l-Arginine induces protein aggregation and transformation of supramolecular structures of the aggregates

Protein misfolding, self-assembly, and aggregation are an essential problem in cell biology, biotechnology, and biomedicine. The protein aggregates are very different morphologically varying from soluble amorphous aggregates to highly ordered amyloid-like fibrils. The objective of this study was to elucidate the role of the amino acid l-arginine (Arg), a widely used suppressor of protein aggregation, in the regulation of transformations of soluble aggregation-prone proteins into supramolecular structures of higher order. However, a striking potential of Arg to govern the initial events in the process of protein aggregation has been revealed under environment conditions where the protein aggregation in its absence was not observed. Using dynamic light scattering we have demonstrated that Arg (10–100 mM) dramatically accelerated the dithiothreitol-induced aggregation of acidic model proteins. The inhibitory effect on the protein aggregation was revealed at higher concentrations of Arg. Using atomic force microscopy it was shown that aggregation of α-lactalbumin from bovine milk induced upon addition of Arg reached a state of formation of supramolecular structures of non-fibrillar species profoundly differing from those of the individual protein in type, size, and shape. The interaction of another positively charged amino acid l-lysine with α-lactalbumin also resulted in profound acceleration of the aggregation process and transformation of supramolecular structures of the aggregates.     

Formation of supramolecular structures of a native-like protein in the presence of amphiphilic peptides: Variations in aggregate morphology

A striking potential of the amphiphilic dipeptides, Arg-Phe or Asp-Phe, to induce aggregation of a model protein, alcohol dehydrogenase in its native-like state, has been demonstrated under physiologically relevant conditions, using dynamic light scattering, fluorescence spectroscopy, circular dichroism, transmission electron- and atomic force microscopy. The peptide action resulted in accumulation of a variety of morphologically distinct supramolecular structures profoundly differing from those generated by the heat-induced aggregation at the early stages of the process, when amyloid fibril assemblies were not detectable. The biogenic amphiphilic agents are suggested to act as regulators of structural transformations of native-like proteins.     

Peptide Nanovesicles Formed by the Self-Assembly of Branched Amphiphilic Peptides

Peptide-based packaging systems show great potential as safer drug delivery systems. They overcome problems associated with lipid-based or viral delivery systems, vis-a-vis stability, specificity, inflammation, antigenicity, and tune-ability. Here, we describe a set of 15 & 23-residue branched, amphiphilic peptides that mimic phosphoglycerides in molecular architecture. These peptides undergo supramolecular self-assembly and form solvent-filled, bilayer delimited spheres with 50–200 nm diameters as confirmed by TEM, STEM and DLS. Whereas weak hydrophobic forces drive and sustain lipid bilayer assemblies, these all-peptide structures are stabilized potentially by both hydrophobic interactions and hydrogen bonds and remain intact at low micromolar concentrations and higher temperatures. A linear peptide lacking the branch point showed no self-assembly properties. We have observed that these peptide vesicles can trap fluorescent dye molecules within their interior and are taken up by N/N 1003A rabbit lens epithelial cells grown in culture. These assemblies are thus potential drug delivery systems that can overcome some of the key limitations of the current packaging systems.     

Mechanisms of the self-assembly of EAK16-family peptides into fibrillar and globular structures: molecular dynamics simulations from nano- to micro-seconds

The self-assembly of EAK16-family peptides in a bulk solution was studied using a combination of all-atom and coarse-grained molecular dynamics simulations. In addition, specified concentrations of EAK16 peptides were induced to form fibrillary or globular assemblies in vitro. The results show that the combination of all-atom molecular dynamics simulations on the single- and double-chain levels and coarse-grained simulations on the many-chain level predicts the experimental observations reasonably well. At neutral pH conditions, EAK16-I and EAK16-II assemble into fibrillary structures, whereas EAK16-IV aggregates into globular assemblies. Mechanisms of the formation of fibrillar and globular assemblies are described using the simulation results.     

Self Assembly of Short Aromatic Peptides into Amyloid Fibrils and Related Nanostructures

The formation of amyloid fibrils is the hallmark of more than twenty human disorders of unrelated etiology. In all these cases, ordered fibrillar protein assemblies with a diameter of 7–10 nm are being observed. In spite of the great clinical important of amyloidassociated diseases, the molecular recognition and self-assembly processes that lead to the formation of the fibrils are not fully understood. One direction to decipher the mechanism of amyloid formation is the use of short peptides fragments as model systems. Short peptide fragments, as short as pentapeptides, were shown to form typical amyloid assemblies in vitro that have ultrastructural, biophysical, and cytotoxic properties, as those of assemblies that are being formed by full length polypeptides. When we analyzed such short fragments, we identified the central role of aromatic moieties in the ability to aggregate into ordered nano-fibrillar structures. This notion allowed us to discover additional very short amyloidogenic peptides as well as other aromatic peptide motifs, which can form various assemblies at the nano-scale (including nanotubes, nanospheres, and macroscopic hydrogels with nano-scale order). Other practical utilization of this concept, together with novel β breakage methods, is their use for the development of novel classes of amyloid formation inhibitors.Key Words: Alzheimer''s disease, amyloid disease, molecular recognition, nanostructures, protein aggregation, protein misfolding, self-assembly, type II diabetes     

Protein aggregates as depots for the release of biologically active compounds

Protein misfolding and aggregation is one of the most serious problems in cell biology, molecular medicine, and biotechnology. Misfolded proteins interact with each other or with other proteins in non-productive or damaging ways. However, a new paradigm arises that protein aggregation may be exploited by nature to perform specific functions in different biological contexts. From this consideration, acceleration of stress-induced protein aggregation triggered by any factor resulting in the formation of soluble aggregates may have paradoxical positive consequences. Here, we suggest that amorphous aggregates can act as a source for the release of biologically active proteins after removal of stress conditions. To address this concept, we investigated the kinetics of thermal aggregation in vitro of yeast alcohol dehydrogenase (ADH) as a model substrate in the presence of two amphiphilic peptides: Arg-Phe or Ala-Phe-Lys. Using dynamic light scattering (DLS) and turbidimetry, we have demonstrated that under mild stress conditions the concentration-dependent acceleration of ADH aggregation by these peptides results in formation of large but soluble complexes of proteins prone to refolding.     

Investigating the effects of N-terminal acetylation on KFE8 self-assembly with 2D IR spectroscopy

Peptide self-assembly is an exciting and robust approach to create novel nanoscale materials for biomedical applications. However, the complex interplay between intra- and intermolecular interactions in peptide aggregation means that minor changes in peptide sequence can yield dramatic changes in supramolecular structure. Here, we use two-dimensional infrared spectroscopy to study a model amphiphilic peptide, KFE8, and its N-terminal acetylated counterpart, AcKFE8. Two-dimensional infrared spectra of isotope-labeled peptides reveal that AcKFE8 aggregates comprise two distinct β-sheet structures although KFE8 aggregates comprise only one of these structures. Using an excitonic Hamiltonian to simulate the vibrational spectra of model β-sheets, we determine that the spectra are consistent with antiparallel β-sheets with different strand alignments, specifically a two-residue shift in the register of the β-strands. These findings bring forth new insights into how N-terminal acetylation may subtly impact secondary structure, leading to larger effects on overall aggregate morphology. In addition, these results highlight the importance of understanding the residue-level structural differences that result from changes in peptide sequence to facilitate the rational design of peptide materials.     

Rapid self-assembly of alpha-synuclein observed by in situ atomic force microscopy

Self-assembly of alpha-synuclein resulting in protein aggregates of diverse morphology has been implicated in the pathogenesis of Parkinson's disease and other neurodegenerative disorders known as synucleinopathies. Apart from its biomedical relevance, this aggregation process is representative of the interconversion of an unfolded protein into nanostructures with typical amyloid features. We have used in situ tapping mode atomic force microscopy to continuously monitor the self-assembly of wild-type alpha-synuclein, its disease-related mutants A30P and A53T, and the C-terminally truncated variant alpha-synuclein(1-108). Different aggregation modes were observed depending on experimental conditions, i.e. pH, protein concentration, polyamine concentration, temperature and the supporting substrate. At pH 7.5, in the absence of the biogenic polyamines spermidine or spermine, elongated sheets 1.1(+/-0.2)nm in height and presumably representing individual beta-sheet structures, were formed on mica substrates within a few minutes. Their orientation was directed by the crystalline substructure of the substrate. In contrast, sheet formation was not observed with hydrophobic highly oriented pyrolytic graphite substrates, suggesting that negatively charged surfaces promote alpha-synuclein self-assembly. In the presence of spermidine or spermine 5.9(+/-1.0)nm high spheroidal structures were preferentially formed, sharing characteristics with similar structures previously reported for several amyloidogenic proteins and linked to neurotoxicity. alpha-Synuclein spheroid formation depended critically on polyamine binding to the C terminus, revealing a promoting effect of the C terminus on alpha-synuclein assembly in the bound state. In rare cases, fibril growth from spheroids or preformed aggregates was observed. At pH 5.0, fibrils were formed initially and incorporated into amorphous aggregates in the course of the aggregation process, providing evidence for the potential of amyloid fibril surfaces to act as nucleation sites in amorphous aggregation. This study provides a direct insight into different modes of alpha-synuclein self-assembly and identifies key factors modulating the aggregation process.     

Self-assembly of the ionic peptide EAK16: the effect of charge distributions on self-assembly

Amphiphilic peptides suspended in aqueous solution display a rich set of aggregation behavior. Molecular-level studies of relatively simple amphiphilic molecules under controlled conditions are an essential step toward a better understanding of self-assembly phenomena of naturally occurring peptides/proteins. Here, we study the influence of molecular architecture and interactions on the self-assembly of model peptides (EAK16s), using both experimental and theoretical approaches. Three different types of EAK16 were studied: EAK16-I, -II, and -IV, which have the same amino acid composition but different amino acid sequences. Atomic force microscopy confirms that EAK16-I and -II form fibrillar assemblies, whereas EAK16-IV forms globular structures. The Fourier transform infrared spectrum of EAK16-IV indicates the possible formation of a beta-turn structure, which is not found in EAK16-I and -II. Our theoretical and numerical studies suggest the underlying mechanism behind these observations. We show that the hairpin structure is energetically stable for EAK16-IV, whereas the chain entropy of EAK16-I and -II favors relatively stretched conformations. Our combined experimental and theoretical approaches provide a clear picture of the interplay between single-chain properties, as determined by peptide sequences (or charge distributions), and the emerging structure at the nano (or more coarse-grained) level.     

Surfactant effects on amyloid aggregation kinetics

There is strong experimental evidence of the influence of surfactants (e.g., fatty acids) on the kinetics of amyloid fibril formation. However, the structures of mixed assemblies and interactions between surfactants and fibril-forming peptides are still not clear. Here, coarse-grained simulations are employed to study the aggregation kinetics of amyloidogenic peptides in the presence of amphiphilic lipids. The simulations show that the lower the fibril formation propensity of the peptides, the higher the influence of the surfactants on the peptide self-assembly kinetics. In particular, the lag phase of weakly aggregating peptides increases because of the formation of mixed oligomers, which are promoted by hydrophobic interactions and favorable entropy of mixing. A transient peak in the number of surfactants attached to the growing fibril is observed before reaching the mature fibril in some of the simulations. This peak originates from transient fibrillar defects consisting of exposed hydrophobic patches on the fibril surface, which provide a possible explanation for the temporary maximum of fluorescence observed sometimes in kinetic traces of the binding of small-molecule dyes to amyloid fibrils.     

Mapping the conformational dynamics and pathways of spontaneous steric zipper Peptide oligomerization

The process of protein misfolding and self-assembly into various, polymorphic aggregates is associated with a number of important neurodegenerative diseases. Only recently, crystal structures of several short peptides have provided detailed structural insights into -sheet rich aggregates, known as amyloid fibrils. Knowledge about early events of the formation and interconversion of small oligomeric states, an inevitable step in the cascade of peptide self-assembly, however, remains still limited. We employ molecular dynamics simulations in explicit solvent to study the spontaneous aggregation process of steric zipper peptide segments from the tau protein and insulin in atomistic detail. Starting from separated chains with random conformations, we find a rapid formation of structurally heterogeneous, -sheet rich oligomers, emerging from multiple bimolecular association steps and diverse assembly pathways. Furthermore, our study provides evidence that aggregate intermediates as small as dimers can be kinetically trapped and thus affect the structural evolution of larger oligomers. Alternative aggregate structures are found for both peptide sequences in the different independent simulations, some of which feature characteristics of the known steric zipper conformation (e.g., -sheet bilayers with a dry interface). The final aggregates interconvert with topologically distinct oligomeric states exclusively via internal rearrangements. The peptide oligomerization was analyzed through the perspective of a minimal oligomer, i.e., the dimer. Thereby all observed multimeric aggregates can be consistently mapped onto a space of reduced dimensionality. This novel method of conformational mapping reveals heterogeneous association and reorganization dynamics that are governed by the characteristics of peptide sequence and oligomer size.     

Self Assembly of Short Aromatic Peptides into Amyloid Fibrils and Related Nanostructures

The formation of amyloid fibrils is the hallmark of more than twenty human disorders of unrelated etiology. In all these cases, ordered fibrillar protein assemblies with a diameter of 7-10 nm are being observed. In spite of the great clinical important of amyloid-associated diseases, the molecular recognition and self-assembly processes that lead to the formation of the fibrils are not fully understood. One direction to decipher the mechanism of amyloid formation is the use of short peptides fragments as model systems. Short peptide fragments, as short as pentapeptides, were shown to form typical amyloid assemblies in vitro that have ultrastructural, biophysical, and cytotoxic properties, as those of assemblies that are being formed by full length polypeptides. When we analyzed such short fragments, we identified the central role of aromatic moieties in the ability to aggregate into ordered nano-fibrillar structures. This notion allowed us to discover additional very short amyloidogenic peptides as well as other aromatic peptide motifs, which can form various assemblies at the nano-scale (including nanotubes, nanospheres, and macroscopic hydrogels with nano-scale order). Other practical utilization of this concept, together with novel β-breakage methods, is their use for the development of novel classes of amyloid formation inhibitors.     

Creating Prebiotic Sanctuary: Self-Assembling Supramolecular Peptide Structures Bind and Stabilize RNA

Any attempt to uncover the origins of life must tackle the known ‘blind watchmaker problem’. That is to demonstrate the likelihood of the emergence of a prebiotic system simple enough to be formed spontaneously and yet complex enough to allow natural selection that will lead to Darwinistic evolution. Studies of short aromatic peptides revealed their ability to self-assemble into ordered and stable structures. The unique physical and chemical characteristics of these peptide assemblies point out to their possible role in the origins of life. We have explored mechanisms by which self-assembling short peptides and RNA fragments could interact together and go through a molecular co-evolution, using diphenylalanine supramolecular assemblies as a model system. The spontaneous formation of these self-assembling peptides under prebiotic conditions, through the salt-induced peptide formation (SIPF) pathway was demonstrated. These peptide assemblies possess the ability to bind and stabilize ribonucleotides in a sequence-depended manner, thus increase their relative fitness. The formation of these peptide assemblies is dependent on the homochirality of the peptide monomers: while homochiral peptides (L-Phe-L-Phe and D-Phe-D-Phe) self-assemble rapidly in aqueous environment, heterochiral diastereoisomers (L-Phe-D-Phe and D-Phe-L-Phe) do not tend to self-assemble. This characteristic consists with the homochirality of all living matter. Finally, based on these findings, we propose a model for the role of short self-assembling peptides in the prebiotic molecular evolution and the origin of life.     

Nanotubules formed by highly hydrophobic amphiphilic alpha-helical peptides and natural phospholipids

We previously reported that the 18-mer amphiphilic alpha-helical peptide, Hel 13-5, consisting of 13 hydrophobic residues and five hydrophilic amino acid residues, can induce neutral liposomes (egg yolk phosphatidylcholine) to adopt long nanotubular structures and that the interaction of specific peptides with specific phospholipid mixtures induces the formation of membrane structures resembling cellular organelles such as the Golgi apparatus. In the present study we focused our attention on the effects of peptide sequence and chain length on the nanotubule formation occurring in mixture systems of Hel 13-5 and various neutral and acidic lipid species by means of turbidity measurements, dynamic light scattering measurements, and electron microscopy. We designed and synthesized two sets of Hel 13-5 related peptides: 1) Five peptides to examine the role of hydrophobic or hydrophilic residues in amphiphilic alpha-helical structures, and 2) Six peptides to examine the role of peptide length, having even number residues from 12 to 24. Conformational, solution, and morphological studies showed that the amphiphilic alpha-helical structure and the peptide chain length (especially 18 amino acid residues) are critical determinants of very long tubular structures. A mixture of alpha-helix and beta-structures determines the tubular shapes and assemblies. However, we found that the charged Lys residues comprising the hydrophilic regions of amphiphilic structures can be replaced by Arg or Glu residues without a loss of tubular structures. This suggests that the mechanism of microtubule formation does not involve the charge interaction. The immersion of the hydrophobic part of the amphiphilic peptides into liposomes initially forms elliptic-like structures due to the fusion of small liposomes, which is followed by a transformation into tubular structures of various sizes and shapes.     

Structural transitions and oligomerization along polyalanine fibril formation pathways from computer simulations

The results of a computer simulation study of the aggregation kinetics of a large system of model peptides with particular focus on the formation of intermediates are presented. Discontinuous molecular dynamic simulations were used in combination with our intermediate-resolution protein model, PRIME, to simulate the aggregation of a system of 192 polyalanine (KA(14) K) peptides at a concentration of 5 mM and a reduced temperature of T* = 0.13 starting from a random configuration and ending in the assembly of a fibrillar structure. The population of various structures, including free monomers, beta sheets, amorphous aggregates, hybrid aggregates, and fibrils, and the transitions between the structures were tracked over the course of 30 independent simulations and averaged together. The aggregation pathway for this system starts with the association of free monomers into small amorphous aggregates that then grow to moderate size by incorporating other free monomers or merging with other small amorphous aggregates. These then rearrange into either small beta sheets or hybrid aggregates formed by association between unstructured chains and beta sheets, both of which grow in size by adding free monomer chains or other small aggregates, one at a time. Fibrillar structures are formed initially either by the stacking of beta sheets, rearrangement of hybrid aggregates or association between beta sheets and hybrid aggregates. They grow by the addition of beta sheets, hybrid aggregates, and other small fibrillar structures. The rearrangement of amorphous aggregates into beta sheets is a critical and necessary step in the fibril formation pathway.     

What the use of disease-unrelated model proteins can tell us about the molecular basis of amyloid aggregation and toxicity

Recent advances in the studies on protein aggregation have led to a reappraisal of the concepts underlying this process. The data reported in the last few years showing that protein aggregation into assemblies of amyloid type can be considered a generic property of the polypeptide chains suggest that protein aggregation in cells can be a more common phenomenon than previously believed. Furthermore, the findings that aggregates of disease-unrelated proteins display the same cytotoxicity as those formed by proteins and peptides associated with disease suggest that toxicity is a consequence of the common structure of aggregates and that, at least in most cases, it proceeds by impairing common cellular parameters such as free Ca2+ and ROS levels. The new view that aggregation of polypeptide chains and aggregate toxicity are not linked to specific amino acid sequences rises dramatically the number of sequences one can investigate to assess the molecular features underlying protein aggregation and the molecular basis of aggregate toxicity. In addition, it rises intriguing considerations on protein and cell evolution as well as on amyloid disease pathogenesis.     

Sulfate Anion Delays the Self-Assembly of Human Insulin by Modifying the Aggregation Pathway

The understanding of the molecular mechanisms underlying protein self-assembly and of their dependence on solvent composition has implications in a large number of biological and biotechnological systems. In this work, we characterize the aggregation process of human insulin at acidic pH in the presence of sulfate ions using a combination of Thioflavin T fluorescence, dynamic light scattering, size exclusion chromatography, Fourier transform infrared spectroscopy, and transmission electron microscopy. It is found that the increase of sulfate concentration inhibits the conversion of insulin molecules into aggregates by modifying the aggregation pathway. At low sulfate concentrations (0–5 mM) insulin forms amyloid fibrils following the nucleated polymerization mechanism commonly observed under acidic conditions in the presence of monovalent anions. When the sulfate concentration is increased above 5 mM, the sulfate anion induces the salting-out of ∼18–20% of insulin molecules into reversible amorphous aggregates, which retain a large content of α-helix structures. During time these aggregates undergo structure rearrangements into β-sheet structures, which are able to recruit monomers and bind to the Thioflavin T dye. The alternative aggregation mechanism observed at large sulfate concentrations is characterized by a larger activation energy and leads to more polymorphic structures with respect to the self-assembly in the presence of chloride ions. The system shown in this work represents a case where amorphous aggregates on pathway to the formation of structures with amyloid features could be detected and analyzed.     

The osmolyte betaine promotes protein misfolding and disruption of protein aggregates

In this work the effect of betaine on the structure and aggregation of the GST-GFP fluorescent fusion protein was studied by different complementary techniques, including electron microscopy, dynamic light scattering, circular dichroism, and FTIR spectroscopy. Although osmolytes are known to be protein stabilizers in vivo, the effect of betaine on the structure and aggregation of our model protein was found to be strictly concentration dependent. We demonstrated that, by changing betaine concentration, it was possible to tune the formation of protein soluble assemblies and insoluble aggregates, as well as to disaggregate preformed aggregates. In particular, at a critical concentration of betaine between 5 and 7.5 mM, the protein precipitated into macroscopic prefibrillar structures, rich in intermolecular beta-sheets, which were found to bind thioflavine T and to be inaccessible to protease. Instead, at higher betaine concentration (10-20 mM) the misfolded protein lost its fluorescence, but formed soluble assemblies with hydrodynamic radius of about 16 nm. These structures displayed a reduced propensity to further aggregate under thermal treatment. In addition, betaine at this high concentration was also found to disrupt large preformed aggregates, obtained under different conditions, into protein soluble assemblies. It is the first time that a disaggregation process has been described for a chemical chaperone. A mechanism for the betaine concentration-dependent effect on protein misfolding, aggregation, and disaggregation is proposed and its possible physiological implications are discussed.     

Monitoring the process of HypF fibrillization and liposome permeabilization by protofibrils

Much information has appeared in the last few years on the low resolution structure of amyloid fibrils and on their non-fibrillar precursors formed by a number of proteins and peptides associated with amyloid diseases. The fine structure and the dynamics of the process leading misfolded molecules to aggregate into amyloid assemblies are far from being fully understood. Evidence has been provided in the last five years that protein aggregation and aggregate toxicity are rather generic processes, possibly affecting all polypeptide chains under suitable experimental conditions. This evidence extends the number of model proteins one can investigate to assess the molecular bases and general features of protein aggregation and aggregate toxicity. We have used tapping mode atomic force microscopy to investigate the morphological features of the pre-fibrillar aggregates and of the mature fibrils produced by the aggregation of the hydrogenase maturation factor HypF N-terminal domain (HypF-N), a protein not associated to any amyloid disease. We have also studied the aggregate-induced permeabilization of liposomes by fluorescence techniques. Our results show that HypF-N aggregation follows a hierarchical path whereby initial globules assemble into crescents; these generate large rings, which evolve into ribbons, further organizing into differently supercoiled fibrils. The early pre-fibrillar aggregates were shown to be able to permeabilize synthetic phospholipid membranes, thus showing that this disease-unrelated protein displays the same amyloidogenic behaviour found for the aggregates of most pathological proteins and peptides. These data complement previously reported findings, and support the idea that protein aggregation, aggregate structure and toxicity are generic properties of polypeptide chains.     

Formation of non-base-pairing DNA microgels using directed phase transition of amphiphilic monomers

Programmability of DNA sequences enables the formation of synthetic DNA nanostructures and their macromolecular assemblies such as DNA hydrogels. The base pair-level interaction of DNA is a foundational and powerful mechanism to build DNA structures at the nanoscale; however, its temperature sensitivity and weak interaction force remain a barrier for the facile and scalable assembly of DNA structures toward higher-order structures. We conducted this study to provide an alternative, non-base-pairing approach to connect nanoscale DNA units to yield micrometer-sized gels based on the sequential phase transition of amphiphilic unit structures. Strong electrostatic interactions between DNA nanostructures and polyelectrolyte spermines led to the formation of giant phase-separated aggregates of monomer units. Gelation could be initiated by the addition of NaCl, which weakened the electrostatic DNA-spermine interaction while attractive interactions between cholesterols created stable networks by crosslinking DNA monomers. In contrast to the conventional DNA gelation techniques, our system used solid aggregates as a precursor for DNA microgels. Therefore, in situ gelation could be achieved by depositing aggregates on the desired substrate and subsequently initiating a phase transition. Our approach can expand the utility and functionality of DNA hydrogels by using more complex nucleic acid assemblies as unit structures and combining the technique with top-down microfabrication methods.