Integrity of refolded and reoxidized gelatin-binding fragments of fibronectin.

The gelatin-binding region of fibronectin is easily isolated as a stable and functional 42-kDa fragment (42-kDa GBF) containing four type I "finger" modules and two type II "kringle-like" modules arranged in the order I6-II1-II2-I7-I8-I9, where the numbers designate the order of these modules in each of the two polypeptide chains. Each module forms an independently folded domain stabilized by two disulfide bonds. Reduction of disulfides caused large changes in the intrinsic fluorescence and abolished the gelatin-binding activity of 42-kDa GBF and two nonoverlapping gelatin-binding subfragments, 30-kDa GBF (I6-II1-II2-I7) and 21-kDa GBF (I8-I9). However, high yields of active material could be regenerated, without diluting the protein, by dialysis into GdmCl followed by slow overnight removal of GdmCl while maintaining the redox potential with a mixture of oxidized and reduced glutathione. Fluorescence spectroscopic analysis indicated that the tertiary structure and thermodynamic stability of the refolded fragments were similar to those of the originals. The refolded fragments were quantitatively indistinguishable from the originals with respect to their dissociation constants for binding to a fluorescent-labeled collagen fragment. The results suggest that all or most of the cystines, a total of 24 in 42-kDa GBF, are correctly paired in the refolded products and that the tertiary structure was completely recovered. The fact that the 30- and 21-kDa fragments bind with a similar affinity proves the existence of at least two nonoverlapping sites in 42-kDa GBF that recognize gelatin.     

Domain structure and interactions of the type I and type II modules in the gelatin-binding region of fibronectin. All six modules are independently folded

The gelatin-binding region of fibronectin is isolated easily as a stable and functional 42 kDa fragment containing four type I "finger" modules and two type II "kringle-like" modules arranged in the order I6-II1-II2-I7-I8-I9. This fragment exhibits a single reversible melting transition near 64 degrees C in TBS buffer (0.02 M-Tris buffer containing 0.15 M-NaCl, pH 7.4). The transition is characterized by a calorimetric to van't Hoff enthalpy ratio of 1.6, suggesting a complex domain structure. A 30 kDa fragment with the same NH2 terminus (I6-II1-II2-I7) melts reversibly near 65 degrees C with delta Hcal/delta HvH = 1.3, also consistent with the presence of more than one domain. To elucidate further the domain structure, three non-overlapping subfragments were prepared and characterized with respect to their unfolding induced by heat and guanidinium chloride. The three subfragments, each containing two modules, are designated from amino or carboxyl-terminal location as 13 kDa (I6-II1) 16 kDa (II2-I7) and 21 kDa (I8-I9) according to their apparent Mr in SDS/polyacrylamide gel electrophoresis. All three subfragments exhibited reversible transitions in TBS buffer, behaving in the calorimeter as single co-operative units with delta Hcal/delta HvH close to unity. However, the specific enthalpies and changes in heat capacity associated with the melting of all fragments and subfragments in TBS buffer were low compared to those of most compact globular proteins, suggesting that not all modules are represented. When titrated with guanidinium chloride at 25 degrees C, all fragments exhibited monophasic reversible unfolding transitions detected by changes in fluorescence. Heating in the presence of 6 M-guanidinium chloride revealed three additional transitions not seen in the absence of denaturants. These transitions have been assigned to three of the four type I finger modules (I6, I7 and I9), one of which (I6) was isolated and shown to retain a compact structure as stable as that observed for this module within the parent fragments. Two other modules (II2 and I7) are destabilized when separated from their neighbors. Thus, despite their small size (50 to 60 amino acid residues), all six of the modules in the gelatin-binding region of fibronectin form independently folded domains, three of which (I6, I7 and I9) are unusually stable. Evidence is provided that four of the six modules interact with each other in the parent fragment. This interaction may explain previously noted disruptions in the otherwise uniform strand-like images seen in electron micrographs of fibronectin.     

Human fibronectin and MMP-2 collagen binding domains compete for collagen binding sites and modify cellular activation of MMP-2.

The region of fibronectin (FN) surrounding the two type II modules of FN binds type I collagen. However, little is known about interactions of this collagen binding domain with other collagen types or extracellular matrix molecules. Among several expressed recombinant (r) human FN fragments from the collagen binding region of FN, only rI6-I7, which included the two type II modules and both flanking type I modules, bound any of several tested collagens. The rI6-I7 interacted specifically with both native and denatured forms of types I and III collagen as well as denatured types II, IV, V and X collagen with apparent K(d) values of 0.2-3.7 x 10(-7) M. Reduction with DTT disrupted the binding to gelatin verifying the functional requirement for intact disulfide bonds. The FN fragments showed a weak, but not physiologically important, binding to heparin, and did not bind elastin or laminin. The broad, but selective range of ligand interactions by rI6-I7 mirrored our prior observations for the collagen binding domain (rCBD) from matrix metalloproteinase-2 (MMP-2) [J. Biol. Chem. 270 (1995) 11555]. Subsequent experiments showed competition between rI6-I7 and rCBD for binding to gelatin indicating that their binding sites on this extracellular matrix molecule are identical or closely positioned. Two collagen binding domain fragments supported cell attachment by a beta1-integrin-dependent mechanism although neither protein contains an Arg-Gly-Asp recognition sequence. Furthermore, activation of MMP-2 and MMP-9 was greatly reduced for HT1080 fibrosarcoma cells cultured on either of the fibronectin fragments compared to full-length FN. These observations imply that the biological activities of FN in the extracellular matrix may involve interactions with a broad range of collagen types, and that exposure to pathologically-generated FN fragments may substantially alter cell behavior and regulation.     

Gelatin binding to the 6F1(1)F2(2)F2 fragment of fibronectin is independent of module-module interactions

Fibronectin, a large modular protein, interacts with many other proteins in the extracellular matrix and on the cell surface. It has previously been shown that interactions between noncontiguous modules exist in the collagen binding region. It is shown here that the interaction between the sixth type I module ((6)F1) and the second type II module ((2)F2) can be disrupted by mutation of a residue in the intermodule interface of the (6)F1(1)F2(2)F2 fragment. The perturbation of the interface and the binding of collagen-derived peptides to individual modules were assessed by high-resolution nuclear magnetic resonance (NMR) spectroscopy. Cooperativity between the modules in binding ligand was assessed by analytical gelatin affinity chromatography of the mutant and wild-type proteins. Differential scanning calorimetry (DSC) was used to probe the influence of the interface on module stability. It is shown that while the (6)F1-(2)F2 interface confers significant thermal stability to the (2)F2 module, it has little effect on gelatin binding activity of the (6)F1(1)F2(2)F2 fragment.     

The role of carbohydrate-binding module (CBM) repeat of a multimodular xylanase (XynX) from Clostridium thermocellum in cellulose and xylan binding

A non-cellulosomal xylanase from Clostridium thermocellum, XynX, consists of a family-22 carbohydratebinding module (CBM22), a family-10 glycoside hydrolase (GH10) catalytic module, two family-9 carbohydrate-binding modules (CBM9-I and CBM9-II), and an S-layer homology (SLH) module. E. coli BL21(DE3) (pKM29), a transformant carrying xynX', produced several truncated forms of the enzyme. Among them, three major active species were purified by SDS-PAGE, activity staining, gel-slicing, and diffusion from the gel. The truncated xylanases were different from each other only in their C-terminal regions. In addition to the CBM22 and GH10 catalytic modules, XynX(1) had the CBM9-I and most of the CBM9-II, XynX(2) had the CBM9-I and about 40% of the CBM9-II, and XynX(3) had about 75% of the CBM9-I. The truncated xylanases showed higher binding capacities toward Avicel than those toward insoluble xylan. XynX(1) showed a higher affinity toward Avicel (70.5%) than XynX(2) (46.0%) and XynX(3) (42.1%); however, there were no significant differences in the affinities toward insoluble xylan. It is suggested that the CBM9 repeat, especially CBM9-II, of XynX plays a role in xylan degradation in nature by strengthening cellulose binding rather than by enhancing xylan binding.     

Characterization of the enzyme activity of an extracellular metalloprotease (VMC) from Vibrio mimicus and its C-terminal deletions

To investigate the enzymatic properties of Vibrio mimicus metalloprotease, the mature metalloprotease gene (vmc) was overexpressed in Escherichia coli and the recombinant protein (rVMC61) was purified by metal affinity chromatography. rVMC61 showed maximum activity at about 37 degrees C, pH 8. The purified rVMC61 was very specific toward collagen substrates, such as gelatin, type I, II, and III collagens and synthetic peptides (Cbz-GPLGP and Cbz-GPGGPA). But it did not show degrading activity toward other biological proteins including lysozyme, lactoferrin and bovine serum albumin. rVMC61 also showed cytotoxicity against CHSE-214 fish cells. To examine the role of the C-terminal region of rVMC61, the 3' end of the metalloprotease gene (vmc) was digested serially with exonuclease III. The truncated vmc derivatives encoding 57-42 kDa of the protease were isolated and overexpressed in E. coli. The collagenase activities of truncated proteins were investigated using gelatin as substrate. Deletion of 100 amino acids from the C-terminus resulted in loss of gelatin degrading activity. However, deletion of 67 amino acids from the C-terminus did not affect its gelatin degrading activity.     

Molecular dissection of the alpha-dystroglycan- and integrin-binding sites within the globular domain of human laminin-10

The adhesive interactions of cells with laminins are mediated by integrins and non-integrin-type receptors such as alpha-dystroglycan and syndecans. Laminins bind to these receptors at the C-terminal globular domain of their alpha chains, but the regions recognized by these receptors have not been mapped precisely. In this study, we sought to locate the binding sites of laminin-10 (alpha5beta1gamma1) for alpha(3)beta(1) and alpha(6)beta(1) integrins and alpha-dystroglycan through the production of a series of recombinant laminin-10 proteins with deletions of the LG (laminin G-like) modules within the globular domain. We found that deletion of the LG4-5 modules did not compromise the binding of laminin-10 to alpha(3)beta(1) and alpha(6)beta(1) integrins but completely abrogated its binding to alpha-dystroglycan. Further deletion up to the LG3 module resulted in loss of its binding to the integrins, underlining the importance of LG3 for integrin binding by laminin-10. When expressed individually as fusion proteins with glutathione S-transferase or the N-terminal 70-kDa region of fibronectin, only LG4 was capable of binding to alpha-dystroglycan, whereas neither LG3 nor any of the other LG modules retained the ability to bind to the integrins. Site-directed mutagenesis of the LG3 and LG4 modules indicated that Asp-3198 in the LG3 module is involved in the integrin binding by laminin-10, whereas multiple basic amino acid residues in the putative loop regions are involved synergistically in the alpha-dystroglycan binding by the LG4 module.     

Structural independence of ligand-binding modules five and six of the LDL receptor

The low-density lipoprotein receptor (LDLR) is the primary mechanism for the uptake of plasma cholesterol into cells and serves as a prototype for a growing family of cell surface receptors. These receptors all utilize tandemly repeated LDL-A modules to bind their ligands. Each LDL-A module is about 40 residues long, has six conserved cysteine residues, and contains a conserved acidic region near the C-terminus which serves as a calcium-binding site. The structure of the interface presented for ligand binding by these modules, and the basis for their specificity and affinity in ligand binding, is not yet known. We have purified recombinant molecules corresponding to LDL-A modules five (LR5), six (LR6), and the module five-six pair (LR5-6) of the LDL receptor. Calcium is required to establish native disulfide bonds and to maintain the structural integrity of LR5, LR6, and the LR5-6 module pair. Folding studies of the I189D and D206Y mutations within LR5 indicate that each change leads to misfolding of the module, explaining the previous observation that each of these changes mimics the functional effect of deletion of the entire module [Russell, D. W., Brown, M. S., and Goldstein, J. L. (1989) J. Biol. Chem. 264, 21682-21688]. By fluorescence, the affinity of LR5 for calcium, which is crucial for folding and function of these modules, remains approximately 40 nM whether LR6 is attached. Comparison of proton and multidimensional heteronuclear NMR spectra of individual modules to those of the module pair indicates that most of the significant spectroscopic changes lie within the linker region between modules and that little structural interaction occurs between the cores of modules five and six in the 5-6 pair. These findings strongly support a model in which each module is essentially structurally independent of the other.     

Identification of collagen binding domain residues that govern catalytic activities of matrix metalloproteinase-2 (MMP-2)

An innovative approach to enhance the selectivity of matrix metalloproteinase (MMP) inhibitors comprises targeting these inhibitors to catalytically required substrate binding sites (exosites) that are located outside the catalytic cleft. In MMP-2, positioning of collagen substrate molecules occurs via a unique fibronectin-like domain (CBD) that contains three distinct modular collagen binding sites. To characterize the contributions of these exosites to gelatinolysis by MMP-2, seven MMP-2 variants were generated with single, or concurrent double and triple alanine substitutions in the three fibronectin type II modules of the CBD. Circular dichroism spectroscopy verified that recombinant MMP-2 wild-type (WT) and variants had the same fold. Moreover, the MMP-2 WT and variants had the same activity on a short FRET peptide substrate that is hydrolyzed independently of CBD binding. Among single-point variants, substitution in the module 3 binding site had greatest impact on the affinity of MMP-2 for gelatin. Simultaneous substitutions in two or three CBD modules further reduced gelatin binding. The rates of gelatinolysis of MMP-2 variants were reduced by 20–40% following single-point substitutions, by 60–75% after double-point modifications, and by > 90% for triple-point variants. Intriguingly, the three CBD modules contributed differentially to cleavage of dissociated α-1(I) and α-2(I) collagen chains. Importantly, kinetic analyses (k_cat/K_m) revealed that catalysis of a triple-helical FRET peptide substrate by MMP-2 relied primarily on the module 3 binding site. Thus, we have identified three collagen binding site residues that are essential for gelatinolysis and constitute promising targets for selective inhibition of MMP-2.     

TSG-6 binds via its CUB_C domain to the cell-binding domain of fibronectin and increases fibronectin matrix assembly.

Human plasma fibronectin binds with high affinity to the inflammation-induced secreted protein TSG-6. Fibronectin binds to the CUB_C domain of TSG-6 but not to its Link module. TSG-6 can thus act as a bridging molecule to facilitate fibronectin association with the TSG-6 Link module ligand thrombospondin-1. Fibronectin binding to TSG-6 is divalent cation-independent and is conserved in cellular fibronectins. Based on competition binding studies using recombinant and proteolytic fragments of fibronectin, TSG-6 binding localizes to type III repeats 9-14 of fibronectin. This region of fibronectin contains the Arg-Gly-Asp sequence recognized by alpha5beta1 integrin, but deletion of that sequence does not prevent TSG-6 binding, and TSG-6 does not inhibit cell adhesion on fibronectin substrates mediated by this integrin. This region of fibronectin is also involved in fibronectin matrix assembly, and addition of TSG-6 enhances exogenous and endogenous fibronectin matrix assembly by human fibroblasts. Therefore, TSG-6 is a high affinity ligand that can mediate fibronectin interactions with other matrix components and modulate some interactions of fibronectin with cells.     

Probing the integrin-binding site within the globular domain of laminin-511 with the function-blocking monoclonal antibody 4C7.

In an attempt to elucidate the integrin-binding site within laminin-511 (alpha5beta1gamma1), we mapped the epitope for mAb 4C7, which recognizes the globular (G) domain of the laminin alpha5 chain and inhibits binding of integrin alpha6beta1 to laminin-511, using a series of recombinant laminin-511 mutants with deletions or substitutions in the G domain. Deletion of the LG2-5 modules only partially compromised the 4C7 binding activity, while deletion of all 5 LG modules completely abrogated the activity, indicating that the epitope for 4C7 resides in the LG1 module. In support of this conclusion, 4C7 reactivity was abolished when the LG1 module of laminin-511 was swapped with the corresponding module of laminin-111, but the reactivity was retained after swapping the LG2 or LG3 module. Despite the requirement of LG1 for 4C7 binding, a recombinant LG1 module failed to bind to 4C7 when expressed alone or in tandem with LG2, but exhibited significant 4C7 binding activity when expressed as an array of LG1-3. These results indicate that 4C7 recognizes an epitope in the LG1 module, whose active conformation is stabilized in the context of the LG1-3 modules. Despite their 4C7 binding activities, neither the recombinant LG1-3 fragment nor the LG2 and LG3 swap mutants were capable of binding to integrin alpha6beta1. Thus, the integrin binding activity does not necessarily parallel the 4C7 reactivity, and possibly requires a strictly defined conformation of the LG1 module which can only be attained within an array of the intact LG1-3 modules connected to the preceding coiled-coil domain.     

An anti-EGF monoclonal antibody that detects intramolecular communication in factor IX

Coagulation factor IX contains a gamma-carboxyglutamic acid (Gla) module, two epidermal growth factor-like (EGF) modules, and a serine protease region. We have characterized a mouse monoclonal antibody that binds the N-terminal EGF-like module of human factor IX with high affinity. Studies of recombinant factor IX mutants indicated that the epitope is located in the C-terminal end of the EGF-like module, which is consistent with the binding being non-Ca(2+)-dependent. The antibody bound factor IXa (K(D) = 7.6 x 10(-10) M) with about 10-fold higher affinity than factor IX (K(D) = 6.2 x 10(-9) M). Binding of the antibody to factor IXa did not affect the amidolytic activity of the protein, nor was binding affected by active site inhibition of factor IXa. These results are consistent with long-range interactions between the serine protease region and the N-terminal EGF-like module in factor IX.     

Characterization of recombinant human insulin-like growth factor binding proteins 4, 5, and 6 produced in yeast.

The insulin-like growth factor binding protein (IGFBP) family comprises six structurally distinct, but highly homologous proteins. They have been identified in serum and other biological fluids, tissue extracts, and cell culture media. We have recently cloned cDNAs encoding human IGFBP-4, -5, and -6 and have now expressed these BPs in yeast as ubiquitin (Ub)-IGFBP fusion proteins. Western ligand blotting with 125I-IGF II under nonreducing conditions of recombinant human (rh) IGFBP-containing yeast lysates revealed specific binding bands for IGFBP-4, -5, and -6 at apparent molecular masses of 24-26, 30-32, and 24-26 kDa, respectively, indicating processing of the fusion proteins. High-performance liquid chromatography-purified rhIGFBPs had virually the same amino acid composition, amino acid number, and NH2-terminal sequences as the native BPs. Except for the affinity of rhIGFBP-6 for IGF I (Ka = 8.5 x 10(8) M-1), the affinity constants of the three IGFBPs for IGF I and II lie between 1.7 and 3.3 x 10(10) M-1, i.e. 25-100 times higher than the IGF I and II affinities of the type I IGF receptor. When present in excess, rhIGFBP-4, -5, and -6 inhibited IGF I- and II-stimulated DNA and glycogen synthesis in human osteoblastic cells, but rhIGFBP-6 had only a weak inhibitory effect on IGF I in agreement with its relatively lower IGF I affinity constant. The results of this study show that the primary effect of the three rhIGFBPs is the attenuation of IGF activity and suggest that IGFBPs contribute to the control of IGF-mediated cell growth and metabolism.     

Specific interactions between F1 adhesin of Streptococcus pyogenes and N-terminal modules of fibronectin

Protein F1 is a surface protein of Streptococcus pyogenes that mediates high affinity binding to fibronectin (Fn) and facilitates S. pyogenes adherence and penetration into cells. The smallest portion of F1 known to retain the full binding potential of the intact protein is a stretch of 49 amino acids known as the functional upstream domain (FUD). Synthetic and recombinant versions of FUD were labeled with fluorescein isothiocyanate and used in fluorescence anisotropy experiments. These probes bound to Fn or the 70-kDa fragment of Fn with dissociation constants of 8-30 nm. Removal of the N-terminal seven residues of FUD did not cause a change in binding affinity. Further N- or C-terminal truncations resulted in complete loss of binding activity. Analysis of recombinant versions of the 70-kDa fragment that lacked one or several type I modules indicates that residues 1-7 of the 49-mer bind to type I modules I1 and I2 of the 27-kDa subfragment and the C-terminal residues bind to modules I4 and I5. Fluorescein isothiocyanate-labeled 49-mer also bound with lower affinity to large Fn fragments that lack the five type I modules of the 27-kDa fragment but contain the other seven type 1 modules of Fn. These results indicate that, although FUD has a general affinity for type I modules, high affinity binding of FUD to Fn is mediated by specific interactions with N-terminal type I modules.     

Production and purification of self-assembling peptides in Ralstonia eutropha

Self-assembling peptides have emerged as an attractive scaffold material for tissue engineering, yet the expense associated with solid phase chemical synthesis has limited their broad use. In addition, the fidelity of chemical synthesis constrains the length of polypeptides that can be produced homogeneously by this method. Template-derived biosynthesis by recombinant DNA technology may overcome both of these problems. However, recovery of polypeptides from recombinant protein expression systems typically involves multi-step purification schemes. In this study, we report an integrated approach to recombinantly produce and purify self-assembling peptides from the recently developed expression host Ralstonia eutropha. The purification is based on the specific affinity of carbohydrate binding modules (CBMs) to cellulose. In a first step, we identified CBMs that express well in R. eutropha by assembling a fusion library of green fluorescent protein (GFP) and CBMs and determining the fluorescence of cell-free extracts. Three GFP::CBM fusions were found to express at levels similar to GFP alone, of which two CBMs were able to mediate cellulose binding of the GFP::CBM fusion. These two CBMs were then fused to multiple repeats of the self-assembling peptide RAD16-I::E (N-RADARADARADARADAE-C). The fusion protein CBM::E::(RAD16-I::E)4 was expressed in R. eutropha and purified using the CBM's affinity for cellulose. Subsequent proteolytic cleavage with endoproteinase GluC liberated RAD16-I::E peptide monomers with similar properties to the chemically synthesized counterpart RAD16-I.     

Selective Runx2-II deficiency leads to low-turnover osteopenia in adult mice

Runx2 transcribes Runx2-II and Runx2-I isoforms with distinct N-termini. Deletion of both isoforms results in complete arrest of bone development, whereas selective loss of Runx2-II is sufficient to form a grossly intact skeleton with impaired endochondral bone development. To elucidate the role of Runx2-II in osteoblast function in adult mice, we examined heterozygous Runx2-II (Runx2-II(+/-)) and homozygous Runx2-II (Runx2-II(-/-))-deficient mice, which, respectively, lack one or both copies of Runx2-II but intact Runx2-I expression. Compared to wild-type mice, 6-week-old Runx2-II(+/-) had reduced trabecular bone volume (BV/TV%), cortical thickness (Ct.Th), and bone mineral density (BMD), decreased osteoblastic and osteoclastic markers, lower bone formation rates, impaired osteoblast maturation of BMSCs in vitro, and significant reductions in mechanical properties. Homozygous Runx2-II(-/-) mice had a more severe reduction in BMD, BV/TV%, and Ct.Th, and greater suppression of osteoblastic and osteoclastic markers than Runx2-II(+/-) mice. Non-selective Runx2(+/-) mice, which have an equivalent reduction in Runx2 expression due to the lack one copy of Runx2-I and II, however, had an intermediate reduction in BMD. Thus, selective Runx2-II mutation causes diminished osteoblastic function in an adult mouse leading to low-turnover osteopenia and suggest that Runx2-I and II have distinct functions imparted by their different N-termini.     

Solution structure of a pair of modules from the gelatin-binding domain of fibronectin

BACKGROUND: Fibronectin has a role in vital physiological processes such as cell migration during embryogenesis and wound healing. It mediates the attachment of cells to extracellular matrices that contain fibrous collagens. The affinity of fibronectin for native collagen and denatured collagen (gelatin) is located within a 42 kDa domain that contains four type 1 (F1) and two type 2 (F2) modules. A putative ligand-binding site has been located on an isolated F2 module, but the accessibility of this site in the intact domain is unknown. Thus, structural studies of module pairs and larger fragments are required for a better understanding of the interaction between fibronectin and collagen. RESULTS: The solution structure of the 101-residue 6F1 1F2 module pair, which has a weak affinity for gelatin, has been determined by multidimensional NMR spectroscopy. The tertiary structures determined for each module conform to the F1 and F2 consensus folds established previously. The experimental data suggest that the two modules interact via a small hydrophobic interface but may not be tightly associated. Near-random-coil 1H NMR chemical shifts and fast dynamics for backbone atoms in the linker indicate that this region is unlikely to be involved in the overall stabilisation of the module pair. CONCLUSIONS: The modules in the 6F1 1F2 module pair interact with each other via a flexible linker and a hydrophobic patch, which lies on the opposite side of the 1F2 module to the putative collagen-binding site. The intermodule interaction is relatively weak and transient.     

The two subtype 1 somatostatin receptors of rainbow trout, Tsst1A and Tsst1B, possess both distinct and overlapping ligand binding and agonist-induced regulation features

In the present study, two isoforms of somatostatin receptor subtype one, previously obtained from the brain of rainbow trout, Tsst1A and Tsst1B, were stably transfected in the Chinese hamster ovary cell line (CHO-K1) and their binding properties were characterized. High affinity binding of somatostatin by expressed receptors was saturable and ligand selective. Both Tsst1A and Tsst1B preferentially bound peptides derived from preprosomatostatin I (PPSS I; e.g., SS-14-I) over those derived from PPSS II (containing Tyr7, Gly10-SS-14-I at their C-terminus; e.g., SS-25-II). The rank order of ligand affinities for Tsst1A was SS-28-I>SS-14-I>SS-26-I?SS-28-II>SS-14-II>SS-25-II. The rank order for Tsst1B was SS-14-I>SS-28-I>SS-26-1?SS-28-II>SS-25-II>SS-14-II. Agonist-induced regulation of Tsst1A and Tsst1B was also investigated. After 30 min of SS-14-I exposure, both Tsst1A and Tsst1B underwent rapid internalization; ca. 60% of membrane Tsst1A was internalized and only about 40% of membrane Tsst1B was internalized. Prolonged agonist exposure (up to 48 h) induced up-regulation of membrane-expressed Tsst1A, but had no effect on Tsst1B. These results indicate that Tsst1s display both distinct and overlapping ligand binding and agonist-induced regulation features. Such features may form the basis of ligand-selection and have important consequences on target organ responsiveness.     

Epithelial sodium channel (ENaC) is multi-ubiquitinated at the cell surface

MMP-2 (matrix metalloproteinase 2) contains a CBD (collagen-binding domain), which is essential for positioning gelatin substrate molecules relative to the catalytic site for cleavage. Deletion of the CBD or disruption of CBD-mediated gelatin binding inhibits gelatinolysis by MMP-2. To identify CBD-binding sites on type I collagen and collagen peptides with the capacity to compete CBD binding of gelatin and thereby inhibit gelatinolysis by MMP-2, we screened a one-bead one-peptide combinatorial peptide library with recombinant CBD as bait. Analyses of sequences from the CBD-binding peptides pointed to residues 715-721 in human alpha1(I) collagen chain as a binding site for CBD. A peptide (P713) including this collagen segment was synthesized for analyses. In SPR (surface plasmon resonance) assays, the CBD and MMP-2(E404A), a catalytically inactive MMP-2 mutant, both bound immobilized P713 in a concentration-dependent manner, but not a scrambled control peptide. Furthermore, P713 competed gelatin binding by the CBD and MMP-2(E404A). In control assays, neither of the non-collagen binding alkylated CBD or MMP-2 with deletion of CBD (MMP-2DeltaCBD) bound P713. Consistent with the exodomain functions of the CBD, P713 inhibited approximately 90% of the MMP-2 gelatin cleavage, but less than 20% of the MMP-2 activity on a peptide substrate (NFF-1) which does not require the CBD for cleavage. Confirming the specificity of the inhibition, P713 did not alter MMP-2DeltaCBD or MMP-8 activities. These experiments identified a CBD-binding site on type I collagen and demonstrated that a corresponding synthetic peptide can inhibit hydrolysis of type I and IV collagens by competing CBD-mediated gelatin binding to MMP-2.     

The C region of human insulin-like growth factor (IGF) I is required for high affinity binding to the type 1 IGF receptor

We have produced and characterized the binding properties of three structural analogs of human insulin-like growth factor I (hIGF-I). These analogs are [1-62]hIGF-I, an analog lacking the carboxyl-terminal 8-amino acid D region of hIGF-I; [1-27, Gly4, 38-70]hIGF-I, an analog in which residues 28-37 of the C region of hIGF-I are replaced by a 4-reside glycine bridge; and [1-27,Gly4,38-62]hIGF-I, an analog with the C region glycine replacement and a D region deletion. The removal of the D region of hIGF-I has little effect on binding to the type 1 and type 2 insulin-like growth factor (IGF) receptors. [1-62]hIGF-I has 2-fold higher affinity for the insulin receptor and 4-fold higher affinity for IGF serum-binding proteins. The replacement of the C region of hIGF-I with a four-glycine span results in a 30-fold loss of affinity for the type 1 IGF receptor. However this analog has near normal affinity for the type 2 IGF receptor, the insulin receptor, and IGF serum-binding proteins. Incorporating the C region glycine replacement and the D region deletion into one analog does not affect binding to either the type 2 receptor or to IGF serum-binding proteins. As predicted from the single deletion analogs [1-27,Gly4,38-62]hIGF-I has reduced affinity for the type 1 IGF receptor (approximately 40-fold) and increased affinity for the insulin receptor (5-fold). These data indicate that determinants in the C region of hIGF-I are involved in maintaining high affinity binding to the type 1 IGF receptor and that neither the C region nor the D region are required for high affinity binding to the type 2 IGF receptor or to IGF serum-binding proteins.