Catalysis of RNA cleavage by the Tetrahymena thermophila ribozyme. 2. Kinetic description of the reaction of an RNA substrate that forms a mismatch at the active site

The site-specific endonuclease reaction catalyzed by the ribozyme from the Tetrahymena pre-rRNA intervening sequence has been characterized with a substrate that forms a "matched" duplex with the 5' exon binding site of the ribozyme [G2CCCUCUA5 + G in equilibrium with G2CCCUCU + GA5 (G = guanosine); Herschlag, D., & Cech, T.R. (1990) Biochemistry (preceding paper in this issue)]. The rate-limiting step with saturating substrate is dissociation of the product G2CCCUCU. Here we show that the reaction of the substrate G2CCCGCUA5, which forms a "mismatched" duplex with the 5' exon binding site at position -3 from the cleavage site, has a value of kcat that is approximately 10(2)-fold greater than kcat for the matched substrate (50 degrees C, 10 mM MgCl2, pH 7). This is explained by the faster dissociation of the mismatched product, G2CCCGCU, than the matched product. With subsaturating oligonucleotide substrate and saturating G, the binding of the oligonucleotide substrate and the chemical step are each partially rate-limiting. The rate constant for the chemical step of the endonuclease reaction and the rate constant for the site-specific hydrolysis reaction, in which solvent replaces G, are each within approximately 2-fold with the matched and mismatched substrates, despite the approximately 10(3)-fold weaker binding of the mismatched substrate. This can be described as "uniform binding" of the base at position -3 in the ground state and transition state [Albery, W.J., & Knowles, J. R. (1976) Biochemistry 15, 5631-5640]. Thus, the matched substrate does not use its extra binding energy to preferentially stabilize the transition state.(ABSTRACT TRUNCATED AT 250 WORDS)     

Catalysis of RNA cleavage by the Tetrahymena thermophila ribozyme. 1. Kinetic description of the reaction of an RNA substrate complementary to the active site

A ribozyme derived from the intervening sequence (IVS) of the Tetrahymena preribosomal RNA catalyzes a site-specific endonuclease reaction: G2CCCUCUA5 + G in equilibrium with G2CCCUCU + GA5 (G = guanosine). This reaction is analogous to the first step in self-splicing of the pre-rRNA, with the product G2CCCUCU analogous to the 5'-exon. The following mechanistic conclusions have been derived from pre-steady-state and steady-state kinetic measurements at 50 degrees C and neutral pH in the presence of 10 mM Mg2+. The value of kcat/Km = 9 x 10(7) M-1 min-1 for the oligonucleotide substrate with saturating G represents rate-limiting binding. This rate constant for binding is of the order expected for formation of a RNA.RNA duplex between oligonucleotides. (Phylogenetic and mutational analyses have shown that this substrate is recognized by base pairing to a complementary sequence within the IVS). The value of kcat = 0.1 min-1 represents rate-limiting dissociation of the 5'-exon analogue, G2CCCUCU. The product GA5 dissociates first from the ribozyme because of this slow off-rate for G2CCCUCU. The similar binding of the product, G2CCCUCU, and the substrate, G2CCCUCUA5, to the 5'-exon binding site of the ribozyme, with Kd = 1-2 nM, shows that the pA5 portion of the substrate makes no net contribution to binding. Both the substrate and product bind approximately 10(4)-fold (6 kcal/mol) stronger than expected from base pairing with the 5'-exon binding site. Thus, tertiary interactions are involved in binding. Binding of G2CCCUCU and binding of G are independent. These and other data suggest that binding of the oligonucleotide substrate, G2CCCUCUA5, and binding of G are essentially random and independent. The rate constant for reaction of the ternary complex is calculated to be kc approximately equal to 350 min-1, a rate constant that is not reflected in the steady-state rate parameters with saturating G. The simplest interpretation is adopted, in which kc represents the rate of the chemical step. A site-specific endonuclease reaction catalyzed by the Tetrahymena ribozyme in the absence of G was observed; the rate of the chemical step with solvent replacing guanosine, kc(-G) = 0.7 min-1, is approximately 500-fold slower than that with saturating guanosine. The value of kcat/Km = 6 x 10(7) M-1 min-1 for this hydrolysis reaction is only slightly smaller than that with saturating guanosine, because the binding of the oligonucleotide substrate is predominantly rate-limiting in both cases.(ABSTRACT TRUNCATED AT 400 WORDS)     

Sequence-specific endoribonuclease activity of the Tetrahymena ribozyme: enhanced cleavage of certain oligonucleotide substrates that form mismatched ribozyme-substrate complexes

A shortened form of the self-splicing intervening sequence RNA of Tetrahymena acts as a sequence-specific endoribonuclease. Specificity of cleavage is determined by Watson-Crick base pairing between the active site of the RNA enzyme (ribozyme) and its RNA substrate [Zaug, A. J., Been, M. D., & Cech, T. R. (1986) Nature (London) 324, 429-433]. Surprisingly, single-base changes in the substrate RNA 3 nucleotides preceding the cleavage site, giving a mismatched substrate-ribozyme complex, enhance the rate of cleavage. Mismatched substrates show up to a 100-fold increase in kcat and, in some cases, in kcat/Km. A mismatch introduced by changing a nucleotide in the active site of the ribozyme has a similar effect. Addition of 2.5 M urea or 3.8 M formamide or decreasing the divalent metal ion concentration from 10 to 2 mM reverses the substrate specificity, allowing the ribozyme to discriminate against the mismatched substrate. The effect of urea is to decrease kcat and kcat/Km for cleavage of the mismatched substrate; Km is not significantly affected at 0-2.5 M urea. Thus, progressive destabilization of ribozyme-substrate pairing by mismatches or by addition of a denaturant such as urea first increases the rate of cleavage to an optimum value and then decreases the rate.     

The tetrahymena ribozyme cleaves a 5'-methylene phosphonate monoester approximately 10(2)-fold faster than a normal phosphate diester: implications for enzyme catalysis of phosphoryl transfer reactions

Single-atom substrate modifications have revealed an intricate network of transition state interactions in the Tetrahymena ribozyme reaction. So far, these studies have targeted virtually every oxygen atom near the reaction center, except one, the 5'-bridging oxygen atom of the scissile phosphate. To address whether interactions with this atom play any role in catalysis, we used a new type of DNA substrate in which the 5'-oxygen is replaced with a methylene (-CH2-) unit. Under (kcat/Km)S conditions, the methylene phosphonate monoester substrate dCCCUCUT(mp)TA4 (where mp indicates the position of the phosphonate linkage) unexpectedly reacts approximately 10(3)-fold faster than the analogous control substrates lacking the -CH2- modification. Experiments with DNA-RNA chimeric substrates reveal that the -CH2- modification enhances docking of the substrates into the catalytic core of the ribozyme by approximately 10-fold and stimulates the chemical cleavage by approximately 10(2)-fold. The docking effect apparently arises from the ability of the -CH2- unit to suppress inherently deleterious effects caused by the thymidine residue that immediately follows the cleavage site. To analyze the -O- to -CH2- modification in the absence of this thymidine residue, we prepared oligonucleotide substrates containing methyl phosphate or ethyl phosphonate at the reaction center, thereby eliminating the 3'-terminal TA4 nucleotidyl group. In this context, the -O- to -CH2-modification has no effect on docking but retains the approximately 10(2)-fold effect on the chemical step. To investigate further the stimulatory influence on the chemical step, we measured the "intrinsic" effect of the -O- to -CH2- modification in nonenzymatic reactions with nucleophiles. We found that in solution, the -CH2- modification stimulates chemical reactivity of the phosphorus center by <5-fold, substantially lower in magnitude than the stimulatory effect in the catalytic core of the ribozyme. The greater stimulatory effect of the -CH2- modification in the active site compared to in solution may arise from fortuitous changes in molecular geometry that allow the ribozyme to accommodate the phosphonate transition state better than the natural phosphodiester transition state. As the -CH2- unit lacks lone pair electrons, its effectiveness in the ribozyme reaction suggests that the 5'-oxygen of the scissile phosphate plays no role in catalysis via hydrogen bonding or metal ion coordination. Finally, we show by analysis of physical organic data that such interactions in general provide little catalytic advantage to RNA and protein phosphoryl transferases because the 5'-oxygen undergoes only a small buildup of negative charge during the reaction. In addition to its mechanistic significance for the Tetrahymena ribozyme reaction and phosphoryl transfer reactions in general, this work suggests that phosphonate monoesters may provide a novel molecular tool for determining whether the chemical step limits the rate of an enzymatic reaction. As methylene phosphonate monoesters react modestly faster than phosphate diesters in model reactions, a similarly modest stimulatory effect on an enzymatic reaction upon -CH2- substitution would suggest rate-limiting chemistry.     

Kinetic parameters for the elimination reaction catalyzed by triosephosphate isomerase and an estimation of the reaction's physiological significance

Kinetic parameters for triosephosphate isomerase catalysis of the elimination reaction of an equilibrium mixture of dihydroxyacetone phosphate (DHAP) and D-glyceraldehyde-3-phosphate (DGAP) to form methylglyoxal and phosphate ion are reported for the enzyme from rabbit muscle. Pseudo-first-order rate constants for the disappearance of substrate (kelim) were determined for reactions at [Enzyme] much greater than [Substrate]. The second-order rate constant kEnz = 10.1 M-1 s-1 was determined from a plot of kelim against enzyme concentration. The kinetic parameters, determined from a steady-state kinetic analysis at [Substrate] much greater than [Enzyme], are kcat = 0.011 s-1, Km = 0.76 mM, and kcat/Km = 14 M-1 s-1. The estimated rate-constant ratio for partitioning of the enzyme-bound intermediate between protonation at carbon 2 and elimination, 1,000,000, is much larger than the ratio of 6.5 determined for the reaction of the enediolate phosphate in a loose complex with quinuclidinonium cation, a small buffer catalyst. There is a 10(5)-10(8)-fold decrease in the rate constant for the elimination reaction of the enediolate phosphate when this species binds to triosephosphate isomerase. The kinetic parameters for the elimination reaction catalyzed by the native triosephosphate isomerase and for the reaction catalyzed by a mutant form of the enzyme, which is missing a segment that forms hydrogen bonds with the phosphate group of substrate [Pompliano, D. L., Peyman, A., & Knowles, J. R. (1990) Biochemistry 29, 3186-3194] are similar.(ABSTRACT TRUNCATED AT 250 WORDS)     

Mutational analysis of carbamyl phosphate synthetase. Substitution of Glu841 leads to loss of functional coupling between the two catalytic domains of the synthetase subunit.

The synthetase subunit of Escherichia coli carbamyl phosphate synthetase has two catalytic nucleotide-binding domains, one involved in the activation of HCO3- and the second in phosphorylation of carbamate. Here we show that a Glu841----Lys841 substitution in a putative ATP-binding domain located in the carboxyl half of the synthetase abolishes overall synthesis of carbamyl phosphate with either glutamine or NH3 as the nitrogen source. Measurements of partial activities indicate that while HCO3(-)-dependent ATP hydrolysis at saturating concentrations of substrate proceeds at higher than normal rates, ATP synthesis from ADP and carbamyl phosphate is nearly completely suppressed by the mutation. These results indicate Glu841 to be an essential residue for the phosphorylation of carbamate in the terminal step of the catalytic mechanism. The Lys841 substitution also affects the kinetic properties of the HCO3- activation site. Both kcat and Km for ATP increase 10-fold, while Km for HCO3- is increased 100-fold. Significantly, NH3 decreases rather than stimulates Pi release from ATP in the HCO3(-)-dependent ATPase reaction. The increase in kcat of the HCO3(-)-dependent ATPase reaction, and an impaired ability of the Lys841 enzyme to catalyze the reaction of NH3 with carboxy phosphate, strongly argues for interactions between the two catalytic ATP sites that couple the formation of enzyme-bound carbamate with its phosphorylation.     

Leaving group dependence in the phosphorylation of Escherichia coli alkaline phosphatase by monophosphate esters

Values of kcat and Km have been measured for the Escherichia coli alkaline phosphatase catalyzed hydrolysis of 18 aryl and 12 alkyl monophosphate esters at pH 8.00 and 25 degrees C. A Br?nsted plot of log (kcat/Km) (M-1 s-1) vs. the pK of the leaving hydroxyl group exhibits two regression lines: log (kcat/Km) = -0.19 (+/- 0.02) pKArOH + 8.14 (+/- 0.15) log (kcat/Km) = -0.19 (+/- 0.01) pKROH + 5.89 (+/- 0.17) Alkyl phosphates with aryl or large lipophilic side chains are not correlated by the above equations and occupy positions intermediate between the two lines. The observed change in effective charge on the leaving oxygen of the ester (-0.2) is very small, consistent with substantial electrophilic participation of the enzyme with this atom. Cyclohexylammonium ion is a noncompetitive inhibitor against 4-nitrophenyl phosphate substrate at pH 8.00, and neutral phenol is a competitive inhibitor (Ki = 82.6 mM); these data and the 100-fold larger reactivity of aryl over alkyl esters are consistent with the existence of a lipophilic binding site for the leaving group of the substrate. The absence of a major steric effect in kcat/Km for substituted aryl esters confirms that the leaving group in the enzyme--substrate complex points away from the surface of the enzyme. Arguments are advanced to exclude a dissociative mechanism (involving a metaphosphate ion) for the enzyme-catalyzed substitution at phosphorus.     

Probing the role of metal ions in RNA catalysis: kinetic and thermodynamic characterization of a metal ion interaction with the 2'-moiety of the guanosine nucleophile in the Tetrahymena group I ribozyme.

Deciphering the role of individual metal ions in RNA catalysis is a tremendous challenge, as numerous metal ions coat the charged backbone of a folded RNA. Metal ion specificity switch experiments combined with quantitative analysis may provide a powerful tool for probing specific metal ion-RNA interactions and for delineating the role of individual metal ions among the sea of metal ions bound to RNA. We show herein that Mn(2+) rescues the deleterious effect of replacing the 2'-OH of the guanosine nucleophile (G) by -NH(2) (G(NH)()2) in the reaction catalyzed by the Tetrahymena group I ribozyme (E), and the Mn(2+) concentration dependence suggests that a single metal ion is responsible for rescue. This provides strong evidence for a metal ion interaction with the 2'-moiety of G in this ribozyme (referred to as M(C)), confirming and extending previous results in a bacteriophage group I intron [Sj?gren, A.-S., Pettersson, E., Sj?berg, B.-M., and Str?mberg, R. (1997) Nucleic Acids Res. 25, 648-654]. Toward understanding the >10(6)-fold catalytic contribution of the 2'-OH of G, we have determined the individual reaction steps affected by M(C) and quantitated these effects. has only a small effect on binding of G(NH)()2 to the free ribozyme or ribozyme.oligonucleotide complexes that lack the reactive phosphoryl group. In contrast, increases the binding of G(NH)()2 to the ribozyme.oligonucleotide substrate (E.S) complex 20-fold and increases the binding of S to the E.G(NH)()2 complex by the same amount. These and other observations suggest that M(C) plays an integral role in the coupled binding of the oligonucleotide substrate and the guanosine nucleophile. This metal ion may be used to align the nucleophile within the active site, thereby facilitating the reaction. Alternatively or in addition, M(C) may act in concert with an additional metal ion to coordinate and activate the 3'-OH of G. Finally, these experiments have also allowed us to probe the properties of this metal ion site and isolate the energetic effects of the interaction of this specific metal ion with the 2'-moiety of G.     

A new metal ion interaction in the Tetrahymena ribozyme reaction revealed by double sulfur substitution

The Tetrahymena ribozyme is a metalloenzyme that catalyzes cleavage of oligonucleotide substrates by phosphoryl transfer. Thiophilic metal ions such as Mn2+, Zn2+ or Cd2+ rescue the >10(3)-fold inhibitory effect of sulfur substitution of the 3'-oxygen leaving group but do not effectively rescue the effect of sulfur substitution of the nonbridging pro-Sp phosphoryl oxygen. We now show that the latter effect can be fully rescued by Zn2+ or Cd2+ using a phosphorodithioate substrate, in which both the 3'-oxygen and the pro-Sp oxygen are simultaneously substituted with sulfur. These results provide the first functional evidence that metallophosphotransferases can mediate catalysis via metal ion coordination to both the leaving group and a nonbridging oxygen of the scissile phosphate.     

Identification of an active site ligand for a group I ribozyme catalytic metal ion

The transition state of the group I intron self-splicing reaction is stabilized by three metal ions. The functional groups within the intron substrates (guanosine and an oligoribonucleotide mimic of the 5'-exon) that coordinate these metal ions have been systematically defined through a series of metal ion specificity switch experiments. In contrast, the catalytic metal ligands within the ribozyme active site are unknown. In an effort to identify them, stereospecific (R(P) or S(P)) single-site phosphorothioate substitutions were introduced at five phosphates predicted to be in the vicinity of the catalytic center (A207, C208, A304, U305, and A306) within the Tetrahymena intron. Of the 10 ribozymes that were studied, four phosphorothioate substitutions (A207 S(P), C208 S(P), A306 R(P), and A306 S(P)) exhibited a significant reduction in the cleavage rate. Only the effect of the C208 S(P) phosphorothioate substitution could be significantly rescued by the addition of a thiophilic metal ion, either Mn(2+) or Zn(2+), when tested with an all-oxy substrate. The effect was not rescued with Cd(2+). To determine if one of the catalytic metal ions is coordinated to the C208 pro-S(P) oxygen, the phosphorothioate-substituted ribozymes were also assayed using oligonucleotide substrates with a 3'-phosphorothiolate or an S(P) phosphorothioate substitution at the scissile phosphate. This resulted in a second metal specificity switch, in that Mn(2+) or Zn(2+) no longer rescued the C208 S(P) ribozyme, but Cd(2+) provided efficient rescue in the context of either sulfur-containing substrate. The 3'-oxygen and the pro-S(P) oxygen of the scissile phosphate are both known to coordinate the same metal ion, M(A), which stabilizes the negative charge on the leaving group 3'-oxygen in the transition state. Taken together, these data suggest that metal M(A) is coordinated to the C208 pro-S(P) phosphate oxygen, which constitutes the first functional link between a specific catalytic metal ion and a particular functional group within the group I ribozyme active site.     

Barnase has subsites that give rise to large rate enhancements.

Barnase is found to have a series of subsites for binding its substrates that confers large rate enhancements. Ribonucleotide substrates of the type Zp0Gp1Xp2Y have been synthesized, where p is phosphate, X, Y, and Z are nucleosides, and G is guanosine. G occupies the primary specificity site. The most important subsite is for p2, followed by that for Y. There appears to be no subsite for the Z or p0 positions. Occupation of the subsite for p2 gives rise to a 1000-fold increase in kcat/Km, composed of a 100-fold increase in kcat and a 10-fold decrease in Km. The Y subsite gives rise to further 20-fold increase in kcat/Km. Rates approaching diffusion control for kcat/Km are observed. kcat for the dinucleotide monophosphate GpU = 0.55 s-1, and Km = 240 microM; this compares with 53 s-1 and 20 microM for GpUp, and 3.3 x 10(3) s-1 and 17 microM for GpApA (the best substrate tested). Cleavage occurs at the 3'-phosphate of guanosine in all cases. There are differences in base specificity at the two subsites for X and Y downstream of the scissile bond. The binding energies of different substrates have been analyzed using thermodynamic cycles. These show that the contributions of the X and Y sites are nonadditive.     

Substrate specificity of human class I alcohol dehydrogenase homo- and heterodimers containing the beta 2 (Oriental) subunit

In order to gain a better understanding of the metabolism of ethanol in Orientals, the kinetic properties of human alcohol dehydrogenase (ADH) isozymes containing the beta 2 (Oriental) subunit, i.e., alpha beta 2, beta 2 gamma 1, beta 2 beta 2, beta 2 gamma 2, as well as gamma 1 gamma 1, were examined by using primary and secondary alcohol substrates of various chain lengths and compared with those of the corresponding beta 1 (Caucasian) subunit containing isozymes already on record [Wagner, F. W., Burger, A. R., & Vallee, B. L. (1983) Biochemistry 22, 1857-1863]. With primary alcohols, these isozymes follow typical Michaelis-Menten kinetics with a preference for long-chain alcohols, as indicated by Km and kcat/Km values. The kcat values obtained with primary alcohols, except methanol, do not vary greatly, i.e., less than 3-fold, whereas the corresponding Km values span a 3600-fold range, i.e., from 26 microM to 94 mM, indicating that the specificity of these isozymes manifests principally in substrate binding. As a consequence, ethanol--which might be thought to be the principal in vivo substrate for ADH--is oxidized rather poorly, i.e., from 50- to 90-fold less effectively than octanol. Secondary alcohol oxidation by the homodimers beta 2 beta 2 and gamma 1 gamma 1 also follows normal Michaelis-Menten kinetics. Again, values of Km and kcat/Km reveal that both isozymes prefer long carbon chains. For all secondary alcohols studied, the Km and kcat values for beta 2 beta 2 are much higher than those for gamma 1 gamma 1, i.e., 25- to 360-fold and 6- to 16-fold, respectively.(ABSTRACT TRUNCATED AT 250 WORDS)     

Structure-function studies of substrate oxidation by bovine serum amine oxidase: relationship to cofactor structure and mechanism.

The chemical mechanism of substrate oxidation, catalyzed by bovine serum amine oxidase, has been explored by a detailed investigation of structure-reactivity correlations. Past mechanistic studies, involving the reductive trapping of substrate to cofactor [Hartmann, C., & Klinman, J. P. (1987) J. Biol. Chem. 262, 962], implied the intermediacy of a substrate imine complex in the catalytic redox mechanism. These studies led to the proposal of a transamination mechanism for substrate oxidation, analogous to pyridoxal phosphate dependent enzymes. In pyridoxal phosphate catalyzed reactions, the transamination process involves the transient formation of a resonance-stabilized carbanion intermediate. Although evidence has been presented describing the participation of an active site base in bovine serum amine oxidase catalysis [Farnum, M. F., Palcic, M. M., & Klinman, J. P. (1986) Biochemistry 25, 1898], the nature of the intermediate derived from C-H bond cleavage has not been directly addressed. To examine this question, a structure-reactivity study was performed using a series of para-substituted benzylamines. Having prior knowledge of the intrinsic isotope effect for an enzymatic reaction permits calculation of microscopic rate constants from steady-state data [Palcic, M. M., & Klinman, J. P. (1983) Biochemistry 22, 5957]. Deuterium isotope effects on kcat and kcat/Km parameters were determined for all substrates, allowing for the calculation of rate constants for C-H bond cleavage (k3) and substrate dissociation constants (Kd). Pre-steady-state constants obtained for p-acetylbenzylamine, p-(trifluoromethyl)benzylamine, and unsubstituted benzylamine exhibited excellent agreement with values calculated from steady-state isotope effects.(ABSTRACT TRUNCATED AT 250 WORDS)     

Impaired transition state complementarity in the hydrolysis of O-arylphosphorothioates by protein-tyrosine phosphatases.

The hydrolysis of O-arylphosphorothioates by protein-tyrosine phosphatases (PTPases) was studied with the aim of providing a mechanistic framework for the reactions of this important class of substrate analogues. O-arylphosphorothioates are hydrolyzed 2 to 3 orders of magnitude slower than O-aryl phosphates by PTPases. This is in contrast to the solution reaction where phosphorothioates display 10-60-fold higher reactivity than the corresponding oxygen analogues. Kinetic analyses suggest that PTPases utilize the same active site and similar kinetic and chemical mechanisms for the hydrolysis of O-arylphosphorothioates and O-aryl phosphates. Thio substitution has no effect on the affinity of substrate or product for the PTPases. Bronsted analyses suggest that like the PTPase-catalyzed phosphoryl transfer reaction the transition state for the PTPase-catalyzed thiophosphoryl transfer is highly dissociative, similar to that of the corresponding solution reaction. The side chain of the active-site Arg residue forms a bidentate hydrogen bond with two of the terminal phosphate oxygens in the ground state and two of the equatorial oxygens in a transition state analog complex with vanadate [Denu et al. (1996) Proc. Natl. Acad. Sci. USA 93, 2493-2498; Zhang, M. et al. (1997) Biochemistry 36, 15-23; Pannifer et al. (1998) J. Biol. Chem. 273, 10454-10462]. Replacement of the active-site Arg409 in the Yersinia PTPase by a Lys reduces the thio effect by 54-fold, consistent with direct interaction and demonstrating strong energetic coupling between Arg409 and the phosphoryl oxygens in the transition state. These results suggest that the large thio effect observed in the PTPase reaction is the result of inability to achieve precise transition state complementarity in the enzyme active site with the larger sulfur substitution.     

Modified activity of Aeromonas aminopeptidase: metal ion substitutions and role of substrates

Aeromonas aminopeptidase contains two nonidentical metal binding sites that have been shown by both spectroscopy and kinetics to be capable of interacting with one another [Prescott, J.M., Wagner, F.W., Holmquist, B., & Vallee, B.L. (1985) Biochemistry 24, 5350-5356]. The effects of metal ion substitutions on the susceptibility of the p-nitroanilides of L-alanine, L-valine, and L-leucine--substrates that are hydrolyzed at widely differing rates by native Aeromonas aminopeptidase--were studied by determining values of kcat and Km for the 16 metalloenzymes that result from all possible combinations of Zn2+, Co2+, Ni2+, and Cu2+ in each of the two sites. The different combinations of metal ions and substrates yield a broad range in kinetic values; kcat varies by more than 1800-fold, Km by 3000-fold, and kcat/Km ratios by more than 10,000. L-Leucine-p-nitroanilide is by far the most susceptible of the three substrates, and the hyperactivation previously observed with aminopeptidase containing either Ni2+ or Cu2+ in the first binding site and Zn2+ in the second site occurs only with the two poorer substrates, L-alanine-p-nitroanilide and L-valine-p-nitroanilide. Although the enzyme with Zn2+ in both sites hydrolyzes the substrates with N-terminal alanine and valine poorly, it is extremely effective toward L-leucine-p-nitroanilide. Neither metal binding site can be identified as controlling either Km or kcat; both parameters are influenced by the identity of the metal ions, by the site each occupies, and, most strongly, by the substrate.(ABSTRACT TRUNCATED AT 250 WORDS)     

Function of arginine-166 in the active site of Escherichia coli alkaline phosphatase

The function of arginine residue 166 in the active site of Escherichia coli alkaline phosphatase was investigated by site-directed mutagenesis. Two mutant versions of alkaline phosphatase, with either serine or alanine in the place of arginine at position 166, were generated by using a specially constructed M13 phage carrying the wild-type phoA gene. The mutant enzymes with serine and alanine at position 166 have very similar kinetic properties. Under conditions of no external phosphate acceptor, the kcat for the mutant enzymes decreases by approximately 30-fold while the Km increases by less than 2-fold. When kinetic measurements are carried out in the presence of a phosphate acceptor, 1.0 M Tris, the kcat for the mutant enzymes is reduced by less than 3-fold, while the Km increases by more than 50-fold. For both mutant enzymes, in either the absence or the presence of a phosphate acceptor, the catalytic efficiency as measured by the kcat/Km ratio decreases by approximately 50-fold as compared to the wild type. Measurements of the Ki for inorganic phosphate show an increase of approximately 50-fold for both mutants. Phenylglyoxal, which inactivates the wild-type enzyme, does not inactivate the Arg-166----Ala enzyme. This result indicates that Arg-166 is the same arginine residue that when chemically modified causes loss of activity [Daemen, F.J.M., & Riordan, J.F. (1974) Biochemistry 13, 2865-2871]. The data reported here suggest that although Arg-166 is important for activity is not essential. The analysis of the kinetic data also suggests that the loss of arginine-166 at the active site of alkaline phosphatase has two different effects on the enzyme. First, the binding of the substrate, and phosphate as a competitive inhibitor, is reduced; second, the rate of hydrolysis of the covalent phosphoenzyme may be diminished.     

The P5abc peripheral element facilitates preorganization of the tetrahymena group I ribozyme for catalysis

Phylogenetic comparisons and site-directed mutagenesis indicate that group I introns are composed of a catalytic core that is universally conserved and peripheral elements that are conserved only within intron subclasses. Despite this low overall conservation, peripheral elements are essential for efficient splicing of their parent introns. We have undertaken an in-depth structure-function analysis to investigate the role of one of these elements, P5abc, using the well-characterized ribozyme derived from the Tetrahymena group I intron. Structural comparisons using solution-based free radical cleavage revealed that a ribozyme lacking P5abc (E(DeltaP5abc)) and E(DeltaP5abc) with P5abc added in trans (E(DeltaP5abc).P5abc) adopt a similar global tertiary structure at Mg(2+) concentrations greater than 20 mM [Doherty, E. A., et al. (1999) Biochemistry 38, 2982-90]. However, free E(DeltaP5abc) is greatly compromised in overall oligonucleotide cleavage activity, even at Mg(2+) concentrations as high as 100 mM. Further characterization of E(DeltaP5abc) via DMS modification revealed local structural differences at several positions in the conserved core that cluster around the substrate binding sites. Kinetic and thermodynamic dissection of individual reaction steps identified defects in binding of both substrates to E(DeltaP5abc), with > or =25-fold weaker binding of a guanosine nucleophile and > or =350-fold weaker docking of the oligonucleotide substrate into its tertiary interactions with the ribozyme core. These defects in binding of the substrates account for essentially all of the 10(4)-fold decrease in overall activity of the deletion mutant. Together, the structural and functional observations suggest that the P5abc peripheral element not only provides stability but also positions active site residues through indirect interactions, thereby preferentially stabilizing the active ribozyme structure relative to alternative less active states. This is consistent with the view that peripheral elements engage in a network of mutually reinforcing interactions that together ensure cooperative folding of the ribozyme to its active structure.     

Evidence for processivity and two-step binding of the RNA substrate from studies of J1/2 mutants of the Tetrahymena ribozyme.

J1/2 of the Tetrahymena ribozyme, a sequence of three A residues, connects the RNA-binding site to the catalytic core. Addition or deletion of bases from J1/2 improves turnover and substrate specificity in the site-specific endonuclease reaction catalyzed by this ribozyme: G2CCCUCUA5 (S) + G in-equilibrium G2CCCUCU (P) + GA5. These paradoxical enhancements are caused by decreased affinity of the ribozyme for S and P [Young, B., Herschlag, D., & Cech, T.R. (1991) Cell 67, 1007]. An additional property of these mutant ribozymes, decreased fidelity of RNA cleavage, is now analyzed. (Fidelity is the ability to cleave at the correct phosphodiester bond within a particular RNA substrate.) Introduction of deoxy residues to give "chimeric" ribo/deoxyribooligonucleotides changes the positions of incorrect cleavage. Previous work indicated that S is bound to the ribozyme by both base pairing and teritary interactions involving 2'-hydroxyl groups of S. The data herein strongly suggest that the P1 duplex, which consists of S base-paired with the 5' exon binding site of the ribozyme, can dock into tertiary interactions in different registers; different 2'-hydroxyl groups of S plug into tertiary contacts with the ribozyme in the different registers. It is concluded that the mutations decrease fidelity by increasing the probability of docking out of register relative to docking in the normal register, thereby giving cleavage at different positions along S. These data also show that the contribution of J1/2 to the teritiary interactions is indirect, not direct. Thus, a structural role of the nonconserved J1/2 is indicated: this sequence positions S to optimize tertiary binding interactions and to ensure cleavage at the phosphodiester bond corresponding to the 5' splice site. Substitution of sulfur for the nonbridging pro-RP oxygen atom at the normal cleavage site has no effect on (kcat/Km)S but decreases the fraction of cleavage at the normal site in reactions catalyzed by the -3A mutant ribozyme, which has all three A residues of J1/2 removed. Thus, the ribozyme chooses where to cleave S after rate-limiting binding of S, indicating that docking can change after binding and suggesting that the ribozyme could act processively. Indeed, it is shown that the +2A ribozyme cleaves at one position along an RNA substrate and then, before releasing that RNA product, cleaves it again.(ABSTRACT TRUNCATED AT 400 WORDS)     

Regulation of fatty acid 18O exchange catalyzed by pancreatic carboxylester lipase. 1. Mechanism and kinetic properties.

The exchange of 18O between H2O and long-chain free fatty acids is catalyzed by pancreatic carboxylester lipase (EC 1.1.1.13). For palmitic, oleic, and arachidonic acid in aqueous suspension and for 13,16-cis,cis-docosadienoic acid (DA) in monomolecular films, carboxyl oxygens were completely exchanged with water oxygens of the bulk aqueous phase. With enzyme at either substrate or catalytic concentrations in the argon-buffer interface, the exchange of DA oxygens obeyed a random sequential mechanism, i.e., 18O,18O-DA in equilibrium with 18O,16O-DA in equilibrium with 16O,16O-DA. This indicates that the dissociation of the enzyme-DA complex is much faster than the rate-limiting step in the overall exchange reaction. Kinetic analysis of 18O exchange showed a first-order dependence on surface enzyme and DA concentrations, i.e., the reaction was limited by the acylation rate. The values of kcat/Km, 0.118 cm2 pmol-1 s-1, for the exchange reaction was comparable to that for methyl oleate hydrolysis and 5-fold higher than that for cholesteryl oleate hydrolysis in monolayers [Bhat, S., & Brockman, H. L. (1982) Biochemistry 21, 1547]. Thus, fatty acids are good "substrates" for carboxylester lipase. With substrate levels of carboxylester lipase in the interfacial phase, the acylation rate constant kcat/Km was 200-fold lower than that obtained with catalytic levels of enzyme. This suggests a possible restriction of substrate diffusion in the protein-covered substrate monolayer.     

Mouse protoporphyrinogen oxidase. Kinetic parameters and demonstration of inhibition by bilirubin.

The penultimate step of haem biosynthesis, the oxidation of protoporphyrinogen to protoporphyrin, was examined with purified murine hepatic protoporphyrinogen oxidase (EC 1.3.3.4) in detergent solution. The kinetic parameters for the two-substrate (protoporphyrinogen and oxygen) reaction were determined. The limiting Km for protoporphyrinogen when oxygen is saturating is 6.6 microM, whereas the Km for oxygen with saturating concentrations of protoporphyrinogen is 125 microM. The kcat. for the overall reaction is 447 h-1. The ratio of kcat. to the Km for protoporphyrinogen is approx. 20-fold greater than the kcat./Km,O2 ratio. The ratio of protoporphyrin formed to dioxygen consumed is 1:3. Ubiquinone-6, ubiquinone-10 and dicoumarol stimulate protoporphyrinogen oxidase activity at low concentrations (less than 15 microM), whereas coenzyme Q0 and menadione show no activation at these concentrations. Above 30 microM, all five quinones inhibit the enzyme activity. FAD does not significantly affect the activity of the enzyme. Bilirubin, a product of haem catabolism, is shown to be a competitive inhibitor of the penultimate enzyme of the haem-biosynthetic pathway, protoporphyrinogen oxidase, with a calculated Ki of 25 microM. The terminal enzyme of haem-biosynthetic pathway, namely ferrochelatase, is not inhibited by bilirubin at concentrations over double the Ki value for the oxidase. In contrast with other enzymic systems, the toxicity of bilirubin is not reversed by binding to albumin.