Phosphoenolpyruvate carboxylase from Acetobacter aceti

In Acetobacter aceti growing on pyruvate as the only source of carbon and energy, oxaloacetate (OAA) is produced by a phosphoenolpyruvate (PEP) carboxylase (EC 4.1.1.31). The enzyme was purified 122-fold and a molecular weight of about 380,000 was estimated by gel filtration.The optimum pH was 7.5 and the K _m values for PEP and NaHCO₃ were 0.49 mM and about 3 mM, respectively. The enzyme needed a divalent cation; the K _m for Mn²⁺, Co²⁺ and Mg²⁺ were 0.12, 0.26 and 0.77 mM, respectively. Maximal activity was only obtained with Mg²⁺. Mn²⁺ and Co²⁺ became inhibitory at high concentrations.The activity was inhibited by succinate and, to a lesser extent, by fumarate, citrate, -ketoglutarate, aspartate and glutamate.As compared with the corresponding enzyme from A. xylinum, the PEP carboxylase of A. aceti showed the following differences: a) It had an absolute requirement for acetyl CoA (K _a 0.18 mM) or propionyl CoA (K _a 0.2 mM). b) It was not affected by ADP. c) It was sensitive to thiol blocking agents.Abbreviations PEP phosphoenolpyruvate - OAA oxaloacetate - MW molecular weight - TEMG buffer 50 mM Tris-HCl, pH 7.5, 1 mM EDTA, 5 mM MgCl₂, 1 mM glutathione - HEPES N-2-hydroxyethylpiperazine-N-ethanesulfonic acid     

Pyruvate,orthophosphate dikinase from Acetobacter aceti

A pyruvate, orthophosphate dikinase (EC 2.7.9.1) has been isolated from Acetobacter aceti grown on pyruvate as the only source of carbon and energy. The enzyme was purified 65-fold, and its molecular weight was determined to be about 330,000 by gel filtration.The optimum pH was 8.0 in the forward direction [phosphoenolpyruvate (PEP) formation] and 7.1 for the backward reaction (pyruvate production). In both directions Mg²⁺ was required (forward K _m 1.70 mM; reverse K _m 0.87 mM) and no other divalent cation was able to replace it. The K _m values for pyruvate, ATP, and P_i were 27 M, 0.20 mM, and 0.83 mM, respectively, in the forward direction. The K _m values for PEP, AMP, and PP_i were 0.13 mM, 6 M, and 62 M, respectively, for the reverse reaction. The substrate-product pairs pyruvate-PEP, ATP-AMP, P_i-PP_i were competitive inhibitors to each other in both directions. These product inhibition studies suggest for the enzyme from A. aceti nonclassical three-site Tri (Uni Uni) Ping-Pong kinetics.Abbreviations PEP phosphoenolpyruvate - OAA oxaloacetate - MW molecular weight - SDS sodium dodecyl sulphate - TEMG buffer 50 mM Tris-HCl, pH 7.5, 1 mM EDTA, 5 mM MgCl₂, 1 mM glutathione     

Glucose metabolism in Acetobacter aceti

Acetobacter aceti NCIB 8554 grows on a minimal medium with ethanol but not with glucose as carbon and energy source. Addition of glucose to a wild type culture on ethanol has no influence on growth of the organism. Growth of a glucose sensitive mutant A5 is inhibited by the addition of glucose until all glucose has disappeared from the medium. In order to determine the routes by which glucose is metabolised in wild type and mutant, radiorespirometric, enzymatic, and uptake experiments have been performed. For the radiorespirometric experiments of the continuous substrate feeding type an apparatus has been constructed.Of the glucose entering the cells about 30% is excreted as gluconate and 6% metabolised with liberation of C-1 as CO₂. The rest is accumulated intracellularly. No differences were found between wild type and mutant.Under different growth conditions and with different enzymatic assay methods no pyruvate kinase activity (EC 2.7.1.40) could be detected. This might explain the inability of A. aceti to grow on glucose.Abbreviations PPO 2,5-diphenyloxazole - DM-POPOP 2,2-p-phenylene bis(4-methyl-5-phenyloxazole) - TCA trichloroacetic acid     

The Rep20 Replication Initiator From the pAG20 Plasmid of Acetobacter aceti

In the previously isolated pAG20 plasmid from the Acetobacter aceti CCM3610 strain, the Rep20 protein was characterized as a main replication initiator. The pAG20 plasmid origin was localized in the vicinity of the rep20 gene and contained two 21-nucleotide-long iteron sequences, two 13-nucleotide-long direct repeats, and a DnaA-binding site. Electrophoretic mobility shift assay and nonradioactive fragment analysis confirmed that the Rep20 protein interacted with two direct repeats (5′-TCCAAATTTGGAT′-3′) and their requirement during plasmid replication was verified by mutagenesis. Although the association could not be validated of the DnaA protein of from the host cells of Escherichia coli with the plasmid-encoded replication initiator that usually occurs during replication initiation, Rep20 was able to form dimeric structures by which it could bind the sequence of the rep20 gene and autoregulate its own expression. Targeted mutagenesis of the Rep20 protein revealed the importance of the third α-helix and ⁶³Lys, specifically during DNA binding. The second, closely adjacent β-sheet also took part in this process in which ⁵²Asn played a significant role.     

Isolation and sequencing of the replication region of plasmid pBFp1 isolated from a marine biofilm

A 24 kb plasmid, pBFp1, encoding mercury resistance was previously isolated from a marine biofilm. Isolation and sequencing of a 4280 bp DNA fragment containing the plasmid replicon (rep-pBFp1) revealed a putative open reading frame encoding a RepA protein and an oriV-like region containing an A+T rich sub-region, iterons, and DnaA boxes. Sequence comparisons showed significant similarities to the incW plasmid pSa both for the RepA amino acid sequence and in the iteron DNA sequence. Plasmid pBFp1 was also shown to be incompatible with pSa in standard incompatibility testing. A probe from the repA gene of pBFp1 was further made and tested on a collection of plasmids exogenously isolated from marine habitats in a previous study.     

The inhibition of acetate oxidation by ethanol in Acetobacter aceti

Ethanol grown Acetobacter aceti differed from acetate grown. In ethanol grown cells, acetate uptake, caused by the oxidation of acetate, was completely inhibited by ethanol, in acetate grown cells only to 20%. This was correlated with a 65-fold higher specific activity of the membrane bound NAD(P)-independent alcohol dehydrogenase in ethanol grown than in acetate grown cells. In comparison with ethanol grown cells, acetate grown cells showed a 3-fold higher acetate respiration rate and 3-fold higher specific activities of some tricarboxylic acid cycle enzymes tested. Both adaptations were due to induction by the homologous and not to repression by the heterologous growth substrate. A. aceti showed a membrane bound NAD(P)-independent malate dehydrogenase and no activity of a soluble NAD(P)-dependent one, as was known before from A. xylinum. A hypothesis was proposed explaining the observed inhibition of malate dehydrogenase and of functioning of the tricarboxylic acid cycle in the presence of ethanol or butanol or glucose by a competition of two electron currents for a common link in the convergent electron transport chains. The electrons coming from the quinoproteins, alcohol dehydrogenase and glucose dehydrogenase on the one side and those coming from the flavoproteins, malate dehydrogenase and succinate dehydrogenase via ubiquinonecytochrome c reductase on the other side are meeting at cytochrome c. Here the quinoproteins may be favoured by higher affinity and so inhibit the flavoproteins. Inhibition could be alleviated in the cell free system by increasing the oxygen supply.Dedicated to Professor Carl Martius on the occasion of his 80th birthday, March 1st 1986     

Characterization of a cryptic plasmid pPZZ84 from Bacillus pumilus

The complete nucleotide sequence of a cryptic plasmid pPZZ84 from Bacillus pumilus strain ZZ84 was determined. Plasmid pPZZ84 is 6817 bp long with GC content of 36.7%. Seven putative open reading frames were identified. ORF7 shows 91% and 90% amino acid identity with rep proteins of pSH1452 and pPL1, respectively, members of rolling-circle replication (RCR) pC194-family. A typical pC194-family double strand origin (dso), a single-stranded origin (sso) and rap (regulator aspartate phosphatase) proteins were also identified in the plasmid. These results imply that pPZZ84 belongs to the Bacillus subtilis species group of small rolling circle (BsSRC) replicating plasmids. The plasmid copy number of pPZZ84 in B. pumilus ZZ84 was estimated to be 46 per cell, more than that of other BsSRC plasmids in their hosts.     

High-yielding plasmid extraction method from acidophilic heterotrophic bacteria of the genus Acidiphilium

Plasmid yield from Acidiphilium strains always had been poor following various standard methods. We adopted some simple modifications in the alkaline lysis procedure to get a better yield of plasmid from these bacteria. An approximately 10- to 20-fold increase in the plasmid yield was achieved when harvested Acidiphilium cells were preincubated 16-20 h at pH 6 in nitrogen-free medium. Another independent approach showed that freezing (-18 to -20 degrees C) of the harvested cells initially and at two subsequent steps in the alkaline lysis procedure of plasmid DNA extraction improved the yield further by 1.5- to 3-fold. The combination of these changes yielded at least 15- to 30-fold more plasmid from various Acidiphilium strains as compared with standard methods.     

The internal pH of Acetobacterium wieringae and Acetobacter aceti during growth and production of acetic acid

The intracellular pH was measured in growing Acetobacterium wieringae and Acetobacter aceti with an acid equilibrium distribution method. [¹⁴C]-acetylsalicylic acid, [¹⁴C-benzoic acid and [¹⁴C]-acetic acid were used as pH-indicators. The extracellular pH of Acetobacterium wieringae decreased from 7.0 to 5.0 during growth; accordingly, the intracellular pH changed from 7.1 to 5.5, and a pH between 0.1 and 0.65 (interior more alkaline) was maintained. Corresponding results were obtained for Acetobacter aceti. The external pH and the internal pH decreased in parallel from 6.2 to 3.5 and from 5.8 to 3.9, respectively.This demonstrates that neither the anaerobic nor the aerobic acetogen was able to maintain a large pH in the presence of high concentrations of acetic acid.     

A method for plasmid purification directly from yeast

A rapid technique for purifying plasmids from yeast Saccharomyces cerevisiae is described that yields high-quality DNA suitable for bacterial transformation, yeast transformation, and direct DNA sequencing. The method requires only small culture volumes and proprietary bacterial plasmid miniprep kits that allow one to simultaneously prepare a large number of samples in a very short period of time while avoiding the use of toxic organic chemicals. Both yeast single-copy CEN/ARS and high-copy 2micro shuttle plasmids can be isolated using this method. This technique is useful for plasmid purification from yeast two-hybrid experiments as well as yeast genetics and molecular biology experiments.     

Isolation and sequence analysis of a small cryptic plasmid pRK10 from a corrosion inhibitor degrading strain Serratia marcescens ACE2

The nucleotide sequence of a smallest cryptic plasmid pRK10 of Serratia marcescens ACE2 was determined. When compared to the all other plasmids reported so far from S. marcescens in sizes of over 70 kb, pRK10 is only 4241 bp long with 53% G + C content and has five coding sequences representing a coding percentage of 65.41. This small plasmid consists of one Tdh gene, four mobilization genes, mobCABD, and an origin of replication homologous to those of ColE1-type plasmids. Analysis of the five open reading frames identified on the plasmid suggests the presence of genes involved in replication and mobilization containing sequences homologous to the bom region and mobCABD genes of ColE1 and Tdh from Acinetobacter baumannii str. AYE. Results also indicate that pRK10 does not encode any gene for antibiotic/heavy metal resistance. Copy number and incompatibility of the plasmid with plasmids of ColE1 origin of replication was determined and it is quite stable in its natural host as well as in Escherichia coli DH5α. This relatively small plasmid will be useful for construction of shuttle vectors to facilitate the genetic analysis.     

Identification of the replication region of Lactobacillus acidophilus plasmid pLA103

Abstract The structure of the region necessary for replication of the plasmid pLA103 from Lactobacillus acidophilus TK8912 has been characterized. Sequence analysis revealed that the replication region contained an open reading frame (OrfA) encoding a 282-amino acid peptide preceded by a 22-bp tandem repeat sequence region. The predicted OrfA protein showed homology to the replication protein of a plasmid from Pediococcus halophilus . The plasmid containing the repeat sequence region preceding OrfA was able to replicate in the Lactobacillus host when provided with OrfA in trans , suggesting that the repeat sequence region contains the origin sequence essential for the pLA103 replication.     

Isolation and characterization of pHW15, a small cryptic plasmid from Rahnella genomospecies 2

A small cryptic plasmid designated pHW15 was isolated from Rahnella genomospecies 2 WMR15 and its complete nucleotide sequence was determined. The plasmid contained 3002 bp with a G+C content of 47.4%. The origin of replication was identified by deletion analysis as a region of about 600 bp. This region had an identity of 70% to the replication origin of the ColE1 plasmid at the nucleotide level. Sequence analysis revealed the typical elements: RNA I, RNA II and their corresponding promoters, a sequence allowing hybridisation of RNA II to the DNA and favouring processing by RNaseH, a single-strand initiation determinant (ssi) that allows initiation of lagging-strand synthesis, and a terH sequence required for termination of lagging-strand synthesis. The plasmid contained three expressed open reading frames, one of which showed homology to a ColE1 plasmid-encoded protein. Furthermore, a multimer resolution site was identified by sequence analysis. Its deletion resulted in formation of plasmid multimers during growth leading to an increased plasmid loss rate.     

Evaluating metabolic stress and plasmid stability in plasmid DNA production by Escherichia coli

In the context of recombinant DNA technology, the development of feasible and high-yielding plasmid DNA production processes has regained attention as more evidence for its efficacy as vectors for gene therapy and DNA vaccination arise. When producing plasmid DNA in Escherichia coli, a number of biological restraints, triggered by plasmid maintenance and replication as well as culture conditions are responsible for limiting final biomass and product yields. This termed "metabolic burden" can also cause detrimental effects on plasmid stability and quality, since the cell machinery is no longer capable of maintaining an active metabolism towards plasmid synthesis and the stress responses elicited by plasmid maintenance can also cause increased plasmid instability. The optimization of plasmid DNA production bioprocesses is still hindered by the lack of information on the host metabolic responses as well as information on plasmid instability. Therefore, systematic and on-line approaches are required not only to characterise this "metabolic burden" and plasmid stability but also for the design of appropriate metabolic engineering and culture strategies. The monitoring tools described to date rapidly evolve from laborious, off-line and at-line monitoring to online monitoring, at a time-scale that enables researchers to solve these bioprocessing problems as they occur. This review highlights major E. coli biological alterations caused by plasmid maintenance and replication, possible causes for plasmid instability and discusses the ability of currently employed bioprocess monitoring techniques to provide information in order to circumvent metabolic burden and plasmid instability, pointing out the possible evolution of these methods towards online bioprocess monitoring.