Biofilm formation by <Emphasis Type="Italic">Candida albicans</Emphasis> isolated from intrauterine devices

Our survey revealed that infected intrauterine devices (IUDs) recovered from patients suffering from reproductive tract infections (RTIs) were tainted with Candida biofilm composed of a single or multiple species. Scanning electron microscopy (SEM) analysis of C. albicans biofilm topography showed that it consists of a dense network of mono- or multilayer of cells embedded within the matrix of extracellular polymeric substances (EPS). Confocal scanning laser microscopy (CSLM) and atomic force microscopy (AFM) images depicted that C. albicans biofilms have a highly heterogeneous architecture composed of cellular and noncellular elements with EPS distributed in the cell-surface periphery or at cell-cell interface. Biochemical analysis showed that EPS produced by C. albicans biofilm contained significantly reduced total carbohydrate (40%), protein (5%) and enhanced amount of hexosamine (4%) in contrast to its planktonic counterparts. The in vitro activity of antifungal agents amphotericin B, nystatin, fluconazole and chlorhexidine against pre-formed C. albicans biofilm, assessed using XTT (2,3-bis[2-methoxy-4-nitro-5-sulfophenyl]-2H-tetrazolium-5-carboxanilide) reduction assay revealed increased resistance of these infectious biofilm (50% reduction in metabolic activity at a concentration of 8, 16, 64, 128 μg/ml respectively) in comparison to its planktonic form.     

Characterization of Switch Phenotypes in <Emphasis Type="Italic">Candida albicans</Emphasis> Biofilms

The aim of this study was to characterize switch phenotypes in Candida albicans biofilms. Cells of Candida albicans 192887g biofilms (24 h) were resuspended and these together with their planktonic counterparts were separately inoculated on Lee’s medium agar supplemented with arginine and zinc, at 25 °C for 9 days, for colony formation. The different switch phenotypes, as reflected by varying colony morphologies, were then examined for their (i) stability under various growth conditions, (ii) carbohydrate assimilation profiles, (iii) susceptibility to the polyene antifungal, nystatin, (iv) adhering and biofilm-forming ability, (v) filamentation, and (vi) growth rate in yeast nitrogen base medium supplemented with 100 mM glucose. Our data showed that the frequency of phenotypic switching in C. albicans biofilms was approximately 1%. Compared with the planktonic yeasts, cells derived from candidal biofilms generated one of the phenotypes less frequently (Chi-square-tests: P = 0.017). The five phenotypes derived from the biofilm growth demonstrated differing profiles for carbohydrate assimilation, adhesion, biofilm formation, filamentation, and growth rate. These findings reported here, for the first time, imply that phenotypic switching in the candidal biofilms differs from that in the planktonic growth, and affects multiple biological attributes.     

Mechanisms of Bacillus cereus biofilm formation: an investigation of the physicochemical characteristics of cell surfaces and extracellular proteins

Microbial biofilms contribute to biofouling in a wide range of processes from medical implants to processed food. The extracellular polymeric substances (EPS) are implicated in imparting biofilms with structural stability and resistance to cleaning products. Still, very little is known about the structural role of the EPS in Gram-positive systems. Here, we have compared the cell surface and EPS of surface-attached (biofilm) and free-floating (planktonic) cells of Bacillus cereus, an organism routinely isolated from within biofilms on different surfaces. Our results indicate that the surface properties of cells change during biofilm formation and that the EPS proteins function as non-specific adhesions during biofilm formation. The physicochemical traits of the cell surface and the EPS proteins give us an insight into the forces that drive biofilm formation and maintenance in B. cereus.     

Persister cells in a biofilm treated with a biocide

This study investigated the physiology and behaviour following treatment with ortho-phthalaldehyde (OPA), of Pseudomonas fluorescens in both the planktonic and sessile states. Steady-state biofilms and planktonic cells were collected from a bioreactor and their extracellular polymeric substances (EPS) were extracted using a method that did not destroy the cells. Cell structure and physiology after EPS extraction were compared in terms of respiratory activity, morphology, cell protein and polysaccharide content, and expression of the outer membrane proteins (OMP). Significant differences were found between the physiological parameters analysed. Planktonic cells were more metabolically active, and contained greater amounts of proteins and polysaccharides than biofilm cells. Moreover, biofilm formation promoted the expression of distinct OMP. Additional experiments were performed with cells after EPS extraction in order to compare the susceptibility of planktonic and biofilm cells to OPA. Cells were completely inactivated after exposure to the biocide (minimum bactericidal concentration, MBC = 0.55 ± 0.20 mM for planktonic cells; MBC = 1.7 ± 0.30 mM for biofilm cells). After treatment, the potential of inactivated cells to recover from antimicrobial exposure was evaluated over time. Planktonic cells remained inactive over 48 h while cells from biofilms recovered 24 h after exposure to OPA, and the number of viable and culturable cells increased over time. The MBC of the recovered biofilm cells after a second exposure to OPA was 0.58 ± 0.40 mM, a concentration similar to the MBC of planktonic cells. This study demonstrates that persister cells may survive in biocide-treated biofilms, even in the absence of EPS.     

Extracellular polysaccharides from Desulfovibrio desulfuricans and Pseudomonas fluorescens in the presence of mild and stainless steel

Summary This communication reports the presence of polysaccharides in biofilms formed by pure and mixed cultures of Desulfovibrio desulfuricans and Pseudomonas fluorescens on mild and stainless steel surfaces. The results of colorimetric assays, indicating significant differences between the amounts of neutral sugars present in these biofilms, were supported by gas chromatographic (GC)-mass spectrophotometric and GC-flame ionisation detection analyses. Neutral sugars in biofilms grown on mild steel surfaces were identified and quantified, revealing glucose as a major carbohydrate followed by mannose and galactose in all types of biofilm. Extracellular polymeric substances (EPS) precipitated from bacterial cultures grown with and without steel surfaces were also analysed for their carbohydrate content. The influence of the surfaces present in the cultures on the amount and type of sugars released into the bulk phase was established. There was significantly more carbohydrate in EPS harvested from pure and mixed cultures of D. desulfuricans incubated mild and stainless steel coupons than in EPS obtained from coupon-free cultures. No significant difference in sugar quantities was observed in EPS precipitated from cultures of P. fluorescens grown under different conditions (absence or presence of steel surfaces). The main carbohydrates identified in all types of EPS samples were mannose, glucose and galactose in order of prevalence. Offprint requests to: I. B. Beech     

Characterization of the <Emphasis Type="Italic">codY</Emphasis> gene and its influence on biofilm formation in <Emphasis Type="Italic">Bacillus </Emphasis><Emphasis Type="Italic">cereus</Emphasis>

The foodborne pathogen Bacillus cereus can form biofilms on various food contact surfaces, leading to contamination of food products. To study the mechanisms of biofilm formation by B. cereus, a Tn5401 library was generated from strain UW101C. Eight thousand mutants were screened in EPS, a low nutrient medium. One mutant (M124), with a disruption in codY, developed fourfold less biofilm than the wild-type, and its defective biofilm phenotype was rescued by complementation. Addition of 0.1% casamino acids to EPS prolonged the duration of biofilms in the wild-type but not codY mutant. When decoyinine, a GTP synthesis inhibitor, was added to EPS, biofilm formation was decreased in the wild-type but not the mutant. The codY mutant produced three times higher protease activity than the wild-type. Zymogram and SDS-PAGE data showed that production of the protease (∼130 kDa) was repressed by CodY. Addition of proteinase K to EPS decreased biofilm formation by the wild-type. Using a dpp-lacZ fusion reporter system, it was shown that that the B. cereus CodY can sense amino acids and GTP levels. These data suggest that by responding to amino acids and intracellular GTP levels CodY represses production of an unknown protease and is involved in biofilm formation.     

Enhancement of Glutaraldehyde Biocidal Efficacy by the Application of an Electric Field. Effect on Sessile Cells and on Cells Released by the Biofilm

Summary The aim of this paper was to evaluate the possible enhancement of the biocidal efficacy of glutaraldehyde against Pseudomonas fluorescens biofilms by the application of an electric field. The behaviour of sessile cells and cells released by the biofilms was assed. Biofilms were formed on thin stainless steel coupons immersed in culture media inoculated with Pseudomonas fluorescens. Treatments using glutaraldehyde (TGA) and both glutaraldehyde and electric field application (TGAEF) were carried out with the samples with biofilms. TGA: samples with biofilms were immersed in glass cells containing a buffer solution with different glutaraldehyde concentrations in the 25–500 ppm range. TGAEF: samples with biofilms were immersed in an electrochemical cell containing glutaraldehyde solution where a direct electric current (4 × 10⁻⁴ A cm⁻²) was delivered to the chamber. The evolution of biofilms was observed through optical microscopy at real time. Results show that the electric field enhanced glutaraldehyde efficacy reducing the number of surviving cells in the range of one to four orders with respect to those with TGA treatment. The sensitivity of the cells to the treatments decreased in the following order: planktonic cells > cells released by the biofilm > sessile cells.     

Effects of Carbon Source, Carbon Concentration, and Chlorination on Growth Related Parameters of Heterotrophic Biofilm Bacteria

Abstract To investigate growth of heterotrophic biofilm bacteria, a model biofilm reactor was developed to simulate a drinking water distribution system. Controlled addition of three different carbon sources (amino acids, carbohydrates, and humics) at three different concentrations (500, 1,000, and 2,000 ppb carbon) in the presence and absence of chlorine were used in separate experiments. An additional experiment was run with a 1:1:2 mixture of the above carbon sources. Biofilm and effluent total and culturable cells in addition to total and dissolved organic carbon were measured in order to estimate specific growth rates (SGRs), observed yields, population densities, and bacterial carbon production rates. Bacterial carbon production rates (μg C/L day) were extremely high in the control biofilm communities (range = 295–1,738). Both growth rate and yield decreased with increasing carbon concentrations. Therefore, biofilm growth rates were zero-order with respect to the carbon concentrations used in these experiments. There was no correlation between growth rate and carbon concentration, but there was a significant negative correlation between growth rate and biofilm cell density (r=−0.637, p= 0.001 control and r=−0.57, p= 0.021 chlorinated biofilms). Growth efficiency was highest at the lowest carbon concentration (range = 12–4.5%, amino acids and humics respectively). Doubling times ranged from 2.3–15.4 days in the control biofilms and 1–12.3 days in the chlorinated biofilms. Growth rates were significantly higher in the presence of chlorine for the carbohydrates, humics, and mixed carbon sources (p= 0.004, < 0.0005, 0.013, respectively). The concept of r/K selection theory was used to explain the results with respect to specific growth rates and yields. Humic removal by the biofilm bacteria (78% and 56% for the control and chlorinated biofilms, respectively) was higher than previously reported literature values for planktonic bacteria. A number of control experiments indicated that filtration of drinking water was as effective as chlorination in controlling bacterial biofilm growth. Received: 26 March 1999; Accepted: 3 August 1999; Online Publication: 15 February 2000     

<Emphasis Type="Italic">Staphylococcus epidermidis</Emphasis> glucose uptake in biofilm versus planktonic cells

The aim of this work was to compare the glucose uptake of biofilms formed by four different Staphylococcus epidermidis strains as well as to compare between sessile and planktonic cells of the same strain. Biofilm cells showed a lower level of glucose uptake compared to planktonic cells. Moreover, glucose uptake by cells in the sessile form was strongly influenced by biofilm composition. Therefore, this work helps to confirm the phenotypic variability of S. epidermidis strains and the different behaviour patterns between sessile and free cells.     

Susceptibility of <Emphasis Type="Italic">Candida</Emphasis> biofilms to histatin 5 and fluconazole

Candida-associated denture stomatitis has a high rate of recurrence. Candida biofilms formed on denture acrylic are more resistant to antifungals than planktonic yeasts. Histatins, a family of basic peptides secreted by the major salivary glands in humans, especially histatin 5, possess significant antifungal properties. We examined antifungal activities of histatin 5 against planktonic or biofilm Candida albicans and Candida glabrata. Candida biofilms were developed on poly(methyl methacrylate) discs and treated with histatin 5 (0.01–100 μM) or fluconazole (1–200 μM). The metabolic activity of the biofilms was measured by the XTT reduction assay. The fungicidal activity of histatin 5 against planktonic Candida was tested by microdilution plate assay. Biofilm and planktonic C. albicans GDH18, UTR-14 and 6122/06 were highly susceptible to histatin 5, with 50% RMA (concentration of the agent causing 50% reduction in the metabolic activity; biofilm) of 4.6 ± 2.2, 6.9 ± 3.7 and 1.7 ± 1.5 μM, and IC₅₀ (planktonic cells) of 3.0 ± 0.5, 2.6 ± 0.1 and 4.8 ± 0.5, respectively. Biofilms of C. glabrata GDH1407 and 6115/06 were less susceptible to histatin 5, with 50% RMA of 31.2 ± 4.8 and 62.5 ± 0.7 μM, respectively. Planktonic C. glabrata was insensitive to histatin 5 (IC₅₀ > 100 μM). Biofilm-associated Candida was highly resistant to fluconazole in the range 1–200 μM; e.g. at 100 μM only ~20% inhibition was observed for C. albicans, and ~30% inhibition for C. glabrata. These results indicate that histatin 5 exhibits antifungal activity against biofilms of C. albicans and C. glabrata developed on denture acrylic. C. glabrata is significantly less sensitive to histatin 5 than C. albicans.     

Biofilm Formation by Cryptococcus neoformans Under Distinct Environmental Conditions

Cryptococcus neoformans is an opportunistic fungal pathogen with a propensity to infect the central nervous system of immune compromised individuals causing life-threatening meningoencephalitis. Cryptococcal biofilms have been described as a protective niche against microbial predators in nature and shown to enhance resistance against antifungal agents and specific mediators of host immune responses. Based on the potential importance of cryptococcal biofilms to its survival in the human host and in nature, these studies were designed to investigate those factors that mediate biofilm formation by C. neoformans. We observed that C. neoformans preferentially grew as planktonic cells when cultured under specific conditions designed to mimic growth within host tissues (37°C, neutral pH, and ~5% CO₂) or phagocytes (37°C, acidic pH, and ~5% CO₂) and as biofilms when cultured under conditions such as those encountered in the external environment (25–37°C, neutral pH, and ambient CO₂). Altogether, our studies suggest that conditions similar to those observed in its natural habitat may be conducive to biofilm formation by C. neoformans.     

Production and structural analysis of the polysaccharide secreted by <Emphasis Type="Italic">Trametes (Coriolus) versicolor</Emphasis> ATCC 200801

Trametes versicolor ATCC 200801 secretes 4.1 g L⁻¹ of exopolysaccharide (EPS) when synthetic minimal medium and low-shear bioreactor cultivation technique are used. Structural and compositional analyses by thin layer chromatography, gas chromatography–mass spectrometry, electrospray ionization tandem mass spectrometry, and nuclear magnetic resonance spectroscopy yielded predominantly glucose and small amounts of galactose, mannose, arabinose, and xylose. The main EPS is composed of β-1,3/β-1,6-linked d-glucose molecules which is identical with Schizophyllan but does not possess a triple helical arrangement as secondary structure. Two molar mass fractions were detected by size exclusion chromatography yielding weight-average molecular weights of 4,100 and 2.6 kDa. Protein content varies between 2–3.6% (w/w). The exopolysaccharide is different in the nature of the glycosidic linkage, composition of monosaccharides, protein content, and weight-average molecular weight compared to the well-known polysaccharopeptide (PSP) and polysaccharopeptide Krestin (PSK).     

Extracellular polymeric substances of the marine fouling diatom amphora rostrata Wm.Sm

Amphora rostrata was grown under continuous illumination at 27°C in batch cultures using f/2 medium. Cell biomass (measured as chllorophyll a and cell counts) reached a maximum on day 7. Thereafter, cell biomass as chl a showed a small decrease. Planktonic('free') and biofilm extracellular polymeric substances (EPS) from the adherent cells of A. rostrata were studied. Both types of EPS were produced during the logarithmic phase of growth. However, production was higher during the stationary growth phase. Enhanced EPS production was associated with nutrient deficient conditions. Planktonic and biofilm EPS were purified by gel filtration using Sephadex G‐200 and ion exchange chromatography using DEAE‐cellulose. Both polymers showed the presence of a single peak. Capillary gas Chromatographie analysis of both planktonic and biofilm EPS showed that fucose (36.7%) and galactose (27.6%) were the most abundant monosaccharides, with small quantities of rhamnose, xylose, arabinose, mannose and glucose. Other chemical analysis showed the presence of sulphate, uronic acids, hexoamines, pyruvate and proteins in both the planktonic and bio‐film EPS. Uronic acid, pyruvate and sulphate together were found to contribute ～50 to 60% (W/W) to the EPS of A. rostrata. Such a high content of non‐sugar components indicates their importance to the diatom in metal binding, desiccation prevention and flexibility.     

Assessment of Changes in Biodiversity when a Community of Ultramicrobacteria Isolated from Groundwater Is Stimulated to Form a Biofilm

With the continuing increase of ultraviolet-B radiation (UVBR: 280-320 nm) fluxes toward the Earth's surface, there is concern regarding a possible negative impact on heterotrophic bacterioplankton. The effects of enhanced UVBR on a natural bacterioplankton community were studied during a 7-day experiment conducted in mesocosms (1500 L). Four light regimes were tested: natural light, 280 to 313 nm excluded UVBR, and two levels of UVBR enhancement. During the first 3 days of the experiment characterized by high inorganic nutrient concentrations (nitrates > 1 μmol L-1 and ammonium > 0.1 μmol L-l), UVBR had no effect on both bacterial abundances and activities. From day 4 to the end of the experiment, nitrate concentrations remained low (<1 μmol L-1) and those of ammonium varied with a general tendency of decrease. During this period, bacterial abundances increased more rapidly in the UVBR enhanced treatments, reaching on the last day of the experiment values that were 39 to 73% higher than those observed in the natural UVBR treatment. 3H-Thymidine (TdR) incorporation rarely showed a significant inhibiting effect of UVBR. However, when expressed per bacterium, TdR incorporation decreased by approximately 40% with the UVBR enhancement above natural levels. Two explanations are possible. First, we know that UVBR reduced protozooplankton bacterivory, leading to an increase in the bacterial abundance. It may be that this increase in community abundance compensated for the UVBR inhibition of bacterial activity at the cellular level. Alternatively, community production may have been set by constant nutrient supply rates; UVBR "inhibition" was then a result of accumulating dead cells, a taxonomic shift, or increased competition among the more abundant cells.     

Persister cells in a biofilm treated with a biocide

This study investigated the physiology and behaviour following treatment with ortho-phthalaldehyde (OPA), of Pseudomonas fluorescens in both the planktonic and sessile states. Steady-state biofilms and planktonic cells were collected from a bioreactor and their extracellular polymeric substances (EPS) were extracted using a method that did not destroy the cells. Cell structure and physiology after EPS extraction were compared in terms of respiratory activity, morphology, cell protein and polysaccharide content, and expression of the outer membrane proteins (OMP). Significant differences were found between the physiological parameters analysed. Planktonic cells were more metabolically active, and contained greater amounts of proteins and polysaccharides than biofilm cells. Moreover, biofilm formation promoted the expression of distinct OMP. Additional experiments were performed with cells after EPS extraction in order to compare the susceptibility of planktonic and biofilm cells to OPA. Cells were completely inactivated after exposure to the biocide (minimum bactericidal concentration, MBC = 0.55 ± 0.20 mM for planktonic cells; MBC = 1.7 ± 0.30 mM for biofilm cells). After treatment, the potential of inactivated cells to recover from antimicrobial exposure was evaluated over time. Planktonic cells remained inactive over 48 h while cells from biofilms recovered 24 h after exposure to OPA, and the number of viable and culturable cells increased over time. The MBC of the recovered biofilm cells after a second exposure to OPA was 0.58 ± 0.40 mM, a concentration similar to the MBC of planktonic cells. This study demonstrates that persister cells may survive in biocide-treated biofilms, even in the absence of EPS.     

Effects of Contact Time, Pressure, Percent Relative Humidity (%RH), and Material Type on Listeria Biofilm Adhesive Strength at a Cellular Level Using Atomic Force Microscopy (AFM)

Whereas the transfer of Listeria from surfaces to foods and vice versa has been well documented, little is known about the mechanism of bacterial transfer. The objective of this work is to gain a better understanding of the forces involved in listerial biofilms adhesion using atomic force microscopy (AFM). L. monocytogenes Scott A was grown as biofilms on stainless steel surfaces by inoculating stainless steel coupons with Listeria and incubating the coupons for 48 h at 32 °C with a diluted 1:20 tryptic soy broth. After growth, biofilms were equilibrated over saturated salt solutions at a constant relative humidity (%RH) before measurement of adhesion forces using AFM. The effects of contact time, loading force, and biofilm relative humidity (%RH) suggested that neither contact time, loading force nor biofilm %RH had a significant effect on biofilm adhesiveness at a cellular level (P > 0.05). In a second set of experiments, the influence of material type on biofilm adhesiveness was evaluated using two different colloidal probes (SiO₂ and polyethylene). Results showed that the maximum pull-off force and retraction work needed to retract the cantilever for glass (−85.42 nN and 1.610⁻¹⁵ J, respectively) were significantly lower than those of polyethylene (−113.38 nN and 2.7 × 10^–15 J, respectively; P < 0.001). The results of this study suggest that Listeria biofilms adhere more strongly to hydrophobic surfaces than hydrophilic surfaces when measured at a cellular level. These results provide important insights that could lead to new ways to remediate and avoid listerial biofilm formation in the food industry.     

Characterization and anti-biofilm activity of extracellular polymeric substances produced by the marine biofilm-forming bacterium Pseudoalteromonas ulvae strain TC14

This study investigated soluble (Sol-EPS), loosely bound (LB-EPS), and tightly bound extracellular polymeric substances (TB-EPS) harvested from biofilm and planktonic cultures of the marine bacterium Pseudoalteromonas ulvae TC14. The aim of the characterization (colorimetric methods, FTIR, GC-MS, NMR, HPGPC, and AFM analyses) was to identify new anti-biofilm compounds; activity was assessed using the BioFilm Ring Test®. A step-wise separation of EPS was designed, based on differences in water-solubility and acidity. An acidic fraction was isolated from TB-EPS, which strongly inhibited biofilm formation by marine bacterial strains in a concentration-dependent manner. The main constituents of this fraction were characterized as two glucan-like polysaccharides. An active poly(glutamyl-glutamate) fraction was also recovered from TB-EPS. The distribution of these key EPS components in Sol-EPS, LB-EPS, and TB-EPS was distinct and differed quantitatively in biofilm vs planktonic cultures. The anti-biofilm potential of the fractions emphasizes the putative antifouling role of EPS in the environment.     

Susceptibility of staphylococcal biofilms to enzymatic treatments depends on their chemical composition

Bacterial infections are serious complications after orthopaedic implant surgery. Staphylococci, with Staphylococcus epidermidis as a leading species, are the prevalent and most important species involved in orthopaedic implant-related infections. The biofilm mode of growth of these bacteria on an implant surface protects the organisms from the host’s immune system and from antibiotic therapy. Therapeutic agents that disintegrate the biofilm matrix would release planktonic cells into the environment and therefore allow antibiotics to eliminate the bacteria. An addition of a biofilm-degrading agent to a solution used for washing–draining procedures of infected orthopaedic implants would greatly improve the efficiency of the procedure and thus help to avoid the removal of the implant. We have previously shown that the extracellular staphylococcal matrix consists of a poly-N-acetylglucosamine (PNAG), extracellular teichoic acids (TAs) and protein components. In this study, we accessed the sensitivity of pre-formed biofilms of five clinical staphylococcal strains associated with orthopaedic prosthesis infections and with known compositions of the biofilm matrix to periodate, Pectinex Ultra SP, proteinase K, trypsin, pancreatin and dispersin B, an enzyme with a PNAG-hydrolysing activity. We also tested the effect of these agents on the purified carbohydrate components of staphylococcal biofilms, PNAG and TA. We found that the enzymatic detachment of staphylococcal biofilms depends on the nature of their constituents and varies between the clinical isolates. We suggest that a treatment with dispersin B followed by a protease (proteinase K or trypsin) could be capable to eradicate biofilms of a variety of staphylococcal strains on inert surfaces.     

Structural organization and dynamics of exopolysaccharide matrix and microcolonies formation by Streptococcus mutans in biofilms

Aims: To investigate the structural organization and dynamics of exopolysaccharides (EPS) matrix and microcolonies formation by Streptococcus mutans during the biofilm development process. Methods and Results: Biofilms of Strep. mutans were formed on saliva‐coated hydroxyapatite (sHA) discs in the presence of glucose or sucrose (alone or mixed with starch). At specific time points, biofilms were subjected to confocal fluorescence imaging and computational analysis. EPS matrix was steadily formed on sHA surface in the presence of sucrose during the first 8 h followed by a threefold biomass increase between 8 and 30 h of biofilm development. The initial formation and further development of three‐dimensional microcolony structure occurred concomitantly with EPS matrix synthesis. Tridimensional renderings showed EPS closely associated with microcolonies throughout the biofilm development process forming four distinct domains (i) between sHA surface and microcolonies, (ii) within, (iii) covering and (iv) filling the spaces between microcolonies. The combination of starch and sucrose resulted in rapid formation of elevated amounts of EPS matrix and faster assembly of microcolonies by Strep. mutans, which altered their structural organization and susceptibility of the biofilm to acid killing (vs sucrose‐grown biofilms; P < 0·05). Conclusions: Our data indicate that EPS modulate the development, sequence of assembly and spatial distribution of microcolonies by Strep. mutans. Significance and Impact of the Study: Simultaneous visualization and analysis of EPS matrix and microcolonies provide a more precise examination of the structural organization of biofilms than labelling bacteria alone, which could be a useful approach to elucidate the exact mechanisms by which Strep. mutans influences oral biofilm formation and possibly identify novel targets for effective antibiofilm therapies.     

Characterisation and bioactivity of protein-bound polysaccharides from submerged-culture fermentation of Coriolus versicolor Wr-74 and ATCC-20545 strains

The protein-bound polysaccharides of Coriolus versicolor (CPS) have been reported to stimulate overall immune functions against cancers and various infectious diseases by activating specific cell functions. A New Zealand isolate (Wr-74) and a patented strain (ATCC-20545) of C. versicolor were compared in this study. The fruit bodies of both strains were grown for visual verification. Both strains were grown in submerged-culture using an airlift fermentor with milk permeate as the base medium supplemented with glucose, yeast extract and salt. Metabolic profiles of both strains obtained over 7-day fermentation showed very similar trends in terms of biomass production (8.9–10.6 mg/ml), amounts of extracellular polysaccharide (EPS) from the culture medium (1150–1132 μg/ml), and intracellular polysaccharide (IPS) from the mycelium (80–100 μg/ml). Glucose was the dominant sugar in both EPS and IPS, and the polymers each consisted of three molecular weight fractions ranging from 2 × 10⁶ to 3 × 10³ Da. Both the EPS and IPS were able to significantly induce cytokine production (interleukin 12 and γ interferon) in murine splenocytes in vitro. Highest levels of interleukin 12 (291 pg/ml) and γ interferon (6,159 pg/ml) were obtained from samples containing Wr-74 IPS (0.06 μg/ml) and ATCC 20545 IPS (0.1 μg/ml), respectively. The results indicated that lower levels of EPS and IPS generally resulted in higher immune responses than did higher polymer concentrations.