sites is proposed that is likely to be common to other kinases from diverse subfamilies.     

Structural basis for activation of the thiamin diphosphate-dependent enzyme oxalyl-CoA decarboxylase by adenosine diphosphate

Oxalyl-coenzyme A decarboxylase is a thiamin diphosphate-dependent enzyme that plays an important role in the catabolism of the highly toxic compound oxalate. We have determined the crystal structure of the enzyme from Oxalobacter formigenes from a hemihedrally twinned crystal to 1.73 A resolution and characterized the steady-state kinetic behavior of the decarboxylase. The monomer of the tetrameric enzyme consists of three alpha/beta-type domains, commonly seen in this class of enzymes, and the thiamin diphosphate-binding site is located at the expected subunit-subunit interface between two of the domains with the cofactor bound in the conserved V-conformation. Although oxalyl-CoA decarboxylase is structurally homologous to acetohydroxyacid synthase, a molecule of ADP is bound in a region that is cognate to the FAD-binding site observed in acetohydroxyacid synthase and presumably fulfils a similar role in stabilizing the protein structure. This difference between the two enzymes may have physiological importance since oxalyl-CoA decarboxylation is an essential step in ATP generation in O. formigenes, and the decarboxylase activity is stimulated by exogenous ADP. Despite the significant degree of structural conservation between the two homologous enzymes and the similarity in catalytic mechanism to other thiamin diphosphate-dependent enzymes, the active site residues of oxalyl-CoA decarboxylase are unique. A suggestion for the reaction mechanism of the enzyme is presented.     

Conformational restrictions in the active site of unliganded human caspase-3

Caspases are cysteine proteases that play a critical role in the initiation and regulation of apoptosis. These enzymes act in a cascade to promote cell death through proteolytic cleavage of intracellular proteins. Since activation of apoptosis is implicated in human diseases such as cancer and neurodegenerative disorders, caspases are targets for drugs designed to modulate their action. Active caspases are heterodimeric enzymes with two symmetrically arranged active sites at opposite ends of the molecule. A number of crystal structures of caspases with peptides or proteins bound at the active sites have defined the mechanism of action of these enzymes, but molecular information about the active sites before substrate engagement has been lacking. As part of a study of peptidyl inhibitors of caspase-3, we crystallized a complex where the inhibitor did not bind in the active site. Here we present the crystal structure of the unoccupied substrate-binding site of caspase-3. No large conformational differences were apparent when this site was compared with that in enzyme-inhibitor complexes. Instead, the 1.9 A structure reveals critical side chain movements in a hydrophobic pocket in the active site. Notably, the side chain of tyrosine204 is rotated by approximately 90 degrees so that the phenol group occupies the S2 subsite in the active site. Thus, binding of substrate or inhibitors is impeded unless rotation of this side chain opens the area. The positions of these side chains may have important implications for the directed design of inhibitors of caspase-3 or caspase-7.     

Mechanistic details of the actinobacterial lyase-catalyzed degradation reaction of 2-hydroxyisobutyryl-CoA

Actinobacterial 2-hydroxyacyl-CoA lyase reversibly catalyzes the thiamine diphosphate-dependent cleavage of 2-hydroxyisobutyryl-CoA to formyl-CoA and acetone. This enzyme has great potential for use in synthetic one-carbon assimilation pathways for sustainable production of chemicals, but lacks details of substrate binding and reaction mechanism for biochemical reengineering. We determined crystal structures of the tetrameric enzyme in the closed conformation with bound substrate, covalent postcleavage intermediate, and products, shedding light on active site architecture and substrate interactions. Together with molecular dynamics simulations of the covalent precleavage complex, the complete catalytic cycle is structurally portrayed, revealing a proton transfer from the substrate acyl Cβ hydroxyl to residue E493 that returns it subsequently to the postcleavage Cα-carbanion intermediate. Kinetic parameters obtained for mutants E493A, E493Q, and E493K confirm the catalytic role of E493 in the WT enzyme. However, the 10- and 50-fold reduction in lyase activity in the E493A and E493Q mutants, respectively, compared with WT suggests that water molecules may contribute to proton transfer. The putative catalytic glutamate is located on a short α-helix close to the active site. This structural feature appears to be conserved in related lyases, such as human 2-hydroxyacyl-CoA lyase 2. Interestingly, a unique feature of the actinobacterial 2-hydroxyacyl-CoA lyase is a large C-terminal lid domain that, together with active site residues L127 and I492, restricts substrate size to ≤C5 2-hydroxyacyl residues. These details about the catalytic mechanism and determinants of substrate specificity pave the ground for designing tailored catalysts for acyloin condensations for one-carbon and short-chain substrates in biotechnological applications.     

Catalytic acid-base groups in yeast pyruvate decarboxylase. 3. A steady-state kinetic model consistent with the behavior of both wild-type and variant enzymes at all relevant pH values.

The widely quoted kinetic model for the mechanism of yeast pyruvate decarboxylase (YPDC, EC 4.1.1.1), an enzyme subject to substrate activation, is based on data for the wild-type enzyme under optimal experimental conditions. The major feature of the model is the obligatory binding of substrate in the regulatory site prior to substrate binding at the catalytic site. The activated monomer would complete the cycle by irreversible decarboxylation of the substrate and product (acetaldehyde) release. Our recent kinetic studies of YPDC variants substituted at positions D28 and E477 at the active center necessitate some modification of the mechanism. It was found that enzyme without substrate activation apparently is still catalytically competent. Further, substrate-dependent inhibition of D28-substituted variants leads to an enzyme form with nonzero activity at full saturation, requiring a second major branch point in the mechanism. Kinetic data for the E477Q variant suggest that three consecutive substrate binding steps may be needed to release product acetaldehyde, unlikely if YPDC monomer is the minimal catalytic unit with only two binding sites for substrate. A model to account for all kinetic observations involves a functional dimer operating through alternation of active sites. In the context of this mechanism, roles are suggested for the active center acid-base groups D28, E477, H114, and H115. The results underline once more the enormous importance that both aromatic rings of the thiamin diphosphate, rather than only the thiazolium ring, have in catalysis, a fact little appreciated prior to the availability of the 3-dimensional structure of these enzymes.     

Divergent allosteric patterns verify the regulatory paradigm for aspartate transcarbamylase

The native Escherichia coli aspartate transcarbamoylase (ATCase, E.C. 2.1.3.2) provides a classic allosteric model for the feedback inhibition of a biosynthetic pathway by its end products. Both E. coli and Erwinia herbicola possess ATCase holoenzymes which are dodecameric (2(c3):3(r2)) with 311 amino acid residues per catalytic monomer and 153 and 154 amino acid residues per regulatory (r) monomer, respectively. While the quaternary structures of the two enzymes are identical, the primary amino acid sequences have diverged by 14 % in the catalytic polypeptide and 20 % in the regulatory polypeptide. The amino acids proposed to be directly involved in the active site and nucleotide binding site are strictly conserved between the two enzymes; nonetheless, the two enzymes differ in their catalytic and regulatory characteristics. The E. coli enzyme has sigmoidal substrate binding with activation by ATP, and inhibition by CTP, while the E. herbicola enzyme has apparent first order kinetics at low substrate concentrations in the absence of allosteric ligands, no ATP activation and only slight CTP inhibition. In an apparently important and highly conserved characteristic, CTP and UTP impose strong synergistic inhibition on both enzymes. The co-operative binding of aspartate in the E. coli enzyme is correlated with a T-to-R conformational transition which appears to be greatly reduced in the E. herbicola enzyme, although the addition of inhibitory heterotropic ligands (CTP or CTP+UTP) re-establishes co-operative saturation kinetics. Hybrid holoenzymes assembled in vivo with catalytic subunits from E. herbicola and regulatory subunits from E. coli mimick the allosteric response of the native E. coli holoenzyme and exhibit ATP activation. The reverse hybrid, regulatory subunits from E. herbicola and catalytic subunits from E. coli, exhibited no response to ATP. The conserved structure and diverged functional characteristics of the E. herbicola enzyme provides an opportunity for a new evaluation of the common paradigm involving allosteric control of ATCase.     

Crystallographic comparison of manganese- and iron-dependent homoprotocatechuate 2,3-dioxygenases

The X-ray crystal structures of homoprotocatechuate 2,3-dioxygenases isolated from Arthrobacter globiformis and Brevibacterium fuscum have been determined to high resolution. These enzymes exhibit 83% sequence identity, yet their activities depend on different transition metals, Mn2+ and Fe2+, respectively. The structures allow the origins of metal ion selectivity and aspects of the molecular mechanism to be examined in detail. The homotetrameric enzymes belong to the type I family of extradiol dioxygenases (vicinal oxygen chelate superfamily); each monomer has four betaalphabetabetabeta modules forming two structurally homologous N-terminal and C-terminal barrel-shaped domains. The active-site metal is located in the C-terminal barrel and is ligated by two equatorial ligands, H214NE1 and E267OE1; one axial ligand, H155NE1; and two to three water molecules. The first and second coordination spheres of these enzymes are virtually identical (root mean square difference over all atoms, 0.19 A), suggesting that the metal selectivity must be due to changes at a significant distance from the metal and/or changes that occur during folding. The substrate (2,3-dihydroxyphenylacetate [HPCA]) chelates the metal asymmetrically at sites trans to the two imidazole ligands and interacts with a unique, mobile C-terminal loop. The loop closes over the bound substrate, presumably to seal the active site as the oxygen activation process commences. An "open" coordination site trans to E267 is the likely binding site for O2. The geometry of the enzyme-substrate complexes suggests that if a transiently formed metal-superoxide complex attacks the substrate without dissociation from the metal, it must do so at the C-3 position. Second-sphere active-site residues that are positioned to interact with the HPCA and/or bound O2 during catalysis are identified and discussed in the context of current mechanistic hypotheses.     

The mechanism of p21-activated kinase 2 autoactivation

The p21-activated kinases (PAKs) play an important role in diverse cellular processes. PAK2 is activated by autophosphorylation upon binding of small G proteins such as Cdc42 and Rac in the GTP-bound state. However, the mechanism of PAK2 autophosphorylation in vitro is unclear. In the present study, the kinetic theory of the substrate reaction during modification of enzyme activity has been applied to a study of the autoactivation of PAK2. On the basis of the kinetic equation of the substrate reaction during the autophosphorylation of PAK2, the activation rate constants for the free enzyme and enzyme-substrate complex have been determined. The results indicate that 1) in the presence of Cdc42, PAK2 autophosphorylation is a bipartite mechanism, with the regulatory domain autophosphorylated at multiple residues, whereas activation coincides with autophosphorylation of the catalytic domain at Thr-402; 2) the autophosphorylation reactions in regulatory domain are either a nonlimiting step or not required for activation of enzyme; 3) the autophosphorylation at site Thr-402 on the catalytic domain occurs by an intermolecular mechanism and is required for phosphorylation of exogenous substrates examined; 4) binding of the exogenous protein/peptide substrates at the active site of PAK2 has little or no effect on the autoactivation of PAK2, suggesting that multiple regions of PAK2 are involved in the enzyme-substrate recognition. The present method also provides a novel approach for studying autophosphorylation reactions. Since the experimental conditions used resemble more closely the in vivo situation where the substrate is constantly being turned over while the enzyme is being modified, this new method would be particularly useful when the regulatory mechanisms of the reversible phosphorylation reaction toward certain enzymes are being assessed.     

New model for activation of yeast pyruvate decarboxylase by substrate consistent with the alternating sites mechanism: demonstration of the existence of two active forms of the enzyme

Pyruvate decarboxylase from yeast (YPDC, EC 4.1.1.1) exhibits a marked lag phase in the progress curves of product (acetaldehyde) formation. The currently accepted kinetic model for YPDC predicts that, only upon binding of substrate in a regulatory site, a slow activation step converts inactive enzyme into the active form. This allosteric behavior gives rise to sigmoidal steady-state kinetics. The E477Q active site variant of YPDC exhibited hyperbolic initial rate curves at low pH, not consistent with the model. Progress curves of product formation by this variant were S-shaped, consistent with the presence of three interconverting conformations with distinct steady-state rates. Surprisingly, wild-type YPDC at pH < or =5.0 also possessed S-shaped progress curves, with the conformation corresponding to the middle steady state being the most active one. Reexamination of the activation by substrate of wild-type YPDC in the pH range of 4.5-6.5 revealed two characteristic transitions at all pH values. The values of steady-state rates are functions of both pH and substrate concentration, affecting whether the progress curve appears "normal" or S-shaped with an inflection point. The substrate dependence of the apparent rate constants suggested that the first transition corresponded to substrate binding in an active site and a subsequent step responsible for conversion to an asymmetric conformation. Consequently, the second enzyme state may report on "unregulated" enzyme, since the regulatory site does not participate in its generation. This enzyme state utilizes the alternating sites mechanism, resulting in the hyperbolic substrate dependence of initial rate. The second transition corresponds to binding a substrate molecule in the regulatory site and subsequent minor conformational adjustments. The third enzyme state corresponds to the allosterically regulated conformation, previously referred to as activated enzyme. The pH dependence of the Hill coefficient suggests a random binding of pyruvate in a regulatory and an active site of wild-type YPDC. Addition of pyruvamide or acetaldehyde to YPDC results in the appearance of additional conformations of the enzyme.     

A simple method for the determination of individual rate constants for substrate hydrolysis by serine proteases

A simple method is presented for the determination of individual rate constants for substrate hydrolysis by serine proteases and other enzymes with similar catalytic mechanism. The method does not require solvent perturbation like viscosity changes, or solvent isotope effects, that often compromise nonspecifically the activity of substrate and enzyme. The rates of substrate diffusion into the active site (k1), substrate dissociation (k-1), acylation (k2), and deacylation (k3) in the accepted mechanism of substrate hydrolysis by serine proteases are derived from the temperature dependence of the Michaelis-Menten parameters kcat/Km and kcat. The method also yields the activation energies for these molecular events. Application to wild-type and mutant thrombins reveals how the various steps of the catalytic mechanism are affected by Na+-binding and site-directed mutations of the important residues Y225 in the Na+ binding environment and L99 in the S2 specificity site. Extension of this method to other proteases should enable the derivation of detailed information on the kinetic and energetic determinants of protease function.     

X-ray structure of a hydroxylase-regulatory protein complex from a hydrocarbon-oxidizing multicomponent monooxygenase, Pseudomonas sp. OX1 phenol hydroxylase

Phenol hydroxylase (PH) belongs to a family of bacterial multicomponent monooxygenases (BMMs) with carboxylate-bridged diiron active sites. Included are toluene/o-xylene (ToMO) and soluble methane (sMMO) monooxygenase. PH hydroxylates aromatic compounds, but unlike sMMO, it cannot oxidize alkanes despite having a similar dinuclear iron active site. Important for activity is formation of a complex between the hydroxylase and a regulatory protein component. To address how structural features of BMM hydroxylases and their component complexes may facilitate the catalytic mechanism and choice of substrate, we determined X-ray structures of native and SeMet forms of the PH hydroxylase (PHH) in complex with its regulatory protein (PHM) to 2.3 A resolution. PHM binds in a canyon on one side of the (alphabetagamma)2 PHH dimer, contacting alpha-subunit helices A, E, and F approximately 12 A above the diiron core. The structure of the dinuclear iron center in PHH resembles that of mixed-valent MMOH, suggesting an Fe(II)Fe(III) oxidation state. Helix E, which comprises part of the iron-coordinating four-helix bundle, has more pi-helical character than analogous E helices in MMOH and ToMOH lacking a bound regulatory protein. Consequently, conserved active site Thr and Asn residues translocate to the protein surface, and an approximately 6 A pore opens through the four-helix bundle. Of likely functional significance is a specific hydrogen bond formed between this Asn residue and a conserved Ser side chain on PHM. The PHM protein covers a putative docking site on PHH for the PH reductase, which transfers electrons to the PHH diiron center prior to O2 activation, suggesting that the regulatory component may function to block undesired reduction of oxygenated intermediates during the catalytic cycle. A series of hydrophobic cavities through the PHH alpha-subunit, analogous to those in MMOH, may facilitate movement of the substrate to and/or product from the active site pocket. Comparisons between the ToMOH and PHH structures provide insights into their substrate regiospecificities.     

Using substrate analogues to probe the kinetic mechanism and active site of Escherichia coli MenD

MenD catalyzes the thiamin diphosphate-dependent decarboxylative carboligation of α-ketoglutarate and isochorismate. The enzyme is essential for menaquinone biosynthesis in many bacteria and has been proposed to be an antibiotic target. The kinetic mechanism of this enzyme has not previously been demonstrated because of the limitations of the UV-based kinetic assay. We have reported the synthesis of an isochorismate analogue that acts as a substrate for MenD. The apparent weaker binding of this analogue is advantageous in that it allows accurate kinetic experiments at substrate concentrations near K(m). Using this substrate in concert with the dead-end inhibitor methyl succinylphosphonate, an analogue of α-ketoglutarate, we show that MenD follows a ping-pong kinetic mechanism. Using both the natural and synthetic substrates, we have measured the effects of 12 mutations of residues at the active site. The results give experimental support to previous models and hypotheses and allow observations unavailable using only the natural substrate.     

Similar enzyme activation and catalysis in hemocyanins and tyrosinases

This review presents the common features and differences of the type 3 copper proteins with respect to their structure and function. In spite of these differences a common mechanism of activation and catalysis seems to have been preserved throughout evolution. In all cases the inactive proenzymes such as tyrosinase and catecholoxidase are activated by removal of an amino acid blocking the entrance channel to the active site. No other modification at the active site seems to be necessary to enable catalytic activity. Hemocyanins, the oxygen carriers in many invertebrates, also behave as silent inactive enzymes and can be activated in the same way. The molecular basis of the catalytic process is presented based on recent crystal structures of tyrosinase and hemocyanin. Minor conformational differences at the active site seem to decide about whether the active site is only able to oxidize diphenols as in catecholoxidase or if it is also able to o-hydroxylate monophenols as in tyrosinase.     

Crystal structures of two aromatic hydroxylases involved in the early tailoring steps of angucycline biosynthesis

Angucyclines are aromatic polyketides produced in Streptomycetes via complex enzymatic biosynthetic pathways. PgaE and CabE from S. sp PGA64 and S. sp. H021 are two related homo-dimeric FAD and NADPH dependent aromatic hydroxylases involved in the early steps of the angucycline core modification. Here we report the three-dimensional structures of these two enzymes determined by X-ray crystallography using multiple anomalous diffraction and molecular replacement, respectively, to resolutions of 1.8 A and 2.7 A. The enzyme subunits are built up of three domains, a FAD binding domain, a domain involved in substrate binding and a C-terminal thioredoxin-like domain of unknown function. The structure analysis identifies PgaE and CabE as members of the para-hydroxybenzoate hydroxylase (pHBH) fold family of aromatic hydroxylases. In contrast to phenol hydroxylase and 3-hydroxybenzoate hydroxylase that utilize the C-terminal domain for dimer formation, this domain is not part of the subunit-subunit interface in PgaE and CabE. Instead, dimer assembly occurs through interactions of their FAD binding domains. FAD is bound non-covalently in the "in"-conformation. The active sites in the two enzymes differ significantly from those of other aromatic hydroxylases. The volumes of the active site are significantly larger, as expected in view of the voluminous tetracyclic angucycline substrates. The structures further suggest that substrate binding and catalysis may involve dynamic rearrangements of the middle domain relative to the other two domains. Site-directed mutagenesis studies of putative catalytic groups in the active site of PgaE argue against enzyme-catalyzed substrate deprotonation as a step in catalysis. This is in contrast to pHBH, where deprotonation/protonation of the substrate has been suggested as an essential part of the enzymatic mechanism.     

Conformational basis for substrate recognition and regulation of catalytic activity in Staphylococcus aureus nucleoside di-phosphate kinase

Nucleoside diphosphate kinases (NDK) are characterized by high catalytic turnover rates and diverse substrate specificity. These features make this enzyme an effective activator of a pro-drug-an application that has been actively pursued for a variety of therapeutic strategies. The catalytic mechanism of this enzyme is governed by a conserved histidine that coordinates a magnesium ion at the active site. Despite substantial structural and biochemical information on NDK, the mechanistic feature of the phospho-transfer that leads to auto-phosphorylation remains unclear. While the role of the histidine residue is well documented, the other active site residues, in particular the conserved serine remains poorly characterized. Studies on some homologues suggest no role for the serine residue at the active site, while others suggest a crucial role for this serine in the regulation and quaternary association of this enzyme in some species. Here we report the biochemical features of the Staphylococcus aureus NDK and the mutant enzymes. We also describe the crystal structures of the apo-NDK, as a transition state mimic with vanadate and in complex with different nucleotide substrates. These structures formed the basis for molecular dynamics simulations to understand the broad substrate specificity of this enzyme and the role of active site residues in the phospho-transfer mechanism and oligomerization. Put together, these data suggest that concerted changes in the conformation of specific residues facilitate the stabilization of nucleotide complexes thereby enabling the steps involved in the ping-pong reaction mechanism without large changes to the overall structure of this enzyme.     

Chemical modification of the bifunctional regulatory protein of maize leaf pyruvate,orthophosphate dikinase. Evidence for two distinct active sites

The active site(s) of the bifunctional regulatory protein of pyruvate,orthophosphate dikinase catalyze(s) the Pi-dependent activation (dephosphorylation) and ADP-dependent inactivation (phosphorylation) of maize leaf dikinase. The chemical modification studies of the regulatory protein active sites presented in this paper are interpreted as showing the two sites to be physically distinct. Pyridoxal 5'-phosphate and 2-nitro-5-thiocyanatobenzoate (NTCB) selectively inhibit the dikinase activating site, which is protected by the nonprotein substrate, Pi. Phenylglyoxal blocks both the activation and inactivation sites; the former is protected selectively by Pi and the latter by both the nonprotein substrate, ADP, and Pi. The Pi that protects the inactivation site is distinct from the activation substrate. Inhibition studies show Pi to be a parabolic competitive inhibitor of the ADP-dependent inactivation of dikinase, implying that besides substrate Pi, a second phosphate also binds to the regulatory protein. The above chemical modifications are not mutually exclusive; neither NTCB, 5,5'-dithiobis-(2-nitrobenzoate), nor pyridoxal 5'-phosphate blocks subsequent modification of the activation site by phenylglyoxal. Similarly, prior modification with NTCB does not affect modification by pyridoxal 5'-phosphate.     

Conformational gating in ammonia lyases

BackgroundAmmonia lyases are enzymes of industrial and biomedical interest. Knowledge of structure-dynamics-function relationship in ammonia lyases is instrumental for exploiting the potential of these enzymes in industrial or biomedical applications.MethodsWe investigated the conformational changes in the proximity of the catalytic pocket of a 3-methylaspartate ammonia lyase (MAL) as a model system. At this scope, we used microsecond all-atom molecular dynamics simulations, analyzed with dimensionality reduction techniques, as well as in terms of contact networks and correlated motions.ResultsWe identify two regulatory elements in the MAL structure, i.e., the β5-α2 loop and the helix-hairpin-loop subdomain. These regulatory elements undergo conformational changes switching from ‘occluded’ to ‘open’ states. The rearrangements are coupled to changes in the accessibility of the active site. The β5-α2 loop and the helix-hairpin-loop subdomain modulate the formation of tunnels from the protein surface to the catalytic site, making the active site more accessible to the substrate when they are in an open state.ConclusionsOur work pinpoints a sequential mechanism, in which the helix-hairpin-loop subdomain of MAL needs to break a subset of intramolecular interactions first to favor the displacement of the β5-α2 loop. The coupled conformational changes of these two elements contribute to modulate the accessibility of the catalytic site.General significanceSimilar molecular mechanisms can have broad relevance in other ammonia lyases with similar regulatory loops. Our results also imply that it is important to account for protein dynamics in the design of variants of ammonia lyases for industrial and biomedical applications.