Complementarity of ecological goal functions

This paper summarizes, in the framework of network environ analysis, a set of analyses of energy-matter flow and storage in steady-state systems. The network perspective is used to codify and unify ten ecological orientors or extremal principles: maximum power (Lotka), maximum storage (J?rgensen-Mejer), maximum empower and emergy (Odum), maximum ascendency (Ulanowicz), maximum dissipation (Schneider-Kay), maximum cycling (Morowitz), maximum residence time (Cheslak-Lamarra), minimum specific dissipation (Onsager, Prigogine), and minimum empower to exergy ratio (Bastianoni-Marchettini). We show that, seen in this framework, these seemingly disparate extrema are all mutually consistent, suggesting a common pattern for ecosystem development. This pattern unfolds in the network organization of systems.     

Ranking the indicators of building performance and the users’ risk via Analytical Hierarchy Process (AHP): Case of Malaysia

The need to optimise the performance of buildings has increased consequently due to the expansive supply of facilities in higher education building (HEB). Hence, a proper performance assessment as a proactive measure may help university building in achieving performance optimization. However, the current maintenance programs or performance evaluation in the HEB is a systemic and cyclic process where maintenance is considered as an operational issue and not as opposed to a strategic issue. Hence, this paper proposed a Building Performance Risk Rating Tool (BPRT) as an improved measure for building performance evaluation by addressing the users' risk in health and safety aspects. The BPRT was developed from the result of a rating index using the Analytical Hierarchy Process (AHP) method. A total of 12 facilities management (FM) experts and practitioners were involved in the rating process. The subjective weightings were analysed by using the AHP computer software programme, the Expert Choice 11. The result of the AHP had successfully assigned weighting scores to all performance-risk indicators, with five indicators ranked as the most critical indicators; structural stability (14.9%), fire prevention services (9.1%), building-related illnesses (7.4%), emergency exits (6.8%), and electrical services (6.3%). The final indication to the assessed building using the BPRT provided a rating classification in terms of the following: “Excellent”, “Good”, “Medium”, “Low”, or “Poor”, which suggested further actions to improve the performance of the building, as well as to mitigate the users’ health and safety risks. Hence, the establishment of the BPRT was successfully employed as an aid of improvement towards the current performance assessment of HEB by emerging the concept of building performance and risk into a numerical strategic approach.     

Ecology,thermodynamics and H.T. Odum's conjectures

The central rôle of energy in all life processes has led to the development of numerous hypotheses, conjectures and theories on the relationships between thermodynamics and ecological processes. In this paper we examine the theoretical and empirical support for these developments, and in particular for the widely published set of thermodynamic conjectures developed by H.T. Odum, in which the maximum power principle is put forward as a generic feature of evolution in ecosystems. Although they are widely used, we argue that many of the ecological studies that have adopted the ideas encapsulated in Odum's work have done so without being aware of some of the fundamental problems underlying this approach. We discuss alternative ways in which a general available-work concept could be constructed for use as a numeraire in an energy-centered ecological theory or paradigm. In so doing, we examine what is meant by material accessibility and energy stocks and flows with respect to traditional food web and food chain theories, and relate these to results from the evolutionary dynamics of ecosystems. We conclude that the various forms and uses of energy bound up in essential ecosystem processes present a formidable obstacle to obtaining an operational definition of a general, aggregated available-work concept, a prerequisite for the systems approach of Odum and others. We also show that the prototypical derivations of the maximum power principle, and its interpretation, are contradicted on many scales both by empirical data and models, thereby invalidating the maximum power principle as a general principle of ecological evolution. The conclusions point to the fundamental problem of trying to describe ecosystems in a framework which has a one-dimensional currency.     

Effects of Cadmium on Chlorophyll Content,Photochemical Efficiency,and Photosynthetic Intensity of Canna indica Linn.

The effects of cadmium (Cd²⁺) on growth status, chlorophyll (Chl) content, photochemical efficiency, and photosynthetic intensity were studied on Canna indica Linn. Plant specimens that were produced from a constructed wetland and precultivated hydroponically in 20 L of 1/10 Hoagland solution under greenhouse conditions for 1 week were exposed to cadmium in concentrations of 0, 0.4, 0.8, 1.6 and 3.2 mg L^―1 Cd²⁺, respectively. The results show that leaves were injured in the Cd²⁺ solution by the third day of exposure and the injury became more serious with an increase in the applied heavy metal. Under 3.2 mg L^―1 Cd²⁺ treatment, growth retardation, the decrease of chlorophyll content from 0.70 to 0.43 mg g^―1 FW, and a decrease in Chl a/b ratio from 2.0 to 1.2 were observed. Chl a was more sensitive than Chl b to Cd²⁺ stress. The decrease was the same with photochemical efficiency. Photosynthetic intensity decreased by 13.3% from 1.5×10⁴ μmol m^―2s^―1 CO₂ in control to 1.3×10⁴ μmol m^―2s^―1 CO₂ in the treatment of 3.2 mg L^―1. Because Canna species are used in heavy metal phytoremediation, these results show that C. indica can tolerate 0.4 to 0.8 mg L^―1 Cd²⁺. Therefore, it is a potential species for phytoremediation of cadmium with some limitations only at higher concentrations.     

Productivity, carbon dioxide uptake and net energy return of microalgal bubble column photobioreactors

This work examined the energy return of Chlorella vulgaris and Dunaliella tertiolecta cultivated in a gas-sparged photobioreactor design where the power input for sparging was manipulated (10, 20, and 50 W m⁻³). Dry weight, organic carbon and heating values of the biomass were measured, plus a suite of variables including Fv/Fm and dissolved oxygen. A model for predicting the higher heating value of microalgal biomass was developed and used to measure the energetic performance of batch cultivations. High power inputs enhanced maximum biomass yields, but did not improve the energy return. Cultivation in 10 W m⁻³ showed up to a 39% higher cumulative net energy return than 50 W m⁻³, and increased the cumulative net energy ratio up to fourfold. The highest net energy ratio for power input was 19.3 (D. tertiolecta, 12% CO₂, 10 W m⁻³). These systems may be a sustainable method of biomass production, but their effectiveness is sensitive to operational parameters.     

Growth of <Emphasis Type="Italic">Salinispora tropica</Emphasis> strains CNB440, CNB476, and NPS21184 in nonsaline,low-sodium media

Effective wastewater treatment using microbial fuel cells (MFCs) will require a better understanding of how operational parameters and solution chemistry affect treatment efficiency, but few studies have examined power generation using actual wastewaters. The efficiency of wastewater treatment of a beer brewery wastewater was examined here in terms of maximum power densities, Coulombic efficiencies (CEs), and chemical oxygen demand (COD) removal as a function of temperature and wastewater strength. Decreasing the temperature from 30°C to 20°C reduced the maximum power density from 205 mW/m² (5.1 W/m³, 0.76 A/m²; 30°C) to 170 mW/m² (20°C). COD removals (R _COD) and CEs decreased only slightly with temperature. The buffering capacity strongly affected reactor performance. The addition of a 50-mM phosphate buffer increased power output by 136% to 438 mW/m², and 200 mM buffer increased power by 158% to 528 mW/m². In the absence of salts (NaCl), maximum power output varied linearly with wastewater strength (84 to 2,240 mg COD/L) from 29 to 205 mW/m². When NaCl was added to increase conductivity, power output followed a Monod-like relationship with wastewater strength. The maximum power (P _max) increased in proportion to the solution conductivity, but the half-saturation constant was relatively unaffected and showed no correlation to solution conductivity. These results show that brewery wastewater can be effectively treated using MFCs, but that achievable power densities will depend on wastewater strength, solution conductivity, and buffering capacity.     

Unidirectional fluxes in saturated single-file pores of biological and artificial membranes I. Pores containing no more than one vacancy

A theoretical treatment of isotope fluxes in filled single-file pores is given. The treatment is confined to pores permitting only one vacancy at a time. Tracer flux, unidirectional fluxes and net flux are calculated. The exponent n which is obtained by representing the ratio of unidirectional fluxes as a power of the electrochemical activity-ratio proves to be closely related with m, the number of sites per pore. The minimum and maximum values of n are m?1 and m. It is shown that measurement of n provides sufficient information to determine m if the energetic properties of sites and barriers do not change too much with varying concentrations. Unlike the unidirectional fluxes, the net fluxes yield no direct information about the number of sites. The concentration dependence of the net fluxes, however, can be used to discriminate between the two limiting cases, n = m?1 and n = m. It is interesting with regard to the instantaneous potassium currents of nerve membranes that a suitable choice of the energetic parameters of a filled pore leads to a quasi-linearity of the net flux-voltage curves, which is only slightly affected by variation of the external concentration.     

Growth characteristics of aquatic macrophytes cultured in nutrient-enriched water: II. Azolla,Duckweed, and Salvinia

Seasonal growth characteristics and biomass yield potential of 4 small-leaf, floating, aquatic macrophytes cultured in nutrient nonlimiting conditions were evaluated for central Florida’s climatic conditions. Biomass yields were found to be 10.6, 11.3, 16.1, and 32.1 t (dry wt) har^?1 yr^?1, respectively, for azolla (Azolla caroliniana), giant duckweed (Spirodela polyrhiza), common duckweed (Lemna minor), and salvinia (Salvinia rotundifolia). Operational plant density was in the range of 10–80 g dry wt m^?2 for azolla, 10–88 g dry wt m^?2 for giant duckweed, 10–120 g dry wt m^?2 for common duckweed, and 35–240 g dry wt m^?2 for salvinia. Specific growth rate (% increase per day) was maximum at low plant densities and decreased as the plant density increased. Results suggest that small-leaf, floating plants may not be suitable in monoculture biomass production systems because of low biomass yields, but they may be suitable for inclusion in poly culture systems with larger aquatic plants. The high N content (crude protein = 20–33%) of small-leaf,floating plants suggests the use of biomass as animal feed.     

Growth, gas exchange, and water-use efficiency response of two young apple cultivars to drought stress in two scion-one rootstock grafting system

The combination of two scion-one rootstock was used for two apple cultivars, ‘Pink Lady’ and ‘Qinguan’, budded on the same, one-year-old Malus hupehensis (Pamp.) Rehd. to reduce the impact of root and pot size and in order to understand the growth, water-use efficiency (WUE), and chlorophyll fluorescence characteristics. The two-scion grafted trees were planted in plastic pots under two water regimes, i.e. 70% field capacity (FC) and 55% FC. Results indicated that different scions were affected differently by drought stress. ‘Pink Lady’ had higher net photosynthetic rate (P _N), stomatal conductance (g _s), and transpiration rate (E) compared with ‘Qinguan’ under both water treatments. However, ‘Qinguan’ had lower minimal fluorescence (F₀), higher maximum fluorescence (F_m), and higher maximum photochemical efficiency of photosystem II (F_v/F_m) than ‘Pink Lady’ at 55% FC. Moreover, ‘Qinguan’ had larger shoot dry mass (ShDM) and higher intrinsic WUE_I than ‘Pink Lady’ under both water status. Gas-exchange and growth parameters, except for P _N and scion diameter, were significantly affected by the cultivar and water treatment. At 70% FC, ShDM was significantly correlated with WUE_I. Moreover, WUE_I was negatively linearly correlated with g _s at either 70 or 55% FC. These results might indicate that ‘Pink Lady’ was more sensitive to drought than ‘Qinguan’. ‘Qinguan’ apple was able to improve WUE more than ‘Pink Lady’ under both well-watered and drought conditions. The growth parameters and photosynthetic capacity of two different scions showed that the combination of double scion-one rootstock might eliminate the influences of the rootstock and pot size.     

Indicating landscape fragmentation using L–Z complexity

Landscape metrics have been widely applied to measure landscape fragmentation in recent years. However, those metrics or indicators have their own specific application. Searching better performance metric or method to quantify the landscape fragmentation is still challenging issue. In this paper an L–Z complexity method for the measurement of landscape fragmentation was presented. After introducing the algorithm of L–Z complexity and converting landscape structure data to symbolic sequence, the implementation of this methodology was demonstrated using synthetic data generated by SIMMAP software and real urban land use data. The results show that the L–Z complexity can efficiently detect differentiation of landscape fragmentation controlled by SIMMAP parameters m, n and p. As to the application in real landscape, L–Z complexity is also a good indicator to identify the landscape fragmentation, which integrates some metrics information of landscape composition, shape and configuration. L–Z complexity provides an alternative approach to measuring the landscape fragmentation.     

Primary producers and nutrient loading in Silver Springs,FL, USA

The characteristics and dynamics of primary producer communities of Silver Springs was examined to compare with that observed by Odum [Odum, H.T., 1957. Trophic structure and productivity of Silver Springs, Florida. Ecol. Monogr. 27, 55–112.] as a means of evaluating the impacts of changes that have occurred over time. The Silver Springs ecosystem is considered an ecosystem at risk, where nitrate levels have more than doubled over the past 50 years. The spatial and temporal abundance and distribution of above-sediment primary producers in Silver Springs, FL, USA, was estimated on a system-wide basis using a GIS platform. The results of study suggest that while the Sagittaria component of Silver Springs has remained relatively stable, epiphyte and benthic algal mat community biomass has expanded, particularly benthic forms, like Lyngbya. However, we argue for caution in weighing the significance of long-term comparisons of system-wide biomass in light of considerable spatial heterogeneity in aquatic primary producer communities.     

Simultaneous wastewater treatment,electricity generation and biomass production by an immobilized photosynthetic algal microbial fuel cell

A photosynthetic algal microbial fuel cell (PAMFC) was constructed by the introduction of immobilized microalgae (Chlorella vulgaris) into the cathode chamber of microbial fuel cells to fulfill electricity generation, biomass production and wastewater treatment. The immobilization conditions, including the concentration of immobilized matrix, initial inoculation concentration and cross-linking time, were investigated both for the growth of C. vulgaris and power generation. It performed the best at 5 % sodium alginate and 2 % calcium chloride as immobilization matrix, initial inoculation concentration of 10⁶ cell/mL and cross-linking time of 4 h. Our findings indicated that C. vulgaris immobilization was an effective and promising approach to improve the performance of PAMFC, and after optimization the power density and Coulombic efficiency improved by 258 and 88.4 %, respectively. Important parameters such as temperature and light intensity were optimized on the performance. PAMFC could achieve a COD removal efficiency of 92.1 %, and simultaneously the maximum power density reached 2,572.8 mW/m³ and the Coulombic efficiency was 14.1 %, under the light intensity of 5,000 lux and temperature at 25 °C.     

The Ecological Role of the Vaquita, Phocoena sinus, in the Ecosystem of the Northern Gulf of California

From an ecosystem management perspective, analysis of the functional roles of species is a challenge. It is valuable to determine which species are irreplaceable within a given community based on their contribution to the system’s organization. This study relates the emergent functional and structural indices of biological groups estimated from a trophic model of the Northern Gulf of California to identify the roles of these groups in the ecosystem context, with a particular focus on the role of the vaquita, an endemic porpoise in critically endangered status. The simulation of removing each group allowed the analysis of the removal’s functional effect on the ecosystem’s global attributes and organization (based on Ulanowicz’s ascendency concept). Groups from lower trophic levels (TL) were more related to complexity indicators, suggesting their contribution to the organization and structure of energy flows in the food web. Groups from intermediate TL had higher values of structural indexes, indicating their function in the control of flows throughout the network. The vaquita along with other marine mammals, aquatic birds, and some species of fish with a high TL contribute in a similar way to the order (for example, ascendency/capacity-of-development ratio) of the system, showing a relatively high value of ascendency (contribution of the group to the organization inherent to the ecosystem) and the change in ecosystem ascendency when they were removed. The vaquita, like marine and coastal birds, plays a small role in the ecosystem. But like them, it does contribute substantially to ecosystem organization. This study thus provides information potentially useful for management in understanding the species’ role and in reducing uncertainty in decision-making.     

Two Bacterial Small Heat Shock Proteins,IbpA and IbpB,Form a Functional Heterodimer

Small heat shock proteins (sHsps) are a conserved class of ATP-independent chaperones which in stress conditions bind to unfolded protein substrates and prevent their irreversible aggregation. Substrates trapped in sHsps-containing aggregates are efficiently refolded into native structures by ATP-dependent Hsp70 and Hsp100 chaperones. Most γ-proteobacteria possess a single sHsp (IbpA), while in a subset of Enterobacterales, as a consequence of ibpA gene duplication event, a two-protein sHsp (IbpA and IbpB) system has evolved. IbpA and IbpB are functionally divergent. Purified IbpA, but not IbpB, stably interacts with aggregated substrates, yet both sHsps are required to be present at the substrate denaturation step for subsequent efficient Hsp70-Hsp100-dependent substrate refolding. IbpA and IbpB interact with each other, influence each other’s expression levels and degradation rates. However, the crucial information on how these two sHsps interact and what is the basic building block required for proper sHsps functioning was missing. Here, based on NMR, mass spectrometry and crosslinking studies, we show that IbpA-IbpB heterodimer is a dominating functional unit of the two sHsp system in Enterobacterales. The principle of heterodimer formation is similar to one described for homodimers of single bacterial sHsps. β-hairpins formed by strands β5 and β7 of IbpA or IbpB crystallin domains associate with the other one's β-sandwich in the heterodimer structure. Relying on crosslinking and molecular dynamics studies, we also propose the orientation of two IbpA-IbpB heterodimers in a higher order tetrameric structure.     

Ontogenic time and worker longevity in the Australian stingless bee, Austroplebeia australis

Little is known about the biology and life cycle of the Australian stingless bee, Austroplebeia australis (Friese). The ontogenic times for developing offspring, as well as the longevity of adults, drive the overall life cycle of a social colony. The developmental times for brood within stingless bee species which build cluster-type nests, such as A. australis, are as yet unreported. A technique was developed whereby ‘donor’ brood cells were separated from the main brood cluster and ‘grafted’ into hive annexes, allowing workers from within the colony to access the brood ‘grafts’ for hygiene and maintenance activities, whilst enabling observation of developing brood. The mean ontogenic time for A. australis workers, maintained at ~27 °C, was 55 days, which is similar to that reported for other stingless bees. The maximum longevity of A. australis was determined by marking cohorts of worker bees within five colonies. Workers within all colonies demonstrated extended longevity, with an overall maximum longevity of 161 days, with the oldest bee living for 240 days. Extended longevity may result from evolutionary adaptations to the floral resource scarcity, which is regularly experienced in semi-arid, inland Australia, the natural habitat of A. australis.     

Efficient Deterministic Finite Automata Minimization Based on Backward Depth Information

Obtaining a minimal automaton is a fundamental issue in the theory and practical implementation of deterministic finite automatons (DFAs). A minimization algorithm is presented in this paper that consists of two main phases. In the first phase, the backward depth information is built, and the state set of the DFA is partitioned into many blocks. In the second phase, the state set is refined using a hash table. The minimization algorithm has a lower time complexity O(n) than a naive comparison of transitions O(n²). Few states need to be refined by the hash table, because most states have been partitioned by the backward depth information in the coarse partition. This method achieves greater generality than previous methods because building the backward depth information is independent of the topological complexity of the DFA. The proposed algorithm can be applied not only to the minimization of acyclic automata or simple cyclic automata, but also to automata with high topological complexity. Overall, the proposal has three advantages: lower time complexity, greater generality, and scalability. A comparison to Hopcroft’s algorithm demonstrates experimentally that the algorithm runs faster than traditional algorithms.     

Electricity production by an overflow-type wetted-wall microbial fuel cell

An overflow-type wetted-wall MFC (WWMFC) was developed to generate a stable voltage from acetate-based substrates. The maximum power density of 18.21 W/m³ was obtained. The power generation showed a saturation-type relationship as a function of initial COD, with a maximum power density (P_max) of 18.82 W/m³ and a saturation constant (K_s) of 227.4 mg/l. Forced air flowing through the cathode chamber had a negligible effect on power generation. Influent flow rate could greatly affect the power generation. The maximum power density was increased by 72.8% when the influent flow rate increased from 5 to 30 ml/min. In addition, increasing ionic strength did not affect the power density and internal resistance. Oxygen could be restrained to diffuse into the anode chamber effectively in the overflow-type WWMFC. And the overflow-type WWMFC could be scaled up conveniently in practical application.     

Habitat and food utilization of the Siberian chipmunk,Tamias sibiricus,in Korea

Compared to European countries where the Siberian chipmunk (Tamias sibiricus) is an invasive species, there is a paucity of information on the ecology and natural history of Korean populations. T. sibiricus is a native species with large populations in Korea. We conducted field research during January to December 2012 in a forest habitat located in Hongcheon-gun, Gangwon-do (37° 45′ 50″ N, 127° 50′ 52″ E) in central Korea. We used both radio-tracking and capture-recapture techniques to determine home range size and nocturnal shelters. We also excavated and measured burrows and analyzed food items from caches. The mean 95 % of kernel home range size for males was 16,586 m² (100 % of MCP?=?14,129 m²) and 4,432 m² (100 % of MCP?=?4,512 m²) for females. Burrow systems typically had a nest, latrine, and food caches with tunnels. Nocturnal shelters were uncommon and co-habiting for summer sleeping and winter torpor were also rare. The primary food items in caches were chestnuts (77.0 %), Mongolian oak acorns (12.1 %), and bird’s-foot trefoil (2.1 %). The information on the ecology and natural history of the Korean subspecies of Siberian chipmunks reported in this research shows significant differences from the ecological information for the subspecies in Hokkaido Japan.     

Elaboration and application of mathematical model for estimation of mould contamination of some building materials based on ergosterol content determination

The study presents a mathematical function describing a correlation between the amount of ergosterol and the number of colony-forming units (CFU) of mould contaminating selected building materials such as: a block of cellular concrete, gypsum—carton board and gypsum—carton board covered with emulsion paint. The dependence obtained for a particular material as well as an average dependence for all the investigated materials has been described by means of an exponential equation. It has been found out that there is high, statistically significant correlation between ergosterol content and CFU number of mould in all of the building materials. The correlation coefficients have ranged from r=0.790 to 0.933. The elaborated equation describing the above dependence can be applied to estimate mould contamination by means of culture methods within the range 10³–10⁸ CFU/m² of the surface. In addition, the estimated level of ergosterol in these materials has been shown to be the criterion by which to evaluate the degree of filamentous fungal contamination. It has been assessed that an ergosterol content exceeding the level of 3.96 mg/m² indicates the active development of mould. This criterion has been applied to evaluate several building materials i.e.: concrete, gypsum board, emulsion coatings, brick, plaster, wallpaper, glass wool, mineral wool and wood. No statistically significant differences have been observed between CFU number of mould calculated from a model equation on the basis of the ergosterol content and CFU number of mould experimentally determined by traditional methods. The results presented in this paper show that the elaborated equation of correlation between the ergosterol content and CFU number of mould can be applied to estimate mould contamination of different building materials, based on the determination of ergosterol.