Protein arrays and microarrays

In the past, studies of protein activities have focused on studying a single protein at a time, which is often time-consuming and expensive. Recently, with the sequencing of entire genomes, large-scale proteome analysis has begun. Arrays of proteins have been used for the determination of subcellular localization, analysis of protein-protein interactions and biochemical analysis of protein function. New protein-microarray technologies have been introduced that enable the high-throughput analysis of protein activities. These have the potential to revolutionize the analysis of entire proteomes.     

Protein microarrays and their applications

In recent years, the importance of proteomic works, such as protein expression, detection and identification, has grown in the fields of proteomic and diagnostic research. This is because complete genome sequences of humans, and other organisms, progress as cellular processing and controlling are performed by proteins as well as DNA or RNA. However, conventional protein analyses are time-consuming; therefore, high throughput protein analysis methods, which allow fast, direct and quantitative detection, are needed. These are so-called protein microarrays or protein chips, which have been developed to fulfill the need for high-throughput protein analyses. Although protein arrays are still in their infancy, technical development in immobilizing proteins in their native conformation on arrays, and the development of more sensitive detection methods, will facilitate the rapid deployment of protein arrays as high-throughput protein assay tools in proteomics and diagnostics. This review summarizes the basic technologies that are needed in the fabrication of protein arrays and their recent applications.     

Gold nanoparticle-based detection of genomic DNA targets on microarrays using a novel optical detection system

The development of a nanoparticle-based detection methodology for sensitive and specific DNA-based diagnostic applications is described. The technology utilizes gold nanoparticles derivatized with thiol modified oligonucleotides that are designed to bind complementary DNA targets. A glass surface with arrays of immobilized oligonucleotide capture sequences is used to capture DNA targets, which are then detected via hybridization to the gold nanoparticle probes. Amplification with silver allows for detection and quantitation by measuring evanescent wave induced light scatter with low-cost optical detection systems. Compared to Cy3-based fluorescence, silver amplified gold nanoparticle probes provide for a approximately 1000-fold increase in sensitivity. Furthermore, direct detection of non-amplified genomic DNA from infectious agents is afforded through increased specificity and even identification of single nucleotide polymorphisms (SNP) in human genomic DNA appears feasible.     

Protein microarrays for highly parallel detection and quantitation of specific proteins and antibodies in complex solutions

Background  

We have developed and tested a method for printing protein microarrays and using these microarrays in a comparative fluorescence assay to measure the abundance of many specific proteins in complex solutions. A robotic device was used to print hundreds of specific antibody or antigen solutions in an array on the surface of derivatized microscope slides. Two complex protein samples, one serving as a standard for comparative quantitation, the other representing an experimental sample in which the protein quantities were to be measured, were labeled by covalent attachment of spectrally resolvable fluorescent dyes.     

Protein microarrays for highly parallel detection and quantitation of specific proteins and antibodies in complex solutions

Background

We describe a method for printing protein microarrays, and using these microarrays in a comparative fluorescence assay to measure the abundance of many specific proteins in complex solutions. A robotic device was used to print hundreds of specific antibody or antigen solutions in an array on the surface of derivatized microscope slides. Two complex protein samples, one serving as a standard for comparative quantitation, and the other representing an experimental sample in which the concentrations of specific proteins were to be measured, were labeled by covalent attachment of spectrally-resolvable fluorescent dyes. Specific antibody-antigen interactions localized specific components of the complex mixtures to defined cognate spots in the array, where the relative intensity of the fluorescent signals representing the experimental sample and the reference standard provided a measure of each protein's abundance in the experimental sample. To characterize the specificity, sensitivity and accuracy of this assay, we analyzed the performance of 115 antibody/antigen pairs.

Results

50% of the arrayed antigens, and 20% of the arrayed antibodies, provided specific and accurate measurements of their cognate ligands at or below concentrations of 1.6 µg/ml and 0.34 µg/ml, respectively. Some of the antibody/antigen pairs allowed detection of the cognate ligands at absolute concentrations below 1 ng/ml, and partial concentrations of less than 1 part in 10⁶, sensitivities sufficient for measurement of many clinically important proteins in patient blood samples.

Conclusions

Protein microarrays can provide a simple and practical means to characterize patterns of variation in hundreds or thousands of different proteins, in clinical or research applications.     

Protein microarrays to study carbohydrate-recognition events

In order to expand areas in which protein microarrays can be used to solve important biological problems, we have investigated ways in which the technique can be employed for functional glycomics. Initially, our protein microarrays were used for the rapid identification of carbohydrate-binding proteins using trifunctional carbohydrate probes and fluorescent dye-labeled polysaccharides. Glycan probes were selectively bound to the corresponding lectins immobilized on the solid surface. In addition, these microarrays were also employed for profiling of carbohydrates on Jurkat T-cell surfaces. These cells adhered to ConA, RCA(120), SNA and WGA, indicating expression of alpha-Man, Gal, NeuNAcalpha2,6Gal and GlcNAc residues on their surfaces. Furthermore, we determined binding affinities between WGA and carbohydrates by measuring IC(50) values of GlcNAc that inhibited 50% of trivalent GlcNAc binding to WGA immobilized on the solid surface. All the experiments show that protein microarrays can be used to study carbohydrate-recognition events in the field of glycomics.     

Small-molecule microarrays: development of novel linkers and an efficient detection method for bound proteins

Novel isocyanate and diazoketone linkers possessing polyoxypropylenediamine as a spacer for small-molecule microrray are developed. White light interferometry is introduced to detect bound proteins on the glass slides without using chemically modified proteins.     

Protein microarrays discover angiotensinogen and PRKRIP1 as novel targets for autoantibodies in chronic renal disease

Biomarkers for early detection of chronic kidney disease are needed, as millions of patients suffer from chronic diseases predisposing them to kidney failure. Protein microarrays may also hold utility in the discovery of auto-antibodies in other conditions not commonly considered auto-immune diseases. We hypothesized that proteins are released as a consequence of damage at a cellular level during end-organ damage from renal injury, not otherwise recognized as self-antigens, and an adaptive humoral immune response to these proteins might be detected in the blood, as a noninvasive tracker of this injury. The resultant antibodies (Ab) detected in the blood would serve as effective biomarkers for occult renal injury, enabling earlier clinical detection of chronic kidney disease than currently possible, because of the redundancy of the serum creatinine as a biomarker for early kidney injury. To screen for novel autoantibodies in chronic kidney disease, 24 protein microarrays were used to compare serum Ab from patients with chronic kidney disease against matched controls. From a panel of 38 antigens with increased Ab binding, four were validated in 71 individuals, with (n=50) and without (n=21) renal insufficiency. Significant elevations in the titer of novel auto-Ab were noted against angiotensinogen and PRKRIP1 in renal insufficiency. Current validation is underway to evaluate if these auto-Ab can provide means to follow the evolution of chronic kidney disease in patients with early stages of renal insufficiency, and if these rising titers of these auto-Ab correlate with the rate of progression of chronic kidney disease.     

Protein microarrays: Reduced autofluorescence and improved LOD

In protein microarray performance, the choice of an appropriate surface is a crucial factor. Three‐dimensional substrates like nitrocellulose are known to have higher binding capacities than planar surfaces. Furthermore, they can enable the immobilization of proteins in a functional manner. One disadvantage of today's nitrocellulose‐based microarrays is the high background fluorescence, which can interfere with the detection of low‐abundance proteins. We have developed an innovative black nitrocellulose membrane‐based protein microarray that exhibits low autofluorescence in combination with increased sensitivity and improved LOD (limit of detection). The applicability of the novel material was demonstrated with main focus on reversed‐phase microarray experiments. In comparison to various commercially available microarrays, a higher sensitivity in regard to the spotted protein was achieved. In contrast to other porous nitrocellulose‐based microarrays, the black nitrocellulose provides a significant lower autofluorescence and background intensity.     

Modeling and simulation of luminescence detection platforms

Motivated by the design of an integrated CMOS-based detection platform, a simulation model for CCD and CMOS imager-based luminescence detection systems is developed. The model comprises four parts. The first portion models the process of photon flux generation from luminescence probes using ATP-based and luciferase label-based assay kinetics. An optics simulator is then used to compute the incident photon flux on the imaging plane for a given photon flux and system geometry. Subsequently, the output image is computed using a detailed imaging sensor model that accounts for photodetector spectral response, dark current, conversion gain, and various noise sources. Finally, signal processing algorithms are applied to the image to enhance detection reliability and hence increase the overall system throughput. To validate the model, simulation results are compared to experimental results obtained from a CCD-based system that was built to emulate the integrated CMOS-based platform.     

Label-free detection methods for protein microarrays

With the growth of the "-omics" such as functional genomics and proteomics, one of the foremost challenges in biotechnologies has become the development of novel methods to monitor biological process and acquire the information of biomolecular interactions in a systematic manner. To fully understand the roles of newly discovered genes or proteins, it is necessary to elucidate the functions of these molecules in their interaction network. Microarray technology is becoming the method of choice for such a task. Although protein microarray can provide a high throughput analytical platform for protein profiling and protein-protein interaction, most of the current reports are limited to labeled detection using fluorescence or radioisotope techniques. These limitations deflate the potential of the method and prevent the technology from being adapted in a broader range of proteomics applications. In recent years, label-free analytical approaches have gone through intensified development and have been coupled successfully with protein microarray. In many examples of label-free study, the microarray has not only offered the high throughput detection in real time, but also provided kinetics information as well as in situ identification. This article reviews the most significant label-free detection methods for microarray technology, including surface plasmon resonance imaging, atomic force microscope, electrochemical impedance spectroscopy and MS and their applications in proteomics research.     

Protein microarrays as tools for functional proteomics

Protein microarrays present an innovative and versatile approach to study protein abundance and function at an unprecedented scale. Given the chemical and structural complexity of the proteome, the development of protein microarrays has been challenging. Despite these challenges there has been a marked increase in the use of protein microarrays to map interactions of proteins with various other molecules, and to identify potential disease biomarkers, especially in the area of cancer biology. In this review, we discuss some of the promising advances made in the development and use of protein microarrays.     

Colorimetric silver detection of DNA microarrays

Development of microarrays has revolutionized gene expression analysis and molecular diagnosis through miniaturization and the multiparametric features. Critical factors affecting detection efficiency of targets hybridization on microarray are the design of capture probes, the way they are attached to the support, and the sensitivity of the detection method. Microarrays are currently detected in fluorescence using a sophisticated confocal laser-based scanner. In this work, we present a new colorimetric detection method which is intented to make the use of microarray a powerful procedure and a low-cost tool in research and clinical settings. The signal generated with this method results from the precipitation of silver onto nanogold particles bound to streptavidin, the latter being used for detecting biotinylated DNA. This colorimetric method has been compared to the Cy-3 fluorescence method. The detection limit of both methods was equivalent and corresponds to 1 amol of biotinylated DNA attached on an array. Scanning and data analysis of the array were obtained with a colorimetric-based workstation.     

Protein microarrays for gene expression and antibody screening.

Proteins translate genomic sequence information into function, enabling biological processes. As a complementary approach to gene expression profiling on cDNA microarrays, we have developed a technique for high-throughput gene expression and antibody screening on chip-size protein microarrays. Using a picking/spotting robot equipped with a new transfer stamp, protein solutions were gridded onto polyvinylidene difluoride filters at high density. Specific purified protein was detected on the filters with high sensitivity (250 amol or 10 pg of a test protein). On a microarray made from bacterial lysates of 92 human cDNA clones expressed in a microtiter plate, putative protein expressors could be reliably identified. The rate of false-positive clones, expressing proteins in incorrect reading frames, was low. Product specificity of selected clones was confirmed on identical microarrays using monoclonal antibodies. Cross-reactivities of some antibodies with unrelated proteins imply the use of protein microarrays for antibody specificity screening against whole libraries of proteins. Because this application would not be restricted to antigen-antibody systems, protein microarrays should provide a general resource for high-throughput screens of gene expression and receptor-ligand interactions.     

Protein microarrays: promising tools for proteomic research

Miniaturized and parallelized ligand binding assays are of great interest in postgenomic research because microarray technology allows the simultaneous determination of a large number of parameters from a minute amount of sample within a single experiment. Assay systems based on this technology are used for the identification and quantification of proteins as well as for the study of protein interactions. Protein affinity assays have been implemented that allow the analysis of interactions between proteins with other proteins, peptides, low molecular weight compounds, oligosaccharides or DNA. Microarray technology is an emerging technology used in global analytical approaches and has a considerable impact on proteomic research.     

Fluorescence detection methods for microfluidic droplet platforms

The development of microfluidic platforms for performing chemistry and biology has in large part been driven by a range of potential benefits that accompany system miniaturisation. Advantages include the ability to efficiently process nano- to femoto- liter volumes of sample, facile integration of functional components, an intrinsic predisposition towards large-scale multiplexing, enhanced analytical throughput, improved control and reduced instrumental footprints.¹In recent years much interest has focussed on the development of droplet-based (or segmented flow) microfluidic systems and their potential as platforms in high-throughput experimentation.^2-4 Here water-in-oil emulsions are made to spontaneously form in microfluidic channels as a result of capillary instabilities between the two immiscible phases. Importantly, microdroplets of precisely defined volumes and compositions can be generated at frequencies of several kHz. Furthermore, by encapsulating reagents of interest within isolated compartments separated by a continuous immiscible phase, both sample cross-talk and dispersion (diffusion- and Taylor-based) can be eliminated, which leads to minimal cross-contamination and the ability to time analytical processes with great accuracy. Additionally, since there is no contact between the contents of the droplets and the channel walls (which are wetted by the continuous phase) absorption and loss of reagents on the channel walls is prevented.Once droplets of this kind have been generated and processed, it is necessary to extract the required analytical information. In this respect the detection method of choice should be rapid, provide high-sensitivity and low limits of detection, be applicable to a range of molecular species, be non-destructive and be able to be integrated with microfluidic devices in a facile manner. To address this need we have developed a suite of experimental tools and protocols that enable the extraction of large amounts of photophysical information from small-volume environments, and are applicable to the analysis of a wide range of physical, chemical and biological parameters. Herein two examples of these methods are presented and applied to the detection of single cells and the mapping of mixing processes inside picoliter-volume droplets. We report the entire experimental process including microfluidic chip fabrication, the optical setup and the process of droplet generation and detection.     

Application of resequencing microarrays in microbial detection and characterization

Microarrays are powerful, highly parallel assays that are transforming microbiological diagnostics and research. The adaptation of microarray-based resequencing technology for microbial detection and characterization resulted in the development of a number assays that have unique advantages over other existing technologies. This technological platform seems to be especially useful for sensitive and high-resolution multiplexed diagnostics for clinical syndromes with similar symptoms, screening environmental samples for biothreat agents, as well as genotyping and whole-genome analysis of single pathogens.