Ultrafiltration-based techniques for rapid and simultaneous concentration of multiple microbe classes from 100-L tap water samples

This study focused on ultrafiltration as a technique for simultaneously concentrating and recovering viruses, bacteria and parasites in 100-L drinking water samples. A chemical dispersant, sodium polyphosphate, and Tween 80 were used to increase microbial recovery efficiencies. Secondary concentration was performed to reduce sample volumes to 3-5 mL for analysis using tissue culture, microscopy, and real-time PCR and RT-PCR. At seeding levels of 100-1000 (CFU, PFU, oocysts, or particles), a "high-flux" ultrafiltration procedure was found to achieve mean recoveries of 51-94% of simultaneously seeded MS2 bacteriophage, echovirus 1, Salmonella enterica subsp. enterica serovar Typhimurium, Bacillus atrophaeus subsp. globigii endospores, Cryptosporidium parvum oocysts, and 4.5-mum microspheres. When 4-7% of the final sample concentrate volume was assayed using real-time PCR and RT-PCR, overall method sensitivities were <100 C. parvum oocysts, <240 PFU echovirus 1, <100 CFU Salmonella and approximately 160 CFU B. atrophaeus spores in 100-L drinking water samples. The "high-flux" ultrafiltration procedure required approximately 2 h, including time required for backflushing. Secondary concentration procedures required an additional 1-3 h, while nucleic acid extraction and real-time PCR procedures required an additional 2-2.5 h. Thus, this study demonstrated that efficient recovery and sensitive detection of diverse microbes in 100-L drinking water samples could be achieved within 5-8 h using ultrafiltration, rapid secondary processing techniques, and real-time PCR.     

Detection of infectious Cryptosporidium parvum oocysts in surface and filter backwash water samples by immunomagnetic separation and integrated cell culture-PCR.

A new strategy for the detection of infectious Cryptosporidium parvum oocysts in water samples, which combines immunomagnetic separation (IMS) for recovery of oocysts with in vitro cell culturing and PCR (CC-PCR), was field tested with a total of 122 raw source water samples and 121 filter backwash water grab samples obtained from 25 sites in the United States. In addition, samples were processed by Percoll-sucrose flotation and oocysts were detected by an immunofluorescence assay (IFA) as a baseline method. Samples of different water quality were seeded with viable C. parvum to evaluate oocyst recovery efficiencies and the performance of the CC-PCR protocol. Mean method oocyst recoveries, including concentration of seeded 10-liter samples, from raw water were 26.1% for IMS and 16.6% for flotation, while recoveries from seeded filter backwash water were 9.1 and 5.8%, respectively. There was full agreement between IFA oocyst counts of IMS-purified seeded samples and CC-PCR results. In natural samples, CC-PCR detected infectious C. parvum in 4.9% (6) of the raw water samples and 7.4% (9) of the filter backwash water samples, while IFA detected oocysts in 13.1% (16) of the raw water samples and 5.8% (7) of the filter backwash water samples. All CC-PCR products were confirmed by cloning and DNA sequence analysis and were greater than 98% homologous to the C. parvum KSU-1 hsp70 gene product. DNA sequence analysis also revealed reproducible nucleotide substitutions among the hsp70 fragments, suggesting that several different strains of infectious C. parvum were detected.     

Evaluation of an alternative IMS dissociation procedure for use with Method 1622: detection of Cryptosporidium in water

U.S. EPA Methods 1622 and 1623 are used to detect and quantify Cryptosporidium oocysts in water. The protocol consists of filtration, immunomagnetic separation (IMS), staining with a fluorescent antibody, and microscopic analysis. Microscopic analysis includes detection by fluorescent antibody and confirmation by the demonstration of 1-4 sporozoites or nuclei after staining with 4',6-diamidino-2-phenyl indole dihydrochloride (DAPI). The purpose of this study was to evaluate a new IMS dissociation, a 10-min incubation at 80 degrees C. Heat dissociation improved the average oocyst recovery from 41% to 71% in seeded reagent water, and from 10% to 51% in seeded river samples. The average DAPI confirmation rate improved from 49% to 93% in reagent water, and from 48% to 73% in river samples. This modification improved both oocyst recovery and confirmation.     

Evaluation of methods for improved detection of Cryptosporidium spp. in mussels (Mytilus californianus)

Bivalve molluscs concentrate Cryptosporidium oocysts from fecal-contaminated aquatic environments and are therefore useful in monitoring water quality. A real-time TaqMan polymerase chain reaction (PCR) system was developed to allow for large scale quantitative detection of Cryptosporidium spp. in mussels (Mytilus californianus). The TaqMan sensitivity and specificity were compared to conventional PCR and direct immunofluorescent antibody (DFA) assays, with and without immunomagnetic separation (IMS), to identify the best method for parasite detection in mussel hemolymph, gill washings and digestive glands. TaqMan PCR and two conventional PCR systems all detected 1 or more oocysts spiked into 1 ml hemolymph samples. The minimum oocyst detection limit in spiked 5 ml gill wash and 1 g digestive gland samples tested by TaqMan PCR and DFA was 100 oocysts, with a 1 log(10) improvement when samples were first processed by IMS. For tank exposed mussels, TaqMan and conventional PCR methods detected C. parvum in <5% of hemolymph samples. No gill washings from these same mussels tested positive by TaqMan PCR or DFA analysis even with IMS concentration. All methods detected the highest prevalence of C. parvum-positive samples in digestive gland tissues of exposed mussels. In conclusion, the most sensitive method for the detection of C. parvum in oocyst-exposed mussels was IMS concentration with DFA detection: 80% of individual and 100% of pooled digestive gland samples tested positive. TaqMan PCR was comparable to conventional PCR for detection of C. parvum oocysts in mussels and additionally allowed for automated testing, high throughput, and semi-quantitative results.     

Development of an immunomagnetic separation-polymerase chain reaction (IMS-PCR) assay specific for Enterocytozoon bieneusi in water samples

AIMS: Microsporidia have become widely recognized as important human pathogens. Among Microsporidia, Enterocytozoon bieneusi is responsible for severe gastrointestinal disease. To date, no current therapy has been proven effective. Their mode of transmission and environmental occurrence are poorly documented because of the lack of detection methods that are both species-specific and sensitive. In this study, we developed a sensitive and specific molecular method to detect E. bieneusi spores in water samples. METHODS AND RESULTS: The molecular assay combined immunomagnetic separation (IMS) and polymerase chain reaction (PCR) amplification to detect E. bieneusi spores. A comparison was made of IMS magnetic beads coated with two different monoclonal antibodies, one specific for the Encephalitozoon genus that cross-reacts with E. bieneusi and the other specific only for the E. bieneusi species itself. CONCLUSIONS: Immunotech beads coated with the antibody specific for E. bieneusi were found to be the most effective combination. SIGNIFICANCE AND IMPACT OF THE STUDY: The highly specific IMS-PCR assay developed in this study provides a rapid and sensitive means of screening water samples for the presence of E. bieneusi spores.     

Detection and Tracking of a Novel Genetically Tagged Biological Simulant in the Environment

A variant of Bacillus thuringiensis subsp. kurstaki containing a single, stable copy of a uniquely amplifiable DNA oligomer integrated into the genome for tracking the fate of biological agents in the environment was developed. The use of genetically tagged spores overcomes the ambiguity of discerning the test material from pre-existing environmental microflora or from previously released background material. In this study, we demonstrate the utility of the genetically “barcoded” simulant in a controlled indoor setting and in an outdoor release. In an ambient breeze tunnel test, spores deposited on tiles were reaerosolized and detected by real-time PCR at distances of 30 m from the point of deposition. Real-time PCR signals were inversely correlated with distance from the seeded tiles. An outdoor release of powdered spore simulant at Aberdeen Proving Ground, Edgewood, MD, was monitored from a distance by a light detection and ranging (LIDAR) laser. Over a 2-week period, an array of air sampling units collected samples were analyzed for the presence of viable spores and using barcode-specific real-time PCR assays. Barcoded B. thuringiensis subsp. kurstaki spores were unambiguously identified on the day of the release, and viable material was recovered in a pattern consistent with the cloud track predicted by prevailing winds and by data tracks provided by the LIDAR system. Finally, the real-time PCR assays successfully differentiated barcoded B. thuringiensis subsp. kurstaki spores from wild-type spores under field conditions.     

A combined immunomagnetic separation and lateral flow method for a sensitive on-site detection of Bacillus anthracis spores – assessment in water and dairy products

Aim:  Combination of immunomagnetic separation (IMS) and lateral flow device (LFD) assays for the development of a sensitive, rapid, on-site methodology that enables concentration and detection of Bacillus anthracis spores in complex samples.
Methods and Results:  The data presents the development of an optimized, 30 min, IMS assay, with about 95% capture of B. anthracis spores from different dairy products ( n  = 38). No cross reactivity was detected with typical milk flora and some closely related Bacilli. To enable direct application of the IMS captured spores on the LFD, spores were eluted from the bead–spore complex utilizing 95% (v/v) formamide-10 mmol l⁻¹ EDTA for 30 s in a microwave oven. Detached spores were analysed on LFD enabling detection within 10 min. The combined IMS–LFD methodology (40 min) demonstrates a 60-fold improvement in sensitivity, relative to samples that were applied directly on the LFD without the IMS concentrating step.
Conclusions:  The IMS–LFD method is a powerful platform, combining rapidity, specificity and efficiency for concentrating and detecting B. anthracis from water and milk contaminated samples.
Significant and Impact of the Study:  The combination of IMS and LFD enhances the sensitivity and flexibility of B. anthracis spore detection from complex samples. This method can potentially be extended to other toxins and micro-organisms in a variety of matrices.     

An immunomagnetic separation-real-time PCR method for quantification of Cryptosporidium parvum in water samples

The protozoan parasite Cryptosporidium parvum is known to occur widely in both raw and drinking water and is the cause of waterborne outbreaks of gastroenteritis throughout the world. The routinely used method for the detection of Cryptosporidium oocysts in water is based on an immunofluorescence assay (IFA). It is both time-consuming and nonspecific for the human pathogenic species C. parvum. We have developed a TaqMan polymerase chain reaction (PCR) test that accurately quantifies C. parvum oocysts in treated and untreated water samples. The protocol consisted of the following successive steps: Envirochek capsule filtration, immunomagnetic separation (IMS), thermal lysis followed by DNA purification using Nanosep centrifugal devices and, finally, real-time PCR using fluorescent TaqMan technology. Quantification was accomplished by comparing the fluorescence signals obtained from test samples with those from standard dilutions of C. parvum oocysts. This IMS-real-time PCR assay permits rapid and reliable quantification over six orders of magnitude, with a detection limit of five oocysts for purified oocyst solutions and eight oocysts for spiked water samples. Replicate samples of spiked tap water and Seine River water samples (with approximately 78 and 775 oocysts) were tested. C. parvum oocyst recoveries, which ranged from 47.4% to 99% and from 39.1% to 68.3%, respectively, were significantly higher and less variable than those reported using the traditional US Environmental Protection Agency (USEPA) method 1622. This new molecular method offers a rapid, sensitive and specific alternative for C. parvum oocyst quantification in water.     

Detection of the nec1 virulence gene and its correlation with pathogenicity in Streptomyces species on potato tubers and in soil using conventional and real-time PCR

AIMS: To evaluate the virulence gene nec1 as a reliable marker for the detection of pathogenic Streptomyces species on potato tubers and in soil samples using conventional and real-time quantitative PCR assays. Methods AND RESULTS: Two pairs of conventional primers (outer and nested) and one set of primers/probe for use in real-time PCR were designed to detect the necrogenic protein encoding nec1 gene of Streptomyces scabiei strain ATCC 49173(T). The conventional PCR primers were also incorporated into a multiplex PCR assay to simultaneously detect the nec1 gene in conjunction with the potato pathogens Helminthosporium solani and Colletotrichum coccodes. The specificity of each PCR assay was confirmed by testing 32 pathogenic and nonpathogenic reference strains of Streptomyces representing 12 different species and 74 uncharacterized streptomycete strains isolated from diseased tubers. A clear correlation between pathogenicity and the detection of nec1 by PCR was demonstrated. The sensitivity and specificity of both the conventional and real-time PCR assays allowed the detection of nec1 on potato tubers in the absence of visible symptoms of common scab, and in seeded soil down to a level equivalent to three S. scabiei spores per gram soil. CONCLUSIONS: Reliable and quantitative PCR techniques were developed in this study for the specific detection of the virulence gene nec1 of pathogenic Streptomyces species on potato tubers and in soil samples, and the data demonstrated a clear correlation between pathogenicity in Streptomyces species and the presence of the nec1 gene. SIGNIFICANCE AND IMPACT OF THE STUDY: Together with the DNA extraction protocols, these diagnostic methods will allow a rapid and accurate assessment of tuber and soil contamination by pathogenic Streptomyces species.     

Detection and discrimination of Cryptosporidium parvum and C. hominis in water samples by immunomagnetic separation-PCR

Cryptosporidium parvum and C. hominis have been the cause of large and serious outbreaks of waterborne cryptosporidiosis. A specific and sensitive recovery-detection method is required for control of this pathogen in drinking water. In the present study, nested PCR-restriction fragment length polymorphism (RFLP), which targets the divergent Cpgp40/15 gene, was developed. This nested PCR detected only the gene derived from C. parvum and C. hominis strains, and RFLP was able to discriminate between the PCR products from C. parvum and C. hominis. To evaluate the sensitivity of nested PCR, C. parvum oocysts inoculated in water samples of two different turbidities were recovered by immunomagnetic separation (IMS) and detected by nested PCR and fluorescent antibody assay (FA). Genetic detection by nested PCR and oocyst number confirmed by FA were compared, and the results suggested that detection by nested PCR depends on the confirmed oocyst number and that nested PCR in combination with IMS has the ability to detect a single oocyst in a water sample. We applied an agitation procedure with river water solids to which oocysts were added to evaluate the recovery and detection by the procedure in environmental samples and found some decrease in the rate of detection by IMS.     

Detection of Infectious Cryptosporidium parvum Oocysts in Surface and Filter Backwash Water Samples by Immunomagnetic Separation and Integrated Cell Culture-PCR

A new strategy for the detection of infectious Cryptosporidium parvum oocysts in water samples, which combines immunomagnetic separation (IMS) for recovery of oocysts with in vitro cell culturing and PCR (CC-PCR), was field tested with a total of 122 raw source water samples and 121 filter backwash water grab samples obtained from 25 sites in the United States. In addition, samples were processed by Percoll-sucrose flotation and oocysts were detected by an immunofluorescence assay (IFA) as a baseline method. Samples of different water quality were seeded with viable C. parvum to evaluate oocyst recovery efficiencies and the performance of the CC-PCR protocol. Mean method oocyst recoveries, including concentration of seeded 10-liter samples, from raw water were 26.1% for IMS and 16.6% for flotation, while recoveries from seeded filter backwash water were 9.1 and 5.8%, respectively. There was full agreement between IFA oocyst counts of IMS-purified seeded samples and CC-PCR results. In natural samples, CC-PCR detected infectious C. parvum in 4.9% (6) of the raw water samples and 7.4% (9) of the filter backwash water samples, while IFA detected oocysts in 13.1% (16) of the raw water samples and 5.8% (7) of the filter backwash water samples. All CC-PCR products were confirmed by cloning and DNA sequence analysis and were greater than 98% homologous to the C. parvum KSU-1 hsp70 gene product. DNA sequence analysis also revealed reproducible nucleotide substitutions among the hsp70 fragments, suggesting that several different strains of infectious C. parvum were detected.     

Fluorescent in situ detection of Encephalitozoon hellem spores with a 6-carboxyfluorescein-labeled ribosomal RNA-targeted oligonucleotide probe

A fluorescent in situ hybridization assay has been developed for the detection of the human-pathogenic microsporidian, Encephalitozoon hellem in water samples using epifluorescence microscopy. The assay employs a 19-nucleotide species-specific 6-carboxyfluorescein-labeled oligonucleotide probe, HEL878F, designed to be complementary to the nucleic acid sequence 878-896, a highly variable segment of the 16S ribosomal RNA of E. hellem spores. The specificity of this probe for its ribosomal RNA target site was confirmed using RNA degradation, ribosomal RNA target site competition, and nucleotide base mismatch control probe assays. Furthermore, the specificity of the HEL878F oligonucleotide probe for E. hellem spores was established when it was evaluated on spores from all three species of the genus Encephalitozoon that had been seeded in reagent water and environmental water concentrates. The specificity of the HEL878F oligonucleotide probe was further corroborated when tested on algae, bacteria, and protozoa commonly found in environmental water. The study demonstrates the applicability of a fluorescent in situ hybridization assay using a species-specific fluorescent-labeled oligonucleotide probe for the detection of E. hellem spores in water samples.     

Sensitive and rapid quantitative detection of anthrax spores isolated from soil samples by real-time PCR

Quantitative analysis of anthrax spores from environmental samples is essential for accurate detection and risk assessment since Bacillus anthracis spores have been shown to be one of the most effective biological weapons. Using TaqMan real-time PCR, specific primers and probes were designed for the identification of pathogenic B. anthracis strains from pag gene and cap gene on two plasmids, pXO1 and pXO2, as well as a sap gene encoded on the S-layer. To select the appropriate lysis method of anthrax spore from environmental samples, several heat treatments and germination methods were evaluated with multiplex-PCR. Among them, heat treatment of samples suspended with sucrose plus non-ionic detergent was considered an effective spore disruption method because it detected up to 10(5) spores/g soil by multiplex-PCR. Serial dilutions of B. anthracis DNA and spore were detected up to a level of 0.1 ng/ microliters and 10 spores/ml, respectively, at the correlation coefficient of 0.99 by real-time PCR. Quantitative analysis of anthrax spore could be obtained from the comparison between C(T) value and serial dilutions of soil sample at the correlation coefficient of 0.99. Additionally, spores added to soil samples were detected up to 10(4) spores/g soil within 3 hr by real-time PCR. As a consequence, we established a rapid and accurate detection system for environmental anthrax spores using real-time PCR, avoiding time and labor-consuming preparation steps such as enrichment culturing and DNA preparation.     

Detection of the nifH gene of Methanobrevibacter smithii: a potential tool to identify sewage pollution in recreational waters

AIMS: The goal of this study was to develop and test the efficacy of a PCR assay for the environmental detection of the nifH gene of Methanobrevibacter smithii, a methanogen found in human faeces and sewage. METHODS AND RESULTS: PCR primers for the nifH gene of M. smithii were designed, tested and used to detect the presence or absence of this organism in faecal and environmental samples. Specificity analysis showed that the Mnif primers amplified products only in M. smithii pure culture strains (100%), human faeces (29%), human sewage samples (93%) and sewage-contaminated water samples (100%). No amplification was observed when primers were tested against 43 bacterial stock cultures, 204 animal faecal samples, 548 environmental bacterial isolates and water samples from a bovine waste lagoon and adjacent polluted creek. Sequencing of PCR products from sewers demonstrated that a 222-bp product was the nifH gene of M. smithii. The minimal amount of total DNA required for the detection of M. smithii was 10 ng for human faeces, 10 ng for faecally contaminated water and 5 ng for sewage. Recreational water seeded with M. smithii established a lower detection limit of 13 cells ml(-1). CONCLUSIONS: The Mnif assay developed during this investigation showed successful detection of M. smithii in individual human faecal samples, sewage and sewage-contaminated water but not in uncontaminated marine water or bovine-contaminated waters. The Mnif assay appears to be a potentially useful method to detect sewage-polluted coastal waters. SIGNIFICANCE AND IMPACT OF THE STUDY: This study was the first to utilize methanogens as an indicator of sewage pollution. Mnif PCR detection of M. smithii was shown to be a rapid, inexpensive and reliable test for determining the presence or absence of sewage pollution in coastal recreational waters.     

Performances of the immunomagnetic separation method for Cryptosporidium in water under various operation conditions.

Immunomagnetic separation (IMS) has been specified as a standard method for the measurement of Cryptosporidium in some countries. In this study, the IMS method was evaluated on the basis of the recovery efficiencies of Cryptosporidium oocysts at various IMS operation conditions. The average recovery for different Cryptosporidium concentrations in deionized water was 82.6 +/- 18.2% (n = 52). No significant change in recovery was observed by altering the debris ratio of the water samples. The efficiency was increased by prolonging the reaction time, and by increasing the amount of immunomagnetic beads. The recoveries of oocysts seeded in an Eppendorf with a small reaction volume were similar to those seeded in glass tubes with 10 times the reaction volume. The recovery efficiency of oocysts was reduced significantly when the reaction buffer was replaced by PBS. In conclusion, this method has good reproducibility and high recovery.     

Multiplex PCR detection of clinical and environmental strains of Vibrio vulnificus in shellfish

In this study, we developed a PCR-based rapid detection method for clinically important pathogenic strains of Vibrio vulnificus. Positive amplification of the 504-bp viuB fragment was seen in all 22 clinical isolates tested but only in 8 out of 33 environmental isolates. The combination of the species-specific 205-bp vvh fragment along with viuB in a multiplexed PCR enabled us to confirm the presence of potentially pathogenic strains of V. vulnificus. No amplification of other Vibrio spp. or non-Vibrio bacteria was evidenced, suggesting a high specificity of detection by this method. The sensitivity of detection for both targeted genes was 10 pg of purified DNA, which correlated with 10(3) V. vulnificus CFU in 1 mL of pure culture or 1 g un-enriched seeded oyster tissue homogenate. This sensitivity was improved to 1 CFU per gram of oyster tissue homogenate in overnight-enriched samples. A SYBR Green I based real-time PCR method was also developed that was shown to produce results consistent with the conventional PCR method. Application of the multiplexed real-time PCR to natural oyster tissue homogenates exhibited positive detection of vvh in 51% of the samples collected primarily during the summer months; however, only 15% of vvh positive samples exhibited viuB amplicons. The rapid, sensitive, and specific detection of clinically important pathogenic V. vulnificus in shellfish would be beneficial in reducing illnesses and deaths caused by this pathogen.     

Application of real-time PCR for quantitative detection of Clostridium botulinum type A toxin gene in food

The TaqMan real-time PCR method for the quantitative detection of C. botulinum type A was developed based on sequence-specific hybridization probes. The validity of this assay was verified by using 10 genera of 20 strains, including reference strains of C. botulinum types A, B, C, D, E and F. The detection limit of this assay was evaluated on C. botulinum type A, using a 10-fold dilution series of DNA and spores . The DNA and spores were detected up to level of 0.1 ng/ml and 10(2)spores/ml, respectively. Spore spiked food sample preparation prior to the real-time PCR was performed by two methods, heat treatment and GuSCN. The detection limits after heat treatment showed 10(2) spores/ml for spiked sausage slurry, and 10(3) spores/ml for spiked canned corn slurry, while detection limits after GuSCN precipitation showed 10(2) spores/ml in both sausage and canned corn. Therefore the real-time PCR assay after GuSCN precipitation is useful for the quantification of C. botulinum type A because it showed identical CT values in both pure spore solutions and food slurries. We suggest that quantitative analysis of C. botulinum type A by TaqMan real-time PCR can be a rapid and accurate assessment method for botulinal risk in food samples.     

Evaluation of DNA extraction methods for Bacillus anthracis spores isolated from spiked food samples

Aims

Nine commercial DNA extraction kits were evaluated for the isolation of DNA from 10‐fold serial dilutions of Bacillus anthracis spores using quantitative real‐time PCR (qPCR). The three kits determined by qPCR to yield the most sensitive and consistent detection (Epicenter MasterPure Gram Positive; MoBio PowerFood; ABI PrepSeq) were subsequently tested for their ability to isolate DNA from trace amounts of B. anthracis spores (approx. 6·5 × 10¹ and 1·3 × 10² CFU in 25 ml or 50 g of food sample) spiked into complex food samples including apple juice, ham, whole milk and bagged salad and recovered with immunomagnetic separation (IMS).

Methods and Results

The MasterPure kit effectively and consistently isolated DNA from low amounts of B. anthracis spores captured from food samples. Detection was achieved from apple juice, ham, whole milk and bagged salad from as few as 65 ± 14, 68 ± 8, 66 ± 4 and 52 ± 16 CFU, respectively, and IMS samples were demonstrated to be free of PCR inhibitors.

Conclusions

Detection of B. anthracis spores isolated from food by IMS differs substantially between commercial DNA extraction kits; however, sensitive results can be obtained with the MasterPure Gram Positive kit.

Significance and Impact of the Study

The extraction protocol identified herein combined with IMS is novel for B. anthracis and allows detection of low levels of B. anthracis spores from contaminated food samples.     

Detecting low concentrations of Shigella sonnei in environmental water samples by PCR

Outbreaks of Shigella sonnei associated with contaminated water have been reported and methods for the simultaneous detection of Shigellae and enteroinvasive Escherichia coli in water samples have been developed with detection limits of 10(1)-10(2) CFU mL(-1) of water. Because 10(1)-10(2)Shigellae can cause disease, a more sensitive detection method as an addition to the existing methods for detection of Shigella sonnei in water samples is reported here. Initially, 33 Shigella sonnei and 72 non-Shigella sonnei isolates were tested and one primer pair was found capable of specifically amplifying a 369-bp insertion sequence 1 (IS1) fragment from all 33 Shigella sonnei isolates and one Shigella dysenteriae ATCC isolate by PCR. The detection method was developed, which included filtration of 50 mL of water through a membrane and application of PCR to the membrane using this primer pair. Environmental water samples with total bacterial numbers of 384-2.84 x 10(7) CFU L(-1) were collected and seeded with 13 Shigella sonnei and the Shigella dysenteriae ATCC isolates. Detection limits were determined as 1.7-24.7 and 270-8000 CFU per 50 mL of water, respectively, using this detection method.