Isolation and Characterization of Brewer's Yeast Variants with Improved Fermentation Performance under High-Gravity Conditions

To save energy, space, and time, today's breweries make use of high-gravity brewing in which concentrated medium (wort) is fermented, resulting in a product with higher ethanol content. After fermentation, the product is diluted to obtain beer with the desired alcohol content. While economically desirable, the use of wort with an even higher sugar concentration is limited by the inability of brewer's yeast (Saccharomyces pastorianus) to efficiently ferment such concentrated medium. Here, we describe a successful strategy to obtain yeast variants with significantly improved fermentation capacity under high-gravity conditions. We isolated better-performing variants of the industrial lager strain CMBS33 by subjecting a pool of UV-induced variants to consecutive rounds of fermentation in very-high-gravity wort (>22° Plato). Two variants (GT336 and GT344) showing faster fermentation rates and/or more-complete attenuation as well as improved viability under high ethanol conditions were identified. The variants displayed the same advantages in a pilot-scale stirred fermenter under high-gravity conditions at 11°C. Microarray analysis identified several genes whose altered expression may be responsible for the superior performance of the variants. The role of some of these candidate genes was confirmed by genetic transformation. Our study shows that proper selection conditions allow the isolation of variants of commercial brewer's yeast with superior fermentation characteristics. Moreover, it is the first study to identify genes that affect fermentation performance under high-gravity conditions. The results are of interest to the beer and bioethanol industries, where the use of more-concentrated medium is economically advantageous.     

Influence of valine and other amino acids on total diacetyl and 2,3-pentanedione levels during fermentation of brewer’s wort

Undesirable butter-tasting vicinal diketones are produced as by-products of valine and isoleucine biosynthesis during wort fermentation. One promising method of decreasing diacetyl production is through control of wort valine content since valine is involved in feedback inhibition of enzymes controlling the formation of diacetyl precursors. Here, the influence of valine supplementation, wort amino acid profile and free amino nitrogen content on diacetyl formation during wort fermentation with the lager yeast Saccharomyces pastorianus was investigated. Valine supplementation (100 to 300 mg L^?1) resulted in decreased maximum diacetyl concentrations (up to 37 % lower) and diacetyl concentrations at the end of fermentation (up to 33 % lower) in all trials. Composition of the amino acid spectrum of the wort also had an impact on diacetyl and 2,3-pentanedione production during fermentation. No direct correlation between the wort amino acid concentrations and diacetyl production was found, but rather a negative correlation between the uptake rate of valine (and also other branched-chain amino acids) and diacetyl production. Fermentation performance and yeast growth were unaffected by supplementations. Amino acid addition had a minor effect on higher alcohol and ester composition, suggesting that high levels of supplementation could affect the flavour profile of the beer. Modifying amino acid profile of wort, especially with respect to valine and the other branched-chain amino acids, may be an effective way of decreasing the amount of diacetyl formed during fermentation.     

Isolation and characterization of brewer's yeast variants with improved fermentation performance under high-gravity conditions

To save energy, space, and time, today's breweries make use of high-gravity brewing in which concentrated medium (wort) is fermented, resulting in a product with higher ethanol content. After fermentation, the product is diluted to obtain beer with the desired alcohol content. While economically desirable, the use of wort with an even higher sugar concentration is limited by the inability of brewer's yeast (Saccharomyces pastorianus) to efficiently ferment such concentrated medium. Here, we describe a successful strategy to obtain yeast variants with significantly improved fermentation capacity under high-gravity conditions. We isolated better-performing variants of the industrial lager strain CMBS33 by subjecting a pool of UV-induced variants to consecutive rounds of fermentation in very-high-gravity wort (>22 degrees Plato). Two variants (GT336 and GT344) showing faster fermentation rates and/or more-complete attenuation as well as improved viability under high ethanol conditions were identified. The variants displayed the same advantages in a pilot-scale stirred fermenter under high-gravity conditions at 11 degrees C. Microarray analysis identified several genes whose altered expression may be responsible for the superior performance of the variants. The role of some of these candidate genes was confirmed by genetic transformation. Our study shows that proper selection conditions allow the isolation of variants of commercial brewer's yeast with superior fermentation characteristics. Moreover, it is the first study to identify genes that affect fermentation performance under high-gravity conditions. The results are of interest to the beer and bioethanol industries, where the use of more-concentrated medium is economically advantageous.     

Physiological characterization of brewer’s yeast in high-gravity beer fermentations with glucose or maltose syrups as adjuncts

High-gravity brewing, which can decrease production costs by increasing brewery yields, has become an attractive alternative to traditional brewing methods. However, as higher sugar concentration is required, the yeast is exposed to various stresses during fermentation. We evaluated the influence of high-gravity brewing on the fermentation performance of the brewer’s yeast under model brewing conditions. The lager brewer’s strain Weihenstephan 34/70 strain was characterized at three different gravities by adding either glucose or maltose syrups to the basic wort. We observed that increased gravity resulted in a lower specific growth rate, a longer lag phase before initiation of ethanol production, incomplete sugar utilization, and an increase in the concentrations of ethyl acetate and isoamyl acetate in the final beer. Increasing the gravity by adding maltose syrup as opposed to glucose syrup resulted in more balanced fermentation performance in terms of higher cell numbers, respectively, higher wort fermentability and a more favorable flavor profile of the final beer. Our study underlines the effects of the various stress factors on brewer’s yeast metabolism and the influence of the type of sugar syrups on the fermentation performance and the flavor profile of the final beer.     

Monitoring the influence of high-gravity brewing and fermentation temperature on flavour formation by analysis of gene expression levels in brewing yeast

During fermentation, the yeast Saccharomyces cerevisiae produces a broad range of aroma-active substances, which are vital for the complex flavour of beer. In order to obtain insight into the influence of high-gravity brewing and fermentation temperature on flavour formation, we analysed flavour production and the expression level of ten genes (ADH1, BAP2, BAT1, BAT2, ILV5, ATF1, ATF2, IAH1, EHT1 and EEB1) during fermentation of a lager and an ale yeast. Higher initial wort gravity increased acetate ester production, while the influence of higher fermentation temperature on aroma compound production was rather limited. In addition, there is a good correlation between flavour production and the expression level of specific genes involved in the biosynthesis of aroma compounds. We conclude that yeasts with desired amounts of esters and higher alcohols, in accordance with specific consumer preferences, may be identified based on the expression level of flavour biosynthesis genes. Moreover, these results demonstrate that the initial wort density can determine the final concentration of important volatile aroma compounds, thereby allowing beneficial adaptation of the flavour of beer.     

Improved Fermentation Performance of a Lager Yeast after Repair of Its AGT1 Maltose and Maltotriose Transporter Genes

The use of more concentrated, so-called high-gravity and very-high-gravity (VHG) brewer''s worts for the manufacture of beer has economic and environmental advantages. However, many current strains of brewer''s yeasts ferment VHG worts slowly and incompletely, leaving undesirably large amounts of maltose and especially maltotriose in the final beers. α-Glucosides are transported into Saccharomyces yeasts by several transporters, including Agt1, which is a good carrier of both maltose and maltotriose. The AGT1 genes of brewer''s ale yeast strains encode functional transporters, but the AGT1 genes of the lager strains studied contain a premature stop codon and do not encode functional transporters. In the present work, one or more copies of the AGT1 gene of a lager strain were repaired with DNA sequence from an ale strain and put under the control of a constitutive promoter. Compared to the untransformed strain, the transformants with repaired AGT1 had higher maltose transport activity, especially after growth on glucose (which represses endogenous α-glucoside transporter genes) and higher ratios of maltotriose transport activity to maltose transport activity. They fermented VHG (24° Plato) wort faster and more completely, producing beers containing more ethanol and less residual maltose and maltotriose. The growth and sedimentation behaviors of the transformants were similar to those of the untransformed strain, as were the profiles of yeast-derived volatile aroma compounds in the beers.The main fermentable sugars in brewer''s wort are maltose (ca. 60% of the total), maltotriose (ca. 25%), and glucose (ca. 15%). In traditional brewery fermentations, worts of about 11° Plato (°P) are used, corresponding to a total fermentable sugar concentration of about 80 g · liter⁻¹. Many modern breweries ferment high-gravity worts (15 to 17°P), and there are efforts to raise the concentration to 25°P, corresponding to a total sugar concentration of about 200 g · liter⁻¹. Industrial use of such very-high-gravity (VHG) worts is attractive because it offers increased production capacity from the same-size brew house and fermentation facilities, decreased energy consumption, and decreased labor, cleaning, and effluent costs (34, 35).Whereas glucose, which is used first, is transported into yeast cells by facilitated diffusion, the α-glucosides maltose and maltotriose are carried by proton symporters (2, 26, 39). Maltose transport seems to have a high level of control over the fermentation rate. Thus, during the early and middle stages of fermentation of brewer''s wort by a lager yeast, the specific rate of maltose consumption was the same as the specific zero-trans maltose uptake rate measured off line with each day''s yeast in each day''s wort spiked with [¹⁴C]maltose (27). Furthermore, introducing a constitutive MAL61 (maltose transporter) gene into a brewer''s yeast on a multicopy plasmid accelerated the fermentation of high-gravity worts (17). Maltotriose is the last sugar to be used in brewing fermentations, and significant amounts of residual maltotriose sometimes remain in beer, causing economic losses (lower yield of ethanol on wort carbohydrate) and possibly undesirable organoleptic effects. The problem of residual sugars in beer is more serious when high-gravity and VHG worts are used. Some, but not all, maltose transporters can also carry maltotriose. The MALx1 genes (x = 1 to 4 and 6) encode transporters that carry maltose efficiently but are generally believed to have little or no activity toward maltotriose (1, 3, 13, 30), although substantial activity toward maltotriose was reported by Day et al. (4). Some yeast strains contain a gene 57% identical to MAL11 that is usually known as AGT1 but is recorded in the Saccharomyces Genome Database (SGDB) as MAL11. The Agt1 transporter has relatively high activity toward maltotriose, as well as maltose (13), and similar K_m values (4 to 5 mM) for these two substrates (4). Alves et al. (1) found that the specific deletion of AGT1 from several Saccharomyces cerevisiae strains also containing at least one MALx1 gene (MAL21, MAL31, and/or MAL41) abolished their ability to transport maltotriose but did not decrease their maltose transport activity. These results supported the belief that the Mal21, Mal31, and Mal41 transporters cannot carry maltotriose, though it remains possible that there are differences between Malx1 transporters from different strains. The same group has also shown (33) that overexpression of AGT1 on a multicopy plasmid in an industrial yeast strain with a very limited ability to ferment maltotriose provided the strain with increased maltotriose uptake activity and the ability to ferment maltotriose efficiently. In 2005, a novel kind of α-glucoside transporter was independently found by two groups (6, 30) in some industrial strains of brewer''s, baker''s, and distiller''s yeasts. These transporters are coded by MTT1 (also called MTY1) genes, which are 90 and 54% identical to the MAL31 and AGT1 genes, respectively. The Mtt1 transporters have high activity toward maltotriose and are the only known α-glucoside transporters with lower K_m values for maltotriose than for maltose (30).Before the discovery of the MTT1 genes, Vidgren et al. (36) sequenced AGT1 genes from two apparently unrelated lager strains and two apparently unrelated ale strains of brewer''s yeast. Surprisingly, at that time (because other maltotriose transporters were not known), the AGT1 genes from the lager strains contained an insertion of one nucleotide, resulting in a premature stop codon, and encoded a truncated, nonfunctional 394-amino-acid polypeptide, whereas those from the ale strains encoded full-length 616-amino-acid transporters. This premature stop codon was later shown (37) to be present in AGT1 genes from all eight of the lager strains tested but was not in any of the four ale strains tested, whereas MTT1 genes were present in all of the lager strains tested but in none of the ale strains tested.In the present work, we have tested whether lager fermentations can be accelerated and residual maltotriose levels decreased by repairing the defective AGT1 genes of lager strains with appropriate DNA sequences from ale strains. Furthermore, the MALx1 and AGT1 genes are repressed by glucose and induced by α-glucosides (9, 16, 19, 25), so that replacing the native AGT1 promoter with a constitutive S. cerevisiae promoter might also increase α-glucoside transport activity and accelerate wort fermentations. The objectives of the present work were to confirm that α-glucoside transport has a high level of control over the rate and extent of wort fermentation and to create a genetically modified lager yeast strain that has improved fermentation performance but contains only Saccharomyces DNA.     

Proteases supplementation to high gravity worts enhances fermentation performance of brewer's yeast

Nitrogen limitation, particularly prevailing in the case of high gravity beer brewing, results in poor yeast viability and even stuck or sluggish fermentations. Although wort contains abundant proteins and longer chain peptides, brewer's yeast does not assimilate them due to the fact that cells hardly secrete proteases during fermentation. The objective of this study was to investigate the possibility for utilizing unavailable nitrogen from two types of high gravity worts (20 °P and 24 °P) by adding three food-grade commercial proteases (Neutrase, Flavorzyme and Protamex) at the beginning of fermentations, respectively. Results showed that proteases supplementation significantly increased the FAN level and thus the amount of cell suspension in the later stages of fermentations (ca. 10 days later for 20 °P and 25 days later for 24 °P) (p < 0.05). Among the studied three proteases, we found that fermentations with Flavorzyme supplementation exhibited the best fermentation performance in terms of significantly improved wort fermentability, higher ethanol yield and flavor volatiles formation (p < 0.05). Furthermore, the foam of final beers produced by adding proteases was as stable as that of the control at each of the corresponding gravities.     

A comparative study on physiological activities of lager and ale brewing yeasts under different gravity conditions

High gravity (HG) or very high gravity (VHG) brewing has become popular in modern breweries due to its economic and product quality advantages. However, there are the negative impacts such as the fermentation performance of brewer??s yeast in HG or VHG wort, which are closely related to changes in cell physiological activity. In the present study, 3 kinds of worts, with different gravities, were used to examine the systematic effects on fermentation performance and physiological activity of lager yeast FBY009505 (Saccharomyces pastorianus) and ale yeast FBY0099 (Saccharomyces cerevisiae), as well as the resulting beer flavor. Results showed that the responses of FBY009505 and FBY0099 to the HG or VHG worts were similar. The specific fermentation rate and viability of cropped yeast of FBY009505 and FBY0099 were decreased with increasing wort gravity. The increased wort gravity resulted in the increase of energy charge and the decrease of ??-glucosides transport rate and glycolytic enzyme activities. Moreover, the environmental stresses in the HG or VHG wort showed a higher inhibitory activity against ??-glucoside transport than glycolytic enzymes. The content of intracellular trehalose and glycerol of FBY009505 and FBY0099 increased with the increase in wort gravity. The results from this study provided a potential means to systematically understand the physiology of brewer??s yeast under HG or VHG conditions.     

Multiple α-Glucoside Transporter Genes in Brewer’s Yeast

Maltose and maltotriose are the two most abundant fermentable sugars in brewer’s wort, and the rate of uptake of these sugars by brewer’s yeast can have a major impact on fermentation performance. In spite of this, no information is currently available on the genetics of maltose and maltotriose uptake in brewing strains of yeast. In this work, we studied 30 brewing strains of yeast (5 ale strains and 25 lager strains) with the aim of examining the alleles of maltose and maltotriose transporter genes contained by them. To do this, we hybridized gene probes to chromosome blots. Studies performed with laboratory strains have shown that maltose utilization is conferred by any one of five unlinked but highly homologous MAL loci (MAL1 to MAL4 and MAL6). Gene 1 at each locus encodes a maltose transporter. All of the strains of brewer’s yeast examined except two were found to contain MAL11 and MAL31 sequences, and only one of these strains lacked MAL41. MAL21 was not present in the five ale strains and 12 of the lager strains. MAL61 was not found in any of the yeast strains. In three of the lager strains, there was evidence that MAL transporter gene sequences occurred on chromosomes other than those known to carry MAL loci. Sequences corresponding to the AGT1 gene, which encodes a transporter of several α-glucosides, including maltose and maltotriose, were detected in all but one of the yeast strains. Homologues of AGT1 were identified in three of the lager strains, and two of these homologues were mapped, one to chromosome II and the other to chromosome XI. AGT1 appears to be a member of a family of closely related genes, which may have arisen in brewer’s yeast in response to selective pressure.     

Inactivation of MXR1 Abolishes Formation of Dimethyl Sulfide from Dimethyl Sulfoxide in Saccharomyces cerevisiae

Dimethyl sulfide (DMS) is a sulfur compound of importance for the organoleptic properties of beer, especially some lager beers. Synthesis of DMS during beer production occurs partly during wort production and partly during fermentation. Methionine sulfoxide reductases are the enzymes responsible for reduction of oxidized cellular methionines. These enzymes have been suggested to be able to reduce dimethyl sulfoxide (DMSO) as well, with DMS as the product. A gene for an enzymatic activity leading to methionine sulfoxide reduction in Saccharomyces yeast was recently identified. We confirmed that the Saccharomyces cerevisiae open reading frame YER042w appears to encode a methionine sulfoxide reductase, and propose the name MXR1 for the gene. We found that Mxr1p catalyzes reduction of DMSO to DMS and that an mxr1 disruption mutant cannot reduce DMSO to DMS. Mutant strains appear to have unchanged fitness under several laboratory conditions, and in this paper I hypothesize that disruption of MXR1 in brewing yeasts would neutralize the contribution of the yeast to the DMS content in beer.     

Sequential Use of Nitrogen Compounds by Saccharomyces cerevisiae during Wine Fermentation: a Model Based on Kinetic and Regulation Characteristics of Nitrogen Permeases

The efficiency of nitrogen use is a key determinant of the completion of alcoholic fermentation. We analyzed the kinetics of consumption of 18 nitrogen compounds by 14 Saccharomyces cerevisiae strains of various origins in a synthetic medium that mimicked a grape must. The kinetic profiles of total nitrogen consumption were diverse, but the order of nitrogen source consumption was similar for all strains. The nitrogen compounds could be classified into three groups, according to their order of use: prematurely consumed (Lys), early consumed (Asp, Thr, Glu, Leu, His, Met, Ile, Ser, Gln, and Phe), and late consumed (ammonium, Val, Arg, Ala, Trp, and Tyr). The initial concentrations of these compounds did not alter the order in which they were consumed, except for arginine and ammonium. Early consumed amino acids are transported by specific permeases under Ssy1p-Ptr3p-Ssy5 (SPS)-mediated control that are expressed at the beginning of consumption. Most nitrogen compounds consumed late are transported by permeases under nitrogen catabolite repression (NCR), and others (Val, Trp, and Tyr) are transported by SPS-regulated low-affinity permeases. Therefore, the kinetic characteristics of transporters, as well as SPS and NCR, are likely key factors controlling the temporal sequence of consumption of nitrogen compounds and constitute a system highly conserved in S. cerevisiae species. This work sheds new light on the mechanistic basis of the sequential use of different nitrogen compounds in complex environments.     

Two-dimensional protein map of an “ale”-brewing yeast strain: proteome dynamics during fermentation

The first protein map of an ale-fermenting yeast is presented in this paper: 205 spots corresponding to 133 different proteins were identified. Comparison of the proteome of this ale strain with a lager brewing yeast and the Saccharomyces cerevisiae strain S288c confirmed that this ale strain is much closer to S288c than the lager strain at the proteome level. The dynamics of the ale-brewing yeast proteome during production-scale fermentation was analysed at the beginning and end of the first and the third usage of the yeast (called generation in the brewing industry). During the first generation, most changes were related to the switch from aerobic propagation to anaerobic fermentation. Fewer changes were observed during the third generation but certain stress-response proteins such as Hsp26p, Ssa4p and Pnc1p exhibited constitutive expression in subsequent generations. The ale brewing yeast strain appears to be quite well adapted to fermentation conditions and stresses.     

Diacetyl control during brewery fermentation via adaptive laboratory engineering of the lager yeast <Emphasis Type="Italic">Saccharomyces pastorianus</Emphasis>

Diacetyl contributes to the flavor profile of many fermented products. Its typical buttery flavor is considered as an off flavor in lager-style beers, and its removal has a major impact on time and energy expenditure in breweries. Here, we investigated the possibility of lowering beer diacetyl levels through evolutionary engineering of lager yeast for altered synthesis of α-acetolactate, the precursor of diacetyl. Cells were exposed repeatedly to a sub-lethal level of chlorsulfuron, which inhibits the acetohydroxy acid synthase responsible for α-acetolactate production. Initial screening of 7 adapted isolates showed a lower level of diacetyl during wort fermentation and no apparent negative influence on fermentation rate or alcohol yield. Pilot-scale fermentation was carried out with one isolate and results confirmed the positive effect of chlorsulfuron adaptation. Diacetyl levels were over 60% lower at the end of primary fermentation relative to the non-adapted lager yeast and no significant change in fermentation performance or volatile flavor profile was observed due to the adaptation. Whole-genome sequencing revealed a non-synonymous SNP in the ILV2 gene of the adapted isolate. This mutation is known to confer general tolerance to sulfonylurea compounds, and is the most likely cause of the improved tolerance. Adaptive laboratory evolution appears to be a natural, simple and cost-effective strategy for diacetyl control in brewing.     

Improvement of the ethanol productivity in a high gravity brewing at pilot plant scale

A 2³ full factorial design was used to study the influence of different experimental variables, namely wort gravity, fermentation temperature and nutrient supplementation, on ethanol productivity from high gravity wort fermentation by Saccharomyces cerevisiae (lager strain), under pilot plant conditions. The highest ethanol productivity (0.69 g l^–1 h^–1) was obtained at 20°P [°P is the weight of extract (sugar) equivalent to the weight of sucrose in a 100 g solution at 20°C], 15°C, with the addition of 0.8% (w/v) yeast extract, 24 mg l^–1 ergosterol and 0.24% (v/v) Tween 80.     

Characterization and Functional Analysis of the MAL and MPH Loci for Maltose Utilization in Some Ale and Lager Yeast Strains

Maltose and maltotriose are the major sugars in brewer's wort. Brewer's yeasts contain multiple genes for maltose transporters. It is not known which of these express functional transporters. We correlated maltose transport kinetics with the genotypes of some ale and lager yeasts. Maltose transport by two ale strains was strongly inhibited by other α-glucosides, suggesting the use of broad substrate specificity transporters, such as Agt1p. Maltose transport by three lager strains was weakly inhibited by other α-glucosides, suggesting the use of narrow substrate specificity transporters. Hybridization studies showed that all five strains contained complete MAL1, MAL2, MAL3, and MAL4 loci, except for one ale strain, which lacked a MAL2 locus. All five strains also contained both AGT1 (coding a broad specificity α-glucoside transporter) and MAL11 alleles. MPH genes (maltose permease homologues) were present in the lager but not in the ale strains. During growth on maltose, the lager strains expressed AGT1 at low levels and MALx1 genes at high levels, whereas the ale strains expressed AGT1 at high levels and MALx1 genes at low levels. MPHx expression was negligible in all strains. The AGT1 sequences from the ale strains encoded full-length (616 amino acid) polypeptides, but those from both sequenced lager strains encoded truncated (394 amino acid) polypeptides that are unlikely to be functional transporters. Thus, despite the apparently similar genotypes of these ale and lager strains revealed by hybridization, maltose is predominantly carried by AGT1-encoded transporters in the ale strains and by MALx1-encoded transporters in the lager strains.     

Engineering of yeast Put4 permease and its application to lager yeast for efficient proline assimilation

The Saccharomyces cerevisiae Put4 permease is significant for the transport of proline, alanine, and glycine. Put4p downregulation is counteracted by npi1 mutation that affects the cellular ubiquitination function. Here we describe mutant Put4 permeases, in which up to nine lysine residues in the cytoplasmic N-terminal domain have been replaced by arginine. The steady-state protein level of the mutant permease Put4-20p (Lys9, Lys34, Lys35, Lys60, Lys68, Lys71, Lys93, Lys105, Lys107 --> Arg) was largely higher compared to that of the wild-type Put4p, indicating that the N-terminal lysines can undergo ubiquitination and the subsequent degradation steps. Proline is the only amino acid that yeast assimilates with difficulty under standard brewing conditions. A lager yeast strain provided with Put4-20p was able to assimilate proline efficiently during beer fermentations. These results suggest possible industrial applications of the mutant Put4 permeases in improved fermentation systems for beer and other alcoholic beverages based on proline-rich fermentable sources.     

Adhesion of yeast cells to different porous supports, stability of cell-carrier systems and formation of volatile by-products

The aim of our research was to study how the conditions of immobilization influence cell attachment to two different ceramic surfaces: hydroxylapatite and chamotte tablets. Three fermentative yeast strains, namely brewery TT, B4 (ale, lager) and distillery Bc15a strains belonging to Saccharomyces spp., and one strain of Debaryomyces occidentalis Y500/5 of weak fermentative nature, but with high amylolytic activity due to extracellular ??-amylase and glucoamylase, were used in this study. Different media, including cell starvation, were applied for immobilization of yeast strains as well as different phases of cell growth. Immobilization of selected yeasts on a hydroxylapatite carrier was rather weak. However, when incubation of starved yeast cells was conducted in the minimal medium supplemented by calcium carbonate, the scale of immobilization after 24?h was higher, especially for the D. occidentalis strain. Adhesion to hydroxylapatite carriers in wort broth was of reversible character and better results of adhesion were observed in the case of another ceramic carrier-chamotte. The number of immobilized cells was about 10⁶?C10⁷ per tablet and cell adhesion was stable during the whole fermentation process. The comparison of the volatile products that were formed during fermentation did not show any significant qualitative and quantitative differences between the free and the immobilized cells. This is the first time when a cheap, porous chamotte surface has been applied to yeast adhesion and fermentation processes.     

Effects of heat shock and ethanol stress on the viability of aSaccharomyces uvarum (carlsbergensis) brewing yeast strain during fermentation of high gravity wort

Summary The effects of heat shock and ethanol stress on the viability of a lager brewing yeast strain during fermentation of high gravity wort were studied. These stress effects resulted in reduced cell viability and inhibition of cell growth during fermentation. Cells were observed to be less tolerant to heat shock during the fermentation of 25°P (degree Plato) wort than cells fermenting 16°P wort. Degree Plato (^oP) is the weight of extract (sugar) equivalent to the weight of sucrose in a 100 g solution at 20°C. Relieving the stress effects of ethanol by washing the cells free of culture medium, improved their tolerance to heat shock. Cellular changes in yeast protein composition were observed after 24 h of fermentation at which time more than 2% (v/v) ethanol was present in the growth medium. The synthesis of these proteins was either induced by ethanol or was the result of the transition of cells from exponential phase to stationary phase of growth. No differences were observed in the protein composition of cells fermenting 16°P wort compared to those fermenting 25°P wort. Thus, the differences in the tolerance of these cells to heat shock may be due to the higher ethanol concentration produced in 25°P wort which enhanced their sensitivity to heat shock.     

Evolution of the Lactic Acid Bacterial Community during Malt Whisky Fermentation: a Polyphasic Study

The development of the lactic acid bacterial community in a commercial malt whisky fermentation occurred in three broad phases. Initially, bacteria were inhibited by strong yeast growth. Fluorescence microscopy and environmental scanning electron microscopy revealed, in this early stage, both cocci and rods that were at least partly derived from the wort and yeast but also stemmed from the distillery plant. Denaturing gradient gel electrophoresis (DGGE) of partial 16S rRNA genes and sequence analysis revealed cocci related to Streptococcus thermophilus or Saccharococcus thermophilus, Lactobacillus brevis, and Lactobacillus fermentum. The middle phase began 35 to 40 h after yeast inoculation and was characterized by exponential growth of lactobacilli and residual yeast metabolism. Lactobacillus casei or Lactobacillus paracasei, L. fermentum, and Lactobacillus ferintoshensis were detected in samples of fermenting wort examined by DGGE during this stage. Bacterial growth was accompanied by the accumulation of acetic and lactic acids and the metabolism of residual maltooligosaccharides. By 70 h, two new PCR bands were detected on DGGE gels, and the associated bacteria were largely responsible for the final phase of the fermentation. The bacteria were phylogenetically related to Lactobacillus acidophilus and Lactobacillus delbrueckii, and strains similar to the former had previously been recovered from malt whisky fermentations in Japan. These were probably obligately homofermentative bacteria, required malt wort for growth, and could not be cultured on normal laboratory media, such as MRS. Their metabolism during the last 20 to 30 h of fermentation was associated with yeast death and autolysis and further accumulation of lactate but no additional acetate.