Silylation reaction of dextran: effect of experimental conditions on silylation yield,regioselectivity, and chemical stability of silylated dextrans

The controlled synthesis of biodegradable copolymers of dextran grafted with aliphatic polyesters first requires the preparation of polysaccharide derivatives soluble in organic solvents. Silylation of dextran can thus lead to such organosoluble derivatives and allows the polymerization of cyclic esters initiated from the nonsilylated OH functions. Silylation of dextran was studied in DMSO by different reactants such as 1,1,1,3,3,3-hexamethyldisilazane (HMDS) in the presence of various catalysts and N,O-bis(trimethylsilyl)acetamide (BSA). According to the silylating agent and the used experimental conditions, it was possible to obtain highly or totally silylated dextrans. In parallel, an investigation of the chemical stability of the dextran chain during silylation was performed. Thus, it was found that, when used at 50 degrees C, HMDS with or without catalysts gives a relatively high silylation yield and does not alter the dextran chain length, whereas at 80 degrees C, dextran degradation was observed. BSA is a very good silylating agent, which allows reaching 100% silylation even at 50 degrees C but provokes the degradation of the polysaccharide chains. The work was completed by a study of the reactivity order of the glucosidic OH functions toward silylation reaction. This order was found to be (OH(2) > OH(4) > OH(3)) as already reported for other reactions. 2D-NMR of highly silylated dextrans demonstrated that they are constituted of both quantitatively silylated glucose units and two types of disilylated ones.     

Comparative acyl specificities for transfer and selective uptake of high density lipoprotein cholesteryl esters

This study compares the specificities of selective uptake and transfer mediated by plasma cholesteryl ester transfer protein (CETP) for various species of cholesteryl esters in high density lipoproteins (HDL). [3H]Cholesterol was esterified with a series of variable chain length saturated acids and a series of variably unsaturated 18-carbon acids. These were incorporated into synthetic HDL particles along with 125I-labeled apoA-I as a tracer of HDL particles and [14C]cholesteryl oleate as an internal standard for normalization between preparations. Selective uptake by Y1-BS1 mouse adrenal cortical tumor cells was most extensively studied, but uptake by human HepG2 hepatoma cells and fibroblasts of human, rat, and rabbit origin were also examined. Acyl chain specificities for selective uptake and for CETP-mediated transfer were conversely related; selective uptake by all cell types decreased with increasing acyl chain length and increased with the extent of unsaturation of C18 chains. In contrast, CETP-mediated transfer increased with acyl chain length, and decreased with unsaturation of C18 chains. The specificities of human and rabbit CETP were also compared, and were found to differ little. Associated experiments showed that HDL-associated triglycerides, traced by [3H]glyceryl trioleyl ether, were selectively taken up but at a lesser rate than cholesteryl esters. The mechanism of this uptake appears to be the same as for selective uptake of cholesteryl esters.     

Boradiazaindacene dyes for technology of biological microchips

A number of boradiazaindacene dyes containing a carboxyl group separated from a fluorophore by two methylene units were synthesized. The compounds have narrow spectral bands with absorption maxima at 480–530 nm and fluorescence maxima at 500–550 nm. Succinimide esters of these compounds and the corresponding fluorescent-labeled oligonucleotides were also prepared. Boradiazaindacene dyes can be used as fluorescent labels for oligonucleotides for analysis of melting curves of duplexes on microchips either by themselves or in combination with Texas Red. They can also be applied for labeling primers for polymerase chain reaction.     

Boradiazaindacene dyes for technology of biological microchips

A number of boradiazaindacene dyes containing a carboxyl group separated from a fluorophore by two methylene units were synthesized. The compounds have narrow spectral bands with absorption maxima at 480-530 nm and fluorescence maxima at 500-550 nm. Succinimide esters of these compounds and the corresponding fluorescent-labeled olgionucleotides were also prepared. Boradiazaindacene dyes can be used as fluorescent labels for oligonucleotides for analysis of melting curves of duplexes on microchips either by themselves or in combination with Texas Red. They can also be applied for labeling primers for polymerase chain reaction.     

Lubricating and waxy esters, I. Synthesis, crystallization, and melt behavior of linear monoesters

Four pure jojoba wax-like esters (JLEs), having carbon chain length of 36, 40 (two isomers) and 44, were prepared by Steglish esterification of fatty acids (or acid chlorides) with fatty alcohols at room temperature. Calorimetric and diffraction data was used to elucidate the phase behavior of the esters. The primary thermal parameters (crystallization and melting temperatures) obtained from the DSC of the symmetrical molecules correspond well with the carbon numbers of the JLEs. However, the data also suggests that carbon number is not the only factor since the symmetry of the molecule also plays a significant role in the phase behavior. Overall, the JLEs show very little polymorphic activity at the experimental conditions used, suggesting that they are likely to transform the same way during melting as well as crystallization, a characteristic which may be useful in designing new waxes and lubricants. The XRD data clearly show that the solid phase in all samples consists of a mixture of a β-phase and a β'-phase; fully distinguishable by their characteristic diffraction peaks. Subtle differences between the subcell patterns and phase development of the samples were observed. Different layering of the samples was also observed, understandably because of the chain length differences between the compounds. The long spacings were perfectly linearly proportional to the number of carbon atoms. The length of the ester layers with n carbon atoms can be calculated by a formula similar to that used for the layers in linear alkane molecules.     

Molecular recognition between insulin and dextran encapsulated gold nanoparticles

Insulin is a peptide hormone that can regulate the metabolism of carbohydrates and lipids. This hormone is closely related to glucose‐uptake in cells and can control blood glucose levels. Dextran is a polysaccharide composed of glucose units. In this study, we discovered that dextran‐encapsulated gold nanoparticles (AuNPs@Dextran) and nanoclusters (AuNCs@Dextran) can be used to recognize insulin. The dissociation constant of insulin toward AuNPs@Dextran was estimated to be ～5.3 × 10^?6 M. The binding site on insulin toward the dextran on the nanoprobes was explored as well. It was found that the sequence of numbers 1–22 on the insulin B chain can interact with the dextran encapsulated nanoprobes. Additionally, we also demonstrated that the dextran‐encapsulated nanoprobes could be used as concentration probes to selectively enrich trace amounts of insulin (～1 pM) from serum samples. Copyright © 2016 John Wiley & Sons, Ltd.     

Partitioning of pristinamycins in aqueous two-phase systems: A first step toward the development of antibiotic production by extractive fermentation

The partitioning of pristinamycins was studied in dextran and polyethylene glycol (PEG) aqueous two-phases systems. Pristinamycins partitioned preferentially into the PEG-rich top phase. The partition coefficient was independent of molar mass of PEG and dextran and of antibiotic concentration, but, increased exponentially with the tieline length of the system. Partition of pristinamycins was greatly improved when fatty acids esters of PEG were mixed with PEG. In such mixtures, the partition of coefficient increased up to a value of 24, dependent on the carbon chain length of fatty acids and the modified PEG concentrations. Moreover, in such system, the two groups of pristinamycins, I and II, were extracted in accordance with their hydrophobicity. Recovery of pristinanamycins produced by Streptomyces pritinaespiralis in a fermentation broth was achieved with a dextran/PEG system. Cells were confined into the bottom phase and pristinamycins partitioned in the top phase. However, due to binding of the pristinamycins to the cells, the partition coefficient was slightly lower than of pure antibiotics solutions. (c) 1994 John Wiley & Sons, Inc.     

Synthesis and characterization of a new polysaccharide-graft-polymethacrylate copolymer for three-dimensional hybrid hydrogels

Hybrid materials constituted by hydrophobic and hydrophilic biocompatible macromolecules are useful for biomedical applications. In this context, a well-known acrylic monomer (methyl methacrylate) was polymerized and grafted onto the polysaccharide dextran by the use of ceric ammonium nitrate as a redox initiator in aqueous nitric acid medium. The effects of concentrations of dextran, acrylic monomer, and ceric ions on the copolymerization yields were investigated in detail. The obtained polymers were studied by solubility measurements, Fourier transform infrared spectrometry, (13)C nuclear magnetic resonance spectroscopy, and viscosimetric analysis. Interestingly, we found conditions to form transparent and homogeneous thin films or 3D structures with hybrid properties. Indeed, the copolymer, but not dextran or PMMA, could be dissolved in water/THF (20/80 v/v). The thermomechanical properties of the resulting copolymer analyzed by differential scanning calorimetry and dynamic mechanical analysis showed the occurrence of a single glass-transition temperature and a marked difference with the two homopolymers. The cytocompatibility of the copolymer with human endothelial cells was evidenced by the normal cell adhesion, proliferation, and morphology after 5 days in culture on these gels. In conclusion, this type of copolymer with hybrid properties of two biocompatible macromolecules could be of great interest as a 3D scaffold or for coating in biomedical applications.     

Effect of acyl donor chain length on isoquercitrin acylation and biological activities of corresponding esters

The enzymatic acylation of isoquercitrin with fatty acid esters of various carbon chain lengths was carried out in 2-methyl-2-butanol using Novozym 435^®. The conversion yield and the initial rate decreased from 66% to 38% and from 17.7 to 10.1 μmol/h respectively, as the carbon chain of the acyl donor increased from C4 to C18. Isoquercitrin acylated derivatives showed higher xanthine oxidase inhibition activities than isoquercitrin. This property increased with the lipophilicity of the derivative esters. The scavenging activity of isoquercitrin esters against ABTS and DPPH radicals decreased with the acyl chain length. Conversely, for esters from C6 to C18, a linear growing relationship can be established between the chain length and the superoxide radical scavenging activity. Furthermore, an improved antiproliferative effect on Caco2 cancer cells was induced by addition of isoquercitrin esters comparing with isoquercitrin.     

Protein resistance of dextran and dextran-poly(ethylene glycol) copolymer films

The protein resistance of dextran and dextran-poly(ethylene glycol) (PEG) copolymer films was examined on an organosilica particle-based assay support. Comb-branched dextran-PEG copolymer films were synthesized in a two step process using the organosilica particle as a solid synthetic support. Particles modified with increasing amounts (0.1-1.2 mg m(-2)) of three molecular weights (10,000, 66,900, 400,000 g mol(-1)) of dextran were found to form relatively poor protein-resistant films compared to dextran-PEG copolymers and previously studied PEG films. The efficacy of the antifouling polymer films was found to be dependent on the grafted amount and its composition, with PEG layers being the most efficient, followed by dextran-PEG copolymers, and dextran alone being the least efficient. Immunoglobulin gamma (IgG) adsorption decreased from ～5 to 0.5 mg m(-2) with increasing amounts of grafted dextran, but bovine serum albumin (BSA) adsorption increased above monolayer coverage (～2 mg m(-2)) indicating ternary adsorption of the smaller protein within the dextran layer.     

Characterization of a dextranolytic biotype of Flavobacterium multivorum from soil

Bacteria obtained by enrichment on dextran as sole carbon source before plating, or by direct plating of soil suspensions on dextran agar, included a yellow, non-motile, Gram negative rod with distinctive morphology and ultrastructure in negatively stained preparations under the electron microscope. The 16 isolates obtained all showed asymmetric division. In a small proportion of the population a phenomenon resembling budding resulted in the release of spherical cells. The isolates were compared with Flavobacterium breve , in which a similar morphology has been observed, but were clearly distinct on physiological grounds. The collection of strains formed a moderately uniform phenotype similar to, but generally more active biochemically, than F. multivorum ; all produced acid from dextran and grew on dextran as sole carbon source. Seven of the isolates produced pits in pectate gel at neutral and alkaline pH, but none broke down cellulose or chitin. Flavobacterium multivorum which was originally described from human clinical sources can be readily isolated from soil by the dextran enrichment technique.     

Protein resistance of dextran and dextran-poly(ethylene glycol) copolymer films

The protein resistance of dextran and dextran-poly(ethylene glycol) (PEG) copolymer films was examined on an organosilica particle-based assay support. Comb-branched dextran-PEG copolymer films were synthesized in a two step process using the organosilica particle as a solid synthetic support. Particles modified with increasing amounts (0.1–1.2 mg m^?2) of three molecular weights (10,000, 66,900, 400,000 g mol^?1) of dextran were found to form relatively poor protein-resistant films compared to dextran-PEG copolymers and previously studied PEG films. The efficacy of the antifouling polymer films was found to be dependent on the grafted amount and its composition, with PEG layers being the most efficient, followed by dextran-PEG copolymers, and dextran alone being the least efficient. Immunoglobulin gamma (IgG) adsorption decreased from ～5 to 0.5 mg m^?2 with increasing amounts of grafted dextran, but bovine serum albumin (BSA) adsorption increased above monolayer coverage (～2 mg m^?2) indicating ternary adsorption of the smaller protein within the dextran layer.     

Alternating bioactivity of polymeric layer-by-layer assemblies: anticoagulation vs procoagulation of human blood

The layer-by-layer assembly between cationic chitosan and anionic dextran sulfate was analyzed quantitatively by a quartz crystal microbalance technique in the absence and presence of 0.2, 0.5, and 1 M NaCl in the polymer solution. The apparent film thickness increased upon increasing the NaCl concentration. The anti- versus procoagulant activity of these films against whole human blood was studied by the immersion of a substrate into blood for 30 min incubation time at 37 degrees C. The substrate was coated with films of varying NaCl concentrations and assembly step numbers. There was a critical concentration for the alternating activity; above a concentration of 0.5 M NaCl, both anti- and procoagulation could be observed on the dextran sulfate and chitosan surfaces, respectively. The underlying layer of the assembly was necessary for this alternating activity; after a five-step assembly, the activity was realized. The adsorption of a cationic dye (methylene blue) onto the films revealed that the anionic-charge density derived from dextran sulfate on the film surface was linearly increased with increased NaCl concentration. There was a critical charge density of the dextran sulfate for the anticoagulant activity. An assembly was also constructed from a combination of chitosan and heparin, but the activity was different from that of the former system; strong anticoagulant activity was observed even on the chitosan surface. We suggest that the polymer species and/or the assembly conditions are key factors for realizing the alternating bioactivities of films prepared by the layer-by-layer assembly.     

Hydrophobic surface properties of erythrocytes studied by affinity partition in aqueous two-phase systems

Summary Erythrocytes from various species have been partitioned in aqueous two-phase systems consisting of water, dextran, poly-(ethylene glycol), salt and buffer. The terminal hydroxyl groups of the latter polymer were esterified with palmitic, oleic, linoleic and linolenic acids, as well as with deoxycholic acid. In a two-phase system containing unesterified poly(ethylene glycol) the erythrocytes are exclusively in the dextran-rich lower phase. When the poly(ethylene glycol) is esterified the red blood cells collect at the interface and/or in the poly(ethylene glycol)-rich upper phase depending on the type and concentration of esterified acid. Palmitate ester is most effective in increasing the affinity of the cells for the upper phase, followed by oleate, linolate, linolenate, and deoxycholate esters. The partition behaviour of erythrocytes from various species differs considerably. Two groups can be distinguished: one consisting of erythrocytes from dog, guinea pig and rat, the other from human, sheep and rabbit. This division can be correlated to the content of sphingomyelin and phosphatidyl choline in the erythrocyte membranes.     

Significance of lipoidal estradiol in human mammary tumors

Incubations of p-nitrophenyl fatty acyl esters and estradiol-17 beta fatty acyl 17-esters with porcine esterase, human mammary tumor cytosol and rat uterine cytosol leads to ester hydrolysis of compounds with short chain fatty acids. Esters with long chain fatty acids show no hydrolysis except in the presence of Tween 80. Short chain fatty acid esters have a higher binding potency to the estrogen receptor than long chain fatty acid esters. Extraction of the nuclear receptor peak sedimenting at 4.6S and identification of the steroid showed that about 90% of the radioactivity was associated with estradiol and only 10% with estradiol esters. These studies show that estradiol fatty acyl esters act as a storage form from which estradiol is released by enzymatic hydrolysis.     

Low molecular weight dextran: Immobilization of cells of Leuconostoc mesenteroides KIBGE HA1 on calcium alginate beads

Dextran is a long chain polymer of d-glucose produced by different bacterial strains including Leuconostoc, Streptococcus and Acetobacter. The bacterial cells from Leuconostoc mesenteroides KIBGE HA1 were immobilized on calcium alginate for dextran production. It was observed that dextran production increases as the temperature increases and after reaching maxima (30 °C) production started to decline. It was also observed that at 50 °C free cells stopped producing dextran, while immobilized cells continued to produce dextran even after 60 °C and still not exhausted. It was found that when 10 g% substrate (sucrose) was used, maximum dextran production was observed. Immobilized cells produced dextran upto 12 days while free cells stopped producing dextran only after 03 days. Molecular mass distribution of dextran produced by immobilized cells is low as compared to free cells.     

Synthesis of enzyme-degradable, peptide-cross-linked dextran hydrogels

Hydrogels derived from synthetic polymers have been previously engineered to degrade under the activity of matrix metalloproteinases (MMPs). It is believed that these systems can act as extracellular-matrix (ECM) equivalents mimicking the degradation and remodeling of the ECM through the activity of cell-secreted enzymes. In this study, MMP-sensitive hydrogels derived from dextran were developed. In order to avoid the incorporation of hydrolyzable esters often introduced in dextran modification strategies, the polysaccharide was modified with p-maleimidophenyl isocyanate (PMPI) thereby introducing maleimide functionalities in the backbone and resulting in dextran derivatized with p-maleimidophenyl isocyanate (Dex-PMPI). This strategy was favored to separate out the effects of random hydrolysis and enzymatic digestion in the degradation of the dextran hydrogels. A peptide cross-linker, derived from collagen and susceptible to gelatinase A (MMP-2) digestion, was synthesized with bifunctional cysteine termini and used to cross-link the Dex-PMPI. These hydrogels were found to be hydrolytically stable for more than 200 days yet degraded either within 30 h when exposed to bacterial collagenase or within 16 days when exposed to human MMP-2, demonstrating enzymatic-mediated digestion of the peptide cross-links. Further modification of the cross-linked hydrogels with laminin-derived peptides enhanced cell adhesion and survival, demonstrating the potential of these materials for use in tissue engineering applications.     

Dextran Nanoparticle Synthesis and Properties

Dextran is widely exploited in medical products and as a component of drug-delivering nanoparticles (NPs). Here, we tested whether dextran can serve as the main substrate of NPs and form a stable backbone. We tested dextrans with several molecular masses under several synthesis conditions to optimize NP stability. The analysis of the obtained nanoparticles showed that dextran NPs that were synthesized from 70 kDa dextran with a 5% degree of oxidation of the polysaccharide chain and 50% substitution with dodecylamine formed a NP backbone composed of modified dextran subunits, the mean diameter of which in an aqueous environment was around 100 nm. Dextran NPs could be stored in a dry state and reassembled in water. Moreover, we found that different chemical moieties (e.g., drugs such as doxorubicin) can be attached to the dextran NPs via a pH-dependent bond that allows release of the drug with lowering pH. We conclude that dextran NPs are a promising nano drug carrier.     

Substrate specificity and kinetic properties of enzymes belonging to the hormone-sensitive lipase family: comparison with non-lipolytic and lipolytic carboxylesterases

We have studied the kinetics of hydrolysis of triacylglycerols, vinyl esters and p-nitrophenyl butyrate by four carboxylesterases of the HSL family, namely recombinant human hormone-sensitive lipase (HSL), EST2 from Alicyclobacillus acidocaldarius, AFEST from Archeoglobus fulgidus, and protein RV1399C from Mycobacterium tuberculosis. The kinetic properties of enzymes of the HSL family have been compared to those of a series of lipolytic and non-lipolytic carboxylesterases including human pancreatic lipase, guinea pig pancreatic lipase related protein 2, lipases from Mucor miehei and Thermomyces lanuginosus, cutinase from Fusarium solani, LipA from Bacillus subtilis, porcine liver esterase and Esterase A from Aspergilus niger. Results indicate that human HSL, together with other lipolytic carboxylesterases, are active on short chain esters and hydrolyze water insoluble trioctanoin, vinyl laurate and olive oil, whereas the action of EST2, AFEST, protein RV1399C and non-lipolytic carboxylesterases is restricted to solutions of short chain substrates. Lipolytic and non-lipolytic carboxylesterases can be differentiated by their respective value of K(0.5) (apparent K(m)) for the hydrolysis of short chain esters. Among lipolytic enzymes, those possessing a lid domain display higher activity on tributyrin, trioctanoin and olive oil suggesting, then, that the lid structure contributes to enzyme binding to triacylglycerols. Progress reaction curves of the hydrolysis of p-nitrophenyl butyrate by lipolytic carboxylesterases with lid domain show a latency phase which is not observed with human HSL, non-lipolytic carboxylesterases, and lipolytic enzymes devoid of a lid structure as cutinase.