Electronic methods for the analysis of the human post-canine dentition

The human post-canine dentitions are described and analyzed, in terms of the relative plane surface area of the occlusal surface, by electronic methods. Dental casts are duplicated and the marked duplicates are then photographed in a 1:1 relationship. The photographic negatives are digitized, i.e., the points marked on the casts are converted to X and Y coordinates which are recorded on punched cards. Computer facilities are used to convert the X and Y coordinates into mensurational data and to calculate the relative plane surface areas of the crown components and the total relative plane surface of the crown. The accuracy of this method was verified by the statistical analyses.     

中国人牙齿形态测量分析——华北近代人群臼齿齿冠及齿尖面积

本文采用数字摄影和图像分析技术对华北新石器时代人类上、下颌臼齿齿冠及齿尖基底面积进行了精确测量。在此基础上, 计算了相对齿尖基底面积。结果显示: 近代华北人上颌各臼齿齿尖大小均呈原尖>前尖>后尖>次尖的顺序, 下颌三个臼齿齿尖大小面积顺序有所不同; 上颌的后尖和次尖呈现异速生长的趋势。各臼齿齿尖相对面积的总体变异呈下颌臼齿大于上颌臼齿、M1到M3依次增加、靠近远中侧的齿尖大于近中侧的齿尖的趋势。本文首次对现代中国人臼齿相对齿尖面积进行了调查统计, 为古人类学及体质人类学研究积累了基础性数据。本研究显示利用数字摄影和图像分析技术对包括臼齿齿冠和齿尖面积在内的非线性特征进行精确的定量分析较传统的测量方法具有明显的优越性, 在古人类学和体质人类学研究中有广泛的应用前景。     

Cusp size, sexual dimorphism, and heritability of cusp size in twins.

Overall measures of mandibular molars reflect the combined size contributions of the component cusps and ridges. Until now, the size hierarchy of primary and permanent mandibular molar cusps remained unclear. This paper utilizes the relative plane surface areas (basal area dimensions) of the individual molar cusps, as assays of cusp size to demonstrate cusp size variations within populations, antimere cuspal variations, sexual dimorphism, and, the heritability of cusp size. Duplicate dental casts from 199 pairs of like-sexed twins provide the raw dats. Defined anatomic landmarks on the occlusal surfaces were reduced to X-Y rectangular coordinates prior to the computation of the basal areas dimensions. The results establish a cusp size hierarchy specific for molar type, i.e., five-cusped molars with a distal fovea and distal marginal ridge (5fd), five-cusped molars without a distal fovea and without a distal marginal ridge (5o), and four-cusped molars (4c). Sexual dimorphism in cusp size is apparent in 5fd molar cusped but not in 5o molar cusps. However, males have a significantly higher frequency of 5fd molars. Females have a higher frequency of smaller 5o and 4c molars which have fewer crown components. Moreover, female 5o molars have cusps as large as or larger than 5o male molor cusps. Right-side-left-side differences exist between antimere cusps based on relatively low correlations. The mirroring of molor types occurs infrequently. When observed, most intrapair differences for cusp size, using F-ratios, indicate a low component of hereditary variability.     

全新世中国北方人群第一臼齿齿冠面积和齿尖相对面积的测量分析

通过对532枚中国北方地区新石器时代到青铜时代和铁器时代人类上、下颌骨第一臼齿(M1和M1)齿冠面积和齿尖面积的测量和分析, 得到以下关于中国北方近代人群牙齿尺寸的准确数据和变异情况的结果: 两性M1和M1齿冠面积存在显著性差异, 男性齿冠面积大于女性齿冠面积, 齿尖相对面积不存在性别差异; 从新石器时代到青铜时代男性M1和M1分别缩小了1.16%和4.96%, 女性分别缩小了5.68%和6.11%,青铜时代到铁器时代齿冠面积无明显变化; M1颊侧尖相对基底面积大于舌侧尖, 形成齿尖大小差异的原因很可能是在人类演化过程中, 齿冠面积整体缩小的趋势下, 为使咬合面最大化使用, 各齿尖朝着更利于扩大咬合面基底面积的方式进化的结果; 世界各地区近代人群M1和M1各齿尖大小顺序基本一致, 其中M1为原尖>前尖>后尖>次尖, M1下原尖最大, 下次小尖最小, 其他三个齿尖面积非常接近, 不存在明显大小变化。     

Technical note: Occlusal fingerprint analysis: Quantification of tooth wear pattern

Information about food ingestion and mastication behavior during the lifespan of an individual is encoded in the dental occlusal wear pattern. To decode this information, we describe a new method called occlusal fingerprint analysis (OFA). Structural parameters of wear facets on the occlusal surface of teeth are quantified from digitized casts for the interpretation of occlusal aspects. The OFA provides an individual three‐dimensional dental occlusal compass that indicates the major pathways of interaction between antagonists, revealing information about development, spatial position, and enlargement of wear facets. Humans develop a very similar overall pattern of crown contacts, although specific characteristics of wear facets reflect an individual's occlusal relationships and masticatory behavior. We hypothesize that the wear pattern is a unique character and therefore valuable for individual identification. Furthermore we suggest that OFA, when further developed, may be useful for identification of behavioral, biological, and chemical factors affecting crown morphology. Am J Phys Anthropol, 2009. © 2009 Wiley‐Liss, Inc.     

Changes in food processing and occlusal dental wear during the early agricultural period in northwest Mexico

Crown dimensions and occlusal surface wear rate and wear plane were evaluated using paired first and second mandibular molars from a sample of 84 Early Agricultural period (1600 B.C.-A.D. 200) skeletons from northwest Mexico. Although this period represents a major shift in subsistence strategies in the Sonoran Desert, from food-foraging to agriculture, archaeological and dental pathology studies have identified this period as one of relative dietary stability. It was therefore predicted that very little variation in occlusal wear would have occurred between the early phase (San Pedro: 1600-800 B.C.) and late phase (Cienega: 800 B.C.-A.D. 200). Comparison of crown diameters identified some phenotypic differences between sexes but not between archaeological phases. Molar occlusal surfaces were then divided into four quadrants, and wear scores recorded for each quadrant. Principle axis analysis was performed between total wear scores of paired, adjacent first and second mandibular molars to assess rate and occlusal wear plane over time. The analysis demonstrated that both wear rate and wear plane increased from the early to the late phase of the Early Agricultural period. These results indicate that although diet may have indeed remained stable during this period in the Sonoran Desert increases in the rate of wear and wear plane may reflect changes in food-processing techniques. It is suggested that more intensive processing of agricultural products during the Cienega phase simultaneously softened the diet to create more tooth-contact wear and introduced more grit to cause faster and more angled wear on the molar occlusal surfaces.     

Comparison of dental measurement systems for taxonomic assignment of first molars

Morphometrics of the molar crown is based traditionally on diameter measurements but is nowadays more often based on 2D image analysis of crown outlines. An alternative approach involves measurements at the level of the cervical line. We compare the information content of the two options in a three-dimensional (3D) digital sample of lower and upper first molars (M(1) and M(1) ) of modern human and Neanderthal teeth. The cervical outline for each tooth was created by digitizing the cervical line and then sectioning the tooth with a best fit plane. The crown outline was projected onto this same plane. The curves were analyzed by direct extraction of diameters, diagonals, and area and also by principal component analysis either of the residuals obtained by regressing out these measurements from the radii (shape information) or directly by the radii (size and shape information). For M(1) , the crown and cervical outline radii allow us to discriminate between Neanderthals and modern humans with 90% and 95% accuracy, respectively. Fairly good discrimination between the groups (80-82.5%) was also obtained using cervical measurements. With respect to M(1) , general overlap of the two groups was obtained by both crown and cervical measurements; however, the two taxa were differentiable by crown outline residuals (90-97%). Accordingly, while crown diameters or crown radii should be used for taxonomic analysis of unworn or slightly worn M(1) s, the crown outline, after regressing out size information, could be promising for taxonomic assignment of lower M1s.     

Postcanine tooth size in female primates

The results of many allometric studies of postcanine tooth size in mammals have not corresponded to expectations of tooth size based on energy requirements and dental function. The purpose of this study is to investigate the relationship between postcanine occlusal surface area, body size, and the metabolic demands of pregnancy and lactation in female primates. Tooth and body sizes from 38 primate species were taken from the literature to test two hypotheses: 1) females should have relatively larger teeth than males in order to masticate additional food for the energetic costs of reproduction; 2) taxa with the largest neonatal size (a measure of average metabolic costs of pregnancy and lactation) should have females with a greater degree of relative dental enlargement. The results show that relatively large female teeth are not found consistently in primate species. Females have less occlusal surface area than expected on the basis of the male tooth and body size regression in 21% of the species, and there is no correlation between relative female tooth size and relative newborn size across higher primate taxa. The degree of female dental enlargement is most closely related to degree of sexual dimorphism in body weight. The correlation between degree of body weight dimorphism and relatively larger postcanine teeth in females than in males is 0.87 in the 38 species. Species that are monomorphic in weight tend to be monomorphic in tooth size even though females apparently require more food than males.(ABSTRACT TRUNCATED AT 250 WORDS)     

Multivariate analysis of tooth crown morphology in Japanese-American F1 hybrids

Mesiodistal crown diameters of I1 through M1 and six non-metric crown traits in permanent dentition of Japanese-American F₁ hybrids were compared with those of the parental populations. The hybrids were born of Japanese females and American males, both Caucasians and American Blacks, after World War II and brought up at Elizabeth Saunders Home in Kanagawa Prefecture, Japan. The comparisons were undertaken by means of multivariate analysis methods such as principal component analysis, distance and similarity coefficients and multidimensional scaling. The F₁ hybrids generally occupy an intermediate position of the two parental populations, and this is particularly evident in size component of the crown measurements and in distance analysis of frequencies of the non-metric crown traits. The shape component of the crown measurements, however, not necessarily follows such a rule and suggests a more complicated gene control than in the case of the size component. Also, each measurement and frequency of non-metric trait of tooth crowns in F₁ hybrids is not uniformly at the middle position between their parental populations but this is true when they are analyzed as multivariables.     

Apparent 2-D diffusivity in a ruffled cell membrane

Most biological cell membranes have a microtopology that increases their surface area, including a highly ruffled surface in the case of leukocytes. Thus, molecular membrane diffusivities as measured by fluorescence recovery after photobleaching or other methods are decreased when projected onto a plane. We use a two-dimensional crested cycloid as a parameterized surface to simulate the random-walk diffusion of a molecule within a ruffled membrane. The apparent 2-D diffusivity was then calculated when the ruffled membrane is projected onto a plane. It is shown that the apparent diffusivity decreases as a function of the membrane area, to the -1.4 power.     

Permanent tooth mineralization in bonobos (Pan paniscus) and chimpanzees (P. troglodytes)

The timing of tooth mineralization in bonobos (Pan paniscus) is virtually uncharacterized. Analysis of these developmental features in bonobos and the possible differences with its sister species, the chimpanzee (P. troglodytes), is important to properly quantify the normal ranges of dental growth variation in closely related primate species. Understanding this variation among bonobo, chimpanzee and modern human dental development is necessary to better contextualize the life histories of extinct hominins. This study tests whether bonobos and chimpanzees are distinguished from each other by covariance among the relative timing and sequences of tooth crown initiation, mineralization, root extension, and completion. Using multivariate statistical analyses, we compared the relative timing of permanent tooth crypt formation, crown mineralization, and root extension between 34 P. paniscus and 80 P. troglodytes mandibles radiographed in lateral and occlusal views. Covariance among our 12 assigned dental scores failed to statistically distinguish between bonobos and chimpanzees. Rather than clustering by species, individuals clustered by age group (infant, younger or older juvenile, and adult). Dental scores covaried similarly between the incisors, as well as between both premolars. Conversely, covariance among dental scores distinguished the canine and each of the three molars not only from each other, but also from the rest of the anterior teeth. Our study showed no significant differences in the relative timing of permanent tooth crown and root formation between bonobos and chimpanzees. Am J Phys Anthropol, 2012. © 2012 Wiley Periodicals, Inc.     

Finite element analysis of anterior tooth root stresses developed during endodontic treatment

Vertical tooth root fractures are diagnostically challenging, frustrating, and an increasingly common cause of failure of tooth restoration. These vertical root fractures have been associated with many causes, including the endodontic process itself. To investigate these endodontic causes, various phases of crown replacement for an anterior tooth were modeled using nonlinear, plane strain finite element (FE) analysis. Stresses developed during obturation, post positioning, crown placement, and masticatory and occlusal loading of the restored tooth were estimated using this analysis method. The minimum (compressive) principal stress was greatest during obturation of cones 1 and 2, and during mastication of the restored tooth. Although these stresses were significant (-150 to -280 MPa), they did not exceed the compressive strength of dentin. The maximum (tensile) principal stresses, 160 to 300 MPa, were also observed during obturation of cones 1 and 2. These peak stresses exceed the dentin tensile strength.     

A morphometric analysis of maxillary molar crowns of Middle-Late Pleistocene hominins

This study explores the significance of shape differences in the maxillary first molar crowns of Neandertals and anatomically modern humans. It uses morphometric analysis to quantify these differences and to investigate how the orientation of major cusps, relative cusp base areas and occlusal polygon area influence crown shape. The aims of this study were to 1) quantify these data to test whether the tooth shapes of Neandertals and anatomically modern humans differ significantly and 2) to explore if either of the shapes is derived relative to earlier fossil hominins. Data were collected from digital occlusal photographs using image-processing software. Cusp angles, relative cusp base areas and occlusal polygon areas were measured on Neandertals (n=15), contemporary modern humans (n=62), Upper Paleolithic humans (n=6), early anatomically modern humans (n=3) and Homo erectus (n=3). Univariate and multivariate statistical tests were used to evaluate the differences between contemporary modern humans and Neandertals, while the much sparser data sets from the other fossil samples were included primarily for comparison. Statistically significant differences reflecting overall crown shape and internal placement of the crown apices were found. Neandertals are distinguished from contemporary humans by possessing maxillary first molars that 1) are markedly skewed; 2) possess a narrower distal segment of the occlusal polygon compared to the mesial segment; 3) possess a significantly smaller metacone and a significantly larger hypocone; and 4) possess a significantly smaller relative occlusal polygon area reflecting internally placed cusps. Differences in relative cusp base areas of the hypocone and metacone may contribute to the shape differences observed in Neandertals. However, early anatomically modern humans possessing a pattern of relative cusp base areas similar to Neandertals lack their unusual shape. That the morphology observed in non-Neandertal fossil hominins is more anatomically modern human-like than Neandertal-like, suggests that this distinctive morphology may be derived in Neandertals.     

Patterns of dental wear in the Lengua Indians of Paraguay

Wear patterns were examined on dental casts of 202 living Lengua Indians from the Chaco area of Paraguay. Consideration was given to the development of the molar helicoidal plane, age-related changes in occlusal attrition, coalescence of dentine exposures, interproximal attrition, and erupted crown height. This study lends support to Osborn's theory of the helicoidal plane development by showing that attrition enhances rather than modifies posteruption molar occlusal planes. The rate of interproximal attrition was found to slow down with the eruption and functional initiation of the third molars. Sinuous and cavo-convex interproximal contact areas that are generated with age, however, appeared to be less abrasion resistant than straight surfaces, hence leading to an increase in interproximal attrition rates with advanced age. Maximum crown height reduction occurred between the ages of 20 and 40 years in central incisors, canines, and first molars. Kruskal-Wallis tests and log linera models failed to demonstrate significant sexually dimorphic or antimeric differences in wear patterns of Lengua teeth.     

Evolution of anthropoid jaw loading and kinematic patterns

Major transformations in the skull and masticatory system characterized the evolution of crown anthropoids. To offer further insight into the phylogenetic and arguably adaptive significance of specific primate mandibular loading and kinematic patterns, allometric analyses of metric parameters linked to masticatory function are performed within and between 47 strepsirhine and 45 recent anthropoid species. When possible, basal anthropoids are considered. These results are subsequently integrated with prior experimental and morphological work on primate skull form. As compared to strepsirhines, crown anthropoids have a vertically longer ascending ramus linked to a glenoid and condyle positioned relatively higher above the occlusal plane. Interestingly, anthropoids and strepsirhines do not exhibit different mean ratios of condylar to glenoid height, which suggests that both clades are similar in their ability to evenly distribute occlusal contacts and perhaps forces along the postcanine teeth. Thus, given the considerable suborder differences in the scaling of both glenoid and condylar height, we argue that much of this variation in jaw-joint height is linked to suborder differences in relative facial height due in turn to increased encephalization, basicranial flexion, and facial kyphosis in anthropoids. Due to a more elongate ascending ramus, anthropoids evince more vertically oriented masseters than like-sized strepsirhines. Having a relatively longer ramus and a more medially displaced lateral pterygoid plate, crown anthropoids exhibit medial pterygoids oriented similar to those of strepsirhines, but with a variably longer lever arm. As anthropoid masseters are less advantageously placed to effect transverse movements/forces, we argue that balancing-side deep-masseter activity underlying a wishboning loading regime serves to increase, or at least maintain, transverse levels of jaw movement and occlusal force at the end of the masticatory power stroke. Crown anthropoids are also more isognathic and isodontic than strepsirhines. A consideration of early anthropoids suggests that the crown anthropoid masticatory pattern, i.e., more vertical masseters due to a high condyle as well as greater isognathy and isodonty, occurred stepwise during stem anthropoid evolution. This appears to correspond to a more transverse, and perhaps progressively larger, power stroke across oligopithecids, parapithecids, and propliopithecids.     

Simple equations to estimate light interception by isolated trees from canopy structure features: assessment with three-dimensional digitized apple trees

* Simple models of light interception are useful to identify the key structural parameters involved in light capture. We developed such models for isolated trees and tested them with virtual experiments. Light interception was decomposed into the projection of the crown envelope and the crown porosity. The latter was related to tree structure parameters. * Virtual experiments were conducted with three-dimensional (3-D) digitized apple trees grown in Lebanon and Switzerland, with different cultivars and training. The digitized trees allowed actual values of canopy structure (total leaf area, crown volume, foliage inclination angle, variance of leaf area density) and light interception properties (projected leaf area, silhouette to total area ratio, porosity, dispersion parameters) to be computed, and relationships between structure and interception variables to be derived. * The projected envelope area was related to crown volume with a power function of exponent 2/3. Crown porosity was a negative exponential function of mean optical density, that is, the ratio between total leaf area and the projected envelope area. The leaf dispersion parameter was a negative linear function of the relative variance of leaf area density in the crown volume. * The resulting models were expressed as two single equations. After calibration, model outputs were very close to values computed from the 3-D digitized databases.     

樟子松人工林树冠表面积及体积预估模型的研究

基于樟子松(Pinus sylvestris var. mongolica)人工林6块固定标准地30株枝解析数据,在分析树冠表面积和树冠体积与林分变量和林木变量的基础上,利用幂函数建立了树冠表面积（CSA）和树冠体积(CV)的预估模型,同时还对林木材积生长量与CSA和CV进行了相关分析。研究结果表明：樟子松人工林树冠表面积和树冠体积随着林木胸径、树高和冠长的增大而增大,林木材积生长量与树冠表面积和树冠体积均明显呈线性关系。不同林分条件的樟子松人工林CSA和CV随林分年龄和胸径的增大而增大,CSA随林分密度的增大而减小,而CV与林分密度相关不紧密。林分树冠表面积和树冠体积预估模型的检验结果表明,两个模型的平均相对误差都在±8%之内,预估精度均大于91%,说明所建模型可以很好地预估樟子松人工林不同林分条件下的林木树冠表面积和树冠体积。     

Understanding changes in black (Picea mariana) and white spruce (Picea glauca) foliage biomass and leaf area characteristics

Key message

Growth conditions related to inter-tree competition greatly influence black and white spruce foliage biomass and projected leaf area characteristics.

Abstract

Foliage characteristics such as biomass and area are important among other reasons because they can be related to tree growth. Despite their economic and ecologic importance, equations to characterize foliage biomass and projected area of black (Picea mariana (Miller) BSP) and white (Picea glauca (Moench) Voss) spruces are sparse. Total foliage biomass and projected leaf area, foliage biomass and leaf area density, and relative vertical distribution of black and white spruces foliage biomass and leaf area were modelled with linear and nonlinear mixed effect models. A total of 65 white spruces and 57 black spruces were destructively sampled at four different locations in Alberta, Québec, and Ontario, Canada. Our results show that for each species, total tree foliage biomass and projected leaf area is proportional to stem diameter, total height, and crown length. The addition of crown length in the equations improved the precision of the predictions of total foliage biomass for both species and diminishes greatly the site level random effect. An increase in DBH for black spruce and in the DBH to total height ratio for white spruce skewed the relative vertical foliage biomass distribution toward the base of the living crown. According to our results, growth conditions or tree development stage influence both foliage biomass and leaf area characteristics of black and white spruces. Our results emphasize the importance of inter-tree competition on foliage biomass characteristics.