Hydrolysis of xylans by a thermostable hybrid xylanase expressed in <Emphasis Type="Italic">Escherichia coli</Emphasis>

Escherichia coli-expressed a hybrid xylanase, Btx, encoded by a designed hybrid xylanase gene btx was purified. The molecular mass of the enzyme was estimated to be 22 kDa. The K _m and k _cat values for Btx were 1.9 mg/ml and 140 s⁻¹, respectively. It hydrolyzed xylan principally to xylobiose and xylotriose, and was functionally similar to family 11 xylanases. As some differences were found in the hydrolytic products between birchwood xylan and wheat bran insoluble xylan, the xylan binding domains in xylanase Btx must have different effects on soluble and insoluble xylan.     

Cloning,purification and characterization of an alkali-stable endoxylanase from thermophilic <Emphasis Type="Italic">Geobacillus</Emphasis> sp. 71

The gene encoding a xylanase from Geobacillus sp. 71 was isolated, cloned, and sequenced. Purification of the Geobacillus sp 7.1 xylanase, XyzGeo71, following overexpression in E. coli produced an enzyme of 47 kDa with an optimum temperature of 75°C. The optimum pH of the enzyme is 8.0, but it is active over a broad pH range. This protein showed the highest sequence identity (93%) with the xylanase from Geobacillus thermodenitrificans NG80-2. XyzGeo71 contains a catalytic domain that belongs to the glycoside hydrolase family 10 (GH10). XyzGeo71 exhibited good pH stability, remaining stable after treatment with buffers ranging from pH 7.0 to 11.0 for 6 h. Its activity was partially inhibited by Al³⁺ and Cu²⁺ but strongly inhibited by Hg²⁺. The enzyme follows Michaelis–Menten kinetics, with K_m and V_max values of 0.425 mg xylan/ml and 500 μmol/min.mg, respectively. The enzyme was free from cellulase activity and degraded xylan in an endo fashion. The action of the enzyme on oat spelt xylan produced xylobiose and xylotetrose.     

Characterization of a xylanase from a thermophilic strain of <Emphasis Type="Italic">Anoxybacillus pushchinoensis</Emphasis> A8

A facultatively anaerobic, thermophilic, xylanolytic bacterium was isolated from a sample collected from the Diyadin Hot Springs, Turkey. According to morphological, biochemical and molecular identification, this new strain was suggested to be representative of the Anoxybacillus pushchinoensis and it was designated as Anoxybacillus pushchinoensis strain A8. It exhibited 97% similarity to 16S rRNA gene sequence of A. pushchinoensis and 77% DNA homology by DNA-DNA hybridization studies. Q-sepharose and CM-sepharose chromatography was used to purify an extracellular xylanase to >90% purity from this species. The enzyme had a molecular mass of approximately 83 kDa. The enzyme showed optimum activity at pH 6.5 and it was 96% stable over a broad pH range of 6.5–11 for 24 hours. The enzyme had optimum activity at 55°C and it was 100% stable at temperature between 50–60°C up to 24 hours. Kinetic characterization of the enzyme was performed at temperature optima (55°C) and V_max and K _m were found to be 59.88 U/mg protein and 0.909 mg/mL, respectively. Oat spelt xylan but not xylooligosaccharides was degraded by the enzyme and xylose was the only product detected from oat xylan degradation. This suggested that the enzyme was an exo-acting xylanase.     

Hyaluronic acid production by recombinant <Emphasis Type="Italic">Lactococcus lactis</Emphasis>

A gene encoding a new xylanase, named xynZG, was cloned by the genome-walking PCR method from the nematophagous fungus Plectosphaerella cucumerina. The genomic DNA sequence of xynZG contains a 780 bp open reading frame separated by two introns with the sizes of 50 and 46 bp. To our knowledge, this would be the first functional gene cloned from P. cucumerina. The 684 bp cDNA was cloned into vector pHBM905B and transformed into Pichia pastoris GS115 to select xylanase-secreting transformants on RBB-xylan containing plate. The optimal secreting time was 3 days at 25°C and enzymatic activities in the culture supernatants reached the maximum level of 362 U ml⁻¹. The molecular mass of the enzyme was estimated to be 19 kDa on SDS-PAGE. The optimal pH and temperature of the purified enzyme is 6 and 40°C, respectively. The purified enzyme is stable at room temperature for at least 10 h. The K _m and V _max values for birchwood xylan are 2.06 mg ml⁻¹ and 0.49 mmol min⁻¹mg⁻¹, respectively. The inhibitory effects of various mental ions were investigated. It is interesting to note that Cu²⁺ ion, which strongly inhibits most other xylanases studied, reduces enzyme activity by only 40%. Furthermore, enzyme activity is unaffected by EDTA even at a concentration of 5 mM.     

Isolation and Characterization of a Cold-Active Xylanase Enzyme from Flavobacterium sp.

Xylan is the major component of hemicellulose, and xylan should be fully utilized to improve the efficiencies of a biobased economy. There are a variety of industrial reaction conditions in which an active xylanase enzyme would be desired. As a result, xylanase enzymes with different activity profiles are of great interest. We isolated a xylanase gene (xyn10) from a Flavobacterium sp. whose sequence suggests that it is a glycosyl hydrolase family 10 member. The enzyme has a temperature optimum of 30°C, is active at cold temperatures, and is thermolabile. The enzyme has an apparent K_m of 1.8 mg/ml and k_cat of 100 sec⁻¹ for beechwood xylan, attacks highly branched native xylan substrates, and does not have activity against glucans.     

Cloning,expression and characterization of glycoside hydrolase family 11 endoxylanase from <Emphasis Type="Italic">Bacillus pumilus</Emphasis> ARA

An endoxylanase gene, xynA, was cloned from Bacillus pumilus ARA and expressed in Escherichia coli. The open reading frame of the xynA gene was 687 bp encoding a signal peptide and a mature xylanase with a molecular mass of 23 kDa. The enzyme was categorized as a glycosyl hydrolase family 11 member based on the sequence analysis of the putative catalytic domain. The recombinant XynA (Bpu XynA) was purified to homogeneity by Ni–NTA and ion exchange chromatography on DEAE–Sepharose FF. The enzyme exhibited highest activity at pH 6.6 and 50°C. The purified Bpu XynA was stable for at least 2 h at 45°C, and retained over 50% residual activity after being incubated at 60°C for 1 h. The activity of the xylanase was not significantly affected by metal ions and EDTA. The K _m and K _cat /K _m of Bpu XynA for oat-spelt xylan were 5.53 mg/ml and 10.14 ml/mg s at 50°C and pH 6.6. The main product of hydrolysis by Bpu XynA was xylooligosaccharide. The results revealed that the consumption of grass xylan by B. pumilus ARA depended on the synergistic reactions of Bpu XynA and Bpu arabinosidase, and that a typical GH11 xylanase e.g. Tla XynA had capability to remove the side chain of xylan. The properties Bpu XynA make it promising for application in the production of Bifidobacterium growth-promoting factors and in feed industry.     

Immobilization of Xylan-Degrading Enzymes from Scytalidium thermophilum on Eudragit L-100

Summary Xylanase from Scytalidium thermophilum was immobilized on Eudragit L-100, a pH sensitive copolymer of methacrylic acid and methyl methacrylate. The enzyme was non-covalently immobilized and the system expressed 70% xylanase activity. The immobilized preparation had broader optimum temperature of activity between 55 and 65 °C as compared to 65 °C in case of free enzyme and broader optimum pH between 6.0 and 7.0 as compared to 6.5 in case of free enzyme. Immobilization increased the t_1/2 of enzyme at 60 °C from 15 to 30 min with a stabilization factor of 2. The K_m and V_max values for the immobilized and free xylanase were 0.5% xylan and 0.89 μmol/ml/min and 0.35% xylan and 1.01 μmol/ml/min respectively. An Arrhenius plot showed an increased value of activation energy for immobilized xylanase (227 kcal/mol) as compared to free xylanase (210 kcal/mol) confirming the higher temperature stability of the free enzyme. Enzymatic saccharification of xylan was also improved by xylanase immobilization.     

Optimized expression of an acid xylanase from <Emphasis Type="Italic">Aspergillus usamii</Emphasis> in <Emphasis Type="Italic">Pichia pastoris</Emphasis> and its biochemical characterization

The xylanase gene xyn II from Aspergillus usamii E001 was placed under the control of an alcohol oxidase promoter (AOX1) in the plasmid pPIC9K and integrated into the genome of a methylotrophic yeast, P. pastoris GS115, by electroporation. His⁺ transformants were screened for on the basis of their resistance to G418 and activity assay. A transformant, P. pastoris GSC12, which showed resistance to over 6 mg G418/ml and highest xylanase activity was selected. Recombinant xylanase was secreted by P. pastoris GSC12 24 h after methanol induction of shake-flask cultures, and reached a final yield of 3139. About 68 U/mg 120 h after the induction. The molecular mass of this xylanase was estimated to be 21 kDa by SDS-PAGE. The optimum pH and temperature were 4.2 and 50 °C, respectively. Xylanase was stable below 50 °C and within pH 3.0–7.0. Its activity was increased by EDTA and Co²⁺ ion and strongly inhibited by Mn²⁺, Li⁺ and Ag⁺ ions. The K _m and V _max values with birchwood xylan as the substrate were found to be 5.56 mg/ml and 216 μmol/mg/min, respectively. This is the first report on expression and characterization of xylanase from A. usamii in P. pastoris. The hydrolysis products consisted of xylooligosaccharides together with a small amount of xylose. This property made the enzyme attractive for industrial purposes, as relatively pure xylooligosaccharides could be obtained.     

Characterization of Cloned Endoxylanase from Cellulomonas sp. NCIM 2353 Expressed in Escherichia coli

A 22-kDa xylanase encoded by a cloned gene (XCs16) of Cellulomonas was purified to homogeneity with an overall yield of 44%. It is a basic protein with a pI of 8.1 and has a K _m and V _max of 3 mg/ml and 1150 μmoles/mg/min, respectively, for oat spelt xylan at 55°C and pH 5.8. Homologous xylanase from Cellulomonas could be identified with antibodies raised against purified xylanase encoded by XCs16. The enzyme from Cellulomonas also exhibited identical temperature and pH optimum and had a molecular weight of 23 kDa. Modification of tryptophan residue of purified xylanase resulted in the loss of xylanase activity. This loss could be reversed by the addition of substrate, indicating the involvement of tryptophan residue in the catalytic site. Received: 12 April 1996 / Accepted: 28 October 1996     

Cloning of a xylanase gene <Emphasis Type="Italic">xyn2A</Emphasis> from rumen fungus <Emphasis Type="Italic">Neocallimastix</Emphasis> sp. GMLF2 in <Emphasis Type="Italic">Escherichia coli</Emphasis> and its partial characterization

Anaerobic fungi belonging to the family Neocallimastigaceae are native inhabitants in the rumen of the most herbivores, such as cattle, sheep and goats. A member of this unique group, Neocallimastix sp. GMLF2 was isolated from cattle feces and screened for its xylanase encoding gene using polymerase chain reaction. The gene coding for a xylanase (xyn2A) was cloned in Escherichia coli and expression was monitored. To determine the enzyme activity, assays were conducted for both fungal xylanase and cloned xylanase (Xyl2A) for supernatant and cell-associated activities. Optimum pH and temperature of the enzyme were found to be 6.5 and 50°C, respectively. The enzyme was stable at 40°C and 50°C for 20 min but lost most of its activity when temperature reached 60°C for 5-min incubation time. Rumen fungal xylanase was mainly released to the supernatant of culture, while cloned xylanase activity was found as cell-associated. Multiple alignment of the amino acid sequences of Xyl2A with published xylanases from various organisms suggested that Xyl2A belongs to glycoside hydrolase family 11.     

Fusion of carbohydrate binding modules from <Emphasis Type="Italic">Thermotoga neapolitana</Emphasis> with a family 10 xylanase from <Emphasis Type="Italic">Bacillus halodurans</Emphasis> S7

Xylanase A of Thermotoga neapolitana contains binding domains both at the N- and C-terminal ends of the catalytic domain. In the N-terminal position it contains two carbohydrate-binding modules (CBM) which belong to family 22. These CBMs bind xylan but not to cellulose. The gene encoding the mature peptide of these CBMs was fused with an alkaline active GH10 xylanase from Bacillus halodurans S7 and expressed in Escherichia coli. The (His)₆ tagged hybrid protein was purified by immobilized metal affinity chromatography and characterized. Xylan binding by the chimeric protein was influenced by NaCl concentration and pH of the binding medium. Binding increased with increasing salt concentration up to 200 mM. Higher extent of binding was observed under acidic conditions. The fusion of the CBM structures enhanced the hydrolytic efficiency of the xylanase against insoluble xylan, but decreased the stability of the enzyme. The optimum temperature and pH for the activity of the xylanase did not change.     

Purification and characterization of a thermophilic alkaline xylanase from thermoalkaliphilic Bacillus sp. strain TAR-1

Thermoalkaliphilic Bacillus sp. strain TAR-1 isolated from soil produced an extracellular xylanase. The enzyme (xylanase R) was purified to homogeneity by ammonium sulfate fractionation and anion-exchange chromatography. The molecular mass of xylanase R was 40 kDa and the isoelectric point was 4.1. The enzyme was most active over the range of pH 5.0 to 10.0 at 50°C. The optimum temperatures for activity were 75°C at pH 7.0 and 70°C at pH 9.0. Xylanase R was stable up to 65°C at pH 9.0 for 30 min in the presence of xylan. Mercury(ll) ion at 1 mM concentration abolished all the xylanase activity. The predominant products of xylan-hydrolysate were xylobiose, xylotriose, and higher oligosaccharides, indicating that xylanase R was an endo-acting enzyme. Xylanase R had a K_m of 0.82 mg/ml and a V_max of 280 μmol min⁻¹ mg⁻¹ for xylan at 50°C and pH 9.0.     

Identification of three distinct Clostridium thermocellum xylanase genes by molecular cloning

Three genes coding for xylanase synthesis in Clostridium thermocellum were cloned and expressed in Escherichia coli. Genomic DNA from Clostridium thermocellum was digested to completion with HindIII, BamHI, and SalI. The fragments were ligated into the corresponding sites of pUC19 and transformed into Escherichia coli. Two of the genes encoded for xylanases which depolymerized xylans but were unable to extensively convert these substrates to reducing sugar. The third gene encoded for an enzyme that extensively hydrolyzed xylan. The insert containing the latter gene was subjected to extensive mapping and was found to encode for a xylanase with a molecular weight of approximately 25,000. The protein product of the cloned gene was obtained in a relatively pure form by heat treatment, ion exchange and gel permeation steps. The enzyme was quite stable to high temperatures with a half-life of 24 h at 70°C.Issued as National Research Council of Canada No. 30545     

Cloning of <Emphasis Type="Italic">Bacillus licheniformis</Emphasis> Xylanase Gene and Characterization of Recombinant Enzyme

Hemicellulose is a major component of lignocellulose biomass. Complete degradation of this substrate requires several different enzymatic activities, including xylanase. We isolated a strain of Bacillus licheniformis from a hot springs environment that exhibited xylanase activity. A gene encoding a 23-kDa xylanase enzyme, Xyn11, was cloned, and the recombinant protein was expressed in an Escherichia coli host and biochemically characterized. The optimum activity of the enzyme was at pH 5-7 and 40-50 degrees C. The enzyme was stable at temperatures up to 50 degrees C. Against birchwood xylan, the enzyme had an apparent K ( m ) of 6.7 mg/mL and V (max) of 379 mumol/min/mg.     

A new acidophilic endo-β-1,4-xylanase from Penicillium oxalicum: cloning,purification, and insights into the influence of metal ions on xylanase activity

A new acidophilic xylanase (XYN11A) from Penicillium oxalicum GZ-2 has been purified, identified and characterized. Synchronized fluorescence spectroscopy was used for the first time to evaluate the influence of metal ions on xylanase activity. The purified enzyme was identified by MALDI TOF/TOF mass spectrometry, and its gene (xyn11A) was identified as an open reading frame of 706 bp with a 68 bp intron. This gene encodes a mature protein of 196 residues with a predicted molecular weight of 21.3 kDa that has the 100 % identity with the putative xylanase from the P. oxalicum 114-2. The enzyme shows a structure comprising a catalytic module family 10 (GH10) and no carbohydrate-binding module family. The specific activities were 150.2, 60.2, and 72.6 U/mg for beechwood xylan, birchwood xylan, and oat spelt xylan, respectively. XYN11A exhibited optimal activity at pH 4.0 and remarkable pH stability under extremely acidic condition (pH 3). The specific activity, K _m and V _max values were 150.2 U/mg, 30.7 mg/mL, and 403.9 μmol/min/mg for beechwood xylan, respectively. XYN11A is a endo-β-1,4-xylanase since it release xylobiose and xylotriose as the main products by hydrolyzing xylans. The activity of XYN11A was enhanced 155 % by 1 mM Fe²⁺ ions, but was inhibited strongly by Fe³⁺. The reason of enhancing the xylanase activity of XYN11A with 1 mM Fe²⁺ treatment may be responsible for the change of microenvironment of tryptophan residues studied by synchronous fluorescence spectrophotometry. Inhibition of the xylanase activity by Fe³⁺ was first time demonstrated to associate tryptophan fluorescence quenching.     

Characterization of thermostable Xyn10A enzyme from mesophilic Clostridium acetobutylicum ATCC 824

A thermostable xylanase gene, xyn10A (CAP0053), was cloned from Clostridium acetobutylicum ATCC 824. The nucleotide sequence of the C. acetobutylicum xyn10A gene encoded a 318-amino-acid, single-domain, family 10 xylanase, Xyn10A, with a molecular mass of 34 kDa. Xyn10A exhibited extremely high (92%) amino acid sequence identity with Xyn10B (CAP0116) of this strain and had 42% and 32% identity with the catalytic domains of Rhodothermus marinus xylanase I and Thermoascus aurantiacus xylanase I, respectively. Xyn10A enzyme was purified from recombinant Escherichia coli and was highly active toward oat-spelt and Birchwood xylan and slightly active toward carboxymethyl cellulose, arabinogalactouronic acid, and various p-nitrophenyl monosaccharides. Xyn10A hydrolyzed xylan and xylooligosaccharides larger than xylobiose to produce xylose. This enzyme was optimally active at 60°C and had an optimum pH of 5.0. This is one of a number of related activities encoded on the large plasmid in this strain.     

Microencapsulated bile salt hydrolase producing <Emphasis Type="Italic">Lactobacillus reuteri</Emphasis> for oral targeted delivery in the gastrointestinal tract

A gene encoding a xylanase, named xynS20, was cloned from the ruminal fungus Neocallimastix patriciarum. The DNA sequence of xynS20 revealed that the gene was 1,008 bp in size and encoded amino acid sequences with a predicted molecular weight of 36 kDa. The amino acid sequence alignment showed that the highest sequence identity (28.4%) is with insect gut xylanase XYL6805. According to the sequence-based classification, a putative conserved domain of glycosyl hydrolase family 11 was detected at the N-terminus of XynS20 and a putative conserved domain of family 1 carbohydrate-binding module (CBM) was observed at the C-terminus of XynS20. An Asn-rich linker sequence was found between the N-terminal catalytic domain and the C-terminal CBM of XynS20. To examine the activity of the gene product, xynS20 gene was cloned as an oleosin-fused protein, expressed in Escherichia coli, affinity-purified by formation of artificial oil bodies, released from oleosin by intein-mediated peptide cleavage, and finally harvested by concentration of the supernatant. The specific activity of purified XynS20 toward oat spelt xylan was 1,982.8 U mg⁻¹. The recombinant XynS20 was stable in the mild acid pH range from 5.0 to 6.0, and the optimum pH was 6.0. The optimal reaction temperature of XynS20 was 45°C; at temperatures below 30 and above 55°C, enzyme activity was less than 50% of that at the optimal temperature.     

Purification and characterization of a thermoalkalophilic xylanase from <Emphasis Type="Italic">Bacillus</Emphasis> sp.

Summary An extracellular xylanase was purified to homogeneity from the culture filtrate of a thermophilic Bacillus sp. The molecular weight of the purified xylanase was 44 kDa, as analysed by SDS/PAGE. The enzyme reaction followed Michaelis–Menten kinetics with K_m^app and V_max values of 0.025 mg/ml and 450 U/mg protein, respectively, as obtained from a Lineweaver–Burk plot. The xylanase contained no other enzyme activity except for the hydrolysis of xylan substrate. The optimal temperature of the enzyme assay was 50 °C. The optimum pH for the xylanase activity was at three peaks 6.5, 8.5 and 10.5, respectively and the enzyme was stable over a broad range of pH from pH 6 to 10.5. Metal ions tested with demetalized enzyme had no effect, with the exception of Hg²⁺ and Pb²⁺ (both strong inhibitors). Inhibition of the enzyme activity by N-bromosuccinimide (amino acid modifier) indicated the role of tryptophan residues in the catalytic function of the enzyme. Due to these outstanding properties, the xylanase of Bacillussp. finds potential applications in biopulping, biobleaching and de-inking of recycled paper and other industrial processes.     

Identification and characterization of a novel xylanase derived from a rice straw degrading enrichment culture

A metagenomic library containing ca. 3.06 × 10⁸ bp insert DNA was constructed from a rice straw degrading enrichment culture. A xylanase gene, umxyn10A, was cloned by screening the library for xylanase activity. The encoded enzyme Umxyn10A showed 58% identity and 73% similarity with a xylanase from Thermobifida fusca YX. Sequence analyses showed that Umxyn10A contained a glycosyl hydrolase family 10 catalytic domain. The gene was expressed in Escherichia coli, and the recombinant enzyme was purified and characterized biochemically. Recombinant Umxyn10A was highly active toward xylan. However, the purified enzyme could slightly hydrolyze β-1,3/4-glucan and β-1,3/6-glucan. Umxyn10A displayed maximal activity toward oat spelt xylan at a high temperature (75°C) and weak acidity (pH 6.5). The K _m and V _max of Umxyn10A toward oat spelt xylan were 3.2 mg ml⁻¹ and 0.22 mmol min⁻¹ mg⁻¹ and were 2.7 mg ml⁻¹ and 1.0 mmol min⁻¹ mg⁻¹ against birchwood xylan, respectively. Metal ions did not appear to be required for the catalytic activity of this enzyme. The enzyme Umxyn10A could efficiently hydrolyze birchwood xylan to release xylobiose as the major product and a negligible amount of xylose. The xylanase identified in this work may have potential application in producing xylobiose from xylan.     

Molecular cloning and heterologous expression of an acid stable xylanase gene from <Emphasis Type="Italic">Alternaria</Emphasis> sp. HB186

A new xylanase gene, named xyn186, was cloned by the genome-walking PCR method from the Alternaria sp. HB186. The sequence of xyn186 contains a 748 bp open reading frame separated by one intron with the size of 52 bp. The cDNA was obtained by DpnI-mediated intron deletion. The cDNA was cloned into pHBM905A and transformed into Pichia pastoris GS115 to screen xylanase-secreting transformants on RBB-xylan plates. The molecular mass of the enzyme was estimated to be 23 kDa on SDS-PAGE. The optimal pH and temperature of the purified enzyme is 6 and 50°C, respectively. The K _m and V _max valued for birchwood xylan are 1.404 mg ml⁻¹ and 0.2748 mmol min⁻¹ mg⁻¹, respectively. The inhibitory effects of various metal ions were investigated, Cu²⁺ and Hg²⁺ ions inhibited most of the enzyme activity. The gene copy number of xyn186 in the genome of P. pastoris was estimated as two by the Real-time PCR. To date, xyn186 gene is the first xylanase gene cloned from the genus Alternaria.