Biomechanical and morphometric properties of the arterial wall referenced to the zero-stress state in experimental diabetes

Morphometric and passive biomechanical properties were studied in isolated segments of the thoracic and abdominal aorta, left common carotid artery, left femoral artery and the left pulmonary artery in 20 non-diabetic and 28 streptozotocin (STZ)-induced diabetic rats. The diabetic and non-diabetic rats were divided into groups living 1, 4, 8, and 12 weeks after the induction of diabetes (n = 7 for each diabetic group) or sham injection (n = 5 for each group). The mechanical test was performed as a distension experiment where the proximal end of the arterial segment was connected via a tube to the container used for applying pressures to the segment and the distal end was left free. The vessel diameter and length were obtained from digitized images of the arterial segments at pre-selected pressures and at no-load and zero-stress states. Circumferential and longitudinal stresses (force per area) and strains (deformation) were computed from the length, diameter and pressure data and from the zero-stress state data. The zero-stress state was obtained by cutting vessel rings radially causing the rings to open up into a sector. Diabetes was associated with pronounced morphometric changes, e.g., wall thickness. With respect to the biomechanical data, the opening angle increased and reached a plateau in 4 weeks after which it decreased again (p < 0.05). The opening angle was smallest in the thoracic aorta and largest in the pulmonary artery. Furthermore, it was found that the circumferential stiffness of the arteries studied increased with the duration of diabetes. In the longitudinal direction significant differences were found 8 weeks after injection of STZ in all arteries except the pulmonary artery. In the 12 weeks group, the femoral artery was stiffest in the circumferential direction whereas the thoracic aorta was stiffest in the longitudinal direction. The accumulated serum glucose level correlated with the arterial wall thickness and elastic modulus (correlation coefficient between 0.56 and 0.81).     

Shear modulus of porcine coronary artery: contributions of media and adventitia

The epicardial coronary arteries experience significant torsion in the axial direction due to changes in the shape of the heart during the cardiac cycle. The objective of this study was to determine the torsional mechanical properties of the coronary arteries under various circumferential and longitudinal loadings. The coronary artery was treated as a two-layer composite vessel consisting of intima-medial and adventitial layers, and the shear modulus of each layer was determined. Eight porcine hearts were obtained at a local abattoir, and their right coronary and left anterior descending arteries were isolated and tested in vitro with a triaxial torsion machine (inflation, longitudinal stretch, and circumferential twist). After the intact vessel was tested, the adventitia was dissected away, leaving an intact media that was then tested under identical triaxial loading conditions. We proposed a biomechanical analysis to compute the shear modulus of the adventitia from the measured shear moduli of the intact vessel and the media. To validate our predictions, we used four additional hearts in which the shear modulus of the adventitia was measured after dissection of media. Our results show that the shear modulus does not depend on the shear stress or strain but varies linearly with circumferential and longitudinal stresses and in a nonlinear way with the corresponding strains. Furthermore, we found that the shear modulus of the adventitia is larger than that of the intact vessel, which is larger than the vessel media. These results may have important implications for baroreceptor sensitivity, circulation of the vasa vasorum, and coronary dissection.     

Distribution of the pulmonary artery and vein in the chimpanzee lung

Lungs of two chimpanzees (Pan troglodytes) were examined. The right pulmonary artery runs across the ventral side of the right upper lobe bronchiole and, then across the dorsal side of the right middle lobe bronchiole. Thereafter, it runs between the dorsal bronchiole system and the lateral bronchiole system, along the right bronchus. During its course, it gives off arterial branches which run along each bronchiole. The left pulmonary artery runs across the dorsal side of the left middle lobe bronchiole and then between the dorsal bronchiole system and the lateral bronchiole system. The branches of the pulmonary artery run mainly along the dorsal or lateral side of the bronchiole. The pulmonary veins run mainly along the ventral or medial side of the bronchioles, and between them. Finally, they enter the left atrium with four large veins, i.e. the common trunk of the right upper lobe vein and the right middle lobe vein, right lower lobe pulmonary venous trunk, left middle lobe vein, and left lower lobe pulmonary venous trunk.     

Altered artery mechanics and structure in monocrotaline pulmonary hypertension

Pulmonary hypertension in rats, induced by an injection of monocrotaline, is associated with changes in the wall structure of the pulmonary arterial bed. We have studied the effects of this remodeling on mechanical properties of cylindrical pulmonary artery segments from rats 21 days after monocrotaline (MCT) injection. Resting and active (KCl induced) circumference-tension relationships were established for segments of extrapulmonary and intrapulmonary arteries isolated from the hilum and the fifth lateral branch from the axial pathway (all preacinar). The thicknesses of the vessel wall, the media, and adventitia were measured at several positions around the circumference of the artery by computerized analysis of histological cross sections of the segments fixed at a standard circumference. Resting and active stress were also calculated. The study shows that active circumferential tension and active stress are reduced in vessels from MCT-treated rats. Based on our findings, it is unlikely that altered contractile function of preacinar arteries contributes significantly to the increased vascular resistance seen in this model.     

Linked mechanical and biological aspects of remodeling in mouse pulmonary arteries with hypoxia-induced hypertension

Supravalvular aortic stenosis (SVAS) is associated with decreased elastin and altered arterial mechanics. Mice with a single deletion in the elastin gene (ELN(+/-)) are models for SVAS. Previous studies have shown that elastin haploinsufficiency in these mice causes hypertension, decreased arterial compliance, and changes in arterial wall structure. Despite these differences, ELN(+/-) mice have a normal life span, suggesting that the arteries remodel and adapt to the decreased amount of elastin. To test this hypothesis, we performed in vitro mechanical tests on abdominal aorta, ascending aorta, and left common carotid artery from ELN(+/-) and wild-type (C57BL/6J) mice. We compared the circumferential and longitudinal stress-stretch relationships and residual strains. The circumferential stress-stretch relationship is similar between genotypes and changes <3% with longitudinal stretch at lengths within 10% of the in vivo value. At mean arterial pressure, the circumferential stress in the ascending aorta is higher in ELN(+/-) than in wild type. Although arterial pressures are higher, the increased number of elastic lamellae in ELN(+/-) arteries results in similar tension/lamellae compared with wild type. The longitudinal stress-stretch relationship is similar between genotypes for most arteries. Compared with wild type, the in vivo longitudinal stretch is lower in ELN(+/-) abdominal and carotid arteries and the circumferential residual strain is higher in ELN(+/-) ascending aorta. The increased circumferential residual strain brings the transmural strain distribution in ELN(+/-) ascending aorta close to wild-type values. The mechanical behavior of ELN(+/-) arteries is likely due to the reduced elastin content combined with adaptive remodeling during vascular development.     

Distribution of the pulmonary artery and vein in the lung of the white handed gibbon

The lungs of four white handed gibbons (Hylobates agilis) were examined. The right pulmonary artery runs across the ventral side of the right upper lobe bronchiole, and then traverses the dorsal side of the right middle lobe bronchiole. Thereafter, it runs along the dorso-lateral side of the right bronchus, between the dorsal bronchiole system and the lateral bronchiole system, and gradually follows the dorsal side of the right bronchus. During its course, it gives off arterial branches which run along each bronchiole. The left pulmonary artery runs across the dorsal side of the left middle lobe bronchiole and then along the left bronchus as in the right lung. The branches of the pulmonary artery run mainly along the dorsal or lateral side of the bronchiole, while the pulmonary veins run mainly the medial side of the bronchioles or between them. However, in a few portions, the pulmonary veins run the lateral side of the bronchioles. Finally, they enter the left atrium with four large veins i.e. the common trunk of the right upper lobe vein and right middle lobe vein, right lower lobe pulmonary venous trunk, left middle lobe vein, and left lower lobe pulmonary venous trunk.     

Abnormal development of cardiovascular systems in rat embryos treated with bisdiamine

Administration of N,N'-bis(dichloroacetyl)-1,8-octamethylenediamine, bisdiamine, in pregnant Donryu rats on day 10 of gestation induces a high incidence of cardiovascular anomalies in fetuses. Bisdiamine administration induced aplasia of the sixth aortic arch artery, with both the right and left primitive pulmonary arteries being directly linked to the truncus, and resulting in four types of malformation of pulmonary arteries (PAs). When two primitive PAs shared a single root, the consequence was either pulmonary trunk hypoplasia, as is seen in tetralogy of Fallot, or type I persistent truncus arteriosus (PTA) as classified by Collet and Edwards. When root portions of two PAs did not fuse, either type II or type III PTA resulted. In controls, the right dorsal aorta (DA) between the right seventh intersegmental artery (IA) and the site where both DAs fuse degenerated and the left aortic arch (AA) and the right subclavian artery (SA) were formed. Bisdiamine administration induced two additional types of vascular anomalies. In one of these, the right DA between the right 4AA and the right 7IA degenerated and a left AA accompanied by an aberrant right SA resulted. In the other type, the left DA between the left 4AA and the left 7IA degenerated and a right AA accompanied by an aberrant left SA resulted. These results indicate that administration of bisdiamine induces malformation in the great blood vessels by disturbing persistency and degeneration of aortic arch arteries and DAs.     

Features of the development of the arteries of the human liver and their practical significance

By means of roentgenography and preparation methods 145 specimens of the hepatic arteries filled with roentgenopaque latex have been studied. An essential individual changeability is peculiar for the celiac trunk structure and for formation of the hepatic arteries. A "typical" structure of the celiac trunk is observed in 66%. In other cases either "noncompleteness" of the celiac trunk, or increasing number of the branches up to 4-6 are observed. As a rule, the common hepatic artery gets of the celiac trunk (93%), but sometimes it can take its origin from the aorta, the superior mesenteric artery and some other sources (7%). The hepatic artery proper only in 73% divides into the right and left branches, in other observations the latter have their independent formation. It is necessary to distinguish the independent separation of the right and left lobar hepatic arteries from some sources and presence of additional arteries. The additional arteries are the branches that are formed from any arteries when there is present the hepatic artery proper, or substituting it independent right and left branches. The additional arteries appear from the left gastric, superior mesenteric, gastro-duodenal arteries, from the aorta, the right renal artery and other sources. The peculiarities of formation of the hepatic arteries discussed can be used in clinical practice and can make the terminology more precise.     

Quadricuspid pulmonary valve and left pulmonary artery aneurysm in an asymptomatic patient assessed by cardiovascular MRI

We present a coincidental finding of quadricuspid pulmonary valve and left pulmonary artery aneurysm. As both the pulmonary valve and the pulmonary trunk with its main branches are hard to visualise with cardiac ultrasound, most abnormalities described so far are from autopsy series. With the increasing use of CMR and its excellent potential for visualising both pulmonary valve and pulmonary arteries, we believe more cases will be discovered in the near future. Although pulmonary artery aneurysm are rare, timely detection may prevent lethal bleeding.     

Distribution of the pulmonary artery and vein of the orangutan lung

The distribution of the pulmonary artery and vein of the orangutan lung was examined. The right pulmonary artery runs obliquely across the ventral side of the right bronchus at the caudally to the right upper lobe bronchiole. It then runs across the dorsal side of the right middle lobe bronchiole. Thereafter it runs obliquely across the dorsal side of the right bronchus, and then along the dorso-medial side of the right bronchus. This course is different from that in other mammals. During its course, it gives off branches which run mainly along the dorsal or lateral side of each bronchiole. The left pulmonary artery runs across the dorsal side of the left middle lobe bronchiole, then along the dorso-lateral side of the left bronchus, giving off branches which run along each bronchiole. The pulmonary veins run mainly the ventral or medial side of, along or between the bronchioles. In the left lung, the left middle lobe vein has two trunks; one enters the left atrium, and the other enters the left lower lobe pulmonary venous trunk. This is also different from that found in most mammals. Finally, the pulmonary veins enter the left atrium with four large veins.     

A method for three-dimensional quantification of vascular smooth muscle orientation: application in viable murine carotid arteries

When studying in vivo arterial mechanical behaviour using constitutive models, smooth muscle cells (SMCs) should be considered, while they play an important role in regulating arterial vessel tone. Current constitutive models assume a strictly circumferential SMC orientation, without any dispersion. We hypothesised that SMC orientation would show considerable dispersion in three dimensions and that helical dispersion would be greater than transversal dispersion. To test these hypotheses, we developed a method to quantify the 3D orientation of arterial SMCs. Fluorescently labelled SMC nuclei of left and right carotid arteries of ten mice were imaged using two-photon laser scanning microscopy. Arteries were imaged at a range of luminal pressures. 3D image processing was used to identify individual nuclei and their orientations. SMCs showed to be arranged in two distinct layers. Orientations were quantified by fitting a Bingham distribution to the observed orientations. As hypothesised, orientation dispersion was much larger helically than transversally. With increasing luminal pressure, transversal dispersion decreased significantly, whereas helical dispersion remained unaltered. Additionally, SMC orientations showed a statistically significant (\(p < 0.05\)) mean right-handed helix angle in both left and right arteries and in both layers, which is a relevant finding from a developmental biology perspective. In conclusion, vascular SMC orientation (1) can be quantified in 3D; (2) shows considerable dispersion, predominantly in the helical direction; and (3) has a distinct right-handed helical component in both left and right carotid arteries. The obtained quantitative distribution data are instrumental for constitutive modelling of the artery wall and illustrate the merit of our method.     

Determination of layer-specific mechanical properties of human coronary arteries with nonatherosclerotic intimal thickening and related constitutive modeling

At autopsy, 13 nonstenotic human left anterior descending coronary arteries [71.5 +/- 7.3 (mean +/- SD) yr old] were harvested, and related anamnesis was documented. Preconditioned prepared strips (n = 78) of segments from the midregion of the left anterior descending coronary artery from the individual layers in axial and circumferential directions were subjected to cyclic quasi-static uniaxial tension tests, and ultimate tensile stresses and stretches were documented. The ratio of outer diameter to total wall thickness was 0.189 +/- 0.014; ratios of adventitia, media, and intima thickness to total wall thickness were 0.4 +/- 0.03, 0.36 +/- 0.03, and 0.27 +/- 0.02, respectively; axial in situ stretch of 1.044 +/- 0.06 decreased with age. Stress-stretch responses for the individual tissues showed pronounced mechanical heterogeneity. The intima is the stiffest layer over the whole deformation domain, whereas the media in the longitudinal direction is the softest. All specimens exhibited small hysteresis and anisotropic and strong nonlinear behavior in both loading directions. The media and intima showed similar ultimate tensile stresses, which are on average three times smaller than ultimate tensile stresses in the adventitia (1,430 +/- 604 kPa circumferential and 1,300 +/- 692 kPa longitudinal). The ultimate tensile stretches are similar for all tissue layers. A recently proposed constitutive model was extended and used to represent the deformation behavior for each tissue type over the entire loading range. The study showed the need to model nonstenotic human coronary arteries with nonatherosclerotic intimal thickening as a composite structure composed of three solid mechanically relevant layers with different mechanical properties. The intima showed significant thickness, load-bearing capacity, and mechanical strength compared with the media and adventitia.     

Use of pattern recognition to classify beef cardiovascular tissues on the basis of their trace metal compositions.

The pattern recognition procedure of discriminant analysis has been used to characterize the trace metal profiles created by the concentrations of 8 trace metals in 15 anatomic sites of beef heart tissue. Metals analyzed were copper, tin, lead, molybdenum, strontium, cesium, barium, and aluminum. Anatomic sites sampled included main pulmonary artery, aorta, mitral and tricuspid valves, left and right coronary arteries, os cordis, right atrium, left atrial appendage, crista supraventricularis, left bundle branch, free wall of the right and left ventricles, interventricular septum, and papillary muscle of the left ventricle. The striking features of the data were: (1) All specimens of the mitral valve, tricuspid valve, and os cordis were ambiguously described by their trace metal profiles; (2) the four blood vessels constituted two groups of two tissues each (aorta, main pulmonary artery; left and right coronary arteries); (3) tissues derived from ordinary and specialized myocardium were quite different from blood vessels, heart valves and os cordis. Using these profiles, 85% of the specimens analyzed were correctly classified by discriminant analysis with respect to their anatomic origin.     

In-vitro pulsatile flow visualization studies in a pulmonary artery model

In-vitro pulsatile flow visualization studies were conducted in an adult-sized pulmonary artery model to observe the effects of valvular pulmonic stenosis on the flow fields of the main, left and right pulmonary arteries. The flow patterns revealed that as the degree of stenosis increased, the jet-type flow created by the valve became narrower, and it impinged on the far (distal) wall of the left pulmonary artery further downstream from the junction of the bifurcation. This in turn led to larger regions of disturbed turbulent flow, as well as helical-type secondary flow motions in the left pulmonary artery, compared to the right pulmonary artery. The flow field in the main pulmonary artery also became more disturbed and turbulent, especially during peak systole and the deceleration phase. The flow visualization observations have been valuable in helping to conduct further quantitative studies such as pressure and velocity field mapping. Such studies are important to understanding the fluid mechanics characteristics of the main pulmonary artery and its two major branches.     

Analysis of the passive mechanical properties of rat carotid arteries

The passive mechanical properties of rat carotid arteries were studied in vitro. Using a tensile testing machine and a piston pump, intact segments of carotid arteries were subjected to large deformations both in the longitudinal and circumferential directions. Internal pressure, external diameter, length and longitudinal force were measured during the experiment and compared with the in vivo dimensions of the segments prior to excision. The anisotropic mechanical properties of the vessel wall material were analyzed using incremental elastic moduli and incremental Poisson's ratios. The results suggest that there is a characteristic deformation pattern common to all vessels investigated which is highly correlated with the conditions of loading that occur in vivo. That is, under average physiological deformation of the vessel, the longitudinal force is nearly independent of internal pressure. In this range of loading the circumferential incremental elastic modulus is nearly independent of longitudinal strain. However, the longitudinal and radial incremental elastic moduli vary significantly with deformation in this direction. The values of the moduli in all three directions increase with raising internal pressure. The weak coupling between circumferential and longitudinal direction in the wall material of carotid arteries is shown by the small value of the corresponding incremental Poisson's ratios.     

The bronchial tree and blood vessels of the Japanese monkey lung

The author injected various colored celluloid solutions into the bronchial tree and blood vessels of the lungs of five adult Japanese monkeys (Macaca fuscata) in order to prepare cast specimens. These specimens were investigated from the comparative anatomical viewpoint to determine whether the bronchial ramification theory of the mammalian lung (Nakakuki, 1975, 1980) can be applied to the Japanese monkey lung or not. The bronchioles are arranged stereotaxically like those of other mammalian lungs. The four bronchiole systems, dorsal, ventral, medial, and lateral, arise from both bronchi, respectively, although some bronchioles are lacking. In the right lung, the bronchioles form the upper, middle, accessory, and lower lobes, while in the left lung, the upper and accessory lobes are lacking and bi-lobed middle and lower lobes are formed. In the right lung, the upper lobe is formed by the first branch of the dorsal bronchiole system. The middle lobe is the first branch of the lateral bronchiole system. The accessory lobe is the first branch of the ventral bronchiole system. The lower lobe is formed by the remaining bronchioles of the four bronchiole systems. In the left lung, the middle lobe is formed by the first branch of the lateral bronchiole system. The lower lobe is formed by the remaining bronchioles. Thus, the bronchial ramification theory of the mammalian lung applied well to the Japanese monkey lung. The right pulmonary artery runs across the ventral side of the right upper lobe bronchiole. It then runs along the dorso-lateral side of the right bronchus between the dorsal bronchiole system and the lateral bronchiole system. On its way, it gives off branches of the pulmonary artery which run along the dorsal or lateral side of each bronchiole except in the ventral bronchiole system. In the ventral bronchiole system, the branches run along the ventral side of the bronchioles. The distributions of the pulmonary artery in the left lung are the same as those in the right lung. The pulmonary veins do not always run along the bronchioles. Most of them run on the medial or ventral side of the bronchioles. Some of them run between the pulmonary segments. In the right lung, these pulmonary veins finally form the right upper lobe vein, right middle lobe vein and the right lower lobe pulmonary venous trunk before entering the left atrium. However, the right accessory lobe vein runs on the dorsal side of the bronchiole and pours into the right lower lobe pulmonary venous trunk. In four cases out of the five examples, part of the right lower lobe veins pour into the right middle lobe vein, while the others enter the right lower lobe pulmonary venous trunk. In the left lung, the branches of the pulmonary veins finally form the left middle lobe vein and the left lower lobe pulmonary venous trunk.     

Pulmonary hypertension induced with an intra-arterial balloon: an alternate mechanism

The Laks catheter is a triple-lumen balloon catheter used to distend the canine main pulmonary artery while recording right ventricular pressure and the arterial pressure distal to the balloon. A rise in arterial pressure reported to occur during distension has been attributed to vasoconstriction rather than passive obstruction by the balloon. We tested this in six anesthetized dogs by inflating the Laks catheter-balloon while recording pressure distal to the balloon from the Laks catheter as well as from additional catheters in right and left pulmonary arteries placed retrogradely through lobar branches following thoracotomy. We found that balloon inflation increased pressures in the arterial port of the Laks catheter and in the left pulmonary artery catheter but reduced it in the right pulmonary artery. Tightening a snare around the right pulmonary artery had the same effects on pressures. Similar results were obtained while cardiac output was controlled by left ventricular bypass perfusion in four dogs. We conclude that the Laks catheter-balloon obstructs flow to the right lung and that the arterial pressure rise recorded in it during balloon inflation cannot be distinguished from that caused by occlusion of the right pulmonary artery.     

Experimental investigation of collagen waviness and orientation in the arterial adventitia using confocal laser scanning microscopy

Mechanical properties of the adventitia are largely determined by the organization of collagen fibers. Measurements on the waviness and orientation of collagen, particularly at the zero-stress state, are necessary to relate the structural organization of collagen to the mechanical response of the adventitia. Using the fluorescence collagen marker CNA38-OG488 and confocal laser scanning microscopy, we imaged collagen fibers in the adventitia of rabbit common carotid arteries ex vivo. The arteries were cut open along their longitudinal axes to get the zero-stress state. We used semi-manual and automatic techniques to measure parameters related to the waviness and orientation of fibers. Our results showed that the straightness parameter (defined as the ratio between the distances of endpoints of a fiber to its length) was distributed with a beta distribution (mean value 0.72, variance 0.028) and did not depend on the mean angle orientation of fibers. Local angular density distributions revealed four axially symmetric families of fibers with mean directions of 0°, 90°, 43° and ?43°, with respect to the axial direction of the artery, and corresponding circular standard deviations of 40°, 47°, 37° and 37°. The distribution of local orientations was shifted to the circumferential direction when measured in arteries at the zero-load state (intact), as compared to arteries at the zero-stress state (cut-open). Information on collagen fiber waviness and orientation, such as obtained in this study, could be used to develop structural models of the adventitia, providing better means for analyzing and understanding the mechanical properties of vascular wall.     

Regional contractile responses in pulmonary artery to alpha- and beta-adrenoceptor agonists

Contractile sensitivity and reactivity to alpha- and beta-adrenoceptor stimulation was studied in incubated rabbit pulmonary artery cylindrical segments of differing diameters. Distinct differences were noted between the responses of extra- and intra-pulmonary pulmonary arteries to norepinephrine and isoproterenol. The sensitivity to norepinephrine was largest in the intrapulmonary pulmonary arteries. Arterial reactivity to norepinephrine was greatest in the larger of the intrapulmonary vessel segments, diminishing considerably as the vessels became smaller. Cocaine did not cause substantial alterations in the response of any of the arterial segments to the alpha-agonist. Phentolamine, however, exerted its influence primarily in the smaller arterial segments. Vascular sensitivity to isoproterenol was least in the intrapulmonary pulmonary arteries. These smaller vessel segments, however, were more reactive to isoproterenol than were the extrapulmonary pulmonary arterial segments. Propranolol, at a concentration of 10(-8) M, was an effective antagonist of the beta-agonist; at a concentration of 10(-7) M, however, this antagonist was related to isoproterenol-induced arterial contraction, apparently by stimulation of alpha-receptor sites. The results of this study demonstrated a regional heterogeneity in the contractile response of the pulmonary artery to alpha- and beta-stimulation. The extrapulmonary arterial segments were found to be more sensitive to beta-stimulation than were the smaller, intrapulmonary, segments. The intrapulmonary arterial segments, on the other hand, were found to be more sensitive to alpha-stimulation than were the extrapulmonary segments.